He Kuang [Mon, 11 May 2015 12:28:35 +0000 (12:28 +0000)]
perf tests: Fix to get negative exit codes
WEXITSTATUS consists of the least significant 8 bits of the status
argument, so we should convert the value to signed char if we have valid
negative exit codes. And the return value of test->func() contains
negative values:
He Kuang [Mon, 11 May 2015 09:25:04 +0000 (09:25 +0000)]
perf probe: Show better error message when failed to find variable
Indicate to check variable location range in error message when we got
failed to find the variable.
Before this patch:
$ perf probe --add 'generic_perform_write+118 bytes'
Failed to find the location of bytes at this address.
Perhaps, it has been optimized out.
Error: Failed to add events.
After this patch:
$ perf probe --add 'generic_perform_write+118 bytes'
Failed to find the location of the 'bytes' variable at this address.
Perhaps it has been optimized out.
Use -V with the --range option to show 'bytes' location range.
Error: Failed to add events.
Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1431336304-16863-3-git-send-email-hekuang@huawei.com
[ Improve the error message based on lkml thread ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
He Kuang [Mon, 11 May 2015 09:25:03 +0000 (09:25 +0000)]
perf probe: Add --range option to show a variable's location range
It is not easy for users to get the accurate byte offset or the line
number where a local variable can be probed.
With '--range' option, local variables in the scope of the probe point
are showed with a byte offset range, and can be added according to this
range information.
For example, there are some variables in the function
generic_perform_write():
But we fail when we try to probe the variable 'a_ops' at line 42 or 44.
$ perf probe --add 'generic_perform_write:42 a_ops'
Failed to find the location of a_ops at this address.
Perhaps, it has been optimized out.
This is because the source code do not match the assembly, so a variable
may not be available in the source code line where it appears.
After this patch, we can lookup the accurate byte offset range of a
variable, 'INV' indicates that this variable is not valid at the given
point, but available in the scope:
$ perf probe --vars 'generic_perform_write:42' --range
Available variables at generic_perform_write:42
@<generic_perform_write+141>
[INV] ssize_t written @<generic_perform_write+[324-331]>
[INV] struct address_space_operations* a_ops @<generic_perform_write+[55-61,170-176,223-246]>
[VAL] (unknown_type) fsdata @<generic_perform_write+[70-307,346-411]>
[VAL] loff_t pos @<generic_perform_write+[0-286,286-336,346-411]>
[VAL] long int status @<generic_perform_write+[83-342,346-411]>
[VAL] long unsigned int bytes @<generic_perform_write+[122-311,320-338,346-403,403-411]>
[VAL] struct address_space* mapping @<generic_perform_write+[35-344,346-411]>
[VAL] struct iov_iter* i @<generic_perform_write+[0-340,346-411]>
[VAL] struct page* page @<generic_perform_write+[70-307,346-411]>
Then it is more clear for us to add a probe with this variable:
$ perf probe --add 'generic_perform_write+170 a_ops'
Added new event:
probe:generic_perform_write (on generic_perform_write+170 with a_ops)
Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1431336304-16863-2-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
He Kuang [Mon, 11 May 2015 09:25:02 +0000 (09:25 +0000)]
perf probe: Remove length limitation for showing available variables
Use struct strbuf instead of bare char[] to remove the length limitation
of variables in variable_list, so they will not disappear due to
overlength, and make preparation for adding more description for
variables.
Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1431336304-16863-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf kmem: Fix compiler warning about may be accessing uninitialized variable
The last argument to strtok_r doesn't need to be initialized, its just a
placeholder to make this routine reentrant, but gcc doesn't know about
that and complains, breaking the build, fix it by setting it to NULL.
Fixes: 0e11115644b3 ("perf kmem: Print gfp flags in human readable string") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-iyyvkbnkrd9g19f6ta9zfkem@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf/x86/intel/uncore: Add Broadwell-U uncore IMC PMU support
This patch enables the uncore Memory Controller (IMC) PMU
support for Intel Broadwell-U (Model 61) mobile processors.
The IMC PMU enables measuring memory bandwidth.
To use with perf:
$ perf stat -a -I 1000 -e
uncore_imc/data_reads/,uncore_imc/data_writes/ sleep 10
Ingo Molnar [Sat, 9 May 2015 06:10:36 +0000 (08:10 +0200)]
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- 'perf probe' improvements: (Masami Hiramatsu)
- Support glob wildcards for function name
- Support $params special probe argument: Collect all function arguments
- Make --line checks validate C-style function name.
- Add --no-inlines option to avoid searching inline functions
- Introduce new 'perf bench futex' benchmark: 'wake-parallel', to
measure parallel waker threads generating contention for kernel
locks (hb->lock). (Davidlohr Bueso)
Bug fixes:
- Improve 'perf top' to survive much longer on high core count machines,
more work needed to refcount more data structures besides 'struct thread'
and fix more races. (Arnaldo Carvalho de Melo)
Infrastructure changes:
- Move barrier.h mb/rmb/wmb API from tools/perf/ to kernel like tools/arch/
hierarchy. (Arnaldo Carvalho de Melo)
- Borrow atomic.h from the kernel, initially the x86 implementations
with a fallback to gcc intrinsics for the other arches, all the kernel
like framework in place for doing arch specific implementations,
preferrably cloning what is in the kernel to the greater extent
possible. (Arnaldo Carvalho de Melo)
- Protect the 'struct thread' lifetime with a reference counter,
and protect data structures that contains its instances with
a mutex. (Arnaldo Carvalho de Melo
- Disable libdw DWARF unwind when built with NO_DWARF (Naveen N. Rao)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf probe: Support glob wildcards for function name
Support glob wildcards for function name when adding new probes. This
will allow us to build caches of function-entry level information with
$params.
e.g.
----
# perf probe --no-inlines --add 'kmalloc* $params'
Added new events:
probe:kmalloc_slab (on kmalloc* with $params)
probe:kmalloc_large_node (on kmalloc* with $params)
probe:kmalloc_order_trace (on kmalloc* with $params)
You can now use it in all perf tools, such as:
perf record -e probe:kmalloc_order_trace -aR sleep 1
# perf probe --list
probe:kmalloc_large_node (on kmalloc_large_node@mm/slub.c with size flags node)
probe:kmalloc_order_trace (on kmalloc_order_trace@mm/slub.c with size flags order)
probe:kmalloc_slab (on kmalloc_slab@mm/slab_common.c with size flags)
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150508010335.24812.19972.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Davidlohr Bueso [Fri, 8 May 2015 18:37:59 +0000 (11:37 -0700)]
perf bench futex: Support parallel waker threads
The futex-wake benchmark only measures wakeups done within a single
process. While this has value in its own, it does not really generate
any hb->lock contention.
A new benchmark 'wake-parallel' is added, by extending the futex-wake
code such that we can measure parallel waker threads. The program output
shows the avg per-thread latency in order to complete its share of
wakeups:
Run summary [PID 13474]: blocking on 512 threads (at [private] futex 0xa88668), 8 threads waking up 64 at a time.
[Run 1]: Avg per-thread latency (waking 64/512 threads) in 0.6230 ms (+-15.31%)
[Run 2]: Avg per-thread latency (waking 64/512 threads) in 0.5175 ms (+-29.95%)
[Run 3]: Avg per-thread latency (waking 64/512 threads) in 0.7578 ms (+-18.03%)
[Run 4]: Avg per-thread latency (waking 64/512 threads) in 0.8944 ms (+-12.54%)
[Run 5]: Avg per-thread latency (waking 64/512 threads) in 1.1204 ms (+-23.85%)
Avg per-thread latency (waking 64/512 threads) in 0.7826 ms (+-9.91%)
Naturally, different combinations of numbers of blocking and waker
threads will exhibit different information.
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools: Move barrier() definition to tools/include/linux/compiler.h
To make it generally accessible by other tools/ projects, also will be
used in the tools/arch/*/include/asm/barrier.h files that are being
introduced now.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qnjdqwu3vcnt14vqmr6wu788@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe: Support $params special probe argument
$params is similar to $vars but matches only function parameters not
local variables.
Thus, this is useful for tracing function parameter changing or tracing
function call with parameters.
Testing it:
# perf probe tcp_sendmsg '$params'
Added new event:
probe:tcp_sendmsg (on tcp_sendmsg with $params)
You can now use it in all perf tools, such as:
perf record -e probe:tcp_sendmsg -aR sleep 1
# perf probe -l
probe:tcp_sendmsg (on tcp_sendmsg@acme/git/linux/net/ipv4/tcp.c with iocb sk msg size)
# perf record -a -e probe:*
press some random letters to generate TCP (sshd) traffic...
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.223 MB perf.data (6 samples) ]
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150506124653.4961.59806.stgit@localhost.localdomain
[ Add some examples to the changelog message showing how to use it ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe: Skip kernel symbols which is out of .text
Skip the kernel symbols which is out of .text, e.g. the functions
in .inittext. Those are found in debuginfo/kallsyms, but already
freed from memory.
e.g.
----
# perf probe vfs_caches_init
vfs_caches_init+0 is out of .text, skip it.
Probe point 'vfs_caches_init' not found.
Error: Failed to add events.
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150506124649.4961.56249.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe: Make --line checks validate C-style function name
Fix --line to check valid C-style function name and returns
a semantic error if it is not.
For example, previously, --line doesn't support lazy pattern
but it doesn't recognized as a semantic error.
----
# perf probe -L 'func;return*:0-10'
Specified source line is not found.
Error: Failed to show lines.
----
With this patch, it is correctly handled as a semantic error.
----
# perf probe -L 'func;return*:0-10'
Semantic error :'func;return*' is not a valid function name.
...
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150506124647.4961.99473.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe: Fix to return 0 when positive value returned
Fix to return 0 when positive value returned from probe command.
At least --vars can returns a positive value if it found a point.
----
# perf probe --vars vfs_read && echo succeeded! || echo failed!
Available variables at vfs_read
@<vfs_read+0>
char* buf
loff_t* pos
size_t count
struct file* file
failed!
----
perf_event: Don't allow vmalloc() backed perf on powerpc
On powerpc the perf event interrupt is not masked when interrupts are
disabled, allowing it to function as an NMI.
This causes problems if perf is using vmalloc. If we take a page fault
on the vmalloc region the fault handler will fail the page fault because
it detects we are coming in from an NMI (see do_hash_page()).
We don't actually need or want vmalloc backed perf so just disable it on
powerpc.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <linuxppc-dev@ozlabs.org> Cc: Andrew Morton <akpm@osdl.org> Cc: Anton Blanchard <anton@samba.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@ghostprotocols.net Cc: sukadev@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1430720799-18426-1-git-send-email-mpe@ellerman.id.au Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Fri, 17 Apr 2015 18:05:30 +0000 (20:05 +0200)]
perf: Fix software migrate events
Stephane asked about PERF_COUNT_SW_CPU_MIGRATIONS and I realized it
was borken:
> The problem is that the task isn't actually scheduled while its being
> migrated (obviously), and if its not scheduled, the counters aren't
> scheduled either, so there's no observing of the fact.
>
> A further problem with migrations is that many migrations happen from
> softirq context, which is nested inside the 'random' task context of
> whoemever happens to run at that time, similarly for the wakeup
> migrations triggered from (soft)irq context. All those end up being
> accounted in the task that's currently running, eg. your 'ls'.
The below cures this by marking a task as migrated and accounting it
on the subsequent sched_in().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kan Liang [Tue, 21 Apr 2015 09:34:41 +0000 (05:34 -0400)]
perf/x86/intel: Fix SLM cache event list
iTLB-load-misses and LLC-load-misses count incorrectly on SLM.
There is no ITLB.MISSES support on SLM. Event PAGE_WALKS.I_SIDE_WALK
should be used to count iTLB-load-misses. This event counts when an
instruction (I) page walk is completed or started. Since a page walk
implies a TLB miss, the number of TLB misses can be counted by counting
the number of pagewalks.
DMND_DATA_RD counts both demand and DCU prefetch data reads. However,
LLC-load-misses should only count demand reads. There is no way to not
include prefetches with a single counter on SLM. So the LLC-load-misses
support should be removed on SLM.
Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1429608881-5055-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Thu, 7 May 2015 22:58:00 +0000 (15:58 -0700)]
Merge tag 'pm+acpi-4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These include three regression fixes (PCI resources management,
ACPI/PNP device enumeration, ACPI SBS on MacBook) and two ACPI
documentation fixes related to GPIO.
Specifics:
- Fix for a PCI resources management regression introduced during the
4.0 cycle and related to the handling of ACPI resources'
Producer/Consumer flags that turn out to be useless (Jiang Liu)
- Fix for a MacBook regression related to the Smart Battery Subsystem
(SBS) driver causing various problems (stalls on boot, failure to
detect or report battery) to happen and introduced during the 3.18
cycle (Chris Bainbridge)
- Fix for an ACPI/PNP device enumeration regression introduced during
the 3.16 cycle caused by failing to include two PNP device IDs into
the list of IDs that PNP device objects need to be created for
(Witold Szczeponik)
- Fixes for two minor mistakes in the ACPI GPIO properties
documentation (Antonio Ospite, Rafael J Wysocki)"
* tag 'pm+acpi-4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / PNP: add two IDs to list for PNPACPI device enumeration
ACPI / documentation: Fix ambiguity in the GPIO properties document
ACPI / documentation: fix a sentence about GPIO resources
ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook
x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI bus
Linus Torvalds [Thu, 7 May 2015 15:27:38 +0000 (08:27 -0700)]
Merge tag 'pinctrl-v4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here is a smallish set of pin control fixes for the v4.1 cycle,
collected the last two weeks:
- fix a real nasty legacy bug that has screwed up the protection of
adding pinctrl maps dynamically. Normally this didn't happen so
much but Dough Anderson ran into it and fixed it, kudos!
- minor driver fixes for Qualcomm spmi, mediatek and Marvell drivers"
* tag 'pinctrl-v4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: Don't just pretend to protect pinctrl_maps, do it for real
pinctrl: mediatek: mtk-common: initialize unmask
pinctrl: qcom-spmi-mpp: Fix input value report
pinctrl: qcom-spmi: Fix pin direction configuration
pinctrl: mvebu: Fix mapping of pin 63 (gpo -> gpio)
Linus Torvalds [Thu, 7 May 2015 14:04:33 +0000 (07:04 -0700)]
Merge tag 'for-linus' of git://github.com/dledford/linux
Pull infiniband updates from Doug Ledford:
"Minor updates for 4.1-rc
Most of the changes are fairly small and well confined. The iWARP
address reporting changes are the only ones that are a medium size. I
had these queued up prior to rc1, but due to the shuffle in
maintainers, they did not get submitted when I expected. My apologies
for that. I feel comfortable with them however due to the testing
they've received, so I left them in this submission"
* tag 'for-linus' of git://github.com/dledford/linux:
MAINTAINERS: Update InfiniBand subsystem maintainer
MAINTAINERS: add include/rdma/ to InfiniBand subsystem
IPoIB/CM: Fix indentation level
iw_cxgb4: Remove negative advice dmesg warnings
IB/core: Fix unaligned accesses
IB/core: change rdma_gid2ip into void function as it always return zero
IB/qib: use arch_phys_wc_add()
IB/qib: add acounting for MTRR
IB/core: dma unmap optimizations
IB/core: dma map/unmap locking optimizations
RDMA/cxgb4: Report the actual address of the remote connecting peer
RDMA/nes: Report the actual address of the remote connecting peer
RDMA/core: Enable the iWarp Port Mapper to provide the actual address of the connecting peer to its clients
iw_cxgb4: enforce qp/cq id requirements
iw_cxgb4: use BAR2 GTS register for T5 kernel mode CQs
iw_cxgb4: 32b platform fixes
iw_cxgb4: Cleanup register defines/MACROS
RDMA/CMA: Canonize IPv4 on IPV6 sockets properly
Linus Torvalds [Wed, 6 May 2015 22:58:06 +0000 (15:58 -0700)]
Merge tag 'for-linus-4.1b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- fix blkback regression if using persistent grants
- fix various event channel related suspend/resume bugs
- fix AMD x86 regression with X86_BUG_SYSRET_SS_ATTRS
- SWIOTLB on ARM now uses frames <4 GiB (if available) so device only
capable of 32-bit DMA work.
* tag 'for-linus-4.1b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Add __GFP_DMA flag when xen_swiotlb_init gets free pages on ARM
hypervisor/x86/xen: Unset X86_BUG_SYSRET_SS_ATTRS on Xen PV guests
xen/events: Set irq_info->evtchn before binding the channel to CPU in __startup_pirq()
xen/console: Update console event channel on resume
xen/xenbus: Update xenbus event channel on resume
xen/events: Clear cpu_evtchn_mask before resuming
xen-pciback: Add name prefix to global 'permissive' variable
xen: Suspend ticks on all CPUs during suspend
xen/grant: introduce func gnttab_unmap_refs_sync()
xen/blkback: safely unmap purge persistent grants
Linus Torvalds [Wed, 6 May 2015 17:57:37 +0000 (10:57 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"EFI fixes, and FPU fix, a ticket spinlock boundary condition fix and
two build fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Always restore_xinit_state() when use_eager_cpu()
x86: Make cpu_tss available to external modules
efi: Fix error handling in add_sysfs_runtime_map_entry()
x86/spinlocks: Fix regression in spinlock contention detection
x86/mm: Clean up types in xlate_dev_mem_ptr()
x86/efi: Store upper bits of command line buffer address in ext_cmd_line_ptr
efivarfs: Ensure VariableName is NUL-terminated
Linus Torvalds [Wed, 6 May 2015 17:47:25 +0000 (10:47 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also an uncore PMU driver fix and an uncore
PMU driver hardware-enablement addition"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf probe: Fix segfault if passed with ''.
perf report: Fix -T/--threads option to work again
perf bench numa: Fix immediate meeting of convergence condition
perf bench numa: Fixes of --quiet argument
perf bench futex: Fix hung wakeup tasks after requeueing
perf probe: Fix bug with global variables handling
perf top: Fix a segfault when kernel map is restricted.
tools lib traceevent: Fix build failure on 32-bit arch
perf kmem: Fix compiles on RHEL6/OL6
tools lib api: Undefine _FORTIFY_SOURCE before setting it
perf kmem: Consistently use PRIu64 for printing u64 values
perf trace: Disable events and drain events when forked workload ends
perf trace: Enable events when doing system wide tracing and starting a workload
perf/x86/intel/uncore: Move PCI IDs for IMC to uncore driver
perf/x86/intel/uncore: Add support for Intel Haswell ULT (lower power Mobile Processor) IMC uncore PMUs
perf/x86/intel: Add cpu_(prepare|starting|dying) for core_pmu
Doug Anderson [Fri, 1 May 2015 16:01:27 +0000 (09:01 -0700)]
pinctrl: Don't just pretend to protect pinctrl_maps, do it for real
Way back, when the world was a simpler place and there was no war, no
evil, and no kernel bugs, there was just a single pinctrl lock. That
was how the world was when (57291ce pinctrl: core device tree mapping
table parsing support) was written. In that case, there were
instances where the pinctrl mutex was already held when
pinctrl_register_map() was called, hence a "locked" parameter was
passed to the function to indicate that the mutex was already locked
(so we shouldn't lock it again).
A few years ago in (42fed7b pinctrl: move subsystem mutex to
pinctrl_dev struct), we switched to a separate pinctrl_maps_mutex.
...but (oops) we forgot to re-think about the whole "locked" parameter
for pinctrl_register_map(). Basically the "locked" parameter appears
to still refer to whether the bigger pinctrl_dev mutex is locked, but
we're using it to skip locks of our (now separate) pinctrl_maps_mutex.
That's kind of a bad thing(TM). Probably nobody noticed because most
of the calls to pinctrl_register_map happen at boot time and we've got
synchronous device probing. ...and even cases where we're
asynchronous don't end up actually hitting the race too often. ...but
after banging my head against the wall for a bug that reproduced 1 out
of 1000 reboots and lots of looking through kgdb, I finally noticed
this.
Anyway, we can now safely remove the "locked" parameter and go back to
a war-free, evil-free, and kernel-bug-free world.
Fixes: 42fed7ba44e4 ("pinctrl: move subsystem mutex to pinctrl_dev struct") Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
xen: Add __GFP_DMA flag when xen_swiotlb_init gets free pages on ARM
Make sure that xen_swiotlb_init allocates buffers that are DMA capable
when at least one memblock is available below 4G. Otherwise we assume
that all devices on the SoC can cope with >4G addresses. We do this on
ARM and ARM64, where dom0 is mapped 1:1, so pfn == mfn in this case.
Bobby Powers [Mon, 27 Apr 2015 15:10:41 +0000 (08:10 -0700)]
x86/fpu: Always restore_xinit_state() when use_eager_cpu()
The following commit:
f893959b0898 ("x86/fpu: Don't abuse drop_init_fpu() in flush_thread()")
removed drop_init_fpu() usage from flush_thread(). This seems to break
things for me - the Go 1.4 test suite fails all over the place with
floating point comparision errors (offending commit found through
bisection).
The functional change was that flush_thread() after this commit
only calls restore_init_xstate() when both use_eager_fpu() and
!used_math() are true. drop_init_fpu() (now fpu_reset_state()) calls
restore_init_xstate() regardless of whether current used_math() - apply
the same logic here.
Switch used_math() -> tsk_used_math(tsk) to consistently use the grabbed
tsk instead of current, like in the rest of flush_thread().
Tested-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Bobby Powers <bobbypowers@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pekka Riikonen <priikone@iki.fi> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Rik van Riel <riel@redhat.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: f893959b ("x86/fpu: Don't abuse drop_init_fpu() in flush_thread()") Link: http://lkml.kernel.org/r/1430147441-9820-1-git-send-email-bobbypowers@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Wed, 6 May 2015 02:42:12 +0000 (04:42 +0200)]
Merge tag 'perf-core-for-mingo-3' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Improve --filter support for 'perf probe', allowing using its arguments
on other commands, as --add, --del, etc (Masami Hiramatsu)
- Show warning when running 'perf kmem stat' on a unsuitable perf.data file,
i.e. one with events that are not the ones required for the stat variant
used (Namhyung Kim).
Infrastructure changes:
- Auxtrace support patches, paving the way to support Intel PT and BTS (Adrian Hunter)
Linus Torvalds [Wed, 6 May 2015 02:42:01 +0000 (19:42 -0700)]
Merge tag 'for-linus-4.1-1' of git://git.code.sf.net/p/openipmi/linux-ipmi
Pull IPMI fixes from Corey Minyard:
"Lots of minor IPMI fixes, especially ones that have have come up since
the SSIF driver has been in the main kernel for a while"
* tag 'for-linus-4.1-1' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi: Fix multi-part message handling
ipmi: Add alert handling to SSIF
ipmi: Fix a problem that messages are not issued in run_to_completion mode
ipmi: Report an error if ACPI _IFT doesn't exist
ipmi: Remove unused including <linux/version.h>
ipmi: Don't report err in the SI driver for SSIF devices
ipmi: Remove incorrect use of seq_has_overflowed
ipmi:ssif: Ignore spaces when comparing I2C adapter names
ipmi_ssif: Fix the logic on user-supplied addresses
Linus Torvalds [Wed, 6 May 2015 01:52:13 +0000 (18:52 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"16 patches
This includes a new rtc driver for the Abracon AB x80x and isn't very
appropriate for -rc2. It was still being fiddled with a bit during
the merge window and I fell asleep during -rc1"
[ So I took the new driver, it seems small and won't regress anything.
I'm a softy. - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
rtc: armada38x: fix concurrency access in armada38x_rtc_set_time
ocfs2: dlm: fix race between purge and get lock resource
nilfs2: fix sanity check of btree level in nilfs_btree_root_broken()
util_macros.h: have array pointer point to array of constants
configfs: init configfs module earlier at boot time
mm/hwpoison-inject: check PageLRU of hpage
mm/hwpoison-inject: fix refcounting in no-injection case
mm: soft-offline: fix num_poisoned_pages counting on concurrent events
rtc: add rtc-abx80x, a driver for the Abracon AB x80x i2c rtc
Documentation: bindings: add abracon,abx80x
kasan: show gcc version requirements in Kconfig and Documentation
mm/memory-failure: call shake_page() when error hits thp tail page
lib: delete lib/find_last_bit.c
MAINTAINERS: add co-maintainer for LED subsystem
zram: add Designated Reviewer for zram in MAINTAINERS
revert "zram: move compact_store() to sysfs functions area"
Linus Torvalds [Wed, 6 May 2015 01:14:04 +0000 (18:14 -0700)]
Merge tag 'platform-drivers-x86-v4.1-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"This includes a trivial warning and adding a Lenovo laptop to an
existing quirk.
I've held off on things like the latter in the past, but I didn't feel
it was risky enough to push out to 4.2.
- thinkpad_acpi:
Fix warning for static not at beginning
- ideapad_laptop:
Add Lenovo G40-30 to devices without radio switch"
* tag 'platform-drivers-x86-v4.1-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
thinkpad_acpi: Fix warning for static not at beginning
ideapad_laptop: Add Lenovo G40-30 to devices without radio switch
The values was not being re-initialized, if something went wrong
handling a multi-part message and it got left in a bad state, it
might be an issue.
The commands were not correct when issuing multi-part reads, the
code was not passing in the proper value for commands. Also clean
up some minor formatting issues.
Get the block number from the right location, limit the maximum send
message size to 63 bytes and explain why, and fix some minor sylistic
issues.
The SSIF interface can optionally have an SMBus alert come in when
data is ready. Unfortunately, the IPMI spec gives wiggle room to
the implementer to allow them to always have the alert enabled,
even if the driver doesn't enable it. So implement alerts.
If you don't in this situation, the SMBus alert handling will
constantly complain.
ipmi: Fix a problem that messages are not issued in run_to_completion mode
start_next_msg() issues a message placed in smi_info->waiting_msg
if it is non-NULL. However, sender() sets a message to
smi_info->curr_msg and NULL to smi_info->waiting_msg in the context
of run_to_completion mode. As the result, it leads an infinite
loop by waiting the completion of unissued message when leaving
dying message after kernel panic.
sender() should set the message to smi_info->waiting_msg not
curr_msg.
Gregory CLEMENT [Tue, 5 May 2015 23:24:05 +0000 (16:24 -0700)]
rtc: armada38x: fix concurrency access in armada38x_rtc_set_time
While setting the time, the RTC TIME register should not be accessed.
However due to hardware constraints, setting the RTC time involves
sleeping during 100ms. This sleep was done outside the critical section
protected by the spinlock, so it was possible to read the RTC TIME
register and get an incorrect value. This patch introduces a mutex for
protecting the RTC TIME access, unlike the spinlock it is allowed to
sleep in a critical section protected by a mutex.
The RTC STATUS register can still be used from the interrupt handler but
it has no effect on setting the time.
Junxiao Bi [Tue, 5 May 2015 23:24:02 +0000 (16:24 -0700)]
ocfs2: dlm: fix race between purge and get lock resource
There is a race window in dlm_get_lock_resource(), which may return a
lock resource which has been purged. This will cause the process to
hang forever in dlmlock() as the ast msg can't be handled due to its
lock resource not existing.
dlm_get_lock_resource {
...
spin_lock(&dlm->spinlock);
tmpres = __dlm_lookup_lockres_full(dlm, lockid, namelen, hash);
if (tmpres) {
spin_unlock(&dlm->spinlock);
>>>>>>>> race window, dlm_run_purge_list() may run and purge
the lock resource
spin_lock(&tmpres->spinlock);
...
spin_unlock(&tmpres->spinlock);
}
}
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ryusuke Konishi [Tue, 5 May 2015 23:24:00 +0000 (16:24 -0700)]
nilfs2: fix sanity check of btree level in nilfs_btree_root_broken()
The range check for b-tree level parameter in nilfs_btree_root_broken()
is wrong; it accepts the case of "level == NILFS_BTREE_LEVEL_MAX" even
though the level is limited to values in the range of 0 to
(NILFS_BTREE_LEVEL_MAX - 1).
Since the level parameter is read from storage device and used to index
nilfs_btree_path array whose element count is NILFS_BTREE_LEVEL_MAX, it
can cause memory overrun during btree operations if the boundary value
is set to the level parameter on device.
This fixes the broken sanity check and adds a comment to clarify that
the upper bound NILFS_BTREE_LEVEL_MAX is exclusive.
Guenter Roeck [Tue, 5 May 2015 23:23:57 +0000 (16:23 -0700)]
util_macros.h: have array pointer point to array of constants
Using the new find_closest() macro can result in the following sparse
warnings.
drivers/hwmon/lm85.c:194:16: warning:
incorrect type in initializer (different modifiers)
drivers/hwmon/lm85.c:194:16: expected int *__fc_a
drivers/hwmon/lm85.c:194:16: got int static const [toplevel] *<noident>
drivers/hwmon/lm85.c:210:16: warning:
incorrect type in initializer (different modifiers)
drivers/hwmon/lm85.c:210:16: expected int *__fc_a
drivers/hwmon/lm85.c:210:16: got int const *map
This is because the array passed to find_closest() will typically be
declared as array of constants, but the macro declares a non-constant
pointer to it.
Naoya Horiguchi [Tue, 5 May 2015 23:23:52 +0000 (16:23 -0700)]
mm/hwpoison-inject: check PageLRU of hpage
Hwpoison injector checks PageLRU of the raw target page to find out
whether the page is an appropriate target, but current code now filters
out thp tail pages, which prevents us from testing for such cases via this
interface. So let's check hpage instead of p.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Dean Nelson <dnelson@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Tue, 5 May 2015 23:23:49 +0000 (16:23 -0700)]
mm/hwpoison-inject: fix refcounting in no-injection case
Hwpoison injection via debugfs:hwpoison/corrupt-pfn takes a refcount of
the target page. But current code doesn't release it if the target page
is not supposed to be injected, which results in memory leak. This patch
simply adds the refcount releasing code.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Dean Nelson <dnelson@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Tue, 5 May 2015 23:23:46 +0000 (16:23 -0700)]
mm: soft-offline: fix num_poisoned_pages counting on concurrent events
If multiple soft offline events hit one free page/hugepage concurrently,
soft_offline_page() can handle the free page/hugepage multiple times,
which makes num_poisoned_pages counter increased more than once. This
patch fixes this wrong counting by checking TestSetPageHWPoison for normal
papes and by checking the return value of dequeue_hwpoisoned_huge_page()
for hugepages.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Dean Nelson <dnelson@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: <stable@vger.kernel.org> [3.14+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rtc: add rtc-abx80x, a driver for the Abracon AB x80x i2c rtc
This is a basic driver for the ultra-low-power Abracon AB x80x series of RTC
chips. It supports in particular, the supersets AB0805 and AB1805.
It allows reading and writing the time, and enables the supercapacitor/
battery charger.
[arnd@arndb.de: abx805 depends on i2c]
[alexandre.belloni@free-electrons.com: renam buffer from date to buf in abx80x_rtc_read_time()] Signed-off-by: Philippe De Muyter <phdm@macqel.be> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 5 May 2015 23:23:38 +0000 (16:23 -0700)]
kasan: show gcc version requirements in Kconfig and Documentation
The documentation shows a need for gcc > 4.9.2, but it's really >=. The
Kconfig entries don't show require versions so add them. Correct a
latter/later typo too. Also mention that gcc 5 required to catch out of
bounds accesses to global and stack variables.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Tue, 5 May 2015 23:23:35 +0000 (16:23 -0700)]
mm/memory-failure: call shake_page() when error hits thp tail page
Currently memory_failure() calls shake_page() to sweep pages out from
pcplists only when the victim page is 4kB LRU page or thp head page.
But we should do this for a thp tail page too.
Consider that a memory error hits a thp tail page whose head page is on
a pcplist when memory_failure() runs. Then, the current kernel skips
shake_pages() part, so hwpoison_user_mappings() returns without calling
split_huge_page() nor try_to_unmap() because PageLRU of the thp head is
still cleared due to the skip of shake_page().
As a result, me_huge_page() runs for the thp, which is broken behavior.
One effect is a leak of the thp. And another is to fail to isolate the
memory error, so later access to the error address causes another MCE,
which kills the processes which used the thp.
This patch fixes this problem by calling shake_page() for thp tail case.
Fixes: 385de35722c9 ("thp: allow a hwpoisoned head page to be put back to LRU") Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Acked-by: Dean Nelson <dnelson@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Jin Dongming <jin.dongming@np.css.fujitsu.com> Cc: <stable@vger.kernel.org> [3.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yury Norov [Tue, 5 May 2015 23:23:33 +0000 (16:23 -0700)]
lib: delete lib/find_last_bit.c
The file lib/find_last_bit.c was no longer used and supposed to be
deleted by commit 8f6f19dd51 ("lib: move find_last_bit to
lib/find_next_bit.c") but that delete didn't happen. This gets rid of
it.
Minchan Kim [Tue, 5 May 2015 23:23:28 +0000 (16:23 -0700)]
zram: add Designated Reviewer for zram in MAINTAINERS
Sergey Senozhatsky has contributed/reviewed to zram for a long time. He
is really helpful for maintaining zram so I want for him to continue
helping me as Designated Reviewer unless he hates it.
Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Namhyung Kim [Tue, 5 May 2015 14:55:46 +0000 (23:55 +0900)]
perf tools: Move TUI-specific fields out of map_symbol
The has_children and unfolded fields don't belong to the struct
map_symbol since they're used by the TUI only. Move those fields out of
map_symbol since the struct is also used by other places.
This will also help to compact the sizeof struct hist_entry.
Namhyung Kim [Wed, 22 Apr 2015 07:18:19 +0000 (16:18 +0900)]
perf hists browser: Split popup menu actions - part 2
Currently perf_evsel__hists_browse() function spins on a huge loop and
handles many key actions. Since it's hard to read and modify, let's
split it out into small helper functions.
The add_XXX_opt() functions are to register popup menu item on the
selected entry. When it adds an item, it also saves related data into
struct popup_action and returns 1 so that it can increase the number of
items (nr_options).
With this change, we can simplify the code just to call selected
callback function without considering various conditions. A callback
function named do_XXX is called with saved data when the item is
selected by user.
No functional change intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1429687101-4360-9-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 22 Apr 2015 07:18:18 +0000 (16:18 +0900)]
perf hists browser: Split popup menu actions
Currently perf_evsel__hists_browse() function spins on a huge loop and
handles many key actions. Since it's hard to read and modify, let's
split it out into small helper functions.
This patch introduces do_XXX() functions which corresponds to each goto
label. This way we can call such functions both from key press actions
and popup menu actions.
No functional change intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1429687101-4360-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 22 Apr 2015 07:18:17 +0000 (16:18 +0900)]
perf hists browser: Save perf_session_env in the hist_browser
The perf_session_env is to save system informantion at the recording
time to be refered in the hist browser. So it'd be better to keep in
the struct hist_browser. This is a preparation to later change.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1429687101-4360-7-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 22 Apr 2015 07:18:16 +0000 (16:18 +0900)]
perf hists browser: Save pstack in the hist_browser
The struct pstack is to save currently applied thread and/or dso filters
in the browser. So it'd be better to keep in the struct hist_browser.
This is a preparation to later change.
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1429687101-4360-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 22 Apr 2015 07:18:15 +0000 (16:18 +0900)]
perf hists browser: Save hist_browser_timer pointer in hist_browser
The struct hist_browser_timer is to carry perf-top related info
throughout the hist browser code. So it'd be better to keep in the
struct hist_browser. This is a preparation to later change.
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1429687101-4360-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 22 Apr 2015 07:18:14 +0000 (16:18 +0900)]
perf hists browser: Fix possible memory leak
The options array saves strings for each popup menu item. The number of
items can be vary according to the currently selected item. So it can
leak some memory if it's exited from a small item. Fix it by freeing
all items when loop terminates.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1429687101-4360-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 22 Apr 2015 07:18:13 +0000 (16:18 +0900)]
perf tools: Move init_have_children field to the unnamed union
The init_have_children is used to init callchain info only for TUI. So
it'd be better to move it to the TUI-specific unnamed union member.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1429687101-4360-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 22 Apr 2015 07:18:12 +0000 (16:18 +0900)]
perf tools: Move TUI-specific fields into unnamed union
Since perf diff only supports stdio output, TUI fields are only accessed
from perf report (or perf top). So add a new unnamed union and move
struct hist_entry_tui and those TUI-specific fields.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1429687101-4360-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 5 May 2015 14:52:52 +0000 (23:52 +0900)]
perf kmem: Show warning when trying to run stat without record
Sometimes one can mistakenly run 'perf kmem stat' without running 'perf
kmem record' before or with a different configuration like recording
--slab and stat --page. Show a warning message like the one below to
inform the user:
# perf kmem stat --page --caller
No page allocation events found. Have you run 'perf kmem record --page'?
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1430837572-31395-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe: Cleanup and consolidate command parsers
To simplify the 'perf probe' command code, consolidate some similar
functions and use command short-name for command classification, instead
of separate booleans.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150505152257.18790.41548.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / mirror_ubuntu-jammy-kernel.git / log