Reason is that there is no Xen pv trap entry for X86_TRAP_VC.
Fix that by adding a generic trap handler for unknown traps and wire all
unknown bare metal handlers to this generic handler, which will just
crash the system in case such a trap will ever happen.
Fixes: 0786138c78e793 ("x86/sev-es: Add a Runtime #VC Exception Handler") Cc: <stable@vger.kernel.org> # v5.10 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
David Woodhouse [Tue, 26 Jan 2021 17:01:49 +0000 (17:01 +0000)]
xen: Fix XenStore initialisation for XS_LOCAL
In commit 3499ba8198ca ("xen: Fix event channel callback via INTX/GSI")
I reworked the triggering of xenbus_probe().
I tried to simplify things by taking out the workqueue based startup
triggered from wake_waiting(); the somewhat poorly named xenbus IRQ
handler.
I missed the fact that in the XS_LOCAL case (Dom0 starting its own
xenstored or xenstore-stubdom, which happens after the kernel is booted
completely), that IRQ-based trigger is still actually needed.
So... put it back, except more cleanly. By just spawning a xenbus_probe
thread which waits on xb_waitq and runs the probe the first time it
gets woken, just as the workqueue-based hack did.
This is actually a nicer approach for *all* the back ends with different
interrupt methods, and we can switch them all over to that without the
complex conditions for when to trigger it. But not in -rc6. This is
the minimal fix for the regression, although it's a step in the right
direction instead of doing a partial revert and actually putting the
workqueue back. It's also simpler than the workqueue.
Roger Pau Monne [Tue, 19 Jan 2021 10:57:27 +0000 (11:57 +0100)]
xen-blkfront: allow discard-* nodes to be optional
This is inline with the specification described in blkif.h:
* discard-granularity: should be set to the physical block size if
node is not present.
* discard-alignment, discard-secure: should be set to 0 if node not
present.
This was detected as QEMU would only create the discard-granularity
node but not discard-alignment, and thus the setup done in
blkfront_setup_discard would fail.
Fix blkfront_setup_discard to not fail on missing nodes, and also fix
blkif_set_queue_limits to set the discard granularity to the physical
block size if none is specified in xenbus.
Fixes: ed30bf317c5ce ('xen-blkfront: Handle discard requests.') Reported-by: Arthur Borsboom <arthurborsboom@gmail.com> Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Tested-By: Arthur Borsboom <arthurborsboom@gmail.com> Link: https://lore.kernel.org/r/20210119105727.95173-1-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com>
Randy Dunlap [Fri, 15 Jan 2021 19:11:23 +0000 (11:11 -0800)]
x86/xen: fix 'nopvspin' build error
Fix build error in x86/xen/ when PARAVIRT_SPINLOCKS is not enabled.
Fixes this build error:
../arch/x86/xen/smp_hvm.c: In function ‘xen_hvm_smp_init’:
../arch/x86/xen/smp_hvm.c:77:3: error: ‘nopvspin’ undeclared (first use in this function)
nopvspin = true;
Fixes: 3d7746bea925 ("x86/xen: Fix xen_hvm_smp_init() when vector callback not available") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210115191123.27572-1-rdunlap@infradead.org Signed-off-by: Juergen Gross <jgross@suse.com>
David Woodhouse [Wed, 6 Jan 2021 15:39:58 +0000 (15:39 +0000)]
x86/xen: Fix xen_hvm_smp_init() when vector callback not available
Only the IPI-related functions in the smp_ops should be conditional
on the vector callback being available. The rest should still happen:
• xen_hvm_smp_prepare_boot_cpu()
This function does two things, both of which should still happen if
there is no vector callback support.
The call to xen_vcpu_setup() for vCPU0 should still happen as it just
sets up the vcpu_info for CPU0. That does happen for the secondary
vCPUs too, from xen_cpu_up_prepare_hvm().
The second thing it does is call xen_init_spinlocks(), which perhaps
counter-intuitively should *also* still be happening in the case
without vector callbacks, so that it can clear its local xen_pvspin
flag and disable the virt_spin_lock_key accordingly.
Checking xen_have_vector_callback in xen_init_spinlocks() itself
would affect PV guests, so set the global nopvspin flag in
xen_hvm_smp_init() instead, when vector callbacks aren't available.
• xen_hvm_smp_prepare_cpus()
This does some IPI-related setup by calling xen_smp_intr_init() and
xen_init_lock_cpu(), which can be made conditional. And it sets the
xen_vcpu_id to XEN_VCPU_ID_INVALID for all possible CPUS, which does
need to happen.
• xen_smp_cpus_done()
This offlines any vCPUs which doesn't fit in the global shared_info
page, if separate vcpu_info placement isn't available. That part also
needs to happen regardless of vector callback support.
• xen_hvm_cpu_die()
This doesn't actually do anything other than commin_cpu_die() right
right now in the !vector_callback case; all three teardown functions
it calls should be no-ops. But to guard against future regressions
it's useful to call it anyway, and for it to explicitly check for
xen_have_vector_callback before calling those additional functions.
David Woodhouse [Wed, 6 Jan 2021 15:39:57 +0000 (15:39 +0000)]
x86/xen: Don't register Xen IPIs when they aren't going to be used
In the case where xen_have_vector_callback is false, we still register
the IPI vectors in xen_smp_intr_init() for the secondary CPUs even
though they aren't going to be used. Stop doing that.
David Woodhouse [Wed, 6 Jan 2021 15:39:56 +0000 (15:39 +0000)]
x86/xen: Add xen_no_vector_callback option to test PCI INTX delivery
It's useful to be able to test non-vector event channel delivery, to make
sure Linux will work properly on older Xen which doesn't have it.
It's also useful for those working on Xen and Xen-compatible hypervisors,
because there are guest kernels still in active use which use PCI INTX
even when vector delivery is available.
David Woodhouse [Wed, 6 Jan 2021 15:39:55 +0000 (15:39 +0000)]
xen: Set platform PCI device INTX affinity to CPU0
With INTX or GSI delivery, Xen uses the event channel structures of CPU0.
If the interrupt gets handled by Linux on a different CPU, then no events
are seen as pending. Rather than introducing locking to allow other CPUs
to process CPU0's events, just ensure that the PCI interrupts happens
only on CPU0.
David Woodhouse [Wed, 13 Jan 2021 13:26:02 +0000 (13:26 +0000)]
xen: Fix event channel callback via INTX/GSI
For a while, event channel notification via the PCI platform device
has been broken, because we attempt to communicate with xenstore before
we even have notifications working, with the xs_reset_watches() call
in xs_init().
We tend to get away with this on Xen versions below 4.0 because we avoid
calling xs_reset_watches() anyway, because xenstore might not cope with
reading a non-existent key. And newer Xen *does* have the vector
callback support, so we rarely fall back to INTX/GSI delivery.
To fix it, clean up a bit of the mess of xs_init() and xenbus_probe()
startup. Call xs_init() directly from xenbus_init() only in the !XS_HVM
case, deferring it to be called from xenbus_probe() in the XS_HVM case
instead.
Then fix up the invocation of xenbus_probe() to happen either from its
device_initcall if the callback is available early enough, or when the
callback is finally set up. This means that the hack of calling
xenbus_probe() from a workqueue after the first interrupt, or directly
from the PCI platform device setup, is no longer needed.
Jason Andryuk [Wed, 16 Dec 2020 14:08:38 +0000 (09:08 -0500)]
xen: Kconfig: remove X86_64 depends from XEN_512GB
commit bfda93aee0ec ("xen: Kconfig: nest Xen guest options")
accidentally re-added X86_64 as a dependency to XEN_512GB. It was
originally removed in commit a13f2ef168cb ("x86/xen: remove 32-bit Xen
PV guest support"). Remove it again.
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Jason Andryuk [Wed, 14 Oct 2020 17:53:40 +0000 (13:53 -0400)]
xen: Remove Xen PVH/PVHVM dependency on PCI
A Xen PVH domain doesn't have a PCI bus or devices, so it doesn't need
PCI support built in. Currently, XEN_PVH depends on XEN_PVHVM which
depends on PCI.
Introduce XEN_PVHVM_GUEST as a toplevel item and change XEN_PVHVM to a
hidden variable. This allows XEN_PVH to depend on XEN_PVHVM without PCI
while XEN_PVHVM_GUEST depends on PCI.
In drivers/xen, compile platform-pci depending on XEN_PVHVM_GUEST since
that pulls in the PCI dependency for linking.
xen-blkback: set ring->xenblkd to NULL after kthread_stop()
When xen_blkif_disconnect() is called, the kernel thread behind the
block interface is stopped by calling kthread_stop(ring->xenblkd).
The ring->xenblkd thread pointer being non-NULL determines if the
thread has been already stopped.
Normally, the thread's function xen_blkif_schedule() sets the
ring->xenblkd to NULL, when the thread's main loop ends.
However, when the thread has not been started yet (i.e.
wake_up_process() has not been called on it), the xen_blkif_schedule()
function would not be called yet.
In such case the kthread_stop() call returns -EINTR and the
ring->xenblkd remains dangling.
When this happens, any consecutive call to xen_blkif_disconnect (for
example in frontend_changed() callback) leads to a kernel crash in
kthread_stop() (e.g. NULL pointer dereference in exit_creds()).
'xenbus_backend' watches 'state' of devices, which is writable by
guests. Hence, if guests intensively updates it, dom0 will have lots of
pending events that exhausting memory of dom0. In other words, guests
can trigger dom0 memory pressure. This is known as XSA-349. However,
the watch callback of it, 'frontend_changed()', reads only 'state', so
doesn't need to have the pending events.
To avoid the problem, this commit disallows pending watch messages for
'xenbus_backend' using the 'will_handle()' watch callback.
SeongJae Park [Mon, 14 Dec 2020 09:07:13 +0000 (10:07 +0100)]
xen/xenbus: Count pending messages for each watch
This commit adds a counter of pending messages for each watch in the
struct. It is used to skip unnecessary pending messages lookup in
'unregister_xenbus_watch()'. It could also be used in 'will_handle'
callback.
SeongJae Park [Mon, 14 Dec 2020 09:04:18 +0000 (10:04 +0100)]
xen/xenbus: Add 'will_handle' callback support in xenbus_watch_path()
Some code does not directly make 'xenbus_watch' object and call
'register_xenbus_watch()' but use 'xenbus_watch_path()' instead. This
commit adds support of 'will_handle' callback in the
'xenbus_watch_path()' and it's wrapper, 'xenbus_watch_pathfmt()'.
SeongJae Park [Mon, 14 Dec 2020 09:02:45 +0000 (10:02 +0100)]
xen/xenbus: Allow watches discard events before queueing
If handling logics of watch events are slower than the events enqueue
logic and the events can be created from the guests, the guests could
trigger memory pressure by intensively inducing the events, because it
will create a huge number of pending events that exhausting the memory.
Fortunately, some watch events could be ignored, depending on its
handler callback. For example, if the callback has interest in only one
single path, the watch wouldn't want multiple pending events. Or, some
watches could ignore events to same path.
To let such watches to volutarily help avoiding the memory pressure
situation, this commit introduces new watch callback, 'will_handle'. If
it is not NULL, it will be called for each new event just before
enqueuing it. Then, if the callback returns false, the event will be
discarded. No watch is using the callback for now, though.
Linus Torvalds [Sun, 13 Dec 2020 19:31:19 +0000 (11:31 -0800)]
Merge tag 'x86-urgent-2020-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 and membarrier fixes:
- Correct a few problems in the x86 and the generic membarrier
implementation. Small corrections for assumptions about visibility
which have turned out not to be true.
- Make the PAT bits for memory encryption correct vs 4K and 2M/1G
page table entries as they are at a different location.
- Fix a concurrency issue in the the local bandwidth readout of
resource control leading to incorrect values
- Fix the ordering of allocating a vector for an interrupt. The order
missed to respect the provided cpumask when the first attempt of
allocating node local in the mask fails. It then tries the node
instead of trying the full provided mask first. This leads to
erroneous error messages and breaking the (user) supplied affinity
request. Reorder it.
- Make the INT3 padding detection in optprobe work correctly"
* tag 'x86-urgent-2020-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe to detect INT3 padding correctly
x86/apic/vector: Fix ordering in vector assignment
x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabled
x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP
membarrier: Execute SYNC_CORE on the calling thread
membarrier: Explicitly sync remote cores when SYNC_CORE is requested
membarrier: Add an actual barrier before rseq_preempt()
x86/membarrier: Get rid of a dubious optimization
Linus Torvalds [Sun, 13 Dec 2020 18:36:23 +0000 (10:36 -0800)]
Merge tag 'block-5.10-2020-12-12' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"This should be it for 5.10.
Mike and Song looked into the warning case, and thankfully it appears
the fix was pretty trivial - we can just change the md device chunk
type to unsigned int to get rid of it. They cannot currently be < 0,
and nobody is checking for that either.
We're reverting the discard changes as the corruption reports came in
very late, and there's just no time to attempt to deal with it at this
point. Reverting the changes in question is the right call for 5.10"
* tag 'block-5.10-2020-12-12' of git://git.kernel.dk/linux-block:
md: change mddev 'chunk_sectors' from int to unsigned
Revert "md: add md_submit_discard_bio() for submitting discard bio"
Revert "md/raid10: extend r10bio devs to raid disks"
Revert "md/raid10: pull codes that wait for blocked dev into one function"
Revert "md/raid10: improve raid10 discard request"
Revert "md/raid10: improve discard request for far layout"
Revert "dm raid: remove unnecessary discard limits for raid10"
Linus Torvalds [Sat, 12 Dec 2020 20:57:12 +0000 (12:57 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five small fixes. Four in drivers:
- hisi_sas: fix internal queue timeout
- be2iscsi: revert a prior fix causing problems
- bnx2i: add missing dependency
- storvsc: late arriving revert of a problem fix
and one in the core.
The core one is a minor change to stop paying attention to the busy
count when returning out of resources because there's a race window
where the queue might not restart due to missing returning I/O"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
Revert "scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()"
scsi: hisi_sas: Select a suitable queue for internal I/Os
scsi: core: Fix race between handling STS_RESOURCE and completion
scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()"
scsi: bnx2i: Requires MMU
Linus Torvalds [Sat, 12 Dec 2020 18:08:16 +0000 (10:08 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes for ARM, x86 and tools"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
tools/kvm_stat: Exempt time-based counters
KVM: mmu: Fix SPTE encoding of MMIO generation upper half
kvm: x86/mmu: Use cpuid to determine max gfn
kvm: svm: de-allocate svm_cpu_data for all cpus in svm_cpu_uninit()
selftests: kvm/set_memory_region_test: Fix race in move region test
KVM: arm64: Add usage of stage 2 fault lookup level in user_mem_abort()
KVM: arm64: Fix handling of merging tables into a block entry
KVM: arm64: Fix memory leak on stage2 update of a valid PTE
Linus Torvalds [Sat, 12 Dec 2020 18:02:03 +0000 (10:02 -0800)]
Merge tag 'for-linus-5.10c-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"A short series fixing a regression introduced in 5.9 for running as
Xen dom0 on a system with NVMe backed storage"
* tag 'for-linus-5.10c-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: don't use page->lru for ZONE_DEVICE memory
xen: add helpers for caching grant mapping pages
Linus Torvalds [Sat, 12 Dec 2020 17:50:26 +0000 (09:50 -0800)]
Merge tag 'riscv-for-linus-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"Just one fix. It's nothing critical, just a randconfig that wasn't
building. That said, it does seem pretty safe and is technically a
regression so I'm sending it along for 5.10:
- define get_cycles64() all the time, as it's used by most
configurations"
* tag 'riscv-for-linus-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Define get_cycles64() regardless of M-mode
Linus Torvalds [Sat, 12 Dec 2020 17:41:33 +0000 (09:41 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for cm109 stomping on its own control URB if it tries to toggle
buzzer immediately after userspace opens input device (found by
syzcaller)
- another fix for Raydium touchscreens that do not like splitting
command transfers
- quirks for i8042, soc_button_array, and goodix drivers to make them
work better with certain hardware.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix - add upside-down quirk for Teclast X98 Pro tablet
Input: cm109 - do not stomp on control URB
Input: i8042 - add Acer laptops to the i8042 reset list
Input: cros_ec_keyb - send 'scancodes' in addition to key events
Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list
Input: raydium_ts_i2c - do not split tx transactions
Mike Snitzer [Sat, 12 Dec 2020 16:55:37 +0000 (11:55 -0500)]
md: change mddev 'chunk_sectors' from int to unsigned
Commit e2782f560c29 ("Revert "dm raid: remove unnecessary discard
limits for raid10"") exposed compiler warnings introduced by commit e0910c8e4f87 ("dm raid: fix discard limits for raid1 and raid10"):
In file included from ./include/linux/kernel.h:14,
from ./include/asm-generic/bug.h:20,
from ./arch/x86/include/asm/bug.h:93,
from ./include/linux/bug.h:5,
from ./include/linux/mmdebug.h:5,
from ./include/linux/gfp.h:5,
from ./include/linux/slab.h:15,
from drivers/md/dm-raid.c:8:
drivers/md/dm-raid.c: In function ‘raid_io_hints’:
./include/linux/minmax.h:18:28: warning: comparison of distinct pointer types lacks a cast
(!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
^~
./include/linux/minmax.h:32:4: note: in expansion of macro ‘__typecheck’
(__typecheck(x, y) && __no_side_effects(x, y))
^~~~~~~~~~~
./include/linux/minmax.h:42:24: note: in expansion of macro ‘__safe_cmp’
__builtin_choose_expr(__safe_cmp(x, y), \
^~~~~~~~~~
./include/linux/minmax.h:51:19: note: in expansion of macro ‘__careful_cmp’
#define min(x, y) __careful_cmp(x, y, <)
^~~~~~~~~~~~~
./include/linux/minmax.h:84:39: note: in expansion of macro ‘min’
__x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); })
^~~
drivers/md/dm-raid.c:3739:33: note: in expansion of macro ‘min_not_zero’
limits->max_discard_sectors = min_not_zero(rs->md.chunk_sectors,
^~~~~~~~~~~~
Fix this by changing the chunk_sectors member of 'struct mddev' from
int to 'unsigned int' to match the type used for the 'chunk_sectors'
member of 'struct queue_limits'. Various MD code still uses 'int' but
none of it appears to ever make use of signed int; and storing
positive signed int in unsigned is perfectly safe.
Reported-by: Song Liu <songliubraving@fb.com> Fixes: e2782f560c29 ("Revert "dm raid: remove unnecessary discard limits for raid10"") Fixes: e0910c8e4f87 ("dm raid: fix discard limits for raid1 and raid10") Cc: stable@vger,kernel.org # e0910c8e4f87 was marked for stable@ Signed-off-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Masami Hiramatsu [Fri, 11 Dec 2020 07:04:17 +0000 (16:04 +0900)]
x86/kprobes: Fix optprobe to detect INT3 padding correctly
Commit
7705dc855797 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes")
changed the padding bytes between functions from NOP to INT3. However,
when optprobe decodes a target function it finds INT3 and gives up the
jump optimization.
Instead of giving up any INT3 detection, check whether the rest of the
bytes to the end of the function are INT3. If all of them are INT3,
those come from the linker. In that case, continue the optprobe jump
optimization.
[ bp: Massage commit message. ]
Fixes: 7705dc855797 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes") Reported-by: Adam Zabrocki <pi3@pi3.com.pl> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/160767025681.3880685.16021570341428835411.stgit@devnote2
Stefan Raspl [Tue, 8 Dec 2020 21:08:29 +0000 (22:08 +0100)]
tools/kvm_stat: Exempt time-based counters
The new counters halt_poll_success_ns and halt_poll_fail_ns do not count
events. Instead they provide a time, and mess up our statistics. Therefore,
we should exclude them.
Removal is currently implemented with an exempt list. If more counters like
these appear, we can think about a more general rule like excluding all
fields name "*_ns", in case that's a standing convention.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Tested-and-reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20201208210829.101324-1-raspl@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: mmu: Fix SPTE encoding of MMIO generation upper half
Commit cae7ed3c2cb0 ("KVM: x86: Refactor the MMIO SPTE generation handling")
cleaned up the computation of MMIO generation SPTE masks, however it
introduced a bug how the upper part was encoded:
SPTE bits 52-61 were supposed to contain bits 10-19 of the current
generation number, however a missing shift encoded bits 1-10 there instead
(mostly duplicating the lower part of the encoded generation number that
then consisted of bits 1-9).
In the meantime, the upper part was shrunk by one bit and moved by
subsequent commits to become an upper half of the encoded generation number
(bits 9-17 of bits 0-17 encoded in a SPTE).
In addition to the above, commit 56871d444bc4 ("KVM: x86: fix overlap between SPTE_MMIO_MASK and generation")
has changed the SPTE bit range assigned to encode the generation number and
the total number of bits encoded but did not update them in the comment
attached to their defines, nor in the KVM MMU doc.
Let's do it here, too, since it is too trivial thing to warrant a separate
commit.
Fixes: cae7ed3c2cb0 ("KVM: x86: Refactor the MMIO SPTE generation handling") Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <156700708db2a5296c5ed7a8b9ac71f1e9765c85.1607129096.git.maciej.szmigiero@oracle.com> Cc: stable@vger.kernel.org
[Reorganize macros so that everything is computed from the bit ranges. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Fri, 11 Dec 2020 22:29:46 +0000 (14:29 -0800)]
Merge tag 'mtd/fixes-for-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Second series of fixes for raw NAND drivers initiated because of a
rework of the ECC engine subsystem.
The location of the DT parsing logic got moved, breaking several
drivers which in fact were not doing the ECC engine initialization at
the right place.
These drivers have been fixed by enforcing a particular ECC engine
type and algorithm, software Hamming, while the algorithm may be
overwritten by a DT property. This merge request fixes this in the
xway, socrates, plat_nand, pasemi, orion, mpc5121, gpio, au1550 and
ams-delta controller drivers"
* tag 'mtd/fixes-for-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: xway: Do not force a particular software ECC engine
mtd: rawnand: socrates: Do not force a particular software ECC engine
mtd: rawnand: plat_nand: Do not force a particular software ECC engine
mtd: rawnand: pasemi: Do not force a particular software ECC engine
mtd: rawnand: orion: Do not force a particular software ECC engine
mtd: rawnand: mpc5121: Do not force a particular software ECC engine
mtd: rawnand: gpio: Do not force a particular software ECC engine
mtd: rawnand: au1550: Do not force a particular software ECC engine
mtd: rawnand: ams-delta: Do not force a particular software ECC engine
Linus Torvalds [Fri, 11 Dec 2020 22:26:17 +0000 (14:26 -0800)]
Merge tag 'mmc-v5.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes:
MMC core:
- Fixup condition for CMD13 polling for RPMB requests
MMC host:
- mtk-sd: Fix system suspend/resume support for CQHCI
- mtd-sd: Extend SDIO IRQ fix to more variants
- sdhci-of-arasan: Fix clock registration error for Keem Bay SOC
- tmio: Bring HW to a sane state after a power off"
* tag 'mmc-v5.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mediatek: mark PM functions as __maybe_unused
mmc: block: Fixup condition for CMD13 polling for RPMB requests
mmc: tmio: improve bringing HW to a sane state with MMC_POWER_OFF
mmc: sdhci-of-arasan: Fix clock registration error for Keem Bay SOC
mmc: mediatek: Extend recheck_sdio_irq fix to more variants
mmc: mediatek: Fix system suspend/resume support for CQHCI
Andrii Nakryiko [Fri, 11 Dec 2020 21:36:25 +0000 (22:36 +0100)]
bpf: Fix enum names for bpf_this_cpu_ptr() and bpf_per_cpu_ptr() helpers
Remove bpf_ prefix, which causes these helpers to be reported in verifier
dump as bpf_bpf_this_cpu_ptr() and bpf_bpf_per_cpu_ptr(), respectively. Lets
fix it as long as it is still possible before UAPI freezes on these helpers.
Linus Torvalds [Fri, 11 Dec 2020 22:10:51 +0000 (14:10 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"8 patches.
Subsystems affected by this patch series: proc, selftests, kbuild, and
mm (pagecache, kasan, hugetlb)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/hugetlb: clear compound_nr before freeing gigantic pages
kasan: fix object remaining in offline per-cpu quarantine
elfcore: fix building with clang
initramfs: fix clang build failure
kbuild: avoid static_assert for genksyms
selftest/fpu: avoid clang warning
proc: use untagged_addr() for pagemap_read addresses
revert "mm/filemap: add static for function __add_to_page_cache_locked"
Gerald Schaefer [Fri, 11 Dec 2020 21:36:53 +0000 (13:36 -0800)]
mm/hugetlb: clear compound_nr before freeing gigantic pages
Commit 1378a5ee451a ("mm: store compound_nr as well as compound_order")
added compound_nr counter to first tail struct page, overlaying with
page->mapping. The overlay itself is fine, but while freeing gigantic
hugepages via free_contig_range(), a "bad page" check will trigger for
non-NULL page->mapping on the first tail page:
BUG: Bad page state in process bash pfn:380001
page:00000000c35f0856 refcount:0 mapcount:0 mapping:00000000126b68aa index:0x0 pfn:0x380001
aops:0x0
flags: 0x3ffff00000000000()
raw: 3ffff00000000000000000000000010000000000000001220000000100000000
raw: 00000000000000000000000000000000ffffffff000000000000000000000000
page dumped because: non-NULL mapping
Modules linked in:
CPU: 6 PID: 616 Comm: bash Not tainted 5.10.0-rc7-next-20201208 #1
Hardware name: IBM 3906 M03 703 (LPAR)
Call Trace:
show_stack+0x6e/0xe8
dump_stack+0x90/0xc8
bad_page+0xd6/0x130
free_pcppages_bulk+0x26a/0x800
free_unref_page+0x6e/0x90
free_contig_range+0x94/0xe8
update_and_free_page+0x1c4/0x2c8
free_pool_huge_page+0x11e/0x138
set_max_huge_pages+0x228/0x300
nr_hugepages_store_common+0xb8/0x130
kernfs_fop_write+0xd2/0x218
vfs_write+0xb0/0x2b8
ksys_write+0xac/0xe0
system_call+0xe6/0x288
Disabling lock debugging due to kernel taint
This is because only the compound_order is cleared in
destroy_compound_gigantic_page(), and compound_nr is set to
1U << order == 1 for order 0 in set_compound_order(page, 0).
Fix this by explicitly clearing compound_nr for first tail page after
calling set_compound_order(page, 0).
Link: https://lkml.kernel.org/r/20201208182813.66391-2-gerald.schaefer@linux.ibm.com Fixes: 1378a5ee451a ("mm: store compound_nr as well as compound_order") Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: <stable@vger.kernel.org> [5.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kuan-Ying Lee [Fri, 11 Dec 2020 21:36:49 +0000 (13:36 -0800)]
kasan: fix object remaining in offline per-cpu quarantine
We hit this issue in our internal test. When enabling generic kasan, a
kfree()'d object is put into per-cpu quarantine first. If the cpu goes
offline, object still remains in the per-cpu quarantine. If we call
kmem_cache_destroy() now, slub will report "Objects remaining" error.
=============================================================================
BUG test_module_slab (Not tainted): Objects remaining in test_module_slab on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Register a cpu hotplug function to remove all objects in the offline
per-cpu quarantine when cpu is going offline. Set a per-cpu variable to
indicate this cpu is offline.
[qiang.zhang@windriver.com: fix slab double free when cpu-hotplug] Link: https://lkml.kernel.org/r/20201204102206.20237-1-qiang.zhang@windriver.com Link: https://lkml.kernel.org/r/1606895585-17382-2-git-send-email-Kuan-Ying.Lee@mediatek.com Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Signed-off-by: Zqiang <qiang.zhang@windriver.com> Suggested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Guangye Yang <guangye.yang@mediatek.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Nicholas Tang <nicholas.tang@mediatek.com> Cc: Miles Chen <miles.chen@mediatek.com> Cc: Qian Cai <qcai@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Fri, 11 Dec 2020 21:36:46 +0000 (13:36 -0800)]
elfcore: fix building with clang
kernel/elfcore.c only contains weak symbols, which triggers a bug with
clang in combination with recordmcount:
Cannot find symbol for section 2: .text.
kernel/elfcore.o: failed
Move the empty stubs into linux/elfcore.h as inline functions. As only
two architectures use these, just use the architecture specific Kconfig
symbols to key off the declaration.
Arnd Bergmann [Fri, 11 Dec 2020 21:36:42 +0000 (13:36 -0800)]
initramfs: fix clang build failure
There is only one function in init/initramfs.c that is in the .text
section, and it is marked __weak. When building with clang-12 and the
integrated assembler, this leads to a bug with recordmcount:
./scripts/recordmcount "init/initramfs.o"
Cannot find symbol for section 2: .text.
init/initramfs.o: failed
I'm not quite sure what exactly goes wrong, but I notice that this
function is only ever called from an __init function, and normally
inlined. Marking it __init as well is clearly correct and it leads to
recordmcount no longer complaining.
Arnd Bergmann [Fri, 11 Dec 2020 21:36:38 +0000 (13:36 -0800)]
kbuild: avoid static_assert for genksyms
genksyms does not know or care about the _Static_assert() built-in, and
sometimes falls back to ignoring the later symbols, which causes
undefined behavior such as
WARNING: modpost: EXPORT symbol "ethtool_set_ethtool_phy_ops" [vmlinux] version generation failed, symbol will not be versioned.
ld: net/ethtool/common.o: relocation R_AARCH64_ABS32 against `__crc_ethtool_set_ethtool_phy_ops' can not be used when making a shared object
net/ethtool/common.o:(_ftrace_annotated_branch+0x0): dangerous relocation: unsupported relocation
Redefine static_assert for genksyms to avoid that.
Link: https://lkml.kernel.org/r/20201203230955.1482058-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Kees Cook <keescook@chromium.org> Cc: Rikard Falkeborn <rikard.falkeborn@gmail.com> Cc: Marco Elver <elver@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miles Chen [Fri, 11 Dec 2020 21:36:31 +0000 (13:36 -0800)]
proc: use untagged_addr() for pagemap_read addresses
When we try to visit the pagemap of a tagged userspace pointer, we find
that the start_vaddr is not correct because of the tag.
To fix it, we should untag the userspace pointers in pagemap_read().
I tested with 5.10-rc4 and the issue remains.
Explanation from Catalin in [1]:
"Arguably, that's a user-space bug since tagged file offsets were never
supported. In this case it's not even a tag at bit 56 as per the arm64
tagged address ABI but rather down to bit 47. You could say that the
problem is caused by the C library (malloc()) or whoever created the
tagged vaddr and passed it to this function. It's not a kernel
regression as we've never supported it.
Now, pagemap is a special case where the offset is usually not
generated as a classic file offset but rather derived by shifting a
user virtual address. I guess we can make a concession for pagemap
(only) and allow such offset with the tag at bit (56 - PAGE_SHIFT + 3)"
My test code is based on [2]:
A userspace pointer which has been tagged by 0xb4: 0xb400007662f541c8
userspace program:
uint64 OsLayer::VirtualToPhysical(void *vaddr) {
uint64 frame, paddr, pfnmask, pagemask;
int pagesize = sysconf(_SC_PAGESIZE);
off64_t off = ((uintptr_t)vaddr) / pagesize * 8; // off = 0xb400007662f541c8 / pagesize * 8 = 0x5a00003b317aa0
int fd = open(kPagemapPath, O_RDONLY);
...
if (lseek64(fd, off, SEEK_SET) != off || read(fd, &frame, 8) != 8) {
int err = errno;
string errtxt = ErrorString(err);
if (fd >= 0)
close(fd);
return 0;
}
...
}
/* watch out for wraparound */
// svpfn == 0xb400007662f54
// (mm->task_size >> PAGE) == 0x8000000
if (svpfn > mm->task_size >> PAGE_SHIFT) // the condition is true because of the tag 0xb4
start_vaddr = end_vaddr;
ret = 0;
while (count && (start_vaddr < end_vaddr)) { // we cannot visit correct entry because start_vaddr is set to end_vaddr
int len;
unsigned long end;
...
}
...
}
Andrew Morton [Fri, 11 Dec 2020 21:36:27 +0000 (13:36 -0800)]
revert "mm/filemap: add static for function __add_to_page_cache_locked"
Revert commit 3351b16af494 ("mm/filemap: add static for function
__add_to_page_cache_locked") due to incompatibility with
ALLOW_ERROR_INJECTION which result in build errors.
Link: https://lkml.kernel.org/r/CAADnVQJ6tmzBXvtroBuEH6QA0H+q7yaSKxrVvVxhqr3KBZdEXg@mail.gmail.com Tested-by: Justin Forbes <jmforbes@linuxtx.org> Tested-by: Greg Thelen <gthelen@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Michal Kubecek <mkubecek@suse.cz> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Tony Luck <tony.luck@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Torokhov [Thu, 10 Dec 2020 04:13:24 +0000 (20:13 -0800)]
Input: cm109 - do not stomp on control URB
We need to make sure we are not stomping on the control URB that was
issued when opening the device when attempting to toggle buzzer.
To do that we need to mark it as pending in cm109_open().
Miquel Raynal [Thu, 3 Dec 2020 19:03:40 +0000 (20:03 +0100)]
mtd: rawnand: xway: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:39 +0000 (20:03 +0100)]
mtd: rawnand: socrates: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:38 +0000 (20:03 +0100)]
mtd: rawnand: plat_nand: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:37 +0000 (20:03 +0100)]
mtd: rawnand: pasemi: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:36 +0000 (20:03 +0100)]
mtd: rawnand: orion: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Fixes: 553508cec2e8 ("mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/linux-mtd/20201203190340.15522-6-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 3 Dec 2020 19:03:35 +0000 (20:03 +0100)]
mtd: rawnand: mpc5121: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:34 +0000 (20:03 +0100)]
mtd: rawnand: gpio: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:33 +0000 (20:03 +0100)]
mtd: rawnand: au1550: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:32 +0000 (20:03 +0100)]
mtd: rawnand: ams-delta: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Linus Torvalds [Fri, 11 Dec 2020 18:25:04 +0000 (10:25 -0800)]
Merge tag 'pinctrl-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here is a late set of pin control fixes for v5.10, most concern some
minor and major issues found in the Intel drivers. Some are so hairy
that I have no idea what is going on there, but luckily the maintainer
knows what's up.
We also have an interesting fix for AMD, which makes AMD-based laptops
more stable IIUC.
Summary:
- Fix up some SPI group and a register offset on Intel Jasperlake
- Set default bias on Intel Merrifield
- Preserve debouncing on Intel Baytrail
- Stop .set_type() irqchip callback in the AMD driver from fiddling
with the debounce filter
- Fix access to GPIO banks that are pass-thru on the Aspeed
- Fix a fix for the Intel pin control driver to disable Rx/Tx when
requesting a UART line as GPIO"
* tag 'pinctrl-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request
pinctrl: aspeed: Fix GPIO requests on pass-through banks
pinctrl: amd: remove debounce filter setting in IRQ type setting
pinctrl: baytrail: Avoid clearing debounce value when turning it off
pinctrl: merrifield: Set default bias in case no particular value given
pinctrl: jasperlake: Fix HOSTSW_OWN offset
pinctrl: jasperlake: Unhide SPI group of pins
Linus Torvalds [Fri, 11 Dec 2020 18:22:17 +0000 (10:22 -0800)]
Merge tag 'v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"These are hopefully the last GPIO fixes for this cycle.
All are driver fixes except a small resource leak for pin ranges in
the gpiolib. Two are PM related, which is nice because when developers
start to find PM bugs it is usually because they have smoked out the
bugs of more severe nature.
Summary:
- Fix runtime PM balancing on the errorpath of the Arizona driver
- Fix a suspend NULL pointer reference in the dwapb driver
- Balance free:ing in gpiochip_generic_free()
- Fix runtime PM balancing on the errorpath of the zynq driver
- Fix irqdomain use-after-free in the mvebu driver
- Break an eternal loop in the spreadtrum EIC driver"
* tag 'v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: eic-sprd: break loop when getting NULL device resource
gpio: mvebu: fix potential user-after-free on probe
gpio: zynq: fix reference leak in zynq_gpio functions
gpiolib: Don't free if pin ranges are not defined
gpio: dwapb: fix NULL pointer dereference at dwapb_gpio_suspend()
gpio: arizona: disable pm_runtime in case of failure
Linus Torvalds [Fri, 11 Dec 2020 18:10:13 +0000 (10:10 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two small clk driver build fixes
- Remove __packed from a Renesas struct to improve portability
- Fix a linking problem with i.MX when config options don't agree"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: renesas: r9a06g032: Drop __packed for portability
clk: imx: scu: fix MXC_CLK_SCU module build break
Dexuan reported a regression where StorVSC fails to probe a device (and
where, consequently, the VM may fail to boot). The root-cause analysis led
to a long-standing race condition that is exposed by the validation /commit
in question. Let's put the new validation aside until a proper solution
for that race condition is in place.
Link: https://lore.kernel.org/r/20201211131404.21359-1-parri.andrea@gmail.com Fixes: 3b8c72d076c4 ("scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()") Cc: Dexuan Cui <decui@microsoft.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Linus Torvalds [Fri, 11 Dec 2020 01:52:13 +0000 (17:52 -0800)]
Merge tag 'drm-fixes-2020-12-11' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Last week of fixes, just amdgpu and i915 collections. We had a i915
regression reported by HJ Lu reported this morning, and this contains
a fix for that he has tested.
There are a fair few other fixes, but they are spread across the two
drivers, and all fairly self contained.
amdgpu:
- Fan fix for CI asics
- Fix a warning in possible_crtcs
- Build fix for when debugfs is disabled
- Display overflow fix
- Display watermark fixes for Renoir
- SDMA 5.2 fix
- Stolen vga memory regression fix
- Power profile fixes
- Fix a regression from removal of GEM and PRIME callbacks
* tag 'drm-fixes-2020-12-11' of git://anongit.freedesktop.org/drm/drm:
drm/i915/display: Go softly softly on initial modeset failure
drm/amd/pm: typo fix (CUSTOM -> COMPUTE)
drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs
drm/amdgpu: fix size calculation with stolen vga memory
drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven
drm/amdkfd: Fix leak in dmabuf import
drm/amdgpu: fix sdma instance fw version and feature version init
drm/amd/display: Add wm table for Renoir
drm/amd/display: Prevent bandwidth overflow
drm/amdgpu: fix debugfs creation/removal, again
drm/amdgpu/disply: set num_crtc earlier
drm/amdgpu/powerplay: parse fan table for CI asics
drm/i915/gt: Declare gen9 has 64 mocs entries!
drm/i915/display/dp: Compute the correct slice count for VDSC on DP
drm/i915: fix size_t greater or equal to zero comparison
drm/i915/gt: Cancel the preemption timeout on responding to it
drm/i915/gt: Ignore repeated attempts to suspend request flow across reset
drm/i915/gem: Propagate error from cancelled submit due to context closure
drm/i915/gem: Check the correct variable in selftest
Palmer Dabbelt [Wed, 25 Nov 2020 19:57:03 +0000 (11:57 -0800)]
RISC-V: Define get_cycles64() regardless of M-mode
The timer driver uses get_cycles64() unconditionally to obtain the current
time. A recent refactoring lost the common definition for some configs, which
is now the only one we need.
Fixes: d5be89a8d118 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Linus Torvalds [Fri, 11 Dec 2020 00:36:30 +0000 (16:36 -0800)]
Merge tag 'powerpc-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One commit to implement copy_from_kernel_nofault_allowed(), otherwise
copy_from_kernel_nofault() can trigger warnings when accessing bad
addresses in some configurations.
Thanks to Christophe Leroy and Qian Cai"
* tag 'powerpc-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fix KUAP warning by providing copy_from_kernel_nofault_allowed()
Chris Wilson [Thu, 10 Dec 2020 23:07:41 +0000 (23:07 +0000)]
drm/i915/display: Go softly softly on initial modeset failure
Reduce the module/device probe error into a mere debug to hide issues
where the initial modeset is failing (after lies told by hw probe) and
the system hangs with a livelock in cleaning up the failed commit.
Reported-by: H.J. Lu <hjl.tools@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210619 Fixes: b3bf99daaee9 ("drm/i915/display: Defer initial modeset until after GGTT is initialised") Fixes: ccc9e67ab26f ("drm/i915/display: Defer initial modeset until after GGTT is initialised") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201210230741.17140-1-chris@chris-wilson.co.uk
Dave Airlie [Thu, 10 Dec 2020 23:47:38 +0000 (09:47 +1000)]
Merge tag 'drm-intel-fixes-2020-12-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Fixes for VDSC/DP, selftests, shmem_utils, preemption, submission, and gt reset:
- Check the correct variable in selftest (Dan)
- Propagate error from canceled submit due to context closure (Chris)
- Ignore repeated attempts to suspend request flow across reset (Chris)
- Cancel the preemption timeout on responding to it (Chris)
- Fix unsigned compared against 0 (Colin)
- Compute the correct slice count for VDSC on DP (Manasi)
- Declar gen9 has 64 mocs entries (Chris)
Dave Airlie [Thu, 10 Dec 2020 23:42:14 +0000 (09:42 +1000)]
Merge tag 'amd-drm-fixes-5.10-2020-12-09' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.10-2020-12-09:
amdgpu:
- Fan fix for CI asics
- Fix a warning in possible_crtcs
- Build fix for when debugfs is disabled
- Display overflow fix
- Display watermark fixes for Renoir
- SDMA 5.2 fix
- Stolen vga memory regression fix
- Power profile fixes
- Fix a regression from removal of GEM and PRIME callbacks
Linus Torvalds [Thu, 10 Dec 2020 23:36:09 +0000 (15:36 -0800)]
Merge tag 'nfs-for-5.10-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"Here are a handful more bugfixes for 5.10.
Unfortunately, we found some problems with the new READ_PLUS operation
that aren't easy to fix. We've decided to disable this codepath
through a Kconfig option for now, but a series of patches going into
5.11 will clean up the code and fix the issues at the same time. This
seemed like the best way to go about it.
Summary:
- Fix array overflow when flexfiles mirroring is enabled
- Fix rpcrdma_inline_fixup() crash with new LISTXATTRS
- Fix 5 second delay when doing inter-server copy
- Disable READ_PLUS by default"
* tag 'nfs-for-5.10-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Disable READ_PLUS by default
NFSv4.2: Fix 5 seconds delay when doing inter server copy
NFS: Fix rpcrdma_inline_fixup() crash with new LISTXATTRS operation
pNFS/flexfiles: Fix array overflow when flexfiles mirroring is enabled
2) Fix memory leak in xfrm_user_policy(). Fix from Yu Kuai.
3) Fix polling in xsk sockets by using sk_poll_wait() instead of
datagram_poll() which keys off of sk_wmem_alloc and such which xsk
sockets do not update. From Xuan Zhuo.
4) Missing init of rekey_data in cfgh80211, from Sara Sharon.
5) Fix destroy of timer before init, from Davide Caratti.
6) Missing CRYPTO_CRC32 selects in ethernet driver Kconfigs, from Arnd
Bergmann.
7) Missing error return in rtm_to_fib_config() switch case, from Zhang
Changzhong.
8) Fix some src/dest address handling in vrf and add a testcase. From
Stephen Suryaputra.
9) Fix multicast handling in Seville switches driven by mscc-ocelot
driver. From Vladimir Oltean.
10) Fix proto value passed to skb delivery demux in udp, from Xin Long.
11) HW pkt counters not reported correctly in enetc driver, from Claudiu
Manoil.
12) Fix deadlock in bridge, from Joseph Huang.
13) Missing of_node_pur() in dpaa2 driver, fromn Christophe JAILLET.
14) Fix pid fetching in bpftool when there are a lot of results, from
Andrii Nakryiko.
15) Fix long timeouts in nft_dynset, from Pablo Neira Ayuso.
16) Various stymmac fixes, from Fugang Duan.
17) Fix null deref in tipc, from Cengiz Can.
18) When mss is biog, coose more resonable rcvq_space in tcp, fromn Eric
Dumazet.
19) Revert a geneve change that likely isnt necessary, from Jakub
Kicinski.
20) Avoid premature rx buffer reuse in various Intel driversm from Björn
Töpel.
21) retain EcT bits during TIS reflection in tcp, from Wei Wang.
22) Fix Tso deferral wrt. cwnd limiting in tcp, from Neal Cardwell.
23) MPLS_OPT_LSE_LABEL attribute is 342 ot 8 bits, from Guillaume Nault
24) Fix propagation of 32-bit signed bounds in bpf verifier and add test
cases, from Alexei Starovoitov.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
selftests: fix poll error in udpgro.sh
selftests/bpf: Fix "dubious pointer arithmetic" test
selftests/bpf: Fix array access with signed variable test
selftests/bpf: Add test for signed 32-bit bound check bug
bpf: Fix propagation of 32-bit signed bounds from 64-bit bounds.
MAINTAINERS: Add entry for Marvell Prestera Ethernet Switch driver
net: sched: Fix dump of MPLS_OPT_LSE_LABEL attribute in cls_flower
net/mlx4_en: Handle TX error CQE
net/mlx4_en: Avoid scheduling restart task if it is already running
tcp: fix cwnd-limited bug for TSO deferral where we send nothing
net: flow_offload: Fix memory leak for indirect flow block
tcp: Retain ECT bits for tos reflection
ethtool: fix stack overflow in ethnl_parse_bitset()
e1000e: fix S0ix flow to allow S0i3.2 subset entry
ice: avoid premature Rx buffer reuse
ixgbe: avoid premature Rx buffer reuse
i40e: avoid premature Rx buffer reuse
igb: avoid transmit queue timeout in xdp path
igb: use xdp_do_flush
igb: skb add metasize for xdp
...
Thomas Gleixner [Thu, 10 Dec 2020 20:18:22 +0000 (21:18 +0100)]
x86/apic/vector: Fix ordering in vector assignment
Prarit reported that depending on the affinity setting the
' irq $N: Affinity broken due to vector space exhaustion.'
message is showing up in dmesg, but the vector space on the CPUs in the
affinity mask is definitely not exhausted.
Shung-Hsi provided traces and analysis which pinpoints the problem:
The ordering of trying to assign an interrupt vector in
assign_irq_vector_any_locked() is simply wrong if the interrupt data has a
valid node assigned. It does:
1) Try the intersection of affinity mask and node mask
2) Try the node mask
3) Try the full affinity mask
4) Try the full online mask
Obviously #2 and #3 are in the wrong order as the requested affinity
mask has to take precedence.
In the observed cases #1 failed because the affinity mask did not contain
CPUs from node 0. That made it allocate a vector from node 0, thereby
breaking affinity and emitting the misleading message.
Revert the order of #2 and #3 so the full affinity mask without the node
intersection is tried before actually affinity is broken.
If no node is assigned then only the full affinity mask and if that fails
the full online mask is tried.
Anna Schumaker [Thu, 3 Dec 2020 20:18:39 +0000 (15:18 -0500)]
NFS: Disable READ_PLUS by default
We've been seeing failures with xfstests generic/091 and generic/263
when using READ_PLUS. I've made some progress on these issues, and the
tests fail later on but still don't pass. Let's disable READ_PLUS by
default until we can work out what is going on.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Dai Ngo [Tue, 24 Nov 2020 03:15:17 +0000 (22:15 -0500)]
NFSv4.2: Fix 5 seconds delay when doing inter server copy
Since commit b4868b44c5628 ("NFSv4: Wait for stateid updates after
CLOSE/OPEN_DOWNGRADE"), every inter server copy operation suffers 5
seconds delay regardless of the size of the copy. The delay is from
nfs_set_open_stateid_locked when the check by nfs_stateid_is_sequential
fails because the seqid in both nfs4_state and nfs4_stateid are 0.
Fix __nfs42_ssc_open to delay setting of NFS_OPEN_STATE in nfs4_state,
until after the call to update_open_stateid, to indicate this is the 1st
open. This fix is part of a 2 patches, the other patch is the fix in the
source server to return the stateid for COPY_NOTIFY request with seqid 1
instead of 0.
Fixes: ce0887ac96d3 ("NFSD add nfs4 inter ssc to nfsd4_copy") Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 25 Nov 2020 00:15:18 +0000 (19:15 -0500)]
NFS: Fix rpcrdma_inline_fixup() crash with new LISTXATTRS operation
By switching to an XFS-backed export, I am able to reproduce the
ibcomp worker crash on my client with xfstests generic/013.
For the failing LISTXATTRS operation, xdr_inline_pages() is called
with page_len=12 and buflen=128.
- When ->send_request() is called, rpcrdma_marshal_req() does not
set up a Reply chunk because buflen is smaller than the inline
threshold. Thus rpcrdma_convert_iovs() does not get invoked at
all and the transport's XDRBUF_SPARSE_PAGES logic is not invoked
on the receive buffer.
- During reply processing, rpcrdma_inline_fixup() tries to copy
received data into rq_rcv_buf->pages because page_len is positive.
But there are no receive pages because rpcrdma_marshal_req() never
allocated them.
The result is that the ibcomp worker faults and dies. Sometimes that
causes a visible crash, and sometimes it results in a transport hang
without other symptoms.
RPC/RDMA's XDRBUF_SPARSE_PAGES support is not entirely correct, and
should eventually be fixed or replaced. However, my preference is
that upper-layer operations should explicitly allocate their receive
buffers (using GFP_KERNEL) when possible, rather than relying on
XDRBUF_SPARSE_PAGES.
Reported-by: Olga kornievskaia <kolga@netapp.com> Suggested-by: Olga kornievskaia <kolga@netapp.com> Fixes: c10a75145feb ("NFSv4.2: add the extended attribute proc functions.") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Olga kornievskaia <kolga@netapp.com> Reviewed-by: Frank van der Linden <fllinden@amazon.com> Tested-by: Olga kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Paolo Abeni [Wed, 9 Dec 2020 11:21:13 +0000 (12:21 +0100)]
selftests: fix poll error in udpgro.sh
The test program udpgso_bench_rx always invokes the poll()
syscall with a timeout of 10ms. If a larger timeout is specified
via the command line, udpgso_bench_rx is supposed to do multiple
poll() calls till the timeout is expired or an event is received.
Currently the poll() loop errors out after the first invocation with
no events, and may causes self-tests failure alike:
This change addresses the issue allowing the poll() loop to consume
all the configured timeout.
Fixes: ada641ff6ed3 ("selftests: fixes for UDP GRO") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
selftests/bpf: Fix "dubious pointer arithmetic" test
The verifier trace changed following a bugfix. After checking the 64-bit
sign, only the upper bit mask is known, not bit 31. Update the test
accordingly.
selftests/bpf: Add test for signed 32-bit bound check bug
After a 32-bit load followed by a branch, the verifier would reduce the
maximum bound of the register to 0x7fffffff, allowing a user to bypass
bound checks. Ensure such a program is rejected.
In the second test, the 64-bit compare should not sufficient to
determine whether the signed 32-bit lower bound is 0, so the verifier
should reject the second branch.
bpf: Fix propagation of 32-bit signed bounds from 64-bit bounds.
The 64-bit signed bounds should not affect 32-bit signed bounds unless the
verifier knows that upper 32-bits are either all 1s or all 0s. For example the
register with smin_value==1 doesn't mean that s32_min_value is also equal to 1,
since smax_value could be larger than 32-bit subregister can hold.
The verifier refines the smax/s32_max return value from certain helpers in
do_refine_retval_range(). Teach the verifier to recognize that smin/s32_min
value is also bounded. When both smin and smax bounds fit into 32-bit
subregister the verifier can propagate those bounds.
Linus Torvalds [Thu, 10 Dec 2020 19:00:27 +0000 (11:00 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Two user triggerable crashers and a some EFA related regressions:
- Syzkaller found a bug in CM
- Restore access to the GID table and fix modify_qp for EFA
- Crasher in qedr"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait
RDMA/core: Fix empty gid table for non IB/RoCE devices
RDMA/efa: Use the correct current and new states in modify QP
RDMA/qedr: iWARP invalid(zero) doorbell address fix
Linus Torvalds [Thu, 10 Dec 2020 18:48:49 +0000 (10:48 -0800)]
Merge tag 'media/v5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A couple of fixes:
- videobuf2: fix a DMABUF bug, preventing it to properly handle cache
sync/flush
- vidtv: an usage after free and a few sparse/smatch warning fixes
- pulse8-cec: a duplicate free and a bug related to new firmware
usage
- mtk-cir: fix a regression on a clock setting"
* tag 'media/v5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: vidtv: fix some warnings
media: vidtv: fix kernel-doc markups
media: [next] media: vidtv: fix a read from an object after it has been freed
media: vb2: set cache sync hints when init buffers
media: pulse8-cec: add support for FW v10 and up
media: pulse8-cec: fix duplicate free at disconnect or probe error
media: mtk-cir: fix calculation of chk period
Xiaochen Shen [Fri, 4 Dec 2020 06:27:59 +0000 (14:27 +0800)]
x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabled
The MBA software controller (mba_sc) is a feedback loop which
periodically reads MBM counters and tries to restrict the bandwidth
below a user-specified value. It tags along the MBM counter overflow
handler to do the updates with 1s interval in mbm_update() and
update_mba_bw().
The purpose of mbm_update() is to periodically read the MBM counters to
make sure that the hardware counter doesn't wrap around more than once
between user samplings. mbm_update() calls __mon_event_count() for local
bandwidth updating when mba_sc is not enabled, but calls mbm_bw_count()
instead when mba_sc is enabled. __mon_event_count() will not be called
for local bandwidth updating in MBM counter overflow handler, but it is
still called when reading MBM local bandwidth counter file
'mbm_local_bytes', the call path is as below:
In __mon_event_count(), m->chunks is updated by delta chunks which is
calculated from previous MSR value (m->prev_msr) and current MSR value.
When mba_sc is enabled, m->chunks is also updated in mbm_update() by
mistake by the delta chunks which is calculated from m->prev_bw_msr
instead of m->prev_msr. But m->chunks is not used in update_mba_bw() in
the mba_sc feedback loop.
When reading MBM local bandwidth counter file, m->chunks was changed
unexpectedly by mbm_bw_count(). As a result, the incorrect local
bandwidth counter which calculated from incorrect m->chunks is shown to
the user.
Fix this by removing incorrect m->chunks updating in mbm_bw_count() in
MBM counter overflow handler, and always calling __mon_event_count() in
mbm_update() to make sure that the hardware local bandwidth counter
doesn't wrap around.
Test steps:
# Run workload with aggressive memory bandwidth (e.g., 10 GB/s)
git clone https://github.com/intel/intel-cmt-cat && cd intel-cmt-cat
&& make
./tools/membw/membw -c 0 -b 10000 --read
# Enable MBA software controller
mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl
# Create control group c1
mkdir /sys/fs/resctrl/c1
# Set MB throttle to 6 GB/s
echo "MB:0=6000;1=6000" > /sys/fs/resctrl/c1/schemata
# Write PID of the workload to tasks file
echo `pidof membw` > /sys/fs/resctrl/c1/tasks
# Read local bytes counters twice with 1s interval, the calculated
# local bandwidth is not as expected (approaching to 6 GB/s):
local_1=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes`
sleep 1
local_2=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes`
echo "local b/w (bytes/s):" `expr $local_2 - $local_1`
Paolo Bonzini [Thu, 10 Dec 2020 16:34:24 +0000 (11:34 -0500)]
Merge tag 'kvmarm-fixes-5.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
kvm/arm64 fixes for 5.10, take #5
- Don't leak page tables on PTE update
- Correctly invalidate TLBs on table to block transition
- Only update permissions if the fault level matches the
expected mapping size
Jens Axboe [Thu, 10 Dec 2020 14:08:22 +0000 (07:08 -0700)]
Merge branch 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-5.10
Pull MD fixes from Song:
"This is to fix raid10 data corruption [1] in 5.10-rc7."
* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
Revert "md: add md_submit_discard_bio() for submitting discard bio"
Revert "md/raid10: extend r10bio devs to raid disks"
Revert "md/raid10: pull codes that wait for blocked dev into one function"
Revert "md/raid10: improve raid10 discard request"
Revert "md/raid10: improve discard request for far layout"
Revert "dm raid: remove unnecessary discard limits for raid10"
Arvind Sankar [Wed, 11 Nov 2020 16:09:45 +0000 (11:09 -0500)]
x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP
The PAT bit is in different locations for 4k and 2M/1G page table
entries.
Add a definition for _PAGE_LARGE_CACHE_MASK to represent the three
caching bits (PWT, PCD, PAT), similar to _PAGE_CACHE_MASK for 4k pages,
and use it in the definition of PMD_FLAGS_DEC_WP to get the correct PAT
index for write-protected pages.
Fixes: 6ebcb060713f ("x86/mm: Add support to encrypt the kernel in-place") Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20201111160946.147341-1-nivedita@alum.mit.edu
Damien Le Moal [Wed, 9 Dec 2020 11:16:10 +0000 (20:16 +0900)]
zonefs: fix page reference and BIO leak
In zonefs_file_dio_append(), the pages obtained using
bio_iov_iter_get_pages() are not released on completion of the
REQ_OP_APPEND BIO, nor when bio_iov_iter_get_pages() fails.
Furthermore, a call to bio_put() is missing when
bio_iov_iter_get_pages() fails.
Fix these resource leaks by adding BIO resource release code (bio_put()i
and bio_release_pages()) at the end of the function after the BIO
execution and add a jump to this resource cleanup code in case of
bio_iov_iter_get_pages() failure.
While at it, also fix the call to task_io_account_write() to be passed
the correct BIO size instead of bio_iov_iter_get_pages() return value.
Reported-by: Christoph Hellwig <hch@lst.de> Fixes: 02ef12a663c7 ("zonefs: use REQ_OP_ZONE_APPEND for sync DIO") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
Chris Chiu [Thu, 10 Dec 2020 04:24:47 +0000 (20:24 -0800)]
Input: i8042 - add Acer laptops to the i8042 reset list
The touchpad operates in Basic Mode by default in the Acer BIOS
setup, but some Aspire/TravelMate models require the i8042 to be
reset in order to be correctly detected.
Matthew Ruffell reported data corruption in raid10 due to the changes
in discard handling [1]. Revert these changes before we find a proper fix.
[1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1907262/ Cc: Matthew Ruffell <matthew.ruffell@canonical.com> Cc: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
Matthew Ruffell reported data corruption in raid10 due to the changes
in discard handling [1]. Revert these changes before we find a proper fix.
[1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1907262/ Cc: Matthew Ruffell <matthew.ruffell@canonical.com> Cc: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
Matthew Ruffell reported data corruption in raid10 due to the changes
in discard handling [1]. Revert these changes before we find a proper fix.
[1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1907262/ Cc: Matthew Ruffell <matthew.ruffell@canonical.com> Cc: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
Matthew Ruffell reported data corruption in raid10 due to the changes
in discard handling [1]. Revert these changes before we find a proper fix.
[1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1907262/ Cc: Matthew Ruffell <matthew.ruffell@canonical.com> Cc: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
Matthew Ruffell reported data corruption in raid10 due to the changes
in discard handling [1]. Revert these changes before we find a proper fix.
[1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1907262/ Cc: Matthew Ruffell <matthew.ruffell@canonical.com> Cc: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
Matthew Ruffell reported data corruption in raid10 due to the changes
in discard handling [1]. Revert these changes before we find a proper fix.
[1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1907262/ Cc: Matthew Ruffell <matthew.ruffell@canonical.com> Cc: Xiao Ni <xni@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
projects / mirror_ubuntu-jammy-kernel.git / log