Kenneth Feng [Wed, 21 Oct 2020 06:03:08 +0000 (14:03 +0800)]
drm/amd/pm: fix the wrong fan speed in fan1_input
fix the wrong fan speed in fan1_input when the fan control mode is manual.
the fan speed value is not correct when we set manual mode to fan1_enalbe - 1.
since the fan speed in the metrics table always reflects the real fan speed,we
can fetch the fan speed for both auto and manual mode.
As far a I can tell uses a variant of DCN3xx which uses num_pkrs.
If we do not initialize the variable we will set the register field
to ilog2(0) = -1, though the mask will reduce that to 7. Pretty sure
7 is not the value we want here.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by: Marek Olšák <marek.olsak@amd.com> Reviewed-and-Tested-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 16 Oct 2020 16:56:26 +0000 (12:56 -0400)]
drm/amdgpu/gmc10: remove dummy read workaround for newer chips
Sienna Cichlid and newer have a hw fix so no longer require
the workaround.
Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jay Cornwall [Sat, 17 Oct 2020 13:38:43 +0000 (08:38 -0500)]
drm/amdkfd: Use same SQ prefetch setting as amdgpu
0 causes instruction fetch stall at cache line boundary under some
conditions on Navi10. A non-zero prefetch is the preferred default
in any case.
Fixes soft hang in Luxmark.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 16 Oct 2020 08:59:25 +0000 (16:59 +0800)]
drm/amd/swsmu: correct wrong feature bit mapping
1. when smc feature bit isn't mapped,
the feature state isn't showed on sysfs node of pp_features.
2. add pp_features table title
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dennis Li [Wed, 14 Oct 2020 09:11:41 +0000 (17:11 +0800)]
drm/amdgpu: protect eeprom update from GPU reset
because i2c is unstable in GPU reset, driver need protect
eeprom update from GPU reset, to not miss any bad page record.
Signed-off-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 16 Oct 2020 14:02:56 +0000 (10:02 -0400)]
drm/amdgpu: move amdgpu_num_kcq handling to a helper
Add a helper so we can set per asic default values. Also,
the module parameter is currently clamped to 8, but clamp it
per asic just in case some asics have different limits in the
future. Enable the option on gfx6,7 as well for consistency.
Acked-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On connector destruction call drm_dp_mst_topology_mgr_destroy
to release resources allocated in drm_dp_mst_topology_mgr_init.
Do it only if MST manager was initilized before otherwsie a crash
is seen on driver unload/device unplug.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: add a list in VM for BOs in the done state
Add a new list in VM for done state i.e. BOs which are
invalidated and updated in PTEs.
Signed-off-by: Mihir Bhogilal Patel <Mihir.Patel@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Wed, 14 Oct 2020 12:09:57 +0000 (20:09 +0800)]
drm/amdgpu: remove gfxhub_v1_1_funcs set
remove duplicate gfxhub v1.1 function set.
put function of gfxhub_v1_1_get_xgmi_info to gfxhub v1_0 function set.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Add debugfs entry for printing VM info
Create new debugfs entry to print memory info using VM buffer
objects.
V2: Added Common function for printing BO info.
Dump more VM lists for evicted, moved, relocated, invalidated.
Removed dumping VM mapped BOs.
V3: Fixed coding style comments, renamed print API and variables.
V4: Fixed coding style comments.
Signed-off-by: Mihir Bhogilal Patel <Mihir.Patel@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 15 Oct 2020 06:57:46 +0000 (14:57 +0800)]
drm/amdgpu: correct the gpu reset handling for job != NULL case
Current code wrongly treat all cases as job == NULL.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-and-tested-by: Jane Jian <Jane.Jian@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 13 Oct 2020 06:17:29 +0000 (14:17 +0800)]
drm/amd/pm: properly setting GPO feature on UMD pstate entering/exiting
Disable/enable the GPO feature on UMD pstate entering/exiting.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 18 Aug 2020 09:58:06 +0000 (17:58 +0800)]
drm/amdgpu: fulfill Navi gfx and pcie settings on umd pstate switching(V2)
Fulfill Navi gfx and pcie settings on umd pstate switching.
V2: temporarily skip the pcie ASPM setting considering the ASPM function
is not fully enabled yet
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 18 Aug 2020 09:10:48 +0000 (17:10 +0800)]
drm/amdgpu: add interface for setting MGCG perfmon
Enable Navi1X MGCG perfmon setting.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 18 Aug 2020 08:50:44 +0000 (16:50 +0800)]
drm/amdgpu: add interface for setting ASPM
Support NAVI10 ASPM setting.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 18 Aug 2020 04:43:25 +0000 (12:43 +0800)]
drm/amd/pm: correct gfx and pcie settings on umd pstate switching(V2)
For entering UMD stable Pstate, the operations to enter rlc_safe
mode, disable mgcg_perfmon and disable PCIE aspm are needed. And
the opposite operations should be performed on UMD stable Pstate
exiting.
V2: take those ASICs(CI/SI/VI) which may not support this into
consideration
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Sat, 10 Oct 2020 01:58:41 +0000 (09:58 +0800)]
drm/amd/pm: populate Arcturus PCIE link state
Populate current link speed, width and clock domain frequency.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Sat, 10 Oct 2020 01:36:02 +0000 (09:36 +0800)]
drm/amd/pm: populate the bootup LCLK frequency
As for other clock domains.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 14 Oct 2020 17:39:39 +0000 (13:39 -0400)]
drm/amdgpu/display: DRM_AMD_DC_DCN3_02 depends on DRM_AMD_DC_DCN3_01
Fix this to avoid build problems if DRM_AMD_DC_DCN3_02 is defined, but
DRM_AMD_DC_DCN3_01 is not.
Fixes: 36d26912e8d854 ("drm/amd/display: Add support for DCN302 (v2)") Acked-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Wed, 14 Oct 2020 11:47:32 +0000 (07:47 -0400)]
drm/amdkfd: Use kvfree in destroy_crat_image
Now that we use kvmalloc for the crat_image, we need to use kvfree when
we destroy this.
Fixes: d0e63b343e575e ("drm/amdkfd: Use kvmalloc instead of kmalloc for VCRAT") Reported-by: Morris Zhang <shiwu.zhang@amd.clm> Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Veerabadhran G [Thu, 8 Oct 2020 17:00:02 +0000 (22:30 +0530)]
drm/amdgpu: vcn and jpeg ring synchronization
Synchronize the ring usage for vcn1 and jpeg1 to workaround a hardware bug.
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 2 Sep 2020 08:10:10 +0000 (16:10 +0800)]
drm/amd/pm: increase mclk switch threshold to 200 us
To avoid underflow seen on Polaris10 with some 3440x1440
144Hz displays. As the threshold of 190 us cuts too close
to minVBlankTime of 192 us.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:345: warning: Function parameter or member 'force_timing_sync' not described in 'amdgpu_display_manager'
This new struct member was not documented at kernel-doc markup.
Fixes: 3d4e52d0cf24 ("drm/amd/display: Add debugfs for forcing stream timing sync") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bernard Zhao [Mon, 12 Oct 2020 11:46:16 +0000 (04:46 -0700)]
drm/amd/display: remove no need return value
Functions (disable_all_writeback_pipes_for_stream &
dc_enable_stereo & dc_post_update_surfaces_to_stream)
always return true, there is no need to keep the return value.
This change is to make the code a bit more readable.
Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: b4a7db71ea06 ("drm/amdgpu: add per device user friendly xgmi events for vega20") CC: Jonathan Kim <jonathan.kim@amd.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Thu, 8 Oct 2020 17:32:47 +0000 (13:32 -0400)]
drm/amd/display: Add green_sardine support to DM
Display Manager support for green_sardine
Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Thu, 8 Oct 2020 17:28:41 +0000 (13:28 -0400)]
drm/amd/display: Add green_sardine support to DC
Display Core support for green_sardine
Signed-off-by: Roman Li <Roman.Li@amd.com> Acked-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Wed, 5 Aug 2020 21:59:09 +0000 (17:59 -0400)]
drm/amdgpu: enable jpeg3.0 PG and CG for dimgrey_cavefish
Enable JPEG3.0 PG and CG for dimgrey_cavefish.
Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Wed, 5 Aug 2020 21:54:21 +0000 (17:54 -0400)]
drm/amdgpu: enable VCN3.0 PG and CG for dimgrey_cavefish
Enable VCN3.0 PG and CG for dimgrey_cavefish
Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>