watchdog: scx200_wdt: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: i386):
drivers/watchdog/scx200_wdt.c: In function ‘scx200_wdt_ioctl’:
drivers/watchdog/scx200_wdt.c:188:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
scx200_wdt_ping();
^~~~~~~~~~~~~~~~~
drivers/watchdog/scx200_wdt.c:189:2: note: here
case WDIOC_GETTIMEOUT:
^~~~
Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/watchdog/ar7_wdt.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 237:3
drivers/watchdog/pcwd.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 653:3
drivers/watchdog/sb_wdog.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 204:3
drivers/watchdog/wdt.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 391:3
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning:
arch/arm/kernel/signal.c: In function 'do_signal':
arch/arm/kernel/signal.c:598:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
restart -= 2;
~~~~~~~~^~~~
arch/arm/kernel/signal.c:599:3: note: here
case -ERESTARTNOHAND:
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
mfd: omap-usb-host: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_resume':
drivers/mfd/omap-usb-host.c:303:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (!IS_ERR(omap->hsic480m_clk[i])) {
^
drivers/mfd/omap-usb-host.c:313:3: note: here
case OMAP_EHCI_PORT_MODE_TLL:
^~~~
drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_suspend':
drivers/mfd/omap-usb-host.c:345:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (!IS_ERR(omap->hsic480m_clk[i]))
^
drivers/mfd/omap-usb-host.c:349:3: note: here
case OMAP_EHCI_PORT_MODE_TLL:
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
mfd: db8500-prcmu: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/mfd/db8500-prcmu.c: In function 'dsiclk_rate':
drivers/mfd/db8500-prcmu.c:1592:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
div *= 2;
~~~~^~~~
drivers/mfd/db8500-prcmu.c:1593:2: note: here
case PRCM_DSI_PLLOUT_SEL_PHI_2:
^~~~
drivers/mfd/db8500-prcmu.c:1594:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
div *= 2;
~~~~^~~~
drivers/mfd/db8500-prcmu.c:1595:2: note: here
case PRCM_DSI_PLLOUT_SEL_PHI:
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
ARM: OMAP: dma: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/arm/plat-omap/dma.c: In function 'omap_set_dma_src_burst_mode':
arch/arm/plat-omap/dma.c:384:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (dma_omap2plus()) {
^
arch/arm/plat-omap/dma.c:393:2: note: here
case OMAP_DMA_DATA_BURST_16:
^~~~
arch/arm/plat-omap/dma.c:394:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (dma_omap2plus()) {
^
arch/arm/plat-omap/dma.c:402:2: note: here
default:
^~~~~~~
arch/arm/plat-omap/dma.c: In function 'omap_set_dma_dest_burst_mode':
arch/arm/plat-omap/dma.c:473:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (dma_omap2plus()) {
^
arch/arm/plat-omap/dma.c:481:2: note: here
default:
^~~~~~~
Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
ARM: alignment: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/arm/mm/alignment.c: In function 'thumb2arm':
arch/arm/mm/alignment.c:688:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((tinstr & (3 << 9)) == 0x0400) {
^
arch/arm/mm/alignment.c:700:2: note: here
default:
^~~~~~~
arch/arm/mm/alignment.c: In function 'do_alignment_t32_to_handler':
arch/arm/mm/alignment.c:753:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
poffset->un = (tinst2 & 0xff) << 2;
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
arch/arm/mm/alignment.c:754:2: note: here
case 0xe940:
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning:
arch/arm/mach-tegra/reset.c: In function 'tegra_cpu_reset_handler_enable':
arch/arm/mach-tegra/reset.c:72:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
tegra_cpu_reset_handler_set(reset_address);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-tegra/reset.c:74:2: note: here
case 0:
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
ARM/hw_breakpoint: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_arch_parse':
arch/arm/kernel/hw_breakpoint.c:609:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2)
^
arch/arm/kernel/hw_breakpoint.c:611:2: note: here
case 3:
^~~~
arch/arm/kernel/hw_breakpoint.c:613:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1)
^
arch/arm/kernel/hw_breakpoint.c:615:2: note: here
default:
^~~~~~~
arch/arm/kernel/hw_breakpoint.c: In function 'arch_build_bp_info':
arch/arm/kernel/hw_breakpoint.c:544:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((hw->ctrl.type != ARM_BREAKPOINT_EXECUTE)
^
arch/arm/kernel/hw_breakpoint.c:547:2: note: here
default:
^~~~~~~
In file included from include/linux/kernel.h:11,
from include/linux/list.h:9,
from include/linux/preempt.h:11,
from include/linux/hardirq.h:5,
from arch/arm/kernel/hw_breakpoint.c:16:
arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_pending':
include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
# define unlikely(x) __builtin_expect(!!(x), 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~
include/asm-generic/bug.h:136:2: note: in expansion of macro 'unlikely'
unlikely(__ret_warn_on); \
^~~~~~~~
arch/arm/kernel/hw_breakpoint.c:863:3: note: in expansion of macro 'WARN'
WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
^~~~
arch/arm/kernel/hw_breakpoint.c:864:2: note: here
case ARM_ENTRY_SYNC_WATCHPOINT:
^~~~
arch/arm/kernel/hw_breakpoint.c: In function 'core_has_os_save_restore':
arch/arm/kernel/hw_breakpoint.c:910:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (oslsr & ARM_OSLSR_OSLM0)
^
arch/arm/kernel/hw_breakpoint.c:912:2: note: here
default:
^~~~~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Merge tag 'meminit-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull structleak fix from Kees Cook:
"Disable gcc-based stack variable auto-init under KASAN (Arnd
Bergmann).
This fixes a bunch of build warnings under KASAN and the
gcc-plugin-based stack auto-initialization features (which are
arguably redundant, so better to let KASAN control this)"
* tag 'meminit-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
structleak: disable STRUCTLEAK_BYREF in combination with KASAN_STACK
Merge tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.3-rc2 to resolve
some reported issues.
Nothing major at all, some binder bugfixes for issues found, some new
mei device ids, firmware building warning fixes, habanalabs fixes, a
few other build fixes, and a MAINTAINERS update.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
test_firmware: fix a memory leak bug
hpet: Fix division by zero in hpet_time_div()
eeprom: make older eeprom drivers select NVMEM_SYSFS
vmw_balloon: Remove Julien from the maintainers list
fpga-manager: altera-ps-spi: Fix build error
mei: me: add mule creek canyon (EHL) device ids
binder: prevent transactions to context manager from its own process.
binder: Set end of SG buffer area properly.
firmware: Fix missing inline
firmware: fix build errors in paged buffer handling code
habanalabs: don't reset device when getting VRHOT
habanalabs: use %pad for printing a dma_addr_t
Merge tag 'tty-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are two tty/vt fixes:
- delete the netx-serial driver as the arch has been removed, no need
to keep the serial driver for it around either.
- vt console_lock fix to resolve a reported noisy warning at runtime
Both of these have been in linux-next with no reported issues"
* tag 'tty-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: Grab console_lock around con_is_bound in show_bind
tty: serial: netx: Delete driver
Merge tag 'spdx-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX fixes from Greg KH:
"Here are some small SPDX fixes for 5.3-rc2 for things that came in
during the 5.3-rc1 merge window that we previously missed.
Only three small patches here:
- two uapi patches to resolve some SPDX tags that were not correct
- fix an invalid SPDX tag in the iomap Makefile file
All have been properly reviewed on the public mailing lists"
* tag 'spdx-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
iomap: fix Invalid License ID
treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers again
treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headers
Merge tag 'usb-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small fixes for 5.3-rc2. All of these resolve some
reported issues, some more than others :)
Included in here is:
- xhci fix for an annoying issue with odd devices
- reversion of some usb251xb patches that should not have been merged
- usb pci quirk additions and fixups
- usb storage fix
- usb host controller error test fix
All of these have been in linux-next with no reported issues"
* tag 'usb-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix crash if scatter gather is used with Immediate Data Transfer (IDT).
usb: usb251xb: Reallow swap-dx-lanes to apply to the upstream port
Revert "usb: usb251xb: Add US port lanes inversion property"
Revert "usb: usb251xb: Add US lanes inversion dts-bindings"
usb: wusbcore: fix unbalanced get/put cluster_id
usb/hcd: Fix a NULL vs IS_ERR() bug in usb_hcd_setup_local_mem()
usb-storage: Add a limitation for blk_queue_max_hw_sectors()
usb: pci-quirks: Minor cleanup for AMD PLL quirk
usb: pci-quirks: Correct AMD PLL quirk detection
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"Here's the first batch of fixes for this release cycle.
Main diffstat here is the re-deletion of netx. I messed up and most
likely didn't remove the files from the index when I test-merged this
and saw conflicts, and from there on out 'git rerere' remembered the
mistake and I missed checking it. Here it's done again as expected.
Besides that:
- A defconfig refresh + enabling of new drivers for u8500
- i.MX fixlets for i2c/SAI/pinmux
- sleep.S build fix for Davinci
- Broadcom devicetree build/warning fix"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: defconfig: u8500: Add new drivers
ARM: defconfig: u8500: Refresh defconfig
ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-mux
ARM: davinci: fix sleep.S build error on ARMv4
arm64: dts: imx8mq: fix SAI compatible
arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1
ARM: dts: imx6ul: fix clock frequency property name of I2C buses
ARM: Delete netx a second time
ARM: dts: imx7ulp: Fix usb-phy unit address format
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and functional updates:
- Prevent stale huge I/O TLB mappings on 32bit. A long standing bug
which got exposed by KPTI support for 32bit
- Prevent bogus access_ok() warnings in arch_stack_walk_user()
- Add display quirks for Lenovo devices which have height and width
swapped
- Add the missing CR2 fixup for 32 bit async pagefaults. Fallout of
the CR2 bug fix series.
- Unbreak handling of force enabled HPET by moving the 'is HPET
counting' check back to the original place.
- A more accurate check for running on a hypervisor platform in the
MDS mitigation code. Not perfect, but more accurate than the
previous one.
- Update a stale and confusing comment vs. IRQ stacks"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/mds: Apply more accurate check on hypervisor platform
x86/hpet: Undo the early counter is counting check
x86/entry/32: Pass cr2 to do_async_page_fault()
x86/irq/64: Update stale comment
x86/sysfb_efi: Add quirks for some devices with swapped width and height
x86/stacktrace: Prevent access_ok() warnings in arch_stack_walk_user()
mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()
x86/mm: Sync also unmappings in vmalloc_sync_all()
x86/mm: Check for pfn instead of page in vmalloc_sync_one()
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Two fixes for the fair scheduling class:
- Prevent freeing memory which is accessible by concurrent readers
- Make the RCU annotations for numa groups consistent"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Use RCU accessors consistently for ->numa_group
sched/fair: Don't free p->numa_faults with concurrent readers
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A pile of perf related fixes:
Kernel:
- Fix SLOTS PEBS event constraints for Icelake CPUs
- Add the missing mask bit to allow counting hardware generated
prefetches on L3 for Icelake CPUs
- Make the test for hypervisor platforms more accurate (as far as
possible)
- Handle PMUs correctly which override event->cpu
- Yet another missing fallthrough annotation
Tools:
perf.data:
- Fix loading of compressed data split across adjacent records
- Fix buffer size setting for processing CPU topology perf.data
header.
perf stat:
- Fix segfault for event group in repeat mode
- Always separate "stalled cycles per insn" line, it was being
appended to the "instructions" line.
perf script:
- Fix --max-blocks man page description.
- Improve man page description of metrics.
- Fix off by one in brstackinsn IPC computation.
perf probe:
- Avoid calling freeing routine multiple times for same pointer.
perf build:
- Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings
treated as errors, breaking the build"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Mark expected switch fall-throughs
perf/core: Fix creating kernel counters for PMUs that override event->cpu
perf/x86: Apply more accurate check on hypervisor platform
perf/x86/intel: Fix invalid Bit 13 for Icelake MSR_OFFCORE_RSP_x register
perf/x86/intel: Fix SLOTS PEBS event constraint
perf build: Do not use -Wshadow on gcc < 4.8
perf probe: Avoid calling freeing routine multiple times for same pointer
perf probe: Set pev->nargs to zero after freeing pev->args entries
perf session: Fix loading of compressed data split across adjacent records
perf stat: Always separate stalled cycles per insn
perf stat: Fix segfault for event group in repeat mode
perf tools: Fix proper buffer size for feature processing
perf script: Fix off by one in brstackinsn IPC computation
perf script: Improve man page description of metrics
perf script: Fix --max-blocks man page description
Merge tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull Wimplicit-fallthrough enablement from Gustavo A. R. Silva:
"This marks switch cases where we are expecting to fall through, and
globally enables the -Wimplicit-fallthrough option in the main
Makefile.
Finally, some missing-break fixes that have been tagged for -stable:
- drm/amdkfd: Fix missing break in switch statement
- drm/amdgpu/gfx10: Fix missing break in switch statement
With these changes, we completely get rid of all the fall-through
warnings in the kernel"
* tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
Makefile: Globally enable fall-through warning
drm/i915: Mark expected switch fall-throughs
drm/amd/display: Mark expected switch fall-throughs
drm/amdkfd/kfd_mqd_manager_v10: Avoid fall-through warning
drm/amdgpu/gfx10: Fix missing break in switch statement
drm/amdkfd: Fix missing break in switch statement
perf/x86/intel: Mark expected switch fall-throughs
mtd: onenand_base: Mark expected switch fall-through
afs: fsclient: Mark expected switch fall-throughs
afs: yfsclient: Mark expected switch fall-throughs
can: mark expected switch fall-throughs
firewire: mark expected switch fall-throughs
Merge tag 's390-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add ABI to kernel image file which allows e.g. the file utility to
figure out the kernel version.
- Wire up clone3 system call.
- Add support for kasan bitops instrumentation.
- uapi header cleanup: use __u{16,32,64} instead of uint{16,32,64}_t.
- Provide proper ARCH_ZONE_DMA_BITS so the s390 DMA zone is correctly
defined with 2 GB instead of the default value of 1 MB.
- Farhan Ali leaves the group of vfio-ccw maintainers.
- Various small vfio-ccw fixes.
- Add missing locking for airq_areas array in virtio code.
- Minor qdio improvements.
* tag 's390-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: vfio-ccw: Remove myself as the maintainer
s390/mm: use shared variables for sysctl range check
virtio/s390: fix race on airq_areas[]
s390/dma: provide proper ARCH_ZONE_DMA_BITS value
s390/kasan: add bitops instrumentation
s390/bitops: make test functions return bool
s390: wire up clone3 system call
kbuild: enable arch/s390/include/uapi/asm/zcrypt.h for uapi header test
s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi header
s390/hypfs: fix a typo in the name of a function
s390/qdio: restrict QAOB usage to IQD unicast queues
s390/qdio: add sanity checks to the fast-requeue path
s390: enable detection of kernel version from bzImage
Documentation: fix vfio-ccw doc
vfio-ccw: Update documentation for csch/hsch
vfio-ccw: Don't call cp_free if we are processing a channel program
vfio-ccw: Set pa_nr to 0 if memory allocation fails for pa_iova_pfn
vfio-ccw: Fix memory leak and don't call cp_free in cp_init
vfio-ccw: Fix misleading comment when setting orb.cmd.c64
Merge tag 'devicetree-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree fixes from Rob Herring:
"The nvmem changes would typically go thru Greg's tree, but they were
missed in the merge window. [ Acked by Greg ]
Summary:
- Fix mismatches in $id values and actual filenames. Now checked by
tools.
- Convert nvmem binding to DT schema
- Fix a typo in of_property_read_bool() kerneldoc
- Remove some redundant description in al-fic interrupt-controller"
* tag 'devicetree-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Fix more $id value mismatches filenames
dt-bindings: nvmem: SID: Fix the examples node names
dt-bindings: nvmem: Add YAML schemas for the generic NVMEM bindings
of: Fix typo in kerneldoc
dt-bindings: interrupt-controller: al-fic: remove redundant binding
dt-bindings: clk: allwinner,sun4i-a10-ccu: Correct path in $id
Merge tag 'libnvdimm-fixes-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A collection of locking and async operations fixes for v5.3-rc2. These
had been soaking in a branch targeting the merge window, but missed
due to a regression hunt. This fixed up version has otherwise been in
-next this past week with no reported issues.
In order to gain confidence in the locking changes the pull also
includes a debug / instrumentation patch to enable lockdep coverage
for libnvdimm subsystem operations that depend on the device_lock for
exclusion. As mentioned in the changelog it is a hack, but it works
and documents the locking expectations of the sub-system in a way that
others can use lockdep to verify. The driver core touches got an ack
from Greg.
Summary:
- Fix duplicate device_unregister() calls (multiple threads competing
to do unregister work when scheduling device removal from a sysfs
attribute of the self-same device).
- Fix badblocks registration order bug. Ensure region badblocks are
initialized in advance of namespace registration.
- Fix a deadlock between the bus lock and probe operations.
- Export device-core infrastructure to coordinate async operations
via the device ->dead state.
- Add device-core infrastructure to validate device_lock() usage with
lockdep"
* tag 'libnvdimm-fixes-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
driver-core, libnvdimm: Let device subsystems add local lockdep coverage
libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlock
libnvdimm/bus: Stop holding nvdimm_bus_list_mutex over __nd_ioctl()
libnvdimm/bus: Prepare the nd_ioctl() path to be re-entrant
libnvdimm/region: Register badblocks before namespaces
libnvdimm/bus: Prevent duplicate device_unregister() calls
drivers/base: Introduce kill_device()
This file is used by clangd to use language server protocol.
It can be generated at each compile using scripts/gen_compile_commands.py.
Therefore it is different depending on the environment and should be
ignored.
Maxime Ripard [Thu, 27 Jun 2019 15:10:37 +0000 (16:10 +0100)]
dt-bindings: nvmem: Add YAML schemas for the generic NVMEM bindings
The nvmem providers and consumers have a bunch of generic properties that
are needed in a device tree. Add a YAML schemas for those.
Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
[Srini: Changed licence to (GPL-2.0 OR BSD-2-Clause)] Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Nine fixes: The most important core one is the dma_max_mapping_size
fix that corrects the boot problem Gunter Roeck was having. A couple
of other driver only fixes are significant, like the cxgbi selector
support addition, the alua 2 second delay and the fdomain build fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPG
scsi: ibmvfc: fix WARN_ON during event pool release
scsi: fcoe: fix a typo
scsi: megaraid_sas: Make some functions static
scsi: megaraid_sas: fix panic on loading firmware crashdump
scsi: megaraid_sas: fix spelling mistake "megarid_sas" -> "megaraid_sas"
scsi: core: fix the dma_max_mapping_size call
scsi: fdomain: fix building pcmcia front-end
scsi: target: cxgbit: add support for IEEE_8021QAZ_APP_SEL_STREAM selector
Merge tag 'drm-fixes-2019-07-26' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Dave seems to collect an entire streak of things happening, so again
me typing pull summary.
Nothing nefarious here, most of the fixes are for new stuff or things
users won't see. The amd-display patches are a bit different, and very
much look like they should have at least some cc: stable tags. Might
be amd is a bit too comfortable with their internal tree and not
enough looking at upstream. Dave&me are looking into this, in case
something needs rectified with process here.
Also no intel fixes pull, but intel CI is general become rather good,
still I guess expect a notch more for -rc3.
Summary:
amdgpu:
- fixes for (new in 5.3) hw support (vega20, navi)
- disable RAS
- lots of display fixes all over (audio, DSC, dongle, clock mgr)
ttm:
- fix dma_free_attrs calls to appease dma debugging
msm:
- fixes for dma-api, locking debug and compiler splats
core:
- fix cmdline mode to not apply rotation if not specified (new in 5.3)
- compiler warn fix"
* tag 'drm-fixes-2019-07-26' of git://anongit.freedesktop.org/drm/drm: (46 commits)
drm/amd/display: Set enabled to false at start of audio disable
drm/amdgpu/smu: move fan rpm query into the asic specific code
drm/amd/powerplay: custom peak clock freq for navi10
drm: silence variable 'conn' set but not used
drm/msm: stop abusing dma_map/unmap for cache
drm/msm/dpu: Correct dpu encoder spinlock initialization
drm/msm: correct NULL pointer dereference in context_init
drm/amd/display: handle active dongle port type is DP++ or DP case
drm/amd/display: do not read link setting if edp not connected
drm/amd/display: Increase size of audios array
drm/amd/display: drop ASSERT() if eDP panel is not connected
drm/amd/display: Only enable audio if speaker allocation exists
drm/amd/display: Fix dc_create failure handling and 666 color depths
drm/amd/display: allocate 4 ddc engines for RV2
drm/amd/display: put back front end initialization sequence
drm/amd/display: Wait for flip to complete
drm/amd/display: Change min_h_sync_width from 8 to 4
drm/amd/display: use encoder's engine id to find matched free audio device
drm/amd/display: fix DMCU hang when going into Modern Standby
drm/amd/display: Disable Audio on reinitialize hardware
...
block: fix max segment size handling in blk_queue_virt_boundary
We should only set the max segment size to unlimited if we actually
have a virt boundary. Otherwise we accidentally clear that limit
when called from the SCSI midlayer, which always calls
blk_queue_virt_boundary, even if that mask is 0.
Fixes: 7ad388d8e4c7 ("scsi: core: add a host / host template field for the virt boundary") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull documentation fixes from Jonathan Corbet:
"This is mostly a set of follow-on fixes from Mauro fixing various
fallout from the massive RST conversion; a few other small fixes as
well"
* tag 'docs-5.3-1' of git://git.lwn.net/linux: (21 commits)
docs: phy: Drop duplicate 'be made'
doc:it_IT: translations in process/
docs/vm: transhuge: fix typo in madvise reference
doc:it_IT: rephrase statement
doc:it_IT: align translation to mainline
docs: load_config.py: ensure subdirs end with "/"
docs: virtual: add it to the documentation body
docs: remove extra conf.py files
docs: load_config.py: avoid needing a conf.py just due to LaTeX docs
scripts/sphinx-pre-install: seek for Noto CJK fonts for pdf output
scripts/sphinx-pre-install: cleanup Gentoo checks
scripts/sphinx-pre-install: fix latexmk dependencies
scripts/sphinx-pre-install: don't use LaTeX with CentOS 7
scripts/sphinx-pre-install: fix script for RHEL/CentOS
docs: conf.py: only use CJK if the font is available
docs: conf.py: add CJK package needed by translations
docs: pdf: add all Documentation/*/index.rst to PDF output
docs: fix broken doc references due to renames
docs: power: add it to to the main documentation index
docs: powerpc: convert docs to ReST and rename to *.rst
...
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"There's more here than we usually have at this stage, but that's
mainly down to the stacktrace changes which came in slightly too late
for the merge window.
Summary:
- Big bad batch of MAINTAINERS updates
- Fix handling of SP alignment fault exceptions
- Fix PSTATE.SSBS handling on heterogeneous systems
- Fix fallout from moving to the generic vDSO implementation
- Fix stack unwinding in the face of frame corruption
- Fix off-by-one in IORT code
- Minor SVE cleanups"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()
arm64: entry: SP Alignment Fault doesn't write to FAR_EL1
arm64: Force SSBS on context switch
MAINTAINERS: Update my email address
MAINTAINERS: Update my email address
MAINTAINERS: Fix spelling mistake in my name
MAINTAINERS: Update my email address to @kernel.org
arm64: mm: Drop pte_huge()
arm64/sve: Fix a couple of magic numbers for the Z-reg count
arm64/sve: Factor out FPSIMD to SVE state conversion
arm64: stacktrace: Better handle corrupted stacks
arm64: stacktrace: Factor out backtrace initialisation
arm64: stacktrace: Constify stacktrace.h functions
arm64: vdso: Cleanup Makefiles
arm64: vdso: fix flip/flop vdso build bug
arm64: vdso: Fix population of AT_SYSINFO_EHDR for compat vdso
Merge tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two regression fixes:
- hangs caused by a missing barrier in the locking code
- memory leaks of extent_state due to bad handling of a cached
pointer"
* tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix extent_state leak in btrfs_lock_and_flush_ordered_range
btrfs: Fix deadlock caused by missing memory barrier
Merge tag 'for-linus-20190726' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Several io_uring fixes/improvements:
- Blocking fix for O_DIRECT (me)
- Latter page slowness for registered buffers (me)
- Fix poll hang under certain conditions (me)
- Defer sequence check fix for wrapped rings (Zhengyuan)
- Mismatch in async inc/dec accounting (Zhengyuan)
- Memory ordering issue that could cause stall (Zhengyuan)
- Track sequential defer in bytes, not pages (Zhengyuan)
- NVMe pull request from Christoph
- Set of hang fixes for wbt (Josef)
- Redundant error message kill for libahci (Ding)
- Remove unused blk_mq_sched_started_request() and related ops (Marcos)
- drbd dynamic alloc shash descriptor to reduce stack use (Arnd)
- blkcg ->pd_stat() non-debug print (Tejun)
- bcache memory leak fix (Wei)
- Comment fix (Akinobu)
- BFQ perf regression fix (Paolo)
* tag 'for-linus-20190726' of git://git.kernel.dk/linux-block: (24 commits)
io_uring: ensure ->list is initialized for poll commands
Revert "nvme-pci: don't create a read hctx mapping without read queues"
nvme: fix multipath crash when ANA is deactivated
nvme: fix memory leak caused by incorrect subsystem free
nvme: ignore subnqn for ADATA SX6000LNP
drbd: dynamically allocate shash descriptor
block: blk-mq: Remove blk_mq_sched_started_request and started_request
bcache: fix possible memory leak in bch_cached_dev_run()
io_uring: track io length in async_list based on bytes
io_uring: don't use iov_iter_advance() for fixed buffers
block: properly handle IOCB_NOWAIT for async O_DIRECT IO
blk-mq: allow REQ_NOWAIT to return an error inline
io_uring: add a memory barrier before atomic_read
rq-qos: use a mb for got_token
rq-qos: set ourself TASK_UNINTERRUPTIBLE after we schedule
rq-qos: don't reset has_sleepers on spurious wakeups
rq-qos: fix missed wake-ups in rq_qos_throttle
wait: add wq_has_single_sleeper helper
block, bfq: check also in-flight I/O in dispatch plugging
block: fix sysfs module parameters directory path in comment
...
Merge tag 'sound-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"All relatively small changes:
- a regression fix for PCM link code with CONFIG_REFCOUNT_FULL;
stumbled on a slight difference between atomic_t and refcount_t
- a couple of HD-audio stabilization patches addressing the too slow
PM resume seen on some Intel chips
- a series of ALSA compress-offload API fixes, including the
regression by the previous capture stream support
- trivial LINE6 USB-audio driver fixes, a new Conexant HD-audio chip
coverage, and a fix in AC97 bus error path"
* tag 'sound-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add a conexant codec entry to let mute led work
ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips
ALSA: ac97: Fix double free of ac97_codec_device
ALSA: compress: Be more restrictive about when a drain is allowed
ALSA: compress: Don't allow paritial drain operations on capture streams
ALSA: compress: Prevent bypasses of set_params
ALSA: compress: Fix regression on compressed capture streams
ALSA: line6: Fix a typo
ALSA: pcm: Fix refcount_inc() on zero usage
ALSA: line6: Fix wrong altsetting for LINE6_PODHD500_1
ALSA: hda - Optimize resume for codecs without jack detection
Merge tag 'iommu-fixes-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- revert an Intel VT-d patch that caused boot problems on some machines
- fix AMD IOMMU interrupts with x2apic enabled
- fix a potential crash when Intel VT-d domain allocation fails
- fix crash in Intel VT-d driver when accessing a domain without a
flush queue
- formatting fix for new Intel VT-d debugfs code
- fix for use-after-free bug in IOVA code
- fix for a NULL-pointer dereference in Intel VT-d driver when PCI
hotplug is used
- compilation fix for one of the previous fixes
* tag 'iommu-fixes-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Add support for X2APIC IOMMU interrupts
iommu/iova: Fix compilation error with !CONFIG_IOMMU_IOVA
iommu/vt-d: Print pasid table entries MSB to LSB in debugfs
iommu/iova: Remove stale cached32_node
iommu/vt-d: Check if domain->pgd was allocated
iommu/vt-d: Don't queue_iova() if there is no flush queue
iommu/vt-d: Avoid duplicated pci dma alias consideration
Revert "iommu/vt-d: Consolidate domain_init() to avoid duplication"
Merge tag 'hwmon-for-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"A couple of hwmon bug fixes:
- Update k8temp documentation URL
- Register address fixes in nct6775 driver
- Fix potential division by zero in occ driver"
* tag 'hwmon-for-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (k8temp) documentation: update URL of datasheet
hwmon: (nct6775) Fix register address and added missed tolerance for nct6106
hwmon: (occ) Fix division by zero issue
Al Viro [Wed, 24 Jul 2019 16:45:46 +0000 (12:45 -0400)]
fix the struct mount leak in umount_tree()
We need to drop everything we remove from the tree, whether
mnt_has_parent() is true or not. Usually the bug manifests as a slow
memory leak (leaked struct mount for initramfs); it becomes much more
visible in mount_subtree() users, such as btrfs. There we leak
a struct mount for btrfs superblock being mounted, which prevents
fs shutdown on subsequent umount.
Fixes: 56cbb429d911 ("switch the remnants of releasing the mountpoint away from fs_pin") Reported-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Vasily Gorbik [Tue, 25 Jun 2019 22:00:42 +0000 (00:00 +0200)]
s390/mm: use shared variables for sysctl range check
Since commit eec4844fae7c ("proc/sysctl: add shared variables for range
check") special shared variables are available for sysctl range check.
Reuse them for /proc/sys/vm/allocate_pgste proc handler.
Halil Pasic [Tue, 23 Jul 2019 15:11:01 +0000 (17:11 +0200)]
virtio/s390: fix race on airq_areas[]
The access to airq_areas was racy ever since the adapter interrupts got
introduced to virtio-ccw, but since commit 39c7dcb15892 ("virtio/s390:
make airq summary indicators DMA") this became an issue in practice as
well. Namely before that commit the airq_info that got overwritten was
still functional. After that commit however the two infos share a
summary_indicator, which aggravates the situation. Which means
auto-online mechanism occasionally hangs the boot with virtio_blk.
Halil Pasic [Tue, 23 Jul 2019 22:51:55 +0000 (00:51 +0200)]
s390/dma: provide proper ARCH_ZONE_DMA_BITS value
On s390 ZONE_DMA is up to 2G, i.e. ARCH_ZONE_DMA_BITS should be 31 bits.
The current value is 24 and makes __dma_direct_alloc_pages() take a
wrong turn first (but __dma_direct_alloc_pages() recovers then).
Let's correct ARCH_ZONE_DMA_BITS value and avoid wrong turns.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reported-by: Petr Tesarik <ptesarik@suse.cz> Fixes: c61e9637340e ("dma-direct: add support for allocation from ZONE_DMA and ZONE_DMA32") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
btrfs: fix extent_state leak in btrfs_lock_and_flush_ordered_range
btrfs_lock_and_flush_ordered_range() loads given "*cached_state" into
cachedp, which, in general, is NULL. Then, lock_extent_bits() updates
"cachedp", but it never goes backs to the caller. Thus the caller still
see its "cached_state" to be NULL and never free the state allocated
under btrfs_lock_and_flush_ordered_range(). As a result, we will
see massive state leak with e.g. fstests btrfs/005. Fix this bug by
properly handling the pointers.
Fixes: bd80d94efb83 ("btrfs: Always use a cached extent_state in btrfs_lock_and_flush_ordered_range") Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
Dave Airlie [Fri, 26 Jul 2019 04:09:49 +0000 (14:09 +1000)]
Merge tag 'drm-misc-fixes-2019-07-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- pick up the cmdline fix which missed the merge window (Dmitry)
- a handful of msm fixes so i don't have to spin up msm-fixes (Various)
- fix -Wunused-but-set-variable warning in drm_framebuffer (Qian)
Now that all the fall-through warnings have been addressed in the
kernel, enable the fall-through warning globally.
Also, update the deprecated.rst file to include implicit fall-through
as 'deprecated' so people can be pointed to a single location for
justification.
Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Kees Cook <keescook@chromium.org> Cc: linux-kbuild@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/gpu/drm/i915/gem/i915_gem_mman.c: In function ‘i915_gem_fault’:
drivers/gpu/drm/i915/gem/i915_gem_mman.c:342:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (!i915_terminally_wedged(i915))
^
drivers/gpu/drm/i915/gem/i915_gem_mman.c:345:2: note: here
case -EAGAIN:
^~~~
drivers/gpu/drm/i915/gem/i915_gem_pages.c: In function ‘i915_gem_object_map’:
./include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
# define unlikely(x) __builtin_expect(!!(x), 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:136:2: note: in expansion of macro ‘unlikely’
unlikely(__ret_warn_on); \
^~~~~~~~
drivers/gpu/drm/i915/i915_utils.h:49:25: note: in expansion of macro ‘WARN’
#define MISSING_CASE(x) WARN(1, "Missing case (%s == %ld)\n", \
^~~~
drivers/gpu/drm/i915/gem/i915_gem_pages.c:270:3: note: in expansion of macro ‘MISSING_CASE’
MISSING_CASE(type);
^~~~~~~~~~~~
drivers/gpu/drm/i915/gem/i915_gem_pages.c:272:2: note: here
case I915_MAP_WB:
^~~~
drivers/gpu/drm/i915/i915_gpu_error.c: In function ‘error_record_engine_registers’:
./include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
# define unlikely(x) __builtin_expect(!!(x), 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:136:2: note: in expansion of macro ‘unlikely’
unlikely(__ret_warn_on); \
^~~~~~~~
drivers/gpu/drm/i915/i915_utils.h:49:25: note: in expansion of macro ‘WARN’
#define MISSING_CASE(x) WARN(1, "Missing case (%s == %ld)\n", \
^~~~
drivers/gpu/drm/i915/i915_gpu_error.c:1196:5: note: in expansion of macro ‘MISSING_CASE’
MISSING_CASE(engine->id);
^~~~~~~~~~~~
drivers/gpu/drm/i915/i915_gpu_error.c:1197:4: note: here
case RCS0:
^~~~
drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_get_fia_supported_lane_count’:
./include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
# define unlikely(x) __builtin_expect(!!(x), 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:136:2: note: in expansion of macro ‘unlikely’
unlikely(__ret_warn_on); \
^~~~~~~~
drivers/gpu/drm/i915/i915_utils.h:49:25: note: in expansion of macro ‘WARN’
#define MISSING_CASE(x) WARN(1, "Missing case (%s == %ld)\n", \
^~~~
drivers/gpu/drm/i915/display/intel_dp.c:233:3: note: in expansion of macro ‘MISSING_CASE’
MISSING_CASE(lane_info);
^~~~~~~~~~~~
drivers/gpu/drm/i915/display/intel_dp.c:234:2: note: here
case 1:
^~~~
drivers/gpu/drm/i915/display/intel_display.c: In function ‘check_digital_port_conflicts’:
CC [M] drivers/gpu/drm/nouveau/nvkm/engine/disp/cursgv100.o
drivers/gpu/drm/i915/display/intel_display.c:12043:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (WARN_ON(!HAS_DDI(to_i915(dev))))
^
drivers/gpu/drm/i915/display/intel_display.c:12046:3: note: here
case INTEL_OUTPUT_DP:
^~~~
Also, notice that the Makefile is modified to stop ignoring
fall-through warnings. The -Wimplicit-fallthrough option
will be enabled globally in v5.3.
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
In preparation to enabling -Wimplicit-fallthrough, this patch silences
the following warning:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_mqd_manager_v10.c: In function ‘mqd_manager_init_v10’:
./include/linux/dynamic_debug.h:122:52: warning: this statement may fall through [-Wimplicit-fallthrough=]
#define __dynamic_func_call(id, fmt, func, ...) do { \
^
./include/linux/dynamic_debug.h:143:2: note: in expansion of macro ‘__dynamic_func_call’
__dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~
./include/linux/dynamic_debug.h:153:2: note: in expansion of macro ‘_dynamic_func_call’
_dynamic_func_call(fmt, __dynamic_pr_debug, \
^~~~~~~~~~~~~~~~~~
./include/linux/printk.h:336:2: note: in expansion of macro ‘dynamic_pr_debug’
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_mqd_manager_v10.c:432:3: note: in expansion of macro ‘pr_debug’
pr_debug("%s@%i\n", __func__, __LINE__);
^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_mqd_manager_v10.c:433:2: note: here
case KFD_MQD_TYPE_COMPUTE:
^~~~
by removing the call to pr_debug() in KFD_MQD_TYPE_CP:
"The mqd init for CP and COMPUTE will have the same routine." [1]
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Add missing break statement in order to prevent the code from falling
through to case CHIP_NAVI10.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: 14328aa58ce5 ("drm/amdkfd: Add navi10 support to amdkfd. (v3)") Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
perf/x86/intel: Mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/x86/events/intel/core.c: In function ‘intel_pmu_init’:
arch/x86/events/intel/core.c:4959:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
pmem = true;
~~~~~^~~~~~
arch/x86/events/intel/core.c:4960:2: note: here
case INTEL_FAM6_SKYLAKE_MOBILE:
^~~~
arch/x86/events/intel/core.c:5008:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
pmem = true;
~~~~~^~~~~~
arch/x86/events/intel/core.c:5009:2: note: here
case INTEL_FAM6_ICELAKE_MOBILE:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
mtd: onenand_base: Mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
drivers/mtd/nand/onenand/onenand_base.c: In function ‘onenand_check_features’:
drivers/mtd/nand/onenand/onenand_base.c:3264:17: warning: this statement may fall through [-Wimplicit-fallthrough=]
this->options |= ONENAND_HAS_NOP_1;
drivers/mtd/nand/onenand/onenand_base.c:3265:2: note: here
case ONENAND_DEVICE_DENSITY_4Gb:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Cc: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
Warning level 3 was used: -Wimplicit-fallthrough=3
fs/afs/fsclient.c: In function ‘afs_deliver_fs_fetch_acl’:
fs/afs/fsclient.c:2199:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
call->unmarshall++;
~~~~~~~~~~~~~~~~^~
fs/afs/fsclient.c:2202:2: note: here
case 1:
^~~~
fs/afs/fsclient.c:2216:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
call->unmarshall++;
~~~~~~~~~~~~~~~~^~
fs/afs/fsclient.c:2219:2: note: here
case 2:
^~~~
fs/afs/fsclient.c:2225:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
call->unmarshall++;
~~~~~~~~~~~~~~~~^~
fs/afs/fsclient.c:2228:2: note: here
case 3:
^~~~
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
afs: yfsclient: Mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
fs/afs/yfsclient.c: In function ‘yfs_deliver_fs_fetch_opaque_acl’:
fs/afs/yfsclient.c:1984:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
call->unmarshall++;
~~~~~~~~~~~~~~~~^~
fs/afs/yfsclient.c:1987:2: note: here
case 1:
^~~~
fs/afs/yfsclient.c:2005:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
call->unmarshall++;
~~~~~~~~~~~~~~~~^~
fs/afs/yfsclient.c:2008:2: note: here
case 2:
^~~~
fs/afs/yfsclient.c:2014:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
call->unmarshall++;
~~~~~~~~~~~~~~~~^~
fs/afs/yfsclient.c:2017:2: note: here
case 3:
^~~~
fs/afs/yfsclient.c:2035:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
call->unmarshall++;
~~~~~~~~~~~~~~~~^~
fs/afs/yfsclient.c:2038:2: note: here
case 4:
^~~~
fs/afs/yfsclient.c:2047:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
call->unmarshall++;
~~~~~~~~~~~~~~~~^~
fs/afs/yfsclient.c:2050:2: note: here
case 5:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Also, fix some commenting style issues.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warnings:
drivers/net/can/peak_canfd/peak_pciefd_main.c:668:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/spi/mcp251x.c:875:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/usb/peak_usb/pcan_usb.c:422:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/at91_can.c:895:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/at91_can.c:953:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/usb/peak_usb/pcan_usb.c: In function ‘pcan_usb_decode_error’:
drivers/net/can/usb/peak_usb/pcan_usb.c:422:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (n & PCAN_USB_ERROR_BUS_LIGHT) {
^
drivers/net/can/usb/peak_usb/pcan_usb.c:428:2: note: here
case CAN_STATE_ERROR_WARNING:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Notice that in some cases spelling mistakes were fixed.
In other cases, the /* fall through */ comment is placed
at the bottom of the case statement, which is what GCC
is expecting to find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/firewire/core-device.c: In function ‘set_broadcast_channel’:
drivers/firewire/core-device.c:969:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (data & cpu_to_be32(1 << 31)) {
^
drivers/firewire/core-device.c:974:3: note: here
case RCODE_ADDRESS_ERROR:
^~~~
drivers/firewire/core-iso.c: In function ‘manage_channel’:
drivers/firewire/core-iso.c:308:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((data[0] & bit) == (data[1] & bit))
^
drivers/firewire/core-iso.c:312:3: note: here
default:
^~~~~~~
drivers/firewire/core-topology.c: In function ‘count_ports’:
drivers/firewire/core-topology.c:69:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
(*child_port_count)++;
~~~~~~~~~~~~~~~~~~~^~
drivers/firewire/core-topology.c:70:3: note: here
case SELFID_PORT_PARENT:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that in some cases, the code comment is modified in
accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Cc: Kees Cook <keescook@chromium.org> Cc: Mathieu Malaterre <malat@debian.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (reworded a comment) Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
structleak: disable STRUCTLEAK_BYREF in combination with KASAN_STACK
The combination of KASAN_STACK and GCC_PLUGIN_STRUCTLEAK_BYREF
leads to much larger kernel stack usage, as seen from the warnings
about functions that now exceed the 2048 byte limit:
drivers/media/i2c/tvp5150.c:253:1: error: the frame size of 3936 bytes is larger than 2048 bytes
drivers/media/tuners/r820t.c:1327:1: error: the frame size of 2816 bytes is larger than 2048 bytes
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:16552:1: error: the frame size of 3144 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
fs/ocfs2/aops.c:1892:1: error: the frame size of 2088 bytes is larger than 2048 bytes
fs/ocfs2/dlm/dlmrecovery.c:737:1: error: the frame size of 2088 bytes is larger than 2048 bytes
fs/ocfs2/namei.c:1677:1: error: the frame size of 2584 bytes is larger than 2048 bytes
fs/ocfs2/super.c:1186:1: error: the frame size of 2640 bytes is larger than 2048 bytes
fs/ocfs2/xattr.c:3678:1: error: the frame size of 2176 bytes is larger than 2048 bytes
net/bluetooth/l2cap_core.c:7056:1: error: the frame size of 2144 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
net/bluetooth/l2cap_core.c: In function 'l2cap_recv_frame':
net/bridge/br_netlink.c:1505:1: error: the frame size of 2448 bytes is larger than 2048 bytes
net/ieee802154/nl802154.c:548:1: error: the frame size of 2232 bytes is larger than 2048 bytes
net/wireless/nl80211.c:1726:1: error: the frame size of 2224 bytes is larger than 2048 bytes
net/wireless/nl80211.c:2357:1: error: the frame size of 4584 bytes is larger than 2048 bytes
net/wireless/nl80211.c:5108:1: error: the frame size of 2760 bytes is larger than 2048 bytes
net/wireless/nl80211.c:6472:1: error: the frame size of 2112 bytes is larger than 2048 bytes
The structleak plugin was previously disabled for CONFIG_COMPILE_TEST,
but meant we missed some bugs, so this time we should address them.
The frame size warnings are distracting, and risking a kernel stack
overflow is generally not beneficial to performance, so it may be best
to disallow that particular combination. This can be done by turning
off either one. I picked the dependency in GCC_PLUGIN_STRUCTLEAK_BYREF
and GCC_PLUGIN_STRUCTLEAK_BYREF_ALL, as this option is designed to
make uninitialized stack usage less harmful when enabled on its own,
but it also prevents KASAN from detecting those cases in which it was
in fact needed.
KASAN_STACK is currently implied by KASAN on gcc, but could be made a
user selectable option if we want to allow combining (non-stack) KASAN
with GCC_PLUGIN_STRUCTLEAK_BYREF.
Note that it would be possible to specifically address the files that
print the warning, but presumably the overall stack usage is still
significantly higher than in other configurations, so this would not
address the full problem.
I could not test this with CONFIG_INIT_STACK_ALL, which may or may not
suffer from a similar problem.
Merge branch 'nvme-5.3' of git://git.infradead.org/nvme into for-linus
Pull NVMe fixes from Christoph.
* 'nvme-5.3' of git://git.infradead.org/nvme:
Revert "nvme-pci: don't create a read hctx mapping without read queues"
nvme: fix multipath crash when ANA is deactivated
nvme: fix memory leak caused by incorrect subsystem free
nvme: ignore subnqn for ADATA SX6000LNP
io_uring: ensure ->list is initialized for poll commands
Daniel reports that when testing an http server that uses io_uring
to poll for incoming connections, sometimes it hard crashes. This is
due to an uninitialized list member for the io_uring request. Normally
this doesn't trigger and none of the test cases caught it.
Reported-by: Daniel Kozak <kozzi11@gmail.com> Tested-by: Daniel Kozak <kozzi11@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge tag 'pm-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki
"These fix two issues related to the RAPL MMIO interface support added
recently and one cpufreq driver issue.
Specifics:
- Initialize the power capping subsystem and the RAPL driver earlier
in case the int340X thermal driver is built-in and attempts to
register an MMIO interface for RAPL which must not happen before
the requisite infrastructure is ready (Zhang Rui)
- Fix possible use-after-free in the pasemi cpufreq driver (Wen
Yang)"
* tag 'pm-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()
int340X/processor_thermal_device: Fix proc_thermal_rapl_remove()
powercap: Invoke powercap_init() and rapl_init() earlier
Merge tag 'riscv/for-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Four minor RISC-V-related changes:
- Add support for the new clone3 syscall for RV64, relying on the
generic support
- Add DT data for the gigabit Ethernet controller on the SiFive FU540
and the HiFive Unleashed board
- Update MAINTAINERS to add me to the arch/riscv maintainers' list
- Add support for PCIe message-signaled interrupts by reusing the
generic header file"
* tag 'riscv/for-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: Add DT node for SiFive FU540 Ethernet controller driver
riscv: include generic support for MSI irqdomains
MAINTAINERS: Add Paul as a RISC-V maintainer
riscv: enable sys_clone3 syscall for rv64
The access() (and faccessat()) credentials change can cause an
unnecessary load on the RCU machinery because every access() call ends
up freeing the temporary access credential using RCU.
This isn't really noticeable on small machines, but if you have hundreds
of cores you can cause huge slowdowns due to RCU storms.
It's easy to avoid: the temporary access crededntials aren't actually
normally accessed using RCU at all, so we can avoid the whole issue by
just marking them as such.
* access-creds:
access: avoid the RCU grace period for the temporary subjective credentials
Nikolay Borisov [Thu, 25 Jul 2019 08:27:29 +0000 (11:27 +0300)]
btrfs: Fix deadlock caused by missing memory barrier
Commit 06297d8cefca ("btrfs: switch extent_buffer blocking_writers from
atomic to int") changed the type of blocking_writers but forgot to
adjust relevant code in btrfs_tree_unlock by converting the
smp_mb__after_atomic to smp_mb. This opened up the possibility of a
deadlock due to re-ordering of setting blocking_writers and
checking/waking up the waiter. This particular lockup is explained in a
comment above waitqueue_active() function.
Fix it by converting the memory barrier to a full smp_mb, accounting
for the fact that blocking_writers is a simple integer.
Fixes: 06297d8cefca ("btrfs: switch extent_buffer blocking_writers from atomic to int") Tested-by: Johannes Thumshirn <jthumshirn@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
perf/x86/intel: Mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/x86/events/intel/core.c: In function ‘intel_pmu_init’:
arch/x86/events/intel/core.c:4959:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/events/intel/core.c:5008:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190624161913.GA32270@embeddedor Signed-off-by: Ingo Molnar <mingo@kernel.org>
Leonard Crestez [Wed, 24 Jul 2019 12:53:24 +0000 (15:53 +0300)]
perf/core: Fix creating kernel counters for PMUs that override event->cpu
Some hardware PMU drivers will override perf_event.cpu inside their
event_init callback. This causes a lockdep splat when initialized through
the kernel API:
WARNING: CPU: 0 PID: 250 at kernel/events/core.c:2917 ctx_sched_out+0x78/0x208
pc : ctx_sched_out+0x78/0x208
Call trace:
ctx_sched_out+0x78/0x208
__perf_install_in_context+0x160/0x248
remote_function+0x58/0x68
generic_exec_single+0x100/0x180
smp_call_function_single+0x174/0x1b8
perf_install_in_context+0x178/0x188
perf_event_create_kernel_counter+0x118/0x160
Fix this by calling perf_install_in_context with event->cpu, just like
perf_event_open
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Frank Li <Frank.li@nxp.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/c4ebe0503623066896d7046def4d6b1e06e0eb2e.1563972056.git.leonard.crestez@nxp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yunying Sun [Wed, 24 Jul 2019 08:29:32 +0000 (16:29 +0800)]
perf/x86/intel: Fix invalid Bit 13 for Icelake MSR_OFFCORE_RSP_x register
The Intel SDM states that bit 13 of Icelake's MSR_OFFCORE_RSP_x
register is valid, and used for counting hardware generated prefetches
of L3 cache. Update the bitmask to allow bit 13.
Before:
$ perf stat -e cpu/event=0xb7,umask=0x1,config1=0x1bfff/u sleep 3
Performance counter stats for 'sleep 3':
<not supported> cpu/event=0xb7,umask=0x1,config1=0x1bfff/u
After:
$ perf stat -e cpu/event=0xb7,umask=0x1,config1=0x1bfff/u sleep 3
Performance counter stats for 'sleep 3':
9,293 cpu/event=0xb7,umask=0x1,config1=0x1bfff/u
Signed-off-by: Yunying Sun <yunying.sun@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@kernel.org Cc: alexander.shishkin@linux.intel.com Cc: bp@alien8.de Cc: hpa@zytor.com Cc: jolsa@redhat.com Cc: namhyung@kernel.org Link: https://lkml.kernel.org/r/20190724082932.12833-1-yunying.sun@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
An uninitialized/ zeroed mutex will go unnoticed because there is no
check for it. There is a magic check in the unlock's slowpath path which
might go unnoticed if the unlock happens in the fastpath.
Add a ->magic check early in the mutex_lock() and mutex_trylock() path.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190703092125.lsdf4gpsh2plhavb@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnd Bergmann [Fri, 28 Jun 2019 10:29:03 +0000 (12:29 +0200)]
locking/lockdep: Clean up #ifdef checks
As Will Deacon points out, CONFIG_PROVE_LOCKING implies TRACE_IRQFLAGS,
so the conditions I added in the previous patch, and some others in the
same file can be simplified by only checking for the former.
No functional change.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: Yuyang Du <duyuyang@gmail.com> Fixes: 886532aee3cd ("locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING") Link: https://lkml.kernel.org/r/20190628102919.2345242-1-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jan Stancek [Thu, 18 Jul 2019 08:51:25 +0000 (10:51 +0200)]
locking/rwsem: Add missing ACQUIRE to read_slowpath exit when queue is empty
LTP mtest06 has been observed to occasionally hit "still mapped when
deleted" and following BUG_ON on arm64.
The extra mapcount originated from pagefault handler, which handled
pagefault for vma that has already been detached. vma is detached
under mmap_sem write lock by detach_vmas_to_be_unmapped(), which
also invalidates vmacache.
When the pagefault handler (under mmap_sem read lock) calls
find_vma(), vmacache_valid() wrongly reports vmacache as valid.
After rwsem down_read() returns via 'queue empty' path (as of v5.2),
it does so without an ACQUIRE on sem->count:
down_read()
__down_read()
rwsem_down_read_failed()
__rwsem_down_read_failed_common()
raw_spin_lock_irq(&sem->wait_lock);
if (list_empty(&sem->wait_list)) {
if (atomic_long_read(&sem->count) >= 0) {
raw_spin_unlock_irq(&sem->wait_lock);
return sem;
The problem can be reproduced by running LTP mtest06 in a loop and
building the kernel (-j $NCPUS) in parallel. It does reproduces since
v4.20 on arm64 HPE Apollo 70 (224 CPUs, 256GB RAM, 2 nodes). It
triggers reliably in about an hour.
The patched kernel ran fine for 10+ hours.
Signed-off-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Will Deacon <will@kernel.org> Acked-by: Waiman Long <longman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dbueso@suse.de Fixes: 4b486b535c33 ("locking/rwsem: Exit read lock slowpath if queue empty & no writer") Link: https://lkml.kernel.org/r/50b8914e20d1d62bb2dee42d342836c2c16ebee7.1563438048.git.jstancek@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Waiman Long [Sat, 20 Jul 2019 15:04:10 +0000 (11:04 -0400)]
locking/rwsem: Don't call owner_on_cpu() on read-owner
For writer, the owner value is cleared on unlock. For reader, it is
left intact on unlock for providing better debugging aid on crash dump
and the unlock of one reader may not mean the lock is free.
As a result, the owner_on_cpu() shouldn't be used on read-owner
as the task pointer value may not be valid and it might have
been freed. That is the case in rwsem_spin_on_owner(), but not in
rwsem_can_spin_on_owner(). This can lead to use-after-free error from
KASAN. For example,
BUG: KASAN: use-after-free in rwsem_down_write_slowpath
(/home/miguel/kernel/linux/kernel/locking/rwsem.c:669
/home/miguel/kernel/linux/kernel/locking/rwsem.c:1125)
Fix this by checking for RWSEM_READER_OWNED flag before calling
owner_on_cpu().
Reported-by: Luis Henriques <lhenriques@suse.com> Tested-by: Luis Henriques <lhenriques@suse.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: huang ying <huang.ying.caritas@gmail.com> Fixes: 94a9717b3c40e ("locking/rwsem: Make rwsem->owner an atomic_long_t") Link: https://lkml.kernel.org/r/81e82d5b-5074-77e8-7204-28479bbe0df0@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
sched/fair: Don't free p->numa_faults with concurrent readers
When going through execve(), zero out the NUMA fault statistics instead of
freeing them.
During execve, the task is reachable through procfs and the scheduler. A
concurrent /proc/*/sched reader can read data from a freed ->numa_faults
allocation (confirmed by KASAN) and write it back to userspace.
I believe that it would also be possible for a use-after-free read to occur
through a race between a NUMA fault and execve(): task_numa_fault() can
lead to task_numa_compare(), which invokes task_weight() on the currently
running task of a different CPU.
Another way to fix this would be to make ->numa_faults RCU-managed or add
extra locking, but it seems easier to wipe the NUMA fault statistics on
execve.
Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Fixes: 82727018b0d3 ("sched/numa: Call task_numa_free() from do_execve()") Link: https://lkml.kernel.org/r/20190716152047.14424-1-jannh@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Wenwen Wang [Sun, 14 Jul 2019 06:11:35 +0000 (01:11 -0500)]
test_firmware: fix a memory leak bug
In test_firmware_init(), the buffer pointed to by the global pointer
'test_fw_config' is allocated through kzalloc(). Then, the buffer is
initialized in __test_firmware_config_init(). In the case that the
initialization fails, the following execution in test_firmware_init() needs
to be terminated with an error code returned to indicate this failure.
However, the allocated buffer is not freed on this execution path, leading
to a memory leak bug.
To fix the above issue, free the allocated buffer before returning from
test_firmware_init().
eeprom: make older eeprom drivers select NVMEM_SYSFS
misc/eeprom/{at24,at25,eeprom_93xx46} drivers all register their
corresponding devices in the nvmem framework in compat mode which requires
nvmem sysfs interface to be present. The latter, however, has been split
out from nvmem under a separate Kconfig in commit ae0c2d725512 ("nvmem:
core: add NVMEM_SYSFS Kconfig"). As a result, probing certain I2C-attached
EEPROMs now fails with
at24: probe of 0-0050 failed with error -38
because of a stub implementation of nvmem_sysfs_setup_compat()
in drivers/nvmem/nvmem.h. Update the nvmem dependency for these drivers
so they could load again:
Daniel Vetter [Thu, 18 Jul 2019 08:09:03 +0000 (10:09 +0200)]
vt: Grab console_lock around con_is_bound in show_bind
Not really harmful not to, but also not harm in grabbing the lock. And
this shuts up a new WARNING I introduced in commit ddde3c18b700 ("vt:
More locking checks").
Reported-by: Jens Remus <jremus@linux.ibm.com> Cc: linux-kernel@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Martin Hostettler <textshell@uchuujin.de> Cc: Adam Borowski <kilobyte@angband.pl> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Fixes: ddde3c18b700 ("vt: More locking checks") Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: Jens Remus <jremus@linux.ibm.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20190718080903.22622-1-daniel.vetter@ffwll.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/speculation/mds: Apply more accurate check on hypervisor platform
X86_HYPER_NATIVE isn't accurate for checking if running on native platform,
e.g. CONFIG_HYPERVISOR_GUEST isn't set or "nopv" is enabled.
Checking the CPU feature bit X86_FEATURE_HYPERVISOR to determine if it's
running on native platform is more accurate.
This still doesn't cover the platforms on which X86_FEATURE_HYPERVISOR is
unsupported, e.g. VMware, but there is nothing which can be done about this
scenario.
Thomas Gleixner [Thu, 25 Jul 2019 06:28:45 +0000 (08:28 +0200)]
x86/hpet: Undo the early counter is counting check
Rui reported that on a Pentium D machine which has HPET forced enabled
because it is not advertised by ACPI, the early counter is counting check
leads to a silent boot hang.
The reason is that the ordering of checking the counter first and then
reconfiguring the HPET fails to work on that machine. As the HPET is not
advertised and presumably not initialized by the BIOS the early enable and
the following reconfiguration seems to bring it into a broken state. Adding
clocksource=jiffies to the command line results in the following
clocksource watchdog warning:
clocksource: timekeeping watchdog on CPU1:
Marking clocksource 'tsc-early' as unstable because the skew is too large:
clocksource: 'hpet' wd_now: 33 wd_last: 33 mask: ffffffff
That clearly shows that the HPET is not counting after it got reconfigured
and reenabled. If the counter is not working then the HPET timer is not
expiring either, which explains the boot hang.
Move the counter is counting check after the full configuration again to
unbreak these systems.
projects / mirror_ubuntu-eoan-kernel.git / log