Ben Skeggs [Tue, 17 Jul 2018 23:33:39 +0000 (09:33 +1000)]
drm/nouveau/kms/nv50-: allocate push buffers in vidmem on pascal
Workaround for issues seen on systems with large amounts of RAM, caused
by display not supporting the same physical address limits as the other
parts of the GPU.
Dave Airlie [Wed, 18 Jul 2018 19:46:24 +0000 (05:46 +1000)]
Merge tag 'drm-intel-next-2018-07-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Higlights here goes to many PSR fixes and improvements; to the Ice lake work with
power well support and begin of DSI support addition. Also there were many improvements
on execlists and interrupts for minimal latency on command submission; and many fixes
on selftests, mostly caught by our CI.
General driver:
- Clean-up on aux irq (Lucas)
- Mark expected switch fall-through for dealing with static analysis tools (Gustavo)
Gem:
- Different fixes for GuC (Chris, Anusha, Michal)
- Avoid self-relocation BIAS if no relocation (Chris)
- Improve debugging cases in on EINVAL return and vma allocation (Chris)
- Fixes and improvements on context destroying and freeing (Chris)
- Wait for engines to idle before retiring (Chris)
- Many improvements on execlists and interrupts for minimal latency on command submission (Chris)
- Many fixes in selftests, specially on cases highlighted on CI (Chris)
- Other fixes and improvements around GGTT (Chris)
- Prevent background reaping of active objects (Chris)
Display:
- Parallel modeset cleanup to fix driver reset (Chris)
- Get AUX power domain for DP main link (Imre)
- Clean-up on PSR unused func pointers (Rodrigo)
- Many PSR/PSR2 fixes and improvements (DK, Jose, Tarun)
- Add a PSR1 live status (Vathsala)
- Replace old drm_*_{un/reference} with put,get functions (Thomas)
- FBC fixes (Maarten)
- Abstract and document the usage of picking macros (Jani)
- Remove unnecessary check for unsupported modifiers for NV12. (DK)
- Interrupt fixes for display (Ville)
- Clean up on sdvo code (Ville)
- Clean up on current DSI code (Jani)
- Remove support for legacy debugfs crc interface (Maarten)
- Simplify get_encoder_power_domains (Imre)
Icelake:
- MG PLL fixes (Imre)
- Add hw workaround for alpha blending (Vandita)
- Add power well support (Imre)
- Add Interrupt Support (Anusha)
- Start to add support for DSI on Ice Lake (Madhav)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Tue 10 Jul 2018 08:41:37 AM AEST
# gpg: using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA Link: https://patchwork.freedesktop.org/patch/msgid/20180710234349.GA16562@intel.com
drm/sun4i: Substitute sun4i_backend_format_is_yuv() with format->is_yuv
drm_format_info table has a field 'is_yuv' to denote if the format
is yuv or not. The driver is expected to use this instead of
having a function for the same purpose.
drm/rockchip: Substitute is_yuv_support() with format->is_yuv
drm_format_info table has a field 'is_yuv' to denote if the format
is yuv or not. The driver is expected to use this instead of
having a function for the same purpose.
drm/i915: Substitute intel_format_is_yuv() with format->is_yuv
drm_format_info table has a field 'is_yuv' to denote if the format
is yuv or not. The driver is expected to use this instead of
having a function for the same purpose.
drm/fourcc: Add is_yuv field to drm_format_info to denote if the format is yuv
A lot of drivers duplicate the function to check if a format is yuv or not.
If we add a field (to denote whether the format is yuv or not) in the
drm_format_info table, all the drivers can use this field and it will
prevent duplication of similar logic.
drm/pl111: Use 64-bit arithmetic instead of 32-bit
Add suffix ULL to constant 1000 in order to give the compiler complete
information about the proper arithmetic to use.
Notice that such constant is used in a context that expects an
expression of type u64 (64 bits, unsigned) and the following
expression is currently being evaluated using 32-bit arithmetic:
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
drm/sun4i: sun8i: Avoid clearing blending order at each atomic commit
Blending order is set based on the z position of each DRM plane. The
blending order register is currently cleared at each atomic DRM commit,
with the intent that each committed plane will set the appropriate
bits (based on its z-pos) when enabling the plane.
However, it sometimes happens that a particular plane is left unchanged
by an atomic commit and thus will not be configured again. In that
scenario, blending order is cleared and only the bits relevant for the
planes affected by the commit are set. This leaves the planes that did
not change without their blending order set in the register, leading
to that plane not being displayed.
Instead of clearing the blending order register at every atomic commit,
this change moves the register's initial clear at bind time and only
clears the bits for a specific plane when disabling it or changing its
zpos.
This way, planes that are left untouched by a DRM atomic commit are
no longer disabled.
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Lyude Paul [Mon, 16 Jul 2018 15:44:32 +0000 (11:44 -0400)]
drm/dp_helper: Add DP aux channel tracing
This is something we've needed for a very long time now, as it makes
debugging issues with faulty MST hubs along with debugging issues
regarding us interfacing with hubs correctly vastly easier to debug.
Currently this can actually be done if you trace the i2c devices for DP
using ftrace but that's significantly less useful for a couple of
reasons:
- Tracing the i2c devices through ftrace means all of the traces are
going to contain a lot of "garbage" output that we're sending over the
i2c line. Most of this garbage comes from retrying transactions, DRM's
helper library adding extra transactions to work around bad hubs, etc.
- Having a user set up ftrace so that they can provide debugging
information is a lot more difficult then being able to say "just boot
with drm.debug=0x100"
- We can potentially expand upon this tracing in the future to print
debugging information in regards to other DP transactions like MST
sideband transactions
This is inspired by a patch Rob Clark sent to do this a long time back.
Neither of us could find the patch however, so we both assumed it would
probably just be easier to rewrite it anyway.
drm: writeback: Fix doc that says connector should be disconnected
During iteration process one of the proposed mechanism for not
breaking existing userspace was to report writeback connectors as
disconnected, however the final version used
DRM_CLIENT_CAP_WRITEBACK_CONNECTORS for that purpose.
Change-Id: I2319d099f7669094c8530f1521abdbca08e76486 Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/238399/
Michel Dänzer [Wed, 4 Jul 2018 15:14:05 +0000 (17:14 +0200)]
dma-buf: Move BUG_ON from _add_shared_fence to _add_shared_inplace
Fixes the BUG_ON spuriously triggering under the following
circumstances:
* reservation_object_reserve_shared is called with shared_count ==
shared_max - 1, so obj->staged is freed in preparation of an in-place
update.
* reservation_object_add_shared_fence is called with the first fence,
after which shared_count == shared_max.
* reservation_object_add_shared_fence is called with a follow-up fence
from the same context.
In the second reservation_object_add_shared_fence call, the BUG_ON
triggers. However, nothing bad would happen in
reservation_object_add_shared_inplace, since both fences are from the
same context, so they only occupy a single slot.
Prevent this by moving the BUG_ON to where an overflow would actually
happen (e.g. if a buggy caller didn't call
reservation_object_reserve_shared before).
Neil Armstrong [Mon, 16 Jul 2018 07:40:14 +0000 (09:40 +0200)]
drm/meson: Make DMT timings parameters and pixel clock generic
Remove the modes timings tables for DMT modes and calculate the HW
paremeters from the modes timings.
Switch the DMT modes pixel clock calculation out of the static frequency
list to a generic calculation from a range of possible PLL dividers.
This patch is an intermediate step towards usage of the Common Clock
Framwework for PLL setup, by reworking the code to have common
sel_pll() function called by the CEA (HDMI) freq setup and the generic
DMT frequencies setup, we should be able to simply call clk_set_rate()
on the PLL clock handle in a near future.
The CEA (HDMI) and CVBS modes needs very specific clock paths that CCF will
never be able to determine by itself, so there is still some work to do for
a full handoff to CCF handling the clocks.
Thierry Reding [Wed, 30 May 2018 14:06:25 +0000 (16:06 +0200)]
drm/nouveau: tegra: Detach from ARM DMA/IOMMU mapping
Depending on the kernel configuration, early ARM architecture setup code
may have attached the GPU to a DMA/IOMMU mapping that transparently uses
the IOMMU to back the DMA API. Tegra requires special handling for IOMMU
backed buffers (a special bit in the GPU's MMU page tables indicates the
memory path to take: via the SMMU or directly to the memory controller).
Transparently backing DMA memory with an IOMMU prevents Nouveau from
properly handling such memory accesses and causes memory access faults.
As a side-note: buffers other than those allocated in instance memory
don't need to be physically contiguous from the GPU's perspective since
the GPU can map them into contiguous buffers using its own MMU. Mapping
these buffers through the IOMMU is unnecessary and will even lead to
performance degradation because of the additional translation. One
exception to this are compressible buffers which need large pages. In
order to enable these large pages, multiple small pages will have to be
combined into one large (I/O virtually contiguous) mapping via the
IOMMU. However, that is a topic outside the scope of this fix and isn't
currently supported. An implementation will want to explicitly create
these large pages in the Nouveau driver, so detaching from a DMA/IOMMU
mapping would still be required.
Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Thierry Reding [Wed, 30 May 2018 14:06:24 +0000 (16:06 +0200)]
ARM: dma-mapping: Set proper DMA ops in arm_iommu_detach_device()
Instead of setting the DMA ops pointer to NULL, set the correct,
non-IOMMU ops depending on the device's coherency setting.
Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Kees Cook [Thu, 24 May 2018 17:24:36 +0000 (10:24 -0700)]
drm/nouveau/secboot/acr: Remove VLA usage
In the quest to remove all stack VLA usage from the kernel[1], this
allocates the working buffers before starting the writing so it won't
abort in the middle. This needs an initial walk of the lists to figure
out how large the buffer should be.
drm/nouveau: Replace drm_dev_unref with drm_dev_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
drm/nouveau: Replace drm_gem_object_unreference_unlocked with put function
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
drm/nouveau: Replace drm_framebuffer_{un/reference} with put, get functions
This patch unifies the naming of DRM functions for reference counting
of struct drm_framebuffer. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Lyude Paul [Thu, 12 Jul 2018 17:02:52 +0000 (13:02 -0400)]
drm/nouveau: Fix runtime PM leak in drm_open()
Noticed this as I was skimming through, if we fail to allocate memory
for cli we'll end up returning without dropping the runtime PM ref we
got. Additionally, we'll even return the wrong return code! (ret most
likely will == 0 here, we want -ENOMEM).
Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
With instantaneous high precision vblank timestamping
that updates at leading edge of vblank, the emulated
"hw vblank counter" from vblank timestamping, which
increments at leading edge of vblank, and reliable
page flip execution and completion at leading edge of
vblank, we should meet the requirements for fast/
immediate vblank irq disable/enable.
This is only allowed on nv50+ gpu's, ie. the ones with
atomic modesetting. One requirement for immediate vblank
disable is that high precision vblank timestamping works
reliably all the time on all connectors. This is not the
case on all pre-nv50 parts for analog VGA outputs, where we
currently don't always have support for scanout position
queries and therefore fall back to vblank interrupt
timestamping. The implementation in nv04_head_state() does
not return valid values for vblanks, vtotal, hblanks, htotal
for VGA outputs on all cards, but those are needed for scanout
position queries.
Testing on Linux-4.12-rc5 + drm-next on a GeForce 9500 GT
(NV G96) with timing measurement equipment indicates this
works fine, so allow immediate vblank disable for power
saving.
For debugging in case of unexpected trouble, booting
with kernel cmdline option drm.vblankoffdelay=0
(or echo 0 > /sys/module/drm/parameters/vblankoffdelay)
would keep vblank irqs permanently on to approximate old
behavior.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Daniel Vetter [Mon, 9 Jul 2018 08:40:10 +0000 (10:40 +0200)]
drm: switch drm_plane to inline comments
And use that opportunity to polish the kernel doc all around:
- Beef up some of the documentation.
- Intro text for drm_plane and better links
- Fix all the hyperlinks!
Daniel Vetter [Mon, 9 Jul 2018 08:40:09 +0000 (10:40 +0200)]
drm: Switch drm_plane_state to inline kerneldoc style
For consistency and to encourage more detailed documentation. While
doing this also beefed up a few of the comments, linking at least to
the setup function. Plus fixed all the hyperlinks.
Daniel Vetter [Mon, 9 Jul 2018 08:40:08 +0000 (10:40 +0200)]
drm: drop _mode_ from remaining connector functions
Since there's very few callers of these I've decided to do them all in
one patch. With this the unecessarily long drm_mode_connector_ prefix
is gone from the codebase! The only exception being struct
drm_mode_connector_set_property, which is part of the uapi so can't be
renamed.
Again done with sed+some manual fixups for indent issues.
Daniel Vetter [Mon, 9 Jul 2018 08:40:06 +0000 (10:40 +0200)]
drm: drop _mode_ from update_edit_property()
Just makes it longer, and for most things in drm_connector.[hc] we
just use the drm_connector_ prefix. Done with sed + a bit of manual
fixup for the indenting.
Daniel Vetter [Mon, 9 Jul 2018 08:40:05 +0000 (10:40 +0200)]
drm/doc: polish for sturct drm_connector
- switch everything over to inline comments
- add notes about locking, links to functions and other related stuff
- also include a note about Ville's soon-to-be-merged
drm_connector_for_each_possible_encoder().
Also check that all the hyperlinks in drm_connector.h work and fix
them as needed.
drm/arm/malidp: Add modifier definitions for describing Arm Framebuffer Compression (AFBC).
AFBC is a proprietary lossless image compression protocol and format.
It provides fine-grained random access and minimizes the amount of data
transferred between IP blocks.
AFBC has several features which may be supported and/or used, which are
represented using bits in the modifier. Not all combinations are valid,
and different devices or use-cases may support different combinations.
Changes from v2:-
- Added ack by Maarten Lankhorst
Signed-off-by: Rosen Zhelev <rosen.zhelev@arm.com> Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Brian Starkey <brian.starkey@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: James (Qian) Wang <james.qian.wang@arm.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://lkml.org/lkml/2018/7/10/360
Ville Syrjälä [Thu, 5 Jul 2018 19:00:10 +0000 (22:00 +0300)]
drm: Skip __drm_mode_set_config_internal() on atomic drivers
Everything (apart from the actual ->set_config() call)
__drm_mode_set_config_internal() does is now useless on
atomic drivers. So let's just skip all the foreplay.
Ville Syrjälä [Thu, 5 Jul 2018 18:59:07 +0000 (21:59 +0300)]
drm: Introduce __setplane_atomic()
All the plane->fb/old_fb/crtc dance of __setplane_internal() is
pointless on atomic drivers. So let's just introduce a simpler
version that skips all that.
Ideally we could also skip the __setplane_check() as
drm_atomic_plane_check() already checks for everything, but the
legacy cursor/"async" .update_plane() tricks bypass that so
we still need to call __setplane_check(). Toss in a FIXME to
remind someone to clean this up later.
Hans Verkuil [Wed, 11 Jul 2018 13:29:07 +0000 (15:29 +0200)]
drm: add support for DisplayPort CEC-Tunneling-over-AUX
This adds support for the DisplayPort CEC-Tunneling-over-AUX
feature that is part of the DisplayPort 1.3 standard.
Unfortunately, not all DisplayPort/USB-C to HDMI adapters with a
chip that has this capability actually hook up the CEC pin, so
even though a CEC device is created, it may not actually work.
drivers/gpu/drm/drm_client.c:289 drm_client_buffer_create()
error: double free of 'buffer'
Extend drm_client_buffer_delete() to handle the case when there's no
dumb buffer attached and drop the extra kfree.
Fixes: c76f0f7cb546 ("drm: Begin an API for in-kernel clients") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180712150414.46908-1-noralf@tronnes.org
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Maxime Ripard [Thu, 12 Jul 2018 08:08:18 +0000 (10:08 +0200)]
drm/sun4i: tcon-top: Fix return type warning
When commit af11942ee44e ("drm/sun4i: tcon-top: Cleanup clock handling")
was merged, the error handling path of the of_property_match_string was
changed to take into account the fact that the returned value of that
function wasn't an error pointer but an error code.
Unfortunately, this introduced a warning since the now returned value is an
integer, while the sun8i_tcon_top_register_gate function should return an
error pointer.
Fix that by calling ERR_PTR.
Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Chen-Yu Tsai <wens@csie.org> Fixes: af11942ee44e ("drm/sun4i: tcon-top: Cleanup clock handling") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712080818.3571-1-maxime.ripard@bootlin.com
Initial implementation of DE2 planes only supported fixed zpos.
Expand implementation with configurable zpos property.
Implementation background:
Channel in DE2 driver represents one DRM plane, whereas pipe is just
mapped channel to known Z position. Pipe 0 will always be at the bottom,
pipe 1 just above pipe 0 and so on. If, for example, channel 1 is mapped
at pipe 0 and channel 0 at pipe 1, whatever is on channel 0 will appear
on top.
Before this commit, channel id was used for addressing channel related
registers (prefixed with SUN8I_MIXER_CHAN_UI_ or SUN8I_MIXER_CHAN_VI_)
and pipe registers (prefixed with SUN8I_MIXER_BLEND_). Additionally,
register SUN8I_MIXER_BLEND_ROUTE, which takes care for mapping channels
to pipes had fixed value. It mapped channel 0 to pipe 0, 1 to 1 and so
on. Consequence of all that was fixed Z order of planes.
With this commit, pipe registers are using zpos property as index and
channel related registers still use channel id as index. Pipe mapping
register is now set dynamically too and pipe enable register is rebuild
every time to make sure only active pipes are enabled.
Testing was done to confirm that there is no issues if bottom plane
contains pixels with alpha value < 0xff and if it doesn't whole screen.
This patch appends the minimum helpers related to framebuffer and plane
to make vkms minimally usable.
Changes since V1:
- None
Changes since V2:
- Squash "Add plane helper struct" and "Add helper for framebuffer
create"
Changes since V3:
Daniel Vetter:
- Remove atomic_check from plane helper
drm/sun4i: fix build failure with CONFIG_DRM_SUN8I_MIXER=m
Having DRM_SUN4I built-in but DRM_SUN8I_MIXER as a loadable module results in
a link error, as we try to access a symbol from the sun8i_tcon_top.ko module:
This solves the problem by adding a silent symbol for the tcon_top module,
building it as a separate module in exactly the cases that we need it,
but in a way that it is reachable by the other modules.
Fixes: 57e23de02f48 ("drm/sun4i: DW HDMI: Expand algorithm for possible crtcs") Fixes: ef0cf6441fbb ("drm/sun4i: Add support for traversing graph with TCON TOP") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180711144403.1022829-1-arnd@arndb.de
Currently, TCON supports 2 ways to match TCON with engine (mixer in this
case). Old way is to just traverse of graph backwards and compare node
pointer. New way is to match TCON and engine by their respective ids.
All SoCs with DE2 enabled till now used the old way, which means mixer
id was never used and thus never implemented.
However, for R40, only the new way will be used. To prepare for that,
implement mixer id fetching from DT.
This commit adds regular vblank events simulated through hrtimers, which
is a feature required by VKMS to mimic real hardware. Additionally, all
the vblank event send after pageflip is kept in the atomic_flush
function.
Changes since V1:
- Compute the vblank timer interval per interruption
Ville Syrjälä and Daniel Vetter:
- Removes hardcoded vblank interval to get it from user space
Changes since V2:
Chris Wilson
- Removes unnecessary algorithm to compute the next period
Daniel Vetter:
- Uses drm_calc_timestamping_constants to get the vblank interval
instead of calculating it manually
- Adds disable_vblank helper that turns of crtc
- Simplifies implementation by using drm_crtc_arm_vblank_event
- Replaces the code in atomic_begin to atomic_flush
- Removes unnecessary field in vkms_output
Changes since V3:
Daniel Vetter:
- Squash "drm/vkms: Add atomic helpers functions" into the commit that
handling vblank events simulated by hrtimers
VKMS currently does not handle dumb data, and as a consequence, it does
not provide mechanisms for handling gem. This commit adds the necessary
support for gem object/handler and the dumb functions.
Changes since V1:
Daniel Vetter:
- Add dumb buffer support to the same patchset
Changes since V2:
Haneen:
- Add missing gem_free_object_unlocked callback to fix the warning
"Memory manager not clean during takedown"
include/drm/tinydrm/tinydrm.h:34: warning: Function parameter or member 'fb_dirty' not described in 'tinydrm_device'
drivers/gpu/drm/tinydrm/mipi-dbi.c:272: warning: Function parameter or member 'crtc_state' not described in 'mipi_dbi_enable_flush'
drivers/gpu/drm/tinydrm/mipi-dbi.c:272: warning: Function parameter or member 'plane_state' not described in 'mipi_dbi_enable_flush'
Move struct member docs inline so it's not missed next time.
drm/panel: simple: Add Sharp LQ035Q7DB03 panel support
The change adds support for Sharp LQ035Q7DB03 3.5" QVGA TFT panel.
Note that this aged panel is already found in the kernel sources,
for instance in board mach files mach-mx21ads.c, mach-mx27ads.c,
mach-pcm043.c, lpd270.c and imx27-phytec-phycore-rdk.dts.
drm/sun4i: DW HDMI: Release nodes if error happens during CRTC search
If error happens in sun8i_dw_hdmi_find_possible_crtcs(), nodes are not
released with of_node_put() before returning.
Fix that by calling of_node_put() when necessary. While on it, clean up
the code by using of_graph_get_remote_node() which also lowers number of
cases where error handling has to be performed.
dt-bindings: display: sun4i-drm: Add R40 TV TCON description
TCON description is expanded with R40 TV TCON compatible. It is a bit
special, because it is connected to TCON TOP instead directly to mixer
and it needs special handling.
Dan Carpenter [Wed, 4 Jul 2018 09:38:09 +0000 (12:38 +0300)]
drm/panel: type promotion bug in s6e8aa0_read_mtp_id()
The ARRAY_SIZE() macro is type size_t. If s6e8aa0_dcs_read() returns a
negative error code, then "ret < ARRAY_SIZE(id)" is false because the
negative error code is type promoted to a high positive value.
Nickey Yang [Mon, 2 Jul 2018 10:32:27 +0000 (12:32 +0200)]
dt-bindings: Add vendor prefix for kingdisplay
Kingdisplay Technology Co., Ltd, established in
China Shenzhen in 2006, is a national high-tech
enterprise specializing in the R&D, manufacturing
and marketing of TFT-LCM and touch panel.
When panel power down, p079zca need delay between reset and disable
power supply, but p097pfg does not need it. Similarly p097zca needs
a delay after entering panel sleep mode. So add two delay properties,
so we can meet these two panel power down sequence.
Lin Huang [Mon, 2 Jul 2018 10:27:18 +0000 (12:27 +0200)]
drm/panel: p079zca: Refactor panel driver to support multiple panels
Refactor Innolux P079ZCA panel driver, let it support multi panels from
Innolux that share similar power sequences.
Panels may require different power supplies so use regulator bulk
interfaces and define per panel supply-names.
Changes in v2:
- Change regulator property name to meet the panel datasheet
Changes in v3:
- this patch only refactor P079ZCA panel to support multi panel,
support P097PFG panel in another patch
Changes in v4:
- Modify the patch which suggest by Thierry
Changes in v5:
- use regulator_bulk to handle different supply number
Colin Ian King [Tue, 26 Jun 2018 16:03:54 +0000 (17:03 +0100)]
drm/panel: ili9881c: Fix missing assignment to error return ret
Currently, ret is being checked for an error condition however it
is not being assigned in the previous statement on the call of
function mipi_dsi_dcs_exit_sleep_mode. Add in the missing assignment
of ret.
Detected by CoverityScan, CID#1470174, 1470178 ("Unchecked return value")
Michal Vokáč [Mon, 25 Jun 2018 12:41:30 +0000 (14:41 +0200)]
drm/panel: simple: Add support for DataImage SCF0700C48GGU18
This adds support for the DataImage SCF0700C48GGU18 7.0" WVGA (800x480)
TFT LCD panel. The panel has 24-bit parallel interface and can be
supported by the simple panel driver.