Andy Lutomirski [Fri, 9 Jun 2017 18:49:15 +0000 (11:49 -0700)]
sched/core: Idle_task_exit() shouldn't use switch_mm_irqs_off()
idle_task_exit() can be called with IRQs on x86 on and therefore
should use switch_mm(), not switch_mm_irqs_off().
This doesn't seem to cause any problems right now, but it will
confuse my upcoming TLB flush changes. Nonetheless, I think it
should be backported because it's trivial. There won't be any
meaningful performance impact because idle_task_exit() is only
used when offlining a CPU.
Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: f98db6013c55 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler") Link: http://lkml.kernel.org/r/ca3d1a9fa93a0b49f5a8ff729eda3640fb6abdf9.1497034141.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
'schedstats' kernel parameter should be set to enable/disable, so
correct the printk hint saying that it should be set to 'enable'
rather than 'enabled' to enable scheduler tracepoints.
Linus Torvalds [Sat, 10 Jun 2017 18:09:23 +0000 (11:09 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull UFS fixes from Al Viro:
"This is just the obvious backport fodder; I'm pretty sure that there
will be more - definitely so wrt performance and quite possibly
correctness as well"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ufs: we need to sync inode before freeing it
excessive checks in ufs_write_failed() and ufs_evict_inode()
ufs_getfrag_block(): we only grab ->truncate_mutex on block creation path
ufs_extend_tail(): fix the braino in calling conventions of ufs_new_fragments()
ufs: set correct ->s_maxsize
ufs: restore maintaining ->i_blocks
fix ufs_isblockset()
ufs: restore proper tail allocation
Linus Torvalds [Sat, 10 Jun 2017 18:06:05 +0000 (11:06 -0700)]
Merge branch 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Some fixes that Dave Sterba collected.
We've been hitting an early enospc problem on production machines that
Omar tracked down to an old int->u64 mistake. I waited a bit on this
pull to make sure it was really the problem from production, but it's
on ~2100 hosts now and I think we're good.
Omar also noticed a commit in the queue would make new early ENOSPC
problems. I pulled that out for now, which is why the top three
commits are younger than the rest.
Otherwise these are all fixes, some explaining very old bugs that
we've been poking at for a while"
* 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix delalloc accounting leak caused by u32 overflow
Btrfs: clear EXTENT_DEFRAG bits in finish_ordered_io
btrfs: tree-log.c: Wrong printk information about namelen
btrfs: fix race with relocation recovery and fs_root setup
btrfs: fix memory leak in update_space_info failure path
btrfs: use correct types for page indices in btrfs_page_exists_in_range
btrfs: fix incorrect error return ret being passed to mapping_set_error
btrfs: Make flush bios explicitely sync
btrfs: fiemap: Cache and merge fiemap extent before submit it to user
Linus Torvalds [Sat, 10 Jun 2017 17:51:25 +0000 (10:51 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a Geode fix plus a microcode loader fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/intel: Clear patch pointer before jettisoning the initrd
x86/cpu/cyrix: Add alternative Device ID of Geode GX1 SoC
Linus Torvalds [Sat, 10 Jun 2017 17:22:35 +0000 (10:22 -0700)]
Merge branch 'rcu-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU fixes from Ingo Molnar:
"Fix an SRCU bug affecting KVM IRQ injection"
* 'rcu-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
srcu: Allow use of Classic SRCU from both process and interrupt context
srcu: Allow use of Tiny/Tree SRCU from both process and interrupt context
Linus Torvalds [Sat, 10 Jun 2017 05:30:55 +0000 (22:30 -0700)]
Merge tag 'iommu-fixes-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- another compile-fix for my header cleanup
- a couple of fixes for the recently merged IOMMU probe deferal code
- fixes for ACPI/IORT code necessary with IOMMU probe deferal
* tag 'iommu-fixes-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
arm: dma-mapping: Reset the device's dma_ops
ACPI/IORT: Move the check to get iommu_ops from translated fwspec
ARM: dma-mapping: Don't tear down third-party mappings
ACPI/IORT: Ignore all errors except EPROBE_DEFER
iommu/of: Ignore all errors except EPROBE_DEFER
iommu/of: Fix check for returning EPROBE_DEFER
iommu/dma: Fix function declaration
Linus Torvalds [Sat, 10 Jun 2017 05:28:33 +0000 (22:28 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- mark "guest" RMI device as pass-through port to avoid "phantom" ALPS
toouchpad on newer Lenovo Carbons
- add two more laptops to the Elantech's lists of devices using CRC
mode
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - register F03 port as pass-through serio
Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabled
Linus Torvalds [Sat, 10 Jun 2017 05:18:41 +0000 (22:18 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A set of fixes in the area of block IO, that should go into the next
-rc release. This contains:
- An OOPS fix from Dmitry, fixing a regression with the bio integrity
code in this series.
- Fix truncation of elevator io context cache name, from Eric
Biggers.
- NVMe pull from Christoph includes FC fixes from James, APST
fixes/tweaks from Kai-Heng, removal fix from Rakesh, and an RDMA
fix from Sagi.
- Two tweaks for the block throttling code. One from Joseph Qi,
fixing an oops from the timer code, and one from Shaohua, improving
the behavior on rotatonal storage.
- Two blk-mq fixes from Ming, fixing corner cases with the direct
issue code.
- Locking fix for bfq cgroups from Paolo"
* 'for-linus' of git://git.kernel.dk/linux-block:
block, bfq: access and cache blkg data only when safe
Fix loop device flush before configure v3
blk-throttle: set default latency baseline for harddisk
blk-throttle: fix NULL pointer dereference in throtl_schedule_pending_timer
nvme: relax APST default max latency to 100ms
nvme: only consider exit latency when choosing useful non-op power states
nvme-fc: fix missing put reference on controller create failure
nvme-fc: on lldd/transport io error, terminate association
nvme-rdma: fast fail incoming requests while we reconnect
nvme-pci: fix multiple ctrl removal scheduling
nvme: fix hang in remove path
elevator: fix truncation of icq_cache_name
blk-mq: fix direct issue
blk-mq: pass correct hctx to blk_mq_try_issue_directly
bio-integrity: Do not allocate integrity context for bio w/o data
Linus Torvalds [Sat, 10 Jun 2017 05:15:08 +0000 (22:15 -0700)]
Merge tag 'sound-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This update contains a slightly hight amount of changes due to the
pending ASoC fixes:
- ALSA timer core got a couple of fixes for races between read and
ioctl, leading to potential read of uninitialized kmalloced memory
- ASoC core fixed the de-registration pattern for use-after-free bug
- The rewrite of probe code in ASoC Intel Skylake for i915 component
- ASoC R-snd got a series of fixes for SSI
- ASoC simple-card, atmel, da7213, and rt286 trivial fixes
- HD-audio ALC269 quirk and rearrangement of quirk table"
* tag 'sound-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT
ALSA: timer: Fix race between read and ioctl
ALSA: hda/realtek - Reorder ALC269 ASUS quirk entries
ALSA: hda/realtek: Fix mic and headset jack sense on Asus X705UD
ASoC: rsnd: fixup parent_clk_name of AUDIO_CLKOUTx
ASoC: Intel: Skylake: Fix to parse consecutive string tkns in manifest
ASoC: Intel: Skylake: Fix IPC rx_list corruption
ASoC: rsnd: SSI PIO adjust to 24bit mode
MAINTAINERS: Update email address for patches to Wolfson parts
ASoC: Fix use-after-free at card unregistration
ASoC: simple-card: fix mic jack initialization
ASoC: rsnd: don't call free_irq() on Parent SSI
ASoC: atmel-classd: sync regcache when resuming
ASoC: rsnd: don't use PDTA bit for 24bit on SSI
ASoC: da7213: Fix incorrect usage of bitwise '&' operator for SRM check
rt286: add Thinkpad Helix 2 to force_combo_jack_table
ASoC: Intel: Skylake: Move i915 registration to worker thread
Linus Torvalds [Sat, 10 Jun 2017 05:12:06 +0000 (22:12 -0700)]
Merge tag 'drm-fixes-for-v4.12-rc5' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Intel, nouveau, rockchip, vmwgfx, imx, meson, mediatek and core fixes.
Bit more spread out fixes this time, fixes for 7 drivers + a couple of
core fixes.
i915 and vmwgfx are the main ones. The vmwgfx ones fix a bunch of
regressions in their atomic rework, and a few fixes destined for
stable. i915 has some 4.12 regressions and older things that need to
be fixed in stable as well.
nouveau also has some runtime pm fixes and a timer list handling fix,
otherwise a couple of core and small driver regression fixes"
* tag 'drm-fixes-for-v4.12-rc5' of git://people.freedesktop.org/~airlied/linux: (37 commits)
drm/i915: fix warning for unused variable
drm/meson: Fix driver bind when only CVBS is available
drm/i915: Fix 90/270 rotated coordinates for FBC
drm/i915: Restore has_fbc=1 for ILK-M
drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail
drm/i915: Fix logical inversion for gen4 quirking
drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally
drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.
drm/i915: Prevent the system suspend complete optimization
drm/i915/psr: disable psr2 for resolution greater than 32X20
drm/i915: Hold a wakeref for probing the ring registers
drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle
drm/i915: Disable decoupled MMIO
drm/i915/guc: Remove stale comment for q_fail
drm/vmwgfx: Bump driver minor and date
drm/vmwgfx: Remove unused legacy cursor functions
drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds"
drm/vmwgfx: Fix large topology crash
drm/vmwgfx: Make sure to update STDU when FB is updated
drm/vmwgfx: Make sure backup_handle is always valid
...
Al Viro [Fri, 9 Jun 2017 20:20:34 +0000 (16:20 -0400)]
excessive checks in ufs_write_failed() and ufs_evict_inode()
As it is, short copy in write() to append-only file will fail
to truncate the excessive allocated blocks. As the matter of
fact, all checks in ufs_truncate_blocks() are either redundant
or wrong for that caller. As for the only other caller
(ufs_evict_inode()), we only need the file type checks there.
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Omar Sandoval [Fri, 2 Jun 2017 08:20:01 +0000 (01:20 -0700)]
Btrfs: fix delalloc accounting leak caused by u32 overflow
btrfs_calc_trans_metadata_size() does an unsigned 32-bit multiplication,
which can overflow if num_items >= 4 GB / (nodesize * BTRFS_MAX_LEVEL * 2).
For a nodesize of 16kB, this overflow happens at 16k items. Usually,
num_items is a small constant passed to btrfs_start_transaction(), but
we also use btrfs_calc_trans_metadata_size() for metadata reservations
for extent items in btrfs_delalloc_{reserve,release}_metadata().
In drop_outstanding_extents(), num_items is calculated as
inode->reserved_extents - inode->outstanding_extents. The difference
between these two counters is usually small, but if many delalloc
extents are reserved and then the outstanding extents are merged in
btrfs_merge_extent_hook(), the difference can become large enough to
overflow in btrfs_calc_trans_metadata_size().
The overflow manifests itself as a leak of a multiple of 4 GB in
delalloc_block_rsv and the metadata bytes_may_use counter. This in turn
can cause early ENOSPC errors. Additionally, these WARN_ONs in
extent-tree.c will be hit when unmounting:
Fix it by casting nodesize to a u64 so that
btrfs_calc_trans_metadata_size() does a full 64-bit multiplication.
While we're here, do the same in btrfs_calc_trunc_metadata_size(); this
can't overflow with any existing uses, but it's better to be safe here
than have another hard-to-debug problem later on.
Cc: stable@vger.kernel.org Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Liu Bo [Fri, 26 May 2017 23:44:23 +0000 (17:44 -0600)]
Btrfs: clear EXTENT_DEFRAG bits in finish_ordered_io
Before this, we use 'filled' mode here, ie. if all range has been
filled with EXTENT_DEFRAG bits, get to clear it, but if the defrag
range joins the adjacent delalloc range, then we'll have EXTENT_DEFRAG
bits in extent_state until releasing this inode's pages, and that
prevents extent_data from being freed.
This clears the bit if any was found within the ordered extent.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Su Yue [Wed, 24 May 2017 01:31:32 +0000 (09:31 +0800)]
btrfs: tree-log.c: Wrong printk information about namelen
In verify_dir_item, it wants to printk name_len of dir_item but
printk data_len acutally.
Fix it by calling btrfs_dir_name_len instead of btrfs_dir_data_len.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Linus Torvalds [Fri, 9 Jun 2017 16:59:51 +0000 (09:59 -0700)]
Merge tag 'for-linus-4.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for Xen on ARM when dealing with 64kB page size of a guest"
* tag 'for-linus-4.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: Support correctly 64KB page granularity when mapping memory
Dmitry Torokhov [Tue, 6 Jun 2017 20:05:03 +0000 (13:05 -0700)]
Input: synaptics-rmi4 - register F03 port as pass-through serio
The 5th generation Thinkpad X1 Carbons use Synaptics touchpads accessible
over SMBus/RMI, combined with ALPS or Elantech trackpoint devices instead
of classic IBM/Lenovo trackpoints. Unfortunately there is no way for ALPS
driver to detect whether it is dealing with touchpad + trackpoint
combination or just a trackpoint, so we end up with a "phantom" dualpoint
ALPS device in addition to real touchpad and trackpoint.
Given that we do not have any special advanced handling for ALPS or
Elantech trackpoints (unlike IBM trackpoints that have separate driver and
a host of options) we are better off keeping the trackpoints in PS/2
emulation mode. We achieve that by setting serio type to SERIO_PS_PSTHRU,
which will limit number of protocols psmouse driver will try. In addition
to getting rid of the "phantom" touchpads, this will also speed up probing
of F03 pass-through port.
Reported-by: Damjan Georgievski <gdamjan@gmail.com> Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Fri, 9 Jun 2017 16:44:46 +0000 (09:44 -0700)]
Merge tag 'powerpc-4.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Mostly fairly minor, of note are:
- Fix percpu allocations to be NUMA aware
- Limit 4k page size config to 64TB virtual address space
- Avoid needlessly restoring FP and vector registers
Thanks to Aneesh Kumar K.V, Breno Leitao, Christophe Leroy, Frederic
Barrat, Madhavan Srinivasan, Michael Bringmann, Nicholas Piggin,
Vaibhav Jain"
* tag 'powerpc-4.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/book3s64: Move PPC_DT_CPU_FTRs and enable it by default
powerpc/mm/4k: Limit 4k page size config to 64TB virtual address space
cxl: Fix error path on bad ioctl
powerpc/perf: Fix Power9 test_adder fields
powerpc/numa: Fix percpu allocations to be NUMA aware
cxl: Avoid double free_irq() for psl,slice interrupts
powerpc/kernel: Initialize load_tm on task creation
powerpc/kernel: Fix FP and vector register restoration
powerpc/64: Reclaim CPU_FTR_SUBCORE
powerpc/hotplug-mem: Fix missing endian conversion of aa_index
powerpc/sysdev/simple_gpio: Fix oops in gpio save_regs function
powerpc/spufs: Fix coredump of SPU contexts
powerpc/64s: Add dt_cpu_ftrs boot time setup option
Linus Torvalds [Fri, 9 Jun 2017 16:40:08 +0000 (09:40 -0700)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Been sitting on these for a couple of weeks waiting on some larger
batches to come in but it's been pretty quiet.
Just your garden variety fixes here:
- A few maintainers updates (ep93xx, Exynos, TI, Marvell)
- Some PM fixes for Atmel/at91 and Marvell
- A few DT fixes for Marvell, Versatile, TI Keystone, bcm283x
- A reset driver patch to set module license for symbol access"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
MAINTAINERS: EP93XX: Update maintainership
MAINTAINERS: remove kernel@stlinux.com obsolete mailing list
ARM: dts: versatile: use #include "..." to include local DT
MAINTAINERS: add device-tree files to TI DaVinci entry
ARM: at91: select CONFIG_ARM_CPU_SUSPEND
ARM: dts: keystone-k2l: fix broken Ethernet due to disabled OSR
arm64: defconfig: enable some core options for 64bit Rockchip socs
arm64: marvell: dts: fix interrupts in 7k/8k crypto nodes
reset: hi6220: Set module license so that it can be loaded
MAINTAINERS: add irqchip related drivers to Marvell EBU maintainers
MAINTAINERS: sort F entries for Marvell EBU maintainers
ARM: davinci: PM: Do not free useful resources in normal path in 'davinci_pm_init'
ARM: davinci: PM: Free resources in error handling path in 'davinci_pm_init'
ARM: dts: bcm283x: Reserve first page for firmware
memory: atmel-ebi: mark PM ops as __maybe_unused
MAINTAINERS: Remove Javier Martinez Canillas as reviewer for Exynos
7b0a911478c7 efi/x86: Move the EFI BGRT init code to early init code
The root cause is the firmware on those machines provides invalid BGRT
image addresses.
In a kernel before above commit BGRT initializes late and uses ioremap()
to map the image address. Ioremap validates the address, if it is not a
valid physical address ioremap() just fails and returns. However in current
kernel EFI BGRT initializes early and uses early_memremap() which does not
validate the image address, and kernel panic happens.
According to ACPI spec the BGRT image address should fall into
EFI_BOOT_SERVICES_DATA, see the section 5.2.22.4 of below document:
Fix this issue by validating the image address in efi_bgrt_init(). If the
image address does not fall into any EFI_BOOT_SERVICES_DATA areas we just
bail out with a warning message.
Reported-by: Maniaxx <tripleshiftone@gmail.com> Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code") Link: http://lkml.kernel.org/r/20170609084558.26766-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 9 Jun 2017 06:17:10 +0000 (08:17 +0200)]
Merge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into rcu/urgent
Pull RCU fix from Paul E. McKenney:
" This series enables srcu_read_lock() and srcu_read_unlock() to be used from
interrupt handlers, which fixes a bug in KVM's use of SRCU in delivery
of interrupts to guest OSes. "
Dave Airlie [Fri, 9 Jun 2017 03:12:02 +0000 (13:12 +1000)]
Merge branch 'vmwgfx-fixes-4.12' of git://people.freedesktop.org/~thomash/linux into drm-fixes
A bunch of fixes for vmwgfx 4.12 regressions and older stuff. In the latter
case either trivial, cc'd stable or requiring backports for stable.
* 'vmwgfx-fixes-4.12' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Bump driver minor and date
drm/vmwgfx: Remove unused legacy cursor functions
drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds"
drm/vmwgfx: Fix large topology crash
drm/vmwgfx: Make sure to update STDU when FB is updated
drm/vmwgfx: Make sure backup_handle is always valid
drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()
drm/vmwgfx: Don't create proxy surface for cursor
drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()
Dave Airlie [Fri, 9 Jun 2017 02:18:07 +0000 (12:18 +1000)]
Merge tag 'drm-intel-fixes-2017-06-08' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes
drm/i915 fixes for v4.12-rc5
* tag 'drm-intel-fixes-2017-06-08' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: fix warning for unused variable
drm/i915: Fix 90/270 rotated coordinates for FBC
drm/i915: Restore has_fbc=1 for ILK-M
drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail
drm/i915: Fix logical inversion for gen4 quirking
drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally
drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.
drm/i915: Prevent the system suspend complete optimization
drm/i915/psr: disable psr2 for resolution greater than 32X20
drm/i915: Hold a wakeref for probing the ring registers
drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle
drm/i915: Disable decoupled MMIO
drm/i915/guc: Remove stale comment for q_fail
drm/i915: Serialize GTT/Aperture accesses on BXT
Dave Airlie [Fri, 9 Jun 2017 02:17:27 +0000 (12:17 +1000)]
Merge tag 'drm-misc-fixes-2017-06-07' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes
Driver Changes:
- kirin: Use correct dt port for the bridge (John)
- meson: Fix regression caused by adding HDMI support to allow board
configurations without HDMI (Neil)
Cc: John Stultz <john.stultz@linaro.org> Cc: Neil Armstrong <narmstrong@baylibre.com>
* tag 'drm-misc-fixes-2017-06-07' of git://anongit.freedesktop.org/git/drm-misc:
drm/meson: Fix driver bind when only CVBS is available
drm: kirin: Fix drm_of_find_panel_or_bridge conversion
Dave Airlie [Fri, 9 Jun 2017 02:16:25 +0000 (12:16 +1000)]
Merge tag 'imx-drm-fixes-2017-06-08' of git://git.pengutronix.de/git/pza/linux into drm-fixes
imx-drm: PRE clock gating, panelless LDB, and VDIC CSI selection fixes
- Keep the external clock input to the PRE ungated and only use the internal
soft reset to keep the module in low power state, to avoid sporadic startup
failures.
- Ignore -ENODEV return values from drm_of_find_panel_or_bridge in the LDB
driver to fix probing for devices that still do not specify a panel in the
device tree.
- Fix the CSI input selection to the VDIC. According to experiments, the real
behaviour differs a bit from the documentation.
* tag 'imx-drm-fixes-2017-06-08' of git://git.pengutronix.de/git/pza/linux:
gpu: ipu-v3: Fix CSI selection for VDIC
drm/imx: imx-ldb: Accept drm_of_find_panel_or_bridge failure
gpu: ipu-v3: pre: only use internal clock gating
Linus Torvalds [Fri, 9 Jun 2017 00:40:32 +0000 (17:40 -0700)]
Merge tag 'pm-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These revert one problematic commit related to system sleep and fix
one recent intel_pstate regression.
Specifics:
- Revert a recent commit that attempted to avoid spurious wakeups
from suspend-to-idle via ACPI SCI, but introduced regressions on
some systems (Rafael Wysocki).
We will get back to the problem it tried to address in the next
cycle.
- Fix a possible division by 0 during intel_pstate initialization
due to a missing check (Rafael Wysocki)"
* tag 'pm-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"
cpufreq: intel_pstate: Avoid division by 0 in min_perf_pct_min()
Namhyung Kim [Thu, 8 Jun 2017 07:31:09 +0000 (16:31 +0900)]
perf symbols: Kill dso__build_id_is_kmod()
The commit e7ee40475760 ("perf symbols: Fix symbols searching for module
in buildid-cache") added the function to check kernel modules reside in
the build-id cache. This was because there's no way to identify a DSO
which is actually a kernel module. So it searched linkname of the file
and find ".ko" suffix.
But this does not work for compressed kernel modules and now such DSOs
hCcave correct symtab_type now. So no need to check it anymore. This
patch essentially reverts the commit.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-10-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 8 Jun 2017 07:31:08 +0000 (16:31 +0900)]
perf symbols: Keep DSO->symtab_type after decompress
The symsrc__init() overwrites dso->symtab_type as symsrc->type in
dso__load_sym(). But for compressed kernel modules in the build-id
cache, it should have original symtab type to be decompressed as needed.
This fixes perf annotate to show disassembly of the function properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-9-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 8 Jun 2017 07:31:07 +0000 (16:31 +0900)]
perf tests: Decompress kernel module before objdump
If a kernel modules is compressed, it should be decompressed before
running objdump to parse binary data correctly. This fixes a failure of
object code reading test for me.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 8 Jun 2017 07:31:06 +0000 (16:31 +0900)]
perf tools: Consolidate error path in __open_dso()
On failure, it should free the 'name', so clean up the error path using
goto.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 8 Jun 2017 07:31:05 +0000 (16:31 +0900)]
perf tools: Decompress kernel module when reading DSO data
Currently perf decompresses kernel modules when loading the symbol table
but it missed to do it when reading raw data.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 8 Jun 2017 07:31:04 +0000 (16:31 +0900)]
perf annotate: Use dso__decompress_kmodule_path()
Convert open-coded decompress routine to use the function.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move decompress_kmodule() to util/dso.c and split it into two functions
returning fd and (decompressed) file path. The existing user only wants
the fd version but the path version will be used soon.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 8 Jun 2017 07:31:02 +0000 (16:31 +0900)]
perf tools: Fix a memory leak in __open_dso()
The 'name' variable should be freed on the error path.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 8 Jun 2017 07:31:01 +0000 (16:31 +0900)]
perf annotate: Fix symbolic link of build-id cache
The commit 6ebd2547dd24 ("perf annotate: Fix a bug following symbolic
link of a build-id file") changed to use dirname to follow the symlink.
But it only considers new-style build-id cache names so old names fail
on readlink() and force to use system path which might not available.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Fixes: 6ebd2547dd24 ("perf annotate: Fix a bug following symbolic link of a build-id file") Link: http://lkml.kernel.org/r/20170608073109.30699-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Thu, 8 Jun 2017 17:50:04 +0000 (10:50 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk fix from Petr Mladek:
"This reverts a fix added into 4.12-rc1. It caused the kernel log to be
printed on another console when two consoles of the same type were
defined, e.g. console=ttyS0 console=ttyS1.
This configuration was never supported by kernel itself, but it
started to make sense with systemd. In other words, the commit broke
userspace"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
Revert "printk: fix double printing with earlycon"
Linus Torvalds [Thu, 8 Jun 2017 17:02:58 +0000 (10:02 -0700)]
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a couple of places in the crypto code that were doing
interruptible sleeps dangerously. They have been converted to use
non-interruptible sleeps.
This also fixes a bug in asymmetric_keys where it would trigger a
use-after-free if a request returned EBUSY due to a full device queue"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: gcm - wait for crypto op not signal safe
crypto: drbg - wait for crypto op not signal safe
crypto: asymmetric_keys - handle EBUSY due to backlog correctly
Paolo Valente [Mon, 5 Jun 2017 08:11:15 +0000 (10:11 +0200)]
block, bfq: access and cache blkg data only when safe
In blk-cgroup, operations on blkg objects are protected with the
request_queue lock. This is no more the lock that protects
I/O-scheduler operations in blk-mq. In fact, the latter are now
protected with a finer-grained per-scheduler-instance lock. As a
consequence, although blkg lookups are also rcu-protected, blk-mq I/O
schedulers may see inconsistent data when they access blkg and
blkg-related objects. BFQ does access these objects, and does incur
this problem, in the following case.
The blkg_lookup performed in bfq_get_queue, being protected (only)
through rcu, may happen to return the address of a copy of the
original blkg. If this is the case, then the blkg_get performed in
bfq_get_queue, to pin down the blkg, is useless: it does not prevent
blk-cgroup code from destroying both the original blkg and all objects
directly or indirectly referred by the copy of the blkg. BFQ accesses
these objects, which typically causes a crash for NULL-pointer
dereference of memory-protection violation.
Some additional protection mechanism should be added to blk-cgroup to
address this issue. In the meantime, this commit provides a quick
temporary fix for BFQ: cache (when safe) blkg data that might
disappear right after a blkg_lookup.
In particular, this commit exploits the following facts to achieve its
goal without introducing further locks. Destroy operations on a blkg
invoke, as a first step, hooks of the scheduler associated with the
blkg. And these hooks are executed with bfqd->lock held for BFQ. As a
consequence, for any blkg associated with the request queue an
instance of BFQ is attached to, we are guaranteed that such a blkg is
not destroyed, and that all the pointers it contains are consistent,
while that instance is holding its bfqd->lock. A blkg_lookup performed
with bfqd->lock held then returns a fully consistent blkg, which
remains consistent until this lock is held. In more detail, this holds
even if the returned blkg is a copy of the original one.
Finally, also the object describing a group inside BFQ needs to be
protected from destruction on the blkg_free of the original blkg
(which invokes bfq_pd_free). This commit adds private refcounting for
this object, to let it disappear only after no bfq_queue refers to it
any longer.
This commit also removes or updates some stale comments on locking
issues related to blk-cgroup operations.
Reported-by: Tomas Konir <tomas.konir@gmail.com> Reported-by: Lee Tibbert <lee.tibbert@gmail.com> Reported-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Tomas Konir <tomas.konir@gmail.com> Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
Paolo Bonzini [Wed, 31 May 2017 12:03:11 +0000 (14:03 +0200)]
srcu: Allow use of Classic SRCU from both process and interrupt context
Linu Cherian reported a WARN in cleanup_srcu_struct() when shutting
down a guest running iperf on a VFIO assigned device. This happens
because irqfd_wakeup() calls srcu_read_lock(&kvm->irq_srcu) in interrupt
context, while a worker thread does the same inside kvm_set_irq(). If the
interrupt happens while the worker thread is executing __srcu_read_lock(),
updates to the Classic SRCU ->lock_count[] field or the Tree SRCU
->srcu_lock_count[] field can be lost.
The docs say you are not supposed to call srcu_read_lock() and
srcu_read_unlock() from irq context, but KVM interrupt injection happens
from (host) interrupt context and it would be nice if SRCU supported the
use case. KVM is using SRCU here not really for the "sleepable" part,
but rather due to its IPI-free fast detection of grace periods. It is
therefore not desirable to switch back to RCU, which would effectively
revert commit 719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING",
2014-01-16).
However, the docs are overly conservative. You can have an SRCU instance
only has users in irq context, and you can mix process and irq context
as long as process context users disable interrupts. In addition,
__srcu_read_unlock() actually uses this_cpu_dec() on both Tree SRCU and
Classic SRCU. For those two implementations, only srcu_read_lock()
is unsafe.
When Classic SRCU's __srcu_read_unlock() was changed to use this_cpu_dec(),
in commit 5a41344a3d83 ("srcu: Simplify __srcu_read_unlock() via
this_cpu_dec()", 2012-11-29), __srcu_read_lock() did two increments.
Therefore it kept __this_cpu_inc(), with preempt_disable/enable in
the caller. Tree SRCU however only does one increment, so on most
architectures it is more efficient for __srcu_read_lock() to use
this_cpu_inc(), and any performance differences appear to be down in
the noise.
Cc: stable@vger.kernel.org Fixes: 719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING") Reported-by: Linu Cherian <linuc.decode@gmail.com> Suggested-by: Linu Cherian <linuc.decode@gmail.com> Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paolo Bonzini [Wed, 31 May 2017 12:03:10 +0000 (14:03 +0200)]
srcu: Allow use of Tiny/Tree SRCU from both process and interrupt context
Linu Cherian reported a WARN in cleanup_srcu_struct() when shutting
down a guest running iperf on a VFIO assigned device. This happens
because irqfd_wakeup() calls srcu_read_lock(&kvm->irq_srcu) in interrupt
context, while a worker thread does the same inside kvm_set_irq(). If the
interrupt happens while the worker thread is executing __srcu_read_lock(),
updates to the Classic SRCU ->lock_count[] field or the Tree SRCU
->srcu_lock_count[] field can be lost.
The docs say you are not supposed to call srcu_read_lock() and
srcu_read_unlock() from irq context, but KVM interrupt injection happens
from (host) interrupt context and it would be nice if SRCU supported the
use case. KVM is using SRCU here not really for the "sleepable" part,
but rather due to its IPI-free fast detection of grace periods. It is
therefore not desirable to switch back to RCU, which would effectively
revert commit 719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING",
2014-01-16).
However, the docs are overly conservative. You can have an SRCU instance
only has users in irq context, and you can mix process and irq context
as long as process context users disable interrupts. In addition,
__srcu_read_unlock() actually uses this_cpu_dec() on both Tree SRCU and
Classic SRCU. For those two implementations, only srcu_read_lock()
is unsafe.
When Classic SRCU's __srcu_read_unlock() was changed to use this_cpu_dec(),
in commit 5a41344a3d83 ("srcu: Simplify __srcu_read_unlock() via
this_cpu_dec()", 2012-11-29), __srcu_read_lock() did two increments.
Therefore it kept __this_cpu_inc(), with preempt_disable/enable in
the caller. Tree SRCU however only does one increment, so on most
architectures it is more efficient for __srcu_read_lock() to use
this_cpu_inc(), and any performance differences appear to be down in
the noise.
Unlike Classic and Tree SRCU, Tiny SRCU does increments and decrements on
a single variable. Therefore, as Peter Zijlstra pointed out, Tiny SRCU's
implementation already supports mixed-context use of srcu_read_lock()
and srcu_read_unlock(), at least as long as uses of srcu_read_lock()
and srcu_read_unlock() in each handler are nested and paired properly.
In other words, it is still illegal to (say) invoke srcu_read_lock()
in an interrupt handler and to invoke the matching srcu_read_unlock()
in a softirq handler. Therefore, the only change required for Tiny SRCU
is to its comments.
Fixes: 719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING") Reported-by: Linu Cherian <linuc.decode@gmail.com> Suggested-by: Linu Cherian <linuc.decode@gmail.com> Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Paolo Bonzini <pbonzini@redhat.com>
James Wang [Thu, 8 Jun 2017 06:52:51 +0000 (14:52 +0800)]
Fix loop device flush before configure v3
While installing SLES-12 (based on v4.4), I found that the installer
will stall for 60+ seconds during LVM disk scan. The root cause was
determined to be the removal of a bound device check in loop_flush()
by commit b5dd2f6047ca ("block: loop: improve performance via blk-mq").
Restoring this check, examining ->lo_state as set by loop_set_fd()
eliminates the bad behavior.
Test method:
modprobe loop max_loop=64
dd if=/dev/zero of=disk bs=512 count=200K
for((i=0;i<4;i++))do losetup -f disk; done
mkfs.ext4 -F /dev/loop0
for((i=0;i<4;i++))do mkdir t$i; mount /dev/loop$i t$i;done
for f in `ls /dev/loop[0-9]*|sort`; do \
echo $f; dd if=$f of=/dev/null bs=512 count=1; \
done
Note that from loop10 onward, the device is not mounted, yet the
stock kernel consumes several orders of magnitude more wall time
than it does for a mounted device.
(Thanks for Mike Galbraith <efault@gmx.de>, give a changelog review.)
Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: James Wang <jnwang@suse.com> Fixes: b5dd2f6047ca ("block: loop: improve performance via blk-mq") Signed-off-by: Jens Axboe <axboe@fb.com>
powerpc/book3s64: Move PPC_DT_CPU_FTRs and enable it by default
The PPC_DT_CPU_FTRs is a bit misplaced in menuconfig, it shows up with
other general kernel options. It's really more at home in the "Platform
Support" section, so move it there.
Also enable it by default, for Book3s 64. It does mostly nothing unless
the device tree properties are found, and we will want it enabled
eventually in distro kernels, so turn it on to start getting more
testing.
Fixes: 5a61ef74f269 ("powerpc/64s: Support new device tree binding for discovering CPU features") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/mm/4k: Limit 4k page size config to 64TB virtual address space
Supporting 512TB requires us to do a order 3 allocation for level 1 page
table (pgd). This results in page allocation failures with certain workloads.
For now limit 4k linux page size config to 64TB.
Fixes: f6eedbba7a26 ("powerpc/mm/hash: Increase VA range to 128TB") Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The commit regression to users that define both console=ttyS1
and console=ttyS0 on the command line, see
https://lkml.kernel.org/r/20170509082915.GA13236@bistromath.localdomain
The kernel log messages always appeared only on one serial port. It is
even documented in Documentation/admin-guide/serial-console.rst:
"Note that you can only define one console per device type (serial,
video)."
The above mentioned commit changed the order in which the command line
parameters are searched. As a result, the kernel log messages go to
the last mentioned ttyS* instead of the first one.
We long thought that using two console=ttyS* on the command line
did not make sense. But then we realized that console= parameters
were handled also by systemd, see
http://0pointer.de/blog/projects/serial-console.html
"By default systemd will instantiate one serial-getty@.service on
the main kernel console, if it is not a virtual terminal."
where
"[4] If multiple kernel consoles are used simultaneously, the main
console is the one listed first in /sys/class/tty/console/active,
which is the last one listed on the kernel command line."
This puts the original report into another light. The system is running
in qemu. The first serial port is used to store the messages into a file.
The second one is used to login to the system via a socket. It depends
on systemd and the historic kernel behavior.
By other words, systemd causes that it makes sense to define both
console=ttyS1 console=ttyS0 on the command line. The kernel fix
caused regression related to userspace (systemd) and need to be
reverted.
In addition, it went out that the fix helped only partially.
The messages still were duplicated when the boot console was
removed early by late_initcall(printk_late_init). Then the entire
log was replayed when the same console was registered as a normal one.
x86/microcode/intel: Clear patch pointer before jettisoning the initrd
During early boot, load_ucode_intel_ap() uses __load_ucode_intel()
to obtain a pointer to the relevant microcode patch (embedded in the
initrd), and stores this value in 'intel_ucode_patch' to speed up the
microcode patch application for subsequent CPUs.
On resuming from suspend-to-RAM, however, load_ucode_ap() calls
load_ucode_intel_ap() for each non-boot-CPU. By then the initramfs is
long gone so the pointer stored in 'intel_ucode_patch' no longer points to
a valid microcode patch.
Clear that pointer so that we effectively fall back to the CPU hotplug
notifier callbacks to update the microcode.
Jessica Yu [Thu, 8 Jun 2017 06:52:36 +0000 (23:52 -0700)]
MAINTAINERS: update email address for Jessica Yu
I will be traveling in the upcoming months and it'll be much easier for me
to access my kernel.org email rather than my work one. Change my email
address in the MAINTAINERS file from jeyu@redhat.com to jeyu@kernel.org.
SeongJae Park [Tue, 30 May 2017 11:18:25 +0000 (20:18 +0900)]
perf script python: Remove dups in documentation examples
Few shell command examples in perf-script-python.txt has few nitpicks
include:
- tools/perf/scripts/python directory listing command is unnecessarily
repeated.
- few examples contain additional information in command prompt
unnecessarily and inconsistently.
This commit fixes them to enhance readability of the document.
Signed-off-by: SeongJae Park <sj38.park@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tom Zanussi <tzanussi@gmail.com> Fixes: cff68e582237 ("perf/scripts: Add perf-trace-python Documentation") Link: http://lkml.kernel.org/r/20170530111827.21732-4-sj38.park@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Default function signature of trace_unhandled() got changed to include a
field dict, but its documentation, perf-script-python.txt has not been
updated. Fix it.
Signed-off-by: SeongJae Park <sj38.park@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Pierre Tardy <tardyp@gmail.com> Fixes: c02514850d67 ("perf scripts python: Give field dict to unhandled callback") Link: http://lkml.kernel.org/r/20170530111827.21732-6-sj38.park@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SeongJae Park [Tue, 30 May 2017 11:18:23 +0000 (20:18 +0900)]
perf script: Fix outdated comment for perf-trace-python
Script generated by the '--gen-script' option contains an outdated
comment. It mentions a 'perf-trace-python' document while it has been
renamed to 'perf-script-python'. Fix it.
Signed-off-by: SeongJae Park <sj38.park@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 133dc4c39c57 ("perf: Rename 'perf trace' to 'perf script'") Link: http://lkml.kernel.org/r/20170530111827.21732-2-sj38.park@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Wed, 7 Jun 2017 15:50:19 +0000 (17:50 +0200)]
Merge tag 'perf-urgent-for-mingo-4.12-20170606' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Only print NMI watchdog hint in 'perf stat' when it is enabled (Andi Kleen)
- Fix sys_mmap/sys_old_mmap shandling in s390 in 'perf trace' (Jiri Olsa)
- Disable breakpoint signal tests in powerpc, that lacks the perf kernel
glue to set breakpoint events and makes 'perf test' always fail (Jiri Olsa)
- Fix 'perf annotate' for branch instruction with multiple operands (Kim Phillips)
- Add missing powerpc triplet when disassembling with 'objdump' in 'perf
annotate' (Kim Phillips)
- Do not trow away partial unwound stacks when using libdw, making
callchains produced with it similar to those produced when linked with
the other DWARF unwind library supported in perf, libunwind (Milian Wolff)
- Fixes to properly handle kernel modules when processing build-id meta
events (Namhyung Kim)
- Fix handling of compressed modules in the build-id cache (Namhyung Kim)
- Fix 'perf annotate' failure when filename has special chars (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
Shaohua Li [Tue, 6 Jun 2017 19:40:43 +0000 (12:40 -0700)]
blk-throttle: set default latency baseline for harddisk
hard disk IO latency varies a lot depending on spindle move. The latency
range could be from several microseconds to several milliseconds. It's
pretty hard to get the baseline latency used by io.low.
We will use a different stragety here. The idea is only using IO with
spindle move to determine if cgroup IO is in good state. For HD, if io
latency is small (< 1ms), we ignore the IO. Such IO is likely from
sequential IO, and is helpless to help determine if a cgroup's IO is
impacted by other cgroups. With this, we only account IO with big
latency. Then we can choose a hardcoded baseline latency for HD (4ms,
which is typical IO latency with seek). With all these settings, the
io.low latency works for both HD and SSD.
Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
Neil Armstrong [Mon, 29 May 2017 14:15:52 +0000 (16:15 +0200)]
drm/meson: Fix driver bind when only CVBS is available
While introducing HDMI support, component matching on connectors node
were bypassed since no driver would actually bind on the DT node.
But when only a CVBS connector is present, only a single node is found
in the graph, but ignored and a NULL match table is given to the
component code.
This code permits bypassing the components framework by binding directly
the DRM driver when no components needs to be loaded.
Joseph Qi [Wed, 7 Jun 2017 03:36:14 +0000 (11:36 +0800)]
blk-throttle: fix NULL pointer dereference in throtl_schedule_pending_timer
I have encountered a NULL pointer dereference in
throtl_schedule_pending_timer:
[ 413.735396] BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
[ 413.735535] IP: [<ffffffff812ebbbf>] throtl_schedule_pending_timer+0x3f/0x210
[ 413.735643] PGD 22c8cf067 PUD 22cb34067 PMD 0
[ 413.735713] Oops: 0000 [#1] SMP
......
This is caused by the following case:
blk_throtl_bio
throtl_schedule_next_dispatch <= sq is top level one without parent
throtl_schedule_pending_timer
sq_to_tg(sq)->td->throtl_slice <= sq_to_tg(sq) returns NULL
Fix it by using sq_to_td instead of sq_to_tg(sq)->td, which will always
return a valid td.
Fixes: 297e3d854784 ("blk-throttle: make throtl_slice tunable") Signed-off-by: Joseph Qi <qijiang.qj@alibaba-inc.com> Reviewed-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
Ville Syrjälä [Fri, 31 Mar 2017 18:00:56 +0000 (21:00 +0300)]
drm/i915: Fix 90/270 rotated coordinates for FBC
The clipped src coordinates have already been rotated by 270 degrees for
when the plane rotation is 90/270 degrees, hence the FBC code should no
longer swap the width and height.
Cc: stable@vger.kernel.org Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170331180056.14086-4-ville.syrjala@linux.intel.com Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 73714c05df97d7527e7eaaa771472ef2ede46fa3) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The scanline counter is bonkers on VLV/CHV DSI. The scanline counter
increment is not lined up with the start of vblank like it is on
every other platform and output type. This causes problems for
both the vblank timestamping and atomic update vblank evasion.
On my FFRD8 machine at least, the scanline counter increment
happens about 1/3 of a scanline ahead of the start of vblank (which
is where all register latching happens still). That means we can't
trust the scanline counter to tell us whether we're in vblank or not
while we're on that particular line. In order to keep vblank
timestamping in working condition when called from the vblank irq,
we'll leave scanline_offset at one, which means that the entire
line containing the start of vblank is considered to be inside
the vblank.
For the vblank evasion we'll need to consider that entire line
to be bad, since we can't tell whether the registers already
got latched or not. And we can't actually use the start of vblank
interrupt to get us past that line as the interrupt would fire
too soon, and then we'd up waiting for the next start of vblank
instead. One way around that would using the frame start
interrupt instead since that wouldn't fire until the next
scanline, but that would require some bigger changes in the
interrupt code. So for simplicity we'll just poll until we get
past the bad line.
Chris Wilson [Sun, 21 May 2017 12:40:14 +0000 (13:40 +0100)]
drm/i915: Fix logical inversion for gen4 quirking
The assertion that we want to make before disabling the pin of the pages
for the unknown swizzling quirk is that the quirk is indeed active, and
that the quirk is disabled before we do apply it to the pages.
Fixes: 2c3a3f44dc13 ("drm/i915: Fix pages pin counting around swizzle quirk") Fixes: 957870f93412 ("drm/i915: Split out i915_gem_object_set_tiling()") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170521124014.27678-1-chris@chris-wilson.co.uk
Reviewed-bhy: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 20bb377106af69d16269b1837e9a945b9f508a2e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Wed, 31 May 2017 19:05:14 +0000 (20:05 +0100)]
drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally
Commit 7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon
insertion") added the restoration of the invalidation routine after the
GuC was disabled, but missed that the GuC was unconditionally disabled
when not used. This then overwrites the invalidate routine for the older
chipsets, causing havoc and breaking resume as the most obvious victim.
We place the guard inside i915_ggtt_disable_guc() to be backport
friendly (the bug was introduced into v4.11) but it would be preferred
to be in more control over when this was guard (i.e. do not try and
teardown the data structures before we have enabled them). That should
be true with the reorganisation of the guc loaders.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon insertion") Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: <stable@vger.kernel.org> # v4.11+ Link: http://patchwork.freedesktop.org/patch/msgid/20170531190514.3691-1-chris@chris-wilson.co.uk Reviewed-by: Michel Thierry <michel.thierry@intel.com>
(cherry picked from commit cb60606d835ca8b2f744835116bcabe64ce88849) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.
On some systems there can be a race condition in which no crtc state is
added to the first atomic commit. This results in all crtc's having a
null DDB allocation, causing a FIFO underrun on any update until the
first modeset.
Changes since v1:
- Do not take the connection_mutex, this is already done below.
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Inspired-by: Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 98d39494d375 ("drm/i915/gen9: Compute DDB allocation at atomic
check time (v4)") Cc: <stable@vger.kernel.org> # v4.8+ Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170531154236.27180-1-maarten.lankhorst@linux.intel.com Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 367d73d2806085bb507ab44c1f532640917fd5ca) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
PCI / PM: Avoid resuming PCI devices during system suspend
PCI devices will default to allowing the system suspend complete
optimization where devices are not woken up during system suspend if
they were already runtime suspended. This however breaks the i915/HDA
drivers for two reasons:
- The i915 driver has system suspend specific steps that it needs to
run, that bring the device to a different state than its runtime
suspended state.
- The HDA driver's suspend handler requires power that it will request
from the i915 driver's power domain handler. This in turn requires the
i915 driver to runtime resume itself, but this won't be possible if the
suspend complete optimization is in effect: in this case the i915
runtime PM is disabled and trying to get an RPM reference returns
-EACCESS.
Solve this by requiring the PCI/PM core to resume the device during
system suspend which in effect disables the suspend complete optimization.
Regardless of the above commit the optimization stayed disabled for DRM
devices until
so this patch is in practice a fix for this commit. Another reason for
the bug staying hidden for so long is that the optimization for a device
is disabled if it's disabled for any of its children devices. i915 may
have a backlight device as its child which doesn't support runtime PM
and so doesn't allow the optimization either. So if this backlight
device got registered the bug stayed hidden.
Credits to Marta, Tomi and David who enabled pstore logging,
that caught one instance of this issue across a suspend/
resume-to-ram and Ville who rememberd that the optimization was enabled
for some devices at one point.
drm/i915/psr: disable psr2 for resolution greater than 32X20
psr1 is also disabled for panel resolution greater than 32X20.
Added psr2 check to disable only for psr2 panels having resolution
greater than 32X20.
issue was introduced by
commit-id : "acf45d11050abd751dcec986ab121cb2367dcbba"
commit message: "PSR2 is restricted to work with panel resolutions
upto 3200x2000, move the check to intel_psr_match_conditions and fully
block psr."
v2: (Rodrigo)
Add previous commit details which introduced the issue
Fixes: acf45d11050a ("drm/i915/psr: disable psr2 for resolution greater than 32X20") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Yaroslav Shabalin <yaroslav.shabalin@gmail.com> Reported-by: Yaroslav Shabalin <yaroslav.shabalin@gmail.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/49935bdff896ee3140bed471012b9f9110a863a4.1495729964.git.vathsala.nagaraju@intel.com
(cherry picked from commit bef8c056fba09aa4629fe5a2d3efe64068d049db) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Tue, 30 May 2017 12:13:33 +0000 (13:13 +0100)]
drm/i915: Hold a wakeref for probing the ring registers
Allow intel_engine_is_idle() to be called outside of the GT wakeref by
acquiring the device runtime pm for ourselves. This allows the function
to act as check after we assume the engine is idle and we release the GT
wakeref held whilst we have requests. At the moment, we do not call it
outside of an awake context but taking the wakeref as required makes it
more convenient to use for quick debugging in future.
Chris Wilson [Tue, 30 May 2017 12:13:32 +0000 (13:13 +0100)]
drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle
If the device is asleep (no GT wakeref), we know the GPU is already idle.
If we add an early return, we can avoid touching registers and checking
hw state outside of the assumed GT wakelock. This prevents causing such
errors whilst debugging:
Fixes: 25112b64b3d2 ("drm/i915: Wait for all engines to be idle as part of i915_gem_wait_for_idle()") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 863e9fde1a7061dad09bb299c65bed5f1ccb44ff) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Kai Chen [Tue, 23 May 2017 21:58:11 +0000 (14:58 -0700)]
drm/i915: Disable decoupled MMIO
The decoupled MMIO feature doesn't work as intended by HW team. Enabling
it with forcewake will only make debugging efforts more difficult, so
let's disable it.
Fixes: 85ee17ebeedd ("drm/i915/bxt: Broxton decoupled MMIO") Cc: Zhe Wang <zhe1.wang@intel.com> Cc: Praveen Paneri <praveen.paneri@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Kai Chen <kai.chen@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170523215812.18328-2-kai.chen@intel.com
(cherry picked from commit 0051c10acabb631cfd439eae73289e6e4c39b2b7) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Sinclair Yeh [Fri, 2 Jun 2017 05:55:50 +0000 (07:55 +0200)]
drm/vmwgfx: Fix large topology crash
The previous attempt at this had an issue with with num_clips > 1
because it would always end up using the coordinates of the last
clip while using width and height calculated from the bounding
box of all the clips.
So if the last clip happens to be not at the top-left corner of
the bounding box, the CPU blit operation would go out of bounds.
The original intent was to coalesce all the clips into one blit,
and to do that we need to also track the starting point of the
content buffer.
Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Sinclair Yeh [Fri, 2 Jun 2017 05:50:57 +0000 (07:50 +0200)]
drm/vmwgfx: Make sure backup_handle is always valid
When vmw_gb_surface_define_ioctl() is called with an existing buffer,
we end up returning an uninitialized variable in the backup_handle.
The fix is to first initialize backup_handle to 0 just to be sure, and
second, when a user-provided buffer is found, we will use the
req->buffer_handle as the backup_handle.
Vladis Dronov [Fri, 2 Jun 2017 05:42:09 +0000 (07:42 +0200)]
drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()
The 'req->mip_levels' parameter in vmw_gb_surface_define_ioctl() is
a user-controlled 'uint32_t' value which is used as a loop count limit.
This can lead to a kernel lockup and DoS. Add check for 'req->mip_levels'.
Jon Bloomfield [Wed, 24 May 2017 15:54:11 +0000 (08:54 -0700)]
drm/i915: Serialize GTT/Aperture accesses on BXT
BXT has a H/W issue with IOMMU which can lead to system hangs when
Aperture accesses are queued within the GAM behind GTT Accesses.
This patch avoids the condition by wrapping all GTT updates in stop_machine
and using a flushing read prior to restarting the machine.
The stop_machine guarantees no new Aperture accesses can begin while
the PTE writes are being emmitted. The flushing read ensures that
any following Aperture accesses cannot begin until the PTE writes
have been cleared out of the GAM's fifo.
Only FOLLOWING Aperture accesses need to be separated from in flight
PTE updates. PTE Writes may follow tightly behind already in flight
Aperture accesses, so no flushing read is required at the start of
a PTE update sequence.
This issue was reproduced by running
igt/gem_readwrite and
igt/gem_render_copy
simultaneously from different processes, each in a tight loop,
with INTEL_IOMMU enabled.
This patch was originally published as:
drm/i915: Serialize GTT Updates on BXT
[Note: This will cause a performance penalty for some use cases, but
avoiding hangs trumps performance hits. This may need to be worked
around in Mesa to recover the lost performance.]
v2: Move bxt/iommu detection into static function
Remove #ifdef CONFIG_INTEL_IOMMU protection
Make function names more reflective of purpose
Move flushing read into static function
v3: Tidy up for checkpatch.pl
Testcase: igt/gem_concurrent_blit Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: John Harrison <john.C.Harrison@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 0ef34ad6222abfa513117515fec720c33a58f105) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Julien Grall [Wed, 31 May 2017 13:03:57 +0000 (14:03 +0100)]
xen/privcmd: Support correctly 64KB page granularity when mapping memory
Commit 5995a68 "xen/privcmd: Add support for Linux 64KB page granularity" did
not go far enough to support 64KB in mmap_batch_fn.
The variable 'nr' is the number of 4KB chunk to map. However, when Linux
is using 64KB page granularity the array of pages (vma->vm_private_data)
contain one page per 64KB. Fix it by incrementing st->index correctly.
Furthermore, st->va is not correctly incremented as PAGE_SIZE !=
XEN_PAGE_SIZE.
Fixes: 5995a68 ("xen/privcmd: Add support for Linux 64KB page granularity") CC: stable@vger.kernel.org Reported-by: Feng Kan <fkan@apm.com> Signed-off-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
Kai-Heng Feng [Wed, 7 Jun 2017 07:25:43 +0000 (15:25 +0800)]
nvme: relax APST default max latency to 100ms
Christoph Hellwig suggests we should to make APST work out of the box.
Hence relax the the default max latency to make them able to enter
deepest power state on default.
Here are id-ctrl excerpts from two high latency NVMes:
projects / mirror_ubuntu-focal-kernel.git / log