Tony Nguyen [Thu, 7 Oct 2021 23:00:23 +0000 (16:00 -0700)]
ice: Remove excess error variables
ice_status previously had a variable to contain these values where other
error codes had a variable as well. With ice_status now being an int,
there is no need for two variables to hold error values. In cases where
this occurs, remove one of the excess variables and use a single one.
Some initialization of variables are no longer needed and have been
removed.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Tony Nguyen [Thu, 7 Oct 2021 22:58:01 +0000 (15:58 -0700)]
ice: Remove enum ice_status
Replace uses of ice_status to, as equivalent as possible, error codes.
Remove enum ice_status and its helper conversion function as they are no
longer needed.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Tony Nguyen [Thu, 7 Oct 2021 22:56:57 +0000 (15:56 -0700)]
ice: Use int for ice_status
To prepare for removal of ice_status, change the variables from
ice_status to int. This eases the transition when values are changed to
return standard int error codes over enum ice_status.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Tony Nguyen [Thu, 7 Oct 2021 22:56:02 +0000 (15:56 -0700)]
ice: Remove string printing for ice_status
Remove the ice_stat_str() function which prints the string
representation of the ice_status error code. With upcoming changes
moving away from ice_status, there will be no need for this function.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Wojciech Drewek [Thu, 7 Oct 2021 22:54:37 +0000 (15:54 -0700)]
ice: Refactor status flow for DDP load
Before this change, final state of the DDP pkg load process was
dependent on many variables such as: ice_status, pkg version,
ice_aq_err. The last one had be stored in hw->pkg_dwnld_status.
It was impossible to conclude this state just from ice_status, that's
why logging process of DDP pkg load in the caller was a little bit
complicated.
With this patch new status enum is introduced - ice_ddp_state.
It covers all the possible final states of the loading process.
What's tricky for ice_ddp_state is that not only
ICE_DDP_PKG_SUCCESS(=0) means that load was successful. Actually
three states mean that:
- ICE_DDP_PKG_SUCCESS
- ICE_DDP_PKG_SAME_VERSION_ALREADY_LOADED
- ICE_DDP_PKG_COMPATIBLE_ALREADY_LOADED
ice_is_init_pkg_successful can tell that information.
One ddp_state should not be used outside of ice_init_pkg which is
ICE_DDP_PKG_ALREADY_LOADED. It is more generic, it is used in
ice_dwnld_cfg_bufs to see if pkg is already loaded. At this point
we can't use one of the specific one (SAME_VERSION, COMPATIBLE,
NOT_SUPPORTED) because we don't have information on the package
currently loaded in HW (we are before calling ice_get_pkg_info).
We can get rid of hw->pkg_dwnld_status because we are immediately
mapping aq errors to ice_ddp_state in ice_dwnld_cfg_bufs.
Other errors like ICE_ERR_NO_MEMORY, ICE_ERR_PARAM are mapped the
generic ICE_DDP_PKG_ERR.
Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Brett Creeley [Tue, 2 Mar 2021 18:15:34 +0000 (10:15 -0800)]
ice: Refactor promiscuous functions
Some of the promiscuous mode functions take a boolean to indicate
set/clear, which affects readability. Refactor and provide an
interface for the promiscuous mode code with explicit set and clear
promiscuous mode operations.
Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jeff Guo [Fri, 16 Jul 2021 22:16:43 +0000 (15:16 -0700)]
ice: refactor PTYPE validating
Since the capability of a PTYPE within a specific package could be
negotiated by checking the HW bit map, it means that there's no need
to maintain a different PTYPE list for each type of the package when
parsing PTYPE. So refactor the PTYPE validating mechanism.
Signed-off-by: Jeff Guo <jia.guo@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Haiyue Wang [Fri, 16 Jul 2021 22:16:42 +0000 (15:16 -0700)]
ice: Add package PTYPE enable information
Scan the 'Marker Ptype TCAM' section to retrieve the Rx parser PTYPE
enable information from the current package.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Dany Madden [Tue, 14 Dec 2021 05:17:48 +0000 (00:17 -0500)]
ibmvnic: remove unused defines
IBMVNIC_STATS_TIMEOUT and IBMVNIC_INIT_FAILED are not used in the driver.
Remove them.
Suggested-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Changcheng Deng [Tue, 14 Dec 2021 11:44:47 +0000 (11:44 +0000)]
pktgen: use min() to make code cleaner
Use min() in order to make code cleaner. Issue found by coccinelle.
Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
It seems that the DSA tagger-owned storage changes were insufficiently
tested and do not work in all cases. Specifically, the NXP Bluebox 3
(arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts) got broken by
these changes, because
(a) I forgot that DSA_TAG_PROTO_SJA1110 exists and differs from
DSA_TAG_PROTO_SJA1105
(b) the Bluebox 3 uses a DSA switch tree with 2 switches, and the
tagger-owned storage patches don't cover that use case well, it
seems
Therefore, I'm sorry to say that there needs to be an API fixup: tagging
protocol drivers will from now on connect to individual switches from a
tree, rather than to the tree as a whole. This is more robust against
various ordering constraints in the DSA probe and teardown paths, and is
also symmetrical with the connection API exposed to the switch drivers
themselves, which is also per switch.
With these changes, the Bluebox 3 also works fine.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 14 Dec 2021 01:45:36 +0000 (03:45 +0200)]
net: dsa: make tagging protocols connect to individual switches from a tree
On the NXP Bluebox 3 board which uses a multi-switch setup with sja1105,
the mechanism through which the tagger connects to the switch tree is
broken, due to improper DSA code design. At the time when tag_ops->connect()
is called in dsa_port_parse_cpu(), DSA hasn't finished "touching" all
the ports, so it doesn't know how large the tree is and how many ports
it has. It has just seen the first CPU port by this time. As a result,
this function will call the tagger's ->connect method too early, and the
tagger will connect only to the first switch from the tree.
This could be perhaps addressed a bit more simply by just moving the
tag_ops->connect(dst) call a bit later (for example in dsa_tree_setup),
but there is already a design inconsistency at present: on the switch
side, the notification is on a per-switch basis, but on the tagger side,
it is on a per-tree basis. Furthermore, the persistent storage itself is
per switch (ds->tagger_data). And the tagger connect and disconnect
procedures (at least the ones that exist currently) could see a fair bit
of simplification if they didn't have to iterate through the switches of
a tree.
To fix the issue, this change transforms tag_ops->connect(dst) into
tag_ops->connect(ds) and moves it somewhere where we already iterate
over all switches of a tree. That is in dsa_switch_setup_tag_protocol(),
which is a good placement because we already have there the connection
call to the switch side of things.
As for the dsa_tree_bind_tag_proto() method (called from the code path
that changes the tag protocol), things are a bit more complicated
because we receive the tree as argument, yet when we unwind on errors,
it would be nice to not call tag_ops->disconnect(ds) where we didn't
previously call tag_ops->connect(ds). We didn't have this problem before
because the tag_ops connection operations passed the entire dst before,
and this is more fine grained now. To solve the error rewind case using
the new API, we have to create yet one more cross-chip notifier for
disconnection, and stay connected with the old tag protocol to all the
switches in the tree until we've succeeded to connect with the new one
as well. So if something fails half way, the whole tree is still
connected to the old tagger. But there may still be leaks if the tagger
fails to connect to the 2nd out of 3 switches in a tree: somebody needs
to tell the tagger to disconnect from the first switch. Nothing comes
for free, and this was previously handled privately by the tagging
protocol driver before, but now we need to emit a disconnect cross-chip
notifier for that, because DSA has to take care of the unwind path. We
assume that the tagging protocol has connected to a switch if it has set
ds->tagger_data to something, otherwise we avoid calling its
disconnection method in the error rewind path.
The rest of the changes are in the tagging protocol drivers, and have to
do with the replacement of dst with ds. The iteration is removed and the
error unwind path is simplified, as mentioned above.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 14 Dec 2021 01:45:35 +0000 (03:45 +0200)]
net: dsa: sja1105: fix broken connection with the sja1110 tagger
The driver was incorrectly converted assuming that "sja1105" is the only
tagger supported by this driver. This results in SJA1110 switches
failing to probe:
sja1105 spi1.0: Unable to connect to tag protocol "sja1110": -EPROTONOSUPPORT
sja1105: probe of spi1.2 failed with error -93
Add DSA_TAG_PROTO_SJA1110 to the list of supported taggers by the
sja1105 driver. The sja1105_tagger_data structure format is common for
the two tagging protocols.
Fixes: c79e84866d2a ("net: dsa: tag_sja1105: convert to tagger-owned data") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 14 Dec 2021 01:45:34 +0000 (03:45 +0200)]
net: dsa: tag_sja1105: fix zeroization of ds->priv on tag proto disconnect
The method was meant to zeroize ds->tagger_data but got the wrong
pointer. Fix this.
Fixes: c79e84866d2a ("net: dsa: tag_sja1105: convert to tagger-owned data") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 14 Dec 2021 01:39:02 +0000 (17:39 -0800)]
ethtool: fix null-ptr-deref on ref tracker
dev can be a NULL here, not all requests set require_dev.
Fixes: e4b8954074f6 ("netlink: add net device refcount tracker to struct ethnl_req_info") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 14 Dec 2021 12:28:25 +0000 (12:28 +0000)]
Merge branch 'hwtstamp_bonding'
Hangbin Liu says:
====================
net: add new hwtstamp flag HWTSTAMP_FLAG_BONDED_PHC_INDEX
This patchset add a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX.
When user want to get bond active interface's PHC, they need to add this flag
and aware the PHC index may changed.
v3: Use bitwise test to check the flags validation
v2: rename the flag to HWTSTAMP_FLAG_BONDED_PHC_INDEX
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Fri, 10 Dec 2021 08:59:59 +0000 (16:59 +0800)]
Bonding: force user to add HWTSTAMP_FLAG_BONDED_PHC_INDEX when get/set HWTSTAMP
When there is a failover, the PHC index of bond active interface will be
changed. This may break the user space program if the author didn't aware.
By setting this flag, the user should aware that the PHC index get/set
by syscall is not stable. And the user space is able to deal with it.
Without this flag, the kernel will reject the request forwarding to
bonding.
Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Fri, 10 Dec 2021 08:59:58 +0000 (16:59 +0800)]
net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEX
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP
ioctl to active device") the user could get bond active interface's
PHC index directly. But when there is a failover, the bond active
interface will change, thus the PHC index is also changed. This may
break the user's program if they did not update the PHC timely.
This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX.
When the user wants to get the bond active interface's PHC, they need to
add this flag and be aware the PHC index may be changed.
With the new flag. All flag checks in current drivers are removed. Only
the checking in net_hwtstamp_validate() is kept.
Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Mon, 13 Dec 2021 11:23:22 +0000 (12:23 +0100)]
net: mtk_eth: add COMPILE_TEST support
Improve the build testing of mtk_eth drivers by enabling them when
COMPILE_TEST is selected. Moreover COMPILE_TEST will be useful
for the driver development.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dev: Always serialize on Qdisc::busylock in __dev_xmit_skb() on PREEMPT_RT.
The root-lock is dropped before dev_hard_start_xmit() is invoked and after
setting the __QDISC___STATE_RUNNING bit. If the Qdisc owner is preempted
by another sender/task with a higher priority then this new sender won't
be able to submit packets to the NIC directly instead they will be
enqueued into the Qdisc. The NIC will remain idle until the Qdisc owner
is scheduled again and finishes the job.
By serializing every task on the ->busylock then the task will be
preempted by a sender only after the Qdisc has no owner.
Always serialize on the busylock on PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Li [Mon, 13 Dec 2021 09:54:13 +0000 (17:54 +0800)]
mt76: remove variable set but not used
The code that uses variable queued has been removed,
and "mt76_is_usb(dev) ? q->ndesc - q->queued : q->queued"
didn't do anything, so all they should be removed as well.
Eliminate the following clang warnings:
drivers/net/wireless/mediatek/mt76/debugfs.c:77:9: warning: variable
‘queued’ set but not used.
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 2d8be76c1674 ("mt76: debugfs: improve queue node readability") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Sat, 11 Dec 2021 21:44:20 +0000 (22:44 +0100)]
net: lan966x: Fix the configuration of the pcs
When inserting a SFP that runs at 2.5G, then the Serdes was still
configured to run at 1G. Because the config->speed was 0, and then the
speed of the serdes was not configured at all, it was using the default
value which is 1G. This patch stop calling the serdes function set_speed
and allow the serdes to figure out the speed based on the interface
type.
Fixes: d28d6d2e37d10d ("net: lan966x: add port module support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 13 Dec 2021 14:15:41 +0000 (14:15 +0000)]
Merge branch 'mse102x-support'
Stefan Wahren says:
====================
add Vertexcom MSE102x support
This patch series adds support for the Vertexcom MSE102x Homeplug GreenPHY
chips [1]. They can be connected either via RGMII, RMII or SPI to a host CPU.
These patches handles only the last one, with an Ethernet over SPI protocol
driver.
The code has been tested only on Raspberry Pi boards, but should work
on other platforms.
Changes in V3:
- drop IF_PORT_HOMEPLUG again, since it's actually not used
Changes in V2:
- improve lock handling for RX & TX path
- add new patch to introduce IF_PORT_HOMEPLUG as suggested by Andrew Lunn
- address all the comments by Jakub Kicinski, Andrew Lunn, Kernel test robot
net: mvneta: mark as a legacy_pre_march2020 driver
mvneta provides mac_an_restart and mac_pcs_get_state methods, so needs
to be marked as a legacy driver. Marek spotted that mvneta had stopped
working in 2500base-X mode - thanks for reporting.
Reported-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Sun, 12 Dec 2021 07:12:04 +0000 (15:12 +0800)]
isdn: cpai: no need to initialise statics to 0
Static variables do not need to be initialised to 0, because compiler
will initialise all uninitialised statics to 0. Thus, remove the
unneeded initializations.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Fri, 10 Dec 2021 22:31:23 +0000 (16:31 -0600)]
net: ipa: fix IPA v4.5 interconnect data
Update the definition of the IPA interconnects for IPA v4.5 so
the path between IPA and system memory is represented by a single
"memory" interconnect.
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
The first two interconnects defined for IPA on the SDX55 SoC are
really two parts of what should be represented as a single path
between IPA and system memory.
Fix this by combining the "memory-a" and "memory-b" interconnects
into a single "memory" interconnect.
Reported-by: David Heidelberg <david@ixit.cz> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Joanne Koong [Fri, 10 Dec 2021 20:40:23 +0000 (12:40 -0800)]
net: Enable max_dgram_qlen unix sysctl to be configurable by non-init user namespaces
This patch enables the "/proc/sys/net/unix/max_dgram_qlen" sysctl to be
exposed to non-init user namespaces. max_dgram_qlen is used as the default
"sk_max_ack_backlog" value for when a unix socket is created.
Currently, when a networking namespace is initialized, its unix sysctls
are exposed only if the user namespace that "owns" it is the init user
namespace. If there is an non-init user namespace that "owns" a networking
namespace (for example, in the case after we call clone() with both
CLONE_NEWUSER and CLONE_NEWNET set), the sysctls are hidden from view
and not configurable.
Exposing the unix sysctl is safe because any changes made to it will be
limited in scope to the networking namespace the non-init user namespace
"owns" and has privileges over (changes won't affect any other net
namespace). There is also no possibility of a non-privileged user namespace
messing up the net namespace sysctls it shares with its parent user namespace.
When a new user namespace is created without unsharing the network namespace
(eg calling clone() with CLONE_NEWUSER), the new user namespace shares its
parent's network namespace. Write access is protected by the mode set
in the sysctl's ctl_table (and enforced by procfs). Here in the case of
"max_dgram_qlen", 0644 is set; only the user owner has write access.
v1 -> v2:
* Add more detail to commit message, specify the
"/proc/sys/net/unix/max_dgram_qlen" sysctl in commit message.
Signed-off-by: Joanne Koong <joannekoong@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
u64_stats: Disable preemption on 32bit UP+SMP PREEMPT_RT during updates.
On PREEMPT_RT the seqcount_t for synchronisation is required on 32bit
architectures even on UP because the softirq (and the threaded IRQ handler) can
be preempted.
With the seqcount_t for synchronisation, a reader with higher priority can
preempt the writer and then spin endlessly in read_seqcount_begin() while the
writer can't make progress.
To avoid such a lock up on PREEMPT_RT the writer must disable preemption during
the update. There is no need to disable interrupts because no writer is using
this API in hard-IRQ context on PREEMPT_RT.
Disable preemption on 32bit-RT within the u64_stats write section.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 13 Dec 2021 12:34:10 +0000 (12:34 +0000)]
Merge branch 'bareudp-remove-unused'
Guillaume Nault says:
====================
bareudp: Remove unused code from header file
Stop exporting unused functions and structures in bareudp.h. The only
piece of bareudp.h that is actually used is netif_is_bareudp(). The
rest can be moved to bareudp.c or even dropped entirely.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xiaoliang Yang [Wed, 8 Dec 2021 10:06:51 +0000 (18:06 +0800)]
net: stmmac: bump tc when get underflow error from DMA descriptor
In DMA threshold mode, frame underflow errors may sometimes occur when
the TC(threshold control) value is not enough. The TC value need to be
bumped up in this case.
There is no underflow interrupt bit on DMA_CH(#i)_Status of dwmac4, so
the DMA threshold cannot be bumped up in stmmac_dma_interrupt(). The
i.mx8mp board observed an underflow error while running NFS boot, the
NFS rootfs could not be mounted.
The underflow error can be got from the DMA descriptor TDES3 on dwmac4.
This patch bump up tc value once underflow error is got from TDES3.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 12 Dec 2021 12:51:34 +0000 (12:51 +0000)]
Merge branch 'dsa-tagger-storage'
Vladimir Oltean says:
====================
Replace DSA dp->priv with tagger-owned storage
Ansuel's recent work on qca8k register access over Ethernet:
https://patchwork.kernel.org/project/netdevbpf/cover/20211207145942.7444-1-ansuelsmth@gmail.com/
has triggered me to do something which I should've done for a longer
time:
https://patchwork.kernel.org/project/netdevbpf/patch/20211109095013.27829-7-martin.kaistra@linutronix.de/#24585521
which is to replace dp->priv with something that has less caveats.
The dp->priv was introduced when sja1105 needed to hold stateful
information in the tagging protocol driver. In that design, dp->priv
held memory allocated by the switch driver, because the tagging protocol
driver design was 100% stateless.
Some years have passed and others have started to feel the need for
stateful information kept by the tagger, as well as passing data back
and forth between the tagging protocol driver and the switch driver.
This isn't possible cleanly in DSA due to a circular dependency which
leads to broken module autoloading:
https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/
This patchset introduces a framework that resembles something normal,
which allows data to be passed from the tagging protocol driver (things
like switch management packets, which aren't intended for the network
stack) to the switch driver, while the tagging protocol still remains
more or less stateless. The overall design of the framework was
discussed with Ansuel too and it appears to be flexible enough to cover
the "register access over Ethernet" use case. Additionally, the existing
uses of dp->priv, which have mainly to do with PTP timestamping, have
also been migrated.
Changes in v2:
Fix transient build breakage in patch 5/11 due to a missing parenthesis,
https://patchwork.hopto.org/static/nipa/592567/12665213/build_clang/
and another transient build warning in patch 4/11 that for some reason
doesn't appear in my W=1 C=1 build.
https://patchwork.hopto.org/static/nipa/592567/12665209/build_clang/stderr
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 9 Dec 2021 23:34:47 +0000 (01:34 +0200)]
net: dsa: remove dp->priv
All current in-tree uses of dp->priv have been replaced with
ds->tagger_data, which provides for a safer API especially when the
connection isn't the regular 1:1 link between one switch driver and one
tagging protocol driver, but could be either one switch to many taggers,
or many switches to one tagger.
Therefore, we can remove this unused pointer.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 9 Dec 2021 23:34:46 +0000 (01:34 +0200)]
net: dsa: tag_sja1105: split sja1105_tagger_data into private and public sections
The sja1105 driver messes with the tagging protocol's state when PTP RX
timestamping is enabled/disabled. This is fundamentally necessary
because the tagger needs to know what to do when it receives a PTP
packet. If RX timestamping is enabled, then a metadata follow-up frame
is expected, and this holds the (partial) timestamp. So the tagger plays
hide-and-seek with the network stack until it also gets the metadata
frame, and then presents a single packet, the timestamped PTP packet.
But when RX timestamping isn't enabled, there is no metadata frame
expected, so the hide-and-seek game must be turned off and the packet
must be delivered right away to the network stack.
Considering this, we create a pseudo isolation by devising two tagger
methods callable by the switch: one to get the RX timestamping state,
and one to set it. Since we can't export symbols between the tagger and
the switch driver, these methods are exposed through function pointers.
After this change, the public portion of the sja1105_tagger_data
contains only function pointers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The above change was done to avoid calling symbols exported by the
switch driver from the tagging protocol driver.
With the tagger-owned storage model, we have a new option on our hands,
and that is for the switch driver to provide a data consumer handler in
the form of a function pointer inside the ->connect_tag_protocol()
method. Having a function pointer avoids the problems of the exported
symbols approach.
By creating a handler for metadata frames holding TX timestamps on
SJA1110, we are able to eliminate an skb queue from the tagger data, and
replace it with a simple, and stateless, function pointer. This skb
queue is now handled exclusively by sja1105_ptp.c, which makes the code
easier to follow, as it used to be before the reverted patch.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 9 Dec 2021 23:34:44 +0000 (01:34 +0200)]
net: dsa: tag_sja1105: convert to tagger-owned data
Currently, struct sja1105_tagger_data is a part of struct
sja1105_private, and is used by the sja1105 driver to populate dp->priv.
With the movement towards tagger-owned storage, the sja1105 driver
should not be the owner of this memory.
This change implements the connection between the sja1105 switch driver
and its tagging protocol, which means that sja1105_tagger_data no longer
stays in dp->priv but in ds->tagger_data, and that the sja1105 driver
now only populates the sja1105_port_deferred_xmit callback pointer.
The kthread worker is now the responsibility of the tagger.
The sja1105 driver also alters the tagger's state some more, especially
with regard to the PTP RX timestamping state. This will be fixed up a
bit in further changes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 9 Dec 2021 23:34:43 +0000 (01:34 +0200)]
net: dsa: sja1105: move ts_id from sja1105_tagger_data
The TX timestamp ID is incremented by the SJA1110 PTP timestamping
callback (->port_tx_timestamp) for every packet, when cloning it.
It isn't used by the tagger at all, even though it sits inside the
struct sja1105_tagger_data.
Also, serialization to this structure is currently done through
tagger_data->meta_lock, which is a cheap hack because the meta_lock
isn't used for anything else on SJA1110 (sja1105_rcv_meta_state_machine
isn't called).
This change moves ts_id from sja1105_tagger_data to sja1105_private and
introduces a dedicated spinlock for it, also in sja1105_private.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 9 Dec 2021 23:34:42 +0000 (01:34 +0200)]
net: dsa: sja1105: make dp->priv point directly to sja1105_tagger_data
The design of the sja1105 tagger dp->priv is that each port has a
separate struct sja1105_port, and the sp->data pointer points to a
common struct sja1105_tagger_data.
We have removed all per-port members accessible by the tagger, and now
only struct sja1105_tagger_data remains. Make dp->priv point directly to
this.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 9 Dec 2021 23:34:40 +0000 (01:34 +0200)]
net: dsa: sja1105: bring deferred xmit implementation in line with ocelot-8021q
When the ocelot-8021q driver was converted to deferred xmit as part of
commit 8d5f7954b7c8 ("net: dsa: felix: break at first CPU port during
init and teardown"), the deferred implementation was deliberately made
subtly different from what sja1105 has.
The implementation differences lied on the following observations:
- There might be a race between these two lines in tag_sja1105.c:
and the skb dequeue logic in sja1105_port_deferred_xmit(). For
example, the xmit_work might be already queued, however the work item
has just finished walking through the skb queue. Because we don't
check the return code from kthread_queue_work, we don't do anything if
the work item is already queued.
However, nobody will take that skb and send it, at least until the
next timestampable skb is sent. This creates additional (and
avoidable) TX timestamping latency.
To close that race, what the ocelot-8021q driver does is it doesn't
keep a single work item per port, and a skb timestamping queue, but
rather dynamically allocates a work item per packet.
- It is also unnecessary to have more than one kthread that does the
work. So delete the per-port kthread allocations and replace them with
a single kthread which is global to the switch.
This change brings the two implementations in line by applying those
observations to the sja1105 driver as well.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 9 Dec 2021 23:34:39 +0000 (01:34 +0200)]
net: dsa: sja1105: let deferred packets time out when sent to ports going down
This code is not necessary and complicates the conversion of this driver
to tagger-owned memory. If there is a PTP packet that is sent
concurrently with the port getting disabled, the deferred xmit mechanism
is robust enough to time out when it sees that it hasn't been delivered,
and recovers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 9 Dec 2021 23:34:38 +0000 (01:34 +0200)]
net: dsa: tag_ocelot: convert to tagger-owned data
The felix driver makes very light use of dp->priv, and the tagger is
effectively stateless. dp->priv is practically only needed to set up a
callback to perform deferred xmit of PTP and STP packets using the
ocelot-8021q tagging protocol (the main ocelot tagging protocol makes no
use of dp->priv, although this driver sets up dp->priv irrespective of
actual tagging protocol in use).
struct felix_port (what used to be pointed to by dp->priv) is removed
and replaced with a two-sided structure. The public side of this
structure, visible to the switch driver, is ocelot_8021q_tagger_data.
The private side is ocelot_8021q_tagger_private, and the latter
structure physically encapsulates the former. The public half of the
tagger data structure can be accessed through a helper of the same name
(ocelot_8021q_tagger_data) which also sanity-checks the protocol
currently in use by the switch. The public/private split was requested
by Andrew Lunn.
Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 9 Dec 2021 23:34:37 +0000 (01:34 +0200)]
net: dsa: introduce tagger-owned storage for private and shared data
Ansuel is working on register access over Ethernet for the qca8k switch
family. This requires the qca8k tagging protocol driver to receive
frames which aren't intended for the network stack, but instead for the
qca8k switch driver itself.
The dp->priv is currently the prevailing method for passing data back
and forth between the tagging protocol driver and the switch driver.
However, this method is riddled with caveats.
The DSA design allows in principle for any switch driver to return any
protocol it desires in ->get_tag_protocol(). The dsa_loop driver can be
modified to do just that. But in the current design, the memory behind
dp->priv has to be allocated by the switch driver, so if the tagging
protocol is paired to an unexpected switch driver, we may end up in NULL
pointer dereferences inside the kernel, or worse (a switch driver may
allocate dp->priv according to the expectations of a different tagger).
The latter possibility is even more plausible considering that DSA
switches can dynamically change tagging protocols in certain cases
(dsa <-> edsa, ocelot <-> ocelot-8021q), and the current design lends
itself to mistakes that are all too easy to make.
This patch proposes that the tagging protocol driver should manage its
own memory, instead of relying on the switch driver to do so.
After analyzing the different in-tree needs, it can be observed that the
required tagger storage is per switch, therefore a ds->tagger_data
pointer is introduced. In principle, per-port storage could also be
introduced, although there is no need for it at the moment. Future
changes will replace the current usage of dp->priv with ds->tagger_data.
We define a "binding" event between the DSA switch tree and the tagging
protocol. During this binding event, the tagging protocol's ->connect()
method is called first, and this may allocate some memory for each
switch of the tree. Then a cross-chip notifier is emitted for the
switches within that tree, and they are given the opportunity to fix up
the tagger's memory (for example, they might set up some function
pointers that represent virtual methods for consuming packets).
Because the memory is owned by the tagger, there exists a ->disconnect()
method for the tagger (which is the place to free the resources), but
there doesn't exist a ->disconnect() method for the switch driver.
This is part of the design. The switch driver should make minimal use of
the public part of the tagger data, and only after type-checking it
using the supplied "proto" argument.
In the code there are in fact two binding events, one is the initial
event in dsa_switch_setup_tag_protocol(). At this stage, the cross chip
notifier chains aren't initialized, so we call each switch's connect()
method by hand. Then there is dsa_tree_bind_tag_proto() during
dsa_tree_change_tag_proto(), and here we have an old protocol and a new
one. We first connect to the new one before disconnecting from the old
one, to simplify error handling a bit and to ensure we remain in a valid
state at all times.
Co-developed-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
If sw1p{1,2} are added to a bridge that sw0p1 is not a part of, sw0
still needs to add a crosschip PVT entry for the virtual DSA device
assigned to represent the bridge.
Fixes: ce5df6894a57 ("net: dsa: mv88e6xxx: map virtual bridges with forwarding offload in the PVT") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
xu xin [Wed, 8 Dec 2021 08:58:44 +0000 (08:58 +0000)]
net: Enable neighbor sysctls that is save for userns root
Inside netns owned by non-init userns, sysctls about ARP/neighbor is
currently not visible and configurable.
For the attributes these sysctls correspond to, any modifications make
effects on the performance of networking(ARP, especilly) only in the
scope of netns, which does not affect other netns.
Actually, some tools via netlink can modify these attribute. iproute2 is
an example. see as follows:
$ unshare -ur -n
$ cat /proc/sys/net/ipv4/neigh/lo/retrans_time
cat: can't open '/proc/sys/net/ipv4/neigh/lo/retrans_time': No such file
or directory
$ ip ntable show dev lo
inet arp_cache
dev lo
refcnt 1 reachable 19494 base_reachable 30000 retrans 1000
gc_stale 60000 delay_probe 5000 queue 101
app_probes 0 ucast_probes 3 mcast_probes 3
anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 1000
====================
Add FDMA support on ocelot switch driver
This series adds support for the Frame DMA present on the VSC7514
switch. The FDMA is able to extract and inject packets on the various
ethernet interfaces present on the switch.
====================
Clément Léger [Thu, 9 Dec 2021 15:49:11 +0000 (16:49 +0100)]
net: ocelot: add FDMA support
Ethernet frames can be extracted or injected autonomously to or from
the device’s DDR3/DDR3L memory and/or PCIe memory space. Linked list
data structures in memory are used for injecting or extracting Ethernet
frames. The FDMA generates interrupts when frame extraction or
injection is done and when the linked lists need updating.
The FDMA is shared between all the ethernet ports of the switch and
uses a linked list of descriptors (DCB) to inject and extract packets.
Before adding descriptors, the FDMA channels must be stopped. It would
be inefficient to do that each time a descriptor would be added so the
channels are restarted only once they stopped.
Both channels uses ring-like structure to feed the DCBs to the FDMA.
head and tail are never touched by hardware and are completely handled
by the driver. On top of that, page recycling has been added and is
mostly taken from gianfar driver.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Co-developed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clément Léger [Thu, 9 Dec 2021 15:49:10 +0000 (16:49 +0100)]
net: ocelot: add support for ndo_change_mtu
This commit adds support for changing MTU for the ocelot register based
interface. For ocelot, JUMBO frame size can be set up to 25000 bytes
but has been set to 9000 which is a saner value and allows for maximum
gain of performance with FDMA.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clément Léger [Thu, 9 Dec 2021 15:49:09 +0000 (16:49 +0100)]
net: ocelot: add and export ocelot_ptp_rx_timestamp()
In order to support PTP in FDMA, PTP handling code is needed. Since
this is the same as for register-based extraction, export it with
a new ocelot_ptp_rx_timestamp() function.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clément Léger [Thu, 9 Dec 2021 15:49:08 +0000 (16:49 +0100)]
net: ocelot: export ocelot_ifh_port_set() to setup IFH
FDMA will need this code to prepare the injection frame header when
sending SKBs. Move this code into ocelot_ifh_port_set() and add
conditional IFH setting for vlan and rew op if they are not set.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch series brings in IOSM driver improvments.
PATCH1: Set tx queue len.
PATCH2: Release data channel if there is no active IP session.
PATCH3: Removes dead code.
PATCH4: Correct open parenthesis alignment.
====================
Colin Foster [Thu, 9 Dec 2021 07:40:10 +0000 (23:40 -0800)]
net: ocelot: fix missed include in the vsc7514_regs.h file
commit 32ecd22ba60b ("net: mscc: ocelot: split register definitions to a
separate file") left out an include for <soc/mscc/ocelot_vcap.h>. It was
missed because the only consumer was ocelot_vsc7514.h, which already
included ocelot_vcap.
Fixes: 32ecd22ba60b ("net: mscc: ocelot: split register definitions to a separate file") Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211209074010.1813010-1-colin.foster@in-advantage.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Erik Ekman [Wed, 8 Dec 2021 23:00:22 +0000 (00:00 +0100)]
net: bna: Update supported link modes
The BR-series installation guide from https://driverdownloads.qlogic.com/
mentions the cards support 10Gbase-SR/LR as well as direct attach cables.
The cards only have SFP+ ports, so 10000baseT is not the right mode.
Switch to using more specific link modes added in commit 5711a98221443
("net: ethtool: add support for 1000BaseX and missing 10G link modes").
We've added 115 non-merge commits during the last 26 day(s) which contain
a total of 182 files changed, 5747 insertions(+), 2564 deletions(-).
The main changes are:
1) Various samples fixes, from Alexander Lobakin.
2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov.
3) A batch of new unified APIs for libbpf, logging improvements, version
querying, etc. Also a batch of old deprecations for old APIs and various
bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko.
4) BPF documentation reorganization and improvements, from Christoph Hellwig
and Dave Tucker.
5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in
libbpf, from Hengqi Chen.
6) Verifier log fixes, from Hou Tao.
7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong.
8) Extend branch record capturing to all platforms that support it,
from Kajol Jain.
9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi.
10) bpftool doc-generating script improvements, from Quentin Monnet.
11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet.
12) Deprecation warning fix for perf/bpf_counter, from Song Liu.
13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf,
from Tiezhu Yang.
14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song.
15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe
Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun,
and others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits)
libbpf: Add "bool skipped" to struct bpf_map
libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr()
selftests/bpf: Add test for libbpf's custom log_buf behavior
selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load()
libbpf: Deprecate bpf_object__load_xattr()
libbpf: Add per-program log buffer setter and getter
libbpf: Preserve kernel error code and remove kprobe prog type guessing
libbpf: Improve logging around BPF program loading
libbpf: Allow passing user log setting through bpf_object_open_opts
libbpf: Allow passing preallocated log_buf when loading BTF into kernel
libbpf: Add OPTS-based bpf_btf_load() API
libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
samples/bpf: Remove unneeded variable
bpf: Remove redundant assignment to pointer t
selftests/bpf: Fix a compilation warning
perf/bpf_counter: Use bpf_map_create instead of bpf_create_map
samples: bpf: Fix 'unknown warning group' build warning on Clang
samples: bpf: Fix xdp_sample_user.o linking with Clang
...
====================
Shuyi Cheng [Fri, 10 Dec 2021 09:39:57 +0000 (17:39 +0800)]
libbpf: Add "bool skipped" to struct bpf_map
Fix error: "failed to pin map: Bad file descriptor, path:
/sys/fs/bpf/_rodata_str1_1."
In the old kernel, the global data map will not be created, see [0]. So
we should skip the pinning of the global data map to avoid
bpf_object__pin_maps returning error. Therefore, when the map is not
created, we mark “map->skipped" as true and then check during relocation
and during pinning.
Fixes: 16e0c35c6f7a ("libbpf: Load global data maps lazily on legacy kernels") Signed-off-by: Shuyi Cheng <chengshuyi@linux.alibaba.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Vincent Minet [Fri, 10 Dec 2021 06:31:12 +0000 (07:31 +0100)]
libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
The btf__dedup_deprecated name was misspelled in the definition of the
compat symbol for btf__dedup. This leads it to be missing from the
shared library.
Merge branch 'Enhance and rework logging controls in libbpf'
Andrii Nakryiko says:
====================
Add new open options and per-program setters to control BTF and program
loading log verboseness and allow providing custom log buffers to capture logs
of interest. Note how custom log_buf and log_level are orthogonal, which
matches previous (alas less customizable) behavior of libbpf, even though it
sort of worked by accident: if someone specified log_level = 1 in
bpf_object__load_xattr(), first attempt to load any BPF program resulted in
wasted bpf() syscall with -EINVAL due to !!log_buf != !!log_level. Then on
retry libbpf would allocated log_buffer and try again, after which prog
loading would succeed and libbpf would print verbose program loading log
through its print callback.
This behavior is now documented and made more efficient, not wasting
unnecessary syscall. But additionally, log_level can be controlled globally on
a per-bpf_object level through bpf_object_open_opts, as well as on
a per-program basis with bpf_program__set_log_buf() and
bpf_program__set_log_level() APIs.
Now that we have a more future-proof way to set log_level, deprecate
bpf_object__load_xattr().
v2->v3:
- added log_buf selftests for bpf_prog_load() and bpf_btf_load();
- fix !log_buf in bpf_prog_load (John);
- fix log_level==0 in bpf_btf_load (thanks selftest!);
Andrii Nakryiko [Thu, 9 Dec 2021 19:38:40 +0000 (11:38 -0800)]
bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
Switch all the uses of to-be-deprecated bpf_object__load_xattr() into
a simple bpf_object__load() calls with optional log_level passed through
open_opts.kernel_log_level, if -d option is specified.
Andrii Nakryiko [Thu, 9 Dec 2021 19:38:38 +0000 (11:38 -0800)]
selftests/bpf: Add test for libbpf's custom log_buf behavior
Add a selftest that validates that per-program and per-object log_buf
overrides work as expected. Also test same logic for low-level
bpf_prog_load() and bpf_btf_load() APIs.
Andrii Nakryiko [Thu, 9 Dec 2021 19:38:36 +0000 (11:38 -0800)]
libbpf: Deprecate bpf_object__load_xattr()
Deprecate non-extensible bpf_object__load_xattr() in v0.8 ([0]).
With log_level control through bpf_object_open_opts or
bpf_program__set_log_level(), we are finally at the point where
bpf_object__load_xattr() doesn't provide any functionality that can't be
accessed through other (better) ways. The other feature,
target_btf_path, is also controllable through bpf_object_open_opts.
Andrii Nakryiko [Thu, 9 Dec 2021 19:38:35 +0000 (11:38 -0800)]
libbpf: Add per-program log buffer setter and getter
Allow to set user-provided log buffer on a per-program basis ([0]). This
gives great deal of flexibility in terms of which programs are loaded
with logging enabled and where corresponding logs go.
Log buffer set with bpf_program__set_log_buf() overrides kernel_log_buf
and kernel_log_size settings set at bpf_object open time through
bpf_object_open_opts, if any.
Adjust bpf_object_load_prog_instance() logic to not perform own log buf
allocation and load retry if custom log buffer is provided by the user.
Andrii Nakryiko [Thu, 9 Dec 2021 19:38:34 +0000 (11:38 -0800)]
libbpf: Preserve kernel error code and remove kprobe prog type guessing
Instead of rewriting error code returned by the kernel of prog load with
libbpf-sepcific variants pass through the original error.
There is now also no need to have a backup generic -LIBBPF_ERRNO__LOAD
fallback error as bpf_prog_load() guarantees that errno will be properly
set no matter what.
Also drop a completely outdated and pretty useless BPF_PROG_TYPE_KPROBE
guess logic. It's not necessary and neither it's helpful in modern BPF
applications.
Andrii Nakryiko [Thu, 9 Dec 2021 19:38:33 +0000 (11:38 -0800)]
libbpf: Improve logging around BPF program loading
Add missing "prog '%s': " prefixes in few places and use consistently
markers for beginning and end of program load logs. Here's an example of
log output:
81: (63) *(u32 *)(r4 +0) = r5
R1_w=map_value(id=0,off=16,ks=4,vs=20,imm=0) R4=map_value(id=0,off=400,ks=4,vs=16,imm=0)
invalid access to map value, value_size=16 off=400 size=4
R4 min value is outside of the allowed memory range
processed 63 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
-- END PROG LOAD LOG --
libbpf: failed to load program 'handler'
libbpf: failed to load object 'test_skeleton'
The entire verifier log, including BEGIN and END markers are now always
youtput during a single print callback call. This should make it much
easier to post-process or parse it, if necessary. It's not an explicit
API guarantee, but it can be reasonably expected to stay like that.
Also __bpf_object__open is renamed to bpf_object_open() as it's always
an adventure to find the exact function that implements bpf_object's
open phase, so drop the double underscored and use internal libbpf
naming convention.
Andrii Nakryiko [Thu, 9 Dec 2021 19:38:32 +0000 (11:38 -0800)]
libbpf: Allow passing user log setting through bpf_object_open_opts
Allow users to provide their own custom log_buf, log_size, and log_level
at bpf_object level through bpf_object_open_opts. This log_buf will be
used during BTF loading. Subsequent patch will use same log_buf during
BPF program loading, unless overriden at per-bpf_program level.
When such custom log_buf is provided, libbpf won't be attempting
retrying loading of BTF to try to provide its own log buffer to capture
kernel's error log output. User is responsible to provide big enough
buffer, otherwise they run a risk of getting -ENOSPC error from the
bpf() syscall.
See also comments in bpf_object_open_opts regarding log_level and
log_buf interactions.
Andrii Nakryiko [Thu, 9 Dec 2021 19:38:31 +0000 (11:38 -0800)]
libbpf: Allow passing preallocated log_buf when loading BTF into kernel
Add libbpf-internal btf_load_into_kernel() that allows to pass
preallocated log_buf and custom log_level to be passed into kernel
during BPF_BTF_LOAD call. When custom log_buf is provided,
btf_load_into_kernel() won't attempt an retry with automatically
allocated internal temporary buffer to capture BTF validation log.
It's important to note the relation between log_buf and log_level, which
slightly deviates from stricter kernel logic. From kernel's POV, if
log_buf is specified, log_level has to be > 0, and vice versa. While
kernel has good reasons to request such "sanity, this, in practice, is
a bit unconvenient and restrictive for libbpf's high-level bpf_object APIs.
So libbpf will allow to set non-NULL log_buf and log_level == 0. This is
fine and means to attempt to load BTF without logging requested, but if
it failes, retry the load with custom log_buf and log_level 1. Similar
logic will be implemented for program loading. In practice this means
that users can provide custom log buffer just in case error happens, but
not really request slower verbose logging all the time. This is also
consistent with libbpf behavior when custom log_buf is not set: libbpf
first tries to load everything with log_level=0, and only if error
happens allocates internal log buffer and retries with log_level=1.
Also, while at it, make BTF validation log more obvious and follow the log
pattern libbpf is using for dumping BPF verifier log during
BPF_PROG_LOAD. BTF loading resulting in an error will look like this:
libbpf: BTF loading error: -22
libbpf: -- BEGIN BTF LOAD LOG ---
magic: 0xeb9f
version: 1
flags: 0x0
hdr_len: 24
type_off: 0
type_len: 1040
str_off: 1040
str_len: 2063598257
btf_total_size: 1753
Total section length too long
-- END BTF LOAD LOG --
libbpf: Error loading .BTF into kernel: -22. BTF is optional, ignoring.
This makes it much easier to find relevant parts in libbpf log output.
Andrii Nakryiko [Thu, 9 Dec 2021 19:38:30 +0000 (11:38 -0800)]
libbpf: Add OPTS-based bpf_btf_load() API
Similar to previous bpf_prog_load() and bpf_map_create() APIs, add
bpf_btf_load() API which is taking optional OPTS struct. Schedule
bpf_load_btf() for deprecation in v0.8 ([0]).
This makes naming consistent with BPF_BTF_LOAD command, sets up an API
for extensibility in the future, moves options parameters (log-related
fields) into optional options, and also allows to pass log_level
directly.
It also removes log buffer auto-allocation logic from low-level API
(consistent with bpf_prog_load() behavior), but preserves a special
treatment of log_level == 0 with non-NULL log_buf, which matches
low-level bpf_prog_load() and high-level libbpf APIs for BTF and program
loading behaviors.
Andrii Nakryiko [Thu, 9 Dec 2021 19:38:29 +0000 (11:38 -0800)]
libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
To unify libbpf APIs behavior w.r.t. log_buf and log_level, fix
bpf_prog_load() to follow the same logic as bpf_btf_load() and
high-level bpf_object__load() API will follow in the subsequent patches:
- if log_level is 0 and non-NULL log_buf is provided by a user, attempt
load operation initially with no log_buf and log_level set;
- if successful, we are done, return new FD;
- on error, retry the load operation with log_level bumped to 1 and
log_buf set; this way verbose logging will be requested only when we
are sure that there is a failure, but will be fast in the
common/expected success case.
Of course, user can still specify log_level > 0 from the very beginning
to force log collection.
====================
net: netns refcount tracking, base series
We have 100+ syzbot reports about netns being dismantled too soon,
still unresolved as of today.
We think a missing get_net() or an extra put_net() is the root cause.
In order to find the bug(s), and be able to spot future ones,
this patch adds CONFIG_NET_NS_REFCNT_TRACKER and new helpers
to precisely pair all put_net() with corresponding get_net().
To use these helpers, each data structure owning a refcount
should also use a "netns_tracker" to pair the get() and put().
Small sections of codes where the get()/put() are in sight
do not need to have a tracker, because they are short lived,
but in theory it is also possible to declare an on-stack tracker.
v2: Include core networking patches only.
====================
Eric Dumazet [Fri, 10 Dec 2021 07:44:21 +0000 (23:44 -0800)]
net: add networking namespace refcount tracker
We have 100+ syzbot reports about netns being dismantled too soon,
still unresolved as of today.
We think a missing get_net() or an extra put_net() is the root cause.
In order to find the bug(s), and be able to spot future ones,
this patch adds CONFIG_NET_NS_REFCNT_TRACKER and new helpers
to precisely pair all put_net() with corresponding get_net().
To use these helpers, each data structure owning a refcount
should also use a "netns_tracker" to pair the get and put.
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / mirror_ubuntu-kernels.git / log