Linus Torvalds [Tue, 25 Aug 2020 18:59:23 +0000 (11:59 -0700)]
Merge tag 'm68knommu-for-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu fix from Greg Ungerer:
"Only a single fix for the binfmt_flat loader (reverting a recent
change)"
* tag 'm68knommu-for-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
binfmt_flat: revert "binfmt_flat: don't offset the data start"
Linus Torvalds [Tue, 25 Aug 2020 18:42:43 +0000 (11:42 -0700)]
Merge tag 'libnvdimm-fix-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Vishal Verma:
"A couple of minor fixes for things merged in 5.9-rc1.
One is an out-of-bounds access caught by KASAN, and the second is a
tweak to some overzealous logging about dax support even for
traditional block devices which was unnecessary"
* tag 'libnvdimm-fix-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: do not print error message for non-persistent memory block device
libnvdimm: KASAN: global-out-of-bounds Read in internal_create_group
Linus Torvalds [Tue, 25 Aug 2020 18:13:29 +0000 (11:13 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- regression fix / revert of a commit that intended to reduce probing
delay by ~50ms, but introduced a race that causes quite a few devices
not to enumerate, or get stuck on first IRQ
- buffer overflow fix in hiddev, from Peilin Ye
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
Revert "HID: usbhid: do not sleep when opening device"
HID: hiddev: Fix slab-out-of-bounds write in hiddev_ioctl_usage()
HID: quirks: Always poll three more Lenovo PixArt mice
HID: i2c-hid: Always sleep 60ms after I2C_HID_PWR_ON commands
HID: macally: Constify macally_id_table
HID: cougar: Constify cougar_id_table
$ make -skj"$(nproc)" ARCH=powerpc CROSS_COMPILE=powerpc64le-linux- distclean powernv_defconfig zImage
...
In file included from arch/powerpc/boot/../../../lib/decompress_unxz.c:234,
from arch/powerpc/boot/decompress.c:38:
arch/powerpc/boot/../../../lib/xz/xz_dec_stream.c: In function 'dec_main':
arch/powerpc/boot/../../../lib/xz/xz_dec_stream.c:586:4: error: 'fallthrough' undeclared (first use in this function)
586 | fallthrough;
| ^~~~~~~~~~~
This will end up affecting distribution configurations such as Debian
and OpenSUSE according to my testing. I am not sure what the solution
is, the PowerPC wrapper does not set -D__KERNEL__ so I am not sure
that compiler_attributes.h can be safely included."
In order to avoid these sort of problems, it seems that the best
solution is to use /* fall through */ comments instead of the
fallthrough pseudo-keyword macro in lib/, for now.
Reported-by: Nathan Chancellor <natechancellor@gmail.com> Fixes: df561f6688fe ("treewide: Use fallthrough pseudo-keyword") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-and-tested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 24 Aug 2020 19:01:20 +0000 (12:01 -0700)]
Merge tag 'for-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix swapfile activation on subvolumes with deleted snapshots
- error value mixup when removing directory entries from tree log
- fix lzo compression level reset after previous level setting
- fix space cache memory leak after transaction abort
- fix const function attribute
- more error handling improvements
* tag 'for-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: detect nocow for swap after snapshot delete
btrfs: check the right error variable in btrfs_del_dir_entries_in_log
btrfs: fix space cache memory leak after transaction abort
btrfs: use the correct const function attribute for btrfs_get_num_csums
btrfs: reset compression level for lzo on remount
btrfs: handle errors from async submission
Linus Torvalds [Mon, 24 Aug 2020 18:53:15 +0000 (11:53 -0700)]
Merge tag 'io_uring-5.9-2020-08-23' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Sagi:
- nvme completion rework from Christoph and Chao that mostly came
from a bit of divergence of how we classify errors related to
pathing/retry etc.
- nvmet passthru fixes from Chaitanya
- minor nvmet fixes from Amit and I
- mpath round-robin path selection fix from Martin
- ignore noiob for zoned devices from Keith
- minor nvme-fc fix from Tianjia"
- BFQ cgroup leak fix (Dmitry)
- block layer MAINTAINERS addition (Geert)
- fix null_blk FUA checking (Hou)
- get_max_io_size() size fix (Keith)
- fix block page_is_mergeable() for compound pages (Matthew)
- discard granularity fixes (Ming)
- IO scheduler ordering fix (Ming)
- misc fixes
* tag 'io_uring-5.9-2020-08-23' of git://git.kernel.dk/linux-block: (31 commits)
null_blk: fix passing of REQ_FUA flag in null_handle_rq
nvmet: Disable keep-alive timer when kato is cleared to 0h
nvme: redirect commands on dying queue
nvme: just check the status code type in nvme_is_path_error
nvme: refactor command completion
nvme: rename and document nvme_end_request
nvme: skip noiob for zoned devices
nvme-pci: fix PRP pool size
nvme-pci: Use u32 for nvme_dev.q_depth and nvme_queue.q_depth
nvme: Use spin_lock_irq() when taking the ctrl->lock
nvmet: call blk_mq_free_request() directly
nvmet: fix oops in pt cmd execution
nvmet: add ns tear down label for pt-cmd handling
nvme: multipath: round-robin: eliminate "fallback" variable
nvme: multipath: round-robin: fix single non-optimized path case
nvme-fc: Fix wrong return value in __nvme_fc_init_request()
nvmet-passthru: Reject commands with non-sgl flags set
nvmet: fix a memory leak
blkcg: fix memleak for iolatency
MAINTAINERS: Add missing header files to BLOCK LAYER section
...
Linus Torvalds [Mon, 24 Aug 2020 18:30:52 +0000 (11:30 -0700)]
Merge tag 'fallthrough-pseudo-keyword-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull 'fallthrough' keyword conversion from Gustavo A. R. Silva:
"A tree-wide patch that replaces tons (2484) of /* fall through */
comments, and its variants, with the new pseudo-keyword macro
fallthrough[1]. Also, remove unnecessary fall-through markings when it
is the case.
There are currently 1167 intances of this fallthrough pseudo-keyword
macro in mainline (5.9-rc2), that have been introduced over the last
couple of development cycles:
$ git grep -nw 'fallthrough;' | wc -l
1167
The global adoption of the fallthrough pseudo-keyword is something
certain to happen; so, better sooner than later. :) This will also
save everybody's time and thousands of lines of unnecessarily
repetitive changelog text.
After applying this patch on top of 5.9-rc2, we'll have a total of
3651 instances of this macro:
$ git grep -nw 'fallthrough;' | wc -l
3651
This treewide patch doesn't address ALL fall-through markings in all
subsystems at once because I have previously sent out patches for some
of such subsystems separately, and I will follow up on them; however,
this definitely contributes most of the work needed to replace all the
fall-through markings with the fallthrough pseudo-keyword macro in the
whole codebase.
I have build-tested this patch on 10 different architectures: x86_64,
i386, arm64, powerpc, s390, sparc64, sh, m68k, powerpc64 and alpha
(allyesconfig for all of them). This is in linux-next already and
kernel test robot has also helped me to successfully build-test early
versions of this patch[2][3][4][5]"
Max Filippov [Sat, 8 Aug 2020 18:37:13 +0000 (11:37 -0700)]
binfmt_flat: revert "binfmt_flat: don't offset the data start"
binfmt_flat loader uses the gap between text and data to store data
segment pointers for the libraries. Even in the absence of shared
libraries it stores at least one pointer to the executable's own data
segment. Text and data can go back to back in the flat binary image and
without offsetting data segment last few instructions in the text
segment may get corrupted by the data segment pointer.
Fix it by reverting commit a2357223c50a ("binfmt_flat: don't offset the
data start").
Cc: stable@vger.kernel.org Fixes: a2357223c50a ("binfmt_flat: don't offset the data start") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
Linus Torvalds [Sun, 23 Aug 2020 18:37:23 +0000 (11:37 -0700)]
Merge tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Add perf support for emitting extended registers for power10.
- A fix for CPU hotplug on pseries, where on large/loaded systems we
may not wait long enough for the CPU to be offlined, leading to
crashes.
- Addition of a raw cputable entry for Power10, which is not required
to boot, but is required to make our PMU setup work correctly in
guests.
- Three fixes for the recent changes on 32-bit Book3S to move modules
into their own segment for strict RWX.
- A fix for a recent change in our powernv PCI code that could lead to
crashes.
- A change to our perf interrupt accounting to avoid soft lockups when
using some events, found by syzkaller.
- A change in the way we handle power loss events from the hypervisor
on pseries. We no longer immediately shut down if we're told we're
running on a UPS.
- A few other minor fixes.
Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T
Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz,
Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth,
Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann,
Vaidyanathan Srinivasan, Vasant Hegde.
* tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000
powerpc/pseries: Do not initiate shutdown when system is running on UPS
powerpc/perf: Fix soft lockups due to missed interrupt accounting
powerpc/powernv/pci: Fix possible crash when releasing DMA resources
powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death
powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined
powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32
powerpc/fixmap: Fix the size of the early debug area
powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled
powerpc/kernel: Cleanup machine check function declarations
powerpc: Add POWER10 raw mode cputable entry
powerpc/perf: Add extended regs support for power10 platform
powerpc/perf: Add support for outputting extended regs in perf intr_regs
powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
Linus Torvalds [Sun, 23 Aug 2020 18:21:16 +0000 (11:21 -0700)]
Merge tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for x86 which removes the RDPID usage from the paranoid
entry path and unconditionally uses LSL to retrieve the CPU number.
RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid
expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values
and restores them either when leaving the run loop, on preemption or
when going out to user space. MSR_TSX_AUX is part of that lazy MSR
set, so after writing the guest value and before the lazy restore any
exception using the paranoid entry will read the guest value and use
it as CPU number to retrieve the GSBASE value for the current CPU when
FSGSBASE is enabled. As RDPID is only used in that particular entry
path, there is no reason to burden VMENTER/EXIT with two extra MSR
writes. Remove the RDPID optimization, which is not even backed by
numbers from the paranoid entry path instead"
* tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
Linus Torvalds [Sun, 23 Aug 2020 18:15:14 +0000 (11:15 -0700)]
Merge tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Thomas Gleixner:
"A single update for perf on x86 which has support for the broken down
bandwith counters"
* tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown
Linus Torvalds [Sun, 23 Aug 2020 18:05:47 +0000 (11:05 -0700)]
Merge tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull entry fix from Thomas Gleixner:
"A single bug fix for the common entry code.
The transcription of the x86 version messed up the reload of the
syscall number from pt_regs after ptrace and seccomp which breaks
syscall number rewriting"
* tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
core/entry: Respect syscall number rewrites
Linus Torvalds [Sun, 23 Aug 2020 17:57:19 +0000 (10:57 -0700)]
Merge tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
"A single fix correcting a reversed error severity determination check
which lead to a recoverable error getting marked as fatal, by Tony
Luck"
* tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/{i7core,sb,pnd2,skx}: Fix error event severity
Pull networking fixes from David Miller:
"Nothing earth shattering here, lots of small fixes (f.e. missing RCU
protection, bad ref counting, missing memset(), etc.) all over the
place:
1) Use get_file_rcu() in task_file iterator, from Yonghong Song.
2) There are two ways to set remote source MAC addresses in macvlan
driver, but only one of which validates things properly. Fix this.
From Alvin Šipraga.
3) Missing of_node_put() in gianfar probing, from Sumera
Priyadarsini.
4) Preserve device wanted feature bits across multiple netlink
ethtool requests, from Maxim Mikityanskiy.
5) Fix rcu_sched stall in task and task_file bpf iterators, from
Yonghong Song.
6) Avoid reset after device destroy in ena driver, from Shay
Agroskin.
7) Missing memset() in netlink policy export reallocation path, from
Johannes Berg.
8) Fix info leak in __smc_diag_dump(), from Peilin Ye.
9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark
Tomlinson.
10) Fix number of data stream negotiation in SCTP, from David Laight.
11) Fix double free in connection tracker action module, from Alaa
Hleihel.
12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: nexthop: don't allow empty NHA_GROUP
bpf: Fix two typos in uapi/linux/bpf.h
net: dsa: b53: check for timeout
tipc: call rcu_read_lock() in tipc_aead_encrypt_done()
net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow
net: sctp: Fix negotiation of the number of data streams.
dt-bindings: net: renesas, ether: Improve schema validation
gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY
hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()
hv_netvsc: Remove "unlikely" from netvsc_select_queue
bpf: selftests: global_funcs: Check err_str before strstr
bpf: xdp: Fix XDP mode when no mode flags specified
selftests/bpf: Remove test_align leftovers
tools/resolve_btfids: Fix sections with wrong alignment
net/smc: Prevent kernel-infoleak in __smc_diag_dump()
sfc: fix build warnings on 32-bit
net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified"
libbpf: Fix map index used in error message
net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()
net: atlantic: Use readx_poll_timeout() for large timeout
...
Linus Torvalds [Sun, 23 Aug 2020 00:11:38 +0000 (17:11 -0700)]
Merge branch 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull epoll fixes from Al Viro:
"Fix reference counting and clean up exit paths"
* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_epoll_ctl(): clean the failure exits up a bit
epoll: Keep a reference on files added to the check list
Marc Zyngier [Wed, 19 Aug 2020 16:12:17 +0000 (17:12 +0100)]
epoll: Keep a reference on files added to the check list
When adding a new fd to an epoll, and that this new fd is an
epoll fd itself, we recursively scan the fds attached to it
to detect cycles, and add non-epool files to a "check list"
that gets subsequently parsed.
However, this check list isn't completely safe when deletions
can happen concurrently. To sidestep the issue, make sure that
a struct file placed on the check list sees its f_count increased,
ensuring that a concurrent deletion won't result in the file
disapearing from under our feet.
Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently the nexthop code will use an empty NHA_GROUP attribute, but it
requires at least 1 entry in order to function properly. Otherwise we
end up derefencing null or random pointers all over the place due to not
having any nh_grp_entry members allocated, nexthop code relies on having at
least the first member present. Empty NHA_GROUP doesn't make any sense so
just disallow it.
Also add a WARN_ON for any future users of nexthop_create_group().
CC: David Ahern <dsahern@gmail.com> Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Reported-by: syzbot+a61aa19b0c14c8770bd9@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 22 Aug 2020 17:22:44 +0000 (10:22 -0700)]
Merge tag 'kbuild-fixes-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- move -Wsign-compare warning from W=2 to W=3
- fix the keyword _restrict to __restrict in genksyms
- fix more bugs in qconf
* tag 'kbuild-fixes-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: qconf: replace deprecated QString::sprintf() with QTextStream
kconfig: qconf: remove redundant help in the info view
kconfig: qconf: remove qInfo() to get back Qt4 support
kconfig: qconf: remove unused colNr
kconfig: qconf: fix the popup menu in the ConfigInfoView window
kconfig: qconf: fix signal connection to invalid slots
genksyms: keywords: Use __restrict not _restrict
kbuild: remove redundant patterns in filter/filter-out
extract-cert: add static to local data
Makefile.extrawarn: Move sign-compare from W=2 to W=3
Linus Torvalds [Sat, 22 Aug 2020 17:17:36 +0000 (10:17 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Allow booting of late secondary CPUs affected by erratum 1418040
(currently they are parked if none of the early CPUs are affected by
this erratum).
- Add the 32-bit vdso Makefile to the vdso_install rule so that 'make
vdso_install' installs the 32-bit compat vdso when it is compiled.
- Print a warning that untrusted guests without a CPU erratum
workaround (Cortex-A57 832075) may deadlock the affected system.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ARM64: vdso32: Install vdso32 from vdso_install
KVM: arm64: Print warning when cpu erratum can cause guests to deadlock
arm64: Allow booting of late CPUs affected by erratum 1418040
arm64: Move handling of erratum 1418040 into C code
Linus Torvalds [Sat, 22 Aug 2020 17:03:05 +0000 (10:03 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- PAE and PKU bugfixes for x86
- selftests fix for new binutils
- MMU notifier fix for arm64
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
KVM: x86: fix access code passed to gva_to_gpa
selftests: kvm: Use a shorter encoding to clear RAX
Linus Torvalds [Sat, 22 Aug 2020 16:56:42 +0000 (09:56 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"23 fixes in 5 drivers (qla2xxx, ufs, scsi_debug, fcoe, zfcp). The bulk
of the changes are in qla2xxx and ufs and all are mostly small and
definitely don't impact the core"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"
Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command"
scsi: qla2xxx: Fix null pointer access during disconnect from subsystem
scsi: qla2xxx: Check if FW supports MQ before enabling
scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hba
scsi: qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime
scsi: qla2xxx: Reduce noisy debug message
scsi: qla2xxx: Fix login timeout
scsi: qla2xxx: Indicate correct supported speeds for Mezz card
scsi: qla2xxx: Flush I/O on zone disable
scsi: qla2xxx: Flush all sessions on zone disable
scsi: qla2xxx: Use MBX_TOV_SECONDS for mailbox command timeout values
scsi: scsi_debug: Fix scp is NULL errors
scsi: zfcp: Fix use-after-free in request timeout handlers
scsi: ufs: No need to send Abort Task if the task in DB was cleared
scsi: ufs: Clean up completed request without interrupt notification
scsi: ufs: Improve interrupt handling for shared interrupts
scsi: ufs: Fix interrupt error message for shared interrupts
scsi: ufs-pci: Add quirk for broken auto-hibernate for Intel EHL
scsi: ufs-mediatek: Fix incorrect time to wait link status
...
Linus Torvalds [Sat, 22 Aug 2020 16:31:11 +0000 (09:31 -0700)]
Merge tag 'devicetree-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"Another set of DT fixes:
- restore range parsing error check
- workaround PCI range parsing with missing 'device_type' now
required
- correct description of 'phy-connection-type'
- fix erroneous matching on 'snps,dw-pcie' by 'intel,lgm-pcie' schema
- a couple of grammar and whitespace fixes
- update Shawn Guo's email"
* tag 'devicetree-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: vendor-prefixes: Remove trailing whitespace
dt-bindings: net: correct description of phy-connection-type
dt-bindings: PCI: intel,lgm-pcie: Fix matching on all snps,dw-pcie instances
of: address: Work around missing device_type property in pcie nodes
dt: writing-schema: Miscellaneous grammar fixes
dt-bindings: Use Shawn Guo's preferred e-mail for i.MX bindings
of/address: check for invalid range.cpu_addr
nvme: just check the status code type in nvme_is_path_error
Check the SCT sub-field for a path related status instead of enumerating
invididual status code. As of NVMe 1.4 this adds "Internal Path Error"
and "Controller Pathing Error" to the list, but it also future proofs for
additional status codes added to the category.
Suggested-by: Chao Leng <lengchao@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lift all the code to decide the dispostition of a completed command
from nvme_complete_rq and nvme_failover_req into a new helper, which
returns an emum of the potential actions. nvme_complete_rq then
just switches on those and calls the proper helper for the action.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_end_request is a bit misnamed, as it wraps around the
blk_mq_complete_* API. It's semantics also are non-trivial, so give it
a more descriptive name and add a comment explaining the semantics.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Fri, 7 Aug 2020 16:32:35 +0000 (09:32 -0700)]
nvme: skip noiob for zoned devices
Zoned block devices reuse the chunk_sectors queue limit to define zone
boundaries. If a such a device happens to also report an optimal
boundary, do not use that to define the chunk_sectors as that may
intermittently interfere with io splitting and zone size queries.
All operations are based on the controller, not the host page size.
Switch the dma pool to use the controller page size as well to avoid
massive overallocations on large page size systems.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
John Garry [Fri, 14 Aug 2020 15:34:25 +0000 (23:34 +0800)]
nvme-pci: Use u32 for nvme_dev.q_depth and nvme_queue.q_depth
Recently nvme_dev.q_depth was changed from an int to u16 type.
This falls over for the queue depth calculation in nvme_pci_enable(),
where NVME_CAP_MQES(dev->ctrl.cap) + 1 may overflow as a u16, as
NVME_CAP_MQES() is a 16b number also. That happens for me, and this is the
result:
Also use u32 for nvme_dev.q_depth, as we assign this value from
nvme_dev.q_depth, and nvme_dev.q_depth will possibly hold 65536 - this
avoids the same crash as above.
Fixes: 61f3b8963097 ("nvme-pci: use unsigned for io queue depth") Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Wed, 12 Aug 2020 23:24:44 +0000 (17:24 -0600)]
nvme: Use spin_lock_irq() when taking the ctrl->lock
When locking the ctrl->lock spinlock IRQs need to be disabled to avoid a
dead lock. The new spin_lock() calls recently added produce the
following lockdep warning when running the blktest nvme/003:
================================
WARNING: inconsistent lock state
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
ksoftirqd/2/22 [HC0[0]:SC1[1]:HE0:SE0] takes: ffff888276a8c4c0 (&ctrl->lock){+.?.}-{2:2}, at: nvme_keep_alive_end_io+0x50/0xc0
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0x164/0x500
_raw_spin_lock+0x28/0x40
nvme_get_effects_log+0x37/0x1c0
nvme_init_identify+0x9e4/0x14f0
nvme_reset_work+0xadd/0x2360
process_one_work+0x66b/0xb70
worker_thread+0x6e/0x6c0
kthread+0x1e7/0x210
ret_from_fork+0x22/0x30
irq event stamp: 1449221
hardirqs last enabled at (1449220): [<ffffffff81c58e69>] ktime_get+0xf9/0x140
hardirqs last disabled at (1449221): [<ffffffff83129665>] _raw_spin_lock_irqsave+0x25/0x60
softirqs last enabled at (1449210): [<ffffffff83400447>] __do_softirq+0x447/0x595
softirqs last disabled at (1449215): [<ffffffff81b489b5>] run_ksoftirqd+0x35/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
Instead of calling blk_put_request() which calls blk_mq_free_request(),
call blk_mq_free_request() directly for NVMeOF passthru. This is to
mainly avoid an extra function call in the completion path
nvmet_passthru_req_done().
In the existing NVMeOF Passthru core command handling on failure of
nvme_alloc_request() it errors out with rq value set to NULL. In the
error handling path it calls blk_put_request() without checking if
rq is set to NULL or not which produces following Oops:-
We fix this Oops by adding a new goto label out_put_req and reordering
the blk_put_request call to avoid calling blk_put_request() with rq
value is set to NULL. Here we also update the rest of the code
accordingly.
In the current implementation before submitting the passthru cmd we
may come across error e.g. getting ns from passthru controller,
allocating a request from passthru controller, etc. For all the failure
cases it only uses single goto label fail_out.
In the target code, we follow the pattern to have a separate label for
each error out the case when setting up multiple things before the actual
action.
This patch follows the same pattern and renames generic fail_out label
to out_put_ns and updates the error out cases in the
nvmet_passthru_execute_cmd() where it is needed.
Martin Wilck [Thu, 6 Aug 2020 13:19:31 +0000 (15:19 +0200)]
nvme: multipath: round-robin: fix single non-optimized path case
If there's only one usable, non-optimized path, nvme_round_robin_path()
returns NULL, which is wrong. Fix it by falling back to "old", like in
the single optimized path case. Also, if the active path isn't changed,
there's no need to re-assign the pointer.
Fixes: 3f6e3246db0e ("nvme-multipath: fix logic for non-optimized paths") Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin George <marting@netapp.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yufen Yu [Tue, 11 Aug 2020 02:21:16 +0000 (22:21 -0400)]
blkcg: fix memleak for iolatency
Normally, blkcg_iolatency_exit() will free related memory in iolatency
when cleanup queue. But if blk_throtl_init() return error and queue init
fail, blkcg_iolatency_exit() will not do that for us. Then it cause
memory leak.
MAINTAINERS: Add missing header files to BLOCK LAYER section
The various <linux/blk*.h> header files are part of the Block Layer.
Add them to the corresponding section in the MAINTAINERS file, so
scripts/get_maintainer.pl will pick them up.
Keith Busch [Thu, 6 Aug 2020 21:58:37 +0000 (14:58 -0700)]
block: fix get_max_io_size()
A previous commit aligning splits to physical block sizes inadvertently
modified one return case such that that it now returns 0 length splits
when the number of sectors doesn't exceed the physical offset. This
later hits a BUG in bio_split(). Restore the previous working behavior.
Fixes: 9cc5169cd478b ("block: Improve physical block alignment of split bios") Reported-by: Eric Deal <eric.deal@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Cc: Bart Van Assche <bvanassche@acm.org> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Tue, 18 Aug 2020 09:07:28 +0000 (17:07 +0800)]
blk-mq: insert request not through ->queue_rq into sw/scheduler queue
c616cbee97ae ("blk-mq: punt failed direct issue to dispatch list") supposed
to add request which has been through ->queue_rq() to the hw queue dispatch
list, however it adds request running out of budget or driver tag to hw queue
too. This way basically bypasses request merge, and causes too many request
dispatched to LLD, and system% is unnecessary increased.
Fixes this issue by adding request not through ->queue_rq into sw/scheduler
queue, and this way is safe because no ->queue_rq is called on this request
yet.
High %system can be observed on Azure storvsc device, and even soft lock
is observed. This patch reduces %system during heavy sequential IO,
meantime decreases soft lockup risk.
Fixes: c616cbee97ae ("blk-mq: punt failed direct issue to dispatch list") Signed-off-by: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
block/rnbd: Ensure err is always initialized in process_rdma
Clang warns:
drivers/block/rnbd/rnbd-srv.c:150:6: warning: variable 'err' is used
uninitialized whenever 'if' condition is true
[-Wsometimes-uninitialized]
if (IS_ERR(bio)) {
^~~~~~~~~~~
drivers/block/rnbd/rnbd-srv.c:177:9: note: uninitialized use occurs here
return err;
^~~
drivers/block/rnbd/rnbd-srv.c:150:2: note: remove the 'if' if its
condition is always false
if (IS_ERR(bio)) {
^~~~~~~~~~~~~~~~~~
drivers/block/rnbd/rnbd-srv.c:126:9: note: initialize the variable 'err'
to silence this warning
int err;
^
= 0
1 warning generated.
err is indeed uninitialized when this statement is taken. Ensure that it
is assigned the error value of bio before jumping to the error handling
label.
Will Deacon [Tue, 11 Aug 2020 10:27:25 +0000 (11:27 +0100)]
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
When an MMU notifier call results in unmapping a range that spans multiple
PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary,
since this avoids running into RCU stalls during VM teardown. Unfortunately,
if the VM is destroyed as a result of OOM, then blocking is not permitted
and the call to the scheduler triggers the following BUG():
Will Deacon [Tue, 11 Aug 2020 10:27:24 +0000 (11:27 +0100)]
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.
Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.
Cc: <stable@vger.kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-2-will@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Fri, 21 Aug 2020 21:59:16 +0000 (14:59 -0700)]
Merge tag 'io_uring-5.9-2020-08-21' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Make sure the head link cancelation includes async work
- Get rid of kiocb_wait_page_queue_init(), makes no sense to have it as
a separate function since you moved it into io_uring itself
- io_import_iovec cleanups (Pavel, me)
- Use system_unbound_wq for ring exit work, to avoid spawning tons of
these if we have tons of rings exiting at the same time
- Fix req->flags overflow flag manipulation (Pavel)
* tag 'io_uring-5.9-2020-08-21' of git://git.kernel.dk/linux-block:
io_uring: kill extra iovec=NULL in import_iovec()
io_uring: comment on kfree(iovec) checks
io_uring: fix racy req->flags modification
io_uring: use system_unbound_wq for ring exit work
io_uring: cleanup io_import_iovec() of pre-mapped request
io_uring: get rid of kiocb_wait_page_queue_init()
io_uring: find and cancel head link async work on files exit
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, page_alloc: fix core hung in free_pcppages_bulk()
mm: include CMA pages in lowmem_reserve at boot
squashfs: avoid bio_alloc() failure with 1Mbyte blocks
uprobes: __replace_page() avoid BUG in munlock_vma_page()
kernel/relay.c: fix memleak on destroy relay channel
romfs: fix uninitialized memory leak in romfs_dev_read()
mm/rodata_test.c: fix missing function declaration
mm/vunmap: add cond_resched() in vunmap_pmd_range
khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()
hugetlb_cgroup: convert comma to semicolon
mailmap: add Andi Kleen
Linus Torvalds [Fri, 21 Aug 2020 19:32:42 +0000 (12:32 -0700)]
Merge tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- The CLINT driver has been split in two: one to handle the M-mode
CLINT (memory mapped and used on NOMMU systems) and one to handle the
S-mode CLINT (via SBI).
- The addition of SiFive's drivers to rv32_defconfig
* tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add SiFive drivers to rv32_defconfig
dt-bindings: timer: Add CLINT bindings
RISC-V: Remove CLINT related code from timer and arch
clocksource/drivers: Add CLINT timer driver
RISC-V: Add mechanism to provide custom IPI operations
Linus Torvalds [Fri, 21 Aug 2020 19:28:33 +0000 (12:28 -0700)]
Merge tag 'for-linus-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"One build fix and a minor fix for suppressing a useless warning when
booting a Xen dom0 via UEFI"
* tag 'for-linus-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Fix build error when CONFIG_ACPI is not set/enabled:
efi: avoid error message when booting under Xen
Linus Torvalds [Fri, 21 Aug 2020 19:26:58 +0000 (12:26 -0700)]
Merge tag 'pm-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a few issues in the operating performance points (OPP)
framework.
Specifics:
- Fix re-enabling of resources in dev_pm_opp_set_rate() (Rajendra
Nayak)
- Fix OPP table reference counting in error paths (Stephen Boyd)"
* tag 'pm-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
opp: Enable resources again if they were disabled earlier
opp: Put opp table in dev_pm_opp_set_rate() if _set_opp_bw() fails
opp: Put opp table in dev_pm_opp_set_rate() for empty tables
Tom Rix [Fri, 21 Aug 2020 13:56:00 +0000 (06:56 -0700)]
net: dsa: b53: check for timeout
clang static analysis reports this problem
b53_common.c:1583:13: warning: The left expression of the compound
assignment is an uninitialized value. The computed value will
also be garbage
ent.port &= ~BIT(port);
~~~~~~~~ ^
ent is set by a successful call to b53_arl_read(). Unsuccessful
calls are caught by an switch statement handling specific returns.
b32_arl_read() calls b53_arl_op_wait() which fails with the
unhandled -ETIMEDOUT.
So add -ETIMEDOUT to the switch statement. Because
b53_arl_op_wait() already prints out a message, do not add another
one.
Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 21 Aug 2020 18:03:38 +0000 (11:03 -0700)]
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Improvements to ext4's block allocator performance for very large file
systems, especially when the file system or files which are highly
fragmented. There is a new mount option, prefetch_block_bitmaps which
will pull in the block bitmaps and set up the in-memory buddy bitmaps
when the file system is initially mounted.
Beyond that, a lot of bug fixes and cleanups. In particular, a number
of changes to make ext4 more robust in the face of write errors or
file system corruptions"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits)
ext4: limit the length of per-inode prealloc list
ext4: reorganize if statement of ext4_mb_release_context()
ext4: add mb_debug logging when there are lost chunks
ext4: Fix comment typo "the the".
jbd2: clean up checksum verification in do_one_pass()
ext4: change to use fallthrough macro
ext4: remove unused parameter of ext4_generic_delete_entry function
mballoc: replace seq_printf with seq_puts
ext4: optimize the implementation of ext4_mb_good_group()
ext4: delete invalid comments near ext4_mb_check_limits()
ext4: fix typos in ext4_mb_regular_allocator() comment
ext4: fix checking of directory entry validity for inline directories
fs: prevent BUG_ON in submit_bh_wbc()
ext4: correctly restore system zone info when remount fails
ext4: handle add_system_zone() failure in ext4_setup_system_zone()
ext4: fold ext4_data_block_valid_rcu() into the caller
ext4: check journal inode extents more carefully
ext4: don't allow overlapping system zones
ext4: handle error of ext4_setup_system_zone() on remount
ext4: delete the invalid BUGON in ext4_mb_load_buddy_gfp()
...
David Howells [Fri, 21 Aug 2020 09:15:12 +0000 (10:15 +0100)]
afs: Fix NULL deref in afs_dynroot_depopulate()
If an error occurs during the construction of an afs superblock, it's
possible that an error occurs after a superblock is created, but before
we've created the root dentry. If the superblock has a dynamic root
(ie. what's normally mounted on /afs), the afs_kill_super() will call
afs_dynroot_depopulate() to unpin any created dentries - but this will
oops if the root hasn't been created yet.
Fix this by skipping that bit of code if there is no root dentry.
Linus Torvalds [Fri, 21 Aug 2020 17:14:16 +0000 (10:14 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"One regression from 5.8 and a few bugs from earlier kernels:
- Various spelling corrections in kernel prints
- Bug fixes in hfi1 and bntx_re
- Revert a 5.8 patch in hns
- Batch update for Mellanox and Cumulus maintainers emails"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain
Revert "RDMA/hns: Reserve one sge in order to avoid local length error"
RDMA/hfi1: Correct an interlock issue for TID RDMA WRITE request
RDMA/bnxt_re: Do not add user qps to flushlist
RDMA/core: Fix spelling mistake "Could't" -> "Couldn't"
RDMA/usnic: Fix spelling mistake "transistion" -> "transition"
RDMA/hns: Fix spelling mistake "epmty" -> "empty"
Linus Torvalds [Fri, 21 Aug 2020 17:07:54 +0000 (10:07 -0700)]
Merge tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes over several drivers, but all are driver-
specific and nothing looks scary.
Slightly large changes are seen in ASoC qcom driver for the bugs that
were revealed by the recent ASoC core change to report the invalid
register access errors. Also ASoC fsl got a slight intensive change
for the distortion fix.
Others are only trivial fixes or device-specific quirks"
* tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: hda: avoid reset of sdo_limit
ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion
ALSA: usb-audio: ignore broken processing/extension unit
ASoC: intel: Fix memleak in sst_media_open
ASoC: wm8994: Avoid attempts to read unreadable registers
ASoC: msm8916-wcd-analog: fix register Interrupt offset
ASoC: wm8994: Prevent access to invalid VU register bits on WM1811
ALSA: hda/realtek: Add model alc298-samsung-headphone
ALSA: usb-audio: Update documentation comment for MS2109 quirk
ALSA: isa: fix spelling mistakes in the comments
ALSA: usb-audio: Add capture support for Saffire 6 (USB 1.1)
ALSA: hda/realtek: Add quirk for Samsung Galaxy Flex Book
ASoC: q6routing: add dummy register read/write function
ASoC: q6afe-dai: mark all widgets registers as SND_SOC_NOPM
ASoC: Make soc_component_read() returning an error code again
ASoC: amd: Replacing component->name with codec_dai->name.
ASoC: fsl: Fix unused variable warning
ASoC: tegra: tegra210_i2s: Fix compile warning with CONFIG_PM=n
ASoC: tegra: tegra210_dmic: Fix compile warning with CONFIG_PM=n
ASoC: tegra: tegra210_ahub: Fix compile warning with CONFIG_PM=n
...
Linus Torvalds [Fri, 21 Aug 2020 17:02:44 +0000 (10:02 -0700)]
Merge tag 'drm-fixes-2020-08-21' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular fixes pull for rc2. Usual rc2 doesn't seem too busy, mainly
i915 and amdgpu. I'd expect the usual uptick for rc3.
amdgpu:
- Fix allocation size
- SR-IOV fixes
- Vega20 SMU feature state caching fix
- Fix custom pptable handling
- Arcturus golden settings update
- Several display fixes
- Fixes for Navy Flounder
- Misc display fixes
- RAS fix
amdkfd:
- SDMA fix for renoir
i915:
- Fix device parameter usage for selftest mock i915 device
- Fix LPSP capability debugfs NULL dereference
- Fix buddy register pagemask table
- Fix intel_atomic_check() non-negative return value
- Fix selftests passing a random 0 into ilog2()
- Fix TGL power well enable/disable ordering
- Switch to PMU module refcounting
- GVT fixes
virtio:
- Add missing dma_fence_put() in virtio_gpu_execbuffer_ioctl()
- Fix memory leak in virtio_gpu_cleanup_object()"
* tag 'drm-fixes-2020-08-21' of git://anongit.freedesktop.org/drm/drm: (34 commits)
Revert "drm/amdgpu: disable gfxoff for navy_flounder"
drm/i915/tgl: Make sure TC-cold is blocked before enabling TC AUX power wells
drm/i915/selftests: Avoid passing a random 0 into ilog2
drm/i915: Fix wrong return value in intel_atomic_check()
drm/i915: Update bw_buddy pagemask table
drm/i915/display: Check for an LPSP encoder before dereferencing
drm/i915: Copy default modparams to mock i915_device
drm/i915: Provide the perf pmu.module
drm/amd/display: fix pow() crashing when given base 0
drm/amd/display: Reset scrambling on Test Pattern
drm/amd/display: fix dcn3 wide timing dsc validation
drm/amd/display: Fix DFPstate hang due to view port changed
drm/amd/display: Assign correct left shift
drm/amd/display: Call DMUB for eDP power control
drm/amdkfd: fix the wrong sdma instance query for renoir
drm/amdgpu: parse ta firmware for navy_flounder
drm/amdgpu: fix NULL pointer access issue when unloading driver
drm/amdgpu: fix uninit-value in arcturus_log_thermal_throttling_event()
drm/amdgpu: disable gfxoff for navy_flounder
drm/amdgpu/display: use GFP_ATOMIC in dcn20_validate_bandwidth_internal
...
mm, page_alloc: fix core hung in free_pcppages_bulk()
The following race is observed with the repeated online, offline and a
delay between two successive online of memory blocks of movable zone.
P1 P2
Online the first memory block in
the movable zone. The pcp struct
values are initialized to default
values,i.e., pcp->high = 0 &
pcp->batch = 1.
Allocate the pages from the
movable zone.
Try to Online the second memory
block in the movable zone thus it
entered the online_pages() but yet
to call zone_pcp_update().
This process is entered into
the exit path thus it tries
to release the order-0 pages
to pcp lists through
free_unref_page_commit().
As pcp->high = 0, pcp->count = 1
proceed to call the function
free_pcppages_bulk().
Update the pcp values thus the
new pcp values are like, say,
pcp->high = 378, pcp->batch = 63.
Read the pcp's batch value using
READ_ONCE() and pass the same to
free_pcppages_bulk(), pcp values
passed here are, batch = 63,
count = 1.
Since num of pages in the pcp
lists are less than ->batch,
then it will stuck in
while(list_empty(list)) loop
with interrupts disabled thus
a core hung.
Avoid this by ensuring free_pcppages_bulk() is called with proper count of
pcp list pages.
The mentioned race is some what easily reproducible without [1] because
pcp's are not updated for the first memory block online and thus there is
a enough race window for P2 between alloc+free and pcp struct values
update through onlining of second memory block.
With [1], the race still exists but it is very narrow as we update the pcp
struct values for the first memory block online itself.
This is not limited to the movable zone, it could also happen in cases
with the normal zone (e.g., hotplug to a node that only has DMA memory, or
no other memory yet).
Doug Berger [Fri, 21 Aug 2020 00:42:24 +0000 (17:42 -0700)]
mm: include CMA pages in lowmem_reserve at boot
The lowmem_reserve arrays provide a means of applying pressure against
allocations from lower zones that were targeted at higher zones. Its
values are a function of the number of pages managed by higher zones and
are assigned by a call to the setup_per_zone_lowmem_reserve() function.
The function is initially called at boot time by the function
init_per_zone_wmark_min() and may be called later by accesses of the
/proc/sys/vm/lowmem_reserve_ratio sysctl file.
The function init_per_zone_wmark_min() was moved up from a module_init to
a core_initcall to resolve a sequencing issue with khugepaged.
Unfortunately this created a sequencing issue with CMA page accounting.
The CMA pages are added to the managed page count of a zone when
cma_init_reserved_areas() is called at boot also as a core_initcall. This
makes it uncertain whether the CMA pages will be added to the managed page
counts of their zones before or after the call to
init_per_zone_wmark_min() as it becomes dependent on link order. With the
current link order the pages are added to the managed count after the
lowmem_reserve arrays are initialized at boot.
This means the lowmem_reserve values at boot may be lower than the values
used later if /proc/sys/vm/lowmem_reserve_ratio is accessed even if the
ratio values are unchanged.
In many cases the difference is not significant, but for example
an ARM platform with 1GB of memory and the following memory layout
cma: Reserved 256 MiB at 0x0000000030000000
Zone ranges:
DMA [mem 0x0000000000000000-0x000000002fffffff]
Normal empty
HighMem [mem 0x0000000030000000-0x000000003fffffff]
would result in 0 lowmem_reserve for the DMA zone. This would allow
userspace to deplete the DMA zone easily.
Funnily enough
$ cat /proc/sys/vm/lowmem_reserve_ratio
would fix up the situation because as a side effect it forces
setup_per_zone_lowmem_reserve.
This commit breaks the link order dependency by invoking
init_per_zone_wmark_min() as a postcore_initcall so that the CMA pages
have the chance to be properly accounted in their zone(s) and allowing
the lowmem_reserve arrays to receive consistent values.
Fixes: bc22af74f271 ("mm: update min_free_kbytes from khugepaged after core initialization") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Jason Baron <jbaron@akamai.com> Cc: David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1597423766-27849-1-git-send-email-opendmb@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Phillip Lougher [Fri, 21 Aug 2020 00:42:21 +0000 (17:42 -0700)]
squashfs: avoid bio_alloc() failure with 1Mbyte blocks
This is a regression introduced by the patch "migrate from ll_rw_block
usage to BIO".
Bio_alloc() is limited to 256 pages (1 Mbyte). This can cause a failure
when reading 1 Mbyte block filesystems. The problem is a datablock can be
fully (or almost uncompressed), requiring 256 pages, but, because blocks
are not aligned to page boundaries, it may require 257 pages to read.
Bio_kmalloc() can handle 1024 pages, and so use this for the edge
condition.
Fixes: 93e72b3c612a ("squashfs: migrate from ll_rw_block usage to BIO") Reported-by: Nicolas Prochazka <nicolas.prochazka@gmail.com> Reported-by: Tomoatsu Shimada <shimada@walbrix.com> Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Cc: Philippe Liard <pliard@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Adrien Schildknecht <adrien+dev@schischi.me> Cc: Daniel Rosenberg <drosen@google.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200815035637.15319-1-phillip@squashfs.org.uk Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 21 Aug 2020 00:42:17 +0000 (17:42 -0700)]
uprobes: __replace_page() avoid BUG in munlock_vma_page()
syzbot crashed on the VM_BUG_ON_PAGE(PageTail) in munlock_vma_page(), when
called from uprobes __replace_page(). Which of many ways to fix it?
Settled on not calling when PageCompound (since Head and Tail are equals
in this context, PageCompound the usual check in uprobes.c, and the prior
use of FOLL_SPLIT_PMD will have cleared PageMlocked already).
Fixes: 5a52c9df62b4 ("uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLIT") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> [5.4+] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008161338360.20413@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
'chan->buf' is malloced in relay_open() by alloc_percpu() but not free
while destroy the relay channel. Fix it by adding free_percpu() before
return from relay_destroy_channel().
Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: David Rientjes <rientjes@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Daniel Axtens <dja@axtens.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Akash Goel <akash.goel@intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200817122826.48518-1-weiyongjun1@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jann Horn [Fri, 21 Aug 2020 00:42:11 +0000 (17:42 -0700)]
romfs: fix uninitialized memory leak in romfs_dev_read()
romfs has a superblock field that limits the size of the filesystem; data
beyond that limit is never accessed.
romfs_dev_read() fetches a caller-supplied number of bytes from the
backing device. It returns 0 on success or an error code on failure;
therefore, its API can't represent short reads, it's all-or-nothing.
However, when romfs_dev_read() detects that the requested operation would
cross the filesystem size limit, it currently silently truncates the
requested number of bytes. This e.g. means that when the content of a
file with size 0x1000 starts one byte before the filesystem size limit,
->readpage() will only fill a single byte of the supplied page while
leaving the rest uninitialized, leaking that uninitialized memory to
userspace.
Fix it by returning an error code instead of truncating the read when the
requested read operation would go beyond the end of the filesystem.
Fixes: da4458bda237 ("NOMMU: Make it possible for RomFS to use MTD devices directly") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: David Howells <dhowells@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200818013202.2246365-1-jannh@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Like zap_pte_range add cond_resched so that we can avoid softlockups as
reported below. On non-preemptible kernel with large I/O map region (like
the one we get when using persistent memory with sector mode), an unmap of
the namespace can report below softlockups.
Hugh Dickins [Fri, 21 Aug 2020 00:42:02 +0000 (17:42 -0700)]
khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()
syzbot crashes on the VM_BUG_ON_MM(khugepaged_test_exit(mm), mm) in
__khugepaged_enter(): yes, when one thread is about to dump core, has set
core_state, and is waiting for others, another might do something calling
__khugepaged_enter(), which now crashes because I lumped the core_state
test (known as "mmget_still_valid") into khugepaged_test_exit(). I still
think it's best to lump them together, so just in this exceptional case,
check mm->mm_users directly instead of khugepaged_test_exit().
Fixes: bbe98f9cadff ("khugepaged: khugepaged_test_exit() check mmget_still_valid()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Yang Shi <shy828301@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Song Liu <songliubraving@fb.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Eric Dumazet <edumazet@google.com> Cc: <stable@vger.kernel.org> [4.8+] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008141503370.18085@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Gleixner [Wed, 19 Aug 2020 19:44:39 +0000 (21:44 +0200)]
core/entry: Respect syscall number rewrites
The transcript of the x86 entry code to the generic version failed to
reload the syscall number from ptregs after ptrace and seccomp have run,
which both can modify the syscall number in ptregs. It returns the original
syscall number instead which is obviously not the right thing to do.
x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
KVM has an optmization to avoid expensive MRS read/writes on
VMENTER/EXIT. It caches the MSR values and restores them either when
leaving the run loop, on preemption or when going out to user space.
The affected MSRs are not required for kernel context operations. This
changed with the recently introduced mechanism to handle FSGSBASE in the
paranoid entry code which has to retrieve the kernel GSBASE value by
accessing per CPU memory. The mechanism needs to retrieve the CPU number
and uses either LSL or RDPID if the processor supports it.
Unfortunately RDPID uses MSR_TSC_AUX which is in the list of cached and
lazily restored MSRs, which means between the point where the guest value
is written and the point of restore, MSR_TSC_AUX contains a random number.
If an NMI or any other exception which uses the paranoid entry path happens
in such a context, then RDPID returns the random guest MSR_TSC_AUX value.
As a consequence this reads from the wrong memory location to retrieve the
kernel GSBASE value. Kernel GS is used to for all regular this_cpu_*()
operations. If the GSBASE in the exception handler points to the per CPU
memory of a different CPU then this has the obvious consequences of data
corruption and crashes.
As the paranoid entry path is the only place which accesses MSR_TSX_AUX
(via RDPID) and the fallback via LSL is not significantly slower, remove
the RDPID alternative from the entry path and always use LSL.
The alternative would be to write MSR_TSC_AUX on every VMENTER and VMEXIT
which would be inflicting massive overhead on that code path.
[ tglx: Rewrote changelog ]
Fixes: eaad981291ee3 ("x86/entry/64: Introduce the FIND_PERCPU_BASE macro") Reported-by: Tom Lendacky <thomas.lendacky@amd.com> Debugged-by: Tom Lendacky <thomas.lendacky@amd.com> Suggested-by: Andy Lutomirski <luto@kernel.org> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20200821105229.18938-1-pbonzini@redhat.com
Kajol Jain [Fri, 21 Aug 2020 08:06:10 +0000 (13:36 +0530)]
powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
Commit 792f73f747b8 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7
device to show cpumask") added cpumask file as part of hv-24x7 driver
inside the interface folder. The cpumask file is supposed to be in the
top folder of the PMU driver in order to make hotplug work.
This patch fixes that issue and creates new group 'cpumask_attr_group'
to add cpumask file and make sure it added in top folder.
Rob Herring [Mon, 3 Aug 2020 19:31:25 +0000 (13:31 -0600)]
KVM: arm64: Print warning when cpu erratum can cause guests to deadlock
If guests don't have certain CPU erratum workarounds implemented, then
there is a possibility a guest can deadlock the system. IOW, only trusted
guests should be used on systems with the erratum.
This is the case for Cortex-A57 erratum 832075.
Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: kvmarm@lists.cs.columbia.edu Link: https://lore.kernel.org/r/20200803193127.3012242-2-robh@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Marc Zyngier [Fri, 31 Jul 2020 17:38:24 +0000 (18:38 +0100)]
arm64: Allow booting of late CPUs affected by erratum 1418040
As we can now switch from a system that isn't affected by 1418040
to a system that globally is affected, let's allow affected CPUs
to come in at a later time.
Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200731173824.107480-3-maz@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Marc Zyngier [Fri, 31 Jul 2020 17:38:23 +0000 (18:38 +0100)]
arm64: Move handling of erratum 1418040 into C code
Instead of dealing with erratum 1418040 on each entry and exit,
let's move the handling to __switch_to() instead, which has
several advantages:
- It can be applied when it matters (switching between 32 and 64
bit tasks).
- It is written in C (yay!)
- It can rely on static keys rather than alternatives
Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200731173824.107480-2-maz@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Boris Burkov [Tue, 18 Aug 2020 18:00:05 +0000 (11:00 -0700)]
btrfs: detect nocow for swap after snapshot delete
can_nocow_extent and btrfs_cross_ref_exist both rely on a heuristic for
detecting a must cow condition which is not exactly accurate, but saves
unnecessary tree traversal. The incorrect assumption is that if the
extent was created in a generation smaller than the last snapshot
generation, it must be referenced by that snapshot. That is true, except
the snapshot could have since been deleted, without affecting the last
snapshot generation.
The original patch claimed a performance win from this check, but it
also leads to a bug where you are unable to use a swapfile if you ever
snapshotted the subvolume it's in. Make the check slower and more strict
for the swapon case, without modifying the general cow checks as a
compromise. Turning swap on does not seem to be a particularly
performance sensitive operation, so incurring a possibly unnecessary
btrfs_search_slot seems worthwhile for the added usability.
Note: Until the snapshot is competely cleaned after deletion,
check_committed_refs will still cause the logic to think that cow is
necessary, so the user must until 'btrfs subvolu sync' finished before
activating the swapfile swapon.
CC: stable@vger.kernel.org # 5.4+ Suggested-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Mon, 10 Aug 2020 21:31:16 +0000 (17:31 -0400)]
btrfs: check the right error variable in btrfs_del_dir_entries_in_log
With my new locking code dbench is so much faster that I tripped over a
transaction abort from ENOSPC. This turned out to be because
btrfs_del_dir_entries_in_log was checking for ret == -ENOSPC, but this
function sets err on error, and returns err. So instead of properly
marking the inode as needing a full commit, we were returning -ENOSPC
and aborting in __btrfs_unlink_inode. Fix this by checking the proper
variable so that we return the correct thing in the case of ENOSPC.
The ENOENT needs to be checked, because btrfs_lookup_dir_item_index()
can return -ENOENT if the dir item isn't in the tree log (which would
happen if we hadn't fsync'ed this guy). We actually handle that case in
__btrfs_unlink_inode, so it's an expected error to get back.
Fixes: 4a500fd178c8 ("Btrfs: Metadata ENOSPC handling for tree log") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com>
[ add note and comment about ENOENT ] Signed-off-by: David Sterba <dsterba@suse.com>
Masahiro Yamada [Thu, 20 Aug 2020 17:43:28 +0000 (02:43 +0900)]
kconfig: qconf: replace deprecated QString::sprintf() with QTextStream
QString::sprintf() is deprecated in the latest Qt version, and spawns
a lot of warnings:
HOSTCXX scripts/kconfig/qconf.o
scripts/kconfig/qconf.cc: In member function ‘void ConfigInfoView::menuInfo()’:
scripts/kconfig/qconf.cc:1090:61: warning: ‘QString& QString::sprintf(const char*, ...)’ is deprecated: Use asprintf(), arg() or QTextStream instead [-Wdeprecated-declarations]
1090 | head += QString().sprintf("<a href=\"s%s\">", sym->name);
| ^
In file included from /usr/include/qt5/QtGui/qkeysequence.h:44,
from /usr/include/qt5/QtWidgets/qaction.h:44,
from /usr/include/qt5/QtWidgets/QAction:1,
from scripts/kconfig/qconf.cc:7:
/usr/include/qt5/QtCore/qstring.h:382:14: note: declared here
382 | QString &sprintf(const char *format, ...) Q_ATTRIBUTE_FORMAT_PRINTF(2, 3);
| ^~~~~~~
scripts/kconfig/qconf.cc:1099:60: warning: ‘QString& QString::sprintf(const char*, ...)’ is deprecated: Use asprintf(), arg() or QTextStream instead [-Wdeprecated-declarations]
1099 | head += QString().sprintf("<a href=\"s%s\">", sym->name);
| ^
In file included from /usr/include/qt5/QtGui/qkeysequence.h:44,
from /usr/include/qt5/QtWidgets/qaction.h:44,
from /usr/include/qt5/QtWidgets/QAction:1,
from scripts/kconfig/qconf.cc:7:
/usr/include/qt5/QtCore/qstring.h:382:14: note: declared here
382 | QString &sprintf(const char *format, ...) Q_ATTRIBUTE_FORMAT_PRINTF(2, 3);
| ^~~~~~~
scripts/kconfig/qconf.cc:1127:90: warning: ‘QString& QString::sprintf(const char*, ...)’ is deprecated: Use asprintf(), arg() or QTextStream instead [-Wdeprecated-declarations]
1127 | debug += QString().sprintf("defined at %s:%d<br><br>", _menu->file->name, _menu->lineno);
| ^
In file included from /usr/include/qt5/QtGui/qkeysequence.h:44,
from /usr/include/qt5/QtWidgets/qaction.h:44,
from /usr/include/qt5/QtWidgets/QAction:1,
from scripts/kconfig/qconf.cc:7:
/usr/include/qt5/QtCore/qstring.h:382:14: note: declared here
382 | QString &sprintf(const char *format, ...) Q_ATTRIBUTE_FORMAT_PRINTF(2, 3);
| ^~~~~~~
scripts/kconfig/qconf.cc: In member function ‘QString ConfigInfoView::debug_info(symbol*)’:
scripts/kconfig/qconf.cc:1150:68: warning: ‘QString& QString::sprintf(const char*, ...)’ is deprecated: Use asprintf(), arg() or QTextStream instead [-Wdeprecated-declarations]
1150 | debug += QString().sprintf("prompt: <a href=\"m%s\">", sym->name);
| ^
In file included from /usr/include/qt5/QtGui/qkeysequence.h:44,
from /usr/include/qt5/QtWidgets/qaction.h:44,
from /usr/include/qt5/QtWidgets/QAction:1,
from scripts/kconfig/qconf.cc:7:
/usr/include/qt5/QtCore/qstring.h:382:14: note: declared here
382 | QString &sprintf(const char *format, ...) Q_ATTRIBUTE_FORMAT_PRINTF(2, 3);
| ^~~~~~~
scripts/kconfig/qconf.cc: In static member function ‘static void ConfigInfoView::expr_print_help(void*, symbol*, const char*)’:
scripts/kconfig/qconf.cc:1225:59: warning: ‘QString& QString::sprintf(const char*, ...)’ is deprecated: Use asprintf(), arg() or QTextStream instead [-Wdeprecated-declarations]
1225 | *text += QString().sprintf("<a href=\"s%s\">", sym->name);
| ^
In file included from /usr/include/qt5/QtGui/qkeysequence.h:44,
from /usr/include/qt5/QtWidgets/qaction.h:44,
from /usr/include/qt5/QtWidgets/QAction:1,
from scripts/kconfig/qconf.cc:7:
/usr/include/qt5/QtCore/qstring.h:382:14: note: declared here
382 | QString &sprintf(const char *format, ...) Q_ATTRIBUTE_FORMAT_PRINTF(2, 3);
| ^~~~~~~
The documentation also says:
"Warning: We do not recommend using QString::asprintf() in new Qt code.
Instead, consider using QTextStream or arg(), both of which support
Unicode strings seamlessly and are type-safe."
Use QTextStream as suggested.
Reported-by: Robert Crawford <flacycads@cox.net> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Thu, 20 Aug 2020 15:16:46 +0000 (00:16 +0900)]
kconfig: qconf: remove qInfo() to get back Qt4 support
qconf is supposed to work with Qt4 and Qt5, but since commit c4f7398bee9c ("kconfig: qconf: make debug links work again"),
building with Qt4 fails as follows:
HOSTCXX scripts/kconfig/qconf.o
scripts/kconfig/qconf.cc: In member function ‘void ConfigInfoView::clicked(const QUrl&)’:
scripts/kconfig/qconf.cc:1241:3: error: ‘qInfo’ was not declared in this scope; did you mean ‘setInfo’?
1241 | qInfo() << "Clicked link is empty";
| ^~~~~
| setInfo
scripts/kconfig/qconf.cc:1254:3: error: ‘qInfo’ was not declared in this scope; did you mean ‘setInfo’?
1254 | qInfo() << "Clicked symbol is invalid:" << data;
| ^~~~~
| setInfo
make[1]: *** [scripts/Makefile.host:129: scripts/kconfig/qconf.o] Error 1
make: *** [Makefile:606: xconfig] Error 2
qInfo() does not exist in Qt4. In my understanding, these call-sites
should be unreachable. Perhaps, qWarning(), assertion, or something
is better, but qInfo() is not the right one to use here, I think.
Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again") Reported-by: Ronald Warsow <rwarsow@gmx.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
So fix it by calling rcu_read_lock() in tipc_aead_encrypt_done()
for b->media->send_msg().
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Reported-by: syzbot+47bbc6b678d317cccbe0@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alaa Hleihel [Wed, 19 Aug 2020 15:24:10 +0000 (18:24 +0300)]
net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow
tcf_ct_handle_fragments() shouldn't free the skb when ip_defrag() call
fails. Otherwise, we will cause a double-free bug.
In such cases, just return the error to the caller.
Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Laight [Wed, 19 Aug 2020 14:40:52 +0000 (14:40 +0000)]
net: sctp: Fix negotiation of the number of data streams.
The number of output and input streams was never being reduced, eg when
processing received INIT or INIT_ACK chunks.
The effect is that DATA chunks can be sent with invalid stream ids
and then discarded by the remote system.
Fixes: 2075e50caf5ea ("sctp: convert to genradix") Signed-off-by: David Laight <david.laight@aculab.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
- Remove pinctrl consumer properties, as they are handled by core
dt-schema,
- Document missing properties,
- Document missing PHY child node,
- Add "additionalProperties: false".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / mirror_ubuntu-kernels.git / log