Cyril Roelandt reports that his JMicron JMS566 USB-SATA bridge fails
to handle WRITE commands with the FUA bit set, even though it claims
to support FUA. (Oddly enough, a later version of the same bridge,
version 2.03 as opposed to 1.14, doesn't claim to support FUA. Also
oddly, the bridge _does_ support FUA when using the UAS transport
instead of the Bulk-Only transport -- but this device was blacklisted
for uas in commit bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron
SATA enclosure") for apparently unrelated reasons.)
This patch adds a usb-storage unusual_devs entry with the BROKEN_FUA
flag. This allows the bridge to work properly with usb-storage.
Reported-and-tested-by: Cyril Roelandt <tipecaml@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2004221613110.11262-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
init_r_port can access pc104 array out of bounds. pc104 is a 2D array
defined to have 4 members. Each member has 8 submembers.
* we can have more than 4 (PCI) boards, i.e. [board] can be OOB
* line is not modulo-ed by anything, so the first line on the second
board can be 4, on the 3rd 12 or alike (depending on previously
registered boards). It's zero only on the first line of the first
board. So even [line] can be OOB, quite soon (with the 2nd registered
board already).
This code is broken for ages, so just avoid the OOB accesses and don't
try to fix it as we would need to find out the correct line number. Use
the default: RS232, if we are out.
Generally, if anyone needs to set the interface types, a module parameter
is past the last thing that should be used for this purpose. The
parameters' description says it's for ISA cards anyway.
If there is a lot(more then 16) of virtio-console devices
or virtio_console module is reloaded
- buffers 'vtermnos' and 'cons_ops' are overflowed.
In older kernels it overruns spinlock which leads to kernel freezing:
https://bugzilla.redhat.com/show_bug.cgi?id=1786239
To reproduce the issue, you can try simple script that
loads/unloads module. Something like this:
while [ 1 ]
do
modprobe virtio_console
sleep 2
modprobe -r virtio_console
sleep 2
done
Description of problem:
Guest get 'Call Trace' when loading module "virtio_console"
and unloading it frequently - clearly reproduced on kernel-4.18.0:
Check that the resolved slot (somewhat confusingly named 'start') is a
valid/allocated slot before doing the final comparison to see if the
specified gfn resides in the associated slot. The resolved slot can be
invalid if the binary search loop terminated because the search index
was incremented beyond the number of used slots.
This bug has existed since the binary search algorithm was introduced,
but went unnoticed because KVM statically allocated memory for the max
number of slots, i.e. the access would only be truly out-of-bounds if
all possible slots were allocated and the specified gfn was less than
the base of the lowest memslot. Commit 36947254e5f98 ("KVM: Dynamically
size memslot array based on number of used slots") eliminated the "all
possible slots allocated" condition and made the bug embarrasingly easy
to hit.
Fixes: 9c1a5d38780e6 ("kvm: optimize GFN to memslot lookup with large slots amount") Reported-by: syzbot+d889b59b2bb87d4047a2@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200408064059.8957-2-sean.j.christopherson@intel.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
tpm_ibmvtpm_send() can fail during PowerVM Live Partition Mobility resume
with an H_CLOSED return from ibmvtpm_send_crq(). The PAPR says, 'The
"partner partition suspended" transport event disables the associated CRQ
such that any H_SEND_CRQ hcall() to the associated CRQ returns H_Closed
until the CRQ has been explicitly enabled using the H_ENABLE_CRQ hcall.'
This patch adds a check in tpm_ibmvtpm_send() for an H_CLOSED return from
ibmvtpm_send_crq() and in that case calls tpm_ibmvtpm_resume() and
retries the ibmvtpm_send_crq() once.
Cc: stable@vger.kernel.org # 3.7.x Fixes: 132f76294744 ("drivers/char/tpm: Add new device driver to support IBM vTPM") Reported-by: Linh Pham <phaml@us.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: George Wilson <gcwilson@linux.ibm.com> Tested-by: Linh Pham <phaml@us.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
snd_microii_spdif_default_get() invokes snd_usb_lock_shutdown(), which
increases the refcount of the snd_usb_audio object "chip".
When snd_microii_spdif_default_get() returns, local variable "chip"
becomes invalid, so the refcount should be decreased to keep refcount
balanced.
The reference counting issue happens in several exception handling paths
of snd_microii_spdif_default_get(). When those error scenarios occur
such as usb_ifnum_to_if() returns NULL, the function forgets to decrease
the refcnt increased by snd_usb_lock_shutdown(), causing a refcnt leak.
Fix this issue by jumping to "end" label when those error scenarios
occur.
Fixes: 447d6275f0c2 ("ALSA: usb-audio: Add sanity checks for endpoint accesses") Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1587617711-13200-1-git-send-email-xiyuyang19@fudan.edu.cn Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The error handling code in usX2Y_rate_set() may hit a potential NULL
dereference when an error occurs before allocating all us->urb[].
Add a proper NULL check for fixing the corner case.
Reported-by: Lin Yi <teroincn@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200420075529.27203-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit 7ed1c1901fe5 ("tools: fix cross-compile var clobbering") moved
the setup of the CC variable to tools/scripts/Makefile.include to make
the behavior consistent across all the tools Makefiles.
As the vm tools missed the include we end up with the wrong CC in a
cross-compiling evironment.
Fixes: 7ed1c1901fe5 (tools: fix cross-compile var clobbering) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Martin Kelly <martin@martingkelly.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200416104748.25243-1-l.stach@pengutronix.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
find_mergeable_vma() can return NULL. In this case, it leads to a crash
when we access vm_mm(its offset is 0x40) later in write_protect_page.
And this case did happen on our server. The following call trace is
captured in kernel 4.19 with the following patch applied and KSM zero
page enabled on our server.
commit e86c59b1b12d ("mm/ksm: improve deduplication of zero pages with colouring")
[songmuchun@bytedance.com: if the vma is out of date, just exit] Link: http://lkml.kernel.org/r/20200416025034.29780-1-songmuchun@bytedance.com
[akpm@linux-foundation.org: add the conventional braces, replace /** with /*] Fixes: e86c59b1b12d ("mm/ksm: improve deduplication of zero pages with colouring") Co-developed-by: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Hugh Dickins <hughd@google.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Cc: Markus Elfring <Markus.Elfring@web.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200416025034.29780-1-songmuchun@bytedance.com Link: http://lkml.kernel.org/r/20200414132905.83819-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
For 1G hugepages, huge_pte_offset() wants to return NULL or pudp, but it
may return a wrong 'pmdp' if there is a race. Please look at the
following code snippet:
...
pud = pud_offset(p4d, addr);
if (sz != PUD_SIZE && pud_none(*pud))
return NULL;
/* hugepage or swap? */
if (pud_huge(*pud) || !pud_present(*pud))
return (pte_t *)pud;
pmd = pmd_offset(pud, addr);
if (sz != PMD_SIZE && pmd_none(*pmd))
return NULL;
/* hugepage or swap? */
if (pmd_huge(*pmd) || !pmd_present(*pmd))
return (pte_t *)pmd;
...
The following sequence would trigger this bug:
- CPU0: sz = PUD_SIZE and *pud = 0 , continue
- CPU0: "pud_huge(*pud)" is false
- CPU1: calling hugetlb_no_page and set *pud to xxxx8e7(PRESENT)
- CPU0: "!pud_present(*pud)" is false, continue
- CPU0: pmd = pmd_offset(pud, addr) and maybe return a wrong pmdp
However, we want CPU0 to return NULL or pudp in this case.
We must make sure there is exactly one dereference of pud and pmd.
Signed-off-by: Longpeng <longpeng2@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200413010342.771-1-longpeng2@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
remap_vmalloc_range() has had various issues with the bounds checks it
promises to perform ("This function checks that addr is a valid
vmalloc'ed area, and that it is big enough to cover the vma") over time,
e.g.:
- not detecting pgoff<<PAGE_SHIFT overflow
- not detecting (pgoff<<PAGE_SHIFT)+usize overflow
- not checking whether addr and addr+(pgoff<<PAGE_SHIFT) are the same
vmalloc allocation
- comparing a potentially wildly out-of-bounds pointer with the end of
the vmalloc region
In particular, since commit fc9702273e2e ("bpf: Add mmap() support for
BPF_MAP_TYPE_ARRAY"), unprivileged users can cause kernel null pointer
dereferences by calling mmap() on a BPF map with a size that is bigger
than the distance from the start of the BPF map to the end of the
address space.
This could theoretically be used as a kernel ASLR bypass, by using
whether mmap() with a given offset oopses or returns an error code to
perform a binary search over the possible address range.
To allow remap_vmalloc_range_partial() to verify that addr and
addr+(pgoff<<PAGE_SHIFT) are in the same vmalloc region, pass the offset
to remap_vmalloc_range_partial() instead of adding it to the pointer in
remap_vmalloc_range().
In remap_vmalloc_range_partial(), fix the check against
get_vm_area_size() by using size comparisons instead of pointer
comparisons, and add checks for pgoff.
Fixes: 833423143c3a ("[PATCH] mm: introduce remap_vmalloc_range()") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@chromium.org> Link: http://lkml.kernel.org/r/20200415222312.236431-1-jannh@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit 8099f58f1ecd ("USB: hub: Don't record a connect-change event
during reset-resume") wasn't very well conceived. The problem it
tried to fix was that if a connect-change event occurred while the
system was asleep (such as a device disconnecting itself from the bus
when it is suspended and then reconnecting when it resumes)
requiring a reset-resume during the system wakeup transition, the hub
port's change_bit entry would remain set afterward. This would cause
the hub driver to believe another connect-change event had occurred
after the reset-resume, which was wrong and would lead the driver to
send unnecessary requests to the device (which could interfere with a
firmware update).
The commit tried to fix this by not setting the change_bit during the
wakeup. But this was the wrong thing to do; it means that when a
device is unplugged while the system is asleep, the hub driver doesn't
realize anything has happened: The change_bit flag which would tell it
to handle the disconnect event is clear.
The commit needs to be reverted and the problem fixed in a different
way. Fortunately an alternative solution was noted in the commit's
Changelog: We can continue to set the change_bit entry in
hub_activate() but then clear it when a reset-resume occurs. That way
the the hub driver will see the change_bit when a device is
disconnected but won't see it when the device is still present.
That's what this patch does.
Reported-and-tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: 8099f58f1ecd ("USB: hub: Don't record a connect-change event during reset-resume") Tested-by: Paul Zimmerman <pauldzim@gmail.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2004221602480.11262-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
FuzzUSB (a variant of syzkaller) found a free-while-still-in-use bug
in the USB scatter-gather library:
BUG: KASAN: use-after-free in atomic_read
include/asm-generic/atomic-instrumented.h:26 [inline]
BUG: KASAN: use-after-free in usb_hcd_unlink_urb+0x5f/0x170
drivers/usb/core/hcd.c:1607
Read of size 4 at addr ffff888065379610 by task kworker/u4:1/27
This bug occurs when cancellation of the S-G transfer races with
transfer completion. When that happens, usb_sg_cancel() may continue
to access the transfer's URBs after usb_sg_wait() has freed them.
The bug is caused by the fact that usb_sg_cancel() does not take any
sort of reference to the transfer, and so there is nothing to prevent
the URBs from being deallocated while the routine is trying to use
them. The fix is to take such a reference by incrementing the
transfer's io->count field while the cancellation is in progres and
decrementing it afterward. The transfer's URBs are not deallocated
until io->complete is triggered, which happens when io->count reaches
zero.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Kyungtae Kim <kt0755@gmail.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2003281615140.14837-100000@netrider.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This fixes a bug that causes the USB3 early console to freeze after
printing a single line on AMD machines because it can't parse the
Transfer TRB properly.
The spec at
https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf
says in section "4.5.1 Device Context Index" that the Context Index,
also known as Endpoint ID according to
section "1.6 Terms and Abbreviations", is normally computed as
`DCI = (Endpoint Number * 2) + Direction`, which matches the current
definitions of XDBC_EPID_OUT and XDBC_EPID_IN.
However, the numbering in a Debug Capability Context data structure is
supposed to be different:
Section "7.6.3.2 Endpoint Contexts and Transfer Rings" explains that a
Debug Capability Context data structure has the endpoints mapped to indices
0 and 1.
Change XDBC_EPID_OUT/XDBC_EPID_IN to the spec-compliant values, add
XDBC_EPID_OUT_INTEL/XDBC_EPID_IN_INTEL with Intel's incorrect values, and
let xdbc_handle_tx_event() handle both.
I have verified that with this patch applied, the USB3 early console works
on both an Intel and an AMD machine.
Fixes: aeb9dd1de98c ("usb/early: Add driver for xhci debug capability") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20200401074619.8024-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The Corsair K70 RGB RAPIDFIRE needs the USB_QUIRK_DELAY_INIT and
USB_QUIRK_DELAY_CTRL_MSG to function or it will randomly not
respond on boot, just like other Corsair keyboards
Signed-off-by: Jonathan Cox <jonathan@jdcox.net> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200410212427.2886-1-jonathan@jdcox.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Change a bunch of arguments of wrapper functions which pass signed
integer to an unsigned integer which might cause undefined behaviors
when sign integer overflow.
BugLink: https://bugs.launchpad.net/bugs/1877461
A race condition between threads updating mountpoint reference counter
affects longterm releases 4.4.220, 4.9.220, 4.14.177 and 4.19.118.
The mountpoint reference counter corruption may occur when:
* one thread increments m_count member of struct mountpoint
[under namespace_sem, but not holding mount_lock]
pivot_root()
* another thread simultaneously decrements the same m_count
[under mount_lock, but not holding namespace_sem]
put_mountpoint()
unhash_mnt()
umount_mnt()
mntput_no_expire()
To fix this race condition, grab mount_lock before updating m_count in
pivot_root().
Reference: CVE-2020-12114 Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Piotr Krysiuk <piotras@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The XADC has two internal ADCs. Depending on the mode it is operating in
either one or both of them are used. The device manual calls this
continuous (one ADC) and simultaneous (both ADCs) mode.
The meaning of the sequencing register for the aux channels changes
depending on the mode.
In continuous mode each bit corresponds to one of the 16 aux channels. And
the single ADC will convert them one by one in order.
In simultaneous mode the aux channels are split into two groups the first 8
channels are assigned to the first ADC and the other 8 channels to the
second ADC. The upper 8 bits of the sequencing register are unused and the
lower 8 bits control both ADCs. This means a bit needs to be set if either
the corresponding channel from the first group or the second group (or
both) are set.
Currently the driver does not have the special handling required for
simultaneous mode. Add it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When enabling the trigger and unmasking the end-of-sequence (EOS) interrupt
the EOS interrupt should be cleared from the status register. Otherwise it
is possible that it was still set from a previous capture. If that is the
case the interrupt would fire immediately even though no conversion has
been done yet and stale data is being read from the device.
The old code only clears the interrupt if the interrupt was previously
unmasked. Which does not make much sense since the interrupt is always
masked at this point and in addition masking the interrupt does not clear
the interrupt from the status register. So the clearing needs to be done
unconditionally.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The check for shutting down the second ADC is inverted. This causes it to
be powered down when it should be enabled. As a result channels that are
supposed to be handled by the second ADC return invalid conversion results.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The commit 3c6fd1f07ed0 ("ALSA: hda: Add driver blacklist") added a
new blacklist for the devices that are known to have empty codecs, and
one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f).
However, it turned out that the very same PCI SSID is used for the
previous model that does have the valid HD-audio codecs and the change
broke the sound on it.
This patch reverts the corresponding entry as a temporary solution.
Although Zenith II and co will see get the empty HD-audio bus again,
it'd be merely resource wastes and won't affect the functionality,
so it's no end of the world. We'll need to address this later,
e.g. by either switching to DMI string matching or using PCI ID &
SSID pairs.
By allocating a kernel buffer with a user-supplied buffer length, it
is possible that a false positive ENOMEM error may be returned because
the user-supplied length is just too large even if the system do have
enough memory to hold the actual key data.
Moreover, if the buffer length is larger than the maximum amount of
memory that can be returned by kmalloc() (2^(MAX_ORDER-1) number of
pages), a warning message will also be printed.
To reduce this possibility, we set a threshold (PAGE_SIZE) over which we
do check the actual key length first before allocating a buffer of the
right size to hold it. The threshold is arbitrary, it is just used to
trigger a buffer length check. It does not limit the actual key length
as long as there is enough memory to satisfy the memory request.
To further avoid large buffer allocation failure due to page
fragmentation, kvmalloc() is used to allocate the buffer so that vmapped
pages can be used when there is not a large enough contiguous set of
pages available for allocation.
In the extremely unlikely scenario that the key keeps on being changed
and made longer (still <= buflen) in between 2 __keyctl_read_key()
calls, the __keyctl_read_key() calling loop in keyctl_read_key() may
have to be iterated a large number of times, but definitely not infinite.
Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
To avoid a loop with qdiscs and xfrms, check if the skb has already gone
through the qdisc attached to the VRF device and then to the xfrm layer.
If so, no need for a second redirect.
Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Reported-by: Trev Larock <trev@larock.ca> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
IPSKB_XFRM_TRANSFORMED and IP6SKB_XFRM_TRANSFORMED are skb flags set by
xfrm code to tell other skb handlers that the packet has been passed
through the xfrm output functions. Simplify the code and just always
set them rather than conditionally based on netfilter enabled thus
making the flag available for other users.
Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The ARL {MAC,VID} tuple and the forward entry were off by 0x10 bytes,
which means that when we read/wrote from/to ARL bin index 0, we were
actually accessing the ARLA_RWCTRL register.
Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When team mode is changed or set, the team_mode_get() is called to check
whether the mode module is inserted or not. If the mode module is not
inserted, it calls the request_module().
In the request_module(), it creates a child process, which is
the "modprobe" process and waits for the done of the child process.
At this point, the following locks were used.
down_read(&cb_lock()); by genl_rcv()
genl_lock(); by genl_rcv_msc()
rtnl_lock(); by team_nl_cmd_options_set()
mutex_lock(&team->lock); by team_nl_team_get()
Concurrently, the team module could be removed by rmmod or "modprobe -r"
The __exit function of team module is team_module_exit(), which calls
team_nl_fini() and it tries to acquire following locks.
down_write(&cb_lock);
genl_lock();
Because of the genl_lock() and cb_lock, this process can't be finished
earlier than request_module() routine.
The problem secenario.
CPU0 CPU1
team_mode_get
request_module()
modprobe -r team_mode_roundrobin
team <--(B)
modprobe team <--(A)
team_mode_roundrobin
By request_module(), the "modprobe team_mode_roundrobin" command
will be executed. At this point, the modprobe process will decide
that the team module should be inserted before team_mode_roundrobin.
Because the team module is being removed.
By the module infrastructure, the same module insert/remove operations
can't be executed concurrently.
So, (A) waits for (B) but (B) also waits for (A) because of locks.
So that the hang occurs at this point.
Test commands:
while :
do
teamd -d &
killall teamd &
modprobe -rv team_mode_roundrobin &
done
The approach of this patch is to hold the reference count of the team
module if the team module is compiled as a module. If the reference count
of the team module is not zero while request_module() is being called,
the team module will not be removed at that moment.
So that the above scenario could not occur.
Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
x25_lapb_receive_frame() invokes x25_get_neigh(), which returns a
reference of the specified x25_neigh object to "nb" with increased
refcnt.
When x25_lapb_receive_frame() returns, local variable "nb" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one path of
x25_lapb_receive_frame(). When pskb_may_pull() returns false, the
function forgets to decrease the refcnt increased by x25_get_neigh(),
causing a refcnt leak.
Fix this issue by calling x25_neigh_put() when pskb_may_pull() returns
false.
Fixes: cb101ed2c3c7 ("x25: Handle undersized/fragmented skbs") Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
nr_add_node() invokes nr_neigh_get_dev(), which returns a local
reference of the nr_neigh object to "nr_neigh" with increased refcnt.
When nr_add_node() returns, "nr_neigh" becomes invalid, so the refcount
should be decreased to keep refcount balanced.
The issue happens in one normal path of nr_add_node(), which forgets to
decrease the refcnt increased by nr_neigh_get_dev() and causes a refcnt
leak. It should decrease the refcnt before the function returns like
other normal paths do.
Fix this issue by calling nr_neigh_put() before the nr_add_node()
returns.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
In the macvlan_device_event(), the list_first_entry_or_null() is used.
This function could return null pointer if there is no node.
But, the macvlan module doesn't check the null pointer.
So, null-ptr-deref would occur.
The problem scenario.
If dummy1 is removed,
1. ->dellink() of dummy1 is called.
2. NETDEV_UNREGISTER of dummy1 notification is sent to macvlan module.
3. ->dellink() of macvlan1 is called.
4. NETDEV_UNREGISTER of macvlan1 notification is sent to bond module.
5. __bond_release_one() is called and it internally calls
dev_set_mac_address().
6. dev_set_mac_address() calls the ->ndo_set_mac_address() of macvlan1,
which is macvlan_set_mac_address().
7. macvlan_set_mac_address() calls the dev_set_mac_address() with dummy1.
8. NETDEV_CHANGEADDR of dummy1 is sent to macvlan module.
9. In the macvlan_device_event(), it calls list_first_entry_or_null().
At this point, dummy1 and macvlan1 were removed.
So, list_first_entry_or_null() will return NULL.
Test commands:
ip netns add nst
ip netns exec nst ip link add bond0 type bond
for i in {0..10}
do
ip netns exec nst ip link add dummy$i type dummy
ip netns exec nst ip link add macvlan$i link dummy$i \
type macvlan mode passthru
ip netns exec nst ip link set macvlan$i master bond0
done
ip netns del nst
Fixes: e289fd28176b ("macvlan: fix the problem when mac address changes for passthru mode") Reported-by: syzbot+5035b1f9dc7ea4558d5a@syzkaller.appspotmail.com Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When a macsec interface is created, the mtu is calculated with the lower
interface's mtu value.
If the mtu of lower interface is lower than the length, which is needed
by macsec interface, macsec's mtu value will be overflowed.
So, if the lower interface's mtu is too low, macsec interface's mtu
should be set to 0.
Test commands:
ip link add dummy0 mtu 10 type dummy
ip link add macsec0 link dummy0 type macsec
ip link show macsec0
Before:
11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 4294967274
After:
11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 0
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit b6f6118901d1 ("ipv6: restrict IPV6_ADDRFORM operation") fixed a
problem found by syzbot an unfortunate logic error meant that it
also broke IPV6_ADDRFORM.
Rearrange the checks so that the earlier test is just one of the series
of checks made before moving the socket from IPv6 to IPv4.
Fixes: b6f6118901d1 ("ipv6: restrict IPV6_ADDRFORM operation") Signed-off-by: John Haxby <john.haxby@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Fetching PTP sync information from mailbox is slow and can take
up to 10 milliseconds. Reduce this unnecessary delay by directly
reading the information from the corresponding registers.
Fixes: 9c33e4208bce ("cxgb4: Add PTP Hardware Clock (PHC) support") Signed-off-by: Manoj Malviya <manojmalviya@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
In SLUB, prefetch_freepointer() is used when allocating an object from
cache's freelist, to make sure the next object in the list is cache-hot,
since it's probable it will be allocated soon.
Commit 2482ddec670f ("mm: add SLUB free list pointer obfuscation") has
unintentionally changed the prefetch in a way where the prefetch is
turned to a real fetch, and only the next->next pointer is prefetched.
In case there is not a stream of allocations that would benefit from
prefetching, the extra real fetch might add a useless cache miss to the
allocation. Restore the previous behavior.
Link: http://lkml.kernel.org/r/20180809085245.22448-1-vbabka@suse.cz Fixes: 2482ddec670f ("mm: add SLUB free list pointer obfuscation") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Kees Cook <keescook@chromium.org> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Previously Clock PM could not be re-enabled after being disabled by
pci_disable_link_state() because clkpm_capable was reset. Change this by
adding a clkpm_disable field similar to aspm_disable.
The newer 2711 and 7211 chips have two PWM controllers and failure to
dynamically allocate the PWM base would prevent the second PWM
controller instance being probed for succeeding with an -EEXIST error
from alloc_pwms().
Runtime PM should be enabled before calling pwmchip_add(), as PWM users
can appear immediately after the PWM chip has been added.
Likewise, Runtime PM should always be disabled after the removal of the
PWM chip, even if the latter failed.
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The io_subchannel driver will do so when the associated
ccw_device has been registered -- but unconditionally, so more
ADD uevents will be generated if a subchannel has been unbound
from the io_subchannel driver and later rebound.
To fix this, only generate the ADD event if uevents were still
suppressed for the device.
Fixes: fa1a8c23eb7d ("s390: cio: Delay uevents for subchannels")
Message-Id: <20200327124503.9794-2-cohuck@redhat.com> Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal. Fix it by stripping the leading zeroes.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: NeilBrown <neilb@suse.com> Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
If the daemon is restarted or crashes while logging out of a session, the
unbind session event sent by the kernel is not processed and is lost. When
the daemon starts again, the session can't be unbound because the daemon is
waiting for the event message. However, the kernel has already logged out
and the event will not be resent.
When iscsid restart is complete, logout session reports error:
Logging out of session [sid: 6, target: iqn.xxxxx, portal: xx.xx.xx.xx,3260]
iscsiadm: Could not logout of [sid: 6, target: iscsiadm -m node iqn.xxxxx, portal: xx.xx.xx.xx,3260].
iscsiadm: initiator reported error (9 - internal error)
iscsiadm: Could not logout of all requested sessions
Make sure the unbind event is emitted.
[mkp: commit desc and applied by hand since patch was mangled]
Link: https://lore.kernel.org/r/4eab1771-2cb3-8e79-b31c-923652340e99@huawei.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Wu Bo <wubo40@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Runtime PM should be enabled before calling pwmchip_add(), as PWM users
can appear immediately after the PWM chip has been added.
Likewise, Runtime PM should be disabled after the removal of the PWM
chip.
Fixes: ed6c1476bf7f16d5 ("pwm: Add support for R-Car PWM Timer") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
1. try_get_cap_refs() fails to get caps and finds that mds_wanted
does not include what it wants. It returns -ESTALE.
2. ceph_get_caps() calls ceph_renew_caps(). ceph_renew_caps() finds
that inode has cap, so it calls ceph_check_caps().
3. ceph_check_caps() finds that issued caps (without checking if it's
stale) already includes caps wanted by open file, so it skips
updating wanted caps.
Above events can cause an infinite loop inside ceph_get_caps().
Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Return the error returned by ceph_mdsc_do_request(). Otherwise,
r_target_inode ends up being NULL this ends up returning ENOENT
regardless of the error.
Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BUG: KASAN: slab-out-of-bounds in lpfc_unreg_login+0x7c/0xc0 [lpfc]
Read of size 2 at addr ffff889fc7c50a22 by task lpfc_worker_3/6676
...
Call Trace:
dump_stack+0x96/0xe0
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
print_address_description.constprop.6+0x1b/0x220
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
__kasan_report.cold.9+0x37/0x7c
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
kasan_report+0xe/0x20
lpfc_unreg_login+0x7c/0xc0 [lpfc]
lpfc_sli_def_mbox_cmpl+0x334/0x430 [lpfc]
...
When processing the completion of a "Reg Rpi" login mailbox command in
lpfc_sli_def_mbox_cmpl, a call may be made to lpfc_unreg_login. The vpi is
extracted from the completing mailbox context and passed as an input for
the next. However, the vpi stored in the mailbox command context is an
absolute vpi, which for SLI4 represents both base + offset. When used with
a non-zero base component, (function id > 0) this results in an
out-of-range access beyond the allocated phba->vpi_ids array.
Fix by subtracting the function's base value to get an accurate vpi number.
Link: https://lore.kernel.org/r/20200322181304.37655-2-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Currently the watchdog core does not initialize the last_hw_keepalive
time during watchdog startup. This will cause the watchdog to be pinged
immediately if enough time has passed from the system boot-up time, and
some types of watchdogs like K3 RTI does not like this.
To avoid the issue, setup the last_hw_keepalive time during watchdog
startup.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200302200426.6492-3-t-kristo@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Removed info log-message if ipip tunnel registration fails during
module-initialization: it adds nothing to the error message that is
written on all failures.
Fixes: dd9ee3444014e ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel") Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
drivers/crypto/mxs-dcp.c:39:15: warning:
symbol 'sha1_null_hash' was not declared. Should it be static?
drivers/crypto/mxs-dcp.c:43:15: warning:
symbol 'sha256_null_hash' was not declared. Should it be static?
Fixes: c709eebaf5c5 ("crypto: mxs-dcp - Fix SHA null hashes and output length") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Extents are cached in read_extent_tree_block(); as a result, extents
are not cached for inodes with depth == 0 when we try to find the
extent using ext4_find_extent(). The result of the lookup is cached
in ext4_map_blocks() but is only a subset of the extent on disk. As a
result, the contents of extents status cache can get very badly
fragmented for certain workloads, such as a random 4k read workload.
File size of /mnt/test is 33554432 (8192 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 8191: 40960.. 49151: 8192: last,eof
$ perf record -e 'ext4:ext4_es_*' /root/bin/fio --name=t --direct=0 --rw=randread --bs=4k --filesize=32M --size=32M --filename=/mnt/test
$ perf script | grep ext4_es_insert_extent | head -n 10
fio 131 [000] 13.975421: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [494/1) mapped 41454 status W
fio 131 [000] 13.975939: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6064/1) mapped 47024 status W
fio 131 [000] 13.976467: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6907/1) mapped 47867 status W
fio 131 [000] 13.976937: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3850/1) mapped 44810 status W
fio 131 [000] 13.977440: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3292/1) mapped 44252 status W
fio 131 [000] 13.977931: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6882/1) mapped 47842 status W
fio 131 [000] 13.978376: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3117/1) mapped 44077 status W
fio 131 [000] 13.978957: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [2896/1) mapped 43856 status W
fio 131 [000] 13.979474: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [7479/1) mapped 48439 status W
Fix this by caching the extents for inodes with depth == 0 in
ext4_find_extent().
[ Renamed ext4_es_cache_extents() to ext4_cache_extents() since this
newly added function is not in extents_cache.c, and to avoid
potential visual confusion with ext4_es_cache_extent(). -TYT ]
Passing fsdata parameter to .write_{begin,end} in f2fs_quota_write(),
so that if quota file is compressed one, we can avoid above NULL
pointer dereference when updating quota content.
Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When perf record -e SF_CYCLES_BASIC_DIAG runs with very high
frequency, the samples arrive faster than the perf process can
save them to file. Eventually, for longer running processes, this
leads to the siutation where the trace buffers allocated by perf
slowly fills up. At one point the auxiliary trace buffer is full
and the CPU Measurement sampling facility is turned off. Furthermore
a warning is printed to the kernel log buffer:
cpum_sf: The AUX buffer with 0 pages for the diagnostic-sampling
mode is full
The number of allocated pages for the auxiliary trace buffer is shown
as zero pages. That is wrong.
Fix this by saving the number of allocated pages before entering the
work loop in the interrupt handler. When the interrupt handler processes
the samples, it may detect the buffer full condition and stop sampling,
reducing the buffer size to zero.
Print the correct value in the error message:
cpum_sf: The AUX buffer with 256 pages for the diagnostic-sampling
mode is full
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 4 of 5.
target_path was not freed in the non-error path.
Fixes: e0a58f3e08d4 ("of: overlay: remove a dependency on device node full_name") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 1 of 5.
of_unittest_changeset() reaches deeply into the dynamic devicetree
functions. Several nodes were left with an elevated reference
count and thus were not properly cleaned up. Fix the reference
counts so that the memory will be freed.
Fixes: 201c910bd689 ("of: Transactional DT support.") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
In order to wake from suspend by ethernet magic packets the GPC
must be used as intc does not have wakeup functionality.
But the FEC DT node currently uses interrupt-extended,
specificying intc, thus breaking WoL.
This problem is probably fallout from the stacked domain conversion
as intc used to chain to GPC.
So replace "interrupts-extended" by "interrupts" to use the default
parent which is GPC.
Fixes: b923ff6af0d5 ("ARM: imx6: convert GPC to stacked domains") Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Reset file is not used and may cause race conditions
with operational driver if used.
Signed-off-by: Karthick Gopalasubramanian <kargop@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
HALP ICR is set as long as the FW should stay awake.
To prevent its multiple handling the driver masks this IRQ bit.
However, if there is a different MISC ICR before the driver clears
this bit, there is a risk of race condition between HALP mask and
unmask. This race leads to HALP timeout, in case it is mistakenly
masked.
Add an atomic flag to indicate if HALP ICR should be handled.
Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
One way to prevent this deadlock scenario from happening is to not
allow writing to userspace while holding the key semaphore. Instead,
an internal buffer is allocated for getting the keys out from the
read method first before copying them out to userspace without holding
the lock.
That requires taking out the __user modifier from all the relevant
read methods as well as additional changes to not use any userspace
write helpers. That is,
1) The put_user() call is replaced by a direct copy.
2) The copy_to_user() call is replaced by memcpy().
3) All the fault handling code is removed.
Compiling on a x86-64 system, the size of the rxrpc_read() function is
reduced from 3795 bytes to 2384 bytes with this patch.
Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
kmalloc() can't always allocate large enough buffers for big_key to use for
crypto (1MB + some metadata) so we cannot use that to allocate the buffer.
Further, vmalloc'd pages can't be passed to sg_init_one() and the aead
crypto accessors cannot be called progressively and must be passed all the
data in one go (which means we can't pass the data in one block at a time).
Fix this by allocating the buffer pages individually and passing them
through a multientry scatterlist to the crypto layer. This has the bonus
advantage that we don't have to allocate a contiguous series of pages.
We then vmap() the page list and pass that through to the VFS read/write
routines.
from the keyctl/padd/useradd test of the keyutils testsuite on s390x.
Note that it might be better to shovel data through in page-sized lumps
instead as there's no particular need to use a monolithic buffer unless the
kernel itself wants to access the data.
Fixes: 13100a72f40f ("Security: Keys: Big keys stored encrypted") Reported-by: Paul Bunyan <pbunyan@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com>
cc: Kirill Marinushkin <k.marinushkin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The variable 'name' is released multiple times in the error path,
which may cause double free issues.
This problem is avoided by adding a goto label to release the memory
uniformly. And this change also makes the code a bit more cleaner.
Fixes: 4f678a58d335 ("mtd: fix memory leaks in phram_setup") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Cc: Joern Engel <joern@lazybastard.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200318153156.25612-1-wenyang@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This function is only called from lpddr_probe(). We free "lpddr" both
here and in the caller, so it's a double free. The best place to free
"lpddr" is in lpddr_probe() so let's delete this one.
Fixes: 8dc004395d5e ("[MTD] LPDDR qinfo probing.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200228092554.o57igp3nqhyvf66t@kili.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The __torture_print_stats() function in locktorture.c carefully
initializes local variable "min" to statp[0].n_lock_acquired, but
then compares it to statp[i].n_lock_fail. Given that the .n_lock_fail
field should normally be zero, and given the initialization, it seems
reasonable to display the maximum and minimum number acquisitions
instead of miscomputing the maximum and minimum number of failures.
This commit therefore switches from failures to acquisitions.
And this turns out to be not only a day-zero bug, but entirely my
own fault. I hate it when that happens!
Fixes: 0af3fe1efa53 ("locktorture: Add a lock-torture kernel module") Reported-by: Will Deacon <will@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
ev_byte_channel_send() assumes that its third argument is a 16 byte
array. Some places where it is called it may not be (or we can't
easily tell if it is). Newer compilers have started producing warnings
about this, so make sure we actually pass a 16 byte array.
There may be more elegant solutions to this, but the driver is quite
old and hasn't been updated in many years.
The warnings (from a powerpc allyesconfig build) are:
In file included from include/linux/byteorder/big_endian.h:5,
from arch/powerpc/include/uapi/asm/byteorder.h:14,
from include/asm-generic/bitops/le.h:6,
from arch/powerpc/include/asm/bitops.h:250,
from include/linux/bitops.h:29,
from include/linux/kernel.h:12,
from include/asm-generic/bug.h:19,
from arch/powerpc/include/asm/bug.h:109,
from include/linux/bug.h:5,
from include/linux/mmdebug.h:5,
from include/linux/gfp.h:5,
from include/linux/slab.h:15,
from drivers/tty/ehv_bytechan.c:24:
drivers/tty/ehv_bytechan.c: In function ‘ehv_bc_udbg_putc’:
arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of ‘const char[1]’ [-Warray-bounds]
298 | r6 = be32_to_cpu(p[1]);
include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro ‘__be32_to_cpu’
40 | #define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
| ^
arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro ‘be32_to_cpu’
298 | r6 = be32_to_cpu(p[1]);
| ^~~~~~~~~~~
drivers/tty/ehv_bytechan.c:166:13: note: while referencing ‘data’
166 | static void ehv_bc_udbg_putc(char c)
| ^~~~~~~~~~~~~~~~
Fixes: dcd83aaff1c8 ("tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
[mpe: Trim warnings from change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200109183912.5fcb52aa@canb.auug.org.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The "fix" struct has a 2 byte hole after ->ywrapstep and the
"fix = info->fix;" assignment doesn't necessarily clear it. It depends
on the compiler. The solution is just to replace the assignment with an
memcpy().
Fixes: 1f5e31d7e55a ("fbmem: don't call copy_from/to_user() with mutex held") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andrea Righi <righi.andrea@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Peter Rosin <peda@axentia.se> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200113100132.ixpaymordi24n3av@kili.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit f949a12fd697 ("net: dsa: bcm_sf2: fix buffer overflow doing
set_rxnfc") tried to fix the some user controlled buffer overflows in
bcm_sf2_cfp_rule_set() and bcm_sf2_cfp_rule_del() but the fix was using
CFP_NUM_RULES, which while it is correct not to overflow the bitmaps, is
not representative of what the device actually supports. Correct that by
using bcm_sf2_cfp_rule_size() instead.
The latter subtracts the number of rules by 1, so change the checks from
greater than or equal to greater than accordingly.
Fixes: f949a12fd697 ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The SPA of the GCR3 table root pointer[51:31] masks 20 bits. However,
this requires 21 bits (Please see the AMD IOMMU specification).
This leads to the potential failure when the bit 51 of SPA of
the GCR3 table root pointer is 1'.
Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Fixes: 52815b75682e2 ("iommu/amd: Add support for IOMMUv2 domain mode") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The "cmd" comes from the user and it can be up to 255. It it's more
than the number of bits in long, it results out of bounds read when we
check test_bit(cmd, &cmd_mask). The highest valid value for "cmd" is
ND_CMD_CALL (10) so I added a compare against that.
Fixes: 62232e45f4a2 ("libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200225162055.amtosfy7m35aivxg@kili.mountain Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When building without extra debugging, (and with another patch that uses
no_printk() instead of <empty> for the ext2-xattr debug-print macros,
this build error happens:
../fs/ext2/xattr.c: In function ‘ext2_xattr_cache_insert’:
../fs/ext2/xattr.c:869:18: error: ‘ext2_xattr_cache’ undeclared (first use in
this function); did you mean ‘ext2_xattr_list’?
atomic_read(&ext2_xattr_cache->c_entry_count));
Fix the problem by removing cached entry count from the debug message
since otherwise we'd have to export the mbcache structure just for that.
Fixes: be0726d33cb8 ("ext2: convert to mbcache2") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When EXT2_ATTR_DEBUG is not defined, modify the 2 debug macros
to use the no_printk() macro instead of <nothing>.
This fixes gcc warnings when -Wextra is used:
../fs/ext2/xattr.c:252:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:258:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:330:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:872:45: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
I have verified that the only object code change (with gcc 7.5.0) is
the reversal of some instructions from 'cmp a,b' to 'cmp b,a'.
Link: https://lore.kernel.org/r/e18a7395-61fb-2093-18e8-ed4f8cf56248@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jan Kara <jack@suse.com> Cc: linux-ext4@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Move canonical address check before mmget_not_zero() to avoid mm
reference leak.
Fixes: 9d8c3af31607 ("iommu/vt-d: IOMMU Page Request needs to check if address is canonical.") Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Originally, it kfrees the wrong pointer for mem_obj.
It would cause memory leak under stress test.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
We have to properly retry again by returning -EINVAL immediately in case
somebody else instantiated the table concurrently. We missed to add the
goto in this function only. The code now matches the other, similar
shadowing functions.
We are overwriting an existing region 2 table entry. All allocated pages
are added to the crst_list to be freed later, so they are not lost
forever. However, when unshadowing the region 2 table, we wouldn't trigger
unshadowing of the original shadowed region 3 table that we replaced. It
would get unshadowed when the original region 3 table is modified. As it's
not connected to the page table hierarchy anymore, it's not going to get
used anymore. However, for a limited time, this page table will stick
around, so it's in some sense a temporary memory leak.
Identified by manual code inspection. I don't think this classifies as
stable material.
Fixes: 998f637cc4b9 ("s390/mm: avoid races on region/segment/page table shadowing") Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200403153050.20569-4-david@redhat.com Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
compiletime_assert() uses __LINE__ to create a unique function name. This
means that if you have more than one BUILD_BUG_ON() in the same source
line (which can happen if they appear e.g. in a macro), then the error
message from the compiler might output the wrong condition.
./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_9' declared with attribute error: BUILD_BUG_ON failed: 0
_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
However, it was not the BUILD_BUG_ON(0) that failed, so it should say 1
instead of 0. With this patch, we use __COUNTER__ instead of __LINE__, so
each BUILD_BUG_ON() gets a different function name and the correct
condition is printed:
./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_0' declared with attribute error: BUILD_BUG_ON failed: 1
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Daniel Santos <daniel.santos@pobox.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200331112637.25047-1-vegard.nossum@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
"vm_committed_as.count" could be accessed concurrently as reported by
KCSAN,
BUG: KCSAN: data-race in __vm_enough_memory / percpu_counter_add_batch
write to 0xffffffff9451c538 of 8 bytes by task 65879 on cpu 35:
percpu_counter_add_batch+0x83/0xd0
percpu_counter_add_batch at lib/percpu_counter.c:91
__vm_enough_memory+0xb9/0x260
dup_mm+0x3a4/0x8f0
copy_process+0x2458/0x3240
_do_fork+0xaa/0x9f0
__do_sys_clone+0x125/0x160
__x64_sys_clone+0x70/0x90
do_syscall_64+0x91/0xb05
entry_SYSCALL_64_after_hwframe+0x49/0xbe
read to 0xffffffff9451c538 of 8 bytes by task 66773 on cpu 19:
__vm_enough_memory+0x199/0x260
percpu_counter_read_positive at include/linux/percpu_counter.h:81
(inlined by) __vm_enough_memory at mm/util.c:839
mmap_region+0x1b2/0xa10
do_mmap+0x45c/0x700
vm_mmap_pgoff+0xc0/0x130
ksys_mmap_pgoff+0x6e/0x300
__x64_sys_mmap+0x33/0x40
do_syscall_64+0x91/0xb05
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The read is outside percpu_counter::lock critical section which results in
a data race. Fix it by adding a READ_ONCE() in
percpu_counter_read_positive() which could also service as the existing
compiler memory barrier.
Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Marco Elver <elver@google.com> Link: http://lkml.kernel.org/r/1582302724-2804-1-git-send-email-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
If CONFIG_DEVICE_PRIVATE is defined, but neither CONFIG_MEMORY_FAILURE nor
CONFIG_MIGRATION, then non_swap_entry() will return 0, meaning that the
condition (non_swap_entry(entry) && is_device_private_entry(entry)) in
zap_pte_range() will never be true even if the entry is a device private
one.
Equally any other code depending on non_swap_entry() will not function as
expected.
I originally spotted this just by looking at the code, I haven't actually
observed any problems.
Looking a bit more closely it appears that actually this situation
(currently at least) cannot occur:
DEVICE_PRIVATE depends on ZONE_DEVICE
ZONE_DEVICE depends on MEMORY_HOTREMOVE
MEMORY_HOTREMOVE depends on MIGRATION
Fixes: 5042db43cc26 ("mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory") Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: John Hubbard <jhubbard@nvidia.com> Link: http://lkml.kernel.org/r/20200305130550.22693-1-steven.price@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Under some circumstances we may encounter a filesystem error on a
read-only block device, and if we try to save the error info to the
superblock and commit it, we'll wind up with a noisy error and
backtrace, i.e.:
[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
...
To avoid this, commit the error info in the superblock only if the
block device is writable.
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/4b6e774d-cc00-3469-7abb-108eb151071a@sandeen.net Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
machine_device_initcall expands to __define_machine_initcall, which in
turn has the macro machine_is used in it, which declares mach_##name
with an __attribute__((weak)). define_machine actually defines
mach_##name, which in this file happens before the declaration, hence
the warning.
To fix this, move define_machine after machine_device_initcall so that
the declaration occurs before the definition, which matches how
machine_device_initcall and define_machine work throughout
arch/powerpc.
While we're here, remove some spaces before tabs.
Fixes: 8f101a051ef0 ("edac: cpc925 MC platform device setup") Reported-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Ilie Halip <ilie.halip@gmail.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200323222729.15365-1-natechancellor@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When dreq is allocated by nfs_direct_req_alloc(), dreq->kref is
initialized to 2. Therefore we need to call nfs_direct_req_release()
twice to release the allocated dreq. Usually it is called in
nfs_file_direct_{read, write}() and nfs_direct_complete().
However, current code only calls nfs_direct_req_relese() once if
nfs_get_lock_context() fails in nfs_file_direct_{read, write}().
So, that case would result in memory leak.
Fix this by adding the missing call.
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Make sure to test the stateid for validity so that we catch instances
where the server may have been reusing stateids in
nfs_layout_find_inode_by_stateid().
Fixes: 7b410d9ce460 ("pNFS: Delay getting the layout header in CB_LAYOUTRECALL handlers") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The RTC IRQ is requested before the struct rtc_device is allocated,
this may lead to a NULL pointer dereference in the IRQ handler.
To fix this issue, allocating the rtc_device struct before requesting
the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device
to register the RTC device.
Also remove the unnecessary error message as the core already prints the
info.
Currently we wait only until the PGC inverts the isolation setting
before disabling the peripheral clocks. This doesn't ensure that the
reset is properly propagated through the peripheral devices in the
power domain.
Wait until the PGC signals that the power up request is done and
wait a bit for resets to propagate before disabling the clocks.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The driver fails to probe with -EPROBE_DEFER if battery's power supply
(charger driver) isn't ready yet and this results in a bit noisy error
message in KMSG during kernel's boot up. Let's silence the harmless
error message.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Pali Rohár <pali@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
clk_hw_round_rate() may call round rate function of its parents. In case
of SAM9X60 two of USB parrents are PLLA and UPLL. These clocks are
controlled by clk-sam9x60-pll.c driver. The round rate function for this
driver is sam9x60_pll_round_rate() which call in turn
sam9x60_pll_get_best_div_mul(). In case the requested rate is not in the
proper range (rate < characteristics->output[0].min &&
rate > characteristics->output[0].max) the sam9x60_pll_round_rate() will
return a negative number to its caller (called by
clk_core_round_rate_nolock()). clk_hw_round_rate() will return zero in
case a negative number is returned by clk_core_round_rate_nolock(). With
this, the USB clock will continue its rate computation even caller of
clk_hw_round_rate() returned an error. With this, the USB clock on SAM9X60
may not chose the best parent. I detected this after a suspend/resume
cycle on SAM9X60.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lkml.kernel.org/r/1579261009-4573-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 2 of 5.
of_unittest_platform_populate() left an elevated reference count for
grandchild nodes (which are platform devices). Fix the platform
device reference counts so that the memory will be freed.
Fixes: fb2caa50fbac ("of/selftest: add testcase for nodes with same name and address") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>