proski [Mon, 26 Jan 2009 04:22:44 +0000 (04:22 +0000)]
2009-01-26 Daniel Mierswa <impulze@impulze.org>
* kern/misc.c (grub_strcasecmp): New function.
(grub_strcasecmp): Use grub_size_t instead of int for length.
Fix return value.
* include/grub/misc.h: Update function prototypes.
chrfranke [Thu, 22 Jan 2009 20:27:52 +0000 (20:27 +0000)]
2009-01-22 Christian Franke <franke@computer.org>
* kern/misc.c (grub_vsprintf): Fix size and termination of `format2'
(precision) digit string. Allow `.format2' without `format1' (width).
Limit input chars for `%s' output to `format2' if specified. This is
compatible with standard printf ().
chrfranke [Thu, 22 Jan 2009 20:15:05 +0000 (20:15 +0000)]
2009-01-22 Christian Franke <franke@computer.org>
* disk/ata.c (grub_ata_wait_status): Replace by ...
(grub_ata_wait_not_busy): ... this function. Checks only BSY bit,
other status bits may be invalid while BSY is asserted.
(grub_ata_check_ready): New function.
(grub_ata_cmd): Removed.
(grub_ata_wait_drq): New function.
(grub_ata_strncpy): Remove inline.
(grub_ata_pio_read): Reduce to actual block transfer. BSY wait
and error check now done by grub_ata_wait_drq ().
(grub_ata_pio_write): Likewise.
(grub_atapi_identify): Set DEV before check for !BSY. Use
grub_ata_wait_drq () to wait for data.
(grub_ata_device_initialize): Add status register check to
detect missing SATA slave devices. Add debug messages.
(grub_atapi_wait_drq): Use grub_ata_wait_not_busy ().
(grub_atapi_packet): Set DEV before check for !BSY. Replace
transfer loop by grub_ata_pio_write ().
(grub_ata_identify): Set DEV before check for !BSY. Use
grub_ata_wait_drq () to wait for data.
(grub_ata_setaddress): Set DEV before check for !BSY.
(grub_ata_readwrite): Remove duplicate code, handle batch/rest and
read/write in one loop. Fix invalid command on write. Fix incomplete
command on (size % batch) == 0. Add missing error check after write of
last block. Add debug messages.
(grub_atapi_read): Replace transfer loop by grub_ata_pio_read ().
chrfranke [Mon, 19 Jan 2009 20:39:57 +0000 (20:39 +0000)]
2009-01-19 Christian Franke <franke@computer.org>
* disk/ata.c (GRUB_ATAPI_REG_*): New defines.
(GRUB_ATAPI_IREASON_*): Likewise.
(grub_ata_pio_write): Fix timeout error return.
(grub_atapi_identify): Add grub_ata_wait () after cmd.
(grub_atapi_wait_drq): New function.
(grub_atapi_packet): New parameter `size'.
Use grub_atapi_wait_drq () and direct write instead of
grub_ata_pio_write ().
(grub_atapi_read): Replace grub_ata_pio_read () by a loop which
reads the number of bytes requested by the device for each DRQ
assertion.
(grub_atapi_write): Remove old implementation, return not
implemented instead.
chrfranke [Mon, 19 Jan 2009 20:27:54 +0000 (20:27 +0000)]
2009-01-19 Christian Franke <franke@computer.org>
* disk/scsi.c (grub_scsi_read10): Use scsi->blocksize instead
of 512 to calculate data size.
(grub_scsi_read12): Likewise.
(grub_scsi_write10): Likewise.
(grub_scsi_write12): Likewise.
(grub_scsi_read): Adjust size according to blocksize.
Add checks for invalid blocksize and unaligned transfer.
chrfranke [Fri, 16 Jan 2009 19:29:41 +0000 (19:29 +0000)]
2009-01-16 Christian Franke <franke@computer.org>
* disk/ata.c (enum grub_ata_commands): Remove EXEC_DEV_DIAGNOSTICS.
(enum grub_ata_timeout_milliseconds): New enum.
(grub_ata_wait_status): Add parameter milliseconds.
(grub_ata_cmd): Remove variable `err'. Remove wait for !DRQ to allow
recovery from timed-out commands.
(grub_ata_pio_read): Add parameter milliseconds. Fix error return,
return grub_errno instead of REG_ERROR.
(grub_ata_pio_write): Add parameter milliseconds.
(grub_atapi_identify): Fix size of ATAPI IDENTIFY sector.
Pass milliseconds to grub_ata_wait_status () and
grub_ata_pio_read ().
(grub_atapi_packet): Pass milliseconds to grub_ata_pio_write ().
(grub_ata_identify): Remove variable `ataerr'. Pass milliseconds to
grub_ata_wait_status (). Fix IDENTIFY timeout check.
(grub_ata_device_initialize): Remove EXECUTE DEVICE DIAGNOSTICS.
It is not suitable for device detection, because DEV bit is ignored,
the command may run too long, and not all devices set the signature
properly.
(grub_ata_pciinit): Clear grub_errno before grub_ata_device_initialize ().
(grub_ata_setaddress): Pass milliseconds to grub_ata_wait_status ().
Fix device selection, DEV bit must be set first to address the registers
of the correct device.
(grub_ata_readwrite): Pass milliseconds to grub_ata_wait_status () and
grub_ata_pio_read/write ().
(grub_atapi_read): Pass milliseconds to grub_ata_pio_read ().
(grub_atapi_write): Pass milliseconds to grub_ata_pio_write ().
bean [Tue, 13 Jan 2009 16:34:26 +0000 (16:34 +0000)]
2009-01-13 Bean <bean123ch@gmail.com>
* Makefile.in: (enable_grub_mkfont): New variable.
(freetype_cflags): Likewise.
(freetype_libs): Likewise.
* common.rmk (bin_UTILITIES): Add `grub-mkfont' if requested.
(grub_mkfont_SOURCES): New variable.
(grub_mkfont_CFLAGS): Likewise.
(grub_mkfont_LDFLAGS): Likewise.
* configure.ac (--enable-grub-mkfont): New option. Check for freetype2
library if `--enable-grub-mkfont' is requested.
(enable_grub_mkfont): New variable.
(freetype_cflags): Likewise.
(freetype_libs): Likewise.
robertmh [Fri, 28 Nov 2008 20:06:55 +0000 (20:06 +0000)]
Provide grub-install on coreboot.
* conf/i386-coreboot.rmk (sbin_SCRIPTS): Add `grub-install'.
(grub_install_SOURCES): New variable.
* util/i386/pc/grub-install.in: Add a few condition checks to make it
usable on coreboot.
robertmh [Fri, 28 Nov 2008 19:56:19 +0000 (19:56 +0000)]
2008-11-28 Robert Millan <rmh@aybabtu.com>
Fix build on powerpc-ieee1275. Based on patch created by
Manoel Abranches <mrabran@linux.vnet.ibm.com>.
* conf/powerpc-ieee1275.rmk (kernel_elf_SOURCES): Add
`kern/ieee1275/mmap.c'.
* include/grub/powerpc/ieee1275/memory.h: New file.
fzielcke [Tue, 25 Nov 2008 16:40:17 +0000 (16:40 +0000)]
2008-11-25 Felix Zielcke <fzielcke@z-51.de>
* util/grub-fstest.c (grub_term_get_current_input): Change return type
to `grub_term_input_t'.
(grub_term_get_current_output): Change return type to
`grub_term_output_t'.
robertmh [Sat, 22 Nov 2008 20:13:22 +0000 (20:13 +0000)]
* conf/powerpc-ieee1275.rmk (kernel_elf_LDFLAGS): Change link address
to 0x200000 (avoids trouble with some OFW implementations, and matches
with the one in Yaboot).
Reported by Manoel Abranches
robertmh [Sat, 22 Nov 2008 14:56:52 +0000 (14:56 +0000)]
2008-11-22 Robert Millan <rmh@aybabtu.com>
Fix breakage on coreboot due to declaration missmatch.
* term/i386/pc/vga_text.c (grub_vga_text_init_fini): New function.
(grub_vga_text_term): Use grub_vga_text_init_fini() instead of
grub_vga_text_cls().
robertmh [Thu, 20 Nov 2008 20:30:24 +0000 (20:30 +0000)]
Harmonize ieee1275's grub_available_iterate() with the generic
grub_machine_mmap_iterate() interface (fixes a recently-introduced
build problem on i386-ieee1275):
* kern/ieee1275/openfw.c (grub_available_iterate): Moved from here ...
* kern/ieee1275/mmap.c (grub_machine_mmap_iterate): ... here. Add third
parameter `type'. Update all users of this function.
* conf/i386-ieee1275.rmk (kernel_elf_SOURCES): Add
`kern/ieee1275/mmap.c'.
* kern/ieee1275/init.c
* include/grub/ieee1275/ieee1275.h (grub_available_iterate): Replace
with ...
(grub_machine_mmap_iterate): ... this.
* include/grub/i386/pc/memory.h (grub_machine_mmap_iterate): Change
return type to `grub_err_t'. Update all implementations of this
function prototype.
* include/grub/i386/coreboot/memory.h (grub_machine_mmap_iterate):
Likewise.
robertmh [Wed, 19 Nov 2008 12:11:44 +0000 (12:11 +0000)]
* loader/i386/linux.c (grub_rescue_cmd_initrd): Implement a few needed
constraints to initrd allocation (based on code from
loader/i386/pc/linux.c). Without them, initrd was allocated too high
for Linux to find it.
robertmh [Fri, 14 Nov 2008 19:04:26 +0000 (19:04 +0000)]
2008-11-14 Robert Millan <rmh@aybabtu.com>
* include/grub/i386/coreboot/memory.h (GRUB_MEMORY_MACHINE_LOWER_SIZE):
Redefine to match with GRUB_MEMORY_MACHINE_UPPER_START (0x100000). We
don't want to mess with lower memory, because it is used in the Linux
loader.
* loader/i386/linux.c (allocate_pages): Allocate `real_mode_mem' in
an appropiate place in lower memory, between 0x10000 and 0x90000,
like loader/i386/efi/linux.c does. Linux often panics if real_mode_mem
is in our heap (probably as a result of it being corrupted during
decompression).
robertmh [Wed, 12 Nov 2008 20:53:48 +0000 (20:53 +0000)]
2008-11-12 Robert Millan <rmh@aybabtu.com>
Make loader/i386/linux.c buildable on i386-pc (although disabled).
* include/grub/i386/pc/init.h: Include `<grub/machine/memory.h>'.
(struct grub_machine_mmap_entry, grub_machine_mmap_iterate): Move
from here ...
* include/grub/i386/pc/memory.h: ... to here.
robertmh [Wed, 12 Nov 2008 17:43:39 +0000 (17:43 +0000)]
2008-11-12 Robert Millan <rmh@aybabtu.com>
Fix build problems on i386-ieee1275 and *-efi (introduced by vga_text
split).
* include/grub/i386/pc/console.h: Include `<grub/i386/vga_common.h>'.
(grub_console_cur_color, grub_console_real_putchar)
(grub_console_putchar, grub_console_getcharwidth, grub_console_getwh)
(grub_console_setcolorstate, grub_console_setcolor)
(grub_console_getcolor): Move from here ...
* include/grub/i386/vga_common.h: ... to here (new file).
* term/i386/pc/vga_text.c: Replace `<grub/machine/console.h>' with
`<grub/i386/vga_common.h>' and `<grub/cpu/io.h>' with
`<grub/i386/io.h>'.
* term/i386/vga_common.c: Replace `<grub/machine/console.h>' with
`<grub/i386/vga_common.h>'.
* kern/i386/coreboot/init.c (grub_machine_init): Replace call to
grub_console_init() with call to grub_vga_text_init().
(grub_machine_fini): Replace call to
grub_console_fini() with call to grub_vga_text_fini() and
grub_at_keyboard_fini().
* include/grub/i386/pc/console.h: Include `<grub/term.h>'.
(grub_console_putchar, grub_console_getcharwidth, grub_console_getwh)
(grub_console_setcolorstate, grub_console_setcolor)
(grub_console_getcolor): New function prototypes.
* term/i386/pc/vga_text.c: Include `<grub/dl.h>'.
(grub_vga_text_getxy, grub_vga_text_gotoxy, grub_vga_text_cls)
(grub_vga_text_setcursor): Static-ize.
(grub_vga_text_term): New structure.
(GRUB_MOD_INIT(vga_text), GRUB_MOD_FINI(vga_text)): New functions.
* term/i386/pc/console.c: Remove `<grub/machine/machine.h>'.
(grub_console_cur_color, grub_console_standard_color)
(grub_console_normal_color, grub_console_highlight_color)
(map_char, grub_console_putchar, grub_console_getcharwidth)
(grub_console_getwh, grub_console_setcolorstate, grub_console_setcolor)
(grub_console_getcolor): Move from here ...
* term/i386/vga_common.c: ... to here (same function names).
robertmh [Tue, 11 Nov 2008 23:27:18 +0000 (23:27 +0000)]
2008-11-12 Robert Millan <rmh@aybabtu.com>
Use newly-added Multiboot support in coreboot.
* conf/i386-coreboot.rmk (kernel_elf_SOURCES): Replace
`kern/i386/coreboot/mmap.c' with `kern/i386/multiboot_mmap.c'.
* kern/i386/coreboot/startup.S: Enable Multiboot header, fix its
alignment, set `MULTIBOOT_MEMORY_INFO' flag.
(codestart): Store the MBI in `startup_multiboot_info' when we're
being loaded using Multiboot.
* kern/i386/coreboot/init.c (grub_machine_init): Move
grub_at_keyboard_init() call to beginning of function (useful for
debugging). Call grub_machine_mmap_init() before attempting to use
grub_machine_mmap_iterate().
(grub_lower_mem, grub_upper_mem): Move from here ...
* kern/i386/multiboot_mmap.c (grub_lower_mem, grub_upper_mem): ... to
here (new file).
* include/grub/i386/coreboot/memory.h (grub_machine_mmap_init): New
function prototype.
robertmh [Tue, 11 Nov 2008 23:16:54 +0000 (23:16 +0000)]
2008-11-12 Robert Millan <rmh@aybabtu.com>
Fix a regression introduced by the at_keyboard.mod split. Because
some terminals are default on some platforms and non-default on
others, the first terminal being registered determines which is
going to be default.
* kern/term.c (grub_term_register_input): If this is the first
terminal being registered, set it as the current one.
(grub_term_register_output): Likewise.
* term/efi/console.c (grub_console_init): Do not call
grub_term_set_current_output() or grub_term_set_current_input().
* term/ieee1275/ofconsole.c (grub_console_init): Likewise.
* term/i386/pc/console.c (grub_console_init): Likewise.
(grub_console_fini): Do not call grub_term_set_current_input()
(but leave grub_term_set_current_output() to restore text mode).
robertmh [Sat, 8 Nov 2008 12:17:51 +0000 (12:17 +0000)]
2008-11-08 Robert Millan <rmh@aybabtu.com>
* term/i386/pc/vesafb.c (grub_vesafb_term): Change type to
`struct grub_term_output'. Remove `.checkkey' and `.getkey'
members. Update all users.
* util/console.c (grub_ncurses_term): Split in ...
(grub_ncurses_term_input): ... this, and ...
(grub_ncurses_term_output): ... this. Update all users.
robertmh [Fri, 7 Nov 2008 19:53:25 +0000 (19:53 +0000)]
2008-11-07 Robert Millan <rmh@aybabtu.com>
* include/multiboot2.h (struct multiboot_header): Add `flags' member as
per specification.
* loader/multiboot2.c (grub_multiboot2): Fix Multiboot2 header check.
* loader/multiboot_loader.c (find_multi_boot2_header): New function
(based on find_multi_boot1_header).
(grub_rescue_cmd_multiboot_loader): Check for Multiboot2 header,
using find_multi_boot2_header(), and abort if neither Multiboot or
Multiboot headers were found.
robertmh [Fri, 7 Nov 2008 19:11:39 +0000 (19:11 +0000)]
2008-11-07 Robert Millan <rmh@aybabtu.com>
Modularize at_keyboard.mod:
* conf/i386.rmk (pkglib_MODULES): Add `at_keyboard.mod'.
(at_keyboard_mod_SOURCES, at_keyboard_mod_CFLAGS)
(at_keyboard_mod_LDFLAGS): New variables.
Actual terminal split:
* include/grub/term.h (struct grub_term): Split in ...
(struct grub_term_input): ... this, and ...
(struct grub_term_output): ... this. Update all users.
(grub_term_set_current): Split in ...
(grub_term_set_current_input): ... this, and ...
(grub_term_set_current_output): ... this.
(grub_term_get_current): Split in ...
(grub_term_get_current_input): ... this, and ...
(grub_term_get_current_output): ... this.
(grub_term_register): Split in ...
(grub_term_register_input): ... this, and ...
(grub_term_register_output): ... this.
(grub_term_unregister): Split in ...
(grub_term_unregister_input): ... this, and ...
(grub_term_unregister_output): ... this.
(grub_term_iterate): Split in ...
(grub_term_iterate_input): ... this, and ...
(grub_term_iterate_output): ... this.
* kern/term.c (grub_term_list): Split in ...
(grub_term_list_input): ... this, and ...
(grub_term_list_output): ... this. Update all users.
(grub_cur_term): Split in ...
(grub_cur_term_input): ... this, and ...
(grub_cur_term_output): ... this. Update all users.
(grub_term_set_current): Split in ...
(grub_term_set_current_input): ... this, and ...
(grub_term_set_current_output): ... this.
(grub_term_get_current): Split in ...
(grub_term_get_current_input): ... this, and ...
(grub_term_get_current_output): ... this.
(grub_term_register): Split in ...
(grub_term_register_input): ... this, and ...
(grub_term_register_output): ... this.
(grub_term_unregister): Split in ...
(grub_term_unregister_input): ... this, and ...
(grub_term_unregister_output): ... this.
(grub_term_iterate): Split in ...
(grub_term_iterate_input): ... this, and ...
(grub_term_iterate_output): ... this.
* kern/misc.c (grub_abort): Split use of grub_term_get_current() into
a check for input and one for output (and only attempt to get keys
from user when input works).
* conf/i386-ieee1275.rmk (kernel_elf_SOURCES): Remove
`term/i386/pc/at_keyboard.c'.
* kern/ieee1275/init.c [__i386__] (grub_machine_init): Remove call to
grub_keyboard_controller_init() (now handled by terminal .init).
* kern/i386/coreboot/init.c (grub_machine_init): Add call to
grub_at_keyboard_init().
* include/grub/i386/ieee1275/console.h (grub_keyboard_controller_init)
(grub_console_checkkey, grub_console_getkey): Remove (now provided by
at_keyboard.mod via input terminal interface).
* include/grub/i386/coreboot/console.h: Convert into a stub for
`<grub/i386/pc/console.h>'.
Migrate full terminals to new API:
* term/efi/console.c (grub_console_term): Split into ...
(grub_console_term_input): ... this, and ...
(grub_console_term_output): ... this. Update all users.
* term/ieee1275/ofconsole.c: Remove __i386__ hack.
(grub_ofconsole_init): Split into ...
(grub_ofconsole_init_input): ... this, and ...
(grub_ofconsole_init_output): ... this.
(grub_ofconsole_term): Split into ...
(grub_ofconsole_term_input): ... this, and ...
(grub_ofconsole_term_output): ... this. Update all users.
* term/i386/pc/serial.c (grub_serial_term): Split into ...
(grub_serial_term_input): ... this, and ...
(grub_serial_term_output): ... this. Update all users.
* term/i386/pc/console.c (grub_console_term): Split into ...
(grub_console_term_input): ... this, and ...
(grub_console_term_output): ... this. Update all users.
(grub_console_term_input): Only enable it on PC/BIOS platform.
(grub_console_init): Remove grub_keyboard_controller_init() call.
Migrate input terminals to new API:
* term/i386/pc/at_keyboard.c: Replace `cpu' and `machine' with
`i386' and `i386/pc' to enable build on x86_64 (this driver is
i386-specific anyway).
(grub_console_checkkey): Rename to ...
(grub_at_keyboard_checkkey): ... this. Static-ize. Update all
users.
(grub_keyboard_controller_orig): New variable.
(grub_console_getkey): Rename to ...
(grub_at_keyboard_getkey): ... this. Static-ize. Update all
users.
(grub_keyboard_controller_init): Static-ize. Save original
controller value so that it can be restored ...
(grub_keyboard_controller_fini): ... here (new function).
(grub_at_keyboard_term): New structure.
(GRUB_MOD_INIT(at_keyboard), GRUB_MOD_FINI(at_keyboard)): New
functions.
Migrate output terminals to new API:
* term/i386/pc/vga.c (grub_vga_term): Change type to
`struct grub_term_output'. Remove `.checkkey' and `.getkey'
members. Update all users.
* term/gfxterm.c (grub_video_term): Change type to
`struct grub_term_output'. Remove `.checkkey' and `.getkey'
members. Update all users.
* include/grub/i386/pc/console.h (grub_console_checkkey)
(grub_console_getkey): Do not export (no longer needed by gfxterm,
etc).
Migrate `terminal' command and userland tools to new API:
* commands/terminal.c (grub_cmd_terminal): Split into ...
(grub_cmd_terminal_input): ... this, and ...
(grub_cmd_terminal_output): ... this.
(GRUB_MOD_INIT(terminal)): Split `terminal' command in two commands:
`terminal_input' and `terminal_output'.
* util/grub.d/00_header.in: Adjust `terminal' calls to new
`terminal_input' / `terminal_output' API.
* util/grub-mkconfig.in: Export ${GRUB_TERMINAL_INPUT} and
${GRUB_TERMINAL_OUTPUT} instead of ${GRUB_TERMINAL} (and if user
provided ${GRUB_TERMINAL}, convert it).
* disk/lvm.c (grub_lvm_scan_device): Fix possible NULL value handling
(add a missing NULL check, and correct them by moving the pointer
operations after the actual check).
robertmh [Sun, 5 Oct 2008 10:51:23 +0000 (10:51 +0000)]
2008-10-05 Hans Lambermont <hans@lambermont.dyndns.org>
* disk/lvm.c (grub_lvm_scan_device): Allocate buffer space for the
circular metadata worst case scenario. If the metadata is circular
then copy the wrap in place.
* include/grub/lvm.h: Add GRUB_LVM_MDA_HEADER_SIZE, from the LVM2
project lib/format_text/layout.h
Circular metadata bug found and patch debugged by Jan Derk Gerlings.
* util/update-grub_lib.in: Copy to ...
* util/grub-mkconfig_lib.in: ... this. Update all users.
* util/update-grub_lib.in: Make it a stub to `grub-mkconfigig_lib.in'.
* util/update-grub.in: Rename to ...
* util/grub-mkconfig.in: ... this. Update all users. Remove `-y'
option. Add `--output' option to allow users to specify the generated
configuration file. Default to stdout.
(update_grub_dir): Rename to ...
(grub_mkconfig_dir): ... this.
(grub_cfg): Default to an empty string.
* conf/common.rmk (update-grub): Rename to ...
(grub-mkconfig): ... this.
(update-grub_lib): Copy to ...
(grub-mkconfig_lib): ... this.
(update-grub_SCRIPTS): Copy to ...
(grub-mkconfig_SCRIPTS): ... this. Update all users.
(update-grub_DATA): Rename to ...
(grub-mkconfig_DATA): ... this.
* fs/iso9660.c (struct grub_iso9660_primary_voldesc): Rename `created'
to `modified'. Add the real `created' field.
(grub_iso9660_uuid): Use `modified' rather than `created' for
constructing the UUID.
* disk/ata.c (grub_apapi_open): Initialize devfnd, no need to set
scsi->name and scsi->luns, as they will be set in grub_scsi_open.
* disk/scsi.c (grub_scsi_open): Don't call p->close (scsi) here when
error occurs, as grub_disk_open will call grub_disk_close, which will
call p->close (scsi).
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf32): Skip
segments when their filesz is zero (grub_file_read() interprets
zero-size as "read untill EOF", which results in memory corruption).
Use `lowest_segment' rather than 0 for calculating the current
segment load address.
* util/hostdisk.c (open_device): Replace a grub_util_info() call
with grub_dprintf("hostdisk", ...), as it was so verbose that it
clobbered useful information.
* loader/i386/pc/multiboot.c (mmap_addr, mmap_length): Remove
variables.
(grub_multiboot): Move `mbi' allocation upwards, so that mmap address
and length can be stored directly in the `mbi->mmap_addr' and
`mbi->mmap_length' struct fields.
projects / grub2.git / log