Luiz Capitulino [Wed, 3 Feb 2010 14:41:01 +0000 (12:41 -0200)]
block: BLOCK_IO_ERROR QMP event
This commit introduces the bdrv_mon_event() function, which
should be called by block subsystems (eg. IDE) when a I/O
error occurs, so that an QMP event is emitted.
The following information is currently provided in the event:
- device name
- operation (ie. "read" or "write")
- action taken (eg. "stop")
Sheng Yang [Fri, 29 Jan 2010 02:15:06 +0000 (10:15 +0800)]
qemu-img: Fix qemu-img can't create qcow image based on read-only image
Commit 03cbdac7 "Disable fall-back to read-only when cannot open drive's
file for read-write" result in read-only image can't be used as backed
image in qemu-img.
Cc: Naphtali Sprei <nsprei@redhat.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Scott Tsai [Fri, 29 Jan 2010 19:28:58 +0000 (03:28 +0800)]
doc: Update mingw cross compile instructions
The "Cross compilation for Windows with Linux" section of qemu-doc.texi
still instructs the user to use 'configure --enable-mingw32'
even after the option was removed in Aug 2008:
http://git.savannah.gnu.org/cgit/qemu.git/commit/?id=cd01b4a312248dd4e12c3d389d1a349cea4015d8
This documentation only change updates the instructions to:
* Remove use of '--enable-mingw32' in the configure example
* Correct the 'sdl-config' script name
* Remove references to i386-mingw32msvc.tar.gz which no longer exists in
recent SDL releases
* Document the zlib dependency
Signed-off-by: Scott Tsai <scottt.tw@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Do not ignore error, if open file failed (-serial /dev/tty)
In case, when qemu is executed with option like
-serial /dev/ttyS0, report if there are problems with
opening of devices. At now errors are silently ignoring.
Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Fri, 29 Jan 2010 22:16:50 +0000 (23:16 +0100)]
Documentation: Add build support for documentation in pdf format
Makefile already supported dvi, html and info formats,
but pdf was missing.
pdf is especially convenient for printing and for
documentation reviews. I hope it will help to
improve qemu's documentation.
Make now supports the new target 'pdf' which will
create qemu-doc.pdf and qemu-tech.pdf. It is also
possible to build both files individually.
texi2pdf and texi2dvi are rather noisy, so normally
some less important warnings are suppressed.
When make is called with V=1 (verbose mode),
warnings are not suppressed.
The patch also sorts the documentation targets
alphabetically and wraps a line which was too long.
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Tue, 26 Jan 2010 08:31:46 +0000 (10:31 +0200)]
add qemu_get_clock_ns
Some places use get_clock directly because they want to access the
rt_clock with nanosecond precision. Add a function to do exactly that
instead of using internal interfaces.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Liran Schour [Tue, 26 Jan 2010 08:31:45 +0000 (10:31 +0200)]
Remove unused code
blk_mig_save_bulked_block is never called with sync flag. Remove the sync
flag. Calculate bulk completion during blk_mig_save_bulked_block.
Remove unused constants.
Signed-off-by: Liran Schour <lirans@il.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds notifiers for phys memory changes: a set of callbacks that
vhost can register and update kernel accordingly. Down the road, kvm
code can be switched to use these as well, instead of calling kvm code
directly from exec.c as is done now.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Aurelien Jarno [Tue, 9 Feb 2010 21:54:22 +0000 (22:54 +0100)]
tcg/mips: fix crash in tcg_out_qemu_ld()
The address register is overriden when it corresponds to v0 and the fast
path is taken, which leads to a crash. Fix that by using the a0 register
instead.
Aurelien Jarno [Tue, 2 Feb 2010 21:32:14 +0000 (22:32 +0100)]
target-sh4: MMU: separate execute and read/write permissions
On SH4, the ITLB and UTLB configurations are memory mapped, so loading
ITLB entries from UTLB has to be simulated correctly. For that the QEMU
TLB has to be handle the execute (ITLB) and read/write permissions
(UTLB) seperately.
Aurelien Jarno [Tue, 2 Feb 2010 18:50:51 +0000 (19:50 +0100)]
target-sh4: MMU: optimize UTLB accesses
With the current code, the QEMU TLB is setup to match the read/write
mode of the MMU fault. This means when read access is done, the page
is setup in read-only mode. When the page is later accessed in write
mode, an MMU fault happened, and the page is switch in write-only
mode. This flip-flop causes a lot of calls to the MMU code and slow
down the emulation.
This patch changes the MMU emulation, so that the QEMU TLB is setup
to match the UTLB protection key. This impressively increase the
speed of the emulation.
Aurelien Jarno [Mon, 1 Feb 2010 18:58:46 +0000 (19:58 +0100)]
target-sh4: MMU: fix mem_idx computation
The mem_idx is wrongly computed. As written in target-sh4/cpu.h, mode 0
corresponds to kernel mode (SR_MD = 1), while mode 1 corresponds to user
mode (SR_MD = 0).
Stefan Weil [Wed, 20 Jan 2010 18:43:25 +0000 (19:43 +0100)]
arm host: fix compiler warning
Compilation for arm (native or cross) results in this
warning:
fpu/softfloat-native.c: In function ‘float64_round_to_int’:
fpu/softfloat-native.c:387: error: control reaches end of non-void function
float64_round_to_int uses special assembler code for arm
and has no explicit return value.
As there is no obvious reason why arm should need special
code, all fpu related conditionals were removed.
The remaining code is standard (C99) and compiles for arm,
too.
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There are places, like brcond2, where we know that the destination
of a forward branch will be within 127 bytes.
Add the R_386_PC8 relocation type to support this. Add a flag to
tcg_out_jxx and tcg_out_brcond* to enable it. Set the flag in the
brcond2 label_next branches; pass along the input flag otherwise.
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Loïc Minier [Sun, 31 Jan 2010 11:23:45 +0000 (12:23 +0100)]
Add -static earlier to LDFLAGS for compile_prog()
Add -static to LDFLAGS earlier as to run the compile_prog() tests with
this flags, this will avoid turning on features for which a shared
library is available but not a static one.
Loïc Minier [Sun, 31 Jan 2010 11:22:52 +0000 (12:22 +0100)]
Fix missing symbols in .rel/.rela.plt sections
Fix .rel.plt sections in the output to not only include .rel.plt
sections from the input but also the .rel.iplt sections and to define
the hidden symbols __rel_iplt_start and __rel_iplt_end around
.rel.iplt as otherwise we get undefined references to these when
linking statically to a multilib libc.a. This fixes the static build
under i386.
Apply similar logic to rela.plt/.iplt and __rela_iplt/_plt_start/_end to
fix the static build under amd64.
Aurelien Jarno [Sat, 6 Feb 2010 20:22:19 +0000 (21:22 +0100)]
configure: fix compilation on hosts without -fstack-protector-all
Commit a0f291fc101a7ab3e40850a329da2cc2f2cd1f2d has enabled
-fstack-protector-all on all targets, as the configure test is bogus.
GCC only emits a warning and not an error if this option is not
supported, so the configure scripts doesn't detect the problem.
This patch changes the configure script to try the various flags
with -Werror in addition to catch the possible warnings.
Riku Voipio [Mon, 25 Jan 2010 13:17:32 +0000 (15:17 +0200)]
target-arm: refactor cp15.c13 register access
Access the cp15.c13 TLS registers directly with TCG ops instead of with
a slow helper. If the the cp15 read/write was not TLS register access,
fall back to the cp15 helper.
This makes accessing __thread variables in linux-user when apps are compiled
with -mtp=cp15 possible. legal cp15 register to acces from linux-user are
already checked in cp15_user_ok.
While at it, make the cp15.c13 Thread ID registers available only on
ARMv6K and newer.
Riku Voipio [Mon, 25 Jan 2010 12:30:49 +0000 (14:30 +0200)]
linux-user: remove signal handler before calling abort()
Qemu may hang in host_signal_handler after qemu has done a
seppuku with cpu_abort(). But at this stage we are not really
interested in target process coredump anymore, so unregister
host_signal_handler to die grafefully.
Aurelien Jarno [Sat, 6 Feb 2010 15:59:11 +0000 (16:59 +0100)]
target-ppc: change DCR helpers to target_long arguments
The recent transition to always have the DCR helper functions take 32 bit
values broke the PPC64 target, as target_long became 64 bits there.
This patch changes DCR helpers to target_long arguments, and cast the values
to 32 bit when needed.
Fixes PPC64 build with --enable-debug-tcg
Based on a patch from Alexander Graf <agraf@suse.de> Reported-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The internal opcodes brcond2, add2, sub2, mulu2 were undocumented.
Place these in a new section that clearly indicates that they are
not to be emitted by translators.
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Christian Krause [Sun, 24 Jan 2010 16:34:52 +0000 (17:34 +0100)]
usb-linux: increase buffer for USB control requests
The WLAN USB stick ZyXEL NWD271N (0586:3417) uses very large
usb control transfers of more than 2048 bytes which won't fit
into the buffer of the ctrl_struct. This results in an error message
"husb: ctrl buffer too small" and a non-working device.
Increasing the buffer size to 8192 seems to be a safe choice.
Signed-off-by: Christian Krause <chkr@plauener.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Blue Swirl [Sat, 6 Feb 2010 09:20:13 +0000 (09:20 +0000)]
PCI: fix multiple bridge problems
When several PCI bridges were in use, monitor command "info pci" would
enter into infinite loop. Buses behind the bridge were not discoverable
because secondary and subordinate bus numbers were not used properly.
Other buses were not found because bus search terminated on first miss.
Riku Voipio [Mon, 25 Jan 2010 13:17:32 +0000 (15:17 +0200)]
target-arm: refactor cp15.c13 register access
Access the cp15.c13 TLS registers directly with TCG ops instead of with
a slow helper. If the the cp15 read/write was not TLS register access,
fall back to the cp15 helper.
This makes accessing __thread variables in linux-user when apps are compiled
with -mtp=cp15 possible. legal cp15 register to acces from linux-user are
already checked in cp15_user_ok.
While at it, make the cp15.c13 Thread ID registers available only on
ARMv6K and newer.
Riku Voipio [Mon, 25 Jan 2010 12:30:49 +0000 (14:30 +0200)]
linux-user: remove signal handler before calling abort()
Qemu may hang in host_signal_handler after qemu has done a
seppuku with cpu_abort(). But at this stage we are not really
interested in target process coredump anymore, so unregister
host_signal_handler to die grafefully.
Jan Kiszka [Wed, 3 Feb 2010 20:17:05 +0000 (21:17 +0100)]
KVM: Move and rename regs_modified
Touching the user space representation of KVM's VCPU state is -
naturally - a per-VCPU thing. So move the dirty flag into KVM_CPU_COMMON
and rename it at this chance to reflect its true meaning.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Jan Kiszka [Wed, 3 Feb 2010 20:16:41 +0000 (21:16 +0100)]
KVM: Make vmport KVM-compatible
The vmport "device" accesses the VCPU registers, so it requires proper
cpu_synchronize_state. Add it to vmport_ioport_read, which also
synchronizes vmport_ioport_write.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Jan Kiszka [Thu, 28 Jan 2010 08:30:51 +0000 (09:30 +0100)]
KVM: Request setting of nmi_pending and sipi_vector
The final version of VCPU events in 2.6.33 will allow to skip
nmi_pending and sipi_vector on KVM_SET_VCPU_EVENTS. For now let's write
them unconditionally, which is unproblematic for upstream due to missing
SMP support. Future version which enable SMP will write them only on
reset.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Sheng Yang [Tue, 26 Jan 2010 11:21:16 +0000 (19:21 +0800)]
kvm: Flush coalesced MMIO buffer periodly
The default action of coalesced MMIO is, cache the writing in buffer, until:
1. The buffer is full.
2. Or the exit to QEmu due to other reasons.
But this would result in a very late writing in some condition.
1. The each time write to MMIO content is small.
2. The writing interval is big.
3. No need for input or accessing other devices frequently.
This issue was observed in a experimental embbed system. The test image
simply print "test" every 1 seconds. The output in QEmu meets expectation,
but the output in KVM is delayed for seconds.
Per Avi's suggestion, I hooked flushing coalesced MMIO buffer in VGA update
handler. By this way, We don't need vcpu explicit exit to QEmu to
handle this issue.
Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Option "-device DRIVER,?" and monitor command "device_add DRIVER,?"
print the supported properties instead of creating a device. The
former also terminates the program.
This is commit 2ba6edf0 (just reverted) done right.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Help was shoehorned into device creation, qdev_device_add(). Since
help doesn't create a device, it returns NULL, which looks to callers
just like failed device creation. Monitor handler do_device_add()
doesn't care, but main() exits unsuccessfully.
Move help out of device creation, into new qdev_device_help().
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
projects / qemu.git / log