net: ip6_gre: fix possible use-after-free in ip6erspan_rcv
erspan_v6 tunnels run __iptunnel_pull_header on received skbs to remove
erspan header. This can determine a possible use-after-free accessing
pkt_md pointer in ip6erspan_rcv since the packet will be 'uncloned'
running pskb_expand_head if it is a cloned gso skb (e.g if the packet has
been sent though a veth device). Fix it resetting pkt_md pointer after
__iptunnel_pull_header
Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ip_gre: fix possible use-after-free in erspan_rcv
erspan tunnels run __iptunnel_pull_header on received skbs to remove
gre and erspan headers. This can determine a possible use-after-free
accessing pkt_md pointer in erspan_rcv since the packet will be 'uncloned'
running pskb_expand_head if it is a cloned gso skb (e.g if the packet has
been sent though a veth device). Fix it resetting pkt_md pointer after
__iptunnel_pull_header
Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
There's a significant number of reports that re-enabling ASPM causes
different issues, ranging from decreased performance to system not
booting at all. This affects only a minority of users, but the number
of affected users is big enough that we better switch off ASPM again.
This will hurt notebook users who are not affected by the issues, they
may see decreased battery runtime w/o ASPM. With the PCI core folks is
being discussed to add generic sysfs attributes to control ASPM.
Once this is in place brave enough users can re-enable ASPM on their
system.
Fixes: a99790bf5c7f ("r8169: Reinstate ASPM Support") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When moving the documentation for the ieee802154 subsystem from
plain text to rst the file pattern in the MAINTAINERS file got wrong.
Updating it here to fix scripts using this file.
Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Miaohe Lin [Mon, 8 Apr 2019 02:04:20 +0000 (10:04 +0800)]
net: vrf: Fix ping failed when vrf mtu is set to 0
When the mtu of a vrf device is set to 0, it would cause ping
failed. So I think we should limit vrf mtu in a reasonable range
to solve this problem. I set dev->min_mtu to IPV6_MIN_MTU, so it
will works for both ipv4 and ipv6. And if dev->max_mtu still be 0
can be confusing, so I set dev->max_mtu to ETH_MAX_MTU.
Here is the reproduce step:
1.Config vrf interface and set mtu to 0:
3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
master vrf1 state UP mode DEFAULT group default qlen 1000
link/ether 52:54:00:9e:dd:c1 brd ff:ff:ff:ff:ff:ff
2.Ping peer:
3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
master vrf1 state UP group default qlen 1000
link/ether 52:54:00:9e:dd:c1 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.1/16 scope global enp4s0
valid_lft forever preferred_lft forever
connect: Network is unreachable
3.Set mtu to default value, ping works:
PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data.
64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=1.88 ms
Fixes: ad49bc6361ca2 ("net: vrf: remove MTU limits for vrf device") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 3 Apr 2019 07:13:51 +0000 (10:13 +0300)]
nfc: nci: Potential off by one in ->pipes[] array
This is similar to commit e285d5bfb7e9 ("NFC: Fix the number of pipes")
where we changed NFC_HCI_MAX_PIPES from 127 to 128.
As the comment next to the define explains, the pipe identifier is 7
bits long. The highest possible pipe is 127, but the number of possible
pipes is 128. As the code is now, then there is potential for an
out of bounds array access:
net/nfc/nci/hci.c:297 nci_hci_cmd_received() warn: array off by one?
'ndev->hci_dev->pipes[pipe]' '0-127 == 127'
Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 3 Apr 2019 07:12:48 +0000 (10:12 +0300)]
NFC: nci: Add some bounds checking in nci_hci_cmd_received()
This is similar to commit 674d9de02aa7 ("NFC: Fix possible memory
corruption when handling SHDLC I-Frame commands").
I'm not totally sure, but I think that commit description may have
overstated the danger. I was under the impression that this data came
from the firmware? If you can't trust your networking firmware, then
you're already in trouble.
Anyway, these days we add bounds checking where ever we can and we call
it kernel hardening. Better safe than sorry.
Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'mm-compaction-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux
Pull mm/compaction fixes from Mel Gorman:
"The merge window for 5.1 introduced a number of compaction-related
patches. with intermittent reports of corruption and functional
issues. The bugs are due to sloopy checking of zone boundaries and a
corner case where invalid indexes are used to access the free lists.
Reports are not common but at least two users and 0-day have tripped
over them. There is a chance that one of the syzbot reports are
related but it has not been confirmed properly.
The normal submission path is with Andrew but there have been some
delays and I consider them urgent enough that they should be picked up
before RC4 to avoid duplicate reports.
All of these have been successfully tested on older RC windows. This
will make this branch look like a rebase but in fact, they've simply
been lifted again from Andrew's tree and placed on a fresh branch.
I've no reason to believe that this has invalidated the testing given
the lack of change in compaction and the nature of the fixes"
* tag 'mm-compaction-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux:
mm/compaction.c: abort search if isolation fails
mm/compaction.c: correct zone boundary handling when resetting pageblock skip hints
The n_r3964 line discipline driver was written in a different time, when
SMP machines were rare, and users were trusted to do the right thing.
Since then, the world has moved on but not this code, it has stayed
rooted in the past with its lovely hand-crafted list structures and
loads of "interesting" race conditions all over the place.
After attempting to clean up most of the issues, I just gave up and am
now marking the driver as BROKEN so that hopefully someone who has this
hardware will show up out of the woodwork (I know you are out there!)
and will help with debugging a raft of changes that I had laying around
for the code, but was too afraid to commit as odds are they would break
things.
Many thanks to Jann and Linus for pointing out the initial problems in
this codebase, as well as many reviews of my attempts to fix the issues.
It was a case of whack-a-mole, and as you can see, the mole won.
Merge tag 'drm-fixes-2019-04-05' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Pretty quiet week, just some amdgpu and i915 fixes.
i915:
- deadlock fix
- gvt fixes
amdgpu:
- PCIE dpm feature fix
- Powerplay fixes"
* tag 'drm-fixes-2019-04-05' of git://anongit.freedesktop.org/drm/drm:
drm/i915/gvt: Fix kerneldoc typo for intel_vgpu_emulate_hotplug
drm/i915/gvt: Correct the calculation of plane size
drm/amdgpu: remove unnecessary rlc reset function on gfx9
drm/i915: Always backoff after a drm_modeset_lock() deadlock
drm/i915/gvt: do not let pin count of shadow mm go negative
drm/i915/gvt: do not deliver a workload if its creation fails
drm/amd/display: VBIOS can't be light up HDMI when restart system
drm/amd/powerplay: fix possible hang with 3+ 4K monitors
drm/amd/powerplay: correct data type to avoid overflow
drm/amd/powerplay: add ECC feature bit
drm/amd/amdgpu: fix PCIe dpm feature issue (v3)
1) Several hash table refcount fixes in batman-adv, from Sven
Eckelmann.
2) Use after free in bpf_evict_inode(), from Daniel Borkmann.
3) Fix mdio bus registration in ixgbe, from Ivan Vecera.
4) Unbounded loop in __skb_try_recv_datagram(), from Paolo Abeni.
5) ila rhashtable corruption fix from Herbert Xu.
6) Don't allow upper-devices to be added to vrf devices, from Sabrina
Dubroca.
7) Add qmi_wwan device ID for Olicard 600, from Bjørn Mork.
8) Don't leave skb->next poisoned in __netif_receive_skb_list_ptype,
from Alexander Lobakin.
9) Missing IDR checks in mlx5 driver, from Aditya Pakki.
10) Fix false connection termination in ktls, from Jakub Kicinski.
11) Work around some ASPM issues with r8169 by disabling rx interrupt
coalescing on certain chips. From Heiner Kallweit.
12) Properly use per-cpu qstat values on NOLOCK qdiscs, from Paolo
Abeni.
13) Fully initialize sockaddr_in structures in SCTP, from Xin Long.
14) Various BPF flow dissector fixes from Stanislav Fomichev.
15) Divide by zero in act_sample, from Davide Caratti.
16) Fix bridging multicast regression introduced by rhashtable
conversion, from Nikolay Aleksandrov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
ibmvnic: Fix completion structure initialization
ipv6: sit: reset ip header pointer in ipip6_rcv
net: bridge: always clear mcast matching struct on reports and leaves
libcxgb: fix incorrect ppmax calculation
vlan: conditional inclusion of FCoE hooks to match netdevice.h and bnx2x
sch_cake: Make sure we can write the IP header before changing DSCP bits
sch_cake: Use tc_skb_protocol() helper for getting packet protocol
tcp: Ensure DCTCP reacts to losses
net/sched: act_sample: fix divide by zero in the traffic path
net: thunderx: fix NULL pointer dereference in nicvf_open/nicvf_stop
net: hns: Fix sparse: some warnings in HNS drivers
net: hns: Fix WARNING when remove HNS driver with SMMU enabled
net: hns: fix ICMP6 neighbor solicitation messages discard problem
net: hns: Fix probabilistic memory overwrite when HNS driver initialized
net: hns: Use NAPI_POLL_WEIGHT for hns driver
net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()
flow_dissector: rst'ify documentation
ipv6: Fix dangling pointer when ipv6 fragment
net-gro: Fix GRO flush when receiving a GSO packet.
flow_dissector: document BPF flow dissector environment
...
Thomas Falcon [Thu, 4 Apr 2019 23:58:26 +0000 (18:58 -0500)]
ibmvnic: Fix completion structure initialization
Fix device initialization completion handling for vNIC adapters.
Initialize the completion structure on probe and reinitialize when needed.
This also fixes a race condition during kdump where the driver can attempt
to access the completion struct before it is initialized:
ipip6 tunnels run iptunnel_pull_header on received skbs. This can
determine the following use-after-free accessing iph pointer since
the packet will be 'uncloned' running pskb_expand_head if it is a
cloned gso skb (e.g if the packet has been sent though a veth device)
Fix it resetting iph pointer after iptunnel_pull_header
Fixes: a09a4c8dd1ec ("tunnels: Remove encapsulation offloads on decap") Tested-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'riscv-for-linus-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V fixes from Palmer Dabbelt:
"I dropped the ball a bit here: these patches should all probably have
been part of rc2, but I wanted to get around to properly testing them
in the various configurations (qemu32, qeum64, unleashed) first.
Unfortunately I've been traveling and didn't have time to actually do
that, but since these fix concrete bugs and pass my old set of tests I
don't want to delay the fixes any longer.
There are four independent fixes here:
- A fix for the rv32 port that corrects the 64-bit user accesor's
fixup label address.
- A fix for a regression introduced during the merge window that
broke medlow configurations at run time. This patch also includes a
fix that disables ftrace for the same set of functions, which was
found by inspection at the same time.
- A modification of the memory map to avoid overlapping the FIXMAP
and VMALLOC regions on systems with small memory maps.
- A fix to the module handling code to use the correct syntax for
probing Kconfig entries.
These have passed my standard test flow, but I didn't have time to
expand that testing like I said I would"
* tag 'riscv-for-linus-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: Use IS_ENABLED(CONFIG_CMODEL_MEDLOW)
RISC-V: Fix FIXMAP_TOP to avoid overlap with VMALLOC area
RISC-V: Always compile mm/init.c with cmodel=medany and notrace
riscv: fix accessing 8-byte variable from RV32
net: bridge: always clear mcast matching struct on reports and leaves
We need to be careful and always zero the whole br_ip struct when it is
used for matching since the rhashtable change. This patch fixes all the
places which didn't properly clear it which in turn might've caused
mismatches.
Thanks for the great bug report with reproducing steps and bisection.
Steps to reproduce (from the bug report):
ip link add br0 type bridge mcast_querier 1
ip link set br0 up
ip link add v2 type veth peer name v3
ip link set v2 master br0
ip link set v2 up
ip link set v3 up
ip addr add 3.0.0.2/24 dev v3
ip netns add test
ip link add v1 type veth peer name v1 netns test
ip link set v1 master br0
ip link set v1 up
ip -n test link set v1 up
ip -n test addr add 3.0.0.1/24 dev v1
# Multicast receiver
ip netns exec test socat
UDP4-RECVFROM:5588,ip-add-membership=224.224.224.224:3.0.0.1,fork -
Reported-by: liam.mcbirnie@boeing.com Fixes: 19e3a9c90c53 ("net: bridge: convert multicast to generic rhashtable") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'pm-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix up the intel_pstate driver after recent changes to prevent
it from printing pointless messages and update the turbostat utility
(mostly fixes and new hardware support).
Specifics:
- Make intel_pstate only load on Intel processors and prevent it from
printing pointless failure messages (Borislav Petkov).
- Update the turbostat utility:
* Assorted fixes (Ben Hutchings, Len Brown, Prarit Bhargava).
* Support for AMD Fam 17h (Zen) RAPL and package power (Calvin
Walton).
* Support for Intel Icelake and for systems with more than one die
per package (Len Brown).
* Cleanups (Len Brown)"
* tag 'pm-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/intel_pstate: Load only on Intel hardware
tools/power turbostat: update version number
tools/power turbostat: Warn on bad ACPI LPIT data
tools/power turbostat: Add checks for failure of fgets() and fscanf()
tools/power turbostat: Also read package power on AMD F17h (Zen)
tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL
tools/power turbostat: Do not display an error on systems without a cpufreq driver
tools/power turbostat: Add Die column
tools/power turbostat: Add Icelake support
tools/power turbostat: Cleanup CNL-specific code
tools/power turbostat: Cleanup CC3-skip code
tools/power turbostat: Restore ability to execute in topology-order
Dave Airlie [Fri, 5 Apr 2019 00:45:27 +0000 (10:45 +1000)]
Merge tag 'drm-intel-fixes-2019-04-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Only one fix for DSC (backoff after drm_modeset_lock deadlock)
and GVT's fixes including vGPU display plane size calculation,
shadow mm pin count, error recovery path for workload create
and one kerneldoc fix.
Merge tag 'mfd-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd fixes from Lee Jones:
- Fix failed reads due to enabled IRQs when suspended; twl-core
- Fix driver registration when using DT; sprd-sc27xx-spi
- Fix `make allyesconfig` on x86_64; SUN6I_PRCM
* tag 'mfd-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: sun6i-prcm: Allow to compile with COMPILE_TEST
mfd: sc27xx: Use SoC compatible string for PMIC devices
mfd: twl-core: Disable IRQ while suspended
Dave Airlie [Fri, 5 Apr 2019 00:42:08 +0000 (10:42 +1000)]
Merge branch 'drm-fixes-5.1' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Fixes for 5.1:
- Fix for pcie dpm
- Powerplay fixes for vega20
- Fix vbios display on reboot if driver display state is retained
- Gfx9 resume robustness fix
Chris Leech [Tue, 2 Apr 2019 22:06:12 +0000 (15:06 -0700)]
vlan: conditional inclusion of FCoE hooks to match netdevice.h and bnx2x
Way back in 3c9c36bcedd426f2be2826da43e5163de61735f7 the
ndo_fcoe_get_wwn pointer was switched from depending on CONFIG_FCOE to
CONFIG_LIBFCOE in order to allow building FCoE support into the bnx2x
driver and used by bnx2fc without including the generic software fcoe
module.
But, FCoE is generally used over an 802.1q VLAN, and the implementation
of ndo_fcoe_get_wwn in the 8021q module was not similarly changed. The
result is that if CONFIG_FCOE is disabled, then bnz2fc cannot make a
call to ndo_fcoe_get_wwn through the 8021q interface to the underlying
bnx2x interface. The bnx2fc driver then falls back to a potentially
different mapping of Ethernet MAC to Fibre Channel WWN, creating an
incompatibility with the fabric and target configurations when compared
to the WWNs used by pre-boot firmware and differently-configured
kernels.
So make the conditional inclusion of FCoE code in 8021q match the
conditional inclusion in netdevice.h
Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Batch of fixes to the existing BPF flow dissector API to support
calling BPF programs from the eth_get_headlen context (support for
latter is planned to be added in bpf-next), from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* pm-tools:
tools/power turbostat: update version number
tools/power turbostat: Warn on bad ACPI LPIT data
tools/power turbostat: Add checks for failure of fgets() and fscanf()
tools/power turbostat: Also read package power on AMD F17h (Zen)
tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL
tools/power turbostat: Do not display an error on systems without a cpufreq driver
tools/power turbostat: Add Die column
tools/power turbostat: Add Icelake support
tools/power turbostat: Cleanup CNL-specific code
tools/power turbostat: Cleanup CC3-skip code
tools/power turbostat: Restore ability to execute in topology-order
David S. Miller [Thu, 4 Apr 2019 17:55:59 +0000 (10:55 -0700)]
Merge branch 'sch_cake-fixes'
Toke Høiland-Jørgensen says:
====================
sched: A few small fixes for sch_cake
Kevin noticed a few issues with the way CAKE reads the skb protocol and the IP
diffserv fields. This series fixes those two issues, and should probably go to
in 4.19 as well. However, the previous refactoring patch means they don't apply
as-is; I can send a follow-up directly to stable if that's OK with you?
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
sch_cake: Make sure we can write the IP header before changing DSCP bits
There is not actually any guarantee that the IP headers are valid before we
access the DSCP bits of the packets. Fix this using the same approach taken
in sch_dsmark.
Reported-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
sch_cake: Use tc_skb_protocol() helper for getting packet protocol
We shouldn't be using skb->protocol directly as that will miss cases with
hardware-accelerated VLAN tags. Use the helper instead to get the right
protocol number.
Reported-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
RFC8257 §3.5 explicitly states that "A DCTCP sender MUST react to
loss episodes in the same way as conventional TCP".
Currently, Linux DCTCP performs no cwnd reduction when losses
are encountered. Optionally, the dctcp_clamp_alpha_on_loss resets
alpha to its maximal value if a RTO happens. This behavior
is sub-optimal for at least two reasons: i) it ignores losses
triggering fast retransmissions; and ii) it causes unnecessary large
cwnd reduction in the future if the loss was isolated as it resets
the historical term of DCTCP's alpha EWMA to its maximal value (i.e.,
denoting a total congestion). The second reason has an especially
noticeable effect when using DCTCP in high BDP environments, where
alpha normally stays at low values.
This patch replace the clamping of alpha by setting ssthresh to
half of cwnd for both fast retransmissions and RTOs, at most once
per RTT. Consequently, the dctcp_clamp_alpha_on_loss module parameter
has been removed.
The table below shows experimental results where we measured the
drop probability of a PIE AQM (not applying ECN marks) at a
bottleneck in the presence of a single TCP flow with either the
alpha-clamping option enabled or the cwnd halving proposed by this
patch. Results using reno or cubic are given for comparison.
We see that, without halving its cwnd for all source of losses,
DCTCP drives the AQM to large drop probabilities in order to keep
the queue length under control (i.e., it repeatedly faces RTOs).
Instead, if DCTCP reacts to all source of losses, it can then be
controlled by the AQM using similar drop levels than cubic or reno.
Signed-off-by: Koen De Schepper <koen.de_schepper@nokia-bell-labs.com> Signed-off-by: Olivier Tilmans <olivier.tilmans@nokia-bell-labs.com> Cc: Bob Briscoe <research@bobbriscoe.net> Cc: Lawrence Brakmo <brakmo@fb.com> Cc: Florian Westphal <fw@strlen.de> Cc: Daniel Borkmann <borkmann@iogearbox.net> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Andrew Shewmaker <agshew@gmail.com> Cc: Glenn Judd <glenn.judd@morganstanley.com> Acked-by: Florian Westphal <fw@strlen.de> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
net/sched: act_sample: fix divide by zero in the traffic path
the control path of 'sample' action does not validate the value of 'rate'
provided by the user, but then it uses it as divisor in the traffic path.
Validate it in tcf_sample_init(), and return -EINVAL with a proper extack
message in case that value is zero, to fix a splat with the script below:
# tc f a dev test0 egress matchall action sample rate 0 group 1 index 2
# tc -s a s action sample
total acts 1
action order 0: sample rate 1/0 group 1 pipe
index 2 ref 1 bind 1 installed 19 sec used 19 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
# ping 192.0.2.1 -I test0 -c1 -q
net: thunderx: fix NULL pointer dereference in nicvf_open/nicvf_stop
When a bpf program is uploaded, the driver computes the number of
xdp tx queues resulting in the allocation of additional qsets.
Starting from commit '2ecbe4f4a027 ("net: thunderx: replace global
nicvf_rx_mode_wq work queue for all VFs to private for each of them")'
the driver runs link state polling for each VF resulting in the
following NULL pointer dereference:
Fix it by checking nicvf_rx_mode_wq pointer in nicvf_open and nicvf_stop
Fixes: 2ecbe4f4a027 ("net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to private for each of them") Fixes: 2c632ad8bc74 ("net: thunderx: move link state polling function to VF") Reported-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Thu, 4 Apr 2019 08:46:47 +0000 (16:46 +0800)]
net: hns: Fix sparse: some warnings in HNS drivers
There are some sparse warnings in the HNS drivers:
warning: incorrect type in assignment (different address spaces)
expected void [noderef] <asn:2> *io_base
got void *vaddr
warning: cast removes address space '<asn:2>' of expression
[...]
Add __iomem and change all the u8 __iomem to void __iomem to
fix these kind of warnings.
warning: incorrect type in argument 1 (different address spaces)
expected void [noderef] <asn:2> *base
got unsigned char [usertype] *base_addr
warning: cast to restricted __le16
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype] tbl_tcam_data_high
got restricted __le32 [usertype]
warning: cast to restricted __le32
[...]
These variables used u32/u16 as their type, and finally as a
parameter of writel(), writel() will do the cpu_to_le32 coversion
so remove the little endian covert code to fix these kind of warnings.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The tx ring buffer map when xmit and unmap when xmit done. So in
hnae_init_ring() did not map tx ring buffer, but in hnae_fini_ring()
have a unmap operation for tx ring buffer, which is already unmapped
when xmit done, than cause this WARNING.
The hnae_alloc_buffers() is called in hnae_init_ring(),
so the hnae_free_buffers() should be in hnae_fini_ring(), not in
hnae_free_desc().
In hnae_fini_ring(), adds a check is_rx_ring() as in hnae_init_ring().
When the ring buffer is tx ring, adds a piece of code to ensure that
the tx ring is unmap.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Thu, 4 Apr 2019 08:46:45 +0000 (16:46 +0800)]
net: hns: fix ICMP6 neighbor solicitation messages discard problem
ICMP6 neighbor solicitation messages will be discard by the Hip06
chips, because of not setting forwarding pool. Enable promisc mode
has the same problem.
This patch fix the wrong forwarding table configs for the multicast
vague matching when enable promisc mode, and add forwarding pool
for the forwarding table.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Every time the call trace is not the same, but the overwrite address
is always the same:
Unable to handle kernel paging request at virtual address 0000000200000040
The root cause is, when write the reg XGMAC_MAC_TX_LF_RF_CONTROL_REG,
didn't use the io_base offset.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Thu, 4 Apr 2019 08:46:43 +0000 (16:46 +0800)]
net: hns: Use NAPI_POLL_WEIGHT for hns driver
When the HNS driver loaded, always have an error print:
"netif_napi_add() called with weight 256"
This is because the kernel checks the NAPI polling weights
requested by drivers and it prints an error message if a driver
requests a weight bigger than 64.
So use NAPI_POLL_WEIGHT to fix it.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Liubin Shu [Thu, 4 Apr 2019 08:46:42 +0000 (16:46 +0800)]
net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()
This patch is trying to fix the issue due to:
[27237.844750] BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x708/0xa18[hns_enet_drv]
After hnae_queue_xmit() in hns_nic_net_xmit_hw(), can be
interrupted by interruptions, and than call hns_nic_tx_poll_one()
to handle the new packets, and free the skb. So, when turn back to
hns_nic_net_xmit_hw(), calling skb->len will cause use-after-free.
This patch update tx ring statistics in hns_nic_tx_poll_one() to
fix the bug.
Signed-off-by: Liubin Shu <shuliubin@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Qian Cai [Thu, 4 Apr 2019 10:54:41 +0000 (11:54 +0100)]
mm/compaction.c: abort search if isolation fails
Running LTP oom01 in a tight loop or memory stress testing put the system
in a low-memory situation could triggers random memory corruption like
page flag corruption below due to in fast_isolate_freepages(), if
isolation fails, next_search_order() does not abort the search immediately
could lead to improper accesses.
Link: http://lkml.kernel.org/r/20190320192648.52499-1-cai@lca.pw Fixes: dbe2d4e4f12e ("mm, compaction: round-robin the order while searching the free lists for a target") Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
He bisected it down to e332f741a8dd ("mm, compaction: be selective about
what pageblocks to clear skip hints"). The problem is that the patch in
question was sloppy with respect to the handling of zone boundaries. In
some instances, it was possible for PFNs outside of a zone to be examined
and if those were not properly initialised or poisoned then it would
trigger the VM_BUG_ON. This patch corrects the zone boundary issues when
resetting pageblock skip hints and Mikhail reported that the bug did not
trigger after 30 hours of testing.
Link: http://lkml.kernel.org/r/20190327085424.GL3189@techsingularity.net Fixes: e332f741a8dd ("mm, compaction: be selective about what pageblocks to clear skip hints") Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Qian Cai <cai@lca.pw> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Merge tag '5.1-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb3 fixes from Steve French:
"Four smb3 fixes for stable:
- fix an open path where we had an unitialized structure
- fix for snapshot (previous version) enumeration
- allow reconnect timeout on handles to be configurable to better
handle network or server crash
- correctly handle lack of file_all_info structure"
* tag '5.1-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: a smb2_validate_and_copy_iov failure does not mean the handle is invalid.
SMB3: Allow persistent handle timeout to be configurable on mount
smb3: Fix enumerating snapshots to Azure
cifs: fix kref underflow in close_shroot()
Junwei Hu [Tue, 2 Apr 2019 11:38:04 +0000 (19:38 +0800)]
ipv6: Fix dangling pointer when ipv6 fragment
At the beginning of ip6_fragment func, the prevhdr pointer is
obtained in the ip6_find_1stfragopt func.
However, all the pointers pointing into skb header may change
when calling skb_checksum_help func with
skb->ip_summed = CHECKSUM_PARTIAL condition.
The prevhdr pointe will be dangling if it is not reloaded after
calling __skb_linearize func in skb_checksum_help func.
Here, I add a variable, nexthdr_offset, to evaluate the offset,
which does not changes even after calling __skb_linearize func.
Fixes: 405c92f7a541 ("ipv6: add defensive check for CHECKSUM_PARTIAL skbs in ip_fragment") Signed-off-by: Junwei Hu <hujunwei4@huawei.com> Reported-by: Wenhao Zhang <zhangwenhao8@huawei.com> Reported-by: syzbot+e8ce541d095e486074fc@syzkaller.appspotmail.com Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net-gro: Fix GRO flush when receiving a GSO packet.
Currently we may merge incorrectly a received GSO packet
or a packet with frag_list into a packet sitting in the
gro_hash list. skb_segment() may crash case because
the assumptions on the skb layout are not met.
The correct behaviour would be to flush the packet in the
gro_hash list and send the received GSO packet directly
afterwards. Commit d61d072e87c8e ("net-gro: avoid reorders")
sets NAPI_GRO_CB(skb)->flush in this case, but this is not
checked before merging. This patch makes sure to check this
flag and to not merge in that case.
Fixes: d61d072e87c8e ("net-gro: avoid reorders") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Wilson [Tue, 5 Feb 2019 20:30:33 +0000 (20:30 +0000)]
drm/i915/gvt: Fix kerneldoc typo for intel_vgpu_emulate_hotplug
drivers/gpu/drm/i915/gvt/display.c:457: warning: Function parameter or member 'connected' not described in 'intel_vgpu_emulate_hotplug'
drivers/gpu/drm/i915/gvt/display.c:457: warning: Excess function parameter 'conncted' description in 'intel_vgpu_emulate_hotplug'
Fixes: 1ca20f33df42 ("drm/i915/gvt: add hotplug emulation") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Hang Yuan <hang.yuan@linux.intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Xiong Zhang [Mon, 25 Mar 2019 08:29:19 +0000 (16:29 +0800)]
drm/i915/gvt: Correct the calculation of plane size
stride isn't in unit of pixel, it is bytes, so calculation of
plane size doesn't need to multiple bpp.
Fixes: e546e281d33d ("drm/i915/gvt: Dmabuf support for GVT-g") Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- build dependency fix for hid-asus from Arnd Bergmann
- addition of omitted mapping of _ASSISTANT key from Dmitry Torokhov
- race condition fix in hid-debug inftastructure from He, Bo
- fixed support for devices with big maximum report size from Kai-Heng
Feng
- deadlock fix in hid-steam from Rodrigo Rivas Costa
- quite a few device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: input: add mapping for Assistant key
HID: i2c-hid: Disable runtime PM on Synaptics touchpad
HID: quirks: Fix keyboard + touchpad on Lenovo Miix 630
HID: logitech: Handle 0 scroll events for the m560
HID: debug: fix race condition with between rdesc_show() and device removal
HID: logitech: check the return value of create_singlethread_workqueue
HID: Increase maximum report size allowed by hid_field_extract()
HID: steam: fix deadlock with input devices.
HID: uclogic: remove redudant duplicated null check on ver_ptr
HID: quirks: Drop misused kernel-doc annotation
HID: hid-asus: select CONFIG_POWER_SUPPLY
HID: quirks: use correct format chars in dbg_hid
Daniel Borkmann [Wed, 3 Apr 2019 14:49:49 +0000 (16:49 +0200)]
Merge branch 'bpf-flow-dissector-fixes'
Stanislav Fomichev says:
====================
This patch series fixes the existing BPF flow dissector API to
support calling BPF progs from the eth_get_headlen context (the
support itself will be added in bpf-next tree).
The summary of the changes:
* fix VLAN handling in bpf_flow.c, we don't need to peek back and look
at skb->vlan_present; add selftests
* pass and use flow_keys->n_proto instead of skb->protocol
* fix clamping of flow_keys->nhoff for packets with nhoff > 0
* prohibit access to most of the __sk_buff fields from BPF flow
dissector progs; only data/data_end/flow_keys are allowed (all input
is now passed via flow_keys)
* finally, document BPF flow dissector program environment
====================
Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Petar Penkov <peterpenkov96@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
flow_dissector: allow access only to a subset of __sk_buff fields
Use whitelist instead of a blacklist and allow only a small set of
fields that might be relevant in the context of flow dissector:
* data
* data_end
* flow_keys
This is required for the eth_get_headlen case where we have only a
chunk of data to dissect (i.e. trying to read the other skb fields
doesn't make sense).
Note, that it is a breaking API change! However, we've provided
flow_keys->n_proto as a substitute for skb->protocol; and there is
no need to manually handle skb->vlan_present. So even if we
break somebody, the migration is trivial. Unfortunately, we can't
support eth_get_headlen use-case without those breaking changes.
Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
flow_dissector: fix clamping of BPF flow_keys for non-zero nhoff
Don't allow BPF program to set flow_keys->nhoff to less than initial
value. We currently don't read the value afterwards in anything but
the tests, but it's still a good practice to return consistent
values to the test programs.
Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
selftests/bpf: fix vlan handling in flow dissector program
When we tail call PROG(VLAN) from parse_eth_proto we don't need to peek
back to handle vlan proto because we didn't adjust nhoff/thoff yet. Use
flow_keys->n_proto, that we set in parse_eth_proto instead and
properly increment nhoff as well.
Also, always use skb->protocol and don't look at skb->vlan_present.
skb->vlan_present indicates that vlan information is stored out-of-band
in skb->vlan_{tci,proto} and vlan header is already pulled from skb.
That means, skb->vlan_present == true is not relevant for BPF flow
dissector.
Add simple test cases with VLAN tagged frames:
* single vlan for ipv4
* double vlan for ipv6
Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Maxime Ripard [Fri, 22 Mar 2019 09:16:50 +0000 (10:16 +0100)]
mfd: sun6i-prcm: Allow to compile with COMPILE_TEST
Since this driver only has a dependency on ARCH_SUNXI just because it
doesn't make any sense to run it on something else, we can definitely
enable it through COMPILE_TEST as well to get some build coverage.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Merge tag 'pidfd-fixes-v5.1-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull pidfd fix from Christian Brauner:
"This should be an uncontroversial fix for pidfd_send_signal() by Jann
to better align it's behavior with other signal sending functions:
In one of the early versions of the patchset it was suggested to not
unconditionally error out when a signal with SI_USER is sent to a
non-current task (cf. [1]).
Instead, pidfd_send_signal() currently silently changes this to a
regular kill signal. While this is technically fine, the semantics are
weird since the kernel just silently converts a user's request behind
their back and also no other signal sending function allows to do
this. It gets more hairy when we introduce sending signals to a
specific thread soon.
So let's align pidfd_send_signal() with all the other signal sending
functions and error out when SI_USER signals are sent to a non-current
task"
* tag 'pidfd-fixes-v5.1-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
signal: don't silently convert SI_USER signals to non-current pidfd
Le Ma [Mon, 1 Apr 2019 10:08:30 +0000 (18:08 +0800)]
drm/amdgpu: remove unnecessary rlc reset function on gfx9
The rlc reset function is not necessary during gfx9 initialization/resume phase.
And this function would even cause rlc fw loading failed on some gfx9 ASIC.
Remove this function safely with verification well on Vega/Raven platform.
Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David S. Miller [Tue, 2 Apr 2019 20:27:11 +0000 (13:27 -0700)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Fixes 2019-04-01
This series contains two fixes for XDP in the i40e driver.
Björn provides both fixes, first moving a function out of the header and
into the main.c file. Second fixes a regression introduced in an
earlier patch that removed umem from the VSI. This caused an issue
because the setup code would try to enable AF_XDP zero copy
unconditionally, as long as there was a umem placed in the netdev
receive structure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The device type for ip6 tunnels is set to
ARPHRD_TUNNEL6. However, the ip4ip6_err function
is expecting the device type of the tunnel to be
ARPHRD_TUNNEL. Since the device types do not
match, the function exits and the ICMP error
packet is not sent to the originating host. Note
that the device type for IPv4 tunnels is set to
ARPHRD_TUNNEL.
Fix is to expect a tunnel device type of
ARPHRD_TUNNEL6 instead. Now the tunnel device
type matches and the ICMP error packet is sent
to the originating host.
Signed-off-by: Sheena Mira-ato <sheena.mira-ato@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Kemnade [Sat, 23 Feb 2019 11:47:54 +0000 (12:47 +0100)]
mfd: twl-core: Disable IRQ while suspended
Since commit 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
on gta04 we have handle_twl4030_pih() called in situations where pm_runtime_get()
in i2c-omap.c returns -EACCES.
This happens when we wakeup via something behing twl4030 (powerbutton or rtc
alarm). This goes on for minutes until the system is finally resumed.
Disable the irq on suspend and enable it on resume to avoid
having i2c access problems when the irq registers are checked.
Fixes: 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
If dccp_feat_push_change fails, we forget free the mem
which is alloced by kmemdup in dccp_feat_clone_sp_val.
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e8ef967a54f4 ("dccp: Registration routines for changing feature values") Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 31 Mar 2019 08:58:15 +0000 (16:58 +0800)]
sctp: initialize _pad of sockaddr_in before copying to user memory
Syzbot report a kernel-infoleak:
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
Call Trace:
_copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
copy_to_user include/linux/uaccess.h:174 [inline]
sctp_getsockopt_peer_addrs net/sctp/socket.c:5911 [inline]
sctp_getsockopt+0x1668e/0x17f70 net/sctp/socket.c:7562
...
Uninit was stored to memory at:
sctp_transport_init net/sctp/transport.c:61 [inline]
sctp_transport_new+0x16d/0x9a0 net/sctp/transport.c:115
sctp_assoc_add_peer+0x532/0x1f70 net/sctp/associola.c:637
sctp_process_param net/sctp/sm_make_chunk.c:2548 [inline]
sctp_process_init+0x1a1b/0x3ed0 net/sctp/sm_make_chunk.c:2361
...
Bytes 8-15 of 16 are uninitialized
It was caused by that th _pad field (the 8-15 bytes) of a v4 addr (saved in
struct sockaddr_in) wasn't initialized, but directly copied to user memory
in sctp_getsockopt_peer_addrs().
So fix it by calling memset(addr->v4.sin_zero, 0, 8) to initialize _pad of
sockaddr_in before copying it to user memory in sctp_v4_addr_to_user(), as
sctp_v6_addr_to_user() does.
Reported-by: syzbot+86b5c7c236a22616a72f@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Tested-by: Alexander Potapenko <glider@google.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
nfp: flower: fix matching and pushing vlan CFI bit
This patch clears up some confusion around the meaning of bit 12
for FW messages related to VLAN and flower offload.
Pieter says:
It fixes issues with matching, pushing and popping vlan tags.
We replace the vlan CFI bit with a vlan present bit that
indicates the presence of a vlan tag. We also no longer set
the CFI when pushing vlan tags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
nfp: flower: remove vlan CFI bit from push vlan action
We no longer set CFI when pushing vlan tags, therefore we remove
the CFI bit from push vlan.
Fixes: 1a1e586f54bf ("nfp: add basic action capabilities to flower offloads") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Replace vlan CFI bit with a vlan present bit that indicates the
presence of a vlan tag. Previously the driver incorrectly assumed
that an vlan id of 0 is not matchable, therefore we indicate vlan
presence with a vlan present bit.
Fixes: 5571e8c9f241 ("nfp: extend flower matching capabilities") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Slaby [Fri, 29 Mar 2019 11:19:46 +0000 (12:19 +0100)]
kcm: switch order of device registration to fix a crash
When kcm is loaded while many processes try to create a KCM socket, a
crash occurs:
BUG: unable to handle kernel NULL pointer dereference at 000000000000000e
IP: mutex_lock+0x27/0x40 kernel/locking/mutex.c:240
PGD 8000000016ef2067 P4D 8000000016ef2067 PUD 3d6e9067 PMD 0
Oops: 0002 [#1] SMP KASAN PTI
CPU: 0 PID: 7005 Comm: syz-executor.5 Not tainted 4.12.14-396-default #1 SLE15-SP1 (unreleased)
RIP: 0010:mutex_lock+0x27/0x40 kernel/locking/mutex.c:240
RSP: 0018:ffff88000d487a00 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 000000000000000e RCX: 1ffff100082b0719
...
CR2: 000000000000000e CR3: 000000004b1bc003 CR4: 0000000000060ef0
Call Trace:
kcm_create+0x600/0xbf0 [kcm]
__sock_create+0x324/0x750 net/socket.c:1272
...
This is due to race between sock_create and unfinished
register_pernet_device. kcm_create tries to do "net_generic(net,
kcm_net_id)". but kcm_net_id is not initialized yet.
So switch the order of the two to close the race.
This can be reproduced with mutiple processes doing socket(PF_KCM, ...)
and one process doing module removal.
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: sched: fix stats accounting for child NOLOCK qdiscs
Currently, stats accounting for NOLOCK qdisc enslaved to classful (lock)
qdiscs is buggy. Per CPU values are ignored in most places, as a result,
stats dump in the above scenario always report 0 length backlog and parent
backlog len is not updated correctly on NOLOCK qdisc removal.
The first patch address stats dumping, and the second one child qdisc removal.
I'm targeting the net tree as this is a bugfix, but it could be moved to
net-next due to the relatively large diffstat.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Thu, 28 Mar 2019 15:53:13 +0000 (16:53 +0100)]
net: sched: introduce and use qdisc tree flush/purge helpers
The same code to flush qdisc tree and purge the qdisc queue
is duplicated in many places and in most cases it does not
respect NOLOCK qdisc: the global backlog len is used and the
per CPU values are ignored.
This change addresses the above, factoring-out the relevant
code and using the helpers introduced by the previous patch
to fetch the correct backlog len.
Fixes: c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Thu, 28 Mar 2019 15:53:12 +0000 (16:53 +0100)]
net: sched: introduce and use qstats read helpers
Classful qdiscs can't access directly the child qdiscs backlog
length: if such qdisc is NOLOCK, per CPU values should be
accounted instead.
Most qdiscs no not respect the above. As a result, qstats fetching
for most classful qdisc is currently incorrect: if the child qdisc is
NOLOCK, it always reports 0 len backlog.
This change introduces a pair of helpers to safely fetch
both backlog and qlen and use them in stats class dumping
functions, fixing the above issue and cleaning a bit the code.
DRR needs also to access the child qdisc queue length, so it
needs custom handling.
Fixes: c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Thu, 28 Mar 2019 09:35:06 +0000 (10:35 +0100)]
net/sched: fix ->get helper of the matchall cls
It returned always NULL, thus it was never possible to get the filter.
Example:
$ ip link add foo type dummy
$ ip link add bar type dummy
$ tc qdisc add dev foo clsact
$ tc filter add dev foo protocol all pref 1 ingress handle 1234 \
matchall action mirred ingress mirror dev bar
Before the patch:
$ tc filter get dev foo protocol all pref 1 ingress handle 1234 matchall
Error: Specified filter handle not found.
We have an error talking to the kernel
After:
$ tc filter get dev foo protocol all pref 1 ingress handle 1234 matchall
filter ingress protocol all pref 1 matchall chain 0 handle 0x4d2
not_in_hw
action order 1: mirred (Ingress Mirror to device bar) pipe
index 1 ref 1 bind 1
CC: Yotam Gigi <yotamg@mellanox.com> CC: Jiri Pirko <jiri@mellanox.com> Fixes: fd62d9f5c575 ("net/sched: matchall: Fix configuration race") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jann Horn [Sat, 30 Mar 2019 02:12:32 +0000 (03:12 +0100)]
signal: don't silently convert SI_USER signals to non-current pidfd
The current sys_pidfd_send_signal() silently turns signals with explicit
SI_USER context that are sent to non-current tasks into signals with
kernel-generated siginfo.
This is unlike do_rt_sigqueueinfo(), which returns -EPERM in this case.
If a user actually wants to send a signal with kernel-provided siginfo,
they can do that with pidfd_send_signal(pidfd, sig, NULL, 0); so allowing
this case is unnecessary.
Instead of silently replacing the siginfo, just bail out with an error;
this is consistent with other interfaces and avoids special-casing behavior
based on security checks.
Ronnie Sahlberg [Sun, 31 Mar 2019 23:53:44 +0000 (09:53 +1000)]
cifs: a smb2_validate_and_copy_iov failure does not mean the handle is invalid.
It only means that we do not have a valid cached value for the
file_all_info structure.
CC: Stable <stable@vger.kernel.org> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Steve French [Fri, 29 Mar 2019 21:31:07 +0000 (16:31 -0500)]
SMB3: Allow persistent handle timeout to be configurable on mount
Reconnecting after server or network failure can be improved
(to maintain availability and protect data integrity) by allowing
the client to choose the default persistent (or resilient)
handle timeout in some use cases. Today we default to 0 which lets
the server pick the default timeout (usually 120 seconds) but this
can be problematic for some workloads. Add the new mount parameter
to cifs.ko for SMB3 mounts "handletimeout" which enables the user
to override the default handle timeout for persistent (mount
option "persistenthandles") or resilient handles (mount option
"resilienthandles"). Maximum allowed is 16 minutes (960000 ms).
Units for the timeout are expressed in milliseconds. See
section 2.2.14.2.12 and 2.2.31.3 of the MS-SMB2 protocol
specification for more information.
Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org>
Steve French [Fri, 29 Mar 2019 03:32:49 +0000 (22:32 -0500)]
smb3: Fix enumerating snapshots to Azure
Some servers (see MS-SMB2 protocol specification
section 3.3.5.15.1) expect that the FSCTL enumerate snapshots
is done twice, with the first query having EXACTLY the minimum
size response buffer requested (16 bytes) which refreshes
the snapshot list (otherwise that and subsequent queries get
an empty list returned). So had to add code to set
the maximum response size differently for the first snapshot
query (which gets the size needed for the second query which
contains the actual list of snapshots).
Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> # 4.19+
Ronnie Sahlberg [Thu, 28 Mar 2019 01:20:02 +0000 (11:20 +1000)]
cifs: fix kref underflow in close_shroot()
Fix a bug where we used to not initialize the cached fid structure at all
in open_shroot() if the open was successful but we did not get a lease.
This would leave the structure uninitialized and later when we close the handle
we would in close_shroot() try to kref_put() an uninitialized refcount.
Fix this by always initializing this structure if the open was successful
but only do the extra get() if we got a lease.
This extra get() is only used to hold the structure until we get a lease
break from the server at which point we will kref_put() it during lease
processing.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
Björn Töpel [Tue, 12 Feb 2019 08:52:05 +0000 (09:52 +0100)]
i40e: add tracking of AF_XDP ZC state for each queue pair
In commit f3fef2b6e1cc ("i40e: Remove umem from VSI") a regression was
introduced; When the VSI was reset, the setup code would try to enable
AF_XDP ZC unconditionally (as long as there was a umem placed in the
netdev._rx struct). Here, we add a bitmap to the VSI that tracks if a
certain queue pair has been "zero-copy enabled" via the ndo_bpf. The
bitmap is used in i40e_xsk_umem, and enables zero-copy if and only if
XDP is enabled, the corresponding qid in the bitmap is set and the
umem is non-NULL.
Fixes: f3fef2b6e1cc ("i40e: Remove umem from VSI") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Björn Töpel [Tue, 12 Feb 2019 08:52:04 +0000 (09:52 +0100)]
i40e: move i40e_xsk_umem function
The i40e_xsk_umem function was explicitly inlined in i40e.h. There is
no reason for that, so move it to i40e_main.c instead.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
vrf: check accept_source_route on the original netdevice
Configuration check to accept source route IP options should be made on
the incoming netdevice when the skb->dev is an l3mdev master. The route
lookup for the source route next hop also needs the incoming netdev.
v2->v3:
- Simplify by passing the original netdevice down the stack (per David
Ahern).
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Martin Habets <mhabets@solarflare.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Acked-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Wilson [Fri, 29 Mar 2019 16:51:52 +0000 (16:51 +0000)]
drm/i915: Always backoff after a drm_modeset_lock() deadlock
If drm_modeset_lock() reports a deadlock it sets the ctx->contexted
field and insists that the caller calls drm_modeset_backoff() or else it
generates a WARN on cleanup.
Dust Li [Mon, 1 Apr 2019 08:04:53 +0000 (16:04 +0800)]
tcp: fix a potential NULL pointer dereference in tcp_sk_exit
When tcp_sk_init() failed in inet_ctl_sock_create(),
'net->ipv4.tcp_congestion_control' will be left
uninitialized, but tcp_sk_exit() hasn't check for
that.
This patch add checking on 'net->ipv4.tcp_congestion_control'
in tcp_sk_exit() to prevent NULL-ptr dereference.
Fixes: 6670e1524477 ("tcp: Namespace-ify sysctl_tcp_default_congestion_control") Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull aio race fixes and cleanups from Al Viro.
The aio code had more issues with error handling and races with the aio
completing at just the right (wrong) time along with freeing the file
descriptor when another thread closes the file.
Just a couple of these commits are the actual fixes: the others are
cleanups to either make the fixes simpler, or to make the code legible
and understandable enough that we hope there's no more fundamental races
hiding.
* 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aio: move sanity checks and request allocation to io_submit_one()
deal with get_reqs_available() in aio_get_req() itself
aio: move dropping ->ki_eventfd into iocb_destroy()
make aio_read()/aio_write() return int
Fix aio_poll() races
aio: store event at final iocb_put()
aio: keep io_event in aio_kiocb
aio: fold lookup_kiocb() into its sole caller
pin iocb through aio.
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull symlink fixes from Al Viro:
"The ceph fix is already in mainline, Daniel's bpf fix is in bpf tree
(1da6c4d9140c "bpf: fix use after free in bpf_evict_inode"), the rest
is in here"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
debugfs: fix use-after-free on symlink traversal
ubifs: fix use-after-free on symlink traversal
jffs2: fix use-after-free on symlink traversal
Hui Wang [Fri, 29 Mar 2019 06:13:23 +0000 (14:13 +0800)]
HID: i2c-hid: Disable runtime PM on Synaptics touchpad
We have a new Dell laptop which has the synaptics I2C touchpad
(06cb:7e7e) on it. After booting up the Linux, the touchpad doesn't
work, there is no interrupt when touching the touchpad, after
disable the runtime PM, everything works well.
I also tried the quirk of I2C_HID_QUIRK_DELAY_AFTER_SLEEP, it is
better after applied this quirk, there are interrupts but data it
reports is invalid.
Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Al Viro [Tue, 26 Mar 2019 01:43:37 +0000 (01:43 +0000)]
debugfs: fix use-after-free on symlink traversal
symlink body shouldn't be freed without an RCU delay. Switch debugfs to
->destroy_inode() and use of call_rcu(); free both the inode and symlink
body in the callback. Similar to solution for bpf, only here it's even
more obvious that ->evict_inode() can be dropped.
Al Viro [Tue, 26 Mar 2019 01:40:38 +0000 (01:40 +0000)]
ubifs: fix use-after-free on symlink traversal
free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.
Al Viro [Tue, 26 Mar 2019 01:39:50 +0000 (01:39 +0000)]
jffs2: fix use-after-free on symlink traversal
free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.
Uninit was created at:
__alloc_skb+0x309/0xa20 net/core/skbuff.c:208
alloc_skb include/linux/skbuff.h:1012 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline]
netlink_sendmsg+0xb82/0x1300 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:622 [inline]
sock_sendmsg net/socket.c:632 [inline]
It was supposed to be fixed on commit 974cb0e3e7c9 ("tipc: fix uninit-value
in tipc_nl_compat_name_table_dump") by checking TLV_GET_DATA_LEN(msg->req)
in cmd->header()/tipc_nl_compat_name_table_dump_header(), which is called
ahead of tipc_nl_compat_name_table_dump().
However, tipc_nl_compat_dumpit() doesn't handle the error returned from cmd
header function. It means even when the check added in that fix fails, it
won't stop calling tipc_nl_compat_name_table_dump(), and the issue will be
triggered again.
So this patch is to add the process for the err returned from cmd header
function in tipc_nl_compat_dumpit().
Reported-by: syzbot+3ce8520484b0d4e260a5@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 31 Mar 2019 14:50:09 +0000 (22:50 +0800)]
tipc: check link name with right length in tipc_nl_compat_link_set
A similar issue as fixed by Patch "tipc: check bearer name with right
length in tipc_nl_compat_bearer_enable" was also found by syzbot in
tipc_nl_compat_link_set().
The length to check with should be 'TLV_GET_DATA_LEN(msg->req) -
offsetof(struct tipc_link_config, name)'.
Reported-by: syzbot+de00a87b8644a582ae79@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Uninit was created at:
__alloc_skb+0x309/0xa20 net/core/skbuff.c:208
alloc_skb include/linux/skbuff.h:1012 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline]
netlink_sendmsg+0xb82/0x1300 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:622 [inline]
sock_sendmsg net/socket.c:632 [inline]
It was triggered when the bearer name size < TIPC_MAX_BEARER_NAME,
it would check with a wrong len/TLV_GET_DATA_LEN(msg->req), which
also includes priority and disc_domain length.
This patch is to fix it by checking it with a right length:
'TLV_GET_DATA_LEN(msg->req) - offsetof(struct tipc_bearer_config, name)'.
Reported-by: syzbot+8b707430713eb46e1e45@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: stmmac: fix handling of oversized frames
I accidentally had MTU size mismatch (9000 vs. 1500) in my network,
and I noticed I could kill a system using stmmac & 1500 MTU simply
by pinging it with "ping -s 2000 ...".
While testing a fix I encountered also some other issues that need fixing.
I have tested these only with enhanced descriptors, so the normal
descriptor changes need a careful review.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / mirror_ubuntu-eoan-kernel.git / log