Jamie Fox [Mon, 1 Oct 2018 13:39:07 +0000 (14:39 +0100)]
drm/malidp: Enable MMU prefetch on Mali-DP650
Mali-DP650 supports warming up the SMMU translations, by sending
requsts to the SMMU before a buffer is read.
There are two modes supported:
- PARTIAL: could be enabled when the buffer is composed of 4K or 64K
pages, the display hardware will send a configurable number of
requests before the actual reading.
- FULL: could be enabled when the buffer is composed of 1M or 2M
pages, the display hardware will send requests before reading for
all pages composing the buffer.
This patch adds a mechanism for detecting the page size and set the
MMU prefetch mode if possible.
Changes since v1:
- For imported buffers use the already populated
drm_gem_cma_object.sgt instead of calling
driver.gem_prime_get_sg_table, which works just for buffers
allocated through the gem_cma API.
Signed-off-by: Jamie Fox <jamie.fox@arm.com> Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com>
[rebased and re-ordered functions] Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Lowry Li [Fri, 31 Aug 2018 11:35:30 +0000 (19:35 +0800)]
drm/mali-dp: Implement plane alpha and pixel blend on malidp
Checks the pixel blending mode and plane alpha value when
do the plane_check. Mali DP supports blending the current plane
with the background either based on the pixel alpha blending
mode or by using the layer's alpha value, but not both at the
same time. If both case, plane_check will return failed.
Sets the HW when doing plane_update accordingly. If plane alpha
is the 0xffff, set the pixel blending bits accordingly. If not
we'd set ALPHA bit as zero and layer alpha value.
Changes since v1:
- Introduces to use it in the malidp driver, which depends on
the plane alpha patch
Changes since v2:
- Refines the comments of drm/mali-dp patchset
Changes since v3:
- Adds hardware limitation check
Changes since v4:
- Updates on drm/malidp, hardware limitation check only when
the format has alpha pixel.
- Rebases on drm-misc-next.
drm/malidp: Fix smart layer when doing pm_suspend/resume
Smart layer enable rectangles is set to 1 when the driver is probed,
however when doing pm_suspend the value is lost and it's not set again
making the SMART_LAYER unusable, fix that by initializing the number
of rectangles everytime we do a plane update.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
When we want to writeback to memory in NV12 format we need to program
the RGB2YUV coefficients. Currently, we don't program the coefficients
and NV12 doesn't work at all.
This patchset fixes that by programming a sane default(bt709, limited
range) as rgb2yuv coefficients.
In the long run, probably we need to think of a way for userspace to
be able to program that, but for now I think this is better than not
working at all or not advertising NV12 as a supported format for
memwrite.
Changes since v1:
- Write the rgb2yuv coefficients only once, since we don't change
them at all, just write them the first time NV12 is programmed,
suggested by Brian Starkey, here [1]
drm: mali-dp: Call drm_crtc_vblank_reset on device init
Currently, if userspace calls drm_wait_vblank before the crtc is
activated the crtc vblank_enable hook is called, which in case of
malidp driver triggers some warninngs. This happens because on
device init we don't inform the drm core about the vblank state
by calling drm_crtc_vblank_on/off/reset which together with
drm_vblank_get have some magic that prevents calling drm_vblank_enable
when crtc is off.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Dave Airlie [Thu, 27 Sep 2018 23:48:35 +0000 (09:48 +1000)]
Merge branch 'drm-next-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-next
More new features and fixes for 4.20:
- Add dynamic powergating support for VCN on picasso
- Scheduler cleanup
- Vega20 support for KFD
- DC cleanups and bug fixes
Dave Airlie [Thu, 27 Sep 2018 23:37:51 +0000 (09:37 +1000)]
Merge tag 'drm-intel-next-2018-09-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver Changes:
- Bugzilla 107600: Fix stuttering video playback on MythTV on old hardware (Chris)
- Avoid black screen when using CSC coefficient matrix (Raviraj)
- Hammer PDs on Baytrail to make sure they reload (Chris)
- Capture some objects if unable to capture all, on error (Chris)
- Add W/A for 16 GB DIMMs on SKL+ (Mahesh)
- Only enable IPC for symmetric memory configurations on KBL+ (Mahesh)
- Assume pipe A to have maximum stride limits (Ville)
- Always update update OA contexts via context image (Tvrtko)
- Icelake enabling patches (Madhav, Dhinakaran)
- Add Icelake DMC firmware (Anusha)
- Fixes for CI found corner cases (Chris)
- Limit the backpressure for request allocation (Chris)
- Park GPU on module load so usage starts from known state (Chris)
- Flush tasklet when checking for idle (Chris)
- Use coherent write into the context image on BSW+ (Chris)
- Fix possible integer overflow for framebuffers that get aligned past 4GiB (Ville)
- Downgrade fence timeout from warn to notice and add debug hint (Chris)
- Fixes to multi function encoder code (Ville)
- Fix sprite plane check logic (Dan, Ville)
- PAGE_SIZE vs. I915_GTT_PAGE_SIZE fixes (Ville)
- Decode memory bandwidth and parameters for BXT and SKL+ (Mahesh)
- Overwrite BIOS set IPC value from KMS (Mahesh)
- Multiple pipe handling code cleanups/restructurings/optimizations (Ville)
- Spare low 4G address for non-48bit objects (Chris)
- Free context_setparam of struct_mutex (Chris)
- Delay updating ring register state on resume (Chris)
- Avoid unnecessarily copying overlay IOCTL parameters (Chris)
- Update GuC power domain states even without submission (Michal)
- Restore GuC preempt-context across S3/S4 (Chris)
- Add kernel selftest for rapid context switching (Chris)
- Keep runtime power management ref for live selftests (Chris)
- GEM code cleanups (Matt)
Dave Airlie [Thu, 27 Sep 2018 23:31:03 +0000 (09:31 +1000)]
Merge tag 'drm-misc-next-2018-09-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.20:
UAPI Changes:
- None
Cross-subsystem Changes:
- MAINTAINERS: Move udl, mxsfb, and fsl-dcu into drm-misc (Stefan, Sean)
Core Changes:
- syncobj: Check condition before returning timeout in schedule() (Chris)
Driver Changes:
- various: First wave of drm_fbdev_generic_setup() conversions (Noralf)
- bochs/virtio: More format byte-order improvements (Gerd)
- mxsfb: A couple fixes + add runtime pm support (Leonard)
- virtio: Add vmap support for prime objects (Ezequiel)
Cc: Stefan Agner <stefan@agner.ch> Cc: Sean Paul <sean@poorly.run> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Gerd Hoffman <kraxel@redhat.com> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20180927093950.GA180365@art_vandelay
drm/scheduler: remove timeout work_struct from drm_sched_job (v3)
having a delayed work item per job is redundant as we only need one
per scheduler to track the time out the currently executing job.
v2: the first element of the ring mirror list is the currently
executing job so we don't need a additional variable for it
v3: squash in fixes for v3d and etnaviv
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/powerplay: Change id parameter type in pp_atomfwctrl_get_clk_information_by_clkid
Clang generates warnings when one enumerated type is implicitly
converted to another.
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/ppatomfwctrl.c:532:57:
warning: implicit conversion from enumeration type 'enum
atom_smu11_syspll0_clock_id' to different enumeration type 'BIOS_CLKID'
(aka 'enum atom_smu9_syspll0_clock_id') [-Wenum-conversion]
if (!pp_atomfwctrl_get_clk_information_by_clkid(hwmgr,
SMU11_SYSPLL0_SOCCLK_ID, &frequency))
In this case, that is expected behavior. To make that clear to Clang
without explicitly casting these values, change id's type to uint8_t
in pp_atomfwctrl_get_clk_information_by_clkid so no conversion happens.
Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Mon, 18 Jun 2018 18:47:21 +0000 (14:47 -0400)]
drm/amdkfd: Remove the requirement for atomic Ops on vg20
Firmware have the workaround to replace the atomic Ops with read-modify-write on CP side.
User should not expect atomic Ops on system memory works normally if system didn't not
support it.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-By: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During the 4.19 merge window for drm-misc, two patches critical to
supporting the display pipeline on the Allwinner R40 SoC were missed.
They were applied later but missed the merge window deadline. As a
result 4.19-rc1 kernel would crash on the R40 when it couldn't parse
the new device tree structure. We ended up removing support for the
R40 display pipeline for 4.19.
Since the missing patches are already merged for 4.20, we can now
revert the commit that removed support.
Alex Deucher [Wed, 26 Sep 2018 16:24:25 +0000 (11:24 -0500)]
drm/amdgpu/vcn: whitespace cleanup
Fix some indentation issues.
Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 26 Sep 2018 16:18:47 +0000 (11:18 -0500)]
drm/amdgpu/soc15: fix warnings in register macro
expects argument of type ‘unsigned int’ has type ‘long int’
Fixes: 52e211c1f04 ("drm/amdgpu:Add error message when register failed to reach expected value") Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Fri, 21 Sep 2018 18:47:45 +0000 (14:47 -0400)]
drm/amdgpu:Enable DPG mode on PCO
Add flag AMD_PG_SUPPORT_DPG to enable DPG mode on Picasso
Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Fri, 21 Sep 2018 18:43:18 +0000 (14:43 -0400)]
drm/amdgpu:Add DPG pause mode support
Add functions to support VCN DPG pause mode.
Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Mon, 10 Sep 2018 22:15:11 +0000 (18:15 -0400)]
drm/amdgpu:Add DPG pause state
Add DPG pause state to support VCN DPG mode.
Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Fri, 21 Sep 2018 18:35:32 +0000 (14:35 -0400)]
drm/amdgpu:Add DPG mode support for vcn 1.0
Add DPG mode start/stop/mc_resume/clock_gating to
support vcn 1.0 DPG mode.
Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Mon, 10 Sep 2018 20:00:36 +0000 (16:00 -0400)]
drm/amdgpu:Add DPG mode read/write macro
Some registers read/write needs program through SDRAM pool under
DPG mode.
Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Mon, 10 Sep 2018 19:23:40 +0000 (15:23 -0400)]
drm/amdgpu:Add DPG support flag
Add DPG support flag for VCN DPG mode.
Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Mon, 10 Sep 2018 18:58:16 +0000 (14:58 -0400)]
drm/amdgpu:Add new register offset/mask to support VCN DPG mode
New register offset/mask need to be added to support VCN DPG mode.
Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Mon, 10 Sep 2018 18:06:08 +0000 (14:06 -0400)]
drm/amdgpu:Use register UVD_SCRATCH9 for VCN ring/ib test
Use register UVD_SCRATCH9 for VCN ring/ib test. Since those registers
can't be directly accessed under DPG(Dynamic Power Gate) mode.
Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 17 Sep 2018 13:29:28 +0000 (15:29 +0200)]
drm/amdgpu: move more defines into amdgpu_irq.h
Everything that isn't related to the IH ring.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 17 Sep 2018 13:18:37 +0000 (15:18 +0200)]
drm/amdgpu: move more interrupt processing into amdgpu_irq.c
Add a callback to amdgpu_ih_process to remove most of the IV logic.
Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only print the warning if there was actually some fence processed
from the SW fallback timer.
v2: Add return value to amdgpu_fence_process to let
amdgpu_fence_fallback know fences were actually
processed and then print the warning.
v3: Always return true if seq != last_seq
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Sun, 16 Sep 2018 18:13:21 +0000 (20:13 +0200)]
drm/amdgpu: cleanup amdgpu_ih.c
Cleanup amdgpu_ih.c to be able to handle multiple interrupt rings.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 17 Sep 2018 13:41:45 +0000 (15:41 +0200)]
drm/amdgpu: make function pointers mandatory
We always want those to be setup correctly.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 20 Sep 2018 11:26:18 +0000 (13:26 +0200)]
drm/amdgpu: drop extra newline in amdgpu_iv trace
That is superflous here.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While the apg_end address is 0xffffffff, if add 1 with it, the value will be
overflow and roll back to 0. So when 0 is written to
mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR, the system aperture is actually disabled. And
so any access to vram will trigger a page fault.
Raven2's HW issue only need increase the vram end address, and needn't do it on
the agp.
Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 20 Sep 2018 09:06:22 +0000 (17:06 +0800)]
drm/amdgpu: Remove redundant code in gfx_v8_0.c
the CG related registers have been programed in golden setting
PG register default value is 0.
Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Hang Zhou <hang.zhou@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Tue, 11 Sep 2018 02:33:38 +0000 (10:33 +0800)]
drm/amdgpu: Halt rlc/cp in rlc_safe_mode
before halt rlc/cp, need to
1. enter rlc safe mode
2. wait rlc/cp idle
Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Hang Zhou <hang.zhou@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Tue, 28 Aug 2018 10:20:19 +0000 (18:20 +0800)]
drm/amdgpu: Refine function name
change function name gfx_v6/7/8/9_0_gpu_init to
gfx_v6/7/8/9_0_constants_init.
this function is just for init gfx constants such
as max pipes, render backends...
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Tue, 31 Oct 2017 17:32:53 +0000 (13:32 -0400)]
drm/amdkfd: Vega20 bring up on amdkfd side
Add Vega20 device IDs, device info and enable it in KFD.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Shaoyun Liu [Tue, 6 Feb 2018 20:37:53 +0000 (15:37 -0500)]
drm/amdgpu: Add vega20 support on kfd probe
Add Vega20 support in amdgpu_amdkfd_device_probe.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Shaoyun Liu [Tue, 13 Mar 2018 21:44:09 +0000 (17:44 -0400)]
drm/amd: Interface change to support 64 bit page_table_base
amdgpu_gpuvm_get_process_page_dir should return the page table address
in the format expected by the pm4_map_process packet for all ASIC
generations.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Fri, 9 Feb 2018 21:29:14 +0000 (16:29 -0500)]
drm/amdkfd: Make the number of SDMA queues variable
Vega20 supports 8 SDMA queues per engine
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emily Deng [Thu, 9 Aug 2018 07:05:31 +0000 (15:05 +0800)]
drm/amdgpu/sriov: Correct the setting about sdma doorbell offset of Vega10
Correct the format
For vega10 sriov, the sdma doorbell must be fixed as follow to keep the
same setting with host driver, or it will happen conflicts.
Signed-off-by: Emily Deng <Emily.Deng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Fri, 23 Mar 2018 21:20:41 +0000 (16:20 -0500)]
drm/amdgpu: Doorbell assignment for 8 sdma user queue per engine
Change doorbell assignments to allow routing doorbells for 8 user
mode SDMA queues per engine.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jay Cornwall [Tue, 2 May 2017 22:39:37 +0000 (17:39 -0500)]
drm/amdkfd: Add wavefront context save state retrieval ioctl
Wavefront context save data is of interest to userspace clients for
debugging static wavefront state. The MQD contains two parameters
required to parse the control stack and the control stack itself
is kept in the MQD from gfx9 onwards.
Add an ioctl to fetch the context save area and control stack offsets
and to copy the control stack to a userspace address if it is kept in
the MQD.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Tue, 21 Aug 2018 00:15:00 +0000 (20:15 -0400)]
drm/amdkfd: Report SDMA firmware version in the topology
Also save the version in struct kfd_dev so we only need to query
it once.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emily Deng [Thu, 14 Dec 2017 01:31:01 +0000 (09:31 +0800)]
drm/amdkfd: KFD doesn't support TONGA SRIOV
KFD module doesn't support TONGA SRIOV, if init KFD module in TONGA SRIOV
environment, it will let compute ring IB test fail.
Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Mon, 4 Jun 2018 19:22:24 +0000 (15:22 -0400)]
drm/amdkfd: reflect atomic support in IO link properties
Add the flags of properties according to Asic type and pcie
capabilities.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Thu, 13 Sep 2018 20:55:44 +0000 (16:55 -0400)]
drm/amdgpu:No action when VCN PG state is unchanged
When VCN PG state is unchanged, it is unnecessary to reset power
gate state
Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Raise dispclk value for dce120 by 15%
[Why]
The DISPCLK value was previously requested to be 15% higher for all
ASICs that went through the dce110 bandwidth code path. As part of a
refactoring of dce_clocks and the dce110 set bandwidth codepath this
was removed for power saving considerations.
That change caused display corruption under certain hardware
configurations with Vega10.
[How]
The 15% DISPCLK increase is brought back but only on dce110 for now.
This is should be a temporary workaround until the root cause is sorted
out for why this occurs on Vega (or other ASICs, if reported).
Tested-by: Nick Sarnie <sarnex@gentoo.org> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previously night light forced a full update by
applying a transfer function update regardless of if it was changed.
This logic was removed,
Now gamma surface updates are only applied when there is also a plane
info update, this does not work in cases such as using the night light
slider.
[HOW]
When moving the night light slider we will perform a full update if
the gamma has changed and there is a surface, even when the surface
has not changed. Also get stream updates in setgamma prior to
update planes and stream.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Li [Wed, 12 Sep 2018 14:58:09 +0000 (10:58 -0400)]
drm/amd/display: Remove mst_hotplug_work
[Why]
The work struct's schedule call was removed a while ago, making this
useless.
[How]
Remove it.
Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Guard against null stream dereference in do flip
[Why]
During suspend under some hardware configurations can result in a
series of atomic commits with a NULL stream status - which
causes a NULL pointer dereference. This should be guarded.
[How]
Exit early from the function - if we can't access the stream then
there isn't anything that can be done here.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: program v_update and v_ready with proper field
[WHY]
There are two different variables used to calculate v_update and v_ready,
one for validation and the other for performance parameter calculation.
Before the variable for validation was used which caused underflow on
1080edp with vsr enabled
[HOW]
program v_update and v_ready with the variables for performance parameter
calculation
Signed-off-by: Su Sung Chung <su.chung@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when display configuration changes, dc need to update the changes
to powerplay, also need to trigger a power state task.
amdgpu_pm_compute_clocks is the interface to set power state task
either dpm enabled or powerplay enabled
Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Thu, 27 Sep 2018 01:00:06 +0000 (11:00 +1000)]
Merge tag 'drm-hisilicon-next-2018-09-26' of github.com:xin3liang/linux into drm-next
- A crash fix founded in recent linux-next from John Garry
- One sparse warning fix from Souptick Joarder
- Some xxx_unref cleanup from Thomas Zimmermann
drm/fsl-dcu: Replace drm_dev_unref with drm_dev_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Leonard Crestez [Mon, 17 Sep 2018 13:42:15 +0000 (16:42 +0300)]
drm/mxsfb: Switch to drm_atomic_helper_commit_tail_rpm
The lcdif block is only powered on when display is active so plane
updates when not enabled are not valid. Writing to an unpowered IP block
is mostly ignored but can trigger bus errors on some chips.
Prevent this situation by switching to drm_atomic_helper_commit_tail_rpm
and having the drm core ensure atomic_plane_update is only called while
the crtc is active. This avoids having to keep track of "enabled" bits
inside the mxsfb driver.
This also requires handling the vblank event for disable from
mxsfb_pipe_disable.
Leonard Crestez [Mon, 17 Sep 2018 13:42:14 +0000 (16:42 +0300)]
drm/mxsfb: Add PM_SLEEP support
Since power to the lcdif block can be lost on suspend implement
PM_SLEEP_OPS using drm_mode_config_helper_suspend/resume to save/restore
the current mode.
Leonard Crestez [Mon, 17 Sep 2018 13:42:12 +0000 (16:42 +0300)]
drm/mxsfb: Fix initial corrupt frame when activating display
LCDIF will repeatedly display data from CUR_BUF and set CUR_BUF to
NEXT_BUF when done. Since we are only ever writing to NEXT_BUF the
display will show an initial corrupt frame.
Fix by writing the FB paddr to both CUR_BUF and NEXT_BUF when
activating the CRTC.
Dmitry Osipenko [Sun, 19 Aug 2018 14:24:20 +0000 (17:24 +0300)]
drm/tegra: Detach devices from IOMMU DMA domain on arm32
All Tegra DRM devices are getting attached to an implicit IOMMU DMA
domain if CONFIG_ARM_DMA_USE_IOMMU=y. Since Tegra DRM driver manages IOMMU
by itself, the devices must be detached from the implicit domain using
arch-specific IOMMU-API. Note that this works only for arm32 and not for
arm64, which will remain broken if CONFIG_IOMMU_DMA is enabled.
Dmitry Osipenko [Thu, 30 Aug 2018 00:12:47 +0000 (03:12 +0300)]
gpu: host1x: Detach Host1x from IOMMU DMA domain on arm32
Host1x is getting attached to an implicit IOMMU DMA domain if
CONFIG_ARM_DMA_USE_IOMMU=y. Since Host1x driver manages IOMMU by
itself, Host1x device must be detached from the implicit domain using
arch-specific IOMMU-API.
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
The SOR implemented in Tegra194 is subtly different from its predecessor
found in Tegra186. Most notably some registers have been moved around so
it is no longer compatible.
The display hub integrated into Tegra194 is almost identical to the one
found on Tegra186. However, it doesn't support DSC (display stream
compression) so it isn't fully compatible.
drm/tegra: dc: Do not register DC without primary plane
Tegra194 contains a fourth display controller that does not own any
windows. Therefore, we cannot currently assign a primary plane to it
which causes KMS to eventually crash. Do not register the display
controller if it owns no windows to work around this.
Note that we still have to enable and probe the display controller
because for some reason all display controllers need to be powered
(and/or clocked) before any registers can be accessed in any of the
display controllers.
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Sean Paul [Wed, 19 Sep 2018 20:39:58 +0000 (16:39 -0400)]
MAINTAINERS: Move mxsfb drm driver to drm-misc tree
Another "small driver" moving into drm-misc. Stefan has also offered to
co-maintain it.
Cc: Marek Vasut <marex@denx.de> Cc: Stefan Agner <stefan@agner.ch> Cc: David Airlie <airlied@linux.ie> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180919204026.3217-2-sean@poorly.run
Currently, virtio_gpu_object_kmap() is only called by
virtio_gpufb_create(), when a DRM framebuffer is created.
Thus, instead of returning the vmap'ed address, emit a warning
if virtio_gpu_object_kmap is called on an already mapped
object. With this change, kmap/kunmap calls are now balanced.