Thomas Falcon [Wed, 29 Jul 2020 21:36:32 +0000 (16:36 -0500)]
ibmvnic: Fix IRQ mapping disposal in error path
RX queue IRQ mappings are disposed in both the TX IRQ and RX IRQ
error paths. Fix this and dispose of TX IRQ mappings correctly in
case of an error.
Fixes: ea22d51a7831 ("ibmvnic: simplify and improve driver probe function") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 29 Jul 2020 19:16:21 +0000 (12:16 -0700)]
Merge branch 'mlxsw-fixes'
Ido Schimmel says:
====================
mlxsw fixes
This patch set contains various fixes for mlxsw.
Patches #1-#2 fix two trap related issues introduced in previous cycle.
Patches #3-#5 fix rare use-after-frees discovered by syzkaller. After
over a week of fuzzing with the fixes, the bugs did not reproduce.
Patch #6 from Amit fixes an issue in the ethtool selftest that was
recently discovered after running the test on a new platform that
supports only 1Gbps and 10Gbps speeds.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Wed, 29 Jul 2020 09:26:48 +0000 (12:26 +0300)]
selftests: ethtool: Fix test when only two speeds are supported
The test case check_highest_speed_is_chosen() configures $h1 to
advertise a subset of its supported speeds and checks that $h2 chooses
the highest speed from the subset.
To find the common advertised speeds between $h1 and $h2,
common_speeds_get() is called.
Currently, the first speed returned from common_speeds_get() is removed
claiming "h1 does not advertise this speed". The claim is wrong because
the function is called after $h1 already advertised a subset of speeds.
In case $h1 supports only two speeds, it will advertise a single speed
which will be later removed because of previously mentioned bug. This
results in the test needlessly failing. When more than two speeds are
supported this is not an issue because the first advertised speed
is the lowest one.
Fix this by not removing any speed from the list of commonly advertised
speeds.
Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test") Reported-by: Danielle Ratson <danieller@mellanox.com> Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw: spectrum_router: Fix use-after-free in router init / de-init
Several notifiers are registered as part of router initialization.
Since some of these notifiers are registered before the end of the
initialization, it is possible for them to access uninitialized or freed
memory when processing notifications [1].
Additionally, some of these notifiers queue work items on a workqueue.
If these work items are executed after the router was de-initialized,
they will access freed memory.
Fix both problems by moving the registration of the notifiers to the end
of the router initialization and flush the work queue after they are
unregistered.
[1]
BUG: KASAN: use-after-free in __mutex_lock_common kernel/locking/mutex.c:938 [inline]
BUG: KASAN: use-after-free in __mutex_lock+0xeea/0x1340 kernel/locking/mutex.c:1103
Read of size 8 at addr ffff888038c3a6e0 by task kworker/u4:1/61
Fixes: 965fa8e600d2 ("mlxsw: spectrum_router: Make RIF deletion more robust") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw: core: Free EMAD transactions using kfree_rcu()
The lifetime of EMAD transactions (i.e., 'struct mlxsw_reg_trans') is
managed using RCU. They are freed using kfree_rcu() once the transaction
ends.
However, in case the transaction failed it is freed immediately after being
removed from the active transactions list. This is problematic because it is
still possible for a different CPU to dereference the transaction from an RCU
read-side critical section while traversing the active transaction list in
mlxsw_emad_rx_listener_func(). In which case, a use-after-free is triggered
[1].
Fix this by freeing the transaction after a grace period by calling
kfree_rcu().
[1]
BUG: KASAN: use-after-free in mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671
Read of size 8 at addr ffff88800b7964e8 by task syz-executor.2/2881
Memory state around the buggy address: ffff88800b796380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800b796400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88800b796480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff88800b796500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800b796580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: caf7297e7ab5 ("mlxsw: core: Introduce support for asynchronous EMAD register access") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw: core: Increase scope of RCU read-side critical section
The lifetime of the Rx listener item ('rxl_item') is managed using RCU,
but is dereferenced outside of RCU read-side critical section, which can
lead to a use-after-free.
Fix this by increasing the scope of the RCU read-side critical section.
Fixes: 93c1edb27f9e ("mlxsw: Introduce Mellanox switch driver core") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw: spectrum: Use different trap group for externally routed packets
Cited commit mistakenly removed the trap group for externally routed
packets (e.g., via the management interface) and grouped locally routed
and externally routed packet traps under the same group, thereby
subjecting them to the same policer.
This can result in problems, for example, when FRR is restarted and
suddenly all transient traffic is trapped to the CPU because of a
default route through the management interface. Locally routed packets
required to re-establish a BGP connection will never reach the CPU and
the routing tables will not be re-populated.
Fix this by using a different trap group for externally routed packets.
Fixes: 8110668ecd9a ("mlxsw: spectrum_trap: Register layer 3 control traps") Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cited commit added the ability to program link-local prefix routes to
the ASIC so that relevant packets are routed and trapped correctly.
However, host routes were not included in the change and thus not
programmed to the ASIC. This can result in packets being trapped via an
external route trap instead of a local route trap as in IPv4.
Fix this by programming all the link-local routes to the ASIC.
Fixes: 10d3757fcb07 ("mlxsw: spectrum_router: Allow programming link-local prefix routes") Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
fib_trie_unmerge() is called with RTNL held, but not from an RCU
read-side critical section. This leads to the following warning [1] when
the FIB alias list in a leaf is traversed with
hlist_for_each_entry_rcu().
Since the function is always called with RTNL held and since
modification of the list is protected by RTNL, simply use
hlist_for_each_entry() and silence the warning.
[1]
WARNING: suspicious RCU usage 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted
-----------------------------
net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/164:
#0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0
The commit cited below removed the RCU read-side critical section from
rtnl_fdb_dump() which means that the ndo_fdb_dump() callback is invoked
without RCU protection.
This results in the following warning [1] in the VXLAN driver, which
relied on the callback being invoked from an RCU read-side critical
section.
Fix this by calling rcu_read_lock() in the VXLAN driver, as already done
in the bridge driver.
[1]
WARNING: suspicious RCU usage 5.8.0-rc4-custom-01521-g481007553ce6 #29 Not tainted
-----------------------------
drivers/net/vxlan.c:1379 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by bridge/166:
#0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xea/0x1090
Fixes: 5e6d24358799 ("bridge: netlink dump interface at par with brctl") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Varghese [Tue, 28 Jul 2020 17:05:52 +0000 (22:35 +0530)]
Documentation: bareudp: Corrected description of bareudp module.
Removed redundant words.
Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bareudp: forbid mixing IP and MPLS in multiproto mode
In multiproto mode, bareudp_xmit() accepts sending multicast MPLS and
IPv6 packets regardless of the bareudp ethertype. In practice, this
let an IP tunnel send multicast MPLS packets, or an MPLS tunnel send
IPv6 packets.
We need to restrict the test further, so that the multiproto mode only
enables
* IPv6 for IPv4 tunnels,
* or multicast MPLS for unicast MPLS tunnels.
To improve clarity, the protocol validation is moved to its own
function, where each logical test has its own condition.
v2: s/ntohs/htons/
Fixes: 4b5f67232d95 ("net: Special handling for IP & MPLS.") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xiyu Yang [Sat, 25 Jul 2020 08:02:18 +0000 (16:02 +0800)]
ipv6: Fix nexthop refcnt leak when creating ipv6 route info
ip6_route_info_create() invokes nexthop_get(), which increases the
refcount of the "nh".
When ip6_route_info_create() returns, local variable "nh" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
ip6_route_info_create(). When nexthops can not be used with source
routing, the function forgets to decrease the refcnt increased by
nexthop_get(), causing a refcnt leak.
Fix this issue by pulling up the error source routing handling when
nexthops can not be used with source routing.
Fixes: f88d8ea67fbd ("ipv6: Plumb support for nexthop object in a fib6_info") Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Fix bugs in Octeontx2 netdev driver
There are problems in the existing Octeontx2
netdev drivers like missing cancel_work for the
reset task, missing lock in reset task and
missing unergister_netdev in driver remove.
This patch set fixes the above problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Added unregister_netdev in the driver remove
function. Generally unregister_netdev is called
after disabling all the device interrupts but here
it is called before disabling device mailbox
interrupts. The reason behind this is VF needs
mailbox interrupt to communicate with its PF to
clean up its resources during otx2_stop.
otx2_stop disables packet I/O and queue interrupts
first and by using mailbox interrupt communicates
to PF to free VF resources. Hence this patch
calls unregister_device just before
disabling mailbox interrupts.
Fixes: 3184fb5ba96e ("octeontx2-vf: Virtual function driver support") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
During driver exit cancel the queued
reset_task work in VF driver.
Fixes: 3184fb5ba96e ("octeontx2-vf: Virtual function driver support") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Two bugs exist in the code related to reset_task
in PF driver one is the missing protection
against network stack ndo_open and ndo_close.
Other one is the missing cancel_work.
This patch fixes those problems.
Fixes: 4ff7d1488a84 ("octeontx2-pf: Error handling support") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This is a very similar problem to what had been fixed in:
commit 0d98ba8d70b0 ("scsi: hpsa: disable device during shutdown")
to address https://bugzilla.kernel.org/show_bug.cgi?id=199779.
Fixes: 2ba5fbd62b25 ("net/mlx4_core: Handle AER flow properly") Reported-by: Jake Lawrence <lawja@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
rhashtable: Fix unprotected RCU dereference in __rht_ptr
This patch series fixes an unprotected dereference in __rht_ptr.
The first patch is a minimal fix that does not use the correct
RCU markings but is suitable for backport, and the second patch
cleans up the RCU markings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Fri, 24 Jul 2020 10:12:53 +0000 (20:12 +1000)]
rhashtable: Fix unprotected RCU dereference in __rht_ptr
The rcu_dereference call in rht_ptr_rcu is completely bogus because
we've already dereferenced the value in __rht_ptr and operated on it.
This causes potential double readings which could be fatal. The RCU
dereference must occur prior to the comparison in __rht_ptr.
This patch changes the order of RCU dereference so that it is done
first and the result is then fed to __rht_ptr. The RCU marking
changes have been minimised using casts which will be removed in
a follow-up patch.
Fixes: ba6306e3f648 ("rhashtable: Remove RCU marking from...") Reported-by: "Gong, Sishuai" <sishuai@purdue.edu> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 28 Jul 2020 23:55:13 +0000 (16:55 -0700)]
Merge tag 'mlx5-fixes-2020-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes-2020-07-28
This series introduces some fixes to mlx5 driver.
v1->v2:
- Drop the "Hold reference on mirred devices" patch, until Or's
comments are addressed.
- Imporve "Modify uplink state" patch commit message per Or's request.
Please pull and let me know if there is any problem.
For -Stable:
For -stable v4.9
('net/mlx5e: Fix error path of device attach')
For -stable v4.15
('net/mlx5: Verify Hardware supports requested ptp function on a given
pin')
For -stable v5.3
('net/mlx5e: Modify uplink state on interface up/down')
For -stable v5.4
('net/mlx5e: Fix kernel crash when setting vf VLANID on a VF dev')
('net/mlx5: E-switch, Destroy TSAR when fail to enable the mode')
For -stable v5.5
('net/mlx5: E-switch, Destroy TSAR after reload interface')
For -stable v5.7
('net/mlx5: Fix a bug of using ptp channel index as pin index')
====================
Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: lan78xx: fix NULL deref and memory leak
The first two patches fix a NULL-pointer dereference at probe that can
be triggered by a malicious device and a small transfer-buffer memory
leak, respectively.
For another subsystem I would have marked them:
Cc: stable@vger.kernel.org # 4.3
The third one replaces the driver's current broken endpoint lookup
helper, which could end up accepting incomplete interfaces and whose
results weren't even useeren
Johan
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Tue, 28 Jul 2020 12:10:31 +0000 (14:10 +0200)]
net: lan78xx: replace bogus endpoint lookup
Drop the bogus endpoint-lookup helper which could end up accepting
interfaces based on endpoints belonging to unrelated altsettings.
Note that the returned bulk pipes and interrupt endpoint descriptor
were never actually used. Instead the bulk-endpoint numbers are
hardcoded to 1 and 2 (matching the specification), while the interrupt-
endpoint descriptor was assumed to be the third descriptor created by
USB core.
Try to bring some order to this by dropping the bogus lookup helper and
adding the missing endpoint sanity checks while keeping the interrupt-
descriptor assumption for now.
Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Tue, 28 Jul 2020 12:10:30 +0000 (14:10 +0200)]
net: lan78xx: fix transfer-buffer memory leak
The interrupt URB transfer-buffer was never freed on disconnect or after
probe errors.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Tue, 28 Jul 2020 12:10:29 +0000 (14:10 +0200)]
net: lan78xx: add missing endpoint sanity check
Add the missing endpoint sanity check to prevent a NULL-pointer
dereference should a malicious device lack the expected endpoints.
Note that the driver has a broken endpoint-lookup helper,
lan78xx_get_endpoints(), which can end up accepting interfaces in an
altsetting without endpoints as long as *some* altsetting has a bulk-in
and a bulk-out endpoint.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5e: Fix kernel crash when setting vf VLANID on a VF dev
After the cited commit, function 'mlx5_eswitch_set_vport_vlan' started
to acquire esw->state_lock.
However, esw is not defined for VF devices, hence attempting to set vf
VLANID on a VF dev will cause a kernel panic.
Fix it by moving up the (redundant) esw validation from function
'__mlx5_eswitch_set_vport_vlan' since the rest of the callers now have
and use a valid esw.
For example with vf device eth4:
# ip link set dev eth4 vf 0 vlan 0
Ron Diskin [Sun, 5 Apr 2020 10:58:40 +0000 (13:58 +0300)]
net/mlx5e: Modify uplink state on interface up/down
When setting the PF interface up/down, notify the firmware to update
uplink state via MODIFY_VPORT_STATE, when E-Switch is enabled.
This behavior will prevent sending traffic out on uplink port when PF is
down, such as sending traffic from a VF interface which is still up.
Currently when calling mlx5e_open/close(), the driver only sends PAOS
command to notify the firmware to set the physical port state to
up/down, however, it is not sufficient. When VF is in "auto" state, it
follows the uplink state, which was not updated on mlx5e_open/close()
before this patch.
When switchdev mode is enabled and uplink representor is first enabled,
set the uplink port state value back to its FW default "AUTO".
Fixes: 63bfd399de55 ("net/mlx5e: Send PAOS command on interface up/down") Signed-off-by: Ron Diskin <rondi@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Eran Ben Elisha [Mon, 20 Jul 2020 15:34:37 +0000 (18:34 +0300)]
net/mlx5: Query PPS pin operational status before registering it
In a special configuration, a ConnectX6-Dx pin pps-out might be activated
when driver is loaded. Fix the driver to always read the operational pin
mode when registering it, and advertise it accordingly.
Fixes: ee7f12205abc ("net/mlx5e: Implement 1PPS support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Raed Salem [Thu, 9 Jul 2020 12:51:53 +0000 (15:51 +0300)]
net/mlx5e: Fix slab-out-of-bounds in mlx5e_rep_is_lag_netdev
mlx5e_rep_is_lag_netdev is used as first check as part of netdev events
handler for bond device of non-uplink representors, this handler can get
any netdevice under the same network namespace of mlx5e netdevice. Current
code treats the netdev as mlx5e netdev and only later on verifies this,
hence causes the following Kasan trace:
[15402.744990] ==================================================================
[15402.746942] BUG: KASAN: slab-out-of-bounds in mlx5e_rep_is_lag_netdev+0xcb/0xf0 [mlx5_core]
[15402.749009] Read of size 8 at addr ffff880391f3f6b0 by task ovs-vswitchd/5347
[15402.752065] CPU: 7 PID: 5347 Comm: ovs-vswitchd Kdump: loaded Tainted: G B O --------- -t - 4.18.0-g3dcc204d291d-dirty #1
[15402.755349] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[15402.757600] Call Trace:
[15402.758968] dump_stack+0x71/0xab
[15402.760427] print_address_description+0x6a/0x270
[15402.761969] kasan_report+0x179/0x2d0
[15402.763445] ? mlx5e_rep_is_lag_netdev+0xcb/0xf0 [mlx5_core]
[15402.765121] mlx5e_rep_is_lag_netdev+0xcb/0xf0 [mlx5_core]
[15402.766782] mlx5e_rep_esw_bond_netevent+0x129/0x620 [mlx5_core]
Fix by deferring the violating access to be post the netdev verify check.
Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule") Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vu Pham <vuhuong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Eran Ben Elisha [Wed, 8 Jul 2020 15:53:19 +0000 (18:53 +0300)]
net/mlx5: Fix a bug of using ptp channel index as pin index
On PTP mlx5_ptp_enable(on=0) flow, driver mistakenly used channel index
as pin index.
After ptp patch marked in fixes tag was introduced, driver can freely
call ptp_find_pin() as part of the .enable() callback.
Fix driver mlx5_ptp_enable(on=0) flow to always use ptp_find_pin(). With
that, Driver will use the correct pin index in mlx5_ptp_enable(on=0) flow.
In addition, when initializing the pins, always set channel to zero. As
all pins can be attached to all channels, let ptp_set_pinfunc() to move
them between the channels.
For stable branches, this fix to be applied only on kernels that includes
both patches in fixes tag. Otherwise, mlx5_ptp_enable(on=0) will be stuck
on pincfg_mux.
Fixes: 62582a7ee783 ("ptp: Avoid deadlocks in the programmable pin code.") Fixes: ee7f12205abc ("net/mlx5e: Implement 1PPS support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
net/mlx5e: Fix missing cleanup of ethtool steering during rep rx cleanup
The cited commit add initialization of ethtool steering during
representor rx initializations without cleaning it up in representor
rx cleanup, this may cause for stale ethtool flows to remain after
moving back from switchdev mode to legacy mode.
Fixed by calling ethtool steering cleanup during rep rx cleanup.
Aya Levin [Wed, 1 Jul 2020 09:21:53 +0000 (12:21 +0300)]
net/mlx5e: Fix error path of device attach
On failure to attach the netdev, fix the rollback by re-setting the
device's state back to MLX5E_STATE_DESTROYING.
Failing to attach doesn't stop statistics polling via .ndo_get_stats64.
In this case, although the device is not attached, it falsely continues
to query the firmware for counters. Setting the device's state back to
MLX5E_STATE_DESTROYING prevents the firmware counters query.
find_next_chained_ft(prio) returns the first flow table in the next
priority. If prio is a parent of a flow table then it returns the first
flow table in the next priority in the same namespace, else if prio
is parent of namespace, then it should return the first flow table
in the next namespace. Currently if the user requests to forward to
next namespace, the code calls to find_next_chained_ft with the prio
of the next namespace and not the prio of the namesapce itself.
Fixes: 9254f8ed15b6 ("net/mlx5: Add support in forward to namespace") Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Parav Pandit [Sat, 27 Jun 2020 10:11:56 +0000 (13:11 +0300)]
net/mlx5: E-switch, Destroy TSAR after reload interface
When eswitch offloads is enabled, TSAR is created before reloading
the interfaces.
However when eswitch offloads mode is disabled, TSAR is disabled before
reloading the interfaces.
To keep the eswitch enable/disable sequence as mirror, destroy TSAR
after reloading the interfaces.
David S. Miller [Tue, 28 Jul 2020 19:54:48 +0000 (12:54 -0700)]
Merge branch 'hns3-fixes'
Huazhong Tan says:
====================
net: hns3: fixes for -net
There are some bugfixes for the HNS3 ethernet driver. patch#1 fixes
a desc filling bug, patch#2 fixes a false TX timeout issue, and
patch#3~#5 fixes some bugs related to VLAN and FD.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When device is resetting or reset failed, firmware is unable to
handle mailbox. VLAN should not be configured in this case.
Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed") Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: hns3: fix aRFS FD rules leftover after add a user FD rule
When user had created a FD rule, all the aRFS rules should be clear up.
HNS3 process flow as below:
1.get spin lock of fd_ruls_list
2.clear up all aRFS rules
3.release lock
4.get spin lock of fd_ruls_list
5.creat a rules
6.release lock;
There is a short period of time between step 3 and step 4, which would
creatting some new aRFS FD rules if driver was receiving packet.
So refactor the fd_rule_lock to fix it.
Fixes: 441228875706 ("net: hns3: refine the flow director handle") Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: hns3: add reset check for VF updating port based VLAN
Currently hclgevf_update_port_base_vlan_info() may be called when
VF is resetting, which may cause hns3_nic_net_open() being called
twice unexpectedly.
So fix it by adding a reset check for it, and extend critical
region for rntl_lock in hclgevf_update_port_base_vlan_info().
Fixes: 92f11ea177cd ("net: hns3: fix set port based VLAN issue for VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Tue, 28 Jul 2020 02:16:49 +0000 (10:16 +0800)]
net: hns3: fix a TX timeout issue
When the queue depth and queue parameters are modified, there is
a low probability that TX timeout occurs. The two operations cause
the link to be down or up when the watchdog is still working. All
queues are stopped when the link is down. After the carrier is on,
all queues are woken up. If the watchdog detects the link between
the carrier on and wakeup queues, a false TX timeout occurs.
So fix this issue by modifying the sequence of carrier on and queue
wakeup, which is symmetrical to the link down action.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Tue, 28 Jul 2020 02:16:48 +0000 (10:16 +0800)]
net: hns3: fix desc filling bug when skb is expanded or lineared
The linear and frag data part may be changed when the skb is expanded
or lineared in skb_cow_head() or skb_checksum_help(), which is called
by hns3_fill_skb_desc(), so the linear len return by skb_headlen()
before the calling of hns3_fill_skb_desc() is unreliable.
Move hns3_fill_skb_desc() before the calling of skb_headlen() to fix
this bug.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Al Viro [Mon, 27 Jul 2020 18:22:20 +0000 (19:22 +0100)]
fix a braino in cmsghdr_from_user_compat_to_kern()
commit 547ce4cfb34c ("switch cmsghdr_from_user_compat_to_kern() to
copy_from_user()") missed one of the places where ucmlen should've been
replaced with cmsg.cmsg_len, now that we are fetching the entire struct
rather than doing it field-by-field.
As the result, compat sendmsg() with several different-sized cmsg
attached started to fail with EINVAL. Trivial to fix, fortunately.
Fixes: 547ce4cfb34c ("switch cmsghdr_from_user_compat_to_kern() to copy_from_user()") Reported-by: Nick Bowler <nbowler@draconx.ca> Tested-by: Nick Bowler <nbowler@draconx.ca> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
selftests/net: Fix clang warnings on powerpc
This is essentially a v2 of
http://patchwork.ozlabs.org/project/netdev/patch/20200724181757.2331172-1-tannerlove.kernel@gmail.com/,
but it has been split up in order to have only one "Fixes" tag per
patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tanner Love [Mon, 27 Jul 2020 16:25:31 +0000 (12:25 -0400)]
selftests/net: tcp_mmap: fix clang warning for target arch PowerPC
When size_t maps to unsigned int (e.g. on 32-bit powerpc), then the
comparison with 1<<35 is always true. Clang 9 threw:
warning: result of comparison of constant 34359738368 with \
expression of type 'size_t' (aka 'unsigned int') is always true \
[-Wtautological-constant-out-of-range-compare]
while (total < FILE_SZ) {
Tested: make -C tools/testing/selftests TARGETS="net" run_tests
Fixes: 192dc405f308 ("selftests: net: add tcp_mmap program") Signed-off-by: Tanner Love <tannerlove@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tanner Love [Mon, 27 Jul 2020 16:25:30 +0000 (12:25 -0400)]
selftests/net: so_txtime: fix clang issues for target arch PowerPC
On powerpcle, int64_t maps to long long. Clang 9 threw:
warning: absolute value function 'labs' given an argument of type \
'long long' but has parameter of type 'long' which may cause \
truncation of value [-Wabsolute-value]
if (labs(tstop - texpect) > cfg_variance_us)
Tested: make -C tools/testing/selftests TARGETS="net" run_tests
Fixes: af5136f95045 ("selftests/net: SO_TXTIME with ETF and FQ") Signed-off-by: Tanner Love <tannerlove@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tanner Love [Mon, 27 Jul 2020 16:25:29 +0000 (12:25 -0400)]
selftests/net: psock_fanout: fix clang issues for target arch PowerPC
Clang 9 threw:
warning: format specifies type 'unsigned short' but the argument has \
type 'int' [-Wformat]
typeflags, PORT_BASE, PORT_BASE + port_off);
Tested: make -C tools/testing/selftests TARGETS="net" run_tests
Fixes: 77f65ebdca50 ("packet: packet fanout rollover during socket overload") Signed-off-by: Tanner Love <tannerlove@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tanner Love [Mon, 27 Jul 2020 16:25:28 +0000 (12:25 -0400)]
selftests/net: rxtimestamp: fix clang issues for target arch PowerPC
The signedness of char is implementation-dependent. Some systems
(including PowerPC and ARM) use unsigned char. Clang 9 threw:
warning: result of comparison of constant -1 with expression of type \
'char' is always true [-Wtautological-constant-out-of-range-compare]
&arg_index)) != -1) {
Tested: make -C tools/testing/selftests TARGETS="net" run_tests
Fixes: 16e781224198 ("selftests/net: Add a test to validate behavior of rx timestamps") Signed-off-by: Tanner Love <tannerlove@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The next hw timestamp should be snapshoot to the read registers
only once the current timestamp has been read.
If none of the pending skbs matches the current HW timestamp
just gracefully flush the available timestamp by reading it.
Signed-off-by: laurent brando <laurent.brando@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Unblocking sockets used for outgoing connections were not containing
inet info about the initial connection due to a typo there: the value of
"err" variable is negative in the kernelspace.
This fixes the creation of additional subflows where the remote port has
to be reused if the other host didn't announce another one. This also
fixes inet_diag showing blank info about MPTCP sockets from unblocking
sockets doing a connect().
Fixes: 41be81a8d3d0 ("mptcp: fix unblocking connect()") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'riscv-for-linus-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into master
Pull RISC-V fixes from Palmer Dabbelt:
"A few more fixes this week:
- A fix to avoid using SBI calls during kasan initialization, as the
SBI calls themselves have not been probed yet.
- Three fixes related to systems with multiple memory regions"
* tag 'riscv-for-linus-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Parse all memory blocks to remove unusable memory
RISC-V: Do not rely on initrd_start/end computed during early dt parsing
RISC-V: Set maximum number of mapped pages correctly
riscv: kasan: use local_tlb_flush_all() to avoid uninitialized __sbi_rfence
Merge tag 'x86-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- Fix a section end page alignment assumption that was causing
crashes
- Fix ORC unwinding on freshly forked tasks which haven't executed
yet and which have empty user task stacks
- Fix the debug.exception-trace=1 sysctl dumping of user stacks,
which was broken by recent maccess changes"
* tag 'x86-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/dumpstack: Dump user space code correctly again
x86/stacktrace: Fix reliable check for empty user task stacks
x86/unwind/orc: Fix ORC for newly forked tasks
x86, vmlinux.lds: Page-align end of ..page_aligned sections
Merge tag 'perf-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull uprobe fix from Ingo Molnar:
"Fix an interaction/regression between uprobes based shared library
tracing & GDB"
* tag 'perf-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression
Merge tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull timer fix from Ingo Molnar:
"Fix a suspend/resume regression (crash) on TI AM3/AM4 SoC's"
* tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4
Merge tag 'sched-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull scheduler fixes from Ingo Molnar:
"Fix a race introduced by the recent loadavg race fix, plus add a debug
check for a hard to debug case of bogus wakeup function flags"
* tag 'sched-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Warn if garbage is passed to default_wake_function()
sched: Fix race against ptrace_freeze_trace()
Merge tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull EFI fixes from Ingo Molnar:
"Various EFI fixes:
- Fix the layering violation in the use of the EFI runtime services
availability mask in users of the 'efivars' abstraction
- Revert build fix for GCC v4.8 which is no longer supported
- Clean up some x86 EFI stub details, some of which are borderline
bugs that copy around garbage into padding fields - let's fix these
out of caution.
- Fix build issues while working on RISC-V support
- Avoid --whole-archive when linking the stub on arm64"
* tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Revert "efi/x86: Fix build with gcc 4"
efi/efivars: Expose RT service availability via efivars abstraction
efi/libstub: Move the function prototypes to header file
efi/libstub: Fix gcc error around __umoddi3 for 32 bit builds
efi/libstub/arm64: link stub lib.a conditionally
efi/x86: Only copy upto the end of setup_header
efi/x86: Remove unused variables
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net into master
Pull networking fixes from David Miller:
1) Fix RCU locaking in iwlwifi, from Johannes Berg.
2) mt76 can access uninitialized NAPI struct, from Felix Fietkau.
3) Fix race in updating pause settings in bnxt_en, from Vasundhara
Volam.
4) Propagate error return properly during unbind failures in ax88172a,
from George Kennedy.
5) Fix memleak in adf7242_probe, from Liu Jian.
6) smc_drv_probe() can leak, from Wang Hai.
7) Don't muck with the carrier state if register_netdevice() fails in
the bonding driver, from Taehee Yoo.
8) Fix memleak in dpaa_eth_probe, from Liu Jian.
9) Need to check skb_put_padto() return value in hsr_fill_tag(), from
Murali Karicheri.
10) Don't lose ionic RSS hash settings across FW update, from Shannon
Nelson.
11) Fix clobbered SKB control block in act_ct, from Wen Xu.
12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang.
13) IS_UDPLITE cleanup a long time ago, incorrectly handled
transformations involving UDPLITE_RECV_CC. From Miaohe Lin.
14) Unbalanced locking in netdevsim, from Taehee Yoo.
15) Suppress false-positive error messages in qed driver, from Alexander
Lobakin.
16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye.
17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost.
18) Uninitialized value in geneve_changelink(), from Cong Wang.
19) Fix deadlock in xen-netfront, from Andera Righi.
19) flush_backlog() frees skbs with IRQs disabled, so should use
dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov
Kasiviswanathan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
drivers/net/wan: lapb: Corrected the usage of skb_cow
dev: Defer free of skbs in flush_backlog
qrtr: orphan socket in qrtr_release()
xen-netfront: fix potential deadlock in xennet_remove()
flow_offload: Move rhashtable inclusion to the source file
geneve: fix an uninitialized value in geneve_changelink()
bonding: check return value of register_netdevice() in bond_newlink()
tcp: allow at most one TLP probe per flight
AX.25: Prevent integer overflows in connect and sendmsg
cxgb4: add missing release on skb in uld_send()
net: atlantic: fix PTP on AQC10X
AX.25: Prevent out-of-bounds read in ax25_sendmsg()
sctp: shrink stream outq when fails to do addstream reconf
sctp: shrink stream outq only when new outcnt < old outcnt
AX.25: Fix out-of-bounds read in ax25_connect()
enetc: Remove the mdio bus on PF probe bailout
net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload
net: ethernet: ave: Fix error returns in ave_init
drivers/net/wan/x25_asy: Fix to make it work
ipvs: fix the connection sync failed in some cases
...
riscv: Parse all memory blocks to remove unusable memory
Currently, maximum physical memory allowed is equal to -PAGE_OFFSET.
That's why we remove any memory blocks spanning beyond that size. However,
it is done only for memblock containing linux kernel which will not work
if there are multiple memblocks.
Process all memory blocks to figure out how much memory needs to be removed
and remove at the end instead of updating the memblock list in place.
RISC-V: Do not rely on initrd_start/end computed during early dt parsing
Currently, initrd_start/end are computed during early_init_dt_scan
but used during arch_setup. We will get the following panic if initrd is used
and CONFIG_DEBUG_VIRTUAL is turned on.
To avoid the error, initrd_start/end can be computed from phys_initrd_start/size
in setup itself. It also improves the initrd placement by aligning the start
and size with the page size.
Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code") Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Xie He [Fri, 24 Jul 2020 16:33:47 +0000 (09:33 -0700)]
drivers/net/wan: lapb: Corrected the usage of skb_cow
This patch fixed 2 issues with the usage of skb_cow in LAPB drivers
"lapbether" and "hdlc_x25":
1) After skb_cow fails, kfree_skb should be called to drop a reference
to the skb. But in both drivers, kfree_skb is not called.
2) skb_cow should be called before skb_push so that is can ensure the
safety of skb_push. But in "lapbether", it is incorrectly called after
skb_push.
More details about these 2 issues:
1) The behavior of calling kfree_skb on failure is also the behavior of
netif_rx, which is called by this function with "return netif_rx(skb);".
So this function should follow this behavior, too.
2) In "lapbether", skb_cow is called after skb_push. This results in 2
logical issues:
a) skb_push is not protected by skb_cow;
b) An extra headroom of 1 byte is ensured after skb_push. This extra
headroom has no use in this function. It also has no use in the
upper-layer function that this function passes the skb to
(x25_lapb_receive_frame in net/x25/x25_dev.c).
So logically skb_cow should instead be called before skb_push.
Cc: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
IRQs are disabled when freeing skbs in input queue.
Use the IRQ safe variant to free skbs here.
Fixes: 145dd5f9c88f ("net: flush the softnet backlog in process context") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
RISC-V: Set maximum number of mapped pages correctly
Currently, maximum number of mapper pages are set to the pfn calculated
from the memblock size of the memblock containing kernel. This will work
until that memblock spans the entire memory. However, it will be set to
a wrong value if there are multiple memblocks defined in kernel
(e.g. with efi runtime services).
Set the the maximum value to the pfn calculated from dram size.
Merge tag 'pci-v5.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into master
Pull PCI fixes from Bjorn Helgaas:
- Reject invalid IRQ 0 command line argument for virtio_mmio because
IRQ 0 now generates warnings (Bjorn Helgaas)
- Revert "PCI/PM: Assume ports without DLL Link Active train links in
100 ms", which broke nouveau (Bjorn Helgaas)
* tag 'pci-v5.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms"
virtio-mmio: Reject invalid IRQ 0 command line argument
Cong Wang [Fri, 24 Jul 2020 16:45:51 +0000 (09:45 -0700)]
qrtr: orphan socket in qrtr_release()
We have to detach sock from socket in qrtr_release(),
otherwise skb->sk may still reference to this socket
when the skb is released in tun->queue, particularly
sk->sk_wq still points to &sock->wq, which leads to
a UAF.
Reported-and-tested-by: syzbot+6720d64f31c081c2f708@syzkaller.appspotmail.com Fixes: 28fb4e59a47d ("net: qrtr: Expose tunneling endpoint to user space") Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrea Righi [Fri, 24 Jul 2020 08:59:10 +0000 (10:59 +0200)]
xen-netfront: fix potential deadlock in xennet_remove()
There's a potential race in xennet_remove(); this is what the driver is
doing upon unregistering a network device:
1. state = read bus state
2. if state is not "Closed":
3. request to set state to "Closing"
4. wait for state to be set to "Closing"
5. request to set state to "Closed"
6. wait for state to be set to "Closed"
If the state changes to "Closed" immediately after step 1 we are stuck
forever in step 4, because the state will never go back from "Closed" to
"Closing".
Make sure to check also for state == "Closed" in step 4 to prevent the
deadlock.
Also add a 5 sec timeout any time we wait for the bus state to change,
to avoid getting stuck forever in wait_event().
Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Fri, 24 Jul 2020 00:50:22 +0000 (10:50 +1000)]
flow_offload: Move rhashtable inclusion to the source file
I noticed that touching linux/rhashtable.h causes lib/vsprintf.c to
be rebuilt. This dependency came through a bogus inclusion in the
file net/flow_offload.h. This patch moves it to the right place.
This patch also removes a lingering rhashtable inclusion in cls_api
created by the same commit.
Fixes: 4e481908c51b ("flow_offload: move tc indirect block to...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'akpm' into master (patches from Andrew)
Merge misc fixes from Andrew Morton:
"Subsystems affected by this patch series: mm/pagemap, mm/shmem,
mm/hotfixes, mm/memcg, mm/hugetlb, mailmap, squashfs, scripts,
io-mapping, MAINTAINERS, and gdb"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
scripts/gdb: fix lx-symbols 'gdb.error' while loading modules
MAINTAINERS: add KCOV section
io-mapping: indicate mapping failure
scripts/decode_stacktrace: strip basepath from all paths
squashfs: fix length field overlap check in metadata reading
mailmap: add entry for Mike Rapoport
khugepaged: fix null-pointer dereference due to race
mm/hugetlb: avoid hardcoding while checking if cma is enabled
mm: memcg/slab: fix memory leak at non-root kmem_cache destroy
mm/memcg: fix refcount error while moving and swapping
mm/memcontrol: fix OOPS inside mem_cgroup_get_nr_swap_pages()
mm: initialize return of vm_insert_pages
vfs/xattr: mm/shmem: kernfs: release simple xattr entry in a right way
mm/mmap.c: close race between munmap() and expand_upwards()/downwards()
Merge tag 'for-5.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into master
Pull btrfs fixes from David Sterba:
"A few resouce leak fixes from recent patches, all are stable material.
The problems have been observed during testing or have a reproducer"
* tag 'for-5.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix mount failure caused by race with umount
btrfs: fix page leaks after failure to lock page for delalloc
btrfs: qgroup: fix data leak caused by race between writeback and truncate
btrfs: fix double free on ulist after backref resolution failure
Merge tag 'zonefs-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs into master
Pull zonefs fixes from Damien Le Moal:
"Two fixes, the first one to remove compilation warnings and the second
to avoid potentially inefficient allocation of BIOs for direct writes
into sequential zones"
* tag 'zonefs-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: count pages after truncating the iterator
zonefs: Fix compilation warning
Merge tag 'io_uring-5.8-2020-07-24' of git://git.kernel.dk/linux-block into master
Pull io_uring fixes from Jens Axboe:
- Fix discrepancy in how sqe->flags are treated for a few requests,
this makes it consistent (Daniele)
- Ensure that poll driven retry works with double waitqueue poll users
- Fix a missing io_req_init_async() (Pavel)
* tag 'io_uring-5.8-2020-07-24' of git://git.kernel.dk/linux-block:
io_uring: missed req_init_async() for IOSQE_ASYNC
io_uring: always allow drain/link/hardlink/async sqe flags
io_uring: ensure double poll additions work with both request types
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma into master
Pull rdma fixes from Jason Gunthorpe:
"One merge window regression, some corruption bugs in HNS and a few
more syzkaller fixes:
- Two long standing syzkaller races
- Fix incorrect HW configuration in HNS
- Restore accidentally dropped locking in IB CM
- Fix ODP prefetch bug added in the big rework several versions ago"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Prevent prefetch from racing with implicit destruction
RDMA/cm: Protect access to remote_sidr_table
RDMA/core: Fix race in rdma_alloc_commit_uobject()
RDMA/hns: Fix wrong PBL offset when VA is not aligned to PAGE_SIZE
RDMA/hns: Fix wrong assignment of lp_pktn_ini in QPC
RDMA/mlx5: Use xa_lock_irq when access to SRQ table
Merge tag 'for-5.8/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm into master
Pull device mapper fix from Mike Snitzer:
"A stable fix for DM integrity target's integrity recalculation that
gets skipped when resuming a device. This is a fix for a previous
stable@ fix"
* tag 'for-5.8/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: fix integrity recalculation that is improperly skipped
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into master
Pull i2c fixes from Wolfram Sang:
"Again some driver bugfixes and some documentation fixes"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i2c-qcom-geni: Fix DMA transfer race
i2c: rcar: always clear ICSAR to avoid side effects
MAINTAINERS: i2c: at91: handover maintenance to Codrin Ciubotariu
i2c: drop duplicated word in the header file
i2c: cadence: Clear HOLD bit at correct time in Rx path
Revert "i2c: cadence: Fix the hold bit setting"
Merge tag 'drm-fixes-2020-07-24' of git://anongit.freedesktop.org/drm/drm into master
Pull drm fixes from Dave Airlie:
"Quiet fixes, I may have a single regression fix follow up to this for
nouveau, but it might be next week, Ben was testing it a bit more .
Otherwise two amdgpu fixes, one lima and one sun4i:
amdgpu:
- Fix crash when overclocking VegaM
- Fix possible crash when editing dpm levels
sun4i:
- Fix inverted HPD result; fixes an earlier fix
lima:
- fix timeout during reset"
* tag 'drm-fixes-2020-07-24' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: Fix NULL dereference in dpm sysfs handlers
drm/amd/powerplay: fix a crash when overclocking Vega M
drm/lima: fix wait pp reset timeout
drm: sun4i: hdmi: Fix inverted HPD result
scripts/gdb: fix lx-symbols 'gdb.error' while loading modules
Commit ed66f991bb19 ("module: Refactor section attr into bin attribute")
removed the 'name' field from 'struct module_sect_attr' triggering the
following error when invoking lx-symbols:
(gdb) lx-symbols
loading vmlinux
scanning for modules in linux/build
loading @0xffffffffc014f000: linux/build/drivers/net/tun.ko
Python Exception <class 'gdb.error'> There is no member named name.:
Error occurred in Python: There is no member named name.
This patch fixes the issue taking the module name from the 'struct
attribute'.
Fixes: ed66f991bb19 ("module: Refactor section attr into bin attribute") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Kieran Bingham <kbingham@kernel.org> Link: http://lkml.kernel.org/r/20200722102239.313231-1-sgarzare@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: cafaf14a5d8f ("io-mapping: Always create a struct to hold metadata about the io-mapping") Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200721171936.81563-1-michael.j.ruhl@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
scripts/decode_stacktrace: strip basepath from all paths
Currently the basepath is removed only from the beginning of the string.
When the symbol is inlined and there's multiple line outputs of
addr2line, only the first line would have basepath removed.
Change to remove the basepath prefix from all lines.
Fixes: 31013836a71e ("scripts/decode_stacktrace: match basepath using shell prefix operator, not regex") Co-developed-by: Shik Chen <shik@chromium.org> Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by: Shik Chen <shik@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Jiri Slaby <jslaby@suse.cz> Link: http://lkml.kernel.org/r/20200720082709.252805-1-pihsun@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
squashfs: fix length field overlap check in metadata reading
This is a regression introduced by the "migrate from ll_rw_block usage
to BIO" patch.
Squashfs packs structures on byte boundaries, and due to that the length
field (of the metadata block) may not be fully in the current block.
The new code rewrote and introduced a faulty check for that edge case.
Fixes: 93e72b3c612adcaca1 ("squashfs: migrate from ll_rw_block usage to BIO") Reported-by: Bernd Amend <bernd.amend@gmail.com> Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Adrien Schildknecht <adrien+dev@schischi.me> Cc: Guenter Roeck <groeck@chromium.org> Cc: Daniel Rosenberg <drosen@google.com> Link: http://lkml.kernel.org/r/20200717195536.16069-1-phillip@squashfs.org.uk Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
khugepaged: fix null-pointer dereference due to race
khugepaged has to drop mmap lock several times while collapsing a page.
The situation can change while the lock is dropped and we need to
re-validate that the VMA is still in place and the PMD is still subject
for collapse.
But we miss one corner case: while collapsing an anonymous pages the VMA
could be replaced with file VMA. If the file VMA doesn't have any
private pages we get NULL pointer dereference:
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
anon_vma_lock_write include/linux/rmap.h:120 [inline]
collapse_huge_page mm/khugepaged.c:1110 [inline]
khugepaged_scan_pmd mm/khugepaged.c:1349 [inline]
khugepaged_scan_mm_slot mm/khugepaged.c:2110 [inline]
khugepaged_do_scan mm/khugepaged.c:2193 [inline]
khugepaged+0x3bba/0x5a10 mm/khugepaged.c:2238
The fix is to make sure that the VMA is anonymous in
hugepage_vma_revalidate(). The helper is only used for collapsing
anonymous pages.
Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") Reported-by: syzbot+ed318e8b790ca72c5ad0@syzkaller.appspotmail.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Yang Shi <yang.shi@linux.alibaba.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200722121439.44328-1-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Barry Song [Fri, 24 Jul 2020 04:15:30 +0000 (21:15 -0700)]
mm/hugetlb: avoid hardcoding while checking if cma is enabled
hugetlb_cma[0] can be NULL due to various reasons, for example, node0
has no memory. so NULL hugetlb_cma[0] doesn't necessarily mean cma is
not enabled. gigantic pages might have been reserved on other nodes.
This patch fixes possible double reservation and CMA leak.
[akpm@linux-foundation.org: fix CONFIG_CMA=n warning]
[sfr@canb.auug.org.au: better checks before using hugetlb_cma] Link: http://lkml.kernel.org/r/20200721205716.6dbaa56b@canb.auug.org.au Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200710005726.36068-1-song.bao.hua@hisilicon.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Muchun Song [Fri, 24 Jul 2020 04:15:27 +0000 (21:15 -0700)]
mm: memcg/slab: fix memory leak at non-root kmem_cache destroy
If the kmem_cache refcount is greater than one, we should not mark the
root kmem_cache as dying. If we mark the root kmem_cache dying
incorrectly, the non-root kmem_cache can never be destroyed. It
resulted in memory leak when memcg was destroyed. We can use the
following steps to reproduce.
1) Use kmem_cache_create() to create a new kmem_cache named A.
2) Coincidentally, the kmem_cache A is an alias for kmem_cache B,
so the refcount of B is just increased.
3) Use kmem_cache_destroy() to destroy the kmem_cache A, just
decrease the B's refcount but mark the B as dying.
4) Create a new memory cgroup and alloc memory from the kmem_cache
B. It leads to create a non-root kmem_cache for allocating memory.
5) When destroy the memory cgroup created in the step 4), the
non-root kmem_cache can never be destroyed.
If we repeat steps 4) and 5), this will cause a lot of memory leak. So
only when refcount reach zero, we mark the root kmem_cache as dying.
Fixes: 92ee383f6daa ("mm: fix race between kmem_cache destroy, create and deactivate") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200716165103.83462-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/memcg: fix refcount error while moving and swapping
It was hard to keep a test running, moving tasks between memcgs with
move_charge_at_immigrate, while swapping: mem_cgroup_id_get_many()'s
refcount is discovered to be 0 (supposedly impossible), so it is then
forced to REFCOUNT_SATURATED, and after thousands of warnings in quick
succession, the test is at last put out of misery by being OOM killed.
This is because of the way moved_swap accounting was saved up until the
task move gets completed in __mem_cgroup_clear_mc(), deferred from when
mem_cgroup_move_swap_account() actually exchanged old and new ids.
Concurrent activity can free up swap quicker than the task is scanned,
bringing id refcount down 0 (which should only be possible when
offlining).
Just skip that optimization: do that part of the accounting immediately.
Fixes: 615d66c37c75 ("mm: memcontrol: fix memcg id ref counter on swap charge move") Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2007071431050.4726@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prabhakar reported an OOPS inside mem_cgroup_get_nr_swap_pages()
function in a corner case seen on some arm64 boards when kdump kernel
runs with "cgroup_disable=memory" passed to the kdump kernel via
bootargs.
The root-cause behind the same is that currently mem_cgroup_swap_init()
function is implemented as a subsys_initcall() call instead of a
core_initcall(), this means 'cgroup_memory_noswap' still remains set to
the default value (false) even when memcg is disabled via
"cgroup_disable=memory" boot parameter.
This may result in premature OOPS inside mem_cgroup_get_nr_swap_pages()
function in corner cases:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188
Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
[0000000000000188] user address but active_mm is swapper
Internal error: Oops: 96000006 [#1] SMP
Modules linked in:
<..snip..>
Call trace:
mem_cgroup_get_nr_swap_pages+0x9c/0xf4
shrink_lruvec+0x404/0x4f8
shrink_node+0x1a8/0x688
do_try_to_free_pages+0xe8/0x448
try_to_free_pages+0x110/0x230
__alloc_pages_slowpath.constprop.106+0x2b8/0xb48
__alloc_pages_nodemask+0x2ac/0x2f8
alloc_page_interleave+0x20/0x90
alloc_pages_current+0xdc/0xf8
atomic_pool_expand+0x60/0x210
__dma_atomic_pool_init+0x50/0xa4
dma_atomic_pool_init+0xac/0x158
do_one_initcall+0x50/0x218
kernel_init_freeable+0x22c/0x2d0
kernel_init+0x18/0x110
ret_from_fork+0x10/0x18
Code: aa1403e39110600097f82a2714000011 (f940c663)
---[ end trace 9795948475817de4 ]---
Kernel panic - not syncing: Fatal exception
Rebooting in 10 seconds..
Fixes: eccb52e78809 ("mm: memcontrol: prepare swap controller setup for integration") Reported-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: James Morse <james.morse@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Link: http://lkml.kernel.org/r/1593641660-13254-2-git-send-email-bhsharma@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tom Rix [Fri, 24 Jul 2020 04:15:18 +0000 (21:15 -0700)]
mm: initialize return of vm_insert_pages
clang static analysis reports a garbage return
In file included from mm/memory.c:84:
mm/memory.c:1612:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn]
return err;
^~~~~~~~~~
The setting of err depends on a loop executing. So initialize err.
vfs/xattr: mm/shmem: kernfs: release simple xattr entry in a right way
After commit fdc85222d58e ("kernfs: kvmalloc xattr value instead of
kmalloc"), simple xattr entry is allocated with kvmalloc() instead of
kmalloc(), so we should release it with kvfree() instead of kfree().
Fixes: fdc85222d58e ("kernfs: kvmalloc xattr value instead of kmalloc") Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Daniel Xu <dxu@dxuuu.xyz> Cc: Chris Down <chris@chrisdown.name> Cc: Andreas Dilger <adilger@dilger.ca> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> [5.7] Link: http://lkml.kernel.org/r/20200704051608.15043-1-cgxu519@mykernel.net Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/mmap.c: close race between munmap() and expand_upwards()/downwards()
VMA with VM_GROWSDOWN or VM_GROWSUP flag set can change their size under
mmap_read_lock(). It can lead to race with __do_munmap():
Thread A Thread B
__do_munmap()
detach_vmas_to_be_unmapped()
mmap_write_downgrade()
expand_downwards()
vma->vm_start = address;
// The VMA now overlaps with
// VMAs detached by the Thread A
// page fault populates expanded part
// of the VMA
unmap_region()
// Zaps pagetables partly
// populated by Thread B
Similar race exists for expand_upwards().
The fix is to avoid downgrading mmap_lock in __do_munmap() if detached
VMAs are next to VM_GROWSDOWN or VM_GROWSUP VMA.
[akpm@linux-foundation.org: s/mmap_sem/mmap_lock/ in comment]
Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.20+] Link: http://lkml.kernel.org/r/20200709105309.42495-1-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression
If a tracee is uprobed and it hits int3 inserted by debugger, handle_swbp()
does send_sig(SIGTRAP, current, 0) which means si_code == SI_USER. This used
to work when this code was written, but then GDB started to validate si_code
and now it simply can't use breakpoints if the tracee has an active uprobe:
# gcc -g test.c -o test
# perf probe -x ./test -a unused_func
# perf record -e probe_test:unused_func gdb ./test -ex run
GNU gdb (GDB) 10.0.50.20200714-git
...
Program received signal SIGTRAP, Trace/breakpoint trap.
0x00007ffff7ddf909 in dl_main () from /lib64/ld-linux-x86-64.so.2
(gdb)
The tracee hits the internal breakpoint inserted by GDB to monitor shared
library events but GDB misinterprets this SIGTRAP and reports a signal.
Change handle_swbp() to use force_sig(SIGTRAP), this matches do_int3_user()
and fixes the problem.
This is the minimal fix for -stable, arch/x86/kernel/uprobes.c is equally
wrong; it should use send_sigtrap(TRAP_TRACE) instead of send_sig(SIGTRAP),
but this doesn't confuse GDB and needs another x86-specific patch.
projects / mirror_ubuntu-hirsute-kernel.git / log