* remotes/huth-gitlab/tags/pull-request-2019-08-20:
hw/core: Add a config switch for the generic loader device
hw/misc: Add a config switch for the "unimplemented" device
hw/core: Add a config switch for the "split-irq" device
hw/core: Add a config switch for the "or-irq" device
hw/core: Add a config switch for the "register" device
hw/dma: Do not build the xlnx_dpdma device for the MicroBlaze machines
hw/intc: Only build the xlnx-iomod-intc device for the MicroBlaze PMU
hw/Kconfig: Move the generic XLNX_ZYNQMP to the root hw/Kconfig
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 20 Aug 2019 12:40:48 +0000 (13:40 +0100)]
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-aug-20-2019' into staging
MIPS queue for August 20th, 2019
# gpg: Signature made Mon 19 Aug 2019 19:07:18 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-aug-20-2019:
target/mips: tests/tcg: Fix target configurations for MSA tests
target/mips: tests/tcg: Add optional printing of more detailed failure info
target/mips: Style improvements in mips_mipssim.c
target/mips: Style improvements in mips_malta.c
target/mips: Style improvements in mips_int.c
target/mips: Style improvements in mips_fulong2e.c
target/mips: Style improvements in cps.c
target/mips: Style improvements in translate.c
target/mips: Style improvements in machine.c
target/mips: Style improvements in cpu.c
target/mips: Style improvements in cp0_timer.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 20 Aug 2019 09:27:24 +0000 (10:27 +0100)]
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-08-19' into staging
Block patches:
- preallocation=falloc/full support for LUKS
- Various minor fixes
# gpg: Signature made Mon 19 Aug 2019 16:36:45 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2019-08-19:
doc: Preallocation does not require writing zeroes
iotests: Fix 141 when run with qed
vpc: Do not return RAW from block_status
vmdk: Make block_status recurse for flat extents
vdi: Make block_status recurse for fixed images
iotests: Full mirror to existing non-zero image
iotests: Test convert -n to pre-filled image
iotests: Convert to preallocated encrypted qcow2
vhdx: Fix .bdrv_has_zero_init()
vdi: Fix .bdrv_has_zero_init()
qcow2: Fix .bdrv_has_zero_init()
block: Use bdrv_has_zero_init_truncate()
block: Implement .bdrv_has_zero_init_truncate()
block: Add bdrv_has_zero_init_truncate()
mirror: Fix bdrv_has_zero_init() use
qemu-img: Fix bdrv_has_zero_init() use in convert
LUKS: support preallocation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thomas Huth [Tue, 30 Jul 2019 13:40:50 +0000 (15:40 +0200)]
hw/core: Add a config switch for the generic loader device
The generic loader device is completely optional. Let's add a proper
config switch for it so that people can disable it if they don't need
it and want to create a minimalistic QEMU binary.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190817101931.28386-9-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 14 May 2019 05:26:53 +0000 (07:26 +0200)]
hw/misc: Add a config switch for the "unimplemented" device
The device is only used by some few boards. Let's use a proper Kconfig
switch so that we only compile this code if we really need it.
Message-Id: <20190817101931.28386-8-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 14 May 2019 08:24:28 +0000 (10:24 +0200)]
hw/core: Add a config switch for the "split-irq" device
The "split-irq" device is currently only used by machines that use
CONFIG_ARMSSE. Let's add a proper CONFIG_SPLIT_IRQ switch for this
so that it only gets compiled when we really need it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190817101931.28386-7-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 14 May 2019 06:13:28 +0000 (08:13 +0200)]
hw/core: Add a config switch for the "or-irq" device
The "or-irq" device is only used by certain machines. Let's add
a proper config switch for it so that it only gets compiled when we
really need it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190817101931.28386-6-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 14 May 2019 05:59:34 +0000 (07:59 +0200)]
hw/core: Add a config switch for the "register" device
The "register" device is only used by certain machines. Let's add
a proper config switch for it so that it only gets compiled when we
really need it.
Message-Id: <20190817101931.28386-5-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
hw/dma: Do not build the xlnx_dpdma device for the MicroBlaze machines
The xlnx_dpdma device is only used by the ZynqMP AArch64 machine
(not the MicroBlaze PMU). Remove it from the ZynqMP generic objects.
(Note, this entry was duplicated for the AArch64).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190427141459.19728-4-philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
hw/intc: Only build the xlnx-iomod-intc device for the MicroBlaze PMU
The Xilinx I/O Module Interrupt Controller is only used by the
MicroBlaze PMU, not by the AArch64 machine.
Move it from the generic ZynqMP object list to the PMU specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190427141459.19728-3-philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
hw/Kconfig: Move the generic XLNX_ZYNQMP to the root hw/Kconfig
The XLNX_ZYNQMP config is used in multiple subdirectories
(timer, intc). Move it to the root hw/Kconfig.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190427141459.19728-2-philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
target/mips: tests/tcg: Fix target configurations for MSA tests
At this moment, the only MIPS CPUs that are emulated in QEMU and
support MSA extension are R5600 (mips32r5), and I6400/I6500 (mips64r6).
Therefore, mips32r5 and mips64r6 are the only ISAs that could support
MSA in QEMU. This means mips32r6 currently do not make much sense, and
mips32r5 support for MSA tests is needed, which is done by this patch.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-38-git-send-email-aleksandar.markovic@rt-rk.com>
target/mips: tests/tcg: Add optional printing of more detailed failure info
There is a need for printing input and output data for failure cases,
for debugging purpose. This is achieved by this patch, and only if a
preprocessor constant is manually set to 1. (Assumption is that the
need for such printout is relatively rare.)
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-37-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-17-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-16-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-15-git-send-email-aleksandar.markovic@rt-rk.com>
target/mips: Style improvements in mips_fulong2e.c
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-14-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-13-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-12-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1566216496-17375-10-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1566216496-17375-8-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1566216496-17375-7-git-send-email-aleksandar.markovic@rt-rk.com>
Max Reitz [Thu, 11 Jul 2019 13:29:35 +0000 (15:29 +0200)]
doc: Preallocation does not require writing zeroes
When preallocating an encrypted qcow2 image, it just lets the protocol
driver write data and then does not mark the clusters as zero.
Therefore, reading this image will yield effectively random data.
As such, we have not fulfilled the promise of always writing zeroes when
preallocating an image in a while. It seems that nobody has really
cared, so change the documentation to conform to qemu's actual behavior.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190711132935.13070-1-mreitz@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Fri, 9 Aug 2019 18:52:53 +0000 (20:52 +0200)]
iotests: Fix 141 when run with qed
69f47505ee has changed qcow2 in such a way that the commit job run in
test 141 (and 144[1]) returns before it emits the READY event. However,
141 also runs with qed, where the order is still the other way around.
Just filter out the {"return": {}} so the test passes for qed again.
[1] 144 only runs with qcow2, so it is fine as it is.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Fixes: 69f47505ee66afaa513305de0c1895a224e52c45 Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190809185253.17535-1-mreitz@redhat.com Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Thu, 25 Jul 2019 15:55:12 +0000 (17:55 +0200)]
vpc: Do not return RAW from block_status
vpc is not really a passthrough driver, even when using the fixed
subformat (where host and guest offsets are equal). It should handle
preallocation like all other drivers do, namely by returning
DATA | RECURSE instead of RAW.
There is no tangible difference but the fact that bdrv_is_allocated() no
longer falls through to the protocol layer.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190725155512.9827-4-mreitz@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Thu, 25 Jul 2019 15:55:11 +0000 (17:55 +0200)]
vmdk: Make block_status recurse for flat extents
Fixes: 69f47505ee66afaa513305de0c1895a224e52c45 Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190725155512.9827-3-mreitz@redhat.com Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Thu, 25 Jul 2019 15:55:10 +0000 (17:55 +0200)]
vdi: Make block_status recurse for fixed images
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Fixes: 69f47505ee66afaa513305de0c1895a224e52c45 Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190725155512.9827-2-mreitz@redhat.com Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 24 Jul 2019 17:12:39 +0000 (19:12 +0200)]
iotests: Full mirror to existing non-zero image
The result of a sync=full mirror should always be the equal to the
input. Therefore, existing images should be treated as potentially
non-zero and thus should be explicitly initialized to be zero
beforehand.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-12-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 24 Jul 2019 17:12:37 +0000 (19:12 +0200)]
iotests: Convert to preallocated encrypted qcow2
Add a test case for converting an empty image (which only returns zeroes
when read) to a preallocated encrypted qcow2 image.
qcow2_has_zero_init() should return 0 then, thus forcing qemu-img
convert to create zero clusters.
Max Reitz [Wed, 24 Jul 2019 17:12:35 +0000 (19:12 +0200)]
vdi: Fix .bdrv_has_zero_init()
Static VDI images cannot guarantee to be zero-initialized. If the image
has been statically allocated, forward the call to the underlying
storage node.
Reported-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20190724171239.8764-8-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 24 Jul 2019 17:12:34 +0000 (19:12 +0200)]
qcow2: Fix .bdrv_has_zero_init()
If a qcow2 file is preallocated, it can no longer guarantee that it
initially appears as filled with zeroes.
So implement .bdrv_has_zero_init() by checking whether the file is
preallocated; if so, forward the call to the underlying storage node,
except for when it is encrypted: Encrypted preallocated images always
return effectively random data, so .bdrv_has_zero_init() must always
return 0 for them.
.bdrv_has_zero_init_truncate() can remain bdrv_has_zero_init_1(),
because it presupposes PREALLOC_MODE_OFF.
Reported-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-7-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 24 Jul 2019 17:12:33 +0000 (19:12 +0200)]
block: Use bdrv_has_zero_init_truncate()
vhdx and parallels call bdrv_has_zero_init() when they do not really
care about an image's post-create state but only about what happens when
you grow an image. That is a bit ugly, and also overly safe when
growing preallocated images without preallocating the new areas.
Let them use bdrv_has_zero_init_truncate() instead.
Max Reitz [Wed, 24 Jul 2019 17:12:31 +0000 (19:12 +0200)]
block: Add bdrv_has_zero_init_truncate()
No .bdrv_has_zero_init() implementation returns 1 if growing the file
would add non-zero areas (at least with PREALLOC_MODE_OFF), so using it
in lieu of this new function was always safe.
But on the other hand, it is possible that growing an image that is not
zero-initialized would still add a zero-initialized area, like when
using nonpreallocating truncation on a preallocated image. For callers
that care only about truncation, not about creation with potential
preallocation, this new function is useful.
Alternatively, we could have added a PreallocMode parameter to
bdrv_has_zero_init(). But the only user would have been qemu-img
convert, which does not have a plain PreallocMode value right now -- it
would have to parse the creation option to obtain it. Therefore, the
simpler solution is to let bdrv_has_zero_init() inquire the
preallocation status and add the new bdrv_has_zero_init_truncate() that
presupposes PREALLOC_MODE_OFF.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-4-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 24 Jul 2019 17:12:30 +0000 (19:12 +0200)]
mirror: Fix bdrv_has_zero_init() use
bdrv_has_zero_init() only has meaning for newly created images or image
areas. If the mirror job itself did not create the image, it cannot
rely on bdrv_has_zero_init()'s result to carry any meaning.
This is the case for drive-mirror with mode=existing and always for
blockdev-mirror.
Note that we only have to zero-initialize the target with sync=full,
because other modes actually do not promise that the target will contain
the same data as the source after the job -- sync=top only promises to
copy anything allocated in the top layer, and sync=none will only copy
new I/O. (Which is how mirror has always handled it.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-3-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 24 Jul 2019 17:12:29 +0000 (19:12 +0200)]
qemu-img: Fix bdrv_has_zero_init() use in convert
bdrv_has_zero_init() only has meaning for newly created images or image
areas. If qemu-img convert did not create the image itself, it cannot
rely on bdrv_has_zero_init()'s result to carry any meaning.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-2-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can tell that a decodetree input file is "secondary" when it
uses an argument set marked "!extern". This indicates that at
least one of the insn translation functions will have already
been declared by the "primary" input file, but given only the
secondary we cannot tell which.
Avoid redundant declaration warnings by suppressing them with pragmas.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Mon, 19 Aug 2019 14:58:01 +0000 (15:58 +0100)]
Merge remote-tracking branch 'remotes/stsquad/tags/pull-softfloat-headers-190819-1' into staging
Softfloat updates
- minor refactoring of constants
- drop LIT64 macro
- re-organise header inclusion
# gpg: Signature made Mon 19 Aug 2019 12:08:37 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-softfloat-headers-190819-1:
targets (various): use softfloat-helpers.h where we can
target/riscv: rationalise softfloat includes
target/mips: rationalise softfloat includes
fpu: rename softfloat-specialize.h -> .inc.c
fpu: make softfloat-macros "self-contained"
fpu: move inline helpers into a separate header
fpu: remove the LIT64 macro
target/m68k: replace LIT64 with UINT64_C macros
fpu: replace LIT64 with UINT64_C macros
fpu: use min/max values from stdint.h for integral overflow
fpu: convert float[16/32/64]_squash_denormal to new modern style
fpu: replace LIT64 usage with UINT64_C for specialize constants
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/huth-gitlab/tags/pull-request-2019-08-17:
gitlab-ci: Remove qcow2 tests that are handled by "make check" already
tests: Run the iotests during "make check" again
block: fix NetBSD qemu-iotests failure
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 19 Aug 2019 11:32:15 +0000 (12:32 +0100)]
Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging
Pull request
Stable notes: patches one and two can be considered
for the next -stable release.
# gpg: Signature made Sat 17 Aug 2019 00:15:50 BST
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jnsnow/tags/ide-pull-request:
hw/ide/atapi: Use the ldst API
Revert "ide/ahci: Check for -ECANCELED in aio callbacks"
dma-helpers: ensure AIO callback is invoked after cancellation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Thu, 8 Aug 2019 16:30:35 +0000 (17:30 +0100)]
targets (various): use softfloat-helpers.h where we can
Generally the cpu and non-FP helper files just want to manipulate the
softfloat flags. For this they can just use the -helpers.h include
which brings in a minimal number of inline helpers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Thu, 8 Aug 2019 16:29:41 +0000 (17:29 +0100)]
target/riscv: rationalise softfloat includes
We should avoid including the whole of softfloat headers in cpu.h and
explicitly include it only where we will be calling softfloat
functions. We can use the -types.h and -helpers.h in cpu.h for the few
bits that are global.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Palmer Dabbelt <palmer@sifive.com>
Alex Bennée [Thu, 8 Aug 2019 16:27:31 +0000 (17:27 +0100)]
target/mips: rationalise softfloat includes
We should avoid including the whole of softfloat headers in cpu.h and
explicitly include it only where we will be calling softfloat
functions. We can use the -types.h in cpu.h for the few bits that are
global. We also move the restore_snan_bit_mode into internal.h and
include -helpers.h there.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Alex Bennée [Thu, 8 Aug 2019 16:18:21 +0000 (17:18 +0100)]
fpu: rename softfloat-specialize.h -> .inc.c
This is not a normal header and should only be included in the main
softfloat.c file to bring in the various target specific
specialisations. Indeed as it contains non-inlined C functions it is
not even a legal header. Rename it to match our included C convention.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Thu, 8 Aug 2019 16:05:15 +0000 (17:05 +0100)]
fpu: make softfloat-macros "self-contained"
The macros use the "flags" type and to be consistent if anyone just
needs the macros we should bring in the header we need. There is an
outstanding TODO to audit the use of "flags" and replace with bool at
which point this include could be dropped.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Thu, 8 Aug 2019 14:11:08 +0000 (15:11 +0100)]
fpu: move inline helpers into a separate header
There are a bunch of users of the inline helpers who do not need
access to the entire softfloat API. Move those inline helpers into a
new header file which can be included without bringing in the rest of
the world.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Tue, 13 Aug 2019 11:16:23 +0000 (12:16 +0100)]
fpu: replace LIT64 with UINT64_C macros
In our quest to eliminate the home rolled LIT64 macro we fixup usage
inside the softfloat code. While we are at it we remove some of the
extraneous spaces to closer fit the house style.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Tue, 13 Aug 2019 10:55:32 +0000 (11:55 +0100)]
fpu: use min/max values from stdint.h for integral overflow
Remove some more use of LIT64 while making the meaning more clear. We
also avoid the need of casts as the results by definition fit into the
return type.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Mon, 12 Aug 2019 16:19:33 +0000 (17:19 +0100)]
fpu: convert float[16/32/64]_squash_denormal to new modern style
This also allows us to remove the extractFloat16exp/frac helpers. We
avoid using the floatXX_pack_raw functions as they are slight overkill
for masking out all but the top bit of the number. The generated code
is almost exactly the same as makes no difference to the
pre-conversion code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Peter Maydell [Mon, 19 Aug 2019 09:55:03 +0000 (10:55 +0100)]
Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into staging
Pull request
Rebase notes:
011/36:[0003] [FC] 'block/backup: upgrade copy_bitmap to BdrvDirtyBitmap'
016/36:[----] [-C] 'iotests: Add virtio-scsi device helper'
017/36:[0002] [FC] 'iotests: add test 257 for bitmap-mode backups'
030/36:[0011] [FC] 'block/backup: teach TOP to never copy unallocated regions'
032/36:[0018] [FC] 'iotests/257: test traditional sync modes'
11: A new hbitmap call was added late in 4.1, changed to
bdrv_dirty_bitmap_next_zero.
16: Context-only (self.has_quit is new context in 040)
17: Removed 'auto' to follow upstream trends in iotest fashion
30: Handled explicitly on-list with R-B from Max.
32: Fix capitalization in test, as mentioned on-list.
# gpg: Signature made Sat 17 Aug 2019 00:12:13 BST
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jnsnow/tags/bitmaps-pull-request: (36 commits)
tests/test-hbitmap: test next_zero and _next_dirty_area after truncate
block/backup: refactor write_flags
block/backup: deal with zero detection
qapi: add dirty-bitmaps to query-named-block-nodes result
iotests/257: test traditional sync modes
block/backup: support bitmap sync modes for non-bitmap backups
block/backup: teach TOP to never copy unallocated regions
block/backup: add backup_is_cluster_allocated
block/backup: centralize copy_bitmap initialization
block/backup: improve sync=bitmap work estimates
iotests/257: test API failures
block/backup: hoist bitmap check into QMP interface
iotests/257: Refactor backup helpers
iotests/257: add EmulatedBitmap class
iotests/257: add Pattern class
iotests: test bitmap moving inside 254
qapi: implement block-dirty-bitmap-remove transaction action
blockdev: reduce aio_context locked sections in bitmap add/remove
block/backup: loosen restriction on readonly bitmaps
iotests: add test 257 for bitmap-mode backups
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thomas Huth [Tue, 16 Jul 2019 09:30:35 +0000 (11:30 +0200)]
gitlab-ci: Remove qcow2 tests that are handled by "make check" already
Since most iotests are now run during "make check" already, we do not
need to test them explicitly from the gitlab-ci.yml script anymore.
And while we're at it, add some of the new non-auto tests >= 246 instead.
Message-Id: <20190717111947.30356-5-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Fri, 12 Jul 2019 15:39:33 +0000 (17:39 +0200)]
tests: Run the iotests during "make check" again
People often forget to run the iotests before submitting patches or pull
requests - this is likely due to the fact that we do not run the tests
during our mandatory "make check" tests yet. Now that we've got a proper
"auto" group of iotests that should be fine to run in every environment,
we can enable the iotests during "make check" again by running the "auto"
tests by default from the check-block.sh script.
Some cases still need to be checked first, though: iotests need bash and
GNU sed (otherwise they fail), and if gprof is enabled, it spoils the
output of some test cases causing them to fail. So if we detect that one
of the required programs is missing or that gprof is enabled, we still
have to skip the iotests to avoid failures.
And finally, since we are using check-block.sh now again, this patch also
removes the qemu-iotests-quick.sh script since we do not need that anymore
(and having two shell wrapper scripts around the block tests seems rather
confusing than helpful).
Message-Id: <20190717111947.30356-4-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
[AJB: -makecheck to check-block.sh, move check-block to start and gate it] Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Paolo Bonzini [Thu, 25 Jul 2019 09:59:20 +0000 (11:59 +0200)]
block: fix NetBSD qemu-iotests failure
Opening a block device on NetBSD has an additional step compared to other OSes,
corresponding to raw_normalize_devicepath. The error message in that function
is slightly different from that in raw_open_common and this was causing spurious
failures in qemu-iotests. However, in general it is not important to know what
exact step was failing, for example in the qemu-iotests case the error message
contains the fairly unequivocal "No such file or directory" text from strerror.
We can thus fix the failures by standardizing on a single error message for
both raw_open_common and raw_normalize_devicepath; in fact, we can even
use error_setg_file_open to make sure the error message is the same as in
the rest of QEMU.
Message-Id: <20190725095920.28419-1-pbonzini@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
The big-endian load/store functions are already provided
by "qemu/bswap.h".
Avoid code duplication, use the generic API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190808130454.9930-1-philmd@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
It's not correct to just ignore an error code in a callback; we need to
handle that error and possible report failure to the guest so that they
don't wait indefinitely for an operation that will now never finish.
This ought to help cases reported by Nutanix where iSCSI returns a
legitimate -ECANCELED for certain operations which should be propagated
normally.
Reported-by: Shaju Abraham <shaju.abraham@nutanix.com> Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190729223605.7163-1-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
Paolo Bonzini [Mon, 29 Jul 2019 21:34:16 +0000 (23:34 +0200)]
dma-helpers: ensure AIO callback is invoked after cancellation
dma_aio_cancel unschedules the BH if there is one, which corresponds
to the reschedule_dma case of dma_blk_cb. This can stall the DMA
permanently, because dma_complete will never get invoked and therefore
nobody will ever invoke the original AIO callback in dbs->common.cb.
Fix this by invoking the callback (which is ensured to happen after
a bdrv_aio_cancel_async, or done manually in the dbs->bh case), and
add assertions to check that the DMA state machine is indeed waiting
for dma_complete or reschedule_dma, but never both.
Reported-by: John Snow <jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20190729213416.1972-1-pbonzini@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
tests/test-hbitmap: test next_zero and _next_dirty_area after truncate
Test that hbitmap_next_zero and hbitmap_next_dirty_area can find things
after old bitmap end.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190805164652.42409-1-vsementsov@virtuozzo.com Tested-by: John Snow <jsnow@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
write flags are constant, let's store it in BackupBlockJob instead of
recalculating. It also makes two boolean fields to be unused, so,
drop them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190730163251.755248-4-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
We have detect_zeroes option, so at least for blockdev-backup user
should define it if zero-detection is needed. For drive-backup leave
detection enabled by default but do it through existing option instead
of open-coding.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190730163251.755248-2-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:55 +0000 (16:35 -0400)]
block/backup: support bitmap sync modes for non-bitmap backups
Accept bitmaps and sync policies for the other backup modes.
This allows us to do things like create a bitmap synced to a full backup
without a transaction, or start a resumable backup process.
Some combinations don't make sense, though:
- NEVER policy combined with any non-BITMAP mode doesn't do anything,
because the bitmap isn't used for input or output.
It's harmless, but is almost certainly never what the user wanted.
- sync=NONE is more questionable. It can't use on-success because this
job never completes with success anyway, and the resulting artifact
of 'always' is suspect: because we start with a full bitmap and only
copy out segments that get written to, the final output bitmap will
always be ... a fully set bitmap.
Maybe there's contexts in which bitmaps make sense for sync=none,
but not without more severe changes to the current job, and omitting
it here doesn't prevent us from adding it later.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-11-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:55 +0000 (16:35 -0400)]
block/backup: teach TOP to never copy unallocated regions
Presently, If sync=TOP is selected, we mark the entire bitmap as dirty.
In the write notifier handler, we dutifully copy out such regions.
Fix this in three parts:
1. Mark the bitmap as being initialized before the first yield.
2. After the first yield but before the backup loop, interrogate the
allocation status asynchronously and initialize the bitmap.
3. Teach the write notifier to interrogate allocation status if it is
invoked during bitmap initialization.
As an effect of this patch, the job progress for TOP backups
now behaves like this:
- total progress starts at bdrv_length.
- As allocation status is interrogated, total progress decreases.
- As blocks are copied, current progress increases.
Taken together, the floor and ceiling move to meet each other.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190716000117.25219-10-jsnow@redhat.com
[Remove ret = -ECANCELED change. --js]
[Squash in conflict resolution based on Max's patch --js]
Message-id: c8b0ab36-79c8-0b4b-3193-4e12ed8c848b@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:55 +0000 (16:35 -0400)]
block/backup: add backup_is_cluster_allocated
Modify bdrv_is_unallocated_range to utilize the pnum return from
bdrv_is_allocated, and in the process change the semantics from
"is unallocated" to "is allocated."
Optionally returns a full number of clusters that share the same
allocation status.
This will be used to carefully toggle bits in the bitmap for sync=top
initialization in the following commits.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-9-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
Just a few housekeeping changes that keeps the following commit easier
to read; perform the initial copy_bitmap initialization in one place.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-8-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:55 +0000 (16:35 -0400)]
block/backup: improve sync=bitmap work estimates
When making backups based on bitmaps, the work estimate can be more
accurate. Update iotests to reflect the new strategy.
TOP work estimates are broken, but do not get worse with this commit.
That issue is addressed in the following commits instead.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-7-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:55 +0000 (16:35 -0400)]
iotests/257: test API failures
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-6-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:55 +0000 (16:35 -0400)]
block/backup: hoist bitmap check into QMP interface
This is nicer to do in the unified QMP interface that we have now,
because it lets us use the right terminology back at the user.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:55 +0000 (16:35 -0400)]
iotests/257: Refactor backup helpers
This test needs support for non-bitmap backups and missing or
unspecified bitmap sync modes, so rewrite the helpers to be a little
more generic.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-4-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:54 +0000 (16:35 -0400)]
iotests/257: add EmulatedBitmap class
Represent a bitmap with an object that we can mark and clear bits in.
This makes it easier to manage partial writes when we don't write a
full group's worth of patterns before an error.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:54 +0000 (16:35 -0400)]
iotests/257: add Pattern class
Just kidding, this is easier to manage with a full class instead of a
namedtuple.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
Test persistent bitmap copying with and without removal of original
bitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-4-jsnow@redhat.com
[Edited comment "bitmap1" --> "bitmap2" as per review. --js] Signed-off-by: John Snow <jsnow@redhat.com>
It is used to do transactional movement of the bitmap (which is
possible in conjunction with merge command). Transactional bitmap
movement is needed in scenarios with external snapshot, when we don't
want to leave copy of the bitmap in the base image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-3-jsnow@redhat.com
[Edited "since" version to 4.2 --js] Signed-off-by: John Snow <jsnow@redhat.com>
blockdev: reduce aio_context locked sections in bitmap add/remove
Commit 0a6c86d024c52 returned these locks back to add/remove
functionality, to protect from intersection of persistent bitmap
related IO with other IO. But other bitmap-related functions called
here are unrelated to the problem, and there are no needs to keep these
calls inside critical sections.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:54 +0000 (16:35 -0400)]
block/backup: loosen restriction on readonly bitmaps
With the "never" sync policy, we actually can utilize readonly bitmaps
now. Loosen the check at the QMP level, and tighten it based on
provided arguments down at the job creation level instead.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-19-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:54 +0000 (16:35 -0400)]
iotests: add test 257 for bitmap-mode backups
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-18-jsnow@redhat.com
[Removed 'auto' group, as per new testing config guidelines --js] Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:54 +0000 (16:35 -0400)]
iotests: Add virtio-scsi device helper
Seems that it comes up enough.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-17-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:54 +0000 (16:35 -0400)]
iotests: teach FilePath to produce multiple paths
Use "FilePaths" instead of "FilePath" to request multiple files be
cleaned up after we leave that object's scope.
This is not crucial; but it saves a little typing.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-16-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:53 +0000 (16:35 -0400)]
iotests: teach run_job to cancel pending jobs
run_job can cancel pending jobs to simulate failure. This lets us use
the pending callback to issue test commands while the job is open, but
then still have the job fail in the end.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-15-jsnow@redhat.com
[Maintainer edit: Merge conflict resolution in run_job] Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:53 +0000 (16:35 -0400)]
iotests: add testing shim for script-style python tests
Because the new-style python tests don't use the iotests.main() test
launcher, we don't turn on the debugger logging for these scripts
when invoked via ./check -d.
Refactor the launcher shim into new and old style shims so that they
share environmental configuration.
Two cleanup notes: debug was not actually used as a global, and there
was no reason to create a class in an inner scope just to achieve
default variables; we can simply create an instance of the runner with
the values we want instead.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-14-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:53 +0000 (16:35 -0400)]
block/backup: add 'always' bitmap sync policy
This adds an "always" policy for bitmap synchronization. Regardless of if
the job succeeds or fails, the bitmap is *always* synchronized. This means
that for backups that fail part-way through, the bitmap retains a record of
which sectors need to be copied out to accomplish a new backup using the
old, partial result.
In effect, this allows us to "resume" a failed backup; however the new backup
will be from the new point in time, so it isn't a "resume" as much as it is
an "incremental retry." This can be useful in the case of extremely large
backups that fail considerably through the operation and we'd like to not waste
the work that was already performed.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-13-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:53 +0000 (16:35 -0400)]
block/backup: upgrade copy_bitmap to BdrvDirtyBitmap
This simplifies some interface matters; namely the initialization and
(later) merging the manifest back into the sync_bitmap if it was
provided.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-12-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:53 +0000 (16:35 -0400)]
block/dirty-bitmap: add bdrv_dirty_bitmap_get
Add a public interface for get. While we're at it,
rename "bdrv_get_dirty_bitmap_locked" to "bdrv_dirty_bitmap_get_locked".
(There are more functions to rename to the bdrv_dirty_bitmap_VERB form,
but they will wait until the conclusion of this series.)
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-11-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
I'm surprised it didn't come up sooner, but sometimes we have a +busy
bitmap as a source. This is dangerous from the QMP API, but if we are
the owner that marked the bitmap busy, it's safe to merge it using it as
a read only source.
It is not safe in the general case to allow users to read from in-use
bitmaps, so create an internal variant that foregoes the safety
checking.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-10-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:53 +0000 (16:35 -0400)]
hbitmap: enable merging across granularities
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-9-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:53 +0000 (16:35 -0400)]
hbitmap: Fix merge when b is empty, and result is not an alias of a
Nobody calls the function like this currently, but we neither prohibit
or cope with this behavior. I decided to make the function cope with it.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-8-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:53 +0000 (16:35 -0400)]
block/backup: add 'never' policy to bitmap sync mode
This adds a "never" policy for bitmap synchronization. Regardless of if
the job succeeds or fails, we never update the bitmap. This can be used
to perform differential backups, or simply to avoid the job modifying a
bitmap.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-7-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:52 +0000 (16:35 -0400)]
block/backup: Add mirror sync mode 'bitmap'
We don't need or want a new sync mode for simple differences in
semantics. Create a new mode simply named "BITMAP" that is designed to
make use of the new Bitmap Sync Mode field.
Because the only bitmap sync mode is 'on-success', this adds no new
functionality to the backup job (yet). The old incremental backup mode
is maintained as a syntactic sugar for sync=bitmap, mode=on-success.
Add all of the plumbing necessary to support this new instruction.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-6-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:52 +0000 (16:35 -0400)]
qapi: add BitmapSyncMode enum
Depending on what a user is trying to accomplish, there might be a few
bitmap cleanup actions that occur when an operation is finished that
could be useful.
I am proposing three:
- NEVER: The bitmap is never synchronized against what was copied.
- ALWAYS: The bitmap is always synchronized, even on failures.
- ON-SUCCESS: The bitmap is synchronized only on success.
The existing incremental backup modes use 'on-success' semantics,
so add just that one for right now.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190709232550.10724-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:52 +0000 (16:35 -0400)]
blockdev-backup: utilize do_backup_common
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-4-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:52 +0000 (16:35 -0400)]
drive-backup: create do_backup_common
Create a common core that comprises the actual meat of what the backup API
boundary needs to do, and then switch drive-backup to use it.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
projects / mirror_qemu.git / log