]> git.proxmox.com Git - mirror_ubuntu-kernels.git/log
mirror_ubuntu-kernels.git
9 years agonet: netcp: ethss: cleanup gbe_probe() and gbe_remove() functions
Karicheri, Muralidharan [Tue, 28 Jul 2015 22:20:14 +0000 (18:20 -0400)]
net: netcp: ethss: cleanup gbe_probe() and gbe_remove() functions

This patch clean up error handle code to use goto label properly. In some
cases, the code unnecessarily use goto instead of just returning the error
code.  Code also make explicit calls to devm_* APIs on error which is
not necessary. In the gbe_remove() also it makes similar calls which is
also unnecessary.

Also fix few checkpatch warnings

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: netcp: ethss: fix up incorrect use of list api
Karicheri, Muralidharan [Tue, 28 Jul 2015 22:20:13 +0000 (18:20 -0400)]
net: netcp: ethss: fix up incorrect use of list api

The code seems to assume a null is returned when the list is empty
from first_sec_slave() to break the loop which is incorrect. Fix the
code by using list_empty().

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: netcp: fix cleanup interface list in netcp_remove()
Karicheri, Muralidharan [Tue, 28 Jul 2015 22:20:12 +0000 (18:20 -0400)]
net: netcp: fix cleanup interface list in netcp_remove()

Currently if user do rmmod keystone_netcp.ko following warning is
seen :-

[   59.035891] ------------[ cut here ]------------
[   59.040535] WARNING: CPU: 2 PID: 1619 at drivers/net/ethernet/ti/
netcp_core.c:2127 netcp_remove)

This is because the interface list is not cleaned up in netcp_remove.
This patch fixes this. Also fix some checkpatch related warnings.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoebpf, x86: fix general protection fault when tail call is invoked
Daniel Borkmann [Tue, 28 Jul 2015 13:26:36 +0000 (15:26 +0200)]
ebpf, x86: fix general protection fault when tail call is invoked

With eBPF JIT compiler enabled on x86_64, I was able to reliably trigger
the following general protection fault out of an eBPF program with a simple
tail call, f.e. tracex5 (or a stripped down version of it):

  [  927.097918] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
  [...]
  [  927.100870] task: ffff8801f228b780 ti: ffff880016a64000 task.ti: ffff880016a64000
  [  927.102096] RIP: 0010:[<ffffffffa002440d>]  [<ffffffffa002440d>] 0xffffffffa002440d
  [  927.103390] RSP: 0018:ffff880016a67a68  EFLAGS: 00010006
  [  927.104683] RAX: 5a5a5a5a5a5a5a5a RBX: 0000000000000000 RCX: 0000000000000001
  [  927.105921] RDX: 0000000000000000 RSI: ffff88014e438000 RDI: ffff880016a67e00
  [  927.107137] RBP: ffff880016a67c90 R08: 0000000000000000 R09: 0000000000000001
  [  927.108351] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880016a67e00
  [  927.109567] R13: 0000000000000000 R14: ffff88026500e460 R15: ffff880220a81520
  [  927.110787] FS:  00007fe7d5c1f740(0000) GS:ffff880265000000(0000) knlGS:0000000000000000
  [  927.112021] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [  927.113255] CR2: 0000003e7bbb91a0 CR3: 000000006e04b000 CR4: 00000000001407e0
  [  927.114500] Stack:
  [  927.115737]  ffffc90008cdb000 ffff880016a67e00 ffff88026500e460 ffff880220a81520
  [  927.117005]  0000000100000000 000000000000001b ffff880016a67aa8 ffffffff8106c548
  [  927.118276]  00007ffcdaf22e58 0000000000000000 0000000000000000 ffff880016a67ff0
  [  927.119543] Call Trace:
  [  927.120797]  [<ffffffff8106c548>] ? lookup_address+0x28/0x30
  [  927.122058]  [<ffffffff8113d176>] ? __module_text_address+0x16/0x70
  [  927.123314]  [<ffffffff8117bf0e>] ? is_ftrace_trampoline+0x3e/0x70
  [  927.124562]  [<ffffffff810c1a0f>] ? __kernel_text_address+0x5f/0x80
  [  927.125806]  [<ffffffff8102086f>] ? print_context_stack+0x7f/0xf0
  [  927.127033]  [<ffffffff810f7852>] ? __lock_acquire+0x572/0x2050
  [  927.128254]  [<ffffffff810f7852>] ? __lock_acquire+0x572/0x2050
  [  927.129461]  [<ffffffff8119edfa>] ? trace_call_bpf+0x3a/0x140
  [  927.130654]  [<ffffffff8119ee4a>] trace_call_bpf+0x8a/0x140
  [  927.131837]  [<ffffffff8119edfa>] ? trace_call_bpf+0x3a/0x140
  [  927.133015]  [<ffffffff8119f008>] kprobe_perf_func+0x28/0x220
  [  927.134195]  [<ffffffff811a1668>] kprobe_dispatcher+0x38/0x60
  [  927.135367]  [<ffffffff81174b91>] ? seccomp_phase1+0x1/0x230
  [  927.136523]  [<ffffffff81061400>] kprobe_ftrace_handler+0xf0/0x150
  [  927.137666]  [<ffffffff81174b95>] ? seccomp_phase1+0x5/0x230
  [  927.138802]  [<ffffffff8117950c>] ftrace_ops_recurs_func+0x5c/0xb0
  [  927.139934]  [<ffffffffa022b0d5>] 0xffffffffa022b0d5
  [  927.141066]  [<ffffffff81174b91>] ? seccomp_phase1+0x1/0x230
  [  927.142199]  [<ffffffff81174b95>] seccomp_phase1+0x5/0x230
  [  927.143323]  [<ffffffff8102c0a4>] syscall_trace_enter_phase1+0xc4/0x150
  [  927.144450]  [<ffffffff81174b95>] ? seccomp_phase1+0x5/0x230
  [  927.145572]  [<ffffffff8102c0a4>] ? syscall_trace_enter_phase1+0xc4/0x150
  [  927.146666]  [<ffffffff817f9a9f>] tracesys+0xd/0x44
  [  927.147723] Code: 48 8b 46 10 48 39 d0 76 2c 8b 85 fc fd ff ff 83 f8 20 77 21 83
                       c0 01 89 85 fc fd ff ff 48 8d 44 d6 80 48 8b 00 48 83 f8 00 74
                       0a <48> 8b 40 20 48 83 c0 33 ff e0 48 89 d8 48 8b 9d d8 fd ff
                       ff 4c
  [  927.150046] RIP  [<ffffffffa002440d>] 0xffffffffa002440d

The code section with the instructions that traps points into the eBPF JIT
image of the root program (the one invoking the tail call instruction).

Using bpf_jit_disasm -o on the eBPF root program image:

  [...]
  4e:   mov    -0x204(%rbp),%eax
        8b 85 fc fd ff ff
  54:   cmp    $0x20,%eax               <--- if (tail_call_cnt > MAX_TAIL_CALL_CNT)
        83 f8 20
  57:   ja     0x000000000000007a
        77 21
  59:   add    $0x1,%eax                <--- tail_call_cnt++
        83 c0 01
  5c:   mov    %eax,-0x204(%rbp)
        89 85 fc fd ff ff
  62:   lea    -0x80(%rsi,%rdx,8),%rax  <--- prog = array->prog[index]
        48 8d 44 d6 80
  67:   mov    (%rax),%rax
        48 8b 00
  6a:   cmp    $0x0,%rax                <--- check for NULL
        48 83 f8 00
  6e:   je     0x000000000000007a
        74 0a
  70:   mov    0x20(%rax),%rax          <--- GPF triggered here! fetch of bpf_func
        48 8b 40 20                              [ matches <48> 8b 40 20 ... from above ]
  74:   add    $0x33,%rax               <--- prologue skip of new prog
        48 83 c0 33
  78:   jmpq   *%rax                    <--- jump to new prog insns
        ff e0
  [...]

The problem is that rax has 5a5a5a5a5a5a5a5a, which suggests a tail call
jump to map slot 0 is pointing to a poisoned page. The issue is the following:

lea instruction has a wrong offset, i.e. it should be ...

  lea    0x80(%rsi,%rdx,8),%rax

... but it actually seems to be ...

  lea   -0x80(%rsi,%rdx,8),%rax

... where 0x80 is offsetof(struct bpf_array, prog), thus the offset needs
to be positive instead of negative. Disassembling the interpreter, we btw
similarly do:

  [...]
  c88:  lea     0x80(%rax,%rdx,8),%rax  <--- prog = array->prog[index]
        48 8d 84 d0 80 00 00 00
  c90:  add     $0x1,%r13d
        41 83 c5 01
  c94:  mov     (%rax),%rax
        48 8b 00
  [...]

Now the other interesting fact is that this panic triggers only when things
like CONFIG_LOCKDEP are being used. In that case offsetof(struct bpf_array,
prog) starts at offset 0x80 and in non-CONFIG_LOCKDEP case at offset 0x50.
Reason is that the work_struct inside struct bpf_map grows by 48 bytes in my
case due to the lockdep_map member (which also has CONFIG_LOCK_STAT enabled
members).

Changing the emitter to always use the 4 byte displacement in the lea
instruction fixes the panic on my side. It increases the tail call instruction
emission by 3 more byte, but it should cover us from various combinations
(and perhaps other future increases on related structures).

After patch, disassembly:

  [...]
  9e:   lea    0x80(%rsi,%rdx,8),%rax   <--- CONFIG_LOCKDEP/CONFIG_LOCK_STAT
        48 8d 84 d6 80 00 00 00
  a6:   mov    (%rax),%rax
        48 8b 00
  [...]

  [...]
  9e:   lea    0x50(%rsi,%rdx,8),%rax   <--- No CONFIG_LOCKDEP
        48 8d 84 d6 50 00 00 00
  a6:   mov    (%rax),%rax
        48 8b 00
  [...]

Fixes: b52f00e6a715 ("x86: bpf_jit: implement bpf_tail_call() helper")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobridge: mdb: fix delmdb state in the notification
Nikolay Aleksandrov [Tue, 28 Jul 2015 11:10:44 +0000 (13:10 +0200)]
bridge: mdb: fix delmdb state in the notification

Since mdb states were introduced when deleting an entry the state was
left as it was set in the delete request from the user which leads to
the following output when doing a monitor (for example):
$ bridge mdb add dev br0 port eth3 grp 239.0.0.1 permanent
(monitor) dev br0 port eth3 grp 239.0.0.1 permanent
$ bridge mdb del dev br0 port eth3 grp 239.0.0.1 permanent
(monitor) dev br0 port eth3 grp 239.0.0.1 temp
^^^
Note the "temp" state in the delete notification which is wrong since
the entry was permanent, the state in a delete is always reported as
"temp" regardless of the real state of the entry.

After this patch:
$ bridge mdb add dev br0 port eth3 grp 239.0.0.1 permanent
(monitor) dev br0 port eth3 grp 239.0.0.1 permanent
$ bridge mdb del dev br0 port eth3 grp 239.0.0.1 permanent
(monitor) dev br0 port eth3 grp 239.0.0.1 permanent

There's one important note to make here that the state is actually not
matched when doing a delete, so one can delete a permanent entry by
stating "temp" in the end of the command, I've chosen this fix in order
not to break user-space tools which rely on this (incorrect) behaviour.

So to give an example after this patch and using the wrong state:
$ bridge mdb add dev br0 port eth3 grp 239.0.0.1 permanent
(monitor) dev br0 port eth3 grp 239.0.0.1 permanent
$ bridge mdb del dev br0 port eth3 grp 239.0.0.1 temp
(monitor) dev br0 port eth3 grp 239.0.0.1 permanent

Note the state of the entry that got deleted is correct in the
notification.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: ccb1c31a7a87 ("bridge: add flags to distinguish permanent mdb entires")
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobridge: mcast: give fast leave precedence over multicast router and querier
Satish Ashok [Tue, 28 Jul 2015 10:28:27 +0000 (03:28 -0700)]
bridge: mcast: give fast leave precedence over multicast router and querier

When fast leave is configured on a bridge port and an IGMP leave is
received for a group, the group is not deleted immediately if there is
a router detected or if multicast querier is configured.
Ideally the group should be deleted immediately when fast leave is
configured.

Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobridge: Fix network header pointer for vlan tagged packets
Toshiaki Makita [Tue, 28 Jul 2015 10:05:37 +0000 (19:05 +0900)]
bridge: Fix network header pointer for vlan tagged packets

There are several devices that can receive vlan tagged packets with
CHECKSUM_PARTIAL like tap, possibly veth and xennet.
When (multiple) vlan tagged packets with CHECKSUM_PARTIAL are forwarded
by bridge to a device with the IP_CSUM feature, they end up with checksum
error because before entering bridge, the network header is set to
ETH_HLEN (not including vlan header length) in __netif_receive_skb_core(),
get_rps_cpu(), or drivers' rx functions, and nobody fixes the pointer later.

Since the network header is exepected to be ETH_HLEN in flow-dissection
and hash-calculation in RPS in rx path, and since the header pointer fix
is needed only in tx path, set the appropriate network header on forwarding
packets.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agopacket: tpacket_snd(): fix signed/unsigned comparison
Alexander Drozdov [Tue, 28 Jul 2015 10:57:01 +0000 (13:57 +0300)]
packet: tpacket_snd(): fix signed/unsigned comparison

tpacket_fill_skb() can return a negative value (-errno) which
is stored in tp_len variable. In that case the following
condition will be (but shouldn't be) true:

tp_len > dev->mtu + dev->hard_header_len

as dev->mtu and dev->hard_header_len are both unsigned.

That may lead to just returning an incorrect EMSGSIZE errno
to the user.

Fixes: 52f1454f629fa ("packet: allow to transmit +4 byte in TX_RING slot for VLAN case")
Signed-off-by: Alexander Drozdov <al.drozdov@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoarp: filter NOARP neighbours for SIOCGARP
Eric Dumazet [Mon, 27 Jul 2015 09:33:50 +0000 (11:33 +0200)]
arp: filter NOARP neighbours for SIOCGARP

When arp is off on a device, and ioctl(SIOCGARP) is queried,
a buggy answer is given with MAC address of the device, instead
of the mac address of the destination/gateway.

We filter out NUD_NOARP neighbours for /proc/net/arp,
we must do the same for SIOCGARP ioctl.

Tested:

lpaa23:~# ./arp 10.246.7.190
MAC=00:01:e8:22:cb:1d      // correct answer

lpaa23:~# ip link set dev eth0 arp off
lpaa23:~# cat /proc/net/arp   # check arp table is now 'empty'
IP address       HW type     Flags       HW address    Mask     Device
lpaa23:~# ./arp 10.246.7.190
MAC=00:1a:11:c3:0d:7f   // buggy answer before patch (this is eth0 mac)

After patch :

lpaa23:~# ip link set dev eth0 arp off
lpaa23:~# ./arp 10.246.7.190
ioctl(SIOCGARP) failed: No such device or address

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Vytautas Valancius <valas@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/ipv4: suppress NETDEV_UP notification on address lifetime update
David Ward [Sun, 26 Jul 2015 16:18:58 +0000 (12:18 -0400)]
net/ipv4: suppress NETDEV_UP notification on address lifetime update

This notification causes the FIB to be updated, which is not needed
because the address already exists, and more importantly it may undo
intentional changes that were made to the FIB after the address was
originally added. (As a point of comparison, when an address becomes
deprecated because its preferred lifetime expired, a notification on
this chain is not generated.)

The motivation for this commit is fixing an incompatibility between
DHCP clients which set and update the address lifetime according to
the lease, and a commercial VPN client which replaces kernel routes
in a way that outbound traffic is sent only through the tunnel (and
disconnects if any further route changes are detected via netlink).

Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobridge: stp: when using userspace stp stop kernel hello and hold timers
Nikolay Aleksandrov [Thu, 23 Jul 2015 18:01:05 +0000 (11:01 -0700)]
bridge: stp: when using userspace stp stop kernel hello and hold timers

These should be handled only by the respective STP which is in control.
They become problematic for devices with limited resources with many
ports because the hold_timer is per port and fires each second and the
hello timer fires each 2 seconds even though it's global. While in
user-space STP mode these timers are completely unnecessary so it's better
to keep them off.
Also ensure that when the bridge is up these timers are started only when
running with kernel STP.

Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agopacket: missing dev_put() in packet_do_bind()
Lars Westerhoff [Mon, 27 Jul 2015 22:32:21 +0000 (01:32 +0300)]
packet: missing dev_put() in packet_do_bind()

When binding a PF_PACKET socket, the use count of the bound interface is
always increased with dev_hold in dev_get_by_{index,name}.  However,
when rebound with the same protocol and device as in the previous bind
the use count of the interface was not decreased.  Ultimately, this
caused the deletion of the interface to fail with the following message:

unregister_netdevice: waiting for dummy0 to become free. Usage count = 1

This patch moves the dev_put out of the conditional part that was only
executed when either the protocol or device changed on a bind.

Fixes: 902fefb82ef7 ('packet: improve socket create/bind latency in some cases')
Signed-off-by: Lars Westerhoff <lars.westerhoff@newtec.eu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agomacvtap: fix network header pointer for VLAN tagged pkts
Ivan Vecera [Thu, 23 Jul 2015 14:37:43 +0000 (16:37 +0200)]
macvtap: fix network header pointer for VLAN tagged pkts

Network header is set with offset ETH_HLEN but it is not true for VLAN
(multiple-)tagged and results in checksum issues in lower devices.

v2: leave skb->protocol untouched (thx Vlad), comment added
v3: moved after skb_probe_transport_header() call (thx Toshiaki)

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agofib_trie: Drop unnecessary calls to leaf_pull_suffix
Alexander Duyck [Mon, 27 Jul 2015 20:08:06 +0000 (13:08 -0700)]
fib_trie: Drop unnecessary calls to leaf_pull_suffix

It was reported that update_suffix was taking a long time on systems where
a large number of leaves were attached to a single node.  As it turns out
fib_table_flush was calling update_suffix for each leaf that didn't have all
of the aliases stripped from it.  As a result, on this large node removing
one leaf would result in us calling update_suffix for every other leaf on
the node.

The fix is to just remove the calls to leaf_pull_suffix since they are
redundant as we already have a call in resize that will go through and
update the suffix length for the node before we exit out of
fib_table_flush or fib_table_flush_external.

Reported-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agomacb: Fix build with macro'ized readl/writel.
David S. Miller [Mon, 27 Jul 2015 21:24:48 +0000 (14:24 -0700)]
macb: Fix build with macro'ized readl/writel.

If an architecture defines readl/writel using CPP macros, we
get the following kinds of build failure:

> > > drivers/net/ethernet/cadence/macb.c:164:1: error: macro "writel"
> > > passed 3 arguments, but takes just 2
>      macb_or_gem_writel(bp, SA1B, bottom);
>     ^

Rename the methods so that this doesn't happen.

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: fec: Ensure clocks are enabled while using mdio bus
Andrew Lunn [Sat, 25 Jul 2015 20:38:02 +0000 (22:38 +0200)]
net: fec: Ensure clocks are enabled while using mdio bus

When a switch is attached to the mdio bus, the mdio bus can be used
while the interface is not open. If the IPG clock is not enabled, MDIO
reads/writes will simply time out.

Add support for runtime PM to control this clock. Enable/disable this
clock using runtime PM, with open()/close() and mdio read()/write()
function triggering runtime PM operations. Since PM is optional, the
IPG clock is enabled at probe and is no longer modified by
fec_enet_clk_enable(), thus if PM is not enabled in the kernel, it is
guaranteed the clock is running when MDIO operations are performed.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Cc: tyler.baker@linaro.org
Cc: fabio.estevam@freescale.com
Cc: shawn.guo@linaro.org
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: netcp: Fixes SGMII reset on network interface shutdown
WingMan Kwok [Fri, 24 Jul 2015 19:02:29 +0000 (15:02 -0400)]
net: netcp: Fixes SGMII reset on network interface shutdown

This patch asserts SGMII RTRESET, i.e. resetting the SGMII Tx/Rx
logic,  during network interface shutdown to avoid having the
hardware wedge when shutting down with high incoming traffic rates.
This is cleared (brought out of RTRESET) when the interface is
brought back up.

Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'macb-fixes'
David S. Miller [Mon, 27 Jul 2015 08:10:30 +0000 (01:10 -0700)]
Merge branch 'macb-fixes'

Andy Shevchenko says:

====================
net/macb: fix for AVR32 and clean up

It seems no one had tested recently the driver on AVR32 platforms such as
ATNGW100. This series bring it back to work.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: convert to kernel doc
Andy Shevchenko [Fri, 24 Jul 2015 18:24:04 +0000 (21:24 +0300)]
net/macb: convert to kernel doc

This patch coverts struct description to the kernel doc format. There is no
functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: replace macb_count_tx_descriptors() by DIV_ROUND_UP()
Andy Shevchenko [Fri, 24 Jul 2015 18:24:03 +0000 (21:24 +0300)]
net/macb: replace macb_count_tx_descriptors() by DIV_ROUND_UP()

macb_count_tx_descriptors() repeats the generic macro DIV_ROUND_UP(). The patch
does a replacement.

There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: suppress compiler warnings
Andy Shevchenko [Fri, 24 Jul 2015 18:24:02 +0000 (21:24 +0300)]
net/macb: suppress compiler warnings

This patch fixes the following warnings:
drivers/net/ethernet/cadence/macb.c: In function â€˜macb_handle_link_change’:
drivers/net/ethernet/cadence/macb.c:266: warning: comparison between signed and unsigned
drivers/net/ethernet/cadence/macb.c:267: warning: comparison between signed and unsigned
drivers/net/ethernet/cadence/macb.c:291: warning: comparison between signed and unsigned
drivers/net/ethernet/cadence/macb.c: In function â€˜gem_update_stats’:
drivers/net/ethernet/cadence/macb.c:1908: warning: comparison between signed and unsigned
drivers/net/ethernet/cadence/macb.c: In function â€˜gem_get_ethtool_strings’:
drivers/net/ethernet/cadence/macb.c:1988: warning: comparison between signed and unsigned

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: use dev_*() when netdev is not yet registered
Andy Shevchenko [Fri, 24 Jul 2015 18:24:01 +0000 (21:24 +0300)]
net/macb: use dev_*() when netdev is not yet registered

To avoid messages like

macb macb.0 (unnamed net_device) (uninitialized): Cadence caps 0x00000000
macb macb.0 (unnamed net_device) (uninitialized): invalid hw address, using random

let's use dev_*() macros.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: check if macb_config present
Andy Shevchenko [Fri, 24 Jul 2015 18:24:00 +0000 (21:24 +0300)]
net/macb: check if macb_config present

The commit 98b5a0f4a228 introduces jumbo frame support, but also it assumes
that macb_config present which is not always true.

The configuration without macb_config fails to boot.

 Unable to handle kernel NULL pointer dereference at virtual address 00000010
 ptbr = 90350000 pgd = 00000000
 Oops: Kernel access of bad area, sig: 11 [#1]
 FRAME_POINTER chip: 0x01f:0x1e82 rev 2
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper Not tainted 4.2.0-rc3-next-20150723+ #13
 task: 91c26000 ti: 91c28000 task.ti: 91c28000
 PC is at macb_probe+0x140/0x61c

Fixes: 98b5a0f4a228 (net: macb: Add support for jumbo frames)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: improve big endian CPU support
Andy Shevchenko [Fri, 24 Jul 2015 18:23:59 +0000 (21:23 +0300)]
net/macb: improve big endian CPU support

The commit a50dad355a53 (net: macb: Add big endian CPU support) converted I/O
accessors to readl_relaxed() and writel_relaxed() and consequentially broke
MACB driver on AVR32 platforms such as ATNGW100.

This patch improves I/O access by checking endiannes first and use the
corresponding methods.

Fixes: a50dad355a53 (net: macb: Add big endian CPU support)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agotcp: fix recv with flags MSG_WAITALL | MSG_PEEK
Sabrina Dubroca [Fri, 24 Jul 2015 16:19:25 +0000 (18:19 +0200)]
tcp: fix recv with flags MSG_WAITALL | MSG_PEEK

Currently, tcp_recvmsg enters a busy loop in sk_wait_data if called
with flags = MSG_WAITALL | MSG_PEEK.

sk_wait_data waits for sk_receive_queue not empty, but in this case,
the receive queue is not empty, but does not contain any skb that we
can use.

Add a "last skb seen on receive queue" argument to sk_wait_data, so
that it sleeps until the receive queue has new skbs.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=99461
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=18493
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1205258
Reported-by: Enrico Scholz <rh-bugzilla@ensc.de>
Reported-by: Dan Searle <dan@censornet.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'r8152-fixes'
David S. Miller [Mon, 27 Jul 2015 07:56:39 +0000 (00:56 -0700)]
Merge branch 'r8152-fixes'

Hayes Wang says:

====================
r8152: issues fix

v2:
Replace patch #2 with "r8152: fix wakeup settings".

v1:
These patches are used to fix issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agor8152: don't enable napi before rx ready
hayeswang [Fri, 24 Jul 2015 05:54:25 +0000 (13:54 +0800)]
r8152: don't enable napi before rx ready

Adjust napi_disable() and napi_enable() to avoid r8152_poll() start
working before rx ready. Otherwise, it may have race condition for
rx_agg.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agor8152: fix wakeup settings
hayeswang [Fri, 24 Jul 2015 05:54:24 +0000 (13:54 +0800)]
r8152: fix wakeup settings

Avoid the driver to enable WOL if the device doesn't support it.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agor8152: fix the issue about U1/U2
hayeswang [Fri, 24 Jul 2015 05:54:23 +0000 (13:54 +0800)]
r8152: fix the issue about U1/U2

- Disable U1/U2 during initialization.
- Disable lpm when linking is on, and enable it when linking is off.
- Disable U1/U2 when enabling runtime suspend.

It is possible to let hw stop working, if the U1/U2 request occurs
during some situations. The patch is used to avoid it.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetoot...
David S. Miller [Mon, 27 Jul 2015 04:53:08 +0000 (21:53 -0700)]
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth

Johan Hedberg says:

====================
pull request: bluetooth 2015-07-23

Here's another one-patch pull request for 4.2 which targets a potential
NULL pointer dereference in the LE Security Manager code that can be
triggered by using older user space tools. The issue has been there
since 4.0 so there's the appropriate "Cc: stable" in place.

Let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: fec: introduce fec_ptp_stop and use in probe fail path
Lucas Stach [Thu, 23 Jul 2015 14:06:20 +0000 (16:06 +0200)]
net: fec: introduce fec_ptp_stop and use in probe fail path

This function frees resources and cancels delayed work item that
have been initialized in fec_ptp_init().

Use this to do proper error handling if something goes wrong in
probe function after fec_ptp_init has been called.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: fec: use managed DMA API functions to allocate BD ring
Lucas Stach [Thu, 23 Jul 2015 14:06:19 +0000 (16:06 +0200)]
net: fec: use managed DMA API functions to allocate BD ring

So it gets freed when the device is going away.
This fixes a DMA memory leak on driver probe() fail and driver
remove().

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoniu: don't count tx error twice in case of headroom realloc fails
Jiri Pirko [Thu, 23 Jul 2015 10:20:37 +0000 (12:20 +0200)]
niu: don't count tx error twice in case of headroom realloc fails

Fixes: a3138df9 ("[NIU]: Add Sun Neptune ethernet driver.")
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'inet-frag-fixes'
David S. Miller [Mon, 27 Jul 2015 04:00:15 +0000 (21:00 -0700)]
Merge branch 'inet-frag-fixes'

Florian Westphal says:

====================
inet: ip defrag bug fixes

Johan Schuijt and Frank Schreuder reported crash and softlockup after the
inet workqueue eviction change:

general protection fault: 0000 [#1] SMP
CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 3.18.18-transip-1.5 #1
Workqueue: events inet_frag_worker
task: ffff880224935130 ti: ffff880224938000 task.ti: ffff880224938000
RIP: 0010:[<ffffffff8149288c>] [<ffffffff8149288c>] inet_evict_bucket+0xfc/0x160
RSP: 0018:ffff88022493bd58  EFLAGS: 00010286
RAX: ffff88021f4f3e80 RBX: dead000000100100 RCX: 000000000000006b
RDX: 000000000000006c RSI: ffff88021f4f3e80 RDI: dead0000001000a8
RBP: 0000000000000002 R08: ffff880222273900 R09: ffff880036e49200
R10: ffff8800c6e86500 R11: ffff880036f45500 R12: ffffffff81a87100
R13: ffff88022493bd70 R14: 0000000000000000 R15: ffff8800c9b26280
[..]
Call Trace:
 [<ffffffff814929e0>] ? inet_frag_worker+0x60/0x210
 [<ffffffff8107e3a2>] ? process_one_work+0x142/0x3b0
 [<ffffffff8107eb94>] ? worker_thread+0x114/0x440
[..]

A second issue results in softlockup since the evictor may restart the
eviction loop for a (potentially) unlimited number of times while local
softirqs are disabled.

Frank reports that test system remained stable for 14 hours of testing
(before, crash occured within half an hour in their setup).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoinet: frags: remove INET_FRAG_EVICTED and use list_evictor for the test
Nikolay Aleksandrov [Thu, 23 Jul 2015 10:05:40 +0000 (12:05 +0200)]
inet: frags: remove INET_FRAG_EVICTED and use list_evictor for the test

We can simply remove the INET_FRAG_EVICTED flag to avoid all the flags
race conditions with the evictor and use a participation test for the
evictor list, when we're at that point (after inet_frag_kill) in the
timer there're 2 possible cases:

1. The evictor added the entry to its evictor list while the timer was
waiting for the chainlock
or
2. The timer unchained the entry and the evictor won't see it

In both cases we should be able to see list_evictor correctly due
to the sync on the chainlock.

Joint work with Florian Westphal.

Tested-by: Frank Schreuder <fschreuder@transip.nl>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoinet: frag: don't wait for timer deletion when evicting
Florian Westphal [Thu, 23 Jul 2015 10:05:39 +0000 (12:05 +0200)]
inet: frag: don't wait for timer deletion when evicting

Frank reports 'NMI watchdog: BUG: soft lockup' errors when
load is high.  Instead of (potentially) unbounded restarts of the
eviction process, just skip to the next entry.

One caveat is that, when a netns is exiting, a timer may still be running
by the time inet_evict_bucket returns.

We use the frag memory accounting to wait for outstanding timers,
so that when we free the percpu counter we can be sure no running
timer will trip over it.

Reported-and-tested-by: Frank Schreuder <fschreuder@transip.nl>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoinet: frag: change *_frag_mem_limit functions to take netns_frags as argument
Florian Westphal [Thu, 23 Jul 2015 10:05:38 +0000 (12:05 +0200)]
inet: frag: change *_frag_mem_limit functions to take netns_frags as argument

Followup patch will call it after inet_frag_queue was freed, so q->net
doesn't work anymore (but netf = q->net; free(q); mem_limit(netf) would).

Tested-by: Frank Schreuder <fschreuder@transip.nl>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoinet: frag: don't re-use chainlist for evictor
Florian Westphal [Thu, 23 Jul 2015 10:05:37 +0000 (12:05 +0200)]
inet: frag: don't re-use chainlist for evictor

commit 65ba1f1ec0eff ("inet: frags: fix a race between inet_evict_bucket
and inet_frag_kill") describes the bug, but the fix doesn't work reliably.

Problem is that ->flags member can be set on other cpu without chainlock
being held by that task, i.e. the RMW-Cycle can clear INET_FRAG_EVICTED
bit after we put the element on the evictor private list.

We can crash when walking the 'private' evictor list since an element can
be deleted from list underneath the evictor.

Join work with Nikolay Alexandrov.

Fixes: b13d3cbfb8e8 ("inet: frag: move eviction of queues to work queue")
Reported-by: Johan Schuijt <johan@transip.nl>
Tested-by: Frank Schreuder <fschreuder@transip.nl>
Signed-off-by: Nikolay Alexandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: sctp: stop spamming klog with rfc6458, 5.3.2. deprecation warnings
Daniel Borkmann [Wed, 22 Jul 2015 14:31:49 +0000 (16:31 +0200)]
net: sctp: stop spamming klog with rfc6458, 5.3.2. deprecation warnings

Back then when we added support for SCTP_SNDINFO/SCTP_RCVINFO from
RFC6458 5.3.4/5.3.5, we decided to add a deprecation warning for the
(as per RFC deprecated) SCTP_SNDRCV via commit bbbea41d5e53 ("net:
sctp: deprecate rfc6458, 5.3.2. SCTP_SNDRCV support"), see [1].

Imho, it was not a good idea, and we should just revert that message
for a couple of reasons:

  1) It's uapi and therefore set in stone forever.

  2) To be able to run on older and newer kernels, an SCTP application
     would need to probe for both, SCTP_SNDRCV, but also SCTP_SNDINFO/
     SCTP_RCVINFO support, so that on older kernels, it can make use
     of SCTP_SNDRCV, and on newer kernels SCTP_SNDINFO/SCTP_RCVINFO.
     In my (limited) experience, a lot of SCTP appliances are migrating
     to newer kernels only ve(ee)ry slowly.

  3) Some people don't have the chance to change their applications,
     f.e. due to proprietary legacy stuff. So, they'll hit this warning
     in fast path and are stuck with older kernels.

But i.e. due to point 1) I really fail to see the benefit of a warning.
So just revert that for now, the issue was reported up Jamal.

  [1] http://thread.gmane.org/gmane.linux.network/321960/

Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Michael Tuexen <tuexen@fh-muenster.de>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'mlx4-fixes'
David S. Miller [Sun, 26 Jul 2015 23:29:26 +0000 (16:29 -0700)]
Merge branch 'mlx4-fixes'

Or Gerlitz says:

====================
mlx4 driver fixes, July 22nd 2015

Just few mlx4 fixes.. the fix related to propagating port state
changes to VF should go to -stable of >= 3.11, all the rest just
to 4.2-rc
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx4_en: Remove BUG_ON assert when checking if ring is full
Ido Shamay [Wed, 22 Jul 2015 13:53:49 +0000 (16:53 +0300)]
net/mlx4_en: Remove BUG_ON assert when checking if ring is full

In mlx4_en_is_ring_empty we check if ring surpassed its size.
Since the prod and cons indicators are u32, there might be a state where
prod wrapped around and cons, making this assert false, although no
actual bug exists (other code segment can cope with this state).

Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx4_core: Relieve cpu load average on the port sending flow
Jack Morgenstein [Wed, 22 Jul 2015 13:53:48 +0000 (16:53 +0300)]
net/mlx4_core: Relieve cpu load average on the port sending flow

When a port is not attached, the FW requires a longer than usual time to
execute the SENSE_PORT command. In the command flow, the
wait_for_completion_timeout call used in mlx4_cmd_wait puts the kernel
thread into the uninterruptible state during this time. This, in turn,
due to the computation method, causes the CPU load average to increase.

Fix this by using wait_for_completion_interruptible_timeout() for the
SENSE_PORT command, which puts the thread in the interruptible state.
In this state, the thread does not contribute to the CPU load average.

Treat the interrupted case as if the SENSE_PORT command returned
port_type = NONE.

Fix suggested by Gideon Naim <gideonn@mellanox.com> and
Bart Van Assche <bart.vanassche@sandisk.com>.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx4_core: Fix wrong index in propagating port change event to VFs
Jack Morgenstein [Wed, 22 Jul 2015 13:53:47 +0000 (16:53 +0300)]
net/mlx4_core: Fix wrong index in propagating port change event to VFs

The port-change event processing in procedure mlx4_eq_int() uses "slave"
as the vf_oper array index. Since the value of "slave" is the PF function
index, the result is that the PF link state is used for deciding to
propagate the event for all the VFs. The VF link state should be used,
so the VF function index should be used here.

Fixes: 948e306d7d64 ('net/mlx4: Add VF link state support')
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx4_core: Use sink counter for the VF default as fallback
Or Gerlitz [Wed, 22 Jul 2015 13:53:46 +0000 (16:53 +0300)]
net/mlx4_core: Use sink counter for the VF default as fallback

Some old PF drivers don't let VFs allocate counters, in that case, use
the sink counter so the VF can load and operate properly.

Fixes: 6de5f7f6a1fa ('net/mlx4_core: Allocate default counter per port')
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobridge: netlink: fix slave_changelink/br_setport race conditions
Nikolay Aleksandrov [Wed, 22 Jul 2015 11:03:40 +0000 (13:03 +0200)]
bridge: netlink: fix slave_changelink/br_setport race conditions

Since slave_changelink support was added there have been a few race
conditions when using br_setport() since some of the port functions it
uses require the bridge lock. It is very easy to trigger a lockup due to
some internal spin_lock() usage without bh disabled, also it's possible to
get the bridge into an inconsistent state.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: 3ac636b8591c ("bridge: implement rtnl_link_ops->slave_changelink")
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
David S. Miller [Sat, 25 Jul 2015 07:18:10 +0000 (00:18 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains ten Netfilter/IPVS fixes, they are:

1) Address refcount leak when creating an expectation from the ctnetlink
   interface.

2) Fix bug splat in the IDLETIMER target related to sysfs, from Dmitry
   Torokhov.

3) Resolve panic for unreachable route in IPVS with locally generated
   traffic in the output path, from Alex Gartrell.

4) Fix wrong source address in rare cases for tunneled traffic in IPVS,
   from Julian Anastasov.

5) Fix crash if scheduler is changed via ipvsadm -E, again from Julian.

6) Make sure skb->sk is unset for forwarded traffic through IPVS, again from
   Alex Gartrell.

7) Fix crash with IPVS sync protocol v0 and FTP, from Julian.

8) Reset sender cpu for forwarded traffic in IPVS, also from Julian.

9) Allocate template conntracks through kmalloc() to resolve netns dependency
   problems with the conntrack kmem_cache.

10) Fix zones with expectations that clash using the same tuple, from Joe
    Stringer.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agocgroup: net_cls: fix false-positive "suspicious RCU usage"
Konstantin Khlebnikov [Wed, 22 Jul 2015 09:23:20 +0000 (12:23 +0300)]
cgroup: net_cls: fix false-positive "suspicious RCU usage"

In dev_queue_xmit() net_cls protected with rcu-bh.

[  270.730026] ===============================
[  270.730029] [ INFO: suspicious RCU usage. ]
[  270.730033] 4.2.0-rc3+ #2 Not tainted
[  270.730036] -------------------------------
[  270.730040] include/linux/cgroup.h:353 suspicious rcu_dereference_check() usage!
[  270.730041] other info that might help us debug this:
[  270.730043] rcu_scheduler_active = 1, debug_locks = 1
[  270.730045] 2 locks held by dhclient/748:
[  270.730046]  #0:  (rcu_read_lock_bh){......}, at: [<ffffffff81682b70>] __dev_queue_xmit+0x50/0x960
[  270.730085]  #1:  (&qdisc_tx_lock){+.....}, at: [<ffffffff81682d60>] __dev_queue_xmit+0x240/0x960
[  270.730090] stack backtrace:
[  270.730096] CPU: 0 PID: 748 Comm: dhclient Not tainted 4.2.0-rc3+ #2
[  270.730098] Hardware name: OpenStack Foundation OpenStack Nova, BIOS Bochs 01/01/2011
[  270.730100]  0000000000000001 ffff8800bafeba58 ffffffff817ad487 0000000000000007
[  270.730103]  ffff880232a0a780 ffff8800bafeba88 ffffffff810ca4f2 ffff88022fb23e00
[  270.730105]  ffff880232a0a780 ffff8800bafebb68 ffff8800bafebb68 ffff8800bafebaa8
[  270.730108] Call Trace:
[  270.730121]  [<ffffffff817ad487>] dump_stack+0x4c/0x65
[  270.730148]  [<ffffffff810ca4f2>] lockdep_rcu_suspicious+0xe2/0x120
[  270.730153]  [<ffffffff816a62d2>] task_cls_state+0x92/0xa0
[  270.730158]  [<ffffffffa00b534f>] cls_cgroup_classify+0x4f/0x120 [cls_cgroup]
[  270.730164]  [<ffffffff816aac74>] tc_classify_compat+0x74/0xc0
[  270.730166]  [<ffffffff816ab573>] tc_classify+0x33/0x90
[  270.730170]  [<ffffffffa00bcb0a>] htb_enqueue+0xaa/0x4a0 [sch_htb]
[  270.730172]  [<ffffffff81682e26>] __dev_queue_xmit+0x306/0x960
[  270.730174]  [<ffffffff81682b70>] ? __dev_queue_xmit+0x50/0x960
[  270.730176]  [<ffffffff816834a3>] dev_queue_xmit_sk+0x13/0x20
[  270.730185]  [<ffffffff81787770>] dev_queue_xmit+0x10/0x20
[  270.730187]  [<ffffffff8178b91c>] packet_snd.isra.62+0x54c/0x760
[  270.730190]  [<ffffffff8178be25>] packet_sendmsg+0x2f5/0x3f0
[  270.730203]  [<ffffffff81665245>] ? sock_def_readable+0x5/0x190
[  270.730210]  [<ffffffff817b64bb>] ? _raw_spin_unlock+0x2b/0x40
[  270.730216]  [<ffffffff8173bcbc>] ? unix_dgram_sendmsg+0x5cc/0x640
[  270.730219]  [<ffffffff8165f367>] sock_sendmsg+0x47/0x50
[  270.730221]  [<ffffffff8165f42f>] sock_write_iter+0x7f/0xd0
[  270.730232]  [<ffffffff811fd4c7>] __vfs_write+0xa7/0xf0
[  270.730234]  [<ffffffff811fe5b8>] vfs_write+0xb8/0x190
[  270.730236]  [<ffffffff811fe8c2>] SyS_write+0x52/0xb0
[  270.730239]  [<ffffffff817b6bae>] entry_SYSCALL_64_fastpath+0x12/0x76

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agosch_choke: drop all packets in queue during reset
WANG Cong [Tue, 21 Jul 2015 23:52:43 +0000 (16:52 -0700)]
sch_choke: drop all packets in queue during reset

Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agosch_plug: purge buffered packets during reset
WANG Cong [Tue, 21 Jul 2015 23:31:53 +0000 (16:31 -0700)]
sch_plug: purge buffered packets during reset

Otherwise the skbuff related structures are not correctly
refcount'ed.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'fib_select_default-fixes'
David S. Miller [Sat, 25 Jul 2015 05:46:23 +0000 (22:46 -0700)]
Merge branch 'fib_select_default-fixes'

Julian Anastasov says:

====================
ipv4: fib_select_default changes

This patchset contains 2 changes for the alternative routes,
one to add tb_id/fa_slen check needed after the recent
fib_trie optimizations for fib aliases and the second
change attempts to support alternative routes with TOS
requirement.

Sorry that I don't have access to the original
report from Hagen Paul Pfeifer. I hope he will see this
change.

The second change adds fa_default field to the
fib aliases (which can be many) and if the feature to
filter the alternative routes by TOS is not worth it,
this second patch can be scrapped.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoipv4: consider TOS in fib_select_default
Julian Anastasov [Wed, 22 Jul 2015 07:43:23 +0000 (10:43 +0300)]
ipv4: consider TOS in fib_select_default

fib_select_default considers alternative routes only when
res->fi is for the first alias in res->fa_head. In the
common case this can happen only when the initial lookup
matches the first alias with highest TOS value. This
prevents the alternative routes to require specific TOS.

This patch solves the problem as follows:

- routes that require specific TOS should be returned by
fib_select_default only when TOS matches, as already done
in fib_table_lookup. This rule implies that depending on the
TOS we can have many different lists of alternative gateways
and we have to keep the last used gateway (fa_default) in first
alias for the TOS instead of using single tb_default value.

- as the aliases are ordered by many keys (TOS desc,
fib_priority asc), we restrict the possible results to
routes with matching TOS and lowest metric (fib_priority)
and routes that match any TOS, again with lowest metric.

For example, packet with TOS 8 can not use gw3 (not lowest
metric), gw4 (different TOS) and gw6 (not lowest metric),
all other gateways can be used:

tos 8 via gw1 metric 2 <--- res->fa_head and res->fi
tos 8 via gw2 metric 2
tos 8 via gw3 metric 3
tos 4 via gw4
tos 0 via gw5
tos 0 via gw6 metric 1

Reported-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoipv4: fib_select_default should match the prefix
Julian Anastasov [Wed, 22 Jul 2015 07:43:22 +0000 (10:43 +0300)]
ipv4: fib_select_default should match the prefix

fib_trie starting from 4.1 can link fib aliases from
different prefixes in same list. Make sure the alternative
gateways are in same table and for same prefix (0) by
checking tb_id and fa_slen.

Fixes: 79e5ad2ceb00 ("fib_trie: Remove leaf_info")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoBluetooth: Fix NULL pointer dereference in smp_conn_security
Johan Hedberg [Mon, 20 Jul 2015 17:31:25 +0000 (20:31 +0300)]
Bluetooth: Fix NULL pointer dereference in smp_conn_security

The l2cap_conn->smp pointer may be NULL for various valid reasons where SMP has
failed to initialize properly. One such scenario is when crypto support is
missing, another when the adapter has been powered on through a legacy method.
The smp_conn_security() function should have the appropriate check for this
situation to avoid NULL pointer dereferences.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org # 4.0+
9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Wed, 22 Jul 2015 21:45:25 +0000 (14:45 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Don't use shared bluetooth antenna in iwlwifi driver for management
    frames, from Emmanuel Grumbach.

 2) Fix device ID check in ath9k driver, from Felix Fietkau.

 3) Off by one in xen-netback BUG checks, from Dan Carpenter.

 4) Fix IFLA_VF_PORT netlink attribute validation, from Daniel Borkmann.

 5) Fix races in setting peeked bit flag in SKBs during datagram
    receive.  If it's shared we have to clone it otherwise the value can
    easily be corrupted.  Fix from Herbert Xu.

 6) Revert fec clock handling change, causes regressions.  From Fabio
    Estevam.

 7) Fix use after free in fq_codel and sfq packet schedulers, from WANG
    Cong.

 8) ipvlan bug fixes (memory leaks, missing rcu_dereference_bh, etc.)
    from WANG Cong and Konstantin Khlebnikov.

 9) Memory leak in act_bpf packet action, from Alexei Starovoitov.

10) ARM bpf JIT bug fixes from Nicolas Schichan.

11) Fix backwards compat of ANY_LAYOUT in virtio_net driver, from
    Michael S Tsirkin.

12) Destruction of bond with different ARP header types not handled
    correctly, fix from Nikolay Aleksandrov.

13) Revert GRO receive support in ipv6 SIT tunnel driver, causes
    regressions because the GRO packets created cannot be processed
    properly on the GSO side if we forward the frame.  From Herbert Xu.

14) TCCR update race and other fixes to ravb driver from Sergei
    Shtylyov.

15) Fix SKB leaks in caif_queue_rcv_skb(), from Eric Dumazet.

16) Fix panics on packet scheduler filter replace, from Daniel Borkmann.

17) Make sure AF_PACKET sees properly IP headers in defragmented frames
    (via PACKET_FANOUT_FLAG_DEFRAG option), from Edward Hyunkoo Jee.

18) AF_NETLINK cannot hold mutex in RCU callback, fix from Florian
    Westphal.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (84 commits)
  ravb: fix ring memory allocation
  net: phy: dp83867: Fix warning check for setting the internal delay
  openvswitch: allocate nr_node_ids flow_stats instead of num_possible_nodes
  netlink: don't hold mutex in rcu callback when releasing mmapd ring
  ARM: net: fix vlan access instructions in ARM JIT.
  ARM: net: handle negative offsets in BPF JIT.
  ARM: net: fix condition for load_order > 0 when translating load instructions.
  tcp: suppress a division by zero warning
  drivers: net: cpsw: remove tx event processing in rx napi poll
  inet: frags: fix defragmented packet's IP header for af_packet
  net: mvneta: fix refilling for Rx DMA buffers
  stmmac: fix setting of driver data in stmmac_dvr_probe
  sched: cls_flow: fix panic on filter replace
  sched: cls_flower: fix panic on filter replace
  sched: cls_bpf: fix panic on filter replace
  net/mdio: fix mdio_bus_match for c45 PHY
  net: ratelimit warnings about dst entry refcount underflow or overflow
  caif: fix leaks and race in caif_queue_rcv_skb()
  qmi_wwan: add the second QMI/network interface for Sierra Wireless MC7305/MC7355
  ravb: fix race updating TCCR
  ...

9 years agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Wed, 22 Jul 2015 15:52:42 +0000 (08:52 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull ARM64 fixes from Catalin Marinas:

 - arm64 build fix following the move of the thread_struct to the end of
   task_struct and the asm offsets becoming too large for the AArch64
   ISA

 - preparatory patch for moving irq_data struct members (applied now to
   reduce dependency for the next merging window)

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  ARM64/irq: Use access helper irq_data_get_affinity_mask()
  arm64: switch_to: calculate cpu context pointer using separate register

9 years agonetfilter: nf_conntrack: Support expectations in different zones
Joe Stringer [Wed, 22 Jul 2015 04:37:31 +0000 (21:37 -0700)]
netfilter: nf_conntrack: Support expectations in different zones

When zones were originally introduced, the expectation functions were
all extended to perform lookup using the zone. However, insertion was
not modified to check the zone. This means that two expectations which
are intended to apply for different connections that have the same tuple
but exist in different zones cannot both be tracked.

Fixes: 5d0aa2ccd4 (netfilter: nf_conntrack: add support for "conntrack zones")
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
9 years agoARM64/irq: Use access helper irq_data_get_affinity_mask()
Jiang Liu [Mon, 13 Jul 2015 20:30:04 +0000 (20:30 +0000)]
ARM64/irq: Use access helper irq_data_get_affinity_mask()

This is a preparatory patch for moving irq_data struct members.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
9 years agoarm64: switch_to: calculate cpu context pointer using separate register
Will Deacon [Mon, 20 Jul 2015 14:14:53 +0000 (15:14 +0100)]
arm64: switch_to: calculate cpu context pointer using separate register

Commit 0c8c0f03e3a2 ("x86/fpu, sched: Dynamically allocate 'struct fpu'")
moved the thread_struct to the bottom of task_struct. As a result, the
offset is now too large to be used in an immediate add on arm64 with
some kernel configs:

arch/arm64/kernel/entry.S: Assembler messages:
arch/arm64/kernel/entry.S:588: Error: immediate out of range
arch/arm64/kernel/entry.S:597: Error: immediate out of range

This patch calculates the offset using an additional register instead of
an immediate offset.

Fixes: 0c8c0f03e3a2 ("x86/fpu, sched: Dynamically allocate 'struct fpu'")
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
9 years agoravb: fix ring memory allocation
Sergei Shtylyov [Tue, 21 Jul 2015 22:31:59 +0000 (01:31 +0300)]
ravb: fix ring memory allocation

The driver is written as if it can adapt to a low memory situation  allocating
less RX  skbs and TX aligned buffers than the respective RX/TX ring sizes.  In
reality  though  the driver  would malfunction in this case. Stop being overly
smart and just fail in such situation -- this is achieved by moving the memory
allocation from ravb_ring_format() to ravb_ring_init().

We leave dma_map_single() calls in place but make their failure non-fatal
by marking the corresponding RX descriptors  with zero data size which should
prevent DMA to an invalid addresses.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: phy: dp83867: Fix warning check for setting the internal delay
Dan Murphy [Tue, 21 Jul 2015 17:06:45 +0000 (12:06 -0500)]
net: phy: dp83867: Fix warning check for setting the internal delay

Fix warning: logical â€˜or’ of collectively exhaustive tests is always true

Change the internal delay check from an 'or' condition to an 'and'
condition.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: allocate nr_node_ids flow_stats instead of num_possible_nodes
Chris J Arges [Tue, 21 Jul 2015 17:36:33 +0000 (12:36 -0500)]
openvswitch: allocate nr_node_ids flow_stats instead of num_possible_nodes

Some architectures like POWER can have a NUMA node_possible_map that
contains sparse entries. This causes memory corruption with openvswitch
since it allocates flow_cache with a multiple of num_possible_nodes() and
assumes the node variable returned by for_each_node will index into
flow->stats[node].

Use nr_node_ids to allocate a maximal sparse array instead of
num_possible_nodes().

The crash was noticed after 3af229f2 was applied as it changed the
node_possible_map to match node_online_map on boot.
Fixes: 3af229f2071f5b5cb31664be6109561fbe19c861
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonetlink: don't hold mutex in rcu callback when releasing mmapd ring
Florian Westphal [Tue, 21 Jul 2015 14:33:50 +0000 (16:33 +0200)]
netlink: don't hold mutex in rcu callback when releasing mmapd ring

Kirill A. Shutemov says:

This simple test-case trigers few locking asserts in kernel:

int main(int argc, char **argv)
{
        unsigned int block_size = 16 * 4096;
        struct nl_mmap_req req = {
                .nm_block_size          = block_size,
                .nm_block_nr            = 64,
                .nm_frame_size          = 16384,
                .nm_frame_nr            = 64 * block_size / 16384,
        };
        unsigned int ring_size;
int fd;

fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC);
        if (setsockopt(fd, SOL_NETLINK, NETLINK_RX_RING, &req, sizeof(req)) < 0)
                exit(1);
        if (setsockopt(fd, SOL_NETLINK, NETLINK_TX_RING, &req, sizeof(req)) < 0)
                exit(1);

ring_size = req.nm_block_nr * req.nm_block_size;
mmap(NULL, 2 * ring_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
return 0;
}

+++ exited with 0 +++
BUG: sleeping function called from invalid context at /home/kas/git/public/linux-mm/kernel/locking/mutex.c:616
in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: init
3 locks held by init/1:
 #0:  (reboot_mutex){+.+...}, at: [<ffffffff81080959>] SyS_reboot+0xa9/0x220
 #1:  ((reboot_notifier_list).rwsem){.+.+..}, at: [<ffffffff8107f379>] __blocking_notifier_call_chain+0x39/0x70
 #2:  (rcu_callback){......}, at: [<ffffffff810d32e0>] rcu_do_batch.isra.49+0x160/0x10c0
Preemption disabled at:[<ffffffff8145365f>] __delay+0xf/0x20

CPU: 1 PID: 1 Comm: init Not tainted 4.1.0-00009-gbddf4c4818e0 #253
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Debian-1.8.2-1 04/01/2014
 ffff88017b3d8000 ffff88027bc03c38 ffffffff81929ceb 0000000000000102
 0000000000000000 ffff88027bc03c68 ffffffff81085a9d 0000000000000002
 ffffffff81ca2a20 0000000000000268 0000000000000000 ffff88027bc03c98
Call Trace:
 <IRQ>  [<ffffffff81929ceb>] dump_stack+0x4f/0x7b
 [<ffffffff81085a9d>] ___might_sleep+0x16d/0x270
 [<ffffffff81085bed>] __might_sleep+0x4d/0x90
 [<ffffffff8192e96f>] mutex_lock_nested+0x2f/0x430
 [<ffffffff81932fed>] ? _raw_spin_unlock_irqrestore+0x5d/0x80
 [<ffffffff81464143>] ? __this_cpu_preempt_check+0x13/0x20
 [<ffffffff8182fc3d>] netlink_set_ring+0x1ed/0x350
 [<ffffffff8182e000>] ? netlink_undo_bind+0x70/0x70
 [<ffffffff8182fe20>] netlink_sock_destruct+0x80/0x150
 [<ffffffff817e484d>] __sk_free+0x1d/0x160
 [<ffffffff817e49a9>] sk_free+0x19/0x20
[..]

Cong Wang says:

We can't hold mutex lock in a rcu callback, [..]

Thomas Graf says:

The socket should be dead at this point. It might be simpler to
add a netlink_release_ring() function which doesn't require
locking at all.

Reported-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Diagnosed-by: Cong Wang <cwang@twopensource.com>
Suggested-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'arm-bpf-fixes'
David S. Miller [Wed, 22 Jul 2015 05:19:55 +0000 (22:19 -0700)]
Merge branch 'arm-bpf-fixes'

Nicolas Schichan says:

====================
BPF JIT fixes for ARM

These patches are fixing bugs in the ARM JIT and should probably find
their way to a stable kernel. All 60 test_bpf tests in Linux 4.1 release
are now passing OK (was 54 out of 60 before).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoARM: net: fix vlan access instructions in ARM JIT.
Nicolas Schichan [Tue, 21 Jul 2015 12:14:14 +0000 (14:14 +0200)]
ARM: net: fix vlan access instructions in ARM JIT.

This makes BPF_ANC | SKF_AD_VLAN_TAG and BPF_ANC | SKF_AD_VLAN_TAG_PRESENT
have the same behaviour as the in kernel VM and makes the test_bpf LD_VLAN_TAG
and LD_VLAN_TAG_PRESENT tests pass.

Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoARM: net: handle negative offsets in BPF JIT.
Nicolas Schichan [Tue, 21 Jul 2015 12:14:13 +0000 (14:14 +0200)]
ARM: net: handle negative offsets in BPF JIT.

Previously, the JIT would reject negative offsets known during code
generation and mishandle negative offsets provided at runtime.

Fix that by calling bpf_internal_load_pointer_neg_helper()
appropriately in the jit_get_skb_{b,h,w} slow path helpers and by forcing
the execution flow to the slow path helpers when the offset is
negative.

Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoARM: net: fix condition for load_order > 0 when translating load instructions.
Nicolas Schichan [Tue, 21 Jul 2015 12:14:12 +0000 (14:14 +0200)]
ARM: net: fix condition for load_order > 0 when translating load instructions.

To check whether the load should take the fast path or not, the code
would check that (r_skb_hlen - load_order) is greater than the offset
of the access using an "Unsigned higher or same" condition. For
halfword accesses and an skb length of 1 at offset 0, that test is
valid, as we end up comparing 0xffffffff(-1) and 0, so the fast path
is taken and the filter allows the load to wrongly succeed. A similar
issue exists for word loads at offset 0 and an skb length of less than
4.

Fix that by using the condition "Signed greater than or equal"
condition for the fast path code for load orders greater than 0.

Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agotcp: suppress a division by zero warning
Eric Dumazet [Wed, 22 Jul 2015 05:02:00 +0000 (07:02 +0200)]
tcp: suppress a division by zero warning

Andrew Morton reported following warning on one ARM build
with gcc-4.4 :

net/ipv4/inet_hashtables.c: In function 'inet_ehash_locks_alloc':
net/ipv4/inet_hashtables.c:617: warning: division by zero

Even guarded with a test on sizeof(spinlock_t), compiler does not
like current construct on a !CONFIG_SMP build.

Remove the warning by using a temporary variable.

Fixes: 095dc8e0c368 ("tcp: fix/cleanup inet_ehash_locks_alloc()")
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoRevert "fsnotify: fix oops in fsnotify_clear_marks_by_group_flags()"
Linus Torvalds [Tue, 21 Jul 2015 23:06:53 +0000 (16:06 -0700)]
Revert "fsnotify: fix oops in fsnotify_clear_marks_by_group_flags()"

This reverts commit a2673b6e040663bf16a552f8619e6bde9f4b9acf.

Kinglong Mee reports a memory leak with that patch, and Jan Kara confirms:

 "Thanks for report! You are right that my patch introduces a race
  between fsnotify kthread and fsnotify_destroy_group() which can result
  in leaking inotify event on group destruction.

  I haven't yet decided whether the right fix is not to queue events for
  dying notification group (as that is pointless anyway) or whether we
  should just fix the original problem differently...  Whenever I look
  at fsnotify code mark handling I get lost in the maze of locks, lists,
  and subtle differences between how different notification systems
  handle notification marks :( I'll think about it over night"

and after thinking about it, Jan says:

 "OK, I have looked into the code some more and I found another
  relatively simple way of fixing the original oops.  It will be IMHO
  better than trying to fixup this issue which has more potential for
  breakage.  I'll ask Linus to revert the fsnotify fix he already merged
  and send a new fix"

Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Requested-by: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoMerge tag 'wireless-drivers-for-davem-2015-07-20' of git://git.kernel.org/pub/scm...
David S. Miller [Tue, 21 Jul 2015 23:06:39 +0000 (16:06 -0700)]
Merge tag 'wireless-drivers-for-davem-2015-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
ath9k:

* fix device ID check for AR956x

iwlwifi:

* bug fixes specific for 8000 series
* fix a crash in time events
* fix a crash in PCIe transport
* fix BT Coex code that prevented association on certain
  devices (3160).
* revert the new RBD allocation model because it introduced
  a bug when running on weak VM setups.
* new device IDs
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge tag 'pinctrl-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...
Linus Torvalds [Tue, 21 Jul 2015 22:27:27 +0000 (15:27 -0700)]
Merge tag 'pinctrl-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Here are some overly ripe pin control fixes for the v4.2 series.

  They got delayed because of various crap commits and having to clean
  and rinse the patch stack a few times.  Now they are however looking
  good.

   - some dead defines dropped from the Samsung driver, was targeted for
     -rc2 but got delayed
   - drop the strict mode from abx500, this was too strict
   - fix the R-Car sparse IRQs code to work as intended
   - fix the IRQ code for the pinctrl-single GPIO backend to not enforce
     threaded IRQs
   - clear the latched events/IRQs for the Broadcom BCM2835 driver
   - fix up debugfs for the Freescale imx1 driver
   - fix a typo bug in the Schmitt Trigger setup in the LPC18xx driver"

* tag 'pinctrl-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: lpc18xx: fix schmitt trigger setup
  Subject: pinctrl: imx1-core: Fix debug output in .pin_config_set callback
  pinctrl: bcm2835: Clear the event latch register when disabling interrupts
  pinctrl: single: ensure pcs irq will not be forced threaded
  sh-pfc: fix sparse GPIOs for R-Car SoCs
  pinctrl: abx500: remove strict mode
  pinctrl: samsung: Remove old unused defines

9 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Linus Torvalds [Tue, 21 Jul 2015 22:18:06 +0000 (15:18 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

Pull UDF fix from Jan Kara:
 "A fix for UDF corruption when certain disk-format feature is enabled"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Don't corrupt unalloc spacetable when writing it

9 years agoMerge tag 'trace-v4.2-rc2-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 21 Jul 2015 21:42:40 +0000 (14:42 -0700)]
Merge tag 'trace-v4.2-rc2-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing sample code fix from Steven Rostedt:
 "He Kuang noticed that the sample code using the trace_event helper
  function __get_dynamic_array_len() is broken.

  This only changes the sample code, and I'm pushing this now instead of
  later because I don't want others using the broken code as an example
  when using it for real"

* tag 'trace-v4.2-rc2-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix sample output of dynamic arrays

9 years agodrivers: net: cpsw: remove tx event processing in rx napi poll
Mugunthan V N [Tue, 21 Jul 2015 10:30:42 +0000 (16:00 +0530)]
drivers: net: cpsw: remove tx event processing in rx napi poll

With commit c03abd84634d ("net: ethernet: cpsw: don't requests IRQs
we don't use") common isr and napi are separated into separate tx isr
and rx isr/napi, but still in rx napi tx events are handled. So removing
the tx event handling in rx napi.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoinet: frags: fix defragmented packet's IP header for af_packet
Edward Hyunkoo Jee [Tue, 21 Jul 2015 07:43:59 +0000 (09:43 +0200)]
inet: frags: fix defragmented packet's IP header for af_packet

When ip_frag_queue() computes positions, it assumes that the passed
sk_buff does not contain L2 headers.

However, when PACKET_FANOUT_FLAG_DEFRAG is used, IP reassembly
functions can be called on outgoing packets that contain L2 headers.

Also, IPv4 checksum is not corrected after reassembly.

Fixes: 7736d33f4262 ("packet: Add pre-defragmentation support for ipv4 fanouts.")
Signed-off-by: Edward Hyunkoo Jee <edjee@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: mvneta: fix refilling for Rx DMA buffers
Simon Guinot [Sun, 19 Jul 2015 11:00:53 +0000 (13:00 +0200)]
net: mvneta: fix refilling for Rx DMA buffers

With the actual code, if a memory allocation error happens while
refilling a Rx descriptor, then the original Rx buffer is both passed
to the networking stack (in a SKB) and let in the Rx ring. This leads
to various kernel oops and crashes.

As a fix, this patch moves Rx descriptor refilling ahead of building
SKB with the associated Rx buffer. In case of a memory allocation
failure, data is dropped and the original DMA buffer is put back into
the Rx ring.

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Cc: <stable@vger.kernel.org> # v3.8+
Tested-by: Yoann Sculo <yoann@sculo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agostmmac: fix setting of driver data in stmmac_dvr_probe
Joachim Eastwood [Fri, 17 Jul 2015 21:48:17 +0000 (23:48 +0200)]
stmmac: fix setting of driver data in stmmac_dvr_probe

Commit 803f8fc46274b ("stmmac: move driver data setting into
stmmac_dvr_probe") mistakenly set priv and not priv->dev as
driver data. This meant that the remove, resume and suspend
callbacks that fetched and tried to use this data would most
likely explode. Fix the issue by using the correct variable.

Fixes: 803f8fc46274b ("stmmac: move driver data setting into stmmac_dvr_probe")
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'sch_panic'
David S. Miller [Tue, 21 Jul 2015 07:25:03 +0000 (00:25 -0700)]
Merge branch 'sch_panic'

Daniel Borkmann says:

====================
Couple of classifier fixes

This fixes a couple of panics in the form of (analogous for
cls_flow{,er}):

[  912.759276] BUG: unable to handle kernel NULL pointer dereference at (null)
[  912.759373] IP: [<ffffffffa09d4d6d>] cls_bpf_change+0x23d/0x268 [cls_bpf]
[  912.759441] PGD 8783c067 PUD 5f684067 PMD 0
[  912.759491] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC
[  912.759543] Modules linked in: cls_bpf(E) act_gact [...]
[  912.772734] CPU: 3 PID: 10489 Comm: tc Tainted: G        W   E   4.2.0-rc2+ #73
[  912.775004] Hardware name: Apple Inc. MacBookAir5,1/Mac-66F35F19FE2A0D05, BIOS MBA51.88Z.00EF.B02.1211271028 11/27/2012
[  912.777327] task: ffff88025eaa8000 ti: ffff88005f734000 task.ti: ffff88005f734000
[  912.779662] RIP: 0010:[<ffffffffa09d4d6d>]  [<ffffffffa09d4d6d>] cls_bpf_change+0x23d/0x268 [cls_bpf]
[  912.781991] RSP: 0018:ffff88005f7379c8  EFLAGS: 00010286
[  912.784183] RAX: ffff880201d64e48 RBX: 0000000000000000 RCX: ffff880201d64e40
[  912.786402] RDX: 0000000000000000 RSI: ffffffffa09d51c0 RDI: ffffffffa09d51a6
[  912.788625] RBP: ffff88005f737a68 R08: 0000000000000000 R09: 0000000000000000
[  912.790854] R10: 0000000000000001 R11: 0000000000000001 R12: ffff880078ab5a80
[  912.793082] R13: ffff880232b31570 R14: ffff88005f737ae0 R15: ffff8801e215d1d0
[  912.795181] FS:  00007f3c0c80d740(0000) GS:ffff880265400000(0000) knlGS:0000000000000000
[  912.797281] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  912.799402] CR2: 0000000000000000 CR3: 000000005460f000 CR4: 00000000001407e0
[  912.799403] Stack:
[  912.799407]  ffffffff00000000 ffff88023ea18000 000000005f737a08 0000000000000000
[  912.799415]  ffffffff81f06140 ffff880201d64e40 0000000000000000 ffff88023ea1804c
[  912.799418]  0000000000000000 ffff88023ea18044 ffff88023ea18030 ffff88023ea18038
[  912.799418] Call Trace:
[  912.799437]  [<ffffffff816d5685>] tc_ctl_tfilter+0x335/0x910
[  912.799443]  [<ffffffff813622a8>] ? security_capable+0x48/0x60
[  912.799448]  [<ffffffff816b90e5>] rtnetlink_rcv_msg+0x95/0x240
[  912.799454]  [<ffffffff810f612d>] ? trace_hardirqs_on+0xd/0x10
[  912.799456]  [<ffffffff816b902f>] ? rtnetlink_rcv+0x1f/0x40
[  912.799459]  [<ffffffff816b902f>] ? rtnetlink_rcv+0x1f/0x40
[  912.799461]  [<ffffffff816b9050>] ? rtnetlink_rcv+0x40/0x40
[  912.799464]  [<ffffffff816df38f>] netlink_rcv_skb+0xaf/0xc0
[  912.799467]  [<ffffffff816b903e>] rtnetlink_rcv+0x2e/0x40
[  912.799469]  [<ffffffff816deaef>] netlink_unicast+0xef/0x1b0
[  912.799471]  [<ffffffff816defa0>] netlink_sendmsg+0x3f0/0x620
[  912.799476]  [<ffffffff81687028>] sock_sendmsg+0x38/0x50
[  912.799479]  [<ffffffff81687938>] ___sys_sendmsg+0x288/0x290
[  912.799482]  [<ffffffff810f7852>] ? __lock_acquire+0x572/0x2050
[  912.799488]  [<ffffffff810265db>] ? native_sched_clock+0x2b/0x90
[  912.799493]  [<ffffffff8116135f>] ? __audit_syscall_entry+0xaf/0x100
[  912.799497]  [<ffffffff8116135f>] ? __audit_syscall_entry+0xaf/0x100
[  912.799501]  [<ffffffff8112aa19>] ? current_kernel_time+0x69/0xd0
[  912.799505]  [<ffffffff81266f16>] ? __fget_light+0x66/0x90
[  912.799508]  [<ffffffff81688812>] __sys_sendmsg+0x42/0x80
[  912.799510]  [<ffffffff81688862>] SyS_sendmsg+0x12/0x20
[  912.799515]  [<ffffffff817f9a6e>] entry_SYSCALL_64_fastpath+0x12/0x76
[  912.799540] Code: 4d 88 49 8b 57 08 48 89 51 08 49 8b 57 10 48 89 c8 48 83 c0 08 48
                     89 51 10 48 8b 51 10 48 c7 c6 c0 51 9d a0 48 c7 c7 a6 51 9d a0 <48>
                     89 02 48 8b 51 08 48 89 42 08 48 b8 00 02 20 00 00 00 ad de
[  912.799544] RIP  [<ffffffffa09d4d6d>] cls_bpf_change+0x23d/0x268 [cls_bpf]
[  912.799544]  RSP <ffff88005f7379c8>
[  912.799545] CR2: 0000000000000000
[  912.807380] ---[ end trace a6440067cfdc7c29 ]---

I've split them into 3 patches, so they can be backported easier
when needed.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agosched: cls_flow: fix panic on filter replace
Daniel Borkmann [Fri, 17 Jul 2015 20:38:45 +0000 (22:38 +0200)]
sched: cls_flow: fix panic on filter replace

The following test case causes a NULL pointer dereference in cls_flow:

  tc filter add dev foo parent 1: handle 0x1 flow hash keys dst action ok
  tc filter replace dev foo parent 1: pref 49152 handle 0x1 \
            flow hash keys mark action drop

To be more precise, actually two different panics are fixed, the first
occurs because tcf_exts_init() is not called on the newly allocated
filter when we do a replace. And the second panic uncovered after that
happens since the arguments of list_replace_rcu() are swapped, the old
element needs to be the first argument and the new element the second.

Fixes: 70da9f0bf999 ("net: sched: cls_flow use RCU")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agosched: cls_flower: fix panic on filter replace
Daniel Borkmann [Fri, 17 Jul 2015 20:38:44 +0000 (22:38 +0200)]
sched: cls_flower: fix panic on filter replace

The following test case causes a NULL pointer dereference in cls_flower:

  tc filter add dev foo parent 1: flower eth_type ipv4 action ok flowid 1:1
  tc filter replace dev foo parent 1: pref 49152 handle 0x1 \
            flower eth_type ipv6 action ok flowid 1:1

The problem is that commit 77b9900ef53a ("tc: introduce Flower classifier")
accidentally swapped the arguments of list_replace_rcu(), the old
element needs to be the first argument and the new element the second.

Fixes: 77b9900ef53a ("tc: introduce Flower classifier")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agosched: cls_bpf: fix panic on filter replace
Daniel Borkmann [Fri, 17 Jul 2015 20:38:43 +0000 (22:38 +0200)]
sched: cls_bpf: fix panic on filter replace

The following test case causes a NULL pointer dereference in cls_bpf:

  FOO="1,6 0 0 4294967295,"
  tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 action ok
  tc filter replace dev foo parent 1: pref 49152 handle 0x1 \
            bpf bytecode "$FOO" flowid 1:1 action drop

The problem is that commit 1f947bf151e9 ("net: sched: rcu'ify cls_bpf")
accidentally swapped the arguments of list_replace_rcu(), the old
element needs to be the first argument and the new element the second.

Fixes: 1f947bf151e9 ("net: sched: rcu'ify cls_bpf")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge tag 'mac80211-for-davem-2015-07-17' of git://git.kernel.org/pub/scm/linux/kerne...
David S. Miller [Tue, 21 Jul 2015 07:17:53 +0000 (00:17 -0700)]
Merge tag 'mac80211-for-davem-2015-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Some fixes for the current cycle:

 1. Arik introduced an rtnl-locked regulatory API to be able
    to differentiate between place do/don't have the RTNL;
    this fixes missing locking in some of the code paths

 2. Two small mesh bugfixes from Bob, one to avoid treating
    a certain malformed over-the-air frame and one to avoid
    sending a garbage field over the air.

 3. A fix for powersave during WoWLAN suspend from Krishna Chaitanya.

 4. A fix for a powersave vs. aggregation teardown race, from Michal.

 5. Thomas reduced the loglevel of CRDA messages to avoid spamming
    the kernel log with mostly irrelevant information.

 6. Tom fixed a dangling debugfs directory pointer that could cause
    crashes if subsequent addition of the same interface to debugfs
    failed for some reason.

 7. A fix from myself for a list corruption issue in mac80211 during
    combined interface shutdown/removal - shut down interfaces first
    and only then remove them to avoid that.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mdio: fix mdio_bus_match for c45 PHY
Shaohui Xie [Fri, 17 Jul 2015 10:07:19 +0000 (18:07 +0800)]
net/mdio: fix mdio_bus_match for c45 PHY

We store c45 PHY's id information in c45_ids, so it should be used to
check the matching between PHY driver and PHY device for c45 PHY.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: ratelimit warnings about dst entry refcount underflow or overflow
Konstantin Khlebnikov [Fri, 17 Jul 2015 11:01:11 +0000 (14:01 +0300)]
net: ratelimit warnings about dst entry refcount underflow or overflow

Kernel generates a lot of warnings when dst entry reference counter
overflows and becomes negative. That bug was seen several times at
machines with outdated 3.10.y kernels. Most like it's already fixed
in upstream. Anyway that flood completely kills machine and makes
further debugging impossible.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agocaif: fix leaks and race in caif_queue_rcv_skb()
Eric Dumazet [Fri, 17 Jul 2015 08:19:23 +0000 (10:19 +0200)]
caif: fix leaks and race in caif_queue_rcv_skb()

1) If sk_filter() is applied, skb was leaked (not freed)
2) Testing SOCK_DEAD twice is racy :
   packet could be freed while already queued.
3) Remove obsolete comment about caching skb->len

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoqmi_wwan: add the second QMI/network interface for Sierra Wireless MC7305/MC7355
Reinhard Speyerer [Thu, 16 Jul 2015 21:28:14 +0000 (23:28 +0200)]
qmi_wwan: add the second QMI/network interface for Sierra Wireless MC7305/MC7355

Sierra Wireless MC7305/MC7355 with USB ID 1199:9041 also provide a
second QMI/network interface like the MC73xx with USB ID 1199:68c0 on
USB interface #10 when used in the appropriate USB configuration.
Add the corresponding QMI_FIXED_INTF entry to the qmi_wwan driver.

Please note that the second QMI/network interface is not working for
early MC73xx firmware versions like 01.08.x as the device does not
respond to QMI messages on the second /dev/cdc-wdm port.

Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoravb: fix race updating TCCR
Sergei Shtylyov [Thu, 16 Jul 2015 21:28:38 +0000 (00:28 +0300)]
ravb: fix race updating TCCR

The TCCR.TSRQn bit may get clearead after TCCR gets read, so that TCCR write
would get skipped. We don't need to check this bit before setting.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: netcp: fix improper initialization in netcp_ndo_open()
Karicheri, Muralidharan [Thu, 16 Jul 2015 19:32:14 +0000 (15:32 -0400)]
net: netcp: fix improper initialization in netcp_ndo_open()

The keystone qmss will raise interrupt when packet arrive at the
receive queue. Only control available to avoid interrupt from happening
is to keep the free descriptor queue (FDQ) empty in the receive side.
So the filling of descriptors into the FDQ has to happen after
request_irq() call is made as part of knav_queue_enable_notify(). So
move the function netcp_rxpool_refill() after this call.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobonding: correct the MAC address for "follow" fail_over_mac policy
dingtianhong [Thu, 16 Jul 2015 08:30:02 +0000 (16:30 +0800)]
bonding: correct the MAC address for "follow" fail_over_mac policy

The "follow" fail_over_mac policy is useful for multiport devices that
either become confused or incur a performance penalty when multiple
ports are programmed with the same MAC address, but the same MAC
address still may happened by this steps for this policy:

1) echo +eth0 > /sys/class/net/bond0/bonding/slaves
   bond0 has the same mac address with eth0, it is MAC1.

2) echo +eth1 > /sys/class/net/bond0/bonding/slaves
   eth1 is backup, eth1 has MAC2.

3) ifconfig eth0 down
   eth1 became active slave, bond will swap MAC for eth0 and eth1,
   so eth1 has MAC1, and eth0 has MAC2.

4) ifconfig eth1 down
   there is no active slave, and eth1 still has MAC1, eth2 has MAC2.

5) ifconfig eth0 up
   the eth0 became active slave again, the bond set eth0 to MAC1.

Something wrong here, then if you set eth1 up, the eth0 and eth1 will have the same
MAC address, it will break this policy for ACTIVE_BACKUP mode.

This patch will fix this problem by finding the old active slave and
swap them MAC address before change active slave.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Tested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge tag 'linux-can-fixes-for-4.2-20150716' of git://git.kernel.org/pub/scm/linux...
David S. Miller [Tue, 21 Jul 2015 03:25:59 +0000 (20:25 -0700)]
Merge tag 'linux-can-fixes-for-4.2-20150716' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2015-07-16

this is a pull request of 2 patches by Stefan Agner. He fixes the resume
operation in the mcp251x driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoRevert "sit: Add gro callbacks to sit_offload"
Herbert Xu [Mon, 20 Jul 2015 09:55:38 +0000 (17:55 +0800)]
Revert "sit: Add gro callbacks to sit_offload"

This patch reverts 19424e052fb44da2f00d1a868cbb51f3e9f4bbb5 ("sit:
Add gro callbacks to sit_offload") because it generates packets
that cannot be handled even by our own GSO.

Reported-by: Wolfgang Walter <linux@stwm.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: dsa: bcm_sf2: do not use indirect reads and writes for 7445E0
Florian Fainelli [Wed, 15 Jul 2015 23:09:32 +0000 (16:09 -0700)]
net: dsa: bcm_sf2: do not use indirect reads and writes for 7445E0

7445E0 contains an ECO which disconnected the internal SF2 pseudo-PHY which was
known to conflict with the external pseudo-PHY of BCM53125 switches. This
motivated the need to utilize the internal SF2 MDIO controller via indirect
register reads/writes to control external Broadcom switches due to this address
conflict (both responded at address 30d).

For 7445E0, the internal pseudo-PHY of the SF2 switch got disconnected, and as
a consequence this prevents the internal SF2 MDIO bus controller from reading
data (reads back everything as 0) since the MDI line is tied low.

Fix this by making the indirect register reads and writes conditional to
7445D0, on 7445E0 we can utilize the SWITCH_MDIO controller (backed by
mdio-unimac and not the DSA created slave MII bus).

We utilize of_machine_is_compatible() here since this is the only way for use
to differentiate between these two chips in a way that does not violate layers
or becomes (too) vendor-specific.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobonding: correctly handle bonding type change on enslave failure
Nikolay Aleksandrov [Wed, 15 Jul 2015 20:57:01 +0000 (22:57 +0200)]
bonding: correctly handle bonding type change on enslave failure

If the bond is enslaving a device with different type it will be setup
by it, but if after being setup the enslave fails the bond doesn't
switch back its type and also keeps pointers to foreign structures that can
be long gone. Thus revert back any type changes if the enslave failed and
the bond had to change its type.
Example:
 Before patch:
$ echo lo > bond0/bonding/slaves
-bash: echo: write error: Cannot assign requested address
$ ip l sh bond0
20: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default
    link/loopback 16:54:78:34:bd:41 brd 00:00:00:00:00:00
$ echo +eth1 > bond0/bonding/slaves
$ ip l sh bond0
20: bond0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
    link/ether 52:54:00:3f:47:69 brd ff:ff:ff:ff:ff:ff
(notice the MASTER flag is gone)

 After patch:
$ echo lo > bond0/bonding/slaves
-bash: echo: write error: Cannot assign requested address
$ ip l sh bond0
21: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default qlen 1000
    link/ether 6e:66:94:f6:07:fc brd ff:ff:ff:ff:ff:ff
$ echo +eth1 > bond0/bonding/slaves
$ ip l sh bond0
21: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default qlen 1000
    link/ether 52:54:00:3f:47:69 brd ff:ff:ff:ff:ff:ff

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type")
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobonding: fix destruction of bond with devices different from arphrd_ether
Nikolay Aleksandrov [Wed, 15 Jul 2015 19:52:51 +0000 (21:52 +0200)]
bonding: fix destruction of bond with devices different from arphrd_ether

When the bonding is being unloaded and the netdevice notifier is
unregistered it executes NETDEV_UNREGISTER for each device which should
remove the bond's proc entry but if the device enslaved is not of
ARPHRD_ETHER type and is in front of the bonding, it may execute
bond_release_and_destroy() first which would release the last slave and
destroy the bond device leaving the proc entry and thus we will get the
following error (with dynamic debug on for bond_netdev_event to see the
events order):
[  908.963051] eql: event: 9
[  908.963052] eql: IFF_SLAVE
[  908.963054] eql: event: 2
[  908.963056] eql: IFF_SLAVE
[  908.963058] eql: event: 6
[  908.963059] eql: IFF_SLAVE
[  908.963110] bond0: Releasing active interface eql
[  908.976168] bond0: Destroying bond bond0
[  908.976266] bond0 (unregistering): Released all slaves
[  908.984097] ------------[ cut here ]------------
[  908.984107] WARNING: CPU: 0 PID: 1787 at fs/proc/generic.c:575
remove_proc_entry+0x112/0x160()
[  908.984110] remove_proc_entry: removing non-empty directory
'net/bonding', leaking at least 'bond0'
[  908.984111] Modules linked in: bonding(-) eql(O) 9p nfsd auth_rpcgss
oid_registry nfs_acl nfs lockd grace fscache sunrpc crct10dif_pclmul
crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev qxl drm_kms_helper
snd_hda_codec_generic aesni_intel ttm aes_x86_64 glue_helper pcspkr lrw
gf128mul ablk_helper cryptd snd_hda_intel virtio_console snd_hda_codec
psmouse serio_raw snd_hwdep snd_hda_core 9pnet_virtio 9pnet evdev joydev
drm virtio_balloon snd_pcm snd_timer snd soundcore i2c_piix4 i2c_core
pvpanic acpi_cpufreq parport_pc parport processor thermal_sys button
autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid hid sg sr_mod cdrom
ata_generic virtio_blk virtio_net floppy ata_piix e1000 libata ehci_pci
virtio_pci scsi_mod uhci_hcd ehci_hcd virtio_ring virtio usbcore
usb_common [last unloaded: bonding]

[  908.984168] CPU: 0 PID: 1787 Comm: rmmod Tainted: G        W  O
4.2.0-rc2+ #8
[  908.984170] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  908.984172]  0000000000000000 ffffffff81732d41 ffffffff81525b34
ffff8800358dfda8
[  908.984175]  ffffffff8106c521 ffff88003595af78 ffff88003595af40
ffff88003e3a4280
[  908.984178]  ffffffffa058d040 0000000000000000 ffffffff8106c59a
ffffffff8172ebd0
[  908.984181] Call Trace:
[  908.984188]  [<ffffffff81525b34>] ? dump_stack+0x40/0x50
[  908.984193]  [<ffffffff8106c521>] ? warn_slowpath_common+0x81/0xb0
[  908.984196]  [<ffffffff8106c59a>] ? warn_slowpath_fmt+0x4a/0x50
[  908.984199]  [<ffffffff81218352>] ? remove_proc_entry+0x112/0x160
[  908.984205]  [<ffffffffa05850e6>] ? bond_destroy_proc_dir+0x26/0x30
[bonding]
[  908.984208]  [<ffffffffa057540e>] ? bond_net_exit+0x8e/0xa0 [bonding]
[  908.984217]  [<ffffffff8142f407>] ? ops_exit_list.isra.4+0x37/0x70
[  908.984225]  [<ffffffff8142f52d>] ?
unregister_pernet_operations+0x8d/0xd0
[  908.984228]  [<ffffffff8142f58d>] ?
unregister_pernet_subsys+0x1d/0x30
[  908.984232]  [<ffffffffa0585269>] ? bonding_exit+0x23/0xdba [bonding]
[  908.984236]  [<ffffffff810e28ba>] ? SyS_delete_module+0x18a/0x250
[  908.984241]  [<ffffffff81086f99>] ? task_work_run+0x89/0xc0
[  908.984244]  [<ffffffff8152b732>] ?
entry_SYSCALL_64_fastpath+0x16/0x75
[  908.984247] ---[ end trace 7c006ed4abbef24b ]---

Thus remove the proc entry manually if bond_release_and_destroy() is
used. Because of the checks in bond_remove_proc_entry() it's not a
problem for a bond device to change namespaces (the bug fixed by the
Fixes commit) but since commit
f9399814927ad ("bonding: Don't allow bond devices to change network
namespaces.") that can't happen anyway.

Reported-by: Carol Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: a64d49c3dd50 ("bonding: Manage /proc/net/bonding/ entries from
                      the netdev events")
Tested-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: dsa: mv88e6xxx: fix fid_mask when leaving bridge
Vivien Didelot [Wed, 15 Jul 2015 14:07:07 +0000 (10:07 -0400)]
net: dsa: mv88e6xxx: fix fid_mask when leaving bridge

The mv88e6xxx_priv_state structure contains an fid_mask, where 1 means
the FID is free to use, 0 means the FID is in use.

This patch fixes the bit clear in mv88e6xxx_leave_bridge() when
assigning a new FID to a port.

Example scenario: I have 7 ports, port 5 is CPU, port 6 is unused (no
PHY). After setting the ports 0, 1 and 2 in bridge br0, and ports 3 and
4 in bridge br1, I have the following fid_mask: 0b111110010110 (0xf96).

Indeed, br0 uses FID 0, and br1 uses FID 3.

After setting nomaster for port 0, I get the wrong fid_mask: 0b10 (0x2).

With this patch we correctly get 0b111110010100 (0xf94), meaning port 0
uses FID 1, br0 uses FID 0, and br1 uses FID 3.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agovirtio_net: don't require ANY_LAYOUT with VERSION_1
Michael S. Tsirkin [Wed, 15 Jul 2015 12:26:19 +0000 (15:26 +0300)]
virtio_net: don't require ANY_LAYOUT with VERSION_1

ANY_LAYOUT is a compatibility feature. It's implied
for VERSION_1 devices, and non-transitional devices
might not offer it. Change code to behave accordingly.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Mon, 20 Jul 2015 19:18:40 +0000 (12:18 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fix from Martin Schwidefsky:
 "Fast path fix for the thread_struct breakage"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: adapt entry.S to the move of thread_struct

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt...
Linus Torvalds [Mon, 20 Jul 2015 19:17:55 +0000 (12:17 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32

Pull AVR32 update from Hans-Christian Egtvedt.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  AVR32/time: Migrate to new 'set-state' interface

9 years agoMerge tag 'ipvs-fixes-for-v4.2' of https://git.kernel.org/pub/scm/linux/kernel/git...
Pablo Neira Ayuso [Mon, 20 Jul 2015 13:00:28 +0000 (15:00 +0200)]
Merge tag 'ipvs-fixes-for-v4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs

Simon Horman says:

====================
IPVS Fixes for v4.2

please consider this fix for v4.2.
For reasons that are not clear to me it is a bumper crop.

It seems to me that they are all relevant to stable.
Please let me know if you need my help to get the fixes into stable.

* ipvs: fix ipv6 route unreach panic

  This problem appears to be present since IPv6 support was added to
  IPVS in v2.6.28.

* ipvs: skb_orphan in case of forwarding

  This appears to resolve a problem resulting from a side effect of
  41063e9dd119 ("ipv4: Early TCP socket demux.") which was included in v3.6.

* ipvs: do not use random local source address for tunnels

  This appears to resolve a problem introduced by
  026ace060dfe ("ipvs: optimize dst usage for real server") in v3.10.

* ipvs: fix crash if scheduler is changed

  This appears to resolve a problem introduced by
  ceec4c381681 ("ipvs: convert services to rcu") in v3.10.

  Julian has provided backports of the fix:
  * [PATCHv2 3.10.81] ipvs: fix crash if scheduler is changed
    http://www.spinics.net/lists/lvs-devel/msg04008.html
  * [PATCHv2 3.12.44,3.14.45,3.18.16,4.0.6] ipvs: fix crash if scheduler is changed
    http://www.spinics.net/lists/lvs-devel/msg04007.html

  Please let me know how you would like to handle guiding these
  backports into stable.

* ipvs: fix crash with sync protocol v0 and FTP

  This appears to resolve a problem introduced by
  749c42b620a9 ("ipvs: reduce sync rate with time thresholds") in v3.5
====================

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
9 years agonetfilter: fix netns dependencies with conntrack templates
Pablo Neira Ayuso [Mon, 13 Jul 2015 13:11:48 +0000 (15:11 +0200)]
netfilter: fix netns dependencies with conntrack templates

Quoting Daniel Borkmann:

"When adding connection tracking template rules to a netns, f.e. to
configure netfilter zones, the kernel will endlessly busy-loop as soon
as we try to delete the given netns in case there's at least one
template present, which is problematic i.e. if there is such bravery that
the priviledged user inside the netns is assumed untrusted.

Minimal example:

  ip netns add foo
  ip netns exec foo iptables -t raw -A PREROUTING -d 1.2.3.4 -j CT --zone 1
  ip netns del foo

What happens is that when nf_ct_iterate_cleanup() is being called from
nf_conntrack_cleanup_net_list() for a provided netns, we always end up
with a net->ct.count > 0 and thus jump back to i_see_dead_people. We
don't get a soft-lockup as we still have a schedule() point, but the
serving CPU spins on 100% from that point onwards.

Since templates are normally allocated with nf_conntrack_alloc(), we
also bump net->ct.count. The issue why they are not yet nf_ct_put() is
because the per netns .exit() handler from x_tables (which would eventually
invoke xt_CT's xt_ct_tg_destroy() that drops reference on info->ct) is
called in the dependency chain at a *later* point in time than the per
netns .exit() handler for the connection tracker.

This is clearly a chicken'n'egg problem: after the connection tracker
.exit() handler, we've teared down all the connection tracking
infrastructure already, so rightfully, xt_ct_tg_destroy() cannot be
invoked at a later point in time during the netns cleanup, as that would
lead to a use-after-free. At the same time, we cannot make x_tables depend
on the connection tracker module, so that the xt_ct_tg_destroy() would
be invoked earlier in the cleanup chain."

Daniel confirms this has to do with the order in which modules are loaded or
having compiled nf_conntrack as modules while x_tables built-in. So we have no
guarantees regarding the order in which netns callbacks are executed.

Fix this by allocating the templates through kmalloc() from the respective
SYNPROXY and CT targets, so they don't depend on the conntrack kmem cache.
Then, release then via nf_ct_tmpl_free() from destroy_conntrack(). This branch
is marked as unlikely since conntrack templates are rarely allocated and only
from the configuration plane path.

Note that templates are not kept in any list to avoid further dependencies with
nf_conntrack anymore, thus, the tmpl larval list is removed.

Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
9 years agos390: adapt entry.S to the move of thread_struct
Martin Schwidefsky [Mon, 20 Jul 2015 08:01:46 +0000 (10:01 +0200)]
s390: adapt entry.S to the move of thread_struct

git commit 0c8c0f03e3a292e031596484275c14cf39c0ab7a
"x86/fpu, sched: Dynamically allocate 'struct fpu'"
moved the thread_struct to the end of the task_struct.

This causes some of the offsets used in entry.S to overflow their
instruction operand field. To fix this  use aghi to create a
dedicated pointer for the thread_struct.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>