Anthony Liguori [Wed, 23 Jan 2013 15:08:54 +0000 (09:08 -0600)]
Merge remote-tracking branch 'bonzini/scsi-next' into staging
# By Peter Lieven (3) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
scsi: Drop useless null test in scsi_unit_attention()
lsi: use qbus_reset_all to reset SCSI bus
scsi: fix segfault with 0-byte disk
iscsi: add support for iSCSI NOPs [v2]
iscsi: partly avoid iovec linearization in iscsi_aio_writev
iscsi: add iscsi_create support
scsi: Drop useless null test in scsi_unit_attention()
req was created by scsi_req_alloc(), which initializes req->dev to a
value it dereferences. req->dev isn't changed anywhere else.
Therefore, req->dev can't be null.
Drop the useless null test; it spooks Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Paolo Bonzini [Thu, 10 Jan 2013 14:08:05 +0000 (15:08 +0100)]
scsi: fix segfault with 0-byte disk
When a 0-sized disk is found, READ CAPACITY will return a
LUN NOT READY error. However, because it returns -1 instead
of zero, the HBA will call scsi_req_continue. This will
typically cause a segmentation fault or an assertion failure.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Lieven [Thu, 6 Dec 2012 09:46:47 +0000 (10:46 +0100)]
iscsi: add support for iSCSI NOPs [v2]
This patch will send NOP-Out PDUs every 5 seconds to the iSCSI target.
If a consecutive number of NOP-In replies fail a reconnect is initiated.
iSCSI NOPs help to ensure that the connection to the target is still operational.
This should not, but in reality may be the case even if the TCP connection is still
alive if there are bugs in either the target or the initiator implementation.
v2:
- track the NOPs inside libiscsi so libiscsi can reset the counter
in case it initiates a reconnect.
Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Lieven [Mon, 19 Nov 2012 14:58:31 +0000 (15:58 +0100)]
iscsi: partly avoid iovec linearization in iscsi_aio_writev
libiscsi expects all write16 data in a linear buffer. If the
iovec only contains one buffer we can skip the linearization
step as well as the additional malloc/free and pass the
buffer directly.
Reported-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Lieven [Sat, 17 Nov 2012 15:13:24 +0000 (16:13 +0100)]
iscsi: add iscsi_create support
This patch adds support for bdrv_create. This allows e.g.
to use qemu-img to convert from any supported device to
an iscsi backed storage as destination.
Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alon Levy [Mon, 21 Jan 2013 12:48:07 +0000 (14:48 +0200)]
qxl: change rom size to 8192
This is a simpler solution to 869981, where migration breaks since qxl's
rom bar size has changed. Instead of ignoring fields in QXLRom, which is what has
actually changed, we remove some of the modes, a mechanism already
accounted for by the guest. The modes left allow for portrait and
landscape only modes, corresponding to orientations 0 and 1.
Orientations 2 and 3 are dropped.
Added assert so that rom size will fit the future QXLRom increases via
spice-protocol changes.
This patch has been tested with 6.1.0.10015. With the newer 6.1.0.10016
there are problems with both "(flipped)" modes prior to the patch, and
the patch loses the ability to set "Portrait" modes. But this is a
separate bug to be fixed in the driver, and besides the patch doesn't
affect the new arbitrary mode setting functionality.
Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Test isn't useless. scsi_req_enqueue() may finish the request (will
actually happen for requests which don't trigger any I/O such as
INQUIRY), then call usb_msd_command_complete() which in turn will
set s->req to NULL after unref'ing it.
Tim Hardeck [Mon, 21 Jan 2013 10:04:45 +0000 (11:04 +0100)]
vnc: fix possible uninitialized removals
Some VncState values are not initialized before the Websocket handshake.
If it fails QEMU segfaults during the cleanup. To prevent this behavior
intialization checks are added.
Signed-off-by: Tim Hardeck <thardeck@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Tim Hardeck [Mon, 21 Jan 2013 10:04:44 +0000 (11:04 +0100)]
vnc: added initial websocket protocol support
This patch adds basic Websocket Protocol version 13 - RFC 6455 - support
to QEMU VNC. Binary encoding support on the client side is mandatory.
Because of the GnuTLS requirement the Websockets implementation is
optional (--enable-vnc-ws).
To activate Websocket support the VNC option "websocket"is used, for
example "-vnc :0,websocket".
The listen port for Websocket connections is (5700 + display) so if
QEMU VNC is started with :0 the Websocket port would be 5700.
As an alternative the Websocket port could be manually specified by
using ",websocket=<port>" instead.
Parts of the implementation base on Anthony Liguori's QEMU Websocket
patch from 2010 and on Joel Martin's LibVNC Websocket implementation.
Signed-off-by: Tim Hardeck <thardeck@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Tim Hardeck [Mon, 21 Jan 2013 10:04:43 +0000 (11:04 +0100)]
vnc: added buffer_advance function
Following Anthony Liguori's Websocket implementation I have added the
buffer_advance function to VNC and replaced all related buffer memmove
operations with it.
Signed-off-by: Tim Hardeck <thardeck@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
KONRAD Frederic [Mon, 14 Jan 2013 23:08:01 +0000 (00:08 +0100)]
virtio-bus: introduce virtio-bus
Introduce virtio-bus. Refactored transport device will create a bus which
extends virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
KONRAD Frederic [Mon, 14 Jan 2013 23:08:00 +0000 (00:08 +0100)]
qdev: add a maximum device allowed field for the bus.
Add a max_dev field to BusClass to specify the maximum amount of devices allowed
on the bus (has no effect if max_dev=0)
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 21 Jan 2013 19:22:43 +0000 (13:22 -0600)]
Merge remote-tracking branch 'quintela/thread.next' into staging
# By Juan Quintela (7) and Paolo Bonzini (6)
# Via Juan Quintela
* quintela/thread.next:
migration: remove argument to qemu_savevm_state_cancel
migration: Only go to the iterate stage if there is anything to send
migration: unfold rest of migrate_fd_put_ready() into thread
migration: move exit condition to migration thread
migration: Add buffered_flush error handling
migration: move beginning stage to the migration thread
qemu-file: Only set last_error if it is not already set
migration: fix off-by-one in buffered_rate_limit
migration: remove double call to migrate_fd_close
migration: make function static
use XFER_LIMIT_RATIO consistently
Protect migration_bitmap_sync() with the ramlist lock
Unlock ramlist lock also in error case
Anthony Liguori [Mon, 21 Jan 2013 13:32:22 +0000 (07:32 -0600)]
Merge remote-tracking branch 'stefanha/trivial-patches' into staging
# By Stefan Weil (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
hw/tpci200: Fix compiler warning (redefined symbol with MinGW)
configure: silence pkg-config's check for curses
acpitable: open the data file in binary mode
hw: Spelling fix in log message
Stefan Weil [Mon, 21 Jan 2013 06:49:51 +0000 (07:49 +0100)]
hw/tpci200: Fix compiler warning (redefined symbol with MinGW)
STATUS_TIMEOUT is defined in winnt.h:
CC hw/tpci200.o
hw/tpci200.c:34:0:
warning: "STATUS_TIMEOUT" redefined [enabled by default]
/usr/lib/gcc/x86_64-w64-mingw32/4.6/../../../../x86_64-w64-mingw32/include/winnt.h:1036:0:
note: this is the location of the previous definition
Use STATUS_TIME instead of STATUS_TIMEOUT as suggested by Alberto Garcia.
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Michael Tokarev [Thu, 17 Jan 2013 10:53:52 +0000 (14:53 +0400)]
acpitable: open the data file in binary mode
-acpitable {file|data}=file reads the content of file, but it is
in binary form, so the file should be opened usin O_BINARY flag.
On *nix it is a no-op, but on windows and other weird platform
it is really needed.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Anthony Liguori [Sun, 20 Jan 2013 17:01:10 +0000 (11:01 -0600)]
Merge remote-tracking branch 'stefanha/block' into staging
# By Kevin Wolf (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
dataplane: support viostor virtio-pci status bit setting
dataplane: avoid reentrancy during virtio_blk_data_plane_stop()
win32-aio: use iov utility functions instead of open-coding them
win32-aio: Fix memory leak
win32-aio: Fix vectored reads
aio: Fix return value of aio_poll()
ide: Remove wrong assertion
block: fix null-pointer bug on error case in block commit
Stefan Weil [Sat, 19 Jan 2013 19:23:51 +0000 (20:23 +0100)]
tci: Fix broken build (regression)
s390x-linux-user now also uses GETPC. Instead of adding it to the list of
targets which use GETPC, the macro is now defined unconditionally.
This avoids future build regressions like this one:
CC s390x-linux-user/target-s390x/int_helper.o
cc1: warnings being treated as errors
qemu/target-s390x/int_helper.c: In function ‘helper_divs32’:
qemu/target-s390x/int_helper.c:47: error: implicit declaration of function ‘GETPC’
qemu/target-s390x/int_helper.c:47: error: nested extern declaration of ‘GETPC’
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Andreas Färber [Fri, 18 Jan 2013 15:43:35 +0000 (16:43 +0100)]
block/raw-posix: Make hdev_aio_discard() available outside Linux
Fixes the build on OpenBSD among others.
Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Andreas Färber [Fri, 18 Jan 2013 18:30:13 +0000 (19:30 +0100)]
cpu-defs.h: Drop qemu_work_item prototype
Commit c64ca8140e9c21cd0d44c10fbe1247cb4ade8e6e (cpu: Move
queued_work_{first,last} to CPUState) moved the qemu_work_item fields
away. Clean up the now unused prototype.
Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell [Thu, 17 Jan 2013 20:04:16 +0000 (20:04 +0000)]
tcg/target-arm: Add missing parens to assertions
Silence a (legitimate) complaint about missing parentheses:
tcg/arm/tcg-target.c: In function ‘tcg_out_qemu_ld’:
tcg/arm/tcg-target.c:1148:5: error: suggest parentheses around
comparison in operand of ‘&’ [-Werror=parentheses]
tcg/arm/tcg-target.c: In function ‘tcg_out_qemu_st’:
tcg/arm/tcg-target.c:1357:5: error: suggest parentheses around
comparison in operand of ‘&’ [-Werror=parentheses]
which meant that we would mistakenly always assert if running
a QEMU built with debug enabled on ARM.
Signed-off-by: Peter Maydell <peter.maydelL@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
fw_cfg: Use void *, size_t instead of uint8_t *, uint32_t for blobs
Many callers pass size_t, which gets silently truncated to uint32_t.
Harmless, because all practical sizes are well below 4GiB. Clean it
up anyway. Size overflow now fails assertions.
Bonus: saves a whole bunch of silly casts.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Paolo Bonzini [Fri, 11 Jan 2013 23:42:53 +0000 (15:42 -0800)]
optimize: optimize using nonzero bits
This adds two optimizations using the non-zero bit mask. In some cases
involving shifts or ANDs the value can become zero, and can thus be
optimized to a move of zero. Second, useless zero-extension or an
AND with constant can be detected that would only zero bits that are
already zero.
The main advantage of this optimization is that it turns zero-extensions
into moves, thus enabling much better copy propagation (around 1% code
reduction). Here is for example a "test $0xff0000,%ecx + je" before
optimization:
In some cases TCG even outsmarts GCC. :) Here the input code has
"and $0x2,%eax + movslq %eax,%rbx + test %rbx, %rbx" and the optimizer,
thanks to copy propagation, does the following:
Paolo Bonzini [Fri, 11 Jan 2013 23:42:52 +0000 (15:42 -0800)]
optimize: track nonzero bits of registers
Add a "mask" field to the tcg_temp_info struct. A bit that is zero
in "mask" will always be zero in the corresponding temporary.
Zero bits in the mask can be produced from moves of immediates,
zero-extensions, ANDs with constants, shifts; they can then be
be propagated by logical operations, shifts, sign-extensions,
negations, deposit operations, and conditional moves. Other
operations will just reset the mask to all-ones, i.e. unknown.
[rth: s/target_ulong/tcg_target_ulong/]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Paolo Bonzini [Fri, 11 Jan 2013 23:42:51 +0000 (15:42 -0800)]
optimize: only write to state when clearing optimizer data
The next patch will add to the TCG optimizer a field that should be
non-zero in the default case. Thus, replace the memset of the
temps array with a loop. Only the state field has to be up-to-date,
because others are not used except if the state is TCG_TEMP_COPY
or TCG_TEMP_CONST.
[rth: Extracted the loop to a function.]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 19 Jan 2013 09:56:41 +0000 (09:56 +0000)]
Merge branch 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf:
PPC: KVM: Add support for EPR with KVM
openpic: export e500 epr enable into a ppc.c function
Update Linux kernel headers
PPC: e500: Change in-memory order of load blobs
PPC: Provide zero SVR for -cpu e500mc and e5500
PPC: E500: Calculate loading blob offsets properly
openpic: set mixed mode as supported
openpic: unify gcr mode mask updates
openpic: move gcr write into a function
Blue Swirl [Sat, 19 Jan 2013 09:55:46 +0000 (09:55 +0000)]
Merge branch 's390-for-upstream' of git://repo.or.cz/qemu/agraf
* 's390-for-upstream' of git://repo.or.cz/qemu/agraf:
s390: Add a hypercall registration interface.
target-s390x: Unregister reset callback on finalization
s390x: fix indentation
s390: Add CPU reset handler
s390x: Remove inline function ebcdic_put and related data from cpu.h
S390: Enable -cpu help and QMP query-cpu-definitions
s390: Move IPL code into a separate device
s390: new contributions GPLv2 or later
Stefan Weil [Tue, 1 Jan 2013 08:24:55 +0000 (08:24 +0000)]
s390x: Remove inline function ebcdic_put and related data from cpu.h
The function is only used in misc_helper.c, so move it to that file.
This reduces the size of debug executables (compiled without optimization)
because they get unused code and data for each compilation which includes
cpu.h.
Executables with optimization don't change their size.
ebcdic2ascii is currently unused and could be removed (not done here).
The array ascii2ebcdic must be accessed with an unsigned index, therefore
(int)ascii[i] was replaced by (uint8_t)ascii[i]. The old code would have
failed for a signed char less than 0. The current code only converts
"QEMU" and spaces to EBCDIC, so there is no problem today.
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Alexander Graf <agraf@suse.de>
S390: Enable -cpu help and QMP query-cpu-definitions
This enables qemu -cpu help to return a list of supported CPU models
on s390 and also to query for cpu definitions in the monitor.
Initially only cpu model = host is returned. This needs to be reworked
into a full-fledged CPU model handling later on.
This change is needed to allow libvirt exploiters (like OpenStack)
to specify a CPU model.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[agraf: fix s390x-linux-user, adjust header locations] Signed-off-by: Alexander Graf <agraf@suse.de>
Lets move the code to setup IPL for external kernel
or via the zipl rom into a separate file. This allows to
- define a reboot handler, setting up the PSW appropriately
- enhance the boot code to IPL disks that contain a bootmap that
was created with zipl under LPAR or z/VM (future patch)
- reuse that code for several machines (e.g. virtio-ccw and virtio-s390)
- allow different machines to provide different defaults
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
[agraf: symbolify initial psw, adjust header file location, fix for QOM] Signed-off-by: Alexander Graf <agraf@suse.de>
IBMs s390 contributions were meant to to be gplv2 or later (since
we were contributing to qemu). Several of the s390 specific files
link to gpl code anyway, so lets clarify the licence statement for
new contributions for those files that we have touched multiple
times or will likely touch again.
This patch does not touch files that mostly deal with tcg.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Thu, 17 Jan 2013 10:32:21 +0000 (11:32 +0100)]
openpic: export e500 epr enable into a ppc.c function
Enabling and disabling the EPR capability (mpic_proxy) is a system
wide operation. As such, it belongs into the ppc.c file, since that's
where PPC specific machine wide logic happens.
Alexander Graf [Wed, 16 Jan 2013 00:43:43 +0000 (01:43 +0100)]
PPC: Provide zero SVR for -cpu e500mc and e5500
Even though our -cpu types for e500mc and e5500 are no real CPUs that
actually have version registers, a guest might still want to access
said version register and that has to succeed for a guest to be happy.
So let's expose a zero SVR value on E500_SVR SPR reads.
We have 3 blobs we need to load when booting the system:
- kernel
- initrd
- dtb
We place them in physical memory in that order. At least we should.
This patch fixes the location calculation up to take any module into
account, fixing the dtb offset along the way.
Reported-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 7 Jan 2013 19:17:24 +0000 (20:17 +0100)]
openpic: set mixed mode as supported
The Raven MPIC implementation supports the "Mixed" mode to work with
an i8259. While we don't implement mixed mode, we should mark it as
a supported mode in the mode bitmap.
Stefan Hajnoczi [Thu, 17 Jan 2013 15:46:54 +0000 (16:46 +0100)]
dataplane: support viostor virtio-pci status bit setting
The viostor virtio-blk driver for Windows does not use the
VIRTIO_CONFIG_S_DRIVER bit. It only sets the VIRTIO_CONFIG_S_DRIVER_OK
bit.
The viostor driver refreshes the virtio-pci status byte sometimes while
the guest is running. We misinterpret 0x4 (VIRTIO_CONFIG_S_DRIVER_OK)
as an indication that virtio-blk-data-plane should be stopped since 0x2
(VIRTIO_CONFIG_S_DRIVER) is missing. The result is that the device
becomes unresponsive.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 15 Jan 2013 16:19:38 +0000 (17:19 +0100)]
dataplane: avoid reentrancy during virtio_blk_data_plane_stop()
When dataplane is stopping, the s->vdev->binding->set_host_notifier(...,
false) call can invoke the virtqueue handler if an ioeventfd
notification is pending. This causes hw/virtio-blk.c to invoke
virtio_blk_data_plane_start() before virtio_blk_data_plane_stop()
returns!
The result is that we try to restart dataplane while trying to stop it
and the following assertion is raised:
Although the code was intended to prevent this scenario, the s->started
boolean isn't enough. Add s->stopping so that we can postpone clearing
s->started until we've completely stopped dataplane.
This way, virtqueue handler calls during virtio_blk_data_plane_stop()
are ignored. When dataplane is legitimately started again later we
already self-kick ourselves to resume processing.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Anthony Liguori [Thu, 17 Jan 2013 19:09:57 +0000 (13:09 -0600)]
Merge remote-tracking branch 'luiz/queue/qmp' into staging
# By Wenchao Xia
# Via Luiz Capitulino
* luiz/queue/qmp:
HMP: add sub command table to info
HMP: move define of mon_cmds
HMP: add infrastructure for sub command
HMP: delete info handler
HMP: add QDict to info callback handler
Stefan Hajnoczi [Tue, 15 Jan 2013 07:47:26 +0000 (08:47 +0100)]
Makefile: drop recursive libcacard clean
Commit eb8eb53e5846a957cf333f2e1ec8cb6e0c04 ("libcacard: rewrite
Makefile in non-recursive style") refactored libcacard/Makefile so it
can be included by the top-level Makefile.
The top-level clean target still loops over subdirectories, including
libcacard/, to invoke recursive clean. Remove libcacard from the
recursive clean since its files are already included at the top level.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 14 Jan 2013 13:14:42 +0000 (14:14 +0100)]
migration: remove argument to qemu_savevm_state_cancel
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Juan Quintela [Wed, 3 Oct 2012 18:33:34 +0000 (20:33 +0200)]
migration: unfold rest of migrate_fd_put_ready() into thread
This will allow us finer control in next patches.
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Juan Quintela [Wed, 3 Oct 2012 18:23:43 +0000 (20:23 +0200)]
migration: move exit condition to migration thread
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Juan Quintela [Mon, 10 Dec 2012 21:29:14 +0000 (22:29 +0100)]
migration: Add buffered_flush error handling
Now that we have error handling we can do proper handling of
buffered_flush().
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Juan Quintela [Wed, 3 Oct 2012 18:16:24 +0000 (20:16 +0200)]
migration: move beginning stage to the migration thread
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Juan Quintela [Mon, 14 Jan 2013 12:36:28 +0000 (13:36 +0100)]
qemu-file: Only set last_error if it is not already set
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 20 Dec 2012 10:30:39 +0000 (11:30 +0100)]
migration: fix off-by-one in buffered_rate_limit
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com>
Paolo Bonzini [Sat, 10 Nov 2012 17:58:40 +0000 (18:58 +0100)]
migration: remove double call to migrate_fd_close
The call in buffered_close is enough, because buffered_close is called
already by migrate_fd_cleanup.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com>
Paolo Bonzini [Thu, 20 Dec 2012 10:29:03 +0000 (11:29 +0100)]
migration: make function static
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com>
Paolo Bonzini [Thu, 20 Dec 2012 10:26:04 +0000 (11:26 +0100)]
Protect migration_bitmap_sync() with the ramlist lock
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com>
Paolo Bonzini [Thu, 20 Dec 2012 10:25:45 +0000 (11:25 +0100)]
Unlock ramlist lock also in error case
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com>
Wenchao Xia [Mon, 14 Jan 2013 06:06:29 +0000 (14:06 +0800)]
HMP: add sub command table to info
Now info command takes a table of sub info commands,
and changed do_info() to do_info_help() to do help funtion
only.
Note that now "info <unknown-topic>" returns error instead
of list of info topics.
Wenchao Xia [Mon, 14 Jan 2013 06:06:27 +0000 (14:06 +0800)]
HMP: add infrastructure for sub command
This patch make parsing of hmp command aware of that it may
have sub command. Also discard simple encapsulation function
monitor_find_command(). For case "@command ", space after
@command is filtered out.
Wenchao Xia [Mon, 14 Jan 2013 06:06:25 +0000 (14:06 +0800)]
HMP: add QDict to info callback handler
This patch change all info call back function to take
additional QDict * parameter, which allow those command
take parameter. Now it is set to NULL at default case.
projects / qemu.git / log