Oscar Mateo [Wed, 4 Oct 2017 15:39:52 +0000 (08:39 -0700)]
drm/i915/cnl: Do not add an extra page for precaution in the Gen10 LRC size
BSpec indicates exactly 16752 DWORDs (17 pages), plus one page for PPHWSP. Please
notice that, when looking at the BSpec context image table, the right filter has
to be applied (e.g. "CNL") as some rows are excluded for specific GENs.
BSpec: 1383
v2: Update count and add BSpec tag (Joonas)
v3: Warning about filters in the commit message (Joonas)
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Fixes: 7fd0b1a ("drm/i915/cnl: Add Gen10 LRC size") Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1507131592-29209-1-git-send-email-oscar.mateo@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Arnd Bergmann [Thu, 5 Oct 2017 12:08:26 +0000 (14:08 +0200)]
drm/i915: avoid potential uninitialized variable use
One of the recent changes introduced a warning about
undefined behavior in the sanity checking:
drivers/gpu/drm/i915/intel_ddi.c: In function 'intel_ddi_hdmi_level':
drivers/gpu/drm/i915/intel_ddi.c:654:6: error: 'n_hdmi_entries' may be used uninitialized in this function [-Werror=maybe-uninitialized]
It seems that the new cnl specific get_buf_trans functions
can return uninitialized data if the voltage level is set
to an unexpected value. This changes the code to always return
'1' in that error case, which seems like the safest choice
as we use one less than the number as an array index later on.
Arnd Bergmann [Thu, 5 Oct 2017 12:07:22 +0000 (14:07 +0200)]
drm/i915/selftests: fix check for intel IOMMU
An earlier bugfix tried to work around this build failure:
drivers/gpu/drm/i915/selftests/mock_gem_device.c: In function 'mock_gem_device':
drivers/gpu/drm/i915/selftests/mock_gem_device.c:151:20: error: 'struct dev_archdata' has no member named 'iommu'
Checking for CONFIG_IOMMU_API is not sufficient as a compile-time
test since that may be enabled in configurations that have neither
INTEL_IOMMU not AMD_IOMMU enabled. This changes the check to
INTEL_IOMMU instead, as this is the only case we actually care about.
Chris Wilson [Thu, 5 Oct 2017 10:59:27 +0000 (11:59 +0100)]
drm/i915/selftests: Remember to create the fake preempt context
For the fake device we have our own set of mock contexts that need to
match the real contexts we normally create. Currently this requires us
to manually instantiate them for the selftests, which I forgot.
Reported-by: Matthew Auld <matthew.william.auld@gmail.com> Fixes: e7af3116836f ("drm/i915: Introduce a preempt context") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171005105927.22991-1-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Manasi Navare [Tue, 3 Oct 2017 23:37:25 +0000 (16:37 -0700)]
drm/i915/edp: Increase the T12 delay quirk to 1300ms
For this specific PCI device, the eDP panel requires a higher panel
power cycle delay of 1300ms where the minimum spec requirement of panel
power cycle delay is 500ms. This fix in combination with correct
timestamp at which we get the panel power off time fixes the dP AUX CH
timeouts seen on various IGT tests.
Fixes: c99a259b4b5192ba ("drm/i915/edp: Add a T12 panel delay quirk to fix
DP AUX CH timeouts")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101518 Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1507073845-13420-2-git-send-email-manasi.d.navare@intel.com
Manasi Navare [Wed, 4 Oct 2017 16:48:26 +0000 (09:48 -0700)]
drm/i915/edp: Get the Panel Power Off timestamp after panel is off
Kernel stores the time in jiffies at which the eDP panel is turned
off. This should be obtained after the panel is off (after the
wait_panel_off). When we next attempt to turn the panel on, we use the
difference between the timestamp at which we want to turn the panel on
and timestamp at which panel was turned off to ensure that this is equal
to panel power cycle delay and if not we wait for the remaining
time. Not waiting for the panel power cycle delay can cause the panel to
not turn on giving rise to AUX timeouts for the attempted AUX
transactions.
v2:
* Separate lines for bugzilla (Jani Nikula)
* Suggested by tag (Daniel Vetter)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101518
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144 Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1507135706-17147-1-git-send-email-manasi.d.navare@intel.com
drm/i915/mst: Use MST sideband message transactions for dpms control
Use the POWER_DOWN_PHY and POWER_UP_PHY sideband message transactions to
set power states for downstream sinks. Apart from giving us the ability
to set power state for individual sinks, this fixes the below test for
me.
Chris Wilson [Tue, 3 Oct 2017 20:34:53 +0000 (21:34 +0100)]
drm/i915/scheduler: Support user-defined priorities
Use a priority stored in the context as the initial value when
submitting a request. This allows us to change the default priority on a
per-context basis, allowing different contexts to be favoured with GPU
time at the expense of lower importance work. The user can adjust the
context's priority via I915_CONTEXT_PARAM_PRIORITY, with more positive
values being higher priority (they will be serviced earlier, after their
dependencies have been resolved). Any prerequisite work for an execbuf
will have its priority raised to match the new request as required.
Normal users can specify any value in the range of -1023 to 0 [default],
i.e. they can reduce the priority of their workloads (and temporarily
boost it back to normal if so desired).
Privileged users can specify any value in the range of -1023 to 1023,
[default is 0], i.e. they can raise their priority above all overs and
so potentially starve the system.
Note that the existing schedulers are not fair, nor load balancing, the
execution is strictly by priority on a first-come, first-served basis,
and the driver may choose to boost some requests above the range
available to users.
This priority was originally based around nice(2), but evolved to allow
clients to adjust their priority within a small range, and allow for a
privileged high priority range.
For example, this can be used to implement EGL_IMG_context_priority
https://www.khronos.org/registry/egl/extensions/IMG/EGL_IMG_context_priority.txt
EGL_CONTEXT_PRIORITY_LEVEL_IMG determines the priority level of
the context to be created. This attribute is a hint, as an
implementation may not support multiple contexts at some
priority levels and system policy may limit access to high
priority contexts to appropriate system privilege level. The
default value for EGL_CONTEXT_PRIORITY_LEVEL_IMG is
EGL_CONTEXT_PRIORITY_MEDIUM_IMG."
so we can map
PRIORITY_HIGH -> 1023 [privileged, will failback to 0]
PRIORITY_MED -> 0 [default]
PRIORITY_LOW -> -1023
They also map onto the priorities used by VkQueue (and a VkQueue is
essentially a timeline, our i915_gem_context under full-ppgtt).
v2: s/CAP_SYS_ADMIN/CAP_SYS_NICE/
v3: Report min/max user priorities as defines in the uapi, and rebase
internal priorities on the exposed values.
Chris Wilson [Tue, 3 Oct 2017 20:34:52 +0000 (21:34 +0100)]
drm/i915/execlists: Preemption!
When we write to ELSP, it triggers a context preemption at the earliest
arbitration point (3DPRIMITIVE, some PIPECONTROLs, a few other
operations and the explicit MI_ARB_CHECK). If this is to the same
context, it triggers a LITE_RESTORE where the RING_TAIL is merely
updated (used currently to chain requests from the same context
together, avoiding bubbles). However, if it is to a different context, a
full context-switch is performed and it will start to execute the new
context saving the image of the old for later execution.
Previously we avoided preemption by only submitting a new context when
the old was idle. But now we wish embrace it, and if the new request has
a higher priority than the currently executing request, we write to the
ELSP regardless, thus triggering preemption, but we tell the GPU to
switch to our special preemption context (not the target). In the
context-switch interrupt handler, we know that the previous contexts
have finished execution and so can unwind all the incomplete requests
and compute the new highest priority request to execute.
It would be feasible to avoid the switch-to-idle intermediate by
programming the ELSP with the target context. The difficulty is in
tracking which request that should be whilst maintaining the dependency
change, the error comes in with coalesced requests. As we only track the
most recent request and its priority, we may run into the issue of being
tricked in preempting a high priority request that was followed by a
low priority request from the same context (e.g. for PI); worse still
that earlier request may be our own dependency and the order then broken
by preemption. By injecting the switch-to-idle and then recomputing the
priority queue, we avoid the issue with tracking in-flight coalesced
requests. Having tried the preempt-to-busy approach, and failed to find
a way around the coalesced priority issue, Michal's original proposal to
inject an idle context (based on handling GuC preemption) succeeds.
The current heuristic for deciding when to preempt are only if the new
request is of higher priority, and has the privileged priority of
greater than 0. Note that the scheduler remains unfair!
v2: Disable for gen8 (bdw/bsw) as we need additional w/a for GPGPU.
Since, the feature is now conditional and not always available when we
have a scheduler, make it known via the HAS_SCHEDULER GETPARAM (now a
capability mask).
v3: Stylistic tweaks.
v4: Appease Joonas with a snippet of kerneldoc, only to fuel to fire of
the preempt vs preempting debate.
Suggested-by: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-8-chris@chris-wilson.co.uk
Chris Wilson [Tue, 3 Oct 2017 20:34:51 +0000 (21:34 +0100)]
drm/i915: Expand I915_PARAM_HAS_SCHEDULER into a capability bitmask
In the next few patches, we wish to enable different features for the
scheduler, some which may subtlety change ABI (e.g. allow requests to be
reordered under different circumstances). So we need to make sure
userspace is cognizant of the changes (if they care), by which we employ
the usual method of a GETPARAM. We already have an
I915_PARAM_HAS_SCHEDULER (which notes the existing ability to reorder
requests to avoid bubbles), and now we wish to extend that to be a
bitmask to describe the different capabilities implemented.
Chris Wilson [Tue, 3 Oct 2017 20:34:50 +0000 (21:34 +0100)]
drm/i915/execlists: Keep request->priority for its lifetime
With preemption, we will want to "unsubmit" a request, taking it back
from the hw and returning it to the priority sorted execution list. In
order to know where to insert it into that list, we need to remember
its adjust priority (which may change even as it was being executed).
This also affects reset for execlists as we are now unsubmitting the
requests following the reset (rather than directly writing the ELSP for
the inflight contexts). This turns reset into an accidental preemption
point, as after the reset we may choose a different pair of contexts to
submit to hw.
GuC is not updated as this series doesn't add preemption to the GuC
submission, and so it can keep benefiting from the early pruning of the
DFS inside execlists_schedule() for a little longer. We also need to
find a way of reducing the cost of that DFS...
Chris Wilson [Tue, 3 Oct 2017 20:34:48 +0000 (21:34 +0100)]
drm/i915: Introduce a preempt context
Add another perma-pinned context for using for preemption at any time.
We cannot just reuse the existing kernel context, as first and foremost
we need to ensure that we can preempt the kernel context itself, so
require a distinct context id. Similar to the kernel context, we may
want to interrupt execution and switch to the preempt context at any
time, and so it needs to be permanently pinned and available.
To compensate for yet another permanent allocation, we shrink the
existing context and the new context by reducing their ringbuffer to the
minimum.
v2: Assert that we never allocate a request from the preemption context.
v3: Limit perma-pin to engines that may preempt.
v4: Onion cleanup for early driver death
v5: Onion ordering in main driver cleanup as well.
drm/i915/preempt: Default to disabled mid-command preemption levels
Supporting fine-granularity preemption levels may require changes in
userspace batch buffer programming. Therefore, we need to fallback to
safe default values, rather that use hardware defaults. Userspace is
still able to enable fine-granularity, since we're whitelisting the
register controlling it in WaEnablePreemptionGranularityControlByUMD.
v2: Extend w/a to cover Cannonlake
v3: Fix commentary to include both fake w/a names.
Chris Wilson [Wed, 4 Oct 2017 12:41:53 +0000 (13:41 +0100)]
drm/i915: Remove WA_(SET|CLR)_BIT
These macros are of dubious merit when coupled with the per-context w/a
set. Instead of tweaking the value in the context, they tweak the value
based on the mmio at the time of recording; they are almost by
definition not per-context! Having removed the last users, remove the
macros to avoid temptation in the future.
Chris Wilson [Wed, 4 Oct 2017 12:41:52 +0000 (13:41 +0100)]
drm/i915: Move MMCD_MISC_CTRL from context w/a to standard
Looking at gem_workarounds shows us that MMCD_MISC_CTRL is not restored
following a suspend-resume cycle. This implies that MMCD_MISC_CTRL is
not stored in the context, but is an ordinary register w/a that we need to
restore during init_hw.
Oscar Mateo [Thu, 28 Sep 2017 22:40:39 +0000 (15:40 -0700)]
drm/i915: Transform whitelisting WAs into a simple reg write
RING_FORCE_TO_NONPRIV registers do not live in the logical context. They are simply
global privileged MMIO registers that happen to be powercontext saved and restored
(meaning only they can survive RC6). Therefore, there is absolutely no need to save
them so that they can be restored everytime we create a new logical context.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1506638439-6903-1-git-send-email-oscar.mateo@intel.com Acked-by: Michel Thierry <michel.thierry@intel.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> #bxt Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
drm/i915: Unset legacy_cursor_update early in intel_atomic_commit, v3.
Commit b44d5c0c105a ("drm/i915: Always wait for flip_done, v2.") removed
the call to wait_for_vblanks and replaced it with flip_done.
Unfortunately legacy_cursor_update was unset too late, and the
replacement call drm_atomic_helper_wait_for_flip_done() was
a noop. Make sure that its unset before setup_commit() is
called to fix this issue.
Changes since v1:
- Force vblank wait for watermarks not yet converted to atomic too. (Ville)
- Use for_each_new_intel_crtc_in_state. (Ville)
Changes since v2:
- Move the optimization to a separate commit. (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: b44d5c0c105a ("drm/i915: Always wait for flip_done, v2.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102675
Testcase: kms_cursor_crc Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reported-by: Marta Löfstedt <marta.lofstedt@intel.com> Cc: Marta Löfstedt <marta.lofstedt@intel.com> Tested-by: Marta Löfstedt <marta.lofstedt@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170919121419.13708-1-maarten.lankhorst@linux.intel.com
Rodrigo Vivi [Tue, 3 Oct 2017 06:36:51 +0000 (23:36 -0700)]
drm/i915: Organize GEN features inheritance.
As Chris noticed the current organization is confusing
and inheritance is not clear.
So, let's split it in GEN<n>_FEATURES <cdn>_PLATFORM
where new GEN inherit features from previous gens and
Platforms only use gen features plus what ever is specific
for that platform and shouldn't be passed on.
Rodrigo Vivi [Tue, 3 Oct 2017 06:36:50 +0000 (23:36 -0700)]
drm/i915/skl: Fix has_ipc on skl and document WaDisableIPC.
According to Spec for SKL+: "Isochronous Priority Control.
If enabled, Display sends demoted requests once the transition
watermark is reached. If transition watermark is not enabled,
Display sends demoted requests when the display buffer is full."
The commit 'e57f1c02155f ("drm/i915/gen9+: Add has_ipc flag in
device info structure")' introduced that as gen9+ but missing many
SKL Skus.
I believe the reason for that is Spec also mentions workarounds for
SKL-ALL: "IPC (Isoch Priority Control) may cause underflows
WA: Do not enable IPC in register ARB_CTL2"
It seems lame to add the feature and forever disable it,
but it will avoid a mistake of enabling it when we are reorganizing
the feature definitions on i915_pci.c later.
It will also allow us to probably extend that workaround for
other platforms.
Imre Deak [Mon, 2 Oct 2017 13:53:07 +0000 (16:53 +0300)]
drm/i915: Fix DDI PHY init if it was already on
The common lane power down flag of a DPIO PHY has a funky semantic:
after the initial enabling of the PHY (so from a disabled state) this
flag will be clear. It will be set only after the PHY will be used for
the first time (for instance due to enabling the corresponding pipe) and
then become unused (due to disabling the pipe). During the initial PHY
enablement we don't know which of the above phases we are in, so move
the check for the flag where this is known, the HW readout code. This is
where the rest of lane power down status checks are done anyway.
This fixes at least a problem on GLK where after module reloading, the
common lane power down flag of PHY1 is set, but the PHY is actually
powered-on and properly set up. The GRC readout code for other PHYs will
hence think that PHY1 is not powered initially and disable it after the
GRC readout. This will cause the AUX power well related to PHY1 to get
disabled in a stuck state, timing out when we try to enable it later.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Fixes: e93da0a0137b ("drm/i915/bxt: Sanitiy check the PHY lane power down status")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102777 Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171002135307.26117-1-imre.deak@intel.com
On GLK and CNL enabling a pipe with its pipe scaler enabled will result
in a FIFO underrun. This happens only once after driver loading or
system/runtime resume, more specifically after power well 1 gets
enabled; subsequent modesets seem to be free of underruns. The BSpec
workaround for this is to disable the pipe scaler clock gating for the
duration of modeset. Based on my tests disabling clock gating must be
done before enabling pipe scaling and we can re-enable it after the pipe
is enabled and one vblank has passed.
For consistency I also checked if plane scaling would cause the same
problem, but that doesn't seem to trigger this problem.
The patch is based on an earlier version from Ander.
v2 (Rodrigo):
- Set also CLKGATE_DIS_PSL bits 8 and 9.
- Add also the BSpec workaround ID.
David Weinehall [Tue, 8 Aug 2017 10:09:52 +0000 (13:09 +0300)]
drm/i915: Add has_psr-flag to gen9lp
While testing Jim Bride's latest batch of PSR patches I noticed
that gen9lp doesn't include the has_psr flag, and that our GLK
system thus reported PSR as unsupported.
Imre Deak [Thu, 28 Sep 2017 10:06:24 +0000 (13:06 +0300)]
drm/i915/gen8+: Init/reset display interrupts only if i915 IRQs are enabled
Only init / reset the display interrupts during power well enabling /
disabling if the i915 interrupts are enabled. So far we did the
init / reset during driver loading / resuming too, where
initialization / enabling of the i915 interrupts happens only at a later
point. This didn't cause a problem due to GEN8_MASTER_IRQ_CONTROL being
cleared, but triggered gen3_assert_iir_is_zero() in GEN8_IRQ_INIT_NDX().
Imre Deak [Wed, 16 Aug 2017 14:46:07 +0000 (17:46 +0300)]
drm/i915/gen9+: Set same power state before hibernation image save/restore
Atm, on GEN9 big core platforms before saving the hibernation image we
uninitialize the display, disabling power wells manually, while before
restoring the image we keep things powered (letting HW/DMC power down
things as needed). The state mismatch will trigger the following error:
DC state mismatch (0x0 -> 0x2)
While the restore handler knows how to initialize the display from an
unknown state (due to a different loader kernel or not having i915
loaded in the loader kernel) we should still use the same state for
consistency before image saving and restoring. Do this by uniniting the
display before restoring the image too.
Bugzilla: https://bugs.freedesktop.org/attachment.cgi?id=133376 Reported-and-tested-by: Wang Wendy <wendy.wang@intel.com> Reported-and-tested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Wang Wendy <wendy.wang@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170816144607.9935-1-imre.deak@intel.com
Chris Wilson [Thu, 28 Sep 2017 19:39:00 +0000 (20:39 +0100)]
drm/i915: Give the invalid priority a magic name
We use INT_MIN to denote the priority of a request that has not been
submitted to the scheduler; we treat INT_MIN as an invalid priority and
initialise the request to it. Give the value a name so it stands out.
Chris Wilson [Thu, 28 Sep 2017 19:38:59 +0000 (20:38 +0100)]
drm/i915/execlists: Move request unwinding to a separate function
In the future, we will want to unwind requests following a preemption
point. This requires the same steps as for unwinding upon a reset, so
extract the existing code to a separate function for later use.
drm/i915: Move i915_gem_restore_fences to i915_gem_resume
i915_gem_restore_fences is GEM resumption task hence it is moved to
i915_gem_resume from i915_restore_state.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1506661116-12106-1-git-send-email-sagar.a.kamble@intel.com Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Tue, 26 Sep 2017 15:34:09 +0000 (16:34 +0100)]
drm/i915/selftests: Replace wmb() with i915_gem_chipset_flush()
Currently, we are being fairly lazy and only using a wmb() following an
update to an active batch. Previously, we have found that to be
insufficient to ensure that a write from the CPU reaches memory in a
timely fashion, and in some caches we may need to flush a chipset cache.
To that end, we have i915_gem_chipset_flush() so use it.
drm/i915: Also discard second CRC on gen8+ platforms.
One of the differences I spotted for GEN8+ platforms when
compared to older platforms is that spec for BDW+ includes
this sentence:
"The first CRC done indication after CRC is first enabled is
from only a partial frame, so it will not have the expected
CRC result."
This is an indication that on BDW+ platforms, by the time
we receive the interrupt the CRC is not accurate yet for
the full frame. That would be ok, because we are already
skipping the first CRC for all platforms. However the comment
on the code state that it is for some unknown reason. Also,
on CHV (gen8 lp) we were already discarding the second CRC
as well to make sure we have a reliable CRC on hand.
So based on all ou tests and bugs it seems that it is not
on CHV that needs to discard 2 first CRCs, but all BDW+
platforms.
Starting on SKL we have this CRC done bit (24), but the
experiments around the use of this bit wasn't that stable
as just discarding the second CRC. So, let's for now
just move with CHV solution for all gen8+ platforms and
make our CI a bit more stable.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102374
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101309 Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Tested-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170928002040.7917-1-rodrigo.vivi@intel.com
Add defines for dpcd register 2009 (synchronization latency
in sink).
v2:
- add spec version (Daniel)
- use register name as is in spec,only drop excess
from end (jani)
- add the full register contents (jani)
[Rodrigo fixed spec version when merging]
If we store the platform as a bitmask, and convert the
IS_PLATFORM macro to use it, we allow the compiler to
merge the IS_PLATFORM(a) || IS_PLATFORM(b) || ... checks
into a single conditional.
As a secondary benefit this saves almost 1k of text:
text data bss dec hex filename
-1460254 60014 3656 1523924 1740d4 drivers/gpu/drm/i915/i915.ko
+1459260 60026 3656 1522942 173cfe drivers/gpu/drm/i915/i915.ko
Dave Airlie [Wed, 27 Sep 2017 22:37:02 +0000 (08:37 +1000)]
Merge branch 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux into drm-next
First feature pull for 4.15. Highlights:
- Per VM BO support
- Lots of powerplay cleanups
- Powerplay support for CI
- pasid mgr for kfd
- interrupt infrastructure for recoverable page faults
- SR-IOV fixes
- initial GPU reset for vega10
- prime mmap support
- ttm page table debugging improvements
- lots of bug fixes
* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: (232 commits)
drm/amdgpu: clarify license in amdgpu_trace_points.c
drm/amdgpu: Add gem_prime_mmap support
drm/amd/powerplay: delete dead code in smumgr
drm/amd/powerplay: delete SMUM_FIELD_MASK
drm/amd/powerplay: delete SMUM_WAIT_INDIRECT_FIELD
drm/amd/powerplay: delete SMUM_READ_FIELD
drm/amd/powerplay: delete SMUM_SET_FIELD
drm/amd/powerplay: delete SMUM_READ_VFPF_INDIRECT_FIELD
drm/amd/powerplay: delete SMUM_WRITE_VFPF_INDIRECT_FIELD
drm/amd/powerplay: delete SMUM_WRITE_FIELD
drm/amd/powerplay: delete SMU_WRITE_INDIRECT_FIELD
drm/amd/powerplay: move macros to hwmgr.h
drm/amd/powerplay: move PHM_WAIT_VFPF_INDIRECT_FIELD to hwmgr.h
drm/amd/powerplay: move SMUM_WAIT_VFPF_INDIRECT_FIELD_UNEQUAL to hwmgr.h
drm/amd/powerplay: move SMUM_WAIT_INDIRECT_FIELD_UNEQUAL to hwmgr.h
drm/amd/powerplay: add new helper functions in hwmgr.h
drm/amd/powerplay: use SMU_IND_INDEX/DATA_11 pair
drm/amd/powerplay: refine powerplay code.
drm/amd/powerplay: delete dead code in hwmgr.h
drm/amd/powerplay: refine interface in struct pp_smumgr_func
...
Dave Airlie [Wed, 27 Sep 2017 21:12:44 +0000 (07:12 +1000)]
Merge tag 'drm-intel-next-2017-09-07' of git://anongit.freedesktop.org/git/drm-intel into drm-next
Getting started with v4.15 features:
- Cannonlake workarounds (Rodrigo, Oscar)
- Infoframe refactoring and fixes to enable infoframes for DP (Ville)
- VBT definition updates (Jani)
- Sparse warning fixes (Ville, Chris)
- Crtc state usage fixes and cleanups (Ville)
- DP vswing, pre-emph and buffer translation refactoring and fixes (Rodrigo)
- Prevent IPS from interfering with CRC capture (Ville, Marta)
- Enable Mesa to advertise ARB_timer_query (Nanley)
- Refactor GT number into intel_device_info (Lionel)
- Avoid eDP DP AUX CH timeouts harder (Manasi)
- CDCLK check improvements (Ville)
- Restore GPU clock boost on missed pageflip vblanks (Chris)
- Fence register reservation API for vGPU (Changbin)
- First batch of CCS fixes (Ville)
- Finally, numerous GEM fixes, cleanups and improvements (Chris)
* tag 'drm-intel-next-2017-09-07' of git://anongit.freedesktop.org/git/drm-intel: (100 commits)
drm/i915: Update DRIVER_DATE to 20170907
drm/i915/cnl: WaThrottleEUPerfToAvoidTDBackPressure:cnl(pre-prod)
drm/i915: Lift has-pinned-pages assert to caller of ____i915_gem_object_get_pages
drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk
drm/i915/cnl: Allow the reg_read ioctl to read the RCS TIMESTAMP register
drm/i915: Move device_info.has_snoop into the static tables
drm/i915: Disable MI_STORE_DATA_IMM for i915g/i915gm
drm/i915: Re-enable GTT following a device reset
drm/i915/cnp: Wa 1181: Fix Backlight issue
drm/i915: Annotate user relocs with __user
drm/i915: Constify load detect mode
drm/i915/perf: Remove __user from u64 in drm_i915_perf_oa_config
drm/i915: Silence sparse by using gfp_t
drm/i915: io unmap functions want __iomem
drm/i915: Add __rcu to radix tree slot pointer
drm/i915: Wake up the device for the fbdev setup
drm/i915: Add interface to reserve fence registers for vGPU
drm/i915: Use correct path to trace include
drm/i915: Fix the missing PPAT cache attributes on CNL
drm/i915: Fix enum pipe vs. enum transcoder for the PCH transcoder
...
Dave Airlie [Wed, 27 Sep 2017 19:45:27 +0000 (05:45 +1000)]
Merge tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc into drm-next
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- DP SDP defines (Ville)
- polish for scdc helpers (Thierry Reding)
- fix lifetimes for connector/plane state across crtc changes (Maarten
Lankhorst).
- sparse fixes (Ville+Thierry)
- make legacy kms ioctls all interruptible (Maarten)
- push edid override into the edid helpers (out of probe helpers)
(Jani)
- DP ESI defines for link status (DK)
Driver Changes:
- drm-panel is now in drm-misc!
- minor panel-simple cleanups/refactoring by various folks
- drm_bridge_add cleanup (Inki Dae)
- constify a few i2c_device_id structs (Arvind Yadav)
- More patches from Noralf's fb/gem helper cleanup
- bridge/synopsis: reset fix (Philippe Cornu)
- fix tracepoint include handling in drivers (Thierry)
- rockchip: lvds support (Sandy Huang)
- move sun4i into drm-misc fold (Maxime Ripard)
- sun4i: refactor driver load + support TCON backend/layer muxing
(Chen-Yu Tsai)
- pl111: support more pl11x variants (Linus Walleij)
- bridge/adv7511: robustify probing/edid handling (Lars-Petersen
Clausen)
Plus assorted of tiny patches all over, including our first outreachy
patches from applicants for the winter round!
* tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits)
drm: add backwards compatibility support for drm_kms_helper.edid_firmware
drm: handle override and firmware EDID at drm_do_get_edid() level
drm/dp: DPCD register defines for link status within ESI field
drm/rockchip: Replace dev_* with DRM_DEV_*
drm/tinydrm: Drop driver registered message
drm/gem-fb-helper: Use debug message on gem lookup failure
drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
drm/bridge: adv7511: Constify HDMI CODEC platform data
drm/bridge: adv7511: Enable connector polling when no interrupt is specified
drm/bridge: adv7511: Remove private copy of the EDID
drm/bridge: adv7511: Properly update EDID when no EDID was found
drm/crtc: Convert setcrtc ioctl locking to interruptible.
drm/atomic: Convert pageflip ioctl locking to interruptible.
drm/legacy: Convert setplane ioctl locking to interruptible.
drm/legacy: Convert cursor ioctl locking to interruptible.
drm/atomic: Convert atomic ioctl locking to interruptible.
drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2.
drm/tve200: Clean up panel bridging
drm/doc: Update todo.rst
drm/dp/mst: Sideband message transaction to power up/down nodes
...
drm/i915: Avoid using dev_priv->info.gen directly.
Let's stop this usage before it spreads so much.
1. This check is not part of usual searches happening when adding
new platform.
2. There is already a duplication here with INTEL_INFO(dev_priv)->gen
and INTEL_GEN(dev_priv).
So let's please avoid yet another way.
Cc: Lyude <cpaul@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170926211346.12009-1-rodrigo.vivi@intel.com
Use the %pS printk format for printing symbols from direct addresses.
This is important for the ia64, ppc64 and parisc64 architectures, while on
other architectures there is no difference between %pS and %pF.
Fix it for consistency across the kernel.
Chris Wilson [Tue, 26 Sep 2017 10:17:19 +0000 (11:17 +0100)]
drm/i915/execlists: Notify context-out for lost requests
When cancelling requests, also send the notification to any listeners
(gvt) that the request is no longer scheduled on hw. They may require to
keep the in/out exactly balanced, and so the reuse after the reset may
confuse the listener.
Fixes: 221ab9719bf3 ("drm/i915/execlists: Unwind incomplete requests on resets") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Zhenyu Wang" <zhenyuw@linux.intel.com> Cc: "Wang, Zhi A" <zhi.a.wang@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170926101720.9479-1-chris@chris-wilson.co.uk Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Ben Widawsky [Wed, 20 Sep 2017 18:35:24 +0000 (11:35 -0700)]
drm/i915/cnl: Add support slice/subslice/eu configs
Cannonlake Slice and Subslice information has changed.
This patch initially provided by Ben adds the proper sseu
initialization.
v2: This v2 done by Rodrigo includes:
- Fix on Total slices count by avoiding [1][2] and [2][2].
- Inclusion of EU Per Subslice.
- Commit message.
v3: This v3 done by Rodrigo includes:
- Handle all possible bits and extra fuse register.
- Use INTEL_GEN macro.
- Fully assume uniform distribution so remove union
with eu_per_subslice and add proper the comment.
v4: This v4 done by Rodrigo includes:
- Consider all bits available: 6 bits for slices [27:22]
and 4 for subslices [21:18].
v5: This v5 done by Rodrigo includes:
- sseu->subslice_mask = (1 << 4) - 1 - missed on previous
versions and noticed by Oscar.
Alex Deucher [Tue, 19 Sep 2017 14:20:27 +0000 (10:20 -0400)]
drm/amdgpu: clarify license in amdgpu_trace_points.c
It was not clear. The rest of the driver is MIT/X11.
Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samuel Li [Tue, 22 Aug 2017 19:25:33 +0000 (15:25 -0400)]
drm/amdgpu: Add gem_prime_mmap support
v2: drop hdp invalidate/flush.
v3: honor pgoff during prime mmap. Add a barrier after cpu access.
v4: drop begin/end_cpu_access() for now, revisit later.
Signed-off-by: Samuel Li <Samuel.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 11 Sep 2017 15:29:26 +0000 (17:29 +0200)]
drm/amdgpu: simplify pinning into visible VRAM
Just set the CPU access required flag when we pin it.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Tue, 19 Sep 2017 08:09:53 +0000 (16:09 +0800)]
drm/amdgpu:fix firmware memoryleak(v2)
this fix memory leak due to request_firmware after driver
unloaded
v2:
release gmc firmware for gmc6/7/8 as well
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Fri, 15 Sep 2017 08:43:01 +0000 (16:43 +0800)]
drm/amdgpu:fix uvd ring fini routine(v2)
fix missing finish uvd enc_ring.
v2:
since the adev pointer check in already in ring_fini
so drop the check outsider
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 21 Sep 2017 07:10:06 +0000 (15:10 +0800)]
drm/amdgpu/sriov:alloc KIQ MQD in VRAM(v2)
this way after KIQ MQD released in drv unloading, CPC
can still let KIQ access this MQD thus RLCV SAVE_VF
will not fail
v2:
always use VRAM domain for KIQ MQD no matter BM or SRIOV
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 21 Sep 2017 06:59:40 +0000 (14:59 +0800)]
drm/amdgpu:unmap KCQ in gfx hw_fini(v2)
v2:
move kcq_disable out of SRIOV, make it genearal
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Tue, 4 Jul 2017 08:40:58 +0000 (16:40 +0800)]
drm/amdgpu:halt when vm fault
only with this way we can debug the VMC page fault issue
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Add copy_pte_num_dw member in amdgpu_vm_pte_funcs
Use it to replace the hard coded value in amdgpu_vm_bo_update_mapping().
Signed-off-by: Yong Zhao <yong.zhao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When max_bytes is not 8 bytes aligned and bo size is larger than
max_bytes, the last 8 bytes in a ttm node may be left unchanged.
For example, on pre SDMA 4.0, max_bytes = 0x1fffff, and the bo size
is 0x200000, the problem will happen.
In order to fix the problem, we separately store the max nums of
PTEs/PDEs a single operation can set in amdgpu_vm_pte_funcs
structure, rather than inferring it from bytes limit of SDMA
constant fill, i.e. fill_max_bytes.
Together with the fix, we replace the hard code value "10" in
amdgpu_vm_bo_update_mapping() with the corresponding values from
structure amdgpu_vm_pte_funcs.
Signed-off-by: Yong Zhao <yong.zhao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Correct bytes limit for SDMA 3.0 copy and fill
Signed-off-by: Yong Zhao <yong.zhao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 18 Sep 2017 12:32:38 +0000 (14:32 +0200)]
drm/amdgpu: use 2MB fragment size for GFX6,7 and 8
Use 2MB fragment size by default for older hardware generations as well.
Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: John Bridgman <john.bridgman@amd.com> Reviewed-by: Roger He <Hongbo.He@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SRIOV doesn't implement PMC capability of PCIe, so it can't update
power state by reading PMC register.
Currently, amdgpu driver doesn't disable pci device when removing
driver, the enable_cnt of pci device will not be decrease to 0.
When reloading driver, pci_enable_device will do nothing as
enable_cnt is not zero. And power state will not be updated as PMC
is not support.
So current_state of pci device is not D0 state and pci_enable_msi
return fail.
Add pci_disable_device when remmoving driver to fix the issue.
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / mirror_ubuntu-bionic-kernel.git / log