powerpc/mm/radix: Fix kernel crash when running subpage protect test
This patch fixes the below crash by making sure we touch the subpage
protection related structures only if we know they are allocated on
the platform. With radix translation we don't allocate hash context at
all and trying to access subpage_prot_table results in:
powerpc/powernv/mce: Print additional information about MCE error.
Print more information about MCE error whether it is an hardware or
software error.
Some of the MCE errors can be easily categorized as hardware or
software errors e.g. UEs are due to hardware error, where as error
triggered due to invalid usage of tlbie is a pure software bug. But
not all the MCE errors can be easily categorize into either software
or hardware. There are errors like multihit errors which are usually
result of a software bug, but in some rare cases a hardware failure
can cause a multihit error. In past, we have seen case where after
replacing faulty chip, multihit errors stopped occurring. Same with
parity errors, which are usually due to faulty hardware but there are
chances where multihit can also cause an parity error. Such errors are
difficult to determine what really caused it. Hence this patch
classifies MCE errors into following four categorize:
1. Hardware error:
UE and Link timeout failure errors.
2. Probable hardware error (some chance of software cause)
SLB/ERAT/TLB Parity errors.
3. Software error
Invalid tlbie form.
4. Probable software error (some chance of hardware cause)
SLB/ERAT/TLB Multihit errors.
YueHaibing [Fri, 29 Mar 2019 15:44:56 +0000 (23:44 +0800)]
ocxl: remove set but not used variables 'tid' and 'lpid'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/misc/ocxl/link.c: In function 'xsl_fault_handler':
drivers/misc/ocxl/link.c:187:17: warning: variable 'tid' set but not used
drivers/misc/ocxl/link.c:187:6: warning: variable 'lpid' set but not used
They are never used and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In commit 2bf1071a8d50 ("powerpc/64s: Remove POWER9 DD1 support") the
function __switch_to remove usage for 'dummy_copy_buffer'. Since it is
not used anywhere else, remove it completely.
This remove the following warning:
arch/powerpc/kernel/process.c:1156:17: error: 'dummy_copy_buffer' defined but not used
Nick Desaulniers [Tue, 23 Apr 2019 21:11:14 +0000 (14:11 -0700)]
powerpc/vdso: Drop unnecessary cc-ldoption
Towards the goal of removing cc-ldoption, it seems that --hash-style=
was added to binutils 2.17.50.0.2 in 2006. The minimal required
version of binutils for the kernel according to
Documentation/process/changes.rst is 2.20.
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/powernv/ioda: Handle failures correctly in pnv_pci_ioda_iommu_bypass_supported()
When the return value type was changed from int to bool, few places
were left unchanged, this fixes them. We did not hit these failures as
the first one is not happening at all and the second one is little
more likely to happen if the user switches a 33..58bit DMA capable
device between the VFIO and vendor drivers and there are not so many
of these.
Fixes: 2d6ad41b2c21 ("powerpc/powernv: use the generic iommu bypass code") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Tue, 30 Apr 2019 04:28:17 +0000 (14:28 +1000)]
powerpc/powernv/idle: Restore AMR/UAMOR/AMOR/IAMR after idle
This is an implementation of commits 53a712bae5dd
("powerpc/powernv/idle: Restore AMR/UAMOR/AMOR after idle") and a3f3072db6ca ("powerpc/powernv/idle: Restore IAMR after idle") using
the new C-based idle code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Extract from Nick's patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 12 Apr 2019 14:30:52 +0000 (00:30 +1000)]
powerpc/64s: Reimplement book3s idle code in C
Reimplement Book3S idle code in C, moving POWER7/8/9 implementation
speific HV idle code to the powernv platform code.
Book3S assembly stubs are kept in common code and used only to save
the stack frame and non-volatile GPRs before executing architected
idle instructions, and restoring the stack and reloading GPRs then
returning to C after waking from idle.
The complex logic dealing with threads and subcores, locking, SPRs,
HMIs, timebase resync, etc., is all done in C which makes it more
maintainable.
This is not a strict translation to C code, there are some
significant differences:
- Idle wakeup no longer uses the ->cpu_restore call to reinit SPRs,
but saves and restores them itself.
- The optimisation where EC=ESL=0 idle modes did not have to save GPRs
or change MSR is restored, because it's now simple to do. ESL=1
sleeps that do not lose GPRs can use this optimization too.
- KVM secondary entry and cede is now more of a call/return style
rather than branchy. nap_state_lost is not required because KVM
always returns via NVGPR restoring path.
- KVM secondary wakeup from offline sequence is moved entirely into
the offline wakeup, which avoids a hwsync in the normal idle wakeup
path.
Performance measured with context switch ping-pong on different
threads or cores, is possibly improved a small amount, 1-3% depending
on stop state and core vs thread test for shallow states. Deep states
it's in the noise compared with other latencies.
KVM improvements:
- Idle sleepers now always return to caller rather than branch out
to KVM first.
- This allows optimisations like very fast return to caller when no
state has been lost.
- KVM no longer requires nap_state_lost because it controls NVGPR
save/restore itself on the way in and out.
- The heavy idle wakeup KVM request check can be moved out of the
normal host idle code and into the not-performance-critical offline
code.
- KVM nap code now returns from where it is called, which makes the
flow a bit easier to follow.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Squash the KVM changes in] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Tue, 9 Apr 2019 04:40:05 +0000 (14:40 +1000)]
powerpc/watchdog: Use hrtimers for per-CPU heartbeat
Using a jiffies timer creates a dependency on the tick_do_timer_cpu
incrementing jiffies. If that CPU has locked up and jiffies is not
incrementing, the watchdog heartbeat timer for all CPUs stops and
creates false positives and confusing warnings on local CPUs, and
also causes the SMP detector to stop, so the root cause is never
detected.
Fix this by using hrtimer based timers for the watchdog heartbeat,
like the generic kernel hardlockup detector.
Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reported-by: Ravikumar Bangoria <ravi.bangoria@in.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nathan Fontenot [Tue, 2 Oct 2018 15:35:59 +0000 (10:35 -0500)]
powerpc/pseries: Track LMB nid instead of using device tree
When removing memory we need to remove the memory from the node
it was added to instead of looking up the node it should be in
in the device tree.
During testing we have seen scenarios where the affinity for a
LMB changes due to a partition migration or PRRN event. In these
cases the node the LMB exists in may not match the node the device
tree indicates it belongs in. This can lead to a system crash
when trying to DLPAR remove the LMB after a migration or PRRN
event. The current code looks up the node in the device tree to
remove the LMB from, the crash occurs when we try to offline this
node and it does not have any data, i.e. node_data[nid] == NULL.
To resolve this we need to track the node a LMB belongs to when
it is added to the system so we can remove it from that node instead
of the node that the device tree indicates it should belong to.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fix the below section mismatch warnings.
WARNING: vmlinux.o(.text+0x2d1f44): Section mismatch in reference from the function devm_memremap_pages_release() to the function .meminit.text:arch_remove_memory()
WARNING: vmlinux.o(.text+0x2d265c): Section mismatch in reference from the function devm_memremap_pages() to the function .meminit.text:arch_add_memory()
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/mm/hash64: Map all the kernel regions in the same 0xc range
This patch maps vmalloc, IO and vmemap regions in the 0xc address range
instead of the current 0xd and 0xf range. This brings the mapping closer
to radix translation mode.
With hash 64K page size each of this region is 512TB whereas with 4K config
we are limited by the max page table range of 64TB and hence there regions
are of 16TB size.
powerpc/mm: Reduce memory usage for mm_context_t for radix
Currently, our mm_context_t on book3s64 include all hash specific
context details like slice mask and subpage protection details. We
can skip allocating these with radix translation. This will help us to save
8K per mm_context with radix translation.
powerpc/mm: Add helpers for accessing hash translation related variables
We want to switch to allocating them runtime only when hash translation is
enabled. Add helpers so that both book3s and nohash can be adapted to
upcoming change easily.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/mm: Fix build error with FLATMEM book3s64 config
The current value of MAX_PHYSMEM_BITS cannot work with 32 bit configs.
We used to have MAX_PHYSMEM_BITS not defined without SPARSEMEM and 32
bit configs never expected a value to be set for MAX_PHYSMEM_BITS.
Dependent code such as zsmalloc derived the right values based on other
fields. Instead of finding a value that works with different configs,
use new values only for book3s_64. For 64 bit booke, use the definition
of MAX_PHYSMEM_BITS as per commit a7df61a0e2b6 ("[PATCH] ppc64: Increase sparsemem defaults")
That change was done in 2005 and hopefully will work with book3e 64.
Fixes: 8bc086899816 ("powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch implements Kernel Userspace Access Protection for
book3s/32.
Due to limitations of the processor page protection capabilities,
the protection is only against writing. read protection cannot be
achieved using page protection.
The previous patch modifies the page protection so that RW user
pages are RW for Key 0 and RO for Key 1, and it sets Key 0 for
both user and kernel.
This patch changes userspace segment registers are set to Ku 0
and Ks 1. When kernel needs to write to RW pages, the associated
segment register is then changed to Ks 0 in order to allow write
access to the kernel.
In order to avoid having the read all segment registers when
locking/unlocking the access, some data is kept in the thread_struct
and saved on stack on exceptions. The field identifies both the
first unlocked segment and the first segment following the last
unlocked one. When no segment is unlocked, it contains value 0.
As the hash_page() function is not able to easily determine if a
protfault is due to a bad kernel access to userspace, protfaults
need to be handled by handle_page_fault when KUAP is set.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Drop allow_read/write_to/from_user() as they're now in kup.h,
and adapt allow_user_access() to do nothing when to == NULL] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch prepares Kernel Userspace Access Protection for
book3s/32.
Due to limitations of the processor page protection capabilities,
the protection is only against writing. read protection cannot be
achieved using page protection.
book3s/32 provides the following values for PP bits:
PP00 provides RW for Key 0 and NA for Key 1
PP01 provides RW for Key 0 and RO for Key 1
PP10 provides RW for all
PP11 provides RO for all
Today PP10 is used for RW pages and PP11 for RO pages, and user
segment register's Kp and Ks are set to 1. This patch modifies
page protection to use PP01 for RW pages and sets user segment
registers to Kp 0 and Ks 0.
This will allow to setup Userspace write access protection by
settng Ks to 1 in the following patch.
Kernel space segment registers remain unchanged.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To implement Kernel Userspace Execution Prevention, this patch
sets NX bit on all user segments on kernel entry and clears NX bit
on all user segments on kernel exit.
Note that powerpc 601 doesn't have the NX bit, so KUEP will not
work on it. A warning is displayed at startup.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds Kernel Userspace Access Protection on the 8xx.
When a page is RO or RW, it is set RO or RW for Key 0 and NA
for Key 1.
Up to now, the User group is defined with Key 0 for both User and
Supervisor.
By changing the group to Key 0 for User and Key 1 for Supervisor,
this patch prevents the Kernel from being able to access user data.
At exception entry, the kernel saves SPRN_MD_AP in the regs struct,
and reapply the protection. At exception exit it restores SPRN_MD_AP
with the value saved on exception entry.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Drop allow_read/write_to/from_user() as they're now in kup.h] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Christophe Leroy [Mon, 11 Mar 2019 08:30:32 +0000 (08:30 +0000)]
powerpc/8xx: Only define APG0 and APG1
Since the 8xx implements hardware page table walk assistance,
the PGD entries always point to a 4k aligned page, so the 2 upper
bits of the APG are not clobbered anymore and remain 0. Therefore
only APG0 and APG1 are used and need a definition. We set the
other APG to the lowest permission level.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Thu, 18 Apr 2019 06:51:25 +0000 (16:51 +1000)]
powerpc/mm: Detect bad KUAP faults
When KUAP is enabled we have logic to detect page faults that occur
outside of a valid user access region and are blocked by the AMR.
What we don't have at the moment is logic to detect a fault *within* a
valid user access region, that has been incorrectly blocked by AMR.
This is not meant to ever happen, but it can if we incorrectly
save/restore the AMR, or if the AMR was overwritten for some other
reason.
Currently if that happens we assume it's just a regular fault that
will be corrected by handling the fault normally, so we just return.
But there is nothing the fault handling code can do to fix it, so the
fault just happens again and we spin forever, leading to soft lockups.
So add some logic to detect that case and WARN() if we ever see it.
Arguably it should be a BUG(), but it's more polite to fail the access
and let the kernel continue, rather than taking down the box. There
should be no data integrity issue with failing the fault rather than
BUG'ing, as we're just going to disallow an access that should have
been allowed.
To make the code a little easier to follow, unroll the condition at
the end of bad_kernel_fault() and comment each case, before adding the
call to bad_kuap_fault().
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Thu, 18 Apr 2019 06:51:24 +0000 (16:51 +1000)]
powerpc/64s: Implement KUAP for Radix MMU
Kernel Userspace Access Prevention utilises a feature of the Radix MMU
which disallows read and write access to userspace addresses. By
utilising this, the kernel is prevented from accessing user data from
outside of trusted paths that perform proper safety checks, such as
copy_{to/from}_user() and friends.
Userspace access is disabled from early boot and is only enabled when
performing an operation like copy_{to/from}_user(). The register that
controls this (AMR) does not prevent userspace from accessing itself,
so there is no need to save and restore when entering and exiting
userspace.
When entering the kernel from the kernel we save AMR and if it is not
blocking user access (because eg. we faulted doing a user access) we
reblock user access for the duration of the exception (ie. the page
fault) and then restore the AMR when returning back to the kernel.
This feature can be tested by using the lkdtm driver (CONFIG_LKDTM=y)
and performing the following:
If enabled, this should send SIGSEGV to the thread.
We also add paranoid checking of AMR in switch and syscall return
under CONFIG_PPC_KUAP_DEBUG.
Co-authored-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Russell Currey [Thu, 18 Apr 2019 06:51:23 +0000 (16:51 +1000)]
powerpc/lib: Refactor __patch_instruction() to use __put_user_asm()
__patch_instruction() is called in early boot, and uses
__put_user_size(), which includes the allow/prevent calls to enforce
KUAP, which could either be called too early, or in the Radix case,
forced to use "early_" versions of functions just to safely handle
this one case.
__put_user_asm() does not do this, and thus is safe to use both in
early boot, and later on since in this case it should only ever be
touching kernel memory.
__patch_instruction() was previously refactored to use
__put_user_size() in order to be able to return -EFAULT, which would
allow the kernel to patch instructions in userspace, which should
never happen. This has the functional change of causing faults on
userspace addresses if KUAP is turned on, which should never happen in
practice.
A future enhancement could be to double check the patch address is
definitely allowed to be tampered with by the kernel.
Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Russell Currey [Thu, 18 Apr 2019 06:51:21 +0000 (16:51 +1000)]
powerpc/64: Setup KUP on secondary CPUs
Some platforms (i.e. Radix MMU) need per-CPU initialisation for KUP.
Any platforms that only want to do KUP initialisation once
globally can just check to see if they're running on the boot CPU, or
check if whatever setup they need has already been performed.
Note that this is only for 64-bit.
Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc: Add a framework for Kernel Userspace Access Protection
This patch implements a framework for Kernel Userspace Access
Protection.
Then subarches will have the possibility to provide their own
implementation by providing setup_kuap() and
allow/prevent_user_access().
Some platforms will need to know the area accessed and whether it is
accessed from read, write or both. Therefore source, destination and
size and handed over to the two functions.
mpe: Rename to allow/prevent rather than unlock/lock, and add
read/write wrappers. Drop the 32-bit code for now until we have an
implementation for it. Add kuap to pt_regs for 64-bit as well as
32-bit. Don't split strings, use pr_crit_ratelimited().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc: Add framework for Kernel Userspace Protection
This patch adds a skeleton for Kernel Userspace Protection
functionnalities like Kernel Userspace Access Protection and Kernel
Userspace Execution Prevention
The subsequent implementation of KUAP for radix makes use of a MMU
feature in order to patch out assembly when KUAP is disabled or
unsupported. This won't work unless there's an entry point for KUP
support before the feature magic happens, so for PPC64 setup_kup() is
called early in setup.
On PPC32, feature_fixup() is done too early to allow the same.
Suggested-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Russell Currey [Thu, 18 Apr 2019 06:51:16 +0000 (16:51 +1000)]
powerpc/powernv/idle: Restore IAMR after idle
Without restoring the IAMR after idle, execution prevention on POWER9
with Radix MMU is overwritten and the kernel can freely execute
userspace without faulting.
This is necessary when returning from any stop state that modifies
user state, as well as hypervisor state.
To test how this fails without this patch, load the lkdtm driver and
do the following:
Michael Neuling [Mon, 1 Apr 2019 06:03:12 +0000 (17:03 +1100)]
powerpc: Add force enable of DAWR on P9 option
This adds a flag so that the DAWR can be enabled on P9 via:
echo Y > /sys/kernel/debug/powerpc/dawr_enable_dangerous
The DAWR was previously force disabled on POWER9 in: 9654153158 powerpc: Disable DAWR in the base POWER9 CPU features
Also see Documentation/powerpc/DAWR-POWER9.txt
This is a dangerous setting, USE AT YOUR OWN RISK.
Some users may not care about a bad user crashing their box
(ie. single user/desktop systems) and really want the DAWR. This
allows them to force enable DAWR.
This flag can also be used to disable DAWR access. Once this is
cleared, all DAWR access should be cleared immediately and your
machine once again safe from crashing.
Userspace may get confused by toggling this. If DAWR is force
enabled/disabled between getting the number of breakpoints (via
PTRACE_GETHWDBGINFO) and setting the breakpoint, userspace will get an
inconsistent view of what's available. Similarly for guests.
For the DAWR to be enabled in a KVM guest, the DAWR needs to be force
enabled in the host AND the guest. For this reason, this won't work on
POWERVM as it doesn't allow the HCALL to work. Writes of 'Y' to the
dawr_enable_dangerous file will fail if the hypervisor doesn't support
writing the DAWR.
To double check the DAWR is working, run this kernel selftest:
tools/testing/selftests/powerpc/ptrace/ptrace-hwbreak.c
Any errors/failures/skips mean something is wrong.
Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/numa: document topology_updates_enabled, disable by default
Changing the NUMA associations for CPUs and memory at runtime is
basically unsupported by the core mm, scheduler etc. We see all manner
of crashes, warnings and instability when the pseries code tries to do
this. Disable this behavior by default, and document the switch a bit.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When booted with "topology_updates=no", or when "off" is written to
/proc/powerpc/topology_updates, NUMA reassignments are inhibited for
PRRN and VPHN events. However, migration and suspend unconditionally
re-enable reassignments via start_topology_update(). This is
incoherent.
Check the topology_updates_enabled flag in
start/stop_topology_update() so that callers of those APIs need not be
aware of whether reassignments are enabled. This allows the
administrative decision on reassignments to remain in force across
migrations and suspensions.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Andrew Donnellan [Thu, 14 Mar 2019 04:27:27 +0000 (15:27 +1100)]
powerpc/powernv: Squash sparse warnings in opal-call.c
sparse complains a lot about opal-call.c:
arch/powerpc/platforms/powernv/opal-call.c:128:1: warning: symbol 'opal_invalid_call' was not declared. Should it be static?
arch/powerpc/platforms/powernv/opal-call.c:129:1: warning: symbol 'opal_console_write' was not declared. Should it be static?
arch/powerpc/platforms/powernv/opal-call.c:130:1: warning: symbol 'opal_console_read' was not declared. Should it be static?
Those symbols are forward declared in opal.h, but we can't include that
because the function signatures in opal.h are different. So instead, just
add an extra forward declaration to the OPAL_CALL macro to shut sparse up.
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
George Spelvin [Thu, 21 Mar 2019 10:42:22 +0000 (10:42 +0000)]
powerpc/crypto: Use cheaper random numbers for crc-vpmsum self-test
This code was filling a 64K buffer from /dev/urandom in order to
compute a CRC over (on average half of) it by two different methods,
comparing the CRCs, and repeating.
This is not a remotely security-critical application, so use the far
faster and cheaper prandom_u32() generator.
And, while we're at it, only fill as much of the buffer as we plan to use.
Signed-off-by: George Spelvin <lkml@sdf.org> Acked-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Julia Lawall [Sat, 23 Feb 2019 13:20:34 +0000 (14:20 +0100)]
powerpc/83xx: Add missing of_node_put() after of_device_is_available()
Add an of_node_put() when a tested device node is not available.
Fixes: c026c98739c7e ("powerpc/83xx: Do not configure or probe disabled FSL DR USB controllers") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul McKenney attempted to update all email addresses @linux.vnet.ibm.com
to @linux.ibm.com in commit 1dfddcdb95c4
("MAINTAINERS: Update from @linux.vnet.ibm.com to @linux.ibm.com"), but
some still remained.
We update the remaining email addresses in MAINTAINERS, hopefully finally
catching all cases for good.
Fixes: 1dfddcdb95c4 ("MAINTAINERS: Update from @linux.vnet.ibm.com to @linux.ibm.com") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Qian Cai [Sun, 7 Apr 2019 01:54:47 +0000 (21:54 -0400)]
powerpc/pseries/pmem: Fix a set but not used value
The commit 4c5d87db4978 ("powerpc/pseries: PAPR persistent memory
support") set a local variable "count" in dlpar_hp_pmem() but never
use it.
arch/powerpc/platforms/pseries/pmem.c: In function 'dlpar_hp_pmem':
arch/powerpc/platforms/pseries/pmem.c:109:6: warning: variable 'count' set but not used
Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Qian Cai [Sun, 7 Apr 2019 02:48:08 +0000 (22:48 -0400)]
powerpc/pseries/iommu: Fix set but not used values
The commit b7d6bf4fdd47 ("powerpc/pseries/pci: Remove obsolete SW
invalidate") left 2 variables unused.
arch/powerpc/platforms/pseries/iommu.c:108:17: warning: variable 'tces' set but not used
__be64 *tcep, *tces;
^~~~
arch/powerpc/platforms/pseries/iommu.c:132:17: warning: variable 'tces' set but not used
__be64 *tcep, *tces;
^~~~
Also, the commit 68c0449ea16d ("powerpc/pseries/iommu: Use memory@
nodes in max RAM address calculation") set "ranges" in
ddw_memory_hotplug_max() but never use it.
arch/powerpc/platforms/pseries/iommu.c: In function 'ddw_memory_hotplug_max':
arch/powerpc/platforms/pseries/iommu.c:948:7: warning: variable 'ranges' set but not used
int ranges, n_mem_addr_cells, n_mem_size_cells, len;
^~~~~~
Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pte_unmap() compiles away on some powerpc platforms, so silence the
warnings below by making it a static inline function.
mm/memory.c: In function 'copy_pte_range':
mm/memory.c:820:24: warning: variable 'orig_dst_pte' set but not used
mm/memory.c:820:9: warning: variable 'orig_src_pte' set but not used
mm/madvise.c: In function 'madvise_free_pte_range':
mm/madvise.c:318:9: warning: variable 'orig_pte' set but not used
mm/swap_state.c: In function 'swap_ra_info':
mm/swap_state.c:634:15: warning: variable 'orig_pte' set but not used
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Laurent Vivier [Wed, 13 Mar 2019 10:25:28 +0000 (11:25 +0100)]
powerpc/mm: move warning from resize_hpt_for_hotplug()
resize_hpt_for_hotplug() reports a warning when it cannot
resize the hash page table ("Unable to resize hash page
table to target order") but in some cases it's not a problem
and can make user thinks something has not worked properly.
This patch moves the warning to arch_remove_memory() to
only report the problem when it is needed.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
So to get the keyboard working in the graphical console there again,
we should now include XHCI support in the kernel by default, too.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is a follow up to the patch that fixed misleading print for TLB
mutlihit due to wrongly populated mc_err_types[] array. Convert all the
static array initialization to '[x] = val' style for better
readability of array indexing and avoid any further confusion.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Russell Currey [Wed, 27 Mar 2019 03:35:54 +0000 (14:35 +1100)]
powerpc/64: Fix booting large kernels with STRICT_KERNEL_RWX
With STRICT_KERNEL_RWX enabled anything marked __init is placed at a 16M
boundary. This is necessary so that it can be repurposed later with
different permissions. However, in kernels with text larger than 16M,
this pushes early_setup past 32M, incapable of being reached by the
branch instruction.
Fix this by setting the CTR and branching there instead.
Fixes: 1e0fc9d1eb2b ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs") Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Fix it to work on BE by using DOTSYM()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/embedded6xx: Remove unused functions holly_power_off and holly_halt
Silence the following warnings triggered using W=1:
arch/powerpc/platforms/embedded6xx/holly.c:236:6: error: no previous prototype for 'holly_power_off'
arch/powerpc/platforms/embedded6xx/holly.c:243:6: error: no previous prototype for 'holly_halt'
In commit cb9e4d10c448 ("[POWERPC] Add support for 750CL Holly board")
new functions were added. Since most of these functions can be made
static, make it so.
Both holly_power_off and holly_halt functions were not changed since
they are unused, making them static would have triggered the following
warning (treated as error):
arch/powerpc/platforms/embedded6xx/holly.c:244:13: error: 'holly_halt' defined but not used
Silence the following warnings triggered using W=1:
arch/powerpc/platforms/embedded6xx/holly.c:47:5: error: no previous prototype for 'holly_exclude_device'
arch/powerpc/platforms/embedded6xx/holly.c:190:6: error: no previous prototype for 'holly_show_cpuinfo'
arch/powerpc/platforms/embedded6xx/holly.c:196:17: error: no previous prototype for 'holly_restart'
Ben Hutchings [Fri, 22 Mar 2019 04:24:37 +0000 (04:24 +0000)]
powerpc: vdso: Make vdso32 installation conditional in vdso_install
The 32-bit vDSO is not needed and not normally built for 64-bit
little-endian configurations. However, the vdso_install target still
builds and installs it. Add the same config condition as is normally
used for the build.
Fixes: e0d005916994 ("powerpc/vdso: Disable building the 32-bit VDSO ...") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Thu, 14 Mar 2019 12:54:53 +0000 (23:54 +1100)]
powerpc/mm/64: Document the sizes of/sizes mapped by Pxx_INDEX_SIZE
Add comments describing the size in bytes of the various levels of the
page table tree, and the size of the virtual address space mapped by
each level, to make it clear what the sizes are without having to also
look up other definitions.
The code that calculates the sizes actually uses sizeof(pgd_t) etc.,
so in theory these comments could skew vs the code, but the size of
pgd_t etc. is unlikely to change very often.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In arch/powerpc/mm/highmem.c, BUG_ON() is called only when
CONFIG_DEBUG_HIGHMEM is selected, this means the BUG_ON() is not vital
and can be replaced by a a WARN_ON().
At the same time, use IS_ENABLED() instead of #ifdef to clean a bit.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc: Fix defconfig choice logic when cross compiling
Our logic for choosing defconfig doesn't work well in some situations.
For example if you're on a ppc64le machine but you specify a non-empty
CROSS_COMPILE, in order to use a non-default toolchain, then defconfig
will give you ppc64_defconfig (big endian):
$ make CROSS_COMPILE=~/toolchains/gcc-8/bin/powerpc-linux- defconfig
*** Default configuration is based on 'ppc64_defconfig'
This is because we assume that CROSS_COMPILE being set means we
can't be on a ppc machine and rather than checking we just default to
ppc64_defconfig.
We should just ignore CROSS_COMPILE, instead check the machine with
uname and if it's one of ppc, ppc64 or ppc64le then use that
defconfig. If it's none of those then we fall back to ppc64_defconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/xive: add OPAL extensions for the XIVE native exploitation support
The support for XIVE native exploitation mode in Linux/KVM needs a
couple more OPAL calls to get and set the state of the XIVE internal
structures being used by a sPAPR guest.
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/mm: Define MAX_PHYSMEM_BITS for all 64-bit configs
The recent commit 8bc086899816 ("powerpc/mm: Only define
MAX_PHYSMEM_BITS in SPARSEMEM configurations") removed our definition
of MAX_PHYSMEM_BITS when SPARSEMEM is disabled.
This inadvertently broke some 64-bit FLATMEM using configs with eg:
arch/powerpc/include/asm/book3s/64/mmu-hash.h:584:6: error: "MAX_PHYSMEM_BITS" is not defined, evaluates to 0
#if (MAX_PHYSMEM_BITS > MAX_EA_BITS_PER_CONTEXT)
^~~~~~~~~~~~~~~~
Fix it by making sure we define MAX_PHYSMEM_BITS for all 64-bit
configs regardless of SPARSEMEM.
Fixes: 8bc086899816 ("powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations") Reported-by: Andreas Schwab <schwab@linux-m68k.org> Reported-by: Hugh Dickins <hughd@google.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 48e7b76957 ("powerpc/64s/hash: Convert SLB miss handlers to C")
broke the radix-mode segment exception handler. In radix mode, this is
exception is not an SLB miss, rather it signals that the EA is outside
the range translated by any page table.
The commit lost the radix feature alternate code patch, which can
cause faults to some EAs to kernel BUG at arch/powerpc/mm/slb.c:639!
The original radix code would send faults to slb_miss_large_addr,
which would end up faulting due to slb_addr_limit being 0. This patch
sends radix directly to do_bad_slb_fault, which is a bit clearer.
Fixes: 48e7b7695745 ("powerpc/64s/hash: Convert SLB miss handlers to C") Cc: stable@vger.kernel.org # v4.20+ Reported-by: Anton Blanchard <anton@samba.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit b5b4453e7912 ("powerpc/vdso64: Fix CLOCK_MONOTONIC
inconsistencies across Y2038") changed the type of wtom_clock_sec
to s64 on PPC64. Therefore, VDSO32 needs to read it with a 4 bytes
shift in order to retrieve the lower part of it.
Fixes: b5b4453e7912 ("powerpc/vdso64: Fix CLOCK_MONOTONIC inconsistencies across Y2038") Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Christophe Leroy [Mon, 25 Mar 2019 08:43:33 +0000 (08:43 +0000)]
powerpc/32: Fix early boot failure with RTAS built-in
Commit 0df977eafc79 ("powerpc/6xx: Don't use SPRN_SPRG2 for storing
stack pointer while in RTAS") changes the code to use a field in
thread struct to store the stack pointer while in RTAS instead of
using SPRN_SPRG2. It therefore converts all places which were
manipulating SPRN_SPRG2 to use that field. During early startup, the
zeroing of SPRN_SPRG2 has been replaced by a zeroing of that field in
thread struct. But at least in start_here, that's done wrongly because
it used the physical address of the fields while MMU is on at that
time.
So the virtual address of the field should be used instead, but in
the meantime, thread struct has already been zeroed and initialised
so we can just drop this initialisation.
Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Fixes: 0df977eafc79 ("powerpc/6xx: Don't use SPRN_SPRG2 for storing stack pointer while in RTAS") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Linus Torvalds [Sun, 31 Mar 2019 15:55:59 +0000 (08:55 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"A collection of x86 and ARM bugfixes, and some improvements to
documentation.
On top of this, a cleanup of kvm_para.h headers, which were exported
by some architectures even though they not support KVM at all. This is
responsible for all the Kbuild changes in the diffstat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
Documentation: kvm: clarify KVM_SET_USER_MEMORY_REGION
KVM: doc: Document the life cycle of a VM and its resources
KVM: selftests: complete IO before migrating guest state
KVM: selftests: disable stack protector for all KVM tests
KVM: selftests: explicitly disable PIE for tests
KVM: selftests: assert on exit reason in CR4/cpuid sync test
KVM: x86: update %rip after emulating IO
x86/kvm/hyper-v: avoid spurious pending stimer on vCPU init
kvm/x86: Move MSR_IA32_ARCH_CAPABILITIES to array emulated_msrs
KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hosts
kvm: don't redefine flags as something else
kvm: mmu: Used range based flushing in slot_handle_level_range
KVM: export <linux/kvm_para.h> and <asm/kvm_para.h> iif KVM is supported
KVM: x86: remove check on nr_mmu_pages in kvm_arch_commit_memory_region()
kvm: nVMX: Add a vmentry check for HOST_SYSENTER_ESP and HOST_SYSENTER_EIP fields
KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)
KVM: Reject device ioctls from processes other than the VM's creator
KVM: doc: Fix incorrect word ordering regarding supported use of APIs
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size'
KVM: nVMX: Do not inherit quadrant and invalid for the root shadow EPT
...
Linus Torvalds [Sun, 31 Mar 2019 15:37:04 +0000 (08:37 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling fixes from Thomas Gleixner:
"Core libraries:
- Fix max perf_event_attr.precise_ip detection.
- Fix parser error for uncore event alias
- Fixup ordering of kernel maps after obtaining the main kernel map
address.
Intel PT:
- Fix TSC slip where A TSC packet can slip past MTC packets so that
the timestamp appears to go backwards.
- Fixes for exported-sql-viewer GUI conversion to python3.
ARM coresight:
- Fix the build by adding a missing case value for enumeration value
introduced in newer library, that now is the required one.
tool headers:
- Syncronize kernel headers with the kernel, getting new io_uring and
pidfd_send_signal syscalls so that 'perf trace' can handle them"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf pmu: Fix parser error for uncore event alias
perf scripts python: exported-sql-viewer.py: Fix python3 support
perf scripts python: exported-sql-viewer.py: Fix never-ending loop
perf machine: Update kernel map address and re-order properly
tools headers uapi: Sync powerpc's asm/kvm.h copy with the kernel sources
tools headers: Update x86's syscall_64.tbl and uapi/asm-generic/unistd
tools headers uapi: Update drm/i915_drm.h
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
tools headers uapi: Sync linux/fcntl.h to get the F_SEAL_FUTURE_WRITE addition
tools headers uapi: Sync asm-generic/mman-common.h and linux/mman.h
perf evsel: Fix max perf_event_attr.precise_ip detection
perf intel-pt: Fix TSC slip
perf cs-etm: Add missing case value
Linus Torvalds [Sun, 31 Mar 2019 15:22:12 +0000 (08:22 -0700)]
Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fixes from Thomas Gleixner:
"Two SMT/hotplug related fixes:
- Prevent crash when HOTPLUG_CPU is disabled and the CPU bringup
aborts. This is triggered with the 'nosmt' command line option, but
can happen by any abort condition. As the real unplug code is not
compiled in, prevent the fail by keeping the CPU in zombie state.
- Enforce HOTPLUG_CPU for SMP on x86 to avoid the above situation
completely. With 'nosmt' being a popular option it's required to
unplug the half brought up sibling CPUs (due to the MCE wreckage)
completely"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Enforce CONFIG_HOTPLUG_CPU when SMP=y
cpu/hotplug: Prevent crash when CPU bringup fails on CONFIG_HOTPLUG_CPU=n
Linus Torvalds [Sun, 31 Mar 2019 14:47:21 +0000 (07:47 -0700)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Thomas Gleixner:
"A small set of core updates:
- Make the watchdog respect the selected CPU mask again. That was
broken by the rework of the watchdog thread management and caused
inconsistent state and NMI watchdog being unstoppable.
- Ensure that the objtool build can find the libelf location.
- Remove dead kcore stub code"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
watchdog: Respect watchdog cpumask on CPU hotplug
objtool: Query pkg-config for libelf location
proc/kcore: Remove unused kclist_add_remap()
Linus Torvalds [Sun, 31 Mar 2019 14:44:13 +0000 (07:44 -0700)]
Merge tag 'powerpc-5.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Three non-regression fixes.
- Our optimised memcmp could read past the end of one of the buffers
and potentially trigger a page fault leading to an oops.
- Some of our code to read energy management data on PowerVM had an
endian bug leading to bogus results.
- When reporting a machine check exception we incorrectly reported
TLB multihits as D-Cache multhits due to a missing entry in the
array of causes.
Thanks to: Chandan Rajendra, Gautham R. Shenoy, Mahesh Salgaonkar,
Segher Boessenkool, Vaidyanathan Srinivasan"
* tag 'powerpc-5.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/mce: Fix misleading print for TLB mutlihit
powerpc/pseries/energy: Use OF accessor functions to read ibm,drc-indexes
powerpc/64: Fix memcmp reading past the end of src/dest
Linus Torvalds [Sun, 31 Mar 2019 14:42:39 +0000 (07:42 -0700)]
Merge tag 'dmaengine-fix-5.1-rc3' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
- Revert "dmaengine: stm32-mdma: Add a check on read_u32_array" as that
caused regression
- Fix MAINTAINER file uniphier-mdmac.c file path
* tag 'dmaengine-fix-5.1-rc3' of git://git.infradead.org/users/vkoul/slave-dma:
MAINTAINERS: Fix uniphier-mdmac.c file path
dmaengine: stm32-mdma: Revert "dmaengine: stm32-mdma: Add a check on read_u32_array"
Linus Torvalds [Sat, 30 Mar 2019 19:12:56 +0000 (12:12 -0700)]
Merge tag 'led-fixes-for-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED fixes from Jacek Anaszewski:
- fix refcnt leak on interface rename
- use memcpy in device_name_store() to avoid including garbage from a
previous, longer value in the device_name
- fix a potential NULL pointer dereference in case of_match_device()
cannot find a match
* tag 'led-fixes-for-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: trigger: netdev: use memcpy in device_name_store
leds: pca9532: fix a potential NULL pointer dereference
leds: trigger: netdev: fix refcnt leak on interface rename
Linus Torvalds [Sat, 30 Mar 2019 18:33:34 +0000 (11:33 -0700)]
Merge tag 'gpio-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"As you can see [in the git history] I was away on leave and Bartosz
kindly stepped in and collected a slew of fixes, I pulled them into my
tree in two sets and merged some two more fixes (fixing my own caused
bugs) on top.
Summary:
- Revert the extended use of gpio_set_config() and think about how we
can do this properly.
- Fix up the SPI CS GPIO handling so it now works properly on the SPI
bus children, as intended.
- Error paths and driver fixes"
* tag 'gpio-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mockup: use simple_read_from_buffer() in debugfs read callback
gpio: of: Fix of_gpiochip_add() error path
gpio: of: Check for "spi-cs-high" in child instead of parent node
gpio: of: Check propname before applying "cs-gpios" quirks
gpio: mockup: fix debugfs read
Revert "gpio: use new gpio_set_config() helper in more places"
gpio: aspeed: fix a potential NULL pointer dereference
gpio: amd-fch: Fix bogus SPDX identifier
gpio: adnp: Fix testing wrong value in adnp_gpio_direction_input
gpio: exar: add a check for the return value of ida_simple_get fails
Rasmus Villemoes [Thu, 14 Mar 2019 14:06:14 +0000 (15:06 +0100)]
leds: trigger: netdev: use memcpy in device_name_store
If userspace doesn't end the input with a newline (which can easily
happen if the write happens from a C program that does write(fd,
iface, strlen(iface))), we may end up including garbage from a
previous, longer value in the device_name. For example
I highly doubt anybody is relying on this behaviour, so switch to
simply copying the bytes (we've already checked that size is <
IFNAMSIZ) and unconditionally zero-terminate it; of course, we also
still have to strip a trailing newline.
This is also preparation for future patches.
Fixes: 06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger") Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Linus Torvalds [Sat, 30 Mar 2019 17:35:20 +0000 (10:35 -0700)]
Merge tag 'staging-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for 5.1-rc3, and one driver
removal.
The biggest thing here is the removal of the mt7621-eth driver as a
"real" network driver was merged in 5.1-rc1 for this hardware, so this
old driver can now be removed.
Other than that, there are just a number of small fixes, all resolving
reported issues and some potential corner cases for error handling
paths.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vt6655: Remove vif check from vnt_interrupt
staging: erofs: keep corrupted fs from crashing kernel in erofs_readdir()
staging: octeon-ethernet: fix incorrect PHY mode
staging: vc04_services: Fix an error code in vchiq_probe()
staging: erofs: fix error handling when failed to read compresssed data
staging: vt6655: Fix interrupt race condition on device start up.
staging: rtlwifi: Fix potential NULL pointer dereference of kzalloc
staging: rtl8712: uninitialized memory in read_bbreg_hdl()
staging: rtlwifi: rtl8822b: fix to avoid potential NULL pointer dereference
staging: rtl8188eu: Fix potential NULL pointer dereference of kcalloc
staging, mt7621-pci: fix build without pci support
staging: speakup_soft: Fix alternate speech with other synths
staging: axis-fifo: add CONFIG_OF dependency
staging: olpc_dcon_xo_1: add missing 'const' qualifier
staging: comedi: ni_mio_common: Fix divide-by-zero for DIO cmdtest
staging: erofs: fix to handle error path of erofs_vmap()
staging: mt7621-dts: update ethernet settings.
staging: remove mt7621-eth
Linus Torvalds [Sat, 30 Mar 2019 17:30:38 +0000 (10:30 -0700)]
Merge tag 'tty-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 5.1-rc3.
Nothing major here, just a number of potential problems fixes for
error handling paths, as well as some other minor bugfixes for
reported issues with 5.1-rc1.
All of these have been in linux-next with no reported issues"
* tag 'tty-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: fix NULL pointer issue when tty_port ops is not set
Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc
dt-bindings: serial: Add compatible for Mediatek MT8183
tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped
tty/serial: atmel: Add is_half_duplex helper
serial: sh-sci: Fix setting SCSCR_TIE while transferring data
serial: ar933x_uart: Fix build failure with disabled console
tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup
sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()
tty: mxs-auart: fix a potential NULL pointer dereference
tty: atmel_serial: fix a potential NULL pointer dereference
serial: max310x: Fix to avoid potential NULL pointer dereference
serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference
Linus Torvalds [Sat, 30 Mar 2019 17:26:36 +0000 (10:26 -0700)]
Merge tag 'usb-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.1-rc3.
Nothing major at all here, just a small collection of fixes for
reported issues, and potential problems with error handling paths.
Also a few new device ids, as normal.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
USB: serial: option: add Olicard 600
USB: serial: cp210x: add new device id
usb: u132-hcd: fix resource leak
usb: cdc-acm: fix race during wakeup blocking TX traffic
usb: mtu3: fix EXTCON dependency
usb: usb251xb: fix to avoid potential NULL pointer dereference
usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode fails
phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs
xhci: Don't let USB3 ports stuck in polling state prevent suspend
usb: xhci: dbc: Don't free all memory with spinlock held
xhci: Fix port resume done detection for SS ports with LPM enabled
USB: serial: mos7720: fix mos_parport refcount imbalance on error path
USB: gadget: f_hid: fix deadlock in f_hidg_write()
usb: gadget: net2272: Fix net2272_dequeue()
usb: gadget: net2280: Fix net2280_dequeue()
usb: gadget: net2280: Fix overrun of OUT messages
usb: dwc3: pci: add support for Comet Lake PCH ID
usb: usb251xb: Remove unnecessary comparison of unsigned integer with >= 0
usb: common: Consider only available nodes for dr_mode
usb: typec: tcpm: Try PD-2.0 if sink does not respond to 3.0 source-caps
...
Linus Torvalds [Sat, 30 Mar 2019 17:09:11 +0000 (10:09 -0700)]
Merge tag 'acpi-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This corrects a previous attempt to make Linux use its own set of ACPI
debug flags different from the upstream ACPICA's default (Erik
Schmauss)"
* tag 'acpi-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: use different default debug value than ACPICA
Linus Torvalds [Sat, 30 Mar 2019 17:06:09 +0000 (10:06 -0700)]
Merge tag 'pm-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix CPU base frequency reporting in the intel_pstate driver and
a use-after-free in the scpi-cpufreq driver.
Specifics:
- Fix the ACPI CPPC library to actually follow the specification when
decoding the guaranteed performance register information and make
the intel_pstate driver to fall back to the nominal frequency when
reporting the base frequency if the guaranteed performance register
information is not there (Srinivas Pandruvada).
- Fix use-after-free in the exit callback of the scpi-cpufreq left
after an update during the 5.0 development cycle (Vincent Stehlé)"
* tag 'pm-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: scpi: Fix use after free
cpufreq: intel_pstate: Also use CPPC nominal_perf for base_frequency
ACPI / CPPC: Fix guaranteed performance handling
Linus Torvalds [Sat, 30 Mar 2019 16:19:09 +0000 (09:19 -0700)]
Merge branch 'fixes-v5.1-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security layer fixes from James Morris:
"Yama and LSM config fixes"
* 'fixes-v5.1-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
LSM: Revive CONFIG_DEFAULT_SECURITY_* for "make oldconfig"
Yama: mark local symbols as static
Linus Torvalds [Fri, 29 Mar 2019 23:02:28 +0000 (16:02 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"22 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links
fs: fs_parser: fix printk format warning
checkpatch: add %pt as a valid vsprintf extension
mm/migrate.c: add missing flush_dcache_page for non-mapped page migrate
drivers/block/zram/zram_drv.c: fix idle/writeback string compare
mm/page_isolation.c: fix a wrong flag in set_migratetype_isolate()
mm/memory_hotplug.c: fix notification in offline error path
ptrace: take into account saved_sigmask in PTRACE{GET,SET}SIGMASK
fs/proc/kcore.c: make kcore_modules static
include/linux/list.h: fix list_is_first() kernel-doc
mm/debug.c: fix __dump_page when mapping->host is not set
mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified
include/linux/hugetlb.h: convert to use vm_fault_t
iommu/io-pgtable-arm-v7s: request DMA32 memory, and improve debugging
mm: add support for kmem caches in DMA32 zone
ocfs2: fix inode bh swapping mixup in ocfs2_reflink_inodes_lock
mm/hotplug: fix offline undo_isolate_page_range()
fs/open.c: allow opening only regular files during execve()
mailmap: add Changbin Du
mm/debug.c: add a cast to u64 for atomic64_read()
...
projects / mirror_ubuntu-hirsute-kernel.git / log