staging: ks7010: move two preprocessor definitions to ks_wlan.h
In ks_wlan_translate_scan function there are two preprocessor
definitions:
- RSN_INFO_ELEM_ID
- GENERIC_INFO_ELEM_ID
These can be moved to common ks_wlan.h because they can be used
in get_current_ap function instead of use hardcoded values.
GENERIC_INFO_ELEM_ID has been renamed to WPA_INFO_ELEM_ID which
is more clear.
Using these in different calls simplify functions related with
this mainly when types are bool and int because no more conversions
are needed in the caller functions. Those conversion details are
now located in the new helpers improving a lot readability. Calls
in hostif_sme_set_wep function has change also some if's to check
invalid value first avoiding one level indentation.
staging: ks7010: change parameter types and reorder them in hostif_mib_set_request
This commit changes parameter types to use enum mib_attribute, enum
mib_data_type and size_t for size instead of unsigned short. It also
reorder them in a more sense way. Code is updated in different
calls to use new parameters order using 'size' auxiliar local variables
in some of them to improve readability a bit.
staging: ks7010: conver MIB attributes preprocessor defs into an enum
This commit just change some preprocessor definitions related
with MIB attributes into an enumeration which is much cleaner
for this here. Also add kerneldoc to avoid long comment lines.
staging: ks7010: remove nonsense comment in ks_wlan.h file
Header file ks_wlan.h has a lot of nonsense comments along
the different declarations included on it. Most of them are
just the same as the variable name. Just remove them all.
staging: ks7010: use the same parameter for 'event' in hostif_sme_enqueue
Declaration of second parameter 'event' in ks_hostif .h and .c
file is different using uint16_t and unsigned short respectively.
Just unify both using 'u16' which is preferred instead.
staging: ks7010: change local variable type in ks7010_sdio_init_irqs
Local variable 'byte' in ks7010_sdio_init_irqs is declared as
unsigned char and can be declared as u8 which is preferred.
It is being used in calls to ks7010_sdio_writeb which is already
expected an u8.
staging: ks7010: change some local variables type in ks_sdio_interrupt
Local variables 'status', 'rsize' and 'byte' are declared as
unsigned char and can be declared as u8 which is preferred.
They are being used in ks7010_sdio_readb calls which is already
expected an u8.
staging: ks7010: change local variable type in ks7010_rw_function
Local variable 'byte' in ks7010_rw_function is declared as unsigned
char and can be declared as u8 which is preferred. It is being used
in ks7010_sdio_readb which is already expecting an u8.
staging: ks7010: change local variable type in _ks_wlan_hw_power_save
Local variable 'byte' in _ks_wlan_hw_power_save function is declared
as unsigned char and can be declared as u8 which is preferred. It
is being using with ks7010_sdio_readb which expects u8 already.
staging: ks7010: use u8 instead of unsigned char in write_to_device function
Parameter buffer in write_to_device function is declared as
a pointer to unsigned char and can be declared as an u8 type
which is preferred. Internally it calls to ks7010_sdio_write
which is using also u8 as parameter type. Update calls to this
function as well.
Commit 92c1552caef3661f049c4e967550e933599e2663 removes WPS hardcoded
definition and its related conditional preprocessor code. There
was some missing stuff already in this files. Remove it.
staging: ks7010: avoid ks_sdio_card dependency in ks_wlan header
ks_wlan_private struct has a pointer to struct ks_sdio_card in its
fields. Because of that a forward declaration in needed in ks_wlan.h
header and also it makes necessary to have ks_sdio_card public in
a ks7010_sdio.h header. Changing this pointer into a void pointer
makes no longer necessary to have ks7010_sdio.h header as well as
removes the forward dependency in ks_wlan.h. Declaration of
ks_sdio_card has been moved to ks7010_sdio.c source file and To make
code cleaner inside this file a new ks7010_to_func function has been
added. The code has been updated to this changes.
staging: ks7010: move tx and rx queues definitions into ks_wlan.h header
There are some definitions for rx and tx queues in ks7010_sdio
which is not the best place to put them. Changing them into the
ks_wlan header file there is no need to explicity include ks7010_sdio.h
which makes no sense at all and can be resolved easily using
forward declarations. The functions related with the queues circular
buffers have been moved also into this header.
staging: ks7010: add SPDX identifiers to all files
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Fix up the all of the staging ks7010 files to have a proper SPDX
identifier, based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.
Extra GPL text wording can be removed as it is no longer needed at all.
Fixed format/style issues found with checkpatch. No code changes.
Corrected alignment of variables after open parenthesis and line breaks.
Checkpatch now returns clean except for "line over 80 char" warnings.
staging: sm750fb: add drm development branch details
The sm750 driver in staging has no future as new framebuffer driver
will not be added to fbdev anymore. A drm driver is being prepared, and
the details added to the TODO file. This sm750fb driver will be removed
as soon as the drm driver is ready. Also, remove my old email.
ion: Consider ion pool pages as indirectly reclaimable
An issue is observed where mallocs are failing due to overcommit failure.
The failure happens when there is high ION page pool since ION page
pool is not considered reclaimable by the overcommit calculation code.
This change considers ion pool pages as indirectly reclaimable and thus
accounted as available memory in the overcommit calculation.
Hongchao Zhang [Wed, 2 May 2018 18:21:47 +0000 (14:21 -0400)]
staging: lustre: obdclass: guarantee all keys filled
In keys_fill, the key_set_version could be changed after
the keys are filled, then the keys in this context won't
be refilled by the following lu_context_refill for its
version is equal to the current key_set_version.
In lu_context_refill, the key_set_version should be protected
before comparing it to version stored in the lu_context.
Signed-off-by: Hongchao Zhang <hongchao.zhang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8346
Reviewed-on: https://review.whamcloud.com/26099
Reviewed-on: https://review.whamcloud.com/27448
Reviewed-on: https://review.whamcloud.com/27994 Reviewed-by: Patrick Farrell <paf@cray.com> Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by: Mike Pershin <mike.pershin@intel.com> Reviewed-by: Fan Yong <fan.yong@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doug Oucahrek [Wed, 2 May 2018 05:22:19 +0000 (22:22 -0700)]
staging: lustre: o2iblnd: fix race at kiblnd_connect_peer
cmid will be destroyed at OFED if kiblnd_cm_callback return error.
if error happen before the end of kiblnd_connect_peer, it will touch
destroyed cmid and fail as
(o2iblnd_cb.c:1315:kiblnd_connect_peer())
ASSERTION( cmid->device != ((void *)0) ) failed:
Signed-off-by: Alexander Boyko <alexander.boyko@seagate.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-10015 Reviewed-by: Alexey Lyashkov <c17817@cray.com> Reviewed-by: Doug Oucharek <dougso@me.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Signed-off-by: Doug Oucharek <dougso@me.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doug Oucharek [Wed, 2 May 2018 03:49:18 +0000 (23:49 -0400)]
staging: lustre: o2iblnd: Fix FastReg map/unmap for MLX5
The FastReg support in ko2iblnd was not unmapping pool items
causing the items to leak. In addition, the mapping code
is not growing the pool like we do with FMR.
This patch makes sure we are unmapping FastReg pool elements
when we are done with them. It also makes sure the pool
will grow when we depleat the pool.
Wenwen Wang [Mon, 30 Apr 2018 22:56:10 +0000 (17:56 -0500)]
staging: lustre: llite: fix potential missing-check bug when copying lumv
In ll_dir_ioctl(), the object lumv3 is firstly copied from the user space
using Its address, i.e., lumv1 = &lumv3. If the lmm_magic field of lumv3 is
LOV_USER_MAGIC_V3, lumv3 will be modified by the second copy from the user
space. The second copy is necessary, because the two versions (i.e.,
lov_user_md_v1 and lov_user_md_v3) have different data formats and lengths.
However, given that the user data resides in the user space, a malicious
user-space process can race to change the data between the two copies. By
doing so, the attacker can provide a data with an inconsistent version,
e.g., v1 version + v3 data. This can lead to logical errors in the
following execution in ll_dir_setstripe(), which performs different actions
according to the version specified by the field lmm_magic.
This patch rechecks the version field lmm_magic in the second copy. If the
version is not as expected, i.e., LOV_USER_MAGIC_V3, an error code will be
returned: -EINVAL.
Signed-off-by: Wenwen Wang <wang6495@umn.edu> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Tue, 1 May 2018 03:52:38 +0000 (13:52 +1000)]
staging: lustre: ldlm: store name directly in namespace.
Rather than storing the name of a namespace in the
hash table, store it directly in the namespace.
This will allow the hashtable to be changed to use
rhashtable.
Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: James Simmons <jsimmons@infradead.org> Reviewed-by: Andreas Dilger <andreas.dilger@dilger.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ajay Singh [Wed, 2 May 2018 07:13:45 +0000 (12:43 +0530)]
staging: wilc1000: use is_broadcast_ether_addr check for broadcast address
Make use of is_broadcast_ether_addr() to check if mac address is broadcast
address. Remove static 'broadcast', as its not needed after use of
is_broadcast_ether_addr().
Ajay Singh [Wed, 2 May 2018 07:13:43 +0000 (12:43 +0530)]
staging: wilc1000: remove unnecessary header file inclusion for wilc
Remove the unnecessary file inclusion in the source code. Also follow
the convension to first include the system header then project specific
header files.
Dan Carpenter [Thu, 3 May 2018 10:56:55 +0000 (13:56 +0300)]
staging: wilc1000: allocate less memory
We should be allocating space for hidden_network_info structs. They are
slightly smaller than hidden_network structs. This bug doesn't cause a
runtime issue beyond the very small ammount of extra memory used.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: Android: vsoc: Fix a i386-randconfig warning.
Fix "warning: cast to pointer from integer of different size" when
printing the region shm physical address. Use the %pa conversion
specifier and pass the resource by reference.
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Another set of x86 related updates:
- Fix the long broken x32 version of the IPC user space headers which
was noticed by Arnd Bergman in course of his ongoing y2038 work.
GLIBC seems to have non broken private copies of these headers so
this went unnoticed.
- Two microcode fixlets which address some more fallout from the
recent modifications in that area:
- Unconditionally save the microcode patch, which was only saved
when CPU_HOTPLUG was enabled causing failures in the late
loading mechanism
- Make the later loader synchronization finally work under all
circumstances. It was exiting early and causing timeout failures
due to a missing synchronization point.
- Do not use mwait_play_dead() on AMD systems to prevent excessive
power consumption as the CPU cannot go into deep power states from
there.
- Address an annoying sparse warning due to lost type qualifiers of
the vmemmap and vmalloc base address constants.
- Prevent reserving crash kernel region on Xen PV as this leads to
the wrong perception that crash kernels actually work there which
is not the case. Xen PV has its own crash mechanism handled by the
hypervisor.
- Add missing TLB cpuid values to the table to make the printout on
certain machines correct.
- Enumerate the new CLDEMOTE instruction
- Fix an incorrect SPDX identifier
- Remove stale macros"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ipc: Fix x32 version of shmid64_ds and msqid64_ds
x86/setup: Do not reserve a crash kernel region if booted on Xen PV
x86/cpu/intel: Add missing TLB cpuid values
x86/smpboot: Don't use mwait_play_dead() on AMD systems
x86/mm: Make vmemmap and vmalloc base address constants unsigned long
x86/vector: Remove the unused macro FPU_IRQ
x86/vector: Remove the macro VECTOR_OFFSET_START
x86/cpufeatures: Enumerate cldemote instruction
x86/microcode: Do not exit early from __reload_late()
x86/microcode/intel: Save microcode patch unconditionally
x86/jailhouse: Fix incorrect SPDX identifier
Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 pti fixes from Thomas Gleixner:
"A set of updates for the x86/pti related code:
- Preserve r8-r11 in int $0x80. r8-r11 need to be preserved, but the
int$80 entry code removed that quite some time ago. Make it correct
again.
- A set of fixes for the Global Bit work which went into 4.17 and
caused a bunch of interesting regressions:
- Triggering a BUG in the page attribute code due to a missing
check for early boot stage
- Warnings in the page attribute code about holes in the kernel
text mapping which are caused by the freeing of the init code.
Handle such holes gracefully.
- Reduce the amount of kernel memory which is set global to the
actual text and do not incidentally overlap with data.
- Disable the global bit when RANDSTRUCT is enabled as it
partially defeats the hardening.
- Make the page protection setup correct for vma->page_prot
population again. The adjustment of the protections fell through
the crack during the Global bit rework and triggers warnings on
machines which do not support certain features, e.g. NX"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64/compat: Preserve r8-r11 in int $0x80
x86/pti: Filter at vma->vm_page_prot population
x86/pti: Disallow global kernel text with RANDSTRUCT
x86/pti: Reduce amount of kernel text allowed to be Global
x86/pti: Fix boot warning from Global-bit setting
x86/pti: Fix boot problems from Global-bit setting
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two fixes from the timer departement:
- Fix a long standing issue in the NOHZ tick code which causes RB
tree corruption, delayed timers and other malfunctions. The cause
for this is code which modifies the expiry time of an enqueued
hrtimer.
- Revert the CLOCK_MONOTONIC/CLOCK_BOOTTIME unification due to
regression reports. Seems userspace _is_ relying on the documented
behaviour despite our hope that it wont"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME
tick/sched: Do not mess with an enqueued hrtimer
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"The perf update contains the following bits:
x86:
- Prevent setting freeze_on_smi on PerfMon V1 CPUs to avoid #GP
perf stat:
- Keep the '/' event modifier separator in fallback, for example when
fallbacking from 'cpu/cpu-cycles/' to user level only, where it
should become 'cpu/cpu-cycles/u' and not 'cpu/cpu-cycles/:u' (Jiri
Olsa)
- Disable write_backward and other event attributes for !group events
in a group, fixing, for instance this group: '{cycles,msr/aperf/}:S'
that has leader sampling (:S) and where just the 'cycles', the
leader event, should have the write_backward attribute set, in this
case it all fails because the PMU where 'msr/aperf/' lives doesn't
accepts write_backward style sampling (Jiri Olsa)
- Only fall back group read for leader (Kan Liang)
- Fix core PMU alias list for x86 platform (Kan Liang)
- Print out hint for mixed PMU group error (Kan Liang)
- Fix duplicate PMU name for interval print (Kan Liang)
Core:
- Set main kernel end address properly when reading kernel and module
maps (Namhyung Kim)
perf mem:
- Fix incorrect entries and add missing man options (Sangwon Hong)
s/390:
- Remove s390 specific strcmp_cpuid_cmp function (Thomas Richter)
- Adapt 'perf test' case record+probe_libc_inet_pton.sh for s390
- Fix s390 undefined record__auxtrace_init() return value in 'perf
record' (Thomas Richter)"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Don't enable freeze-on-smi for PerfMon V1
perf stat: Fix duplicate PMU name for interval print
perf evsel: Only fall back group read for leader
perf stat: Print out hint for mixed PMU group error
perf pmu: Fix core PMU alias list for X86 platform
perf record: Fix s390 undefined record__auxtrace_init() return value
perf mem: Document incorrect and missing options
perf evsel: Disable write_backward for leader sampling group events
perf pmu: Fix pmu events parsing rule
perf stat: Keep the / modifier separator in fallback
perf test: Adapt test case record+probe_libc_inet_pton.sh for s390
perf list: Remove s390 specific strcmp_cpuid_cmp function
perf machine: Set main kernel end address properly
staging: bcm2835-audio: Disconnect and free vchi_instance on module_exit()
In the current implementation, vchi_instance is inited during the first
call of bcm2835_audio_open_connection(), and is never freed. It causes a
memory leak when the module `snd_bcm2835` is removed.
Here is how this commit fixes it:
* the VCHI context (including vchi_instance) is created once in the
platform's devres
* the VCHI context is allocated and connected once during module_init()
* all created bcm2835_chips have a pointer to this VCHI context
* bcm2835_audio_open_connection() can access the VCHI context through the
associated bcm2835_chip
* the VCHI context is disconnected and freed once during module_exit()
After this commit is applied, I don't see other issues with the module's
init/exit, so I also remove the associated TODO task.
Steps to reproduce the memory leak before this commit:
~~~~
root@raspberrypi:/home/pi# aplay test0.wav
Playing WAVE 'test0.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Ster
^CAborted by signal Interrupt...
root@raspberrypi:/home/pi# rmmod snd_bcm2835
root@raspberrypi:/home/pi# modprobe snd_bcm2835
root@raspberrypi:/home/pi# aplay test0.wav
Playing WAVE 'test0.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Ster
^CAborted by signal Interrupt...
root@raspberrypi:/home/pi# echo scan > /sys/kernel/debug/kmemleak
root@raspberrypi:/home/pi# cat /sys/kernel/debug/kmemleak
unreferenced object 0xb6794c00 (size 128):
comm "aplay", pid 406, jiffies 36870 (age 116.650s)
hex dump (first 32 bytes):
08 a5 82 81 01 00 00 00 08 4c 79 b6 08 4c 79 b6 .........Ly..Ly.
00 00 00 00 00 00 00 00 ad 4e ad de ff ff ff ff .........N......
backtrace:
[<802af5e0>] kmem_cache_alloc_trace+0x294/0x3d0
[<806ce620>] vchiq_initialise+0x98/0x1b0
[<806d0b34>] vchi_initialise+0x24/0x34
[<7f1311ec>] 0x7f1311ec
[<7f1303bc>] 0x7f1303bc
[<7f130590>] 0x7f130590
[<7f111fd8>] snd_pcm_open_substream+0x68/0xc4 [snd_pcm]
[<7f112108>] snd_pcm_open+0xd4/0x248 [snd_pcm]
[<7f112334>] snd_pcm_playback_open+0x4c/0x6c [snd_pcm]
[<7f0e250c>] snd_open+0xa8/0x14c [snd]
[<802ce590>] chrdev_open+0xac/0x188
[<802c57b4>] do_dentry_open+0x10c/0x314
[<802c6ba8>] vfs_open+0x5c/0x88
[<802d9a68>] path_openat+0x368/0x944
[<802dacd4>] do_filp_open+0x70/0xc4
[<802c6f70>] do_sys_open+0x110/0x1d4
~~~~
Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: devel@driverdev.osuosl.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yangbo Lu [Thu, 26 Apr 2018 10:23:49 +0000 (18:23 +0800)]
staging: fsl-dpaa2/rtc: support phc_index of ethtool_ts_info
This patch is to support phc_index of ethtool_ts_info.
Also make the rtc drvier depend on FSL_DPAA2_ETH because
this driver is only useful when PTP programs are getting
hardware time stamps on the PTP Ethernet packets using the
SO_TIMESTAMPING API.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: fsl-dpaa2/eth: Add support for hardware timestamping
Hardware timestamping is supported both on Rx and Tx paths.
On Rx, timestamping is enabled for all frames. On Tx, we
only instruct the hardware to timestamp the frames marked
accordingly by the stack.
Merge tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix misc bugs and a regression for ext4"
* tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: add MODULE_SOFTDEP to ensure crc32c is included in the initramfs
ext4: fix bitmap position validation
ext4: set h_journal if there is a failure starting a reserved handle
ext4: prevent right-shifting extents beyond EXT_MAX_BLOCKS
Amir Goldstein [Mon, 5 Feb 2018 17:32:18 +0000 (19:32 +0200)]
<linux/stringhash.h>: fix end_name_hash() for 64bit long
The comment claims that this helper will try not to loose bits, but for
64bit long it looses the high bits before hashing 64bit long into 32bit
int. Use the helper hash_long() to do the right thing for 64bit long.
For 32bit long, there is no change.
All the callers of end_name_hash() either assign the result to
qstr->hash, which is u32 or return the result as an int value (e.g.
full_name_hash()). Change the helper return type to int to conform to
its users.
[ It took me a while to apply this, because my initial reaction to it
was - incorrectly - that it could make for slower code.
After having looked more at it, I take back all my complaints about
the patch, Amir was right and I was mis-reading things or just being
stupid.
I also don't worry too much about the possible performance impact of
this on 64-bit, since most architectures that actually care about
performance end up not using this very much (the dcache code is the
most performance-critical, but the word-at-a-time case uses its own
hashing anyway).
So this ends up being mostly used for filesystems that do their own
degraded hashing (usually because they want a case-insensitive
comparison function).
A _tiny_ worry remains, in that not everybody uses DCACHE_WORD_ACCESS,
and then this potentially makes things more expensive on 64-bit
architectures with slow or lacking multipliers even for the normal
case.
That said, realistically the only such architecture I can think of is
PA-RISC. Nobody really cares about performance on that, it's more of a
"look ma, I've got warts^W an odd machine" platform.
So the patch is fine, and all my initial worries were just misplaced
from not looking at this properly. - Linus ]
Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Sterba [Sat, 28 Apr 2018 17:05:04 +0000 (19:05 +0200)]
MAINTAINERS: add myself as maintainer of AFFS
The AFFS filesystem is still in use by m68k community (Link #2), but as
there was no code activity and no maintainer, the filesystem appeared on
the list of candidates for staging/removal (Link #1).
I volunteer to act as a maintainer of AFFS to collect any fixes that
might show up and to guard fs/affs/ against another spring cleaning.
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- two driver fixes
- better parameter check for the core
- Documentation updates
- part of a tree-wide HAS_DMA cleanup
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sprd: Fix the i2c count issue
i2c: sprd: Prevent i2c accesses after suspend is called
i2c: dev: prevent ZERO_SIZE_PTR deref in i2cdev_ioctl_rdwr()
Documentation/i2c: adopt kernel commenting style in examples
Documentation/i2c: sync docs with current state of i2c-tools
Documentation/i2c: whitespace cleanup
i2c: Remove depends on HAS_DMA in case of platform dependency
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- crypto API regression that may cause sporadic alloc failures
- double-free bug in drbg
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: drbg - set freed buffers to NULL
crypto: api - fix finding algorithm currently being tested
Merge tag '4.17-rc2-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"A few security related fixes for SMB3, most importantly for SMB3.11
encryption"
* tag '4.17-rc2-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: smbd: Avoid allocating iov on the stack
cifs: smbd: Don't use RDMA read/write when signing is used
SMB311: Fix reconnect
SMB3: Fix 3.11 encryption to Windows and handle encrypted smb3 tcon
CIFS: set *resp_buf_type to NO_BUFFER on error
Merge tag 'powerpc-4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A bunch of fixes, mostly for existing code and going to stable.
Our memory hot-unplug path wasn't flushing the cache before removing
memory. That is a problem now that we are doing memory hotplug on bare
metal.
Three fixes for the NPU code that supports devices connected via
NVLink (ie. GPUs). The main one tweaks the TLB flush algorithm to
avoid soft lockups for large flushes.
A fix for our memory error handling where we would loop infinitely,
returning back to the bad access and hard lockup the CPU.
Fixes for the OPAL RTC driver, which wasn't handling some error cases
correctly.
A fix for a hardlockup in the powernv cpufreq driver.
And finally two fixes to our smp_send_stop(), required due to a recent
change to use it on shutdown.
Thanks to: Alistair Popple, Balbir Singh, Laurentiu Tudor, Mahesh
Salgaonkar, Mark Hairgrove, Nicholas Piggin, Rashmica Gupta, Shilpasri
G Bhat"
* tag 'powerpc-4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kvm/booke: Fix altivec related build break
powerpc: Fix deadlock with multiple calls to smp_send_stop
cpufreq: powernv: Fix hardlockup due to synchronous smp_call in timer interrupt
powerpc: Fix smp_send_stop NMI IPI handling
rtc: opal: Fix OPAL RTC driver OPAL_BUSY loops
powerpc/mce: Fix a bug where mce loops on memory UE.
powerpc/powernv/npu: Do a PID GPU TLB flush when invalidating a large address range
powerpc/powernv/npu: Prevent overwriting of pnv_npu2_init_contex() callback parameters
powerpc/powernv/npu: Add lock to prevent race in concurrent context init/destroy
powerpc/powernv/memtrace: Let the arch hotunplug code flush cache
powerpc/mm: Flush cache on memory hot(un)plug
rMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- PSCI selection API, a leftover from 4.16 (for stable)
- Kick vcpu on active interrupt affinity change
- Plug a VMID allocation race on oversubscribed systems
- Silence debug messages
- Update Christoffer's email address (linaro -> arm)
x86:
- Expose userspace-relevant bits of a newly added feature
- Fix TLB flushing on VMX with VPID, but without EPT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/headers/UAPI: Move DISABLE_EXITS KVM capability bits to the UAPI
kvm: apic: Flush TLB after APIC mode/address change if VPIDs are in use
arm/arm64: KVM: Add PSCI version selection API
KVM: arm/arm64: vgic: Kick new VCPU on interrupt migration
arm64: KVM: Demote SVE and LORegion warnings to debug only
MAINTAINERS: Update e-mail address for Christoffer Dall
KVM: arm/arm64: Close VMID generation race
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Nothing too bad, but the spectre updates to smatch identified a few
places that may need sanitising so we've got those covered.
Details:
- Close some potential spectre-v1 vulnerabilities found by smatch
- Add missing list sentinel for CPUs that don't require KPTI
- Removal of unused 'addr' parameter for I/D cache coherency
- Removal of redundant set_fs(KERNEL_DS) calls in ptrace
- Fix single-stepping state machine handling in response to kernel
traps
- Clang support for 128-bit integers
- Avoid instrumenting our out-of-line atomics in preparation for
enabling LSE atomics by default in 4.18"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: avoid instrumenting atomic_ll_sc.o
KVM: arm/arm64: vgic: fix possible spectre-v1 in vgic_mmio_read_apr()
KVM: arm/arm64: vgic: fix possible spectre-v1 in vgic_get_irq()
arm64: fix possible spectre-v1 in ptrace_hbp_get_event()
arm64: support __int128 with clang
arm64: only advance singlestep for user instruction traps
arm64/kernel: rename module_emit_adrp_veneer->module_emit_veneer_for_adrp
arm64: ptrace: remove addr_limit manipulation
arm64: mm: drop addr parameter from sync icache and dcache
arm64: add sentinel to kpti_safe_list
Merge tag 'ceph-for-4.17-rc3' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A CephFS quota follow-up and fixes for two older issues in the
messenger layer, marked for stable"
* tag 'ceph-for-4.17-rc3' of git://github.com/ceph/ceph-client:
libceph: validate con->state at the top of try_write()
libceph: reschedule a tick in finish_hunting()
libceph: un-backoff on tick when we have a authenticated session
ceph: check if mds create snaprealm when setting quota
Merge tag 'char-misc-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 4.17-rc3
A variety of small things that have fallen out after 4.17-rc1 was out.
Some vboxguest fixes for systems with lots of memory, amba bus fixes,
some MAINTAINERS updates, uio_hv_generic driver fixes, and a few other
minor things that resolve problems that people reported.
The amba bus fixes took twice to get right, the first time I messed up
applying the patches in the wrong order, hence the revert and later
addition again with the correct fix, sorry about that.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
ARM: amba: Fix race condition with driver_override
ARM: amba: Make driver_override output consistent with other buses
Revert "ARM: amba: Fix race condition with driver_override"
ARM: amba: Don't read past the end of sysfs "driver_override" buffer
ARM: amba: Fix race condition with driver_override
virt: vbox: Log an error when we fail to get the host version
virt: vbox: Use __get_free_pages instead of kmalloc for DMA32 memory
virt: vbox: Add vbg_req_free() helper function
virt: vbox: Move declarations of vboxguest private functions to private header
slimbus: Fix out-of-bounds access in slim_slicesize()
MAINTAINERS: add dri-devel&linaro-mm for Android ION
fpga-manager: altera-ps-spi: preserve nCONFIG state
MAINTAINERS: update my email address
uio_hv_generic: fix subchannel ring mmap
uio_hv_generic: use correct channel in isr
uio_hv_generic: make ring buffer attribute for primary channel
uio_hv_generic: set size of ring buffer attribute
ANDROID: binder: prevent transactions into own process.
Merge tag 'driver-core-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg Kroah-Hartman:
"Here are some small driver core and firmware fixes for 4.17-rc3
There's a kobject WARN() removal to make syzkaller a lot happier about
some "normal" error paths that it keeps hitting, which should reduce
the number of false-positives we have been getting recently.
There's also some fimware test and documentation fixes, and the
coredump() function signature change that needed to happen after -rc1
before drivers started to take advantage of it.
All of these have been in linux-next with no reported issues"
* tag 'driver-core-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware: some documentation fixes
selftests:firmware: fixes a call to a wrong function name
kobject: don't use WARN for registration failures
firmware: Fix firmware documentation for recent file renames
test_firmware: fix setting old custom fw path back on exit, second try
test_firmware: Install all scripts
drivers: change struct device_driver::coredump() return type to void
Merge tag 'tty-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tty and serial driver fixes for reported issues for
4.17-rc3.
Nothing major, but a number of small things:
- device tree fixes/updates for serial ports
- earlycon fixes
- n_gsm fixes
- tty core change reverted to help resolve syszkaller reports
- other serial driver small fixes
All of these have been in linux-next with no reported issues"
* tag 'tty-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Use __GFP_NOFAIL for tty_ldisc_get()
tty: serial: xuartps: Setup early console when uartclk is also passed
tty: Don't call panic() at tty_ldisc_init()
tty: Avoid possible error pointer dereference at tty_ldisc_restore().
dt-bindings: mvebu-uart: DT fix s/interrupts-names/interrupt-names/
tty: serial: qcom_geni_serial: Use signed variable to get IRQ
earlycon: Use a pointer table to fix __earlycon_table stride
serial: sh-sci: Document r8a77470 bindings
dt-bindings: meson-uart: DT fix s/clocks-names/clock-names/
serial: imx: fix cached UCR2 read on software reset
serial: imx: warn user when using unsupported configuration
serial: mvebu-uart: Fix local flags handling on termios update
tty: n_gsm: Fix DLCI handling for ADM mode if debug & 2 is not set
tty: n_gsm: Fix long delays with control frame timeouts in ADM mode
Merge tag 'staging-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are two staging driver fixups for 4.17-rc3.
The first is the remaining stragglers of the irda code removal that
you pointed out during the merge window. The second is a fix for the
wilc1000 driver due to a patch that got merged in 4.17-rc1.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: wilc1000: fix NULL pointer exception in host_int_parse_assoc_resp_info()
staging: irda: remove remaining remants of irda code removal
Merge tag 'usb-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB driver fixes for reported problems for
4.17-rc3.
The "largest" here is a number of phy core changes for reported
problems with the -rc1 release. There's also the usual musb and xhci
fixes, as well as new device id updates. There are also some usbip
fixes for reported problems as more people start to use that code with
containers.
All of these have been in linux-next with no reported issues, except
the last few new device ids, which are "obviously correct" :)"
* tag 'usb-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
USB: musb: dsps: drop duplicate phy initialisation
USB: musb: host: prevent core phy initialisation
usb: core: phy: add the SPDX-License-Identifier and include guard
xhci: Fix Kernel oops in xhci dbgtty
usb: select USB_COMMON for usb role switch config
usb: core: phy: add missing forward declaration for "struct device"
usb: core: phy: make it a no-op if CONFIG_GENERIC_PHY is disabled
usb: core: use phy_exit during suspend if wake up is not supported
usb: core: split usb_phy_roothub_{init,alloc}
usb: core: phy: fix return value of usb_phy_roothub_exit()
usb: typec: ucsi: Increase command completion timeout value
Revert "xhci: plat: Register shutdown for xhci_plat"
usb: core: Add quirk for HP v222w 16GB Mini
Documentation: typec.rst: Use literal-block element with ascii art
usb: typec: ucsi: fix tracepoint related build error
usbip: usbip_event: fix to not print kernel pointer address
usbip: usbip_host: fix to hold parent lock for device_attach() calls
usbip: vhci_hcd: Fix usb device and sockfd leaks
usbip: vhci_hcd: check rhport before using in vhci_hub_control()
USB: Increment wakeup count on remote wakeup.
...
* tag 'sound-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: dice: fix error path to destroy initialized stream data
ALSA: hda - Skip jack and others for non-existing PCM streams
ALSA: hda/realtek - change the location for one of two front mics
ALSA: rme9652: Hardening for potential Spectre v1
ALSA: hdspm: Hardening for potential Spectre v1
ALSA: asihpi: Hardening for potential Spectre v1
ALSA: opl3: Hardening for potential Spectre v1
ALSA: hda: Hardening for potential Spectre v1
ALSA: control: Hardening for potential Spectre v1
ALSA: seq: oss: Hardening for potential Spectre v1
ALSA: seq: oss: Fix unbalanced use lock for synth MIDI device
ALSA: hda/realtek - Update ALC255 depop optimize
ALSA: hda/realtek - Add some fixes for ALC233
ALSA: pcm: Change return type to vm_fault_t
ALSA: usx2y: Change return type to vm_fault_t
ALSA: usb-audio: ADC3: Fix channel mapping conversion for ADC3.
ALSA: dice: fix OUI for TC group
ALSA: usb-audio: Skip broken EU on Dell dock USB-audio
ALSA: usb-audio: Fix missing endian conversion
ALSA: usb-audio: Fix forgotten conversion of control query functions
...
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This round of fixes has two larger changes that came in last week:
- a couple of patches all intended to finally turn on USB support on
various Amlogic SoC based boards. The respective driver were not
finalized until very late before the merge window and the DT
portion is the last bit now.
- a defconfig update for gemini that had repeatedly missed the cut
but that is required to actually boot any real machines with the
default build.
The rest are the usual small changes:
- a fix for a nasty build regression on the OMAP memory drivers
- a fix for a boot problem on Intel/Altera SocFPGA
- a MAINTAINER file update
- a couple of fixes for issues found by automated testing (kernelci,
coverity, sparse, ...)
- a few incorrect DT entries are updated to match the hardware"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: defconfig: Update Gemini defconfig
ARM: s3c24xx: jive: Fix some GPIO names
HISI LPC: Add Kconfig MFD_CORE dependency
ARM: dts: Fix NAS4220B pin config
MAINTAINERS: Remove myself as maintainer
arm64: dts: correct SATA addresses for Stingray
ARM64: dts: meson-gxm-khadas-vim2: enable the USB controller
ARM64: dts: meson-gxl-nexbox-a95x: enable the USB controller
ARM64: dts: meson-gxl-s905x-libretech-cc: enable the USB controller
ARM64: dts: meson-gx-p23x-q20x: enable the USB controller
ARM64: dts: meson-gxl-s905x-p212: enable the USB controller
ARM64: dts: meson-gxm: add GXM specific USB host configuration
ARM64: dts: meson-gxl: add USB host support
ARM: OMAP2+: Fix build when using split object directories
soc: bcm2835: Make !RASPBERRYPI_FIRMWARE dummies return failure
soc: bcm: raspberrypi-power: Fix use of __packed
ARM: dts: Fix cm2 and prm sizes for omap4
ARM: socfpga_defconfig: Remove QSPI Sector 4K size force
firmware: arm_scmi: remove redundant null check on array
arm64: dts: juno: drop unnecessary address-cells and size-cells properties
* tag 'drm-fixes-for-v4.17-rc3' of git://people.freedesktop.org/~airlied/linux: (27 commits)
drm/edid: Reset more of the display info
drm/virtio: fix vq wait_event condition
qxl: keep separate release_bo pointer
qxl: fix qxl_release_{map,unmap}
Revert "drm/sun4i: add lvds mode_valid function"
drm/amd/display: Check dc_sink every time in MST hotplug
drm/amd/display: Update MST edid property every time
drm/amd/display: Don't read EDID in atomic_check
drm/amd/display: Disallow enabling CRTC without primary plane with FB
drm/amd/display: Fix deadlock when flushing irq
drm/i915/fbdev: Enable late fbdev initial configuration
drm/i915: Use ktime on wait_for
drm/amdgpu: set COMPUTE_PGM_RSRC1 for SGPR/VGPR clearing shaders
drm/amdkfd: fix build, select MMU_NOTIFIER
drm/amdkfd: fix clock counter retrieval for node without GPU
drm/amdkfd: Fix the error return code in kfd_ioctl_unmap_memory_from_gpu()
drm/amdkfd: kfd_dev_is_large_bar() can be static
drm/i915: Enable display WA#1183 from its correct spot
drm/i915/audio: set minimum CD clock to twice the BCLK
drm/msm: don't deref error pointer in the msm_fbdev_create error path
...
kvm: apic: Flush TLB after APIC mode/address change if VPIDs are in use
Currently, KVM flushes the TLB after a change to the APIC access page
address or the APIC mode when EPT mode is enabled. However, even in
shadow paging mode, a TLB flush is needed if VPIDs are being used, as
specified in the Intel SDM Section 29.4.5.
So replace vmx_flush_tlb_ept_only() with vmx_flush_tlb(), which will
flush if either EPT or VPIDs are in use.
Andy Lutomirski [Tue, 17 Apr 2018 14:36:36 +0000 (07:36 -0700)]
x86/entry/64/compat: Preserve r8-r11 in int $0x80
32-bit user code that uses int $80 doesn't care about r8-r11. There is,
however, some 64-bit user code that intentionally uses int $0x80 to invoke
32-bit system calls. From what I've seen, basically all such code assumes
that r8-r15 are all preserved, but the kernel clobbers r8-r11. Since I
doubt that there's any code that depends on int $0x80 zeroing r8-r11,
change the kernel to preserve them.
I suspect that very little user code is broken by the old clobber, since
r8-r11 are only rarely allocated by gcc, and they're clobbered by function
calls, so they only way we'd see a problem is if the same function that
invokes int $0x80 also spills something important to one of these
registers.
The current behavior seems to date back to the historical commit
"[PATCH] x86-64 merge for 2.6.4". Before that, all regs were
preserved. I can't find any explanation of why this change was made.
Update the test_syscall_vdso_32 testcase as well to verify the new
behavior, and it strengthens the test to make sure that the kernel doesn't
accidentally permute r8..r15.
x86/ipc: Fix x32 version of shmid64_ds and msqid64_ds
A bugfix broke the x32 shmid64_ds and msqid64_ds data structure layout
(as seen from user space) a few years ago: Originally, __BITS_PER_LONG
was defined as 64 on x32, so we did not have padding after the 64-bit
__kernel_time_t fields, After __BITS_PER_LONG got changed to 32,
applications would observe extra padding.
In other parts of the uapi headers we seem to have a mix of those
expecting either 32 or 64 on x32 applications, so we can't easily revert
the path that broke these two structures.
Instead, this patch decouples x32 from the other architectures and moves
it back into arch specific headers, partially reverting the even older
commit 73a2d096fdf2 ("x86: remove all now-duplicate header files").
It's not clear whether this ever made any difference, since at least
glibc carries its own (correct) copy of both of these header files,
so possibly no application has ever observed the definitions here.
Based on a suggestion from H.J. Lu, I tried out the tool from
https://github.com/hjl-tools/linux-header to find other such
bugs, which pointed out the same bug in statfs(), which also has
a separate (correct) copy in glibc.
Fixes: f4b4aae18288 ("x86/headers/uapi: Fix __BITS_PER_LONG value for x32 builds") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H . J . Lu" <hjl.tools@gmail.com> Cc: Jeffrey Walton <noloader@gmail.com> Cc: stable@vger.kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lkml.kernel.org/r/20180424212013.3967461-1-arnd@arndb.de
Petr Tesarik [Wed, 25 Apr 2018 10:08:35 +0000 (12:08 +0200)]
x86/setup: Do not reserve a crash kernel region if booted on Xen PV
Xen PV domains cannot shut down and start a crash kernel. Instead,
the crashing kernel makes a SCHEDOP_shutdown hypercall with the
reason code SHUTDOWN_crash, cf. xen_crash_shutdown() machine op in
arch/x86/xen/enlighten_pv.c.
A crash kernel reservation is merely a waste of RAM in this case. It
may also confuse users of kexec_load(2) and/or kexec_file_load(2).
When flags include KEXEC_ON_CRASH or KEXEC_FILE_ON_CRASH,
respectively, these syscalls return success, which is technically
correct, but the crash kexec image will never be actually used.
Signed-off-by: Petr Tesarik <ptesarik@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: xen-devel@lists.xenproject.org Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jean Delvare <jdelvare@suse.de> Link: https://lkml.kernel.org/r/20180425120835.23cef60c@ezekiel.suse.cz
projects / mirror_ubuntu-eoan-kernel.git / log