Masahiro Yamada [Tue, 11 Dec 2018 11:00:48 +0000 (20:00 +0900)]
kconfig: refactor pattern matching in STRING state
Here, similar matching patters are duplicated in order to look ahead
the '\n' character. If the next character is '\n', the lexer returns
T_WORD_QUOTE because it must be prepared to return T_EOL at the next
match.
Use unput('\n') trick to reduce the code duplication.
Masahiro Yamada [Tue, 11 Dec 2018 11:00:46 +0000 (20:00 +0900)]
kconfig: require T_EOL to reduce visible statement
All line-oriented statements should be reduced when seeing a T_EOL
token. I guess missing T_EOL for the "visible" statement is just a
mistake. This commit decreases one shift/reduce conflict.
Masahiro Yamada [Tue, 11 Dec 2018 11:00:45 +0000 (20:00 +0900)]
kconfig: fix memory leak when EOF is encountered in quotation
An unterminated string literal followed by new line is passed to the
parser (with "multi-line strings not supported" warning shown), then
handled properly there.
On the other hand, an unterminated string literal at end of file is
never passed to the parser, then results in memory leak.
Masahiro Yamada [Tue, 11 Dec 2018 11:00:44 +0000 (20:00 +0900)]
kconfig: fix file name and line number of warn_ignored_character()
Currently, warn_ignore_character() displays invalid file name and
line number.
The lexer should use current_file->name and yylineno, while the parser
should use zconf_curname() and zconf_lineno().
This difference comes from that the lexer is always going ahead
of the parser. The parser needs to look ahead one token to make a
shift/reduce decision, so the lexer is requested to scan more text
from the input file.
This commit fixes the warning message from warn_ignored_character().
[Test Code]
----(Kconfig begin)----
/
-----(Kconfig end)-----
[Output]
Before the fix:
<none>:0:warning: ignoring unsupported character '/'
After the fix:
Kconfig:1:warning: ignoring unsupported character '/'
Masahiro Yamada [Fri, 30 Nov 2018 09:15:52 +0000 (18:15 +0900)]
kconfig: remove k_invalid from expr_parse_string() return type
The only possibility of k_invalid being returned was when
expr_parse_sting() parsed S_OTHER type symbol. This actually never
happened, and this is even clearer since S_OTHER has gone.
Masahiro Yamada [Fri, 30 Nov 2018 09:15:51 +0000 (18:15 +0900)]
kconfig: remove S_OTHER symbol type and correct dependency tracking
The S_OTHER type could be set only when conf_read_simple() is reading
include/config/auto.conf file.
For example, CONFIG_FOO=y exists in include/config/auto.conf but it is
missing from the currently parsed Kconfig files, sym_lookup() allocates
a new symbol, and sets its type to S_OTHER.
Strangely, it will be set to S_STRING by conf_set_sym_val() a few lines
below while it is obviously bool or tristate type. On the other hand,
when CONFIG_BAR="bar" is being dropped from include/config/auto.conf,
its type remains S_OTHER. Because for_all_symbols() omits S_OTHER
symbols, conf_touch_deps() misses to touch include/config/bar.h
This behavior has been a pretty mystery for me, and digging the git
histroy did not help. At least, touching depfiles is broken for string
type symbols.
I removed S_OTHER entirely, and reimplemented it more simply.
If CONFIG_FOO was visible in the previous syncconfig, but is missing
now, what we want to do is quite simple; just call conf_touch_dep()
to touch include/config/foo.h instead of allocating a new symbol data.
Masahiro Yamada [Fri, 30 Nov 2018 09:15:49 +0000 (18:15 +0900)]
kconfig: rename conf_split_config() to conf_touch_deps()
According to commit 2e3646e51b2d ("kconfig: integrate split config
into silentoldconfig"), this function was named after split-include
tool, which used to exist in old versions of Linux.
Setting aside the historical reason, rename it into a more intuitive
name. This function touches timestamp files under include/config/
in order to interact with the fixdep tool.
Anders Roxell [Mon, 12 Nov 2018 08:38:55 +0000 (09:38 +0100)]
scripts/kconfig/merge_config: don't redefine 'y' to 'm'
In today's merge_config.sh the order of the config fragment files dictates
the output of a config option. With this approach we will get different
.config files depending on the order of the config fragment files.
So doing something like:
$ ./merge/kconfig/merge_config.sh selftest.config drm.config
Where selftest.config defines DRM=y and drm.config defines DRM=m, the
result will be "DRM=m".
Rework to add a switch to get builtin '=y' precedence over modules '=m',
this will result in "DRM=y". If we do something like this:
Pull networking fixes from David Miller:
"One last pull request before heading to Vancouver for LPC, here we have:
1) Don't forget to free VSI contexts during ice driver unload, from
Victor Raj.
2) Don't forget napi delete calls during device remove in ice driver,
from Dave Ertman.
3) Don't request VLAN tag insertion of ibmvnic device when SKB
doesn't have VLAN tags at all.
4) IPV4 frag handling code has to accomodate the situation where two
threads try to insert the same fragment into the hash table at the
same time. From Eric Dumazet.
5) Relatedly, don't flow separate on protocol ports for fragmented
frames, also from Eric Dumazet.
6) Memory leaks in qed driver, from Denis Bolotin.
7) Correct valid MTU range in smsc95xx driver, from Stefan Wahren.
8) Validate cls_flower nested policies properly, from Jakub Kicinski.
9) Clearing of stats counters in mc88e6xxx driver doesn't retain
important bits in the G1_STATS_OP register causing the chip to
hang. Fix from Andrew Lunn"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
act_mirred: clear skb->tstamp on redirect
net: dsa: mv88e6xxx: Fix clearing of stats counters
tipc: fix link re-establish failure
net: sched: cls_flower: validate nested enc_opts_policy to avoid warning
net: mvneta: correct typo
flow_dissector: do not dissect l4 ports for fragments
net: qualcomm: rmnet: Fix incorrect assignment of real_dev
net: aquantia: allow rx checksum offload configuration
net: aquantia: invalid checksumm offload implementation
net: aquantia: fixed enable unicast on 32 macvlan
net: aquantia: fix potential IOMMU fault after driver unbind
net: aquantia: synchronized flow control between mac/phy
net: smsc95xx: Fix MTU range
net: stmmac: Fix RX packet size > 8191
qed: Fix potential memory corruption
qed: Fix SPQ entries not returned to pool in error flows
qed: Fix blocking/unlimited SPQ entries leak
qed: Fix memory/entry leak in qed_init_sp_request()
inet: frags: better deal with smp races
net: hns3: bugfix for not checking return value
...
Linus Torvalds [Sun, 11 Nov 2018 22:57:55 +0000 (16:57 -0600)]
Merge tag 'kbuild-fixes-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix build errors in binrpm-pkg and bindeb-pkg targets
- fix false positive matches in merge_config.sh
- fix build version mismatch in deb-pkg target
- fix dtbs_install handling in (bin)deb-pkg target
- revert a commit that allows setlocalversion to write to source tree
* tag 'kbuild-fixes-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
builddeb: Fix inclusion of dtbs in debian package
Revert "scripts/setlocalversion: git: Make -dirty check more robust"
kbuild: deb-pkg: fix too low build version number
kconfig: merge_config: avoid false positive matches from comment lines
kbuild: deb-pkg: fix bindeb-pkg breakage when O= is used
kbuild: rpm-pkg: fix binrpm-pkg breakage when O= is used
Linus Torvalds [Sun, 11 Nov 2018 22:54:38 +0000 (16:54 -0600)]
Merge tag 'for-4.20-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Several fixes to recent release (4.19, fixes tagged for stable) and
other fixes"
* tag 'for-4.20-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix missing delayed iputs on unmount
Btrfs: fix data corruption due to cloning of eof block
Btrfs: fix infinite loop on inode eviction after deduplication of eof block
Btrfs: fix deadlock on tree root leaf when finding free extent
btrfs: avoid link error with CONFIG_NO_AUTO_INLINE
btrfs: tree-checker: Fix misleading group system information
Btrfs: fix missing data checksums after a ranged fsync (msync)
btrfs: fix pinned underflow after transaction aborted
Btrfs: fix cur_offset in the error case for nocow
Linus Torvalds [Sun, 11 Nov 2018 22:53:02 +0000 (16:53 -0600)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A large number of ext4 bug fixes, mostly buffer and memory leaks on
error return cleanup paths"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: missing !bh check in ext4_xattr_inode_write()
ext4: fix buffer leak in __ext4_read_dirblock() on error path
ext4: fix buffer leak in ext4_expand_extra_isize_ea() on error path
ext4: fix buffer leak in ext4_xattr_move_to_block() on error path
ext4: release bs.bh before re-using in ext4_xattr_block_find()
ext4: fix buffer leak in ext4_xattr_get_block() on error path
ext4: fix possible leak of s_journal_flag_rwsem in error path
ext4: fix possible leak of sbi->s_group_desc_leak in error path
ext4: remove unneeded brelse call in ext4_xattr_inode_update_ref()
ext4: avoid possible double brelse() in add_new_gdb() on error path
ext4: avoid buffer leak in ext4_orphan_add() after prior errors
ext4: avoid buffer leak on shutdown in ext4_mark_iloc_dirty()
ext4: fix possible inode leak in the retry loop of ext4_resize_fs()
ext4: fix missing cleanup if ext4_alloc_flex_bg_array() fails while resizing
ext4: add missing brelse() update_backups()'s error path
ext4: add missing brelse() add_new_gdb_meta_bg()'s error path
ext4: add missing brelse() in set_flexbg_block_bitmap()'s error path
ext4: avoid potential extra brelse in setup_new_flex_group_blocks()
Linus Torvalds [Sun, 11 Nov 2018 22:41:50 +0000 (16:41 -0600)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes:
- Cure the LDT remapping to user space on 5 level paging which ended
up in the KASLR space
- Remove LDT mapping before freeing the LDT pages
- Make NFIT MCE handling more robust
- Unbreak the VSMP build by removing the dependency on paravirt ops
- Support broken PIT emulation on Microsoft hyperV
- Don't trace vmware_sched_clock() to avoid tracer recursion
- Remove -pipe from KBUILD CFLAGS which breaks clang and is also
slower on GCC
- Trivial coding style and typo fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/vmware: Do not trace vmware_sched_clock()
x86/vsmp: Remove dependency on pv_irq_ops
x86/ldt: Remove unused variable in map_ldt_struct()
x86/ldt: Unmap PTEs for the slot before freeing LDT pages
x86/mm: Move LDT remap out of KASLR region on 5-level paging
acpi/nfit, x86/mce: Validate a MCE's address before using it
acpi/nfit, x86/mce: Handle only uncorrectable machine checks
x86/build: Remove -pipe from KBUILD_CFLAGS
x86/hyper-v: Fix indentation in hv_do_fast_hypercall16()
Documentation/x86: Fix typo in zero-page.txt
x86/hyper-v: Enable PIT shutdown quirk
clockevents/drivers/i8253: Add support for PIT shutdown quirk
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Do not zero sample_id_all for group members
perf tools: Fix undefined symbol scnprintf in libperf-jvmti.so
perf beauty: Use SRCARCH, ARCH=x86_64 must map to "x86" to find the headers
perf intel-pt: Add MTC and CYC timestamps to debug log
perf intel-pt: Add more event information to debug log
perf scripts python: exported-sql-viewer.py: Fix table find when table re-ordered
perf scripts python: exported-sql-viewer.py: Add help window
perf scripts python: exported-sql-viewer.py: Add Selected branches report
perf scripts python: exported-sql-viewer.py: Fall back to /usr/local/lib/libxed.so
perf top: Display the LBR stats in callchain entry
perf stat: Handle different PMU names with common prefix
perf record: Support weak groups
perf evlist: Move perf_evsel__reset_weak_group into evlist
perf augmented_syscalls: Start collecting pathnames in the BPF program
perf trace: Fix setting of augmented payload when using eBPF + raw_syscalls
perf trace: When augmenting raw_syscalls plug raw_syscalls:sys_exit too
perf examples bpf: Start augmenting raw_syscalls:sys_{start,exit}
tools headers barrier: Fix arm64 tools build failure wrt smp_load_{acquire,release}
Linus Torvalds [Sun, 11 Nov 2018 22:33:00 +0000 (16:33 -0600)]
Merge branch 'sched/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Two small scheduler fixes:
- Take hotplug lock in sched_init_smp(). Technically not really
required, but lockdep will complain other.
- Trivial comment fix in sched/fair"
* 'sched/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix a comment in task_numa_fault()
sched/core: Take the hotplug lock in sched_init_smp()
Eric Dumazet [Sun, 11 Nov 2018 00:22:29 +0000 (16:22 -0800)]
act_mirred: clear skb->tstamp on redirect
If sch_fq is used at ingress, skbs that might have been
timestamped by net_timestamp_set() if a packet capture
is requesting timestamps could be delayed by arbitrary
amount of time, since sch_fq time base is MONOTONIC.
Fix this problem by moving code from sch_netem.c to act_mirred.c.
Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sat, 10 Nov 2018 23:41:10 +0000 (00:41 +0100)]
net: dsa: mv88e6xxx: Fix clearing of stats counters
The mv88e6161 would sometime fail to probe with a timeout waiting for
the switch to complete an operation. This operation is supposed to
clear the statistics counters. However, due to a read/modify/write,
without the needed mask, the operation actually carried out was more
random, with invalid parameters, resulting in the switch not
responding. We need to preserve the histogram mode bits, so apply a
mask to keep them.
Reported-by: Chris Healy <Chris.Healy@zii.aero> Fixes: 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Sat, 10 Nov 2018 22:30:24 +0000 (17:30 -0500)]
tipc: fix link re-establish failure
When a link failure is detected locally, the link is reset, the flag
link->in_session is set to false, and a RESET_MSG with the 'stopping'
bit set is sent to the peer.
The purpose of this bit is to inform the peer that this endpoint just
is going down, and that the peer should handle the reception of this
particular RESET message as a local failure. This forces the peer to
accept another RESET or ACTIVATE message from this endpoint before it
can re-establish the link. This again is necessary to ensure that
link session numbers are properly exchanged before the link comes up
again.
If a failure is detected locally at the same time at the peer endpoint
this will do the same, which is also a correct behavior.
However, when receiving such messages, the endpoints will not
distinguish between 'stopping' RESETs and ordinary ones when it comes
to updating session numbers. Both endpoints will copy the received
session number and set their 'in_session' flags to true at the
reception, while they are still expecting another RESET from the
peer before they can go ahead and re-establish. This is contradictory,
since, after applying the validation check referred to below, the
'in_session' flag will cause rejection of all such messages, and the
link will never come up again.
We now fix this by not only handling received RESET/STOPPING messages
as a local failure, but also by omitting to set a new session number
and the 'in_session' flag in such cases.
Fixes: 7ea817f4e832 ("tipc: check session number before accepting link protocol messages") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rob Herring [Wed, 7 Nov 2018 14:36:46 +0000 (08:36 -0600)]
builddeb: Fix inclusion of dtbs in debian package
Commit 37c8a5fafa3b ("kbuild: consolidate Devicetree dtb build rules")
moved the location of 'dtbs_install' target which caused dtbs to not be
installed when building debian package with 'bindeb-pkg' target. Update
the builddeb script to use the same logic that determines if there's a
'dtbs_install' target which is presence of the arch dts directory. Also,
use CONFIG_OF_EARLY_FLATTREE instead of CONFIG_OF as that's a better
indication of whether we are building dtbs.
This commit will also have the side effect of installing dtbs on any
arch that has dts files. Previously, it was dependent on whether the
arch defined 'dtbs_install'.
While git appears to be able to handle this situation, a monitored
build environment (such as the one used for Chrome OS kernel builds)
may detect it and bail out with an access violation error. On top of
that, the attempted write access suggests that git _will_ write to the
file even if a build output directory is specified. Users may have the
reasonable expectation that the source repository remains untouched in
that situation.
Fixes: 6147b1cf19651 ("scripts/setlocalversion: git: Make -dirty check more robust" Cc: Genki Sky <sky@genki.is> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Tue, 6 Nov 2018 04:18:05 +0000 (13:18 +0900)]
kbuild: deb-pkg: fix too low build version number
Since commit b41d920acff8 ("kbuild: deb-pkg: split generating packaging
and build"), the build version of the kernel contained in a deb package
is too low by 1.
Prior to the bad commit, the kernel was built first, then the number
in .version file was read out, and written into the debian control file.
Now, the debian control file is created before the kernel is actually
compiled, which is causing the version number mismatch.
Let the mkdebian script pass KBUILD_BUILD_VERSION=${revision} to require
the build system to use the specified version number.
Masahiro Yamada [Mon, 5 Nov 2018 08:19:36 +0000 (17:19 +0900)]
kconfig: merge_config: avoid false positive matches from comment lines
The current SED_CONFIG_EXP could match to comment lines in config
fragment files, especially when CONFIG_PREFIX_ is empty. For example,
Buildroot uses empty prefixing; starting symbols with BR2_ is just
convention.
Make the sed expression more robust against false positives from
comment lines. The new sed expression matches to only valid patterns.
Linus Torvalds [Sat, 10 Nov 2018 19:32:14 +0000 (13:32 -0600)]
Merge tag 'tty-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty fixes for 4.20-rc2
One of these missed the original 4.19-final release, I missed that I
hadn't done a pull request for it as it was in linux-next and my
branch for a long time, that's my fault.
The others are small, fixing some reported issues and finally fixing
the termios mess for alpha so that glibc has a chance to implement
some missing functionality that has been pending for many years now.
All of these have been in linux-next with no reported issues"
* tag 'tty-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeout
arch/alpha, termios: implement BOTHER, IBSHIFT and termios2
termios, tty/tty_baudrate.c: fix buffer overrun
vt: fix broken display when running aptitude
serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMA
Linus Torvalds [Sat, 10 Nov 2018 19:29:47 +0000 (13:29 -0600)]
Merge tag 'drm-fixes-2018-11-11' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"drm: i915, amdgpu, sun4i, exynos and etnaviv fixes:
- amdgpu has some display fixes, KFD ioctl fixes and a Vega20 bios
interaction fix.
- sun4i has some NULL checks added
- i915 has a 32-bit system fix, LPE audio oops, and HDMI2.0 clock
fixes.
- Exynos has a 3 regression fixes (one frame counter, fbdev missing,
dsi->panel check)
- Etnaviv has a single fencing fix for GPU recovery"
* tag 'drm-fixes-2018-11-11' of git://anongit.freedesktop.org/drm/drm: (39 commits)
drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder()
drm/amd/display: Drop reusing drm connector for MST
drm/amd/display: Cleanup MST non-atomic code workaround
drm/amd/powerplay: always use fast UCLK switching when UCLK DPM enabled
drm/amd/powerplay: set a default fclk/gfxclk ratio
drm/amdgpu/display/dce11: only enable FBC when selected
drm/amdgpu/display/dm: handle FBC dc feature parameter
drm/amdgpu/display/dc: add FBC to dc_config
drm/amdgpu: add DC feature mask module parameter
drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2)
drm/amdgpu/vega20: add CLK base offset
drm/amd/display: Stop leaking planes
drm/amd/display: Fix misleading buffer information
Revert "drm/amd/display: set backlight level limit to 1"
drm/amd: Update atom_smu_info_v3_3 structure
drm/i915: Fix ilk+ watermarks when disabling pipes
drm/sun4i: tcon: prevent tcon->panel dereference if NULL
drm/sun4i: tcon: fix check of tcon->panel null pointer
drm/i915: Don't oops during modeset shutdown after lpe audio deinit
drm/i915: Mark pin flags as u64
...
Linus Torvalds [Sat, 10 Nov 2018 19:27:58 +0000 (13:27 -0600)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace fixes from Eric Biederman:
"I believe all of these are simple obviously correct bug fixes. These
fall into two groups:
- Fixing the implementation of MNT_LOCKED which prevents lesser
privileged users from seeing unders mounts created by more
privileged users.
- Fixing the extended uid and group mapping in user namespaces.
As well as ensuring the code looks correct I have spot tested these
changes as well and in my testing the fixes are working"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
mount: Prevent MNT_DETACH from disconnecting locked mounts
mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts
mount: Retest MNT_LOCKED in do_umount
userns: also map extents in the reverse map to kernel IDs
Linus Torvalds [Sat, 10 Nov 2018 19:25:55 +0000 (13:25 -0600)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A small set of fixes for clk drivers.
One to fix a DT refcount imbalance, two to mark some Amlogic clks as
critical, and one final one that fixes a clk name for the Qualcomm
driver merged this cycle"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc: Fix board clock node name
clk: meson: axg: mark fdiv2 and fdiv3 as critical
clk: meson-gxbb: set fclk_div3 as CLK_IS_CRITICAL
clk: fixed-factor: fix of_node_get-put imbalance
Dave Airlie [Sat, 10 Nov 2018 18:14:22 +0000 (04:14 +1000)]
Merge tag 'drm-intel-fixes-2018-11-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Bugzilla #108282 fixed: Avoid graphics corruption on 32-bit systems for Mesa 18.2.x
Avoid OOPS on LPE audio deinit. Remove two unused W/As.
Fix to correct HDMI 2.0 audio clock modes to spec.
Jakub Kicinski [Sat, 10 Nov 2018 05:06:26 +0000 (21:06 -0800)]
net: sched: cls_flower: validate nested enc_opts_policy to avoid warning
TCA_FLOWER_KEY_ENC_OPTS and TCA_FLOWER_KEY_ENC_OPTS_MASK can only
currently contain further nested attributes, which are parsed by
hand, so the policy is never actually used resulting in a W=1
build warning:
net/sched/cls_flower.c:492:1: warning: ‘enc_opts_policy’ defined but not used [-Wunused-const-variable=]
enc_opts_policy[TCA_FLOWER_KEY_ENC_OPTS_MAX + 1] = {
Add the validation anyway to avoid potential bugs when other
attributes are added and to make the attribute structure slightly
more clear. Validation will also set extact to point to bad
attribute on error.
Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 10 Nov 2018 13:07:21 +0000 (07:07 -0600)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix occasional page fault during boot due to memblock resizing before
the linear map is up.
- Define NET_IP_ALIGN to 0 to improve the DMA performance on some
platforms.
- lib/raid6 test build fix.
- .mailmap update for Punit Agrawal
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: memblock: don't permit memblock resizing until linear mapping is up
arm64: mm: define NET_IP_ALIGN to 0
lib/raid6: Fix arm64 test build
mailmap: Update email for Punit Agrawal
Linus Torvalds [Sat, 10 Nov 2018 12:57:34 +0000 (06:57 -0600)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has one bugfix (qcom-geni driver), one arch enablement (i2c-omap
driver, no code change), and a new driver (nvidia-gpu) this time"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
usb: typec: ucsi: add support for Cypress CCGx
i2c: nvidia-gpu: make pm_ops static
i2c: add i2c bus driver for NVIDIA GPU
i2c: qcom-geni: Fix runtime PM mismatch with child devices
MAINTAINERS: Add entry for i2c-omap driver
i2c: omap: Enable for ARCH_K3
dt-bindings: i2c: omap: Add new compatible for AM654 SoCs
배석진 [Sat, 10 Nov 2018 00:53:06 +0000 (16:53 -0800)]
flow_dissector: do not dissect l4 ports for fragments
Only first fragment has the sport/dport information,
not the following ones.
If we want consistent hash for all fragments, we need to
ignore ports even for first fragment.
This bug is visible for IPv6 traffic, if incoming fragments
do not have a flow label, since skb_get_hash() will give
different results for first fragment and following ones.
It is also visible if any routing rule wants dissection
and sport or dport.
See commit 5e5d6fed3741 ("ipv6: route: dissect flow
in input path if fib rules need it") for details.
[edumazet] rewrote the changelog completely.
Fixes: 06635a35d13d ("flow_dissect: use programable dissector in skb_flow_dissect and friends") Signed-off-by: 배석진 <soukjin.bae@samsung.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: qualcomm: rmnet: Fix incorrect assignment of real_dev
A null dereference was observed when a sysctl was being set
from userspace and rmnet was stuck trying to complete some actions
in the NETDEV_REGISTER callback. This is because the real_dev is set
only after the device registration handler completes.
sysctl call stack -
<6> Unable to handle kernel NULL pointer dereference at
virtual address 00000108
<2> pc : rmnet_vnd_get_iflink+0x1c/0x28
<2> lr : dev_get_iflink+0x2c/0x40
<2> rmnet_vnd_get_iflink+0x1c/0x28
<2> inet6_fill_ifinfo+0x15c/0x234
<2> inet6_ifinfo_notify+0x68/0xd4
<2> ndisc_ifinfo_sysctl_change+0x1b8/0x234
<2> proc_sys_call_handler+0xac/0x100
<2> proc_sys_write+0x3c/0x4c
<2> __vfs_write+0x54/0x14c
<2> vfs_write+0xcc/0x188
<2> SyS_write+0x60/0xc0
<2> el0_svc_naked+0x34/0x38
RX Checksum offloads could not be configured and ignored netdev features
flag for checksumming.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Packets with marked invalid IP/UDP/TCP checksums were considered as good
by the driver. The error was in a logic, processing offload bits in
RX descriptor.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 9 Nov 2018 11:53:59 +0000 (11:53 +0000)]
net: aquantia: fixed enable unicast on 32 macvlan
Fixed a condition mistake due to which macvlans unicast
item number 32 was not added in the unicast filter.
The consequence is that when exactly 32 macvlans are created
on NIC, the last created macvlan receives no traffic because
its MAC was not registered in HW.
Fixes: 94b3b542303f ("net: aquantia: vlan unicast address list correct handling") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Tested-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bogdanov [Fri, 9 Nov 2018 11:53:57 +0000 (11:53 +0000)]
net: aquantia: fix potential IOMMU fault after driver unbind
IOMMU fault may occurr on unbind/bind or if_down/if_up sequence.
Although driver disables the rings on down, this is not enough.
Due to internal HW design, during subsequent initialization
NIC sometimes may reuse RX descriptors cache and write to the
host memory from the descriptor cache.
That's get catched by IOMMU on host.
This patch invalidates the descriptor cache in NIC on interface down
to prevent writing to the cached descriptors and to the memory pointed
in those descriptors.
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 9 Nov 2018 11:53:56 +0000 (11:53 +0000)]
net: aquantia: synchronized flow control between mac/phy
Flow control statuses were not synchronized between blocks,
that caused packets/link drop on some corner cases, when
MAC sent PFC although Phy was not expecting these to come.
Driver should readout the negotiated FC from phy and
configure RX block accordigly.
This is done on each link change event with information from FW.
Fixes: 288551de45aa ("net: aquantia: Implement rx/tx flow control ethtools callback") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 9 Nov 2018 22:41:58 +0000 (16:41 -0600)]
Merge tag 'devicetree-fixes-for-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree fixes from Rob Herring:
- Add validation of NUMA distance map to prevent crashes with bad map
- Fix setting of dma_mask
* tag 'devicetree-fixes-for-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of, numa: Validate some distance map rules
of/device: Really only set bus DMA mask when appropriate
Linus Torvalds [Fri, 9 Nov 2018 22:31:51 +0000 (16:31 -0600)]
Merge tag 'for-linus-20181109' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
- Two fixes for an ubd regression, one for missing locking, and one for
a missing initialization of a field. The latter was an old latent
bug, but it's now visible and triggers (Me, Anton Ivanov)
- Set of NVMe fixes via Christoph, but applied manually due to a git
tree mixup (Christoph, Sagi)
- Fix for a discard split regression, in three patches (Ming)
- Update libata git trees (Geert)
- SPDX identifier for sata_rcar (Kuninori Morimoto)
- Virtual boundary merge fix (Johannes)
- Preemptively clear memory we are going to pass to userspace, in case
the driver does a short read (Keith)
* tag 'for-linus-20181109' of git://git.kernel.dk/linux-block:
block: make sure writesame bio is aligned with logical block size
block: cleanup __blkdev_issue_discard()
block: make sure discard bio is aligned with logical block size
Revert "nvmet-rdma: use a private workqueue for delete"
nvme: make sure ns head inherits underlying device limits
nvmet: don't try to add ns to p2p map unless it actually uses it
sata_rcar: convert to SPDX identifiers
ubd: fix missing initialization of io_req
block: Clear kernel memory before copying to user
MAINTAINERS: Fix remaining pointers to obsolete libata.git
ubd: fix missing lock around request issue
block: respect virtual boundary mask in bvecs
Linus Torvalds [Fri, 9 Nov 2018 22:26:18 +0000 (16:26 -0600)]
Merge tag 'ceph-for-4.20-rc2' of https://github.com/ceph/ceph-client
Pull Ceph fixes from Ilya Dryomov:
"Two CephFS fixes (copy_file_range and quota) and a small feature bit
cleanup"
* tag 'ceph-for-4.20-rc2' of https://github.com/ceph/ceph-client:
libceph: assume argonaut on the server side
ceph: quota: fix null pointer dereference in quota check
ceph: add destination file data sync before doing any remote copy
Linus Torvalds [Fri, 9 Nov 2018 22:21:24 +0000 (16:21 -0600)]
Merge tag 'mips_fixes_4.20_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A couple of small MIPS fixes for 4.20:
- Extend an array to avoid overruns on some Octeon hardware, fixing a
bug introduced in 4.3.
- Fix a coherent DMA regression for systems without cache-coherent
DMA introduced in the 4.20 merge window"
* tag 'mips_fixes_4.20_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix `dma_alloc_coherent' returning a non-coherent allocation
MIPS: OCTEON: fix out of bounds array access on CN68XX
When running function tracing on a Linux guest running on VMware
Workstation, the guest would crash. This is due to tracing of the
sched_clock internal call of the VMware vmware_sched_clock(), which
causes an infinite recursion within the tracing code (clock calls must
not be traced).
Make vmware_sched_clock() not traced by ftrace.
Fixes: 80e9a4f21fd7c ("x86/vmware: Add paravirt sched clock") Reported-by: GwanYeong Kim <gy741.kim@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Alok Kataria <akataria@vmware.com> CC: GwanYeong Kim <gy741.kim@gmail.com> CC: "H. Peter Anvin" <hpa@zytor.com> CC: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org CC: Thomas Gleixner <tglx@linutronix.de> CC: virtualization@lists.linux-foundation.org CC: x86-ml <x86@kernel.org> Link: http://lkml.kernel.org/r/20181109152207.4d3e7d70@gandalf.local.home
serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeout
This patch fixes an issue that the sci_remove() could not remove
dev_attr_rx_fifo_timeout because uart_remove_one_port() set
the port->port.type to PORT_UNKNOWN.
Vasily Averin [Fri, 9 Nov 2018 16:34:40 +0000 (11:34 -0500)]
ext4: missing !bh check in ext4_xattr_inode_write()
According to Ted Ts'o ext4_getblk() called in ext4_xattr_inode_write()
should not return bh = NULL
The only time that bh could be NULL, then, would be in the case of
something really going wrong; a programming error elsewhere (perhaps a
wild pointer dereference) or I/O error causing on-disk file system
corruption (although that would be highly unlikely given that we had
*just* allocated the blocks and so the metadata blocks in question
probably would still be in the cache).
Stephen Boyd [Fri, 2 Nov 2018 20:57:32 +0000 (13:57 -0700)]
i2c: qcom-geni: Fix runtime PM mismatch with child devices
We need to enable runtime PM on this i2c controller before populating
child devices with i2c_add_adapter(). Otherwise, if a child device uses
runtime PM and stays runtime PM enabled we'll get the following warning
at boot.
Enabling runtime PM for inactive device (a98000.i2c) with active children
Let's move the runtime PM enabling and setup to before we add the
adapter, so that this device can respond to runtime PM requests from
children.
Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Vignesh R [Fri, 9 Nov 2018 11:14:10 +0000 (16:44 +0530)]
dt-bindings: i2c: omap: Add new compatible for AM654 SoCs
AM654 SoCs have same I2C IP as OMAP SoCs. Add new compatible to
handle AM654 SoCs. While at that reformat the existing compatible list
for older SoCs to list one valid compatible per line.
Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Juergen Gross [Thu, 1 Nov 2018 12:33:07 +0000 (13:33 +0100)]
xen: remove size limit of privcmd-buf mapping interface
Currently the size of hypercall buffers allocated via
/dev/xen/hypercall is limited to a default of 64 memory pages. For live
migration of guests this might be too small as the page dirty bitmask
needs to be sized according to the size of the guest. This means
migrating a 8GB sized guest is already exhausting the default buffer
size for the dirty bitmap.
There is no sensible way to set a sane limit, so just remove it
completely. The device node's usage is limited to root anyway, so there
is no additional DOS scenario added by allowing unlimited buffers.
While at it make the error path for the -ENOMEM case a little bit
cleaner by setting n_pages to the number of successfully allocated
pages instead of the target size.
Juergen Gross [Thu, 8 Nov 2018 07:35:06 +0000 (08:35 +0100)]
xen: fix xen_qlock_wait()
Commit a856531951dc80 ("xen: make xen_qlock_wait() nestable")
introduced a regression for Xen guests running fully virtualized
(HVM or PVH mode). The Xen hypervisor wouldn't return from the poll
hypercall with interrupts disabled in case of an interrupt (for PV
guests it does).
So instead of disabling interrupts in xen_qlock_wait() use a nesting
counter to avoid calling xen_clear_irq_pending() in case
xen_qlock_wait() is nested.
Sagi Grimberg [Fri, 2 Nov 2018 18:22:13 +0000 (11:22 -0700)]
nvme: make sure ns head inherits underlying device limits
Whenever we update ns_head info, we need to make sure it is still
compatible with all underlying backing devices because although nvme
multipath doesn't have any explicit use of these limits, other devices
can still be stacked on top of it which may rely on the underlying limits.
Start with unlimited stacking limits, and every info update iterate over
siblings and adjust queue limits.
Linus Torvalds [Fri, 9 Nov 2018 12:30:44 +0000 (06:30 -0600)]
Merge tag 's390-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- A fix for the pgtable_bytes misaccounting on s390. The patch changes
common code part in regard to page table folding and adds extra
checks to mm_[inc|dec]_nr_[pmds|puds].
- Add FORCE for all build targets using if_changed
- Use non-loadable phdr for the .vmlinux.info section to avoid a
segment overlap that confuses kexec
- Cleanup the attribute definition for the diagnostic sampling
- Increase stack size for CONFIG_KASAN=y builds
- Export __node_distance to fix a build error
- Correct return code of a PMU event init function
- An update for the default configs
* tag 's390-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/perf: Change CPUM_CF return code in event init function
s390: update defconfigs
s390/mm: Fix ERROR: "__node_distance" undefined!
s390/kasan: increase instrumented stack size to 64k
s390/cpum_sf: Rework attribute definition for diagnostic sampling
s390/mm: fix mis-accounting of pgtable_bytes
mm: add mm_pxd_folded checks to pgtable_bytes accounting functions
mm: introduce mm_[p4d|pud|pmd]_folded
mm: make the __PAGETABLE_PxD_FOLDED defines non-empty
s390: avoid vmlinux segments overlap
s390/vdso: add missing FORCE to build targets
s390/decompressor: add missing FORCE to build targets
Juergen Gross [Wed, 7 Nov 2018 17:01:00 +0000 (18:01 +0100)]
x86/xen: fix pv boot
Commit 9da3f2b7405440 ("x86/fault: BUG() when uaccess helpers fault on
kernel addresses") introduced a regression for booting Xen PV guests.
Xen PV guests are using __put_user() and __get_user() for accessing the
p2m map (physical to machine frame number map) as accesses might fail
in case of not populated areas of the map.
With above commit using __put_user() and __get_user() for accessing
kernel pages is no longer valid. So replace the Xen hack by adding
appropriate p2m access functions using the default fixup handler.
Fixes: 9da3f2b7405440 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
Stefan Wahren [Thu, 8 Nov 2018 19:38:26 +0000 (20:38 +0100)]
net: smsc95xx: Fix MTU range
The commit f77f0aee4da4 ("net: use core MTU range checking in USB NIC
drivers") introduce a common MTU handling for usbnet. But it's missing
the necessary changes for smsc95xx. So set the MTU range accordingly.
This patch has been tested on a Raspberry Pi 3.
Fixes: f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tested on SoCFPGA Stratix10 with ping sweep from 100 to 8300 byte packets.
Fixes: 286a83721720 ("stmmac: add CHAINED descriptor mode support (V4)") Suggested-by: Jose Abreu <jose.abreu@synopsys.com> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch series fixes several bugs in the SPQ mechanism.
It deals with SPQ entries management, preventing resource leaks, memory
corruptions and handles error cases throughout the driver.
Please consider applying to net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sagiv Ozeri [Thu, 8 Nov 2018 14:46:11 +0000 (16:46 +0200)]
qed: Fix potential memory corruption
A stuck ramrod should be deleted from the completion_pending list,
otherwise it will be added again in the future and corrupt the list.
Return error value to inform that ramrod is stuck and should be deleted.
Signed-off-by: Sagiv Ozeri <sagiv.ozeri@cavium.com> Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Bolotin [Thu, 8 Nov 2018 14:46:10 +0000 (16:46 +0200)]
qed: Fix SPQ entries not returned to pool in error flows
qed_sp_destroy_request() API was added for SPQ users that need to
free/return the entry they acquired in their error flows.
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Bolotin [Thu, 8 Nov 2018 14:46:09 +0000 (16:46 +0200)]
qed: Fix blocking/unlimited SPQ entries leak
When there are no SPQ entries left in the free_pool, new entries are
allocated and are added to the unlimited list. When an entry in the pool
is available, the content is copied from the original entry, and the new
entry is sent to the device. qed_spq_post() is not aware of that, so the
additional entry is stored in the original entry as p_post_ent, which can
later be returned to the pool.
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Bolotin [Thu, 8 Nov 2018 14:46:08 +0000 (16:46 +0200)]
qed: Fix memory/entry leak in qed_init_sp_request()
Free the allocated SPQ entry or return the acquired SPQ entry to the free
list in error flows.
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 9 Nov 2018 01:34:27 +0000 (17:34 -0800)]
inet: frags: better deal with smp races
Multiple cpus might attempt to insert a new fragment in rhashtable,
if for example RPS is buggy, as reported by 배석진 in
https://patchwork.ozlabs.org/patch/994601/
We use rhashtable_lookup_get_insert_key() instead of
rhashtable_insert_fast() to let cpus losing the race
free their own inet_frag_queue and use the one that
was inserted by another cpu.
Fixes: 648700f76b03 ("inet: frags: use rhashtables for reassembly units") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: 배석진 <soukjin.bae@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Thu, 8 Nov 2018 02:13:19 +0000 (10:13 +0800)]
net: hns3: bugfix for not checking return value
hns3_reset_notify_init_enet() only return error early if the return
value of hns3_restore_vlan() is not 0.
This patch adds checking for the return value of hns3_restore_vlan.
Fixes: 7fa6be4fd2f6 ("net: hns3: fix incorrect return value/type of some functions") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 8 Nov 2018 23:55:01 +0000 (17:55 -0600)]
Merge tag 'xfs-4.20-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- fix incorrect dropping of error code from bmap
- print buffer offsets instead of useless hashed pointers when dumping
corrupt metadata
- fix integer overflow in attribute verifier
* tag 'xfs-4.20-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix overflow in xfs_attr3_leaf_verify
xfs: print buffer offsets when dumping corrupt buffers
xfs: Fix error code in 'xfs_ioc_getbmap()'
Linus Torvalds [Thu, 8 Nov 2018 23:49:04 +0000 (17:49 -0600)]
Merge tag 'led-fixes-for-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED fixes from Jacek Anaszewski:
"All three fixes are related to the newly added pattern trigger:
- remove mutex_lock() from timer callback, which would trigger
problems related to sleeping in atomic context, the removal is
harmless since mutex protection turned out to be redundant in this
case
- fix pattern parsing to properly handle intervals with brightness == 0
- fix typos in the ABI documentation"
* tag 'led-fixes-for-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
Documentation: ABI: led-trigger-pattern: Fix typos
leds: trigger: Fix sleeping function called from invalid context
Fix pattern handling optimalization
Linus Torvalds [Thu, 8 Nov 2018 23:45:42 +0000 (17:45 -0600)]
Merge tag 'sound-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Two small regression fixes for HD-audio: one about vga_switcheroo and
runtime PM, and another about Oops on some Thinkpads"
* tag 'sound-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix incorrect clearance of thinkpad_acpi hooks
vga_switcheroo: Fix missing gpu_bound call at audio client registration
John Garry [Thu, 8 Nov 2018 10:17:03 +0000 (18:17 +0800)]
of, numa: Validate some distance map rules
Currently the NUMA distance map parsing does not validate the distance
table for the distance-matrix rules 1-2 in [1].
However the arch NUMA code may enforce some of these rules, but not all.
Such is the case for the arm64 port, which does not enforce the rule that
the distance between separates nodes cannot equal LOCAL_DISTANCE.
The patch adds the following rules validation:
- distance of node to self equals LOCAL_DISTANCE
- distance of separate nodes > LOCAL_DISTANCE
This change avoids a yet-unresolved crash reported in [2].
A note on dealing with symmetrical distances between nodes:
Validating symmetrical distances between nodes is difficult. If it were
mandated in the bindings that every distance must be recorded in the
table, then it would be easy. However, it isn't.
In addition to this, it is also possible to record [b, a] distance only
(and not [a, b]). So, when processing the table for [b, a], we cannot
assert that current distance of [a, b] != [b, a] as invalid, as [a, b]
distance may not be present in the table and current distance would be
default at REMOTE_DISTANCE.
As such, we maintain the policy that we overwrite distance [a, b] = [b, a]
for b > a. This policy is different to kernel ACPI SLIT validation, which
allows non-symmetrical distances (ACPI spec SLIT rules allow it). However,
the distance debug message is dropped as it may be misleading (for a distance
which is later overwritten).
Some final notes on semantics:
- It is implied that it is the responsibility of the arch NUMA code to
reset the NUMA distance map for an error in distance map parsing.
- It is the responsibility of the FW NUMA topology parsing (whether OF or
ACPI) to enforce NUMA distance rules, and not arch NUMA code.
Robin Murphy [Wed, 7 Nov 2018 16:30:32 +0000 (16:30 +0000)]
of/device: Really only set bus DMA mask when appropriate
of_dma_configure() was *supposed* to be following the same logic as
acpi_dma_configure() and only setting bus_dma_mask if some range was
specified by the firmware. However, it seems that subtlety got lost in
the process of fitting it into the differently-shaped control flow, and
as a result the force_dma==true case ends up always setting the bus mask
to the 32-bit default, which is not what anyone wants.
Make sure we only touch it if the DT actually said so.
Fixes: 6c2fb2ea7636 ("of/device: Set bus DMA mask as appropriate") Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reported-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: John Stultz <john.stultz@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Robert Richter <robert.richter@cavium.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
Jerome Brunet [Thu, 8 Nov 2018 09:31:23 +0000 (10:31 +0100)]
clk: meson: axg: mark fdiv2 and fdiv3 as critical
Similar to gxbb and gxl platforms, axg SCPI Cortex-M co-processor
uses the fdiv2 and fdiv3 to, among other things, provide the cpu
clock.
Until clock hand-off mechanism makes its way to CCF and the generic
SCPI claims platform specific clocks, these clocks must be marked as
critical to make sure they are never disabled when needed by the
co-processor.
Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
On the Khadas VIM2 (GXM) and LePotato (GXL) board there are problems
with reboot; e.g. a ~60 second delay between issuing reboot and the
board power cycling (and in some OS configurations reboot will fail
and require manual power cycling).
Similar to 'commit c987ac6f1f088663b6dad39281071aeb31d450a8 ("clk:
meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL")' the SCPI Cortex-M4
Co-Processor seems to depend on FCLK_DIV3 being operational.
We don't have precise documentation about the SCPI Co-Processor and
its clock requirement so we are learning things the hard way.
Marking this clock as critical solves the problem but it should not
be viewed as final solution. Ideally, the SCPI driver should claim
these clocks. We also depends on some clock hand-off mechanism
making its way to CCF, to make sure the clock stays on between its
registration and the SCPI driver probe.
Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This is caused by the fact that we permit memblock resizing before the
linear mapping is up, and so the memblock_reserved() array is moved
into memory that is not mapped yet.
So let's ensure that this crash can no longer occur, by deferring to
call to memblock_allow_resize() to after the linear mapping has been
created.
Reported-by: Bhupesh Sharma <bhsharma@redhat.com> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ilya Dryomov [Thu, 8 Nov 2018 13:55:21 +0000 (14:55 +0100)]
libceph: assume argonaut on the server side
No one is running pre-argonaut. In addition one of the argonaut
features (NOSRCADDR) has been required since day one (and a half,
2.6.34 vs 2.6.35) of the kernel client.
Allow for the possibility of reusing these feature bits later.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
Luis Henriques [Tue, 23 Oct 2018 16:53:14 +0000 (16:53 +0000)]
ceph: add destination file data sync before doing any remote copy
If we try to copy into a file that was just written, any data that is
remote copied will be overwritten by our buffered writes once they are
flushed. When this happens, the call to invalidate_inode_pages2_range
will also return a -EBUSY error.
This patch fixes this by also sync'ing the destination file before
starting any copy.
Fixes: 503f82a9932d ("ceph: support copy_file_range file operation") Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Anton Ivanov [Thu, 8 Nov 2018 13:07:23 +0000 (13:07 +0000)]
ubd: fix missing initialization of io_req
The SYNC path doesn't initialize io_req->error, which can cause
random errors. Before the conversion to blk-mq, we always
completed requests with BLK_STS_OK status, but now we actually
look at the error field and this issue becomes apparent.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
[axboe: fixed up commit message to explain what is actually going on]
arch/alpha, termios: implement BOTHER, IBSHIFT and termios2
Alpha has had c_ispeed and c_ospeed, but still set speeds in c_cflags
using arbitrary flags. Because BOTHER is not defined, the general
Linux code doesn't allow setting arbitrary baud rates, and because
CBAUDEX == 0, we can have an array overrun of the baud_rate[] table in
drivers/tty/tty_baudrate.c if (c_cflags & CBAUD) == 037.
Resolve both problems by #defining BOTHER to 037 on Alpha.
However, userspace still needs to know if setting BOTHER is actually
safe given legacy kernels (does anyone actually care about that on
Alpha anymore?), so enable the TCGETS2/TCSETS*2 ioctls on Alpha, even
though they use the same structure. Define struct termios2 just for
compatibility; it is the exact same structure as struct termios. In a
future patchset, this will be cleaned up so the uapi headers are
usable from libc.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: <linux-alpha@vger.kernel.org> Cc: <linux-serial@vger.kernel.org> Cc: Johan Hovold <johan@kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Thu, 8 Nov 2018 12:06:58 +0000 (07:06 -0500)]
Merge tag 'compiler-attributes-for-linus-v4.20-rc2' of https://github.com/ojeda/linux
Pull compiler attribute fixlets from Miguel Ojeda:
"Small improvements to Compiler Attributes:
- Define asm_volatile_goto for non-gcc compilers (Nick Desaulniers)
- Improve the explanation of compiler_attributes.h"
* tag 'compiler-attributes-for-linus-v4.20-rc2' of https://github.com/ojeda/linux:
Compiler Attributes: improve explanation of header
include/linux/compiler*.h: define asm_volatile_goto
Linus Torvalds [Thu, 8 Nov 2018 12:04:29 +0000 (07:04 -0500)]
Merge tag 'mtd/fixes-for-4.20-rc2' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Boris Brezillon:
"MTD changes:
- Kill a VLA in sa1100
SPI NOR changes:
- Make sure ->addr_width is restored when SFDP parsing fails
- Propate errors happening in cqspi_direct_read_execute()
NAND changes:
- Fix kernel-doc mismatch
- Fix nanddev_neraseblocks() to return the correct value
- Avoid selection of BCH_CONST_PARAMS when some users require dynamic
BCH settings"
* tag 'mtd/fixes-for-4.20-rc2' of git://git.infradead.org/linux-mtd:
mtd: nand: Fix nanddev_pos_next_page() kernel-doc header
mtd: sa1100: avoid VLA in sa1100_setup_mtd
mtd: spi-nor: Reset nor->addr_width when SFDP parsing failed
mtd: spi-nor: cadence-quadspi: Return error code in cqspi_direct_read_execute()
mtd: nand: Fix nanddev_neraseblocks()
mtd: nand: drop kernel-doc notation for a deleted function parameter
mtd: docg3: don't set conflicting BCH_CONST_PARAMS option
projects / mirror_ubuntu-disco-kernel.git / log