Ville Syrjälä [Thu, 13 Sep 2018 13:16:22 +0000 (16:16 +0300)]
drm/i915: Clear DRIVER_ATOMIC on a per-device basis
Currently we're clearing DRIVER_ATOMIC in driver.driver_features
for older platforms. This will not work correctly should we ever
have a system with and old and new GPU in it. While that is not
possible currently let's make the code more correct and use
the per-device driver_features instead.
Ville Syrjälä [Thu, 13 Sep 2018 13:16:21 +0000 (16:16 +0300)]
drm: Introduce per-device driver_features
We wish to control certain driver_features flags on a per-device basis
while still sharing a single drm_driver instance across all the
devices. To that end introduce device.driver_features. By default
it will be set to ~0 to not impose any limits beyond
driver.driver_features. Drivers can then clear specific flags
in the per-device bitmask to limit the capabilities of the device.
An alternative approach would be to copy the driver_features from
the driver into the device in drm_dev_init(), however that would
require verifying that no driver is currently changing
driver.driver_features after drm_dev_init(). Hence the ~0 apporach
was easier.
Ideally we'd also make drm_driver const but there is plenty of code
left that wants to mutate it (eg. various vfunc assignments). We'll
need to fix all that up before we can make it const.
And while at it fix up the type of the feature flag passed to
drm_core_check_feature().
v2: Streamline the && vs. & (Chris)
s/int/u32/ in drm_core_check_feature() args
Since commit 4a878c03d562 ("drm: bridge: Detach bridge from encoder at
encoder cleanup time"), it is generally no longer correct to detach bridges
from encoders manually. Document that.
Marc Zyngier [Sun, 5 Aug 2018 17:28:57 +0000 (18:28 +0100)]
drm/bridge: analogix_dp: Downgrade "Link Training" messages to dev_dbg
The Analogix DP bridge driver is pretty verbose, and outputs
things like
[ 619.414067] rockchip-dp ff970000.edp: Link Training Clock Recovery success
[ 619.429233] rockchip-dp ff970000.edp: Link Training success!
each time the display gets unblanked. While it is good to know
that the device is behaving correctly, users already know that
because they can see some video output.
Let's keep these messages for cases where we need to actually
debug the driver (we have dynamic debug to enable them at runtime
if need be), and let's keep the kernel quiet otherwise.
Maxime Ripard [Tue, 11 Sep 2018 11:33:25 +0000 (13:33 +0200)]
drm/sun4i: fix build failure with CONFIG_DRM_SUN8I_MIXER=m
Having DRM_SUN4I built-in but DRM_SUN8I_MIXER as a loadable module results in
a link error, as we try to access a symbol from the sun8i_tcon_top.ko module:
This solves the problem by adding a silent symbol for the tcon_top module,
building it as a separate module in exactly the cases that we need it,
but in a way that it is reachable by the other modules.
Fixes: cf77d79b4e29 ("drm/sun4i: tcon: Add another way for matching mixers with tcon") Fixes: 0305189afb32 ("drm/sun4i: tcon: Add support for R40 TCON") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Matt Hart <matthew.hart@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180911113325.11024-1-maxime.ripard@bootlin.com
Peter Wu [Mon, 10 Sep 2018 13:21:56 +0000 (15:21 +0200)]
qxl: refactor to use drm_fb_helper_fbdev_setup
Lots of code can be removed by relying on fb-helper:
- "struct drm_framebuffer" moves to fb_helper.fb.
- "struct drm_gem_object" moves to fb_helper.obj[0].
- "struct qxl_device" can be inferred as drm_fb_helper is embedded.
- qxl_user_framebuffer_create -> drm_gem_fb_create.
- qxl_user_framebuffer_destroy -> drm_gem_fb_destroy.
- qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow).
Misc notes:
- The dirty callback is preserved as it is necessary to trigger update
commands in the hw (the screen stays black otherwise).
- No idea when .create_handle in drm_framebuffer_funcs is used, but use
the same drm_gem_fb_create_handle to match drm_gem_fb_funcs.
- I don't know why qxl_fb_find_or_create_single used to check for an
existing framebuffer and removed that check to match other drivers.
- Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to
be dynamically allocated. Replace the existing defio config by
drm_fb_helper_defio_init to accomodate this.
Testing results: startx with fbdev, modesetting and qxl all seems to
work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously
fails but others are fine. QEMU -spice and QEMU -spice with vdagent and
multiple (resized) displays (via remote-viewer) also works.
unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a
use-after-free in qxl_check_idle via qxl_ttm_fini).
Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that
would result in further code reduction, improve error handling (like not
leaking shadow memory), but unfortunately QXL has no implementation for
qxl_gem_prime_vmap.
udmabuf builds without it, but if userspace can not create memfd
handles in the first place it is rather pointless to include it,
except for test builds.
Daniel Vetter [Wed, 22 Aug 2018 08:54:05 +0000 (10:54 +0200)]
drm/fb: Stop leaking physical address
For buffer sharing, use dma-buf instead. We can't set smem_start to 0
unconditionally since that's used by the fbdev mmap default
implementation. And we have plenty of userspace which would like to
keep that working.
This might break legit userspace - if it does we need to look at a
case-by-cases basis how to handle that. Worst case I expect overrides
for only specific drivers, since anything remotely modern should be
using dma-buf/prime now (which is about 7 years old now for DRM
drivers).
This issue was uncovered because Noralf's rework to implement a
generic fb_probe also implements it's own fb_mmap callback. Which
means smem_start didn't have to be set anymore, which blew up some
blob in userspace rather badly.
Acked-by: Sean Paul <seanpaul@chromium.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: John Stultz <john.stultz@linaro.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-4-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 22 Aug 2018 08:54:04 +0000 (10:54 +0200)]
fbdev: Add FBINFO_HIDE_SMEM_START flag
DRM drivers really, really, really don't want random userspace to
share buffer behind it's back, bypassing the dma-buf buffer sharing
machanism. For that reason we've ruthlessly rejected any IOCTL
exposing the physical address of any graphics buffer.
Unfortunately fbdev comes with that built-in. We could just set
smem_start to 0, but that means we'd have to hand-roll our own fb_mmap
implementation. For good reasons many drivers do that, but
smem_start/length is still super convenient.
Hence instead just stop the leak in the ioctl, to keep fb mmap working
as-is. A second patch will set this flag for all drm drivers.
Daniel Vetter [Wed, 22 Aug 2018 08:54:02 +0000 (10:54 +0200)]
fbdev: Drop FBINFO_CAN_FORCE_OUTPUT flag
This was only added for the drm's fbdev emulation support, so that it
would try harder to show the Oops.
Unfortunately this never really worked reliably, and in practice ended
up pushing the real Oops off the screen due to plentyfull locking,
sleep-while-atomic and other issues. So we removed all that support
from the fbdev emulation a while back. Aside: We've also removed the
kgdb support, for similar reasons.
Since it's such a small patch I figured I don't split this up into the
usual 3-phase removal.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thierry Reding <treding@nvidia.com> Cc: David Lechner <david@lechnology.com> Cc: nouveau@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-1-daniel.vetter@ffwll.ch
DRM_MODE_REFLECT_X and DRM_MODE_REFLECT_Y meaning seems a bit unclear
to me, so try to clarify that with a bit of ascii graphics.
Changes since v1:
- Move the ascii graphics in the kerneldoc where all plane
properties are already documented and make sure it's properly
rendered, suggestested by Daniel Vetter.
drivers/gpu/drm/drm_plane.c: In function 'drm_mode_getplane_res':
drivers/gpu/drm/drm_plane.c:475:26: warning:
variable 'config' set but not used [-Wunused-but-set-variable]
Marc Zyngier [Sun, 5 Aug 2018 12:48:07 +0000 (13:48 +0100)]
drm/rockchip: Allow driver to be shutdown on reboot/kexec
Leaving the DRM driver enabled on reboot or kexec has the annoying
effect of leaving the display generating transactions whilst the
IOMMU has been shut down.
In turn, the IOMMU driver (which shares its interrupt line with
the VOP) starts warning either on shutdown or when entering the
secondary kernel in the kexec case (nothing is expected on that
front).
A cheap way of ensuring that things are nicely shut down is to
register a shutdown callback in the platform driver.
Peter Wu [Thu, 6 Sep 2018 22:18:10 +0000 (00:18 +0200)]
drm/fb-helper: improve documentation and print warnings
Clarify the relation between drm_fb_helper_fbdev_setup/teardown. Clarify
requirements for the new generic fbdev emulation API and log some more
details in case the driver does something wrong. Fix related typos.
While investigating a potential fix I noticed that a lot of open-coded
functionality is already implemented elsewhere, so start converting it:
bochs_fbdev_init -> drm_fb_helper_fbdev_setup: trivial (similar impl).
bochs_fbdev_fini -> drm_fb_helper_fbdev_teardown: requires unembedding
"struct drm_framebuffer" from "struct bochs_framebuffer".
Unembedding drm_framebuffer is made easy using drm_gem_fbdev_fb_create
which can replace bochs_fbdev_destroy and custom routines in bochs_mm.c.
For this to work, the GEM object is moved into "drm_framebuffer". After
that, "bochs_framebuffer" is no longer needed and therefore removed.
Remove the unused "size" and "initialized" fields from fb, the latter is
not necessary as drm_fb_helper_fbdev_teardown can be called even if
bochsfb_create fails. This theory was tested by returning early and
late (just before drm_gem_fbdev_fb_create). Both scenarios fail
gracefully although the latter seems to leak the object from
bochsfb_create_object (not a regression).
Guess on the reason for the encoder leak: drm_framebuffer_cleanup was
previously used, but did not destroy much. drm_fb_helper_fbdev_teardown
is now used and calls drm_framebuffer_remove which does a bit more work.
Tested with 'echo 0 > /sys/class/vtconsole/vtcon1/bind; rmmod bochs_drm'
and also with Xorg + fbdev (startx -> xterm). The latter triggered a
warning in ttm_bo_vm_open that existed before, see
https://lkml.kernel.org/r/1464000533-13140-4-git-send-email-mstaudt@suse.de
drm: refuse ADDFB2 ioctl for broken bigendian drivers
Drivers must set the quirk_addfb_prefer_host_byte_order quirk to make
the drm_mode_addfb() compat code work correctly on bigendian machines.
If they don't they interpret pixel_format values incorrectly for bug
compatibility, which in turn implies the ADDFB2 ioctl does not work
correctly then. So block it to make userspace fallback to ADDFB.
drivers/gpu/drm/virtio/virtgpu_display.c: In function 'virtio_gpu_framebuffer_init':
drivers/gpu/drm/virtio/virtgpu_display.c:78:28: warning:
variable 'bo' set but not used [-Wunused-but-set-variable]
struct virtio_gpu_object *bo;
^
Daniel Vetter [Wed, 5 Sep 2018 18:15:09 +0000 (20:15 +0200)]
drm: Update todo.rst
- drmP.h is now fully split up.
- vkms is happening (and will gain its own todo and docs under a new
vkms.rst file real soon)
- legacy cruft is completely hidden now, drm_vblank.c is split out
from drm_irq.c now. I've decided to drop the task to split out
drm_legacy.ko, partially because Dave already rejected a patch to
hide the old dri1 drivers better. Current state feels good enough to
me.
- best_encoder atomic cleanup is done (it's now the default, not even
exported anymore)
- bunch of smaller things
v2:
- Explain why the drm_legacy.ko task is dropped (Emil).
- typos (Sam).
v3: Fix typo (Ilia)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20180905181509.19530-1-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 5 Sep 2018 13:57:06 +0000 (15:57 +0200)]
drm: Drop drmP.h from drm_connector.c
Only needed minimal changes in drm_internal.h (for the drm_ioctl_t
type and a few forward declarations), plus a few missing includes in
drm_connector.c.
Yay, the last stage of the drm header cleanup can finally commence!
Daniel Vetter [Wed, 5 Sep 2018 13:57:05 +0000 (15:57 +0200)]
drm: Add drm/drm_util.h header file
We have a bunch of neat little macros all over the place which should
move to kernel.h. But some of them died in bikesheds on lkml, and we
need a decent home for them.
Jonathan Liu [Fri, 7 Sep 2018 04:19:45 +0000 (12:19 +0800)]
drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels
The hardware supports dithering on TCON channel 0 which is used for LCD
panels.
Dithering is a method of approximating a color from a mixture of other
colors when the required color isn't available. It reduces color
banding artifacts that can be observed when displaying gradients
(e.g. grayscale gradients). This may occur when the image that needs
to be displayed is 24-bit but the LCD panel is a lower bit depth and
does not perform dithering on its own.
drm/sun4i: tcon: Rename Dithering related register macros
Dithering is only supported for TCON channel 0. Throughout the datasheet
all the names associated with these register are prefixed "TCON0",
instead of "TCON". The only exception is the control register
"TCON_FRM_CTL_REG".
drm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpu
sun4i_tcon0_mode_set_cpu() currently accepts struct mipi_dsi_device *
as its second parameter. This is derived from drm_encoder.
The DSI encoder is tied to the CPU interface mode of the TCON as a
special case. In theory, if hardware were available, we could also
support normal CPU interface modes. It is better to pass the generic
encoder instead of the specialized mipi_dsi_device, and handle the
differences inside the function.
Passing the encoder would also enable the function to pass it, or any
other data structures related to it, to other functions expecting it.
One such example would be dithering support that will be added in a
later patch, which looks at properties tied to the connector to
determine whether dithering should be enabled or not.
Chunming Zhou [Thu, 30 Aug 2018 06:48:30 +0000 (14:48 +0800)]
drm: expand replace_fence to support timeline point v2
we can place a fence to a timeline point after expanded.
v2: change func parameter order
Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/246543/
Chunming Zhou [Thu, 30 Aug 2018 06:48:29 +0000 (14:48 +0800)]
drm: expand drm_syncobj_find_fence to support timeline point v2
we can fetch timeline point fence after expanded.
v2: The parameter fence is the result of the function and should come last.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/246541/
Chunming Zhou [Thu, 30 Aug 2018 06:48:28 +0000 (14:48 +0800)]
drm: rename null fence to stub fence in syncobj v2
moved to front of file.
stub fence will be used by timeline syncobj as well.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/246539/
Chunming Zhou [Thu, 30 Aug 2018 06:48:27 +0000 (14:48 +0800)]
drm: fix syncobj null_fence_enable_signaling
That is certainly totally nonsense. dma_fence_enable_sw_signaling()
is the function who is calling this callback.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/246535/
Chris Wilson [Wed, 5 Sep 2018 15:31:16 +0000 (16:31 +0100)]
drm: Reject unknown legacy bpp and depth for drm_mode_addfb ioctl
Since this is handling user provided bpp and depth, we need to sanity
check and propagate the EINVAL back rather than assume what the insane
client intended and fill the logs with DRM_ERROR.
v2: Check both bpp and depth match the builtin pixel format, and
introduce a canonical DRM_FORMAT_INVALID to reserve 0 against any future
fourcc.
v3: Mark up DRM_FORMAT_C8 as being {bpp:8, depth:8}
Testcase: igt/kms_addfb_basic/legacy-format Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180905153116.28924-1-chris@chris-wilson.co.uk
Userspace on big endian machhines typically expects the ADDFB ioctl
returns a big endian framebuffer. drm_mode_addfb() will call
drm_mode_addfb2() unconditionally with little endian DRM_FORMAT_*
values though, which is wrong. This patch fixes that.
Drivers (both kernel and xorg) have quirks in place to deal with the
broken drm_mode_addfb() behavior. Because of this we can't just change
drm_mode_addfb() behavior for everybody without breaking things. Add
the quirk_addfb_prefer_host_byte_order field to mode_config, so drivers
can opt-in.
framebuffer_check() expects that drm_get_format_info() will not fail if
the __drm_format_info() call was successful. That'll work only in case
both are called with the same pixel_format value, so masking out the
DRM_FORMAT_BIG_ENDIAN flag isn't a good idea.
drm/rockchip: rgb: add stub functions when rgb encoder is disabled
The newly added internal rgb encoder for Rockchip vops is missing
stubs for the case that the rgb output part is not enabled in the
kernel config. So add these.
Fixes: 1f0f01515172 (drm/rockchip: Add support for Rockchip Soc RGB output interface) Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[seanpaul fixed up checkpatch nits] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180905191302.26023-1-heiko@sntech.de
Haneen Mohammed [Mon, 3 Sep 2018 21:18:17 +0000 (00:18 +0300)]
drm/vkms: Fix race condition around accessing frame number
crtc_state is accessed by both vblank_handle() and the ordered
work_struct handle vkms_crc_work_handle() to retrieve and or update
the frame number for computed CRC.
Since work_struct can fail, add frame_end to account for missing frame
numbers.
Use (frame_[start/end]) for synchronization between hrtimer callback
and ordered work_struct handle.
This patch passes the following subtests from igt kms_pipe_crc_basic test:
bad-source, read-crc-pipe-A, read-crc-pipe-A-frame-sequence,
nonblocking-crc-pipe-A, nonblocking-crc-pipe-A-frame-sequence
Heiko Stuebner [Thu, 30 Aug 2018 11:09:37 +0000 (13:09 +0200)]
drm/rockchip: vop: add rk3188 vop definitions
The rk3188 has 2 vops not using iommus which only output directly
to a rgb interface per vop. So all other output modes like hdmi
are provided by external brige chips.
Sandy Huang [Thu, 30 Aug 2018 21:12:06 +0000 (23:12 +0200)]
drm/rockchip: Add support for Rockchip Soc RGB output interface
Some Rockchip CRTCs, like rv1108 and px30, can directly output parallel
and serial RGB data to panel or conversion chip.
So add a feature-bit for vops to mark the ability for these direct
outputs and add an internal encoder in that case, that can attach to
bridge chipsor panels.
Changes in v7:
1. forget to delete rockchip_rgb_driver and delete it.
Changes in v6:
1. Update according to Heiko Stuebner' implemention, rgb output is
part of vop's feature, should not register as a independent
driver.
Changes in v5:
1. add SPDX-License-Identifier tag
Changes in v4:
1. add support px30;
Changes in v3:
1. update for rgb-mode move to panel node.
Changes in v2:
1. add error log when probe failed;
2. update name_to_output_mode() according to sean's suggest;
3. Fix uninitialized use of ret.
Heiko Stuebner [Thu, 30 Aug 2018 21:12:05 +0000 (23:12 +0200)]
drm/rockchip: add function to check if endpoint is a subdriver
To be able to have both internal subdrivers and external bridge
drivers as output endpoints of vops, add a function to be able
to distinguish these.
changes in v8:
- improved function documentation
- better error handling
- put calls for node and pdev references
changes in v6:
- added function to check subdriver vs. bridge
dma-buf/udmabuf: Fix NULL pointer dereference in udmabuf_create
There is a potential execution path in which pointer memfd is NULL when
passed as argument to fput(), hence there is a NULL pointer dereference
in fput().
Fix this by null checking *memfd* before calling fput().
Peter Wu [Tue, 4 Sep 2018 20:27:47 +0000 (22:27 +0200)]
qxl: fix null-pointer crash during suspend
"crtc->helper_private" is not initialized by the QXL driver and thus the
"crtc_funcs->disable" call would crash (resulting in suspend failure).
Fix this by converting the suspend/resume functions to use the
drm_mode_config_helper_* helpers.
Tested system sleep with QEMU 3.0 using "echo mem > /sys/power/state".
During suspend the following message is visible from QEMU:
spice/server/display-channel.c:2425:display_channel_validate_surface: canvas address is 0x7fd05da68308 for 0 (and is NULL)
spice/server/display-channel.c:2426:display_channel_validate_surface: failed on 0
This seems to be triggered by QXL_IO_NOTIFY_CMD after
QXL_IO_DESTROY_PRIMARY_ASYNC, but aside from the warning things still
seem to work (tested with both the GTK and -spice options).
Chris Wilson [Mon, 3 Sep 2018 09:31:55 +0000 (10:31 +0100)]
drm: Remove "protection" around drm_vma_offset_manager_destroy()
Using a spinlock to serialize the destroy function, within the destroy
function itself does not prevent the buggy driver from shooting
themselves in the foot - either way they still have a use-after-free
issue.
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180903093155.3825-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 4 Sep 2018 11:57:19 +0000 (12:57 +0100)]
drm: Suppress user controlled spam for invalid drm_wait_vblank_ioctl
The ioctl arguments are under control of the user and as such we should
resist any temptation to flood the kernel logs with their errors.
Relegate the DRM_ERROR to a DRM_DEBUG so the user has to opt into
hearing of their own mistakes. (One day we will have a small ringbuffer
attached to the task, so that the concerned process can inspect its own
debug info for EINVAL without them being hitting syslog at all.)
Michał Mirosław [Sat, 1 Sep 2018 14:08:44 +0000 (16:08 +0200)]
fbdev: allow apertures == NULL in remove_conflicting_framebuffers()
Interpret (otherwise-invalid) NULL apertures argument to mean all-memory
range. This will allow to remove several duplicates of this code
from drivers in following patches.
Gerd Hoffmann [Mon, 27 Aug 2018 09:34:44 +0000 (11:34 +0200)]
Add udmabuf misc device
A driver to let userspace turn memfd regions into dma-bufs.
Use case: Allows qemu create dmabufs for the vga framebuffer or
virtio-gpu ressources. Then they can be passed around to display
those guest things on the host. To spice client for classic full
framebuffer display, and hopefully some day to wayland server for
seamless guest window display.
qemu test branch:
https://git.kraxel.org/cgit/qemu/log/?h=sirius/udmabuf
Cc: David Airlie <airlied@linux.ie> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180827093444.23623-1-kraxel@redhat.com
Hans Verkuil [Mon, 27 Aug 2018 07:58:17 +0000 (09:58 +0200)]
drm_dp_cec: add note about good MegaChips 2900 CEC support
A big problem with DP CEC-Tunneling-over-AUX is that it is tricky
to find adapters with a chipset that supports this AND where the
manufacturer actually connected the HDMI CEC line to the chipset.
Add a mention of the MegaChips 2900 chipset which seems to support
this feature well.
Hans Verkuil [Mon, 27 Aug 2018 07:58:16 +0000 (09:58 +0200)]
drm_dp_cec: check that aux has a transfer function
If aux->transfer == NULL, then just return without doing
anything. In that case the function is likely called for
a non-(e)DP connector.
This never happened for the i915 driver, but the nouveau and amdgpu
drivers need this check.
The alternative would be to add this check in those drivers before
every drm_dp_cec call, but it makes sense to check it in the
drm_dp_cec functions to prevent a kernel oops.
Dan Carpenter [Wed, 4 Jul 2018 09:42:50 +0000 (12:42 +0300)]
drm/virtio: fix bounds check in virtio_gpu_cmd_get_capset()
This doesn't affect runtime because in the current code "idx" is always
valid.
First, we read from "vgdev->capsets[idx].max_size" before checking
whether "idx" is within bounds. And secondly the bounds check is off by
one so we could end up reading one element beyond the end of the
vgdev->capsets[] array.
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.
drm/virtio: Replace ttm_bo_reference with ttm_bo_get
The function ttm_bo_get acquires a reference on a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.
projects / mirror_ubuntu-eoan-kernel.git / log