csid_isr() only checks for the reset irq, so enabling any other irqs
doesn't make sense. The "RDI irq" comment is also wrong, the register
should be CSID_CSI2_RDIN_IRQ_MASK. Without this fix there may be an
excessive amount of irqs.
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Robert Foss <robert.foss@linaro.org> Tested-by: Julian Grahsl <jgrahsl@snap.com> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit a3b104487f745fd17f657d60af491ec6f1d0b27a) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
vb2_dma_contig_set_max_seg_size need to have a size in parameter and not
a DMA_BIT_MASK().
While fixing this issue, also fix error handling of all DMA size
setting.
Reported-by: kernel test robot <lkp@intel.com> Fixes: d4ae3689226e5 ("media: zoran: device support only 32bit DMA address") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 0ac903a7bde995f4a08ad406587bef31ef8ece49) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
GPIO_ALIVE and GPIO_CMGP blocks in Exynos850 SoC don't have EINT
capabilities (like EINT_SVC register), and there are no corresponding
interrupts wired to GIC. Instead those blocks have wake-up interrupts
for each pin. The ".eint_gpio_init" callbacks were specified by mistake
for these blocks, when porting pinctrl code from downstream kernel. That
leads to error messages like this:
samsung-pinctrl 11850000.pinctrl: irq number not available
Remove ".eint_gpio_init" for pinctrl_alive and pinctrl_gpmc to fix this
error. This change doesn't affect proper interrupt handling for related
pins, as all those pins are handled in ".eint_wkup_init".
Fixes: cdd3d945dcec ("pinctrl: samsung: Add Exynos850 SoC specific data") Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20220114203757.4860-1-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit b84343a9d6765cfc3298c0de3a0ac623a48d5e55) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In function kunit_test_timeout, it is declared "300 * MSEC_PER_SEC"
represent 5min. However, it is wrong when dealing with arm64 whose
default HZ = 250, or some other situations. Use msecs_to_jiffies to fix
this, and kunit_test_timeout will work as desired.
Link: https://lkml.kernel.org/r/20220309083753.1561921-3-liupeng256@huawei.com Fixes: 5f3e06208920 ("kunit: test: add support for test abort") Signed-off-by: Peng Liu <liupeng256@huawei.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Tested-by: Brendan Higgins <brendanhiggins@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Wang Kefeng <wangkefeng.wang@huawei.com> Cc: David Gow <davidgow@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 9a24d035c5eb0fa095e4fed967824846ba2cb13f) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If register_memory() fails, we freed the memory block but already added
the memory block to the group list, not good. Let's defer adding the
block to the memory group to after registering the memory block device.
We do handle it properly during unregister_memory(), but that's not
called when the registration fails.
Link: https://lkml.kernel.org/r/20220128144540.153902-1-david@redhat.com Fixes: 028fc57a1c36 ("drivers/base/memory: introduce "memory groups" to logically group memory blocks") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 9ca7b59e787710a711a9e0763237227b2ae45653) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The $(CC) variable used in Makefiles could contain several arguments
such as "ccache gcc". These need to be passed as a single string to
check_cc.sh, otherwise only the first argument will be used as the
compiler command. Without quotes, the $(CC) variable is passed as
distinct arguments which causes the script to fail to build trivial
programs.
Fix this by adding quotes around $(CC) when calling check_cc.sh to pass
the whole string as a single argument to the script even if it has
several words such as "ccache gcc".
Link: https://lkml.kernel.org/r/d0d460d7be0107a69e3c52477761a6fe694c1840.1646991629.git.guillaume.tucker@collabora.com Fixes: e9886ace222e ("selftests, x86: Rework x86 target architecture detection") Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com> Tested-by: "kernelci.org bot" <bot@kernelci.org> Reviewed-by: Guenter Roeck <groeck@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 5bed6c2c1ffe5cd99bb79eb28c10494578490743) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When compressed file has blocks, f2fs_ioc_start_atomic_write will succeed,
but compressed flag will be remained in inode. If write partial compreseed
cluster and commit atomic write will cause data corruption.
This is the reproduction process:
Step 1:
create a compressed file ,write 64K data , call fsync(), then the blocks
are write as compressed cluster.
Step2:
iotcl(F2FS_IOC_START_ATOMIC_WRITE) --- this should be fail, but not.
write page 0 and page 3.
iotcl(F2FS_IOC_COMMIT_ATOMIC_WRITE) -- page 0 and 3 write as normal file,
Step3:
drop cache.
read page 0-4 -- Since page 0 has a valid block address, read as
non-compressed cluster, page 1 and 2 will be filled with compressed data
or zero.
The root cause is, after commit 7eab7a696827 ("f2fs: compress: remove
unneeded read when rewrite whole cluster"), in step 2, f2fs_write_begin()
only set target page dirty, and in f2fs_commit_inmem_pages(), we will write
partial raw pages into compressed cluster, result in corrupting compressed
cluster layout.
Fixes: 4c8ff7095bef ("f2fs: support data compression") Fixes: 7eab7a696827 ("f2fs: compress: remove unneeded read when rewrite whole cluster") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Fengnan Chang <changfengnan@vivo.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 0f42a02e4773efc4f1edf202fc73d0cd14e8fb09) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When reflinking an inline extent, we assert that its file offset is 0 and
that its uncompressed length is not greater than the sector size. We then
return an error if one of those conditions is not satisfied. However we
use a return statement, which results in returning from btrfs_clone()
without freeing the path and buffer that were allocated before, as well as
not clearing the flag BTRFS_INODE_NO_DELALLOC_FLUSH for the destination
inode.
Fix that by jumping to the 'out' label instead, and also add a WARN_ON()
for each condition so that in case assertions are disabled, we get to
known which of the unexpected conditions triggered the error.
Fixes: a61e1e0df9f321 ("Btrfs: simplify inline extent handling when doing reflinks") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 1a97987f76b404c684caaba15485d0412923c621) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Quoted from Jing Xia's report, there is a potential deadlock may happen
between kworker and checkpoint as below:
[T:writeback] [T:checkpoint]
- wb_writeback
- blk_start_plug
bio contains NodeA was plugged in writeback threads
- do_writepages -- sync write inodeB, inc wb_sync_req[DATA]
- f2fs_write_data_pages
- f2fs_write_single_data_page -- write last dirty page
- f2fs_do_write_data_page
- set_page_writeback -- clear page dirty flag and
PAGECACHE_TAG_DIRTY tag in radix tree
- f2fs_outplace_write_data
- f2fs_update_data_blkaddr
- f2fs_wait_on_page_writeback -- wait NodeA to writeback here
- inode_dec_dirty_pages
- writeback_sb_inodes
- writeback_single_inode
- do_writepages
- f2fs_write_data_pages -- skip writepages due to wb_sync_req[DATA]
- wbc->pages_skipped += get_dirty_pages() -- PAGECACHE_TAG_DIRTY is not set but get_dirty_pages() returns one
- requeue_inode -- requeue inode to wb->b_dirty queue due to non-zero.pages_skipped
- blk_finish_plug
Let's try to avoid deadlock condition by forcing unplugging previous bio via
blk_finish_plug(current->plug) once we'v skipped writeback in writepages()
due to valid sbi->wb_sync_req[DATA/NODE].
Fixes: 687de7f1010c ("f2fs: avoid IO split due to mixed WB_SYNC_ALL and WB_SYNC_NONE") Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com> Signed-off-by: Jing Xia <jing.xia@unisoc.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 2911ad0249c5ab50afc640982811f11896233b65) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
John reported that push_rt_task() can end up invoking
find_lowest_rq(rq->curr) when curr is not an RT task (in this case a CFS
one), which causes mayhem down convert_prio().
This can happen when current gets demoted to e.g. CFS when releasing an
rt_mutex, and the local CPU gets hit with an rto_push_work irqwork before
getting the chance to reschedule. Exactly who triggers this work isn't
entirely clear to me - switched_from_rt() only invokes rt_queue_pull_task()
if there are no RT tasks on the local RQ, which means the local CPU can't
be in the rto_mask.
My current suspected sequence is something along the lines of the below,
with the demoted task being current.
mark_wakeup_next_waiter()
rt_mutex_adjust_prio()
rt_mutex_setprio() // deboost originally-CFS task
check_class_changed()
switched_from_rt() // Only rt_queue_pull_task() if !rq->rt.rt_nr_running
switched_to_fair() // Sets need_resched
__balance_callbacks() // if pull_rt_task(), tell_cpu_to_push() can't select local CPU per the above
raw_spin_rq_unlock(rq)
// need_resched is set, so task_woken_rt() can't
// invoke push_rt_tasks(). Best I can come up with is
// local CPU has rt_nr_migratory >= 2 after the demotion, so stays
// in the rto_mask, and then:
<some other CPU running rto_push_irq_work_func() queues rto_push_work on this CPU>
push_rt_task()
// breakage follows here as rq->curr is CFS
Move an existing check to check rq->curr vs the next pushable task's
priority before getting anywhere near find_lowest_rq(). While at it, add an
explicit sched_class of rq->curr check prior to invoking
find_lowest_rq(rq->curr). Align the DL logic to also reschedule regardless
of next_task's migratability.
Fixes: a7c81556ec4d ("sched: Fix migrate_disable() vs rt/dl balancing") Reported-by: John Keeping <john@metanate.com> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20220127154059.974729-1-valentin.schneider@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 1e0e63ad6243f378e8476b42412f83c1be6ebbed) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The cpuacct_account_field() is always called by the current task
itself, so it's ok to use __this_cpu_add() to charge the tick time.
But cpuacct_charge() maybe called by update_curr() in load_balance()
on a random CPU, different from the CPU on which the task is running.
So __this_cpu_add() will charge that cputime to a random incorrect CPU.
Fixes: 73e6aafd9ea8 ("sched/cpuacct: Simplify the cpuacct code") Reported-by: Minye Zhu <zhuminye@bytedance.com> Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20220220051426.5274-1-zhouchengming@bytedance.com Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit b7aec0843e2883b4bd5bed46f70b0febb046f9cc) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The nfsd file cache table can be pretty large and its allocation
may require as many as 80 contigious pages.
Employ the same fix that was employed for similar issue that was
reported for the reply cache hash table allocation several years ago
by commit 8f97514b423a ("nfsd: more robust allocation failure handling
in nfsd_reply_cache_init").
Fixes: 65294c1f2c5e ("nfsd: add a new struct file caching facility to nfsd") Link: https://lore.kernel.org/linux-nfs/e3cdaeec85a6cfec980e87fc294327c0381c1778.camel@kernel.org/ Suggested-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit cc91880f041705062aab4cc1d4e1271f4ecabd08) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Fixes: 7735730d39d7 ("f2fs: fix to propagate error from __get_meta_page()") Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit d1eaaf6cadedf638e17017b0a04d56308405ac10) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
There are inconsistencies when determining if a NUMA imbalance is allowed
that should be corrected.
o allow_numa_imbalance changes types and is not always examining
the destination group so both the type should be corrected as
well as the naming.
o find_idlest_group uses the sched_domain's weight instead of the
group weight which is different to find_busiest_group
o find_busiest_group uses the source group instead of the destination
which is different to task_numa_find_cpu
o Both find_idlest_group and find_busiest_group should account
for the number of running tasks if a move was allowed to be
consistent with task_numa_find_cpu
Fixes: 7d2b5dd0bcc4 ("sched/numa: Allow a floating imbalance between NUMA nodes") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Link: https://lore.kernel.org/r/20220208094334.16379-2-mgorman@techsingularity.net Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit ec5884cbbfd34ef7e4f380e5a56d32f73e7e762e) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Change from shifting 'unsigned long' to 'u64' to prevent the config bits
being lost on a 32-bit kernel.
Fixes: eadf48cab4b6b0 ("perf/x86/intel/pt: Add support for address range filtering in PT") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220131072453.2839535-5-adrian.hunter@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit df5e0a0b3a4eefe4845c21e5ea586d0c73057959) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The rseq rseq_cs.ptr.{ptr32,padding} uapi endianness handling is
entirely wrong on 32-bit little endian: a preprocessor logic mistake
wrongly uses the big endian field layout on 32-bit little endian
architectures.
Fortunately, those ptr32 accessors were never used within the kernel,
and only meant as a convenience for user-space.
Remove those and replace the whole rseq_cs union by a __u64 type, as
this is the only thing really needed to express the ABI. Document how
32-bit architectures are meant to interact with this field.
iowait_boost signal is applied independently of util and doesn't take
into account uclamp settings of the rq. An io heavy task that is capped
by uclamp_max could still request higher frequency because
sugov_iowait_apply() doesn't clamp the boost via uclamp_rq_util_with()
like effective_cpu_util() does.
Make sure that iowait_boost honours uclamp requests by calling
uclamp_rq_util_with() when applying the boost.
Fixes: 982d9cdc22c9 ("sched/cpufreq, sched/uclamp: Add clamps for FAIR and RT tasks") Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20211216225320.2957053-3-qais.yousef@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit d2c741290f7e2f48709b7f67c862b3f708998824) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The older format of /proc/pid/sched printed home node info which
required the mempolicy and task lock around mpol_get(). However
the format has changed since then and there is no need for
sched_show_numa() any more to have mempolicy argument,
asssociated mpol_get/put and task_lock/unlock. Remove them.
Fixes: 397f2378f1361 ("sched/numa: Fix numa balancing stats in /proc/pid/sched") Signed-off-by: Bharata B Rao <bharata@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@suse.de> Link: https://lore.kernel.org/r/20220118050515.2973-1-bharata@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 8bc68c44d97f28978aaa0012c395dc6f08dc02c3) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
It needs to assign sbi->gc_mode with GC_IDLE_AT rather than GC_AT when
user tries to enable ATGC via gc_idle sysfs interface, fix it.
Fixes: 093749e296e2 ("f2fs: support age threshold based garbage collection") Cc: Zhipeng Tan <tanzhipeng@hust.edu.cn> Signed-off-by: Jicheng Shao <shaojicheng@hust.edu.cn> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit d8c8dd97bb8cd5d1ab2857850e6166e51417435e) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
free_watch() does everything barring actually freeing the watch object. Fix
this by adding the missing kfree.
kmemleak produces a report something like the following. Note that as an
address can be seen in the first word, the watch would appear to have gone
through call_rcu().
In watch_queue_set_size(), the error cleanup code doesn't take account of
the fact that __free_page() can't handle a NULL pointer when trying to free
up buffer pages that did get allocated.
Fix this by only calling __free_page() on the pages actually allocated.
Without the fix, this can lead to something like the following:
Fixes: c73be61cede5 ("pipe: Add general notification queue support") Reported-and-tested-by: syzbot+d55757faa9b80590767b@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 695c47cea02b9101e2fc2e7d36d552128592b347) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The fix for not advancing the iterator if we're using fixed buffers is
broken in that it can hit a condition where we don't terminate the loop.
This results in io-wq looping forever, asking to read (or write) 0 bytes
for every subsequent loop.
Reported-by: Joel Jaeschke <joel.jaeschke@gmail.com> Link: https://github.com/axboe/liburing/issues/549 Fixes: 16c8d2df7ec0 ("io_uring: ensure symmetry in handling iter types in loop_rw_iter()") Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 109dda45102112799e507a65e375ebb096d3ae49) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Looks like a victim of too much copy/paste, we should not be looking
at req->open.how in accept. The point is to check CLOEXEC and error
out, which we don't invalid direct descriptors on exec. Hence any
attempt to get a direct descriptor with CLOEXEC is invalid.
No harm is done here, as req->open.how.flags overlaps with
req->accept.flags, but it's very confusing and might change if either of
those command structs are modified.
Fixes: aaa4db12ef7b ("io_uring: accept directly into fixed file table") Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 1323976e9448ace3af334235e4e0c1858119e782) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.
The __setup() handler interface isn't meant to handle negative return
values -- they are non-zero, so they mean "handled" (like a return
value of 1 does), but that's just a quirk. So return 1 from
parse_pmtmr(). Also print a warning message if kstrtouint() returns
an error.
Fixes: 6b148507d3d0 ("pmtmr: allow command line override of ioport") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 657edec8987a1d2ce5adf52f9c73ed9e196f0b01) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If there is an input undervoltage fault, reported in STATUS_INPUT
command response, there is quite likely a "Unit Off For Insufficient
Input Voltage" condition as well.
Add a constant for bit 3 of STATUS_INPUT. Update the Vin limit
attributes to include both bits in the mask for clearing faults.
If an input undervoltage fault occurs, causing a unit off for
insufficient input voltage, but the unit is off bit is not cleared, the
STATUS_WORD will not be updated to clear the input fault condition.
Including the unit is off bit (bit 3) allows for the input fault
condition to completely clear.
Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20220317232123.2103592-1-bjwyman@gmail.com Fixes: b4ce237b7f7d3 ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers")
[groeck: Dropped unnecessary ()] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 9b181ad309c60c24f5dbc13133a4c2248125db96) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
kfree_sensitive(ctx_p->user.key) will free the ctx_p->user.key. But
ctx_p->user.key is still used in the next line, which will lead to a
use after free.
We can call kfree_sensitive() after dev_dbg() to avoid the uaf.
Fixes: 63ee04c8b491 ("crypto: ccree - add skcipher support") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 335bf1fc74f775a8255257aa3e33763f2257b676) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
ccp_dmaengine_register adds dma_chan->device_node to dma_dev->channels list
but ccp_dmaengine_unregister didn't remove them.
That can cause crashes in various dmaengine methods that tries to use dma_dev->channels
Fixes: 58ea8abf4904 ("crypto: ccp - Register the CCP as a DMA...") Signed-off-by: Dāvis Mosāns <davispuh@gmail.com> Acked-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 20550eb187e83453c68a3de80844f94955355309) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
__setup() handlers should return 1 to indicate that the boot option
has been handled. Returning 0 causes a boot option to be listed in
the Unknown kernel command line parameters and also added to init's
arg list (if no '=' sign) or environment list (if of the form 'a=b').
Unknown kernel command line parameters "erst_disable
bert_disable hest_disable BOOT_IMAGE=/boot/bzImage-517rc6", will be
passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
erst_disable
bert_disable
hest_disable
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc6
Fixes: a3e2acc5e37b ("ACPI / APEI: Add Boot Error Record Table (BERT) support") Fixes: a08f82d08053 ("ACPI, APEI, Error Record Serialization Table (ERST) support") Fixes: 9dc966641677 ("ACPI, APEI, HEST table parsing") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 166b2478152c217213d532c08ce27d2d9dc82e61) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Before this commit the kernel could end up with no trusted key sources
even though both of the currently supported backends (TPM and TEE) were
compiled as modules. This manifested in the trusted key type not being
registered at all.
When checking if a CONFIG_… preprocessor variable is defined we only
test for the builtin (=y) case and not the module (=m) case. By using
the IS_REACHABLE() macro we do test for both cases.
Fixes: 5d0682be3189 ("KEYS: trusted: Add generic trusted keys framework") Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Andreas Rammhold <andreas@rammhold.de> Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit b0efbe7e88c7edd73a7daf83803c3bb1a592ea8c) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
We may call arm64_apply_bp_hardening() early during entry (e.g. in
el0_ia()) before it is safe to run instrumented code. Unfortunately this
may result in running instrumented code in two cases:
* The hardening callbacks called by arm64_apply_bp_hardening() are not
marked as `noinstr`, and have been observed to be instrumented when
compiled with either GCC or LLVM.
* Since arm64_apply_bp_hardening() itself is only marked as `inline`
rather than `__always_inline`, it is possible that the compiler
decides to place it out-of-line, whereupon it may be instrumented.
For example, with defconfig built with clang 13.0.0,
call_hvc_arch_workaround_1() is compiled as:
... with a patchable function entry registered with ftrace, and a direct
call to __sanitizer_cov_trace_pc(). Neither of these are safe early
during entry sequences.
This patch avoids the unsafe instrumentation by marking
arm64_apply_bp_hardening() as `__always_inline` and by marking the
hardening functions as `noinstr`. This avoids the potential for
instrumentation, and causes clang to consistently generate the function
as with the defconfig sample.
Note: in the defconfig compilation, when CONFIG_SVE=y, x30 is spilled to
the stack without being placed in a frame record, which will result in a
missing entry if call_hvc_arch_workaround_1() is backtraced. Similar is
true of qcom_link_stack_sanitisation(), where inline asm spills the LR
to a GPR prior to corrupting it. This is not a significant issue
presently as we will only backtrace here if an exception is taken, and
in such cases we may omit entries for other reasons today.
The relevant hardening functions were introduced in commits:
ec82b567a74fbdff ("arm64: Implement branch predictor hardening for Falkor") b092201e00206141 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support")
Use notrace for mchp_pit64b_sched_read_clk() to avoid recursive call of
prepare_ftrace_return() when issuing:
echo function_graph > /sys/kernel/debug/tracing/current_tracer
The driver statically defines maximum number of interrupts it can
handle, however it does not respect that limit when configuring them.
When provided with a DTS with more interrupts than assumed, the driver
will overwrite static array mct_irqs leading to silent memory
corruption.
Validate the interrupts coming from DTS to avoid this. This does not
change the fact that such DTS might not boot at all, because it is
simply incompatible, however at least some warning will be printed.
Fixes: 36ba5d527e95 ("ARM: EXYNOS: add device tree support for MCT controller driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220220103815.135380-1-krzysztof.kozlowski@canonical.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit a81de4315ecf5a401212154dad0168a0cb9ed857) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Move interrupts allocation from exynos4_timer_resources() into separate
function together with the interrupt number parsing code from
mct_init_dt(), so the code for managing interrupts is kept together.
While touching exynos4_timer_resources() function, move of_iomap() to it.
No functional changes.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20211101193531.15078-2-semen.protsenko@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit e34ba9ff04eeecd4b2f406973288ea50fbbb129b) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
vmx-crypto module depends on CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or
CRYPTO_XTS, thus add them.
These dependencies are likely to be enabled, but if
CRYPTO_DEV_VMX=y && !CRYPTO_MANAGER_DISABLE_TESTS
and either of CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or CRYPTO_XTS is built
as module or disabled, alg_test() from crypto/testmgr.c complains during
boot about failing to allocate the generic fallback implementations
(2 == ENOENT):
[ 0.540953] Failed to allocate xts(aes) fallback: -2
[ 0.541014] alg: skcipher: failed to allocate transform for p8_aes_xts: -2
[ 0.541120] alg: self-tests for p8_aes_xts (xts(aes)) failed (rc=-2)
[ 0.544440] Failed to allocate ctr(aes) fallback: -2
[ 0.544497] alg: skcipher: failed to allocate transform for p8_aes_ctr: -2
[ 0.544603] alg: self-tests for p8_aes_ctr (ctr(aes)) failed (rc=-2)
[ 0.547992] Failed to allocate cbc(aes) fallback: -2
[ 0.548052] alg: skcipher: failed to allocate transform for p8_aes_cbc: -2
[ 0.548156] alg: self-tests for p8_aes_cbc (cbc(aes)) failed (rc=-2)
[ 0.550745] Failed to allocate transformation for 'aes': -2
[ 0.550801] alg: cipher: Failed to load transform for p8_aes: -2
[ 0.550892] alg: self-tests for p8_aes (aes) failed (rc=-2)
Fixes: c07f5d3da643 ("crypto: vmx - Adding support for XTS") Fixes: d2e3ae6f3aba ("crypto: vmx - Enabling VMX module for PPC64") Suggested-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 58c9d407ce829c9be6368ab9296623d7d3cade1a) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If an invalid option is given for "test_suspend=<option>", the entire
string is added to init's environment, so return 1 instead of 0 from
the __setup handler.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5
test_suspend=invalid"
and
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
test_suspend=invalid
Fixes: 2ce986892faf ("PM / sleep: Enhance test_suspend option with repeat capability") Fixes: 27ddcc6596e5 ("PM / sleep: Add state field to pm_states[] entries") Fixes: a9d7052363a6 ("PM: Separate suspend to RAM functionality from core") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 7e45fc93dde2d79122c8fa68471ae945ba793e2e) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If an invalid value is used in "resumedelay=<seconds>", it is
silently ignored. Add a warning message and then let the __setup
handler return 1 to indicate that the kernel command line option
has been handled.
Fixes: 317cf7e5e85e3 ("PM / hibernate: convert simple_strtoul to kstrtoul") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit d0cd9da501f65545c02cb7a220061e52c9e4b222) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
kobjects aren't supposed to be deleted before their child kobjects are
deleted. Apparently this is usually benign; however, a WARN will be
triggered if one of the child kobjects has a named attribute group:
sysfs group 'modes' not found for kobject 'crypto'
WARNING: CPU: 0 PID: 1 at fs/sysfs/group.c:278 sysfs_remove_group+0x72/0x80
...
Call Trace:
sysfs_remove_groups+0x29/0x40 fs/sysfs/group.c:312
__kobject_del+0x20/0x80 lib/kobject.c:611
kobject_cleanup+0xa4/0x140 lib/kobject.c:696
kobject_release lib/kobject.c:736 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x53/0x70 lib/kobject.c:753
blk_crypto_sysfs_unregister+0x10/0x20 block/blk-crypto-sysfs.c:159
blk_unregister_queue+0xb0/0x110 block/blk-sysfs.c:962
del_gendisk+0x117/0x250 block/genhd.c:610
Fix this by moving the kobject_del() and the corresponding
kobject_uevent() to the correct place.
Fixes: 2c2086afc2b8 ("block: Protect less code with sysfs_lock in blk_{un,}register_queue()") Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220124215938.2769-3-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit efaa0e969261e97c1fdd8e0338e5dd3ba5b9219c) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
nvme_subsys_check_duplicate_ids should needs to return an error if any of
the identifiers matches, not just if all of them match. But it does not
need to and should not look at the CSI value for this sanity check.
Rewrite the logic to be separate from nvme_ns_ids_equal and optimize it
by reducing duplicate checks for non-present identifiers.
Fixes: ed754e5deeb1 ("nvme: track shared namespaces") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit b9070c866aa3bd4daaab24293498e4e2331c3e90) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Pass the actual nvme_ns_ids used for the comparison instead of the
ns_head that isn't needed and use a more descriptive function name.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 2340a15d39144f63cff0c96393d7ccc642efd41f) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If the watchdog was already enabled by the BIOS after booting, the
watchdog infrastructure needs to regularly send keepalives to
prevent a unexpected reset.
WDOG_ACTIVE only serves as an status indicator for userspace,
we want to use WDOG_HW_RUNNING instead.
Since my Fujitsu Esprimo P720 does not support the watchdog,
this change is compile-tested only.
Suggested-by: Guenter Roeck <linux@roeck-us.net> Fixes: fb551405c0f8 (watchdog: sch56xx: Use watchdog core) Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220131211935.3656-5-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit a015dd1b8a5465dfedf6425c93ab7b4137cd6636) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
On PMBUS devices with multiple pages, the regulator ops need to be
protected with the update mutex. This prevents accidentally changing
the page in a separate thread while operating on the PMBUS_OPERATION
register.
Tested on Infineon xdpe11280 while a separate thread polls for sensor
data.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/b991506bcbf665f7af185945f70bf9d5cf04637c.1645804976.git.sylv@sylv.io Fixes: ddbb4db4ced1b ("hwmon: (pmbus) Add regulator support") Cc: Alan Tull <atull@opensource.altera.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 3a70165fc7883237f17a23e6157a0df99996fb6b) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The pci_get_slot() increases its reference count, the caller
must decrement the reference count by calling pci_dev_put().
Fixes: 743485ea3bee ("spi: pxa2xx-pci: Do a specific setup in a separate function") Fixes: 25014521603f ("spi: pxa2xx-pci: Enable DMA for Intel Merrifield") Reported-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220223191637.31147-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit f2757af27bf33d22da96dbc94d3c5d729c7ffac8) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Due to the subreq pointer misuse the private context memory. The aead
soft crypto occasionally casues the OS panic as setting the 64K page.
Here is fix it.
Fixes: 6c46a3297bea ("crypto: hisilicon/sec - add fallback tfm...") Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 40dba7c26e897c637e91312b35f664f1d4d0073c) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Refuse to try mapping zero bytes as this may cause a fault
on some configurations / platforms and it seems the prev.
attempt is not enough and we need to be more explicit.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Fixes: ce0fc6db38de ("crypto: ccree - protect against empty or NULL
scatterlists") Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit c71e4d45dcc479a9f522b958d3c759d99bd9faee) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
__setup() handlers should return 1 if the parameter is handled.
Returning 0 causes the entire string to be added to init's
environment strings (limited to 32 strings), unnecessarily polluting it.
Using the documented string "evm=fix" causes an Unknown parameter message:
Unknown kernel command line parameters
"BOOT_IMAGE=/boot/bzImage-517rc5 evm=fix", will be passed to user space.
and that string is added to init's environment string space:
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
evm=fix
With this change, using "evm=fix" acts as expected and an invalid
option ("evm=evm") causes a warning to be printed:
evm: invalid "evm" mode
but init's environment is not polluted with this string, as expected.
Fixes: 7102ebcd65c1 ("evm: permit only valid security.evm xattrs to be updated") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 0c366ade8606ba2483493104627fc445d985bc81) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
AUDIT_TIME_* events are generated when there are syscall rules present
that are not related to time keeping. This will produce noisy log
entries that could flood the logs and hide events we really care about.
Rather than immediately produce the AUDIT_TIME_* records, store the data
in the context and log it at syscall exit time respecting the filter
rules.
Note: This eats the audit_buffer, unlike any others in show_special().
Please see https://bugzilla.redhat.com/show_bug.cgi?id=1991919
Fixes: 7e8eda734d30 ("ntp: Audit NTP parameters adjustment") Fixes: 2d87a0674bd6 ("timekeeping: Audit clock adjustments") Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: fixed style/whitespace issues] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 3a10df7315163d60bbe24356ef9049acdb162d61) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When loading rockchip crypto module, testmgr complains that ivsize of ecb-des3-ede-rk
is not the same than generic implementation.
In fact ECB does not use an IV.
Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 8e8724b87afecb256037bedddcc6b267c21749c2) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
CC can have multiple sub-strings like "ccache gcc". For check_cc.sh,
CC needs to be treated like one argument. Put double quotes around it to
make CC one string and hence one argument.
Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX") Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lkml.kernel.org/r/20220214184109.3739179-3-usama.anjum@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 4d6e00474872a57176ac5f38422d2b15c22073df) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Add check to test if CC has a string. CC can have multiple sub-strings
like "ccache gcc". Erorr pops up if it is treated as single string and
double quotes are used around it. This can be fixed by removing the
quotes and not treating CC as a single string.
Fixes: e9886ace222e ("selftests, x86: Rework x86 target architecture detection") Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lkml.kernel.org/r/20220214184109.3739179-2-usama.anjum@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit d9172393f0f60a57ccadc037b0a68a573d6518b0) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The 'fixmap' is a global resource and is used recursively by
create pud mapping(), leading to a potential race condition in the
presence of a concurrent call to alloc_init_pud():
As kernel may sleep during creating pud mapping, introduce a mutex lock to
serialise use of the fixmap entries by alloc_init_pud(). However, there is
no need for locking in early boot stage and it doesn't work well with
KASLR enabled when early boot. So, enable lock when system_state doesn't
equal to "SYSTEM_BOOTING".
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: f4710445458c ("arm64: mm: use fixmap when creating page tables") Link: https://lore.kernel.org/r/20220201114400.56885-1-jianyong.wu@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit c17eb1586c94d7a2bf72220566146232aaf16be0) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
All supported versions of Clang perform auto-init of __builtin_alloca()
when stack auto-init is on (CONFIG_INIT_STACK_ALL_{ZERO,PATTERN}).
add_random_kstack_offset() uses __builtin_alloca() to add a stack
offset. This means, when CONFIG_INIT_STACK_ALL_{ZERO,PATTERN} is
enabled, add_random_kstack_offset() will auto-init that unused portion
of the stack used to add an offset.
There are several problems with this:
1. These offsets can be as large as 1023 bytes. Performing
memset() on them isn't exactly cheap, and this is done on
every syscall entry.
2. Architectures adding add_random_kstack_offset() to syscall
entry implemented in C require them to be 'noinstr' (e.g. see
x86 and s390). The potential problem here is that a call to
memset may occur, which is not noinstr.
A x86_64 defconfig kernel with Clang 11 and CONFIG_VMLINUX_VALIDATION shows:
Clang 14 (unreleased) will introduce a way to skip alloca initialization
via __builtin_alloca_uninitialized() (https://reviews.llvm.org/D115440).
Constrain RANDOMIZE_KSTACK_OFFSET to only be enabled if no stack
auto-init is enabled, the compiler is GCC, or Clang is version 14+. Use
__builtin_alloca_uninitialized() if the compiler provides it, as is done
by Clang 14.
This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_threaded_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Stop calling request_threaded_irq() with invalid IRQ #s.
This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_threaded_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Stop calling request_threaded_irq() with invalid IRQ #s.
selinux_sb_mnt_opts_compat() is called under the sb_lock spinlock and
shouldn't be performing any memory allocations. Fix this by parsing the
sids at the same time we're chopping up the security mount options
string and then using the pre-parsed sids when doing the comparison.
Fixes: cc274ae7763d ("selinux: fix sleeping function called from invalid context") Fixes: 69c4a42d72eb ("lsm,selinux: add new hook to compare new mount to an existing mount") Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 486d4c18f207eef95459f3258238eab418c3c4e9) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
This patch fixes a bug in scatterlist processing that may cause incorrect AES block encryption/decryption.
Fixes: 2e6d793e1bf0 ("crypto: mxs-dcp - Use sg_mapping_iter to copy data") Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit c111b3c1a257022dcf36822ce6d0a2492f52cf1b) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The function crypto_authenc_decrypt_tail discards its flags
argument and always relies on the flags from the original request
when starting its sub-request.
This is clearly wrong as it may cause the SLEEPABLE flag to be
set when it shouldn't.
Fixes: 92d95ba91772 ("crypto: authenc - Convert to new AEAD interface") Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit af3c34eb94104035c5f65d046126aa79199acece) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When adding hashes support to sun8i-ss, I have added them only on A83T.
But I forgot that 0 is a valid algorithm ID, so hashes are enabled on A80 but
with an incorrect ID.
Anyway, even with correct IDs, hashes do not work on A80 and I cannot
find why.
So let's disable all of them on A80.
Fixes: d9b45418a917 ("crypto: sun8i-ss - support hash algorithms") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 8f10a38c9212d8ff3ca7b240a3ea9f9f371b078f) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The Cavium ThunderX Random Number Generator is only present on Cavium
ThunderX SoCs, and not available as an independent PCIe endpoint. Hence
add a dependency on ARCH_THUNDER, to prevent asking the user about this
driver when configuring a kernel without Cavium Thunder SoC support.
Fixes: cc2f1908c6b8f625 ("hwrng: cavium - Add Cavium HWRNG driver for ThunderX SoC.") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 046f1499aef86caa614c12c736895b64c6a6c306) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
This RNG device is present on Marvell OcteonTx2 silicons as well and
also provides entropy health status.
HW continuously checks health condition of entropy and reports
faults. Fault is in terms of co-processor cycles since last fault
detected. This doesn't get cleared and only updated when new fault
is detected. Also there are chances of detecting false positives.
So to detect a entropy failure SW has to check if failures are
persistent ie cycles elapsed is frequently updated by HW.
This patch adds support to detect health failures using below algo.
1. Consider any fault detected before 10ms as a false positive and ignore.
10ms is chosen randomly, no significance.
2. Upon first failure detection make a note of cycles elapsed and when this
error happened in realtime (cntvct).
3. Upon subsequent failure, check if this is new or a old one by comparing
current cycles with the ones since last failure. cycles or time since
last failure is calculated using cycles and time info captured at (2).
HEALTH_CHECK status register is not available to VF, hence had to map
PF registers. Also since cycles are in terms of co-processor cycles,
had to retrieve co-processor clock rate from RST device.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 7919dfd84b352782df92c1ff2f0ca4dd5328d198) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Initialize psp_ret inside of __sev_platform_init_locked() because there
are many failure paths with PSP initialization that do not set
__sev_do_cmd_locked().
Fixes: e423b9d75e77: ("crypto: ccp - Move SEV_INIT retry for corrupted data") Signed-off-by: Peter Gonda <pgonda@google.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Marc Orr <marcorr@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: John Allen <john.allen@amd.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 0e67b3e1f93a6d368ab0cebce5b3ef5e6af785a1) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
sel_make_avc_files() might fail and return a negative errno value on
memory allocation failures. Re-add the check of the return value,
dropped in 66f8e2f03c02 ("selinux: sidtab reverse lookup hash table").
Reported by clang-analyzer:
security/selinux/selinuxfs.c:2129:2: warning: Value stored to
'ret' is never read [deadcode.DeadStores]
ret = sel_make_avc_files(dentry);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 66f8e2f03c02 ("selinux: sidtab reverse lookup hash table") Signed-off-by: Christian Göttsche <cgzones@googlemail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
[PM: description line wrapping, added proper commit ref] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 01d50841705568f346ad465455d0c3e4c6fade50) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
LSM blob has been involved for superblock's security struct. So fix the
remaining direct access to sb->s_security by using the LSM blob
mechanism.
Fixes: 08abe46b2cfc ("selinux: fall back to SECURITY_FS_USE_GENFS if no xattr support") Fixes: 69c4a42d72eb ("lsm,selinux: add new hook to compare new mount to an existing mount") Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com> Reviewed-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit aeeb944e7f91e9640391848c8a5ed48ec0db2367) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
drivers/regulator/qcom_smd-regulator.c:1318:1-33: WARNING: Function "for_each_available_child_of_node" should have of_node_put() before return around line 1321.
Semantic patch information:
False positives can be due to function calls within the for_each
loop that may encapsulate an of_node_put.
Fixes: 14e2976fbabd ("regulator: qcom_smd: Align probe function with rpmh-regulator") CC: Konrad Dybcio <konrad.dybcio@somainline.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2201151210170.3051@hadrien Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit ae2ff8d991b6479d1aa6496db40948b6806c7f0f) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Commit c7a75d07827a ("PCI: xgene: Fix IB window setup") tried to
fix the damages that 6dce5aa59e0b ("PCI: xgene: Use inbound resources
for setup") caused, but actually didn't improve anything for some
plarforms (at least Mustang and m400 are still broken).
Given that 6dce5aa59e0b has been reverted, revert this patch as well,
restoring the PCIe support on XGene to its pre-5.5, working state.
Link: https://lore.kernel.org/r/YjN8pT5e6/8cRohQ@xps13.dannf Link: https://lore.kernel.org/r/20220321104843.949645-3-maz@kernel.org Fixes: c7a75d07827a ("PCI: xgene: Fix IB window setup") Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Cc: Rob Herring <robh@kernel.org> Cc: Toan Le <toan@os.amperecomputing.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Krzysztof Wilczyński <kw@linux.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Stéphane Graber <stgraber@ubuntu.com> Cc: dann frazier <dann.frazier@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 9bbe88d1023f476a0be15f2366ad990b7f708d53) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Writes to a Downstream Port's Slot Control register are PCIe hotplug
"commands." If the Port supports Command Completed events, software must
wait for a command to complete before writing to Slot Control again.
pcie_do_write_cmd() sets ctrl->cmd_busy when it writes to Slot Control. If
software notification is enabled, i.e., PCI_EXP_SLTCTL_HPIE and
PCI_EXP_SLTCTL_CCIE are set, ctrl->cmd_busy is cleared by pciehp_isr().
But when software notification is disabled, as it is when pcie_init()
powers off an empty slot, pcie_wait_cmd() uses pcie_poll_cmd() to poll for
command completion, and it neglects to clear ctrl->cmd_busy, which leads to
spurious timeouts:
The intention of commit 886a9c134755 ("PCI: dwc: Move link handling into
common code") was to standardize the behavior of link down as explained
in its commit log:
"The behavior for a link down was inconsistent as some drivers would fail
probe in that case while others succeed. Let's standardize this to
succeed as there are usecases where devices (and the link) appear later
even without hotplug. For example, a reconfigured FPGA device."
The pci-imx6 still fails to probe when the link is not present, which
causes the following warning:
imx6q-pcie 8ffc000.pcie: Phy link never came up
imx6q-pcie: probe of 8ffc000.pcie failed with error -110
------------[ cut here ]------------
WARNING: CPU: 0 PID: 30 at drivers/regulator/core.c:2257 _regulator_put.part.0+0x1b8/0x1dc
Modules linked in:
CPU: 0 PID: 30 Comm: kworker/u2:2 Not tainted 5.15.0-next-20211103 #1
Hardware name: Freescale i.MX6 SoloX (Device Tree)
Workqueue: events_unbound async_run_entry_fn
[<c0111730>] (unwind_backtrace) from [<c010bb74>] (show_stack+0x10/0x14)
[<c010bb74>] (show_stack) from [<c0f90290>] (dump_stack_lvl+0x58/0x70)
[<c0f90290>] (dump_stack_lvl) from [<c012631c>] (__warn+0xd4/0x154)
[<c012631c>] (__warn) from [<c0f87b00>] (warn_slowpath_fmt+0x74/0xa8)
[<c0f87b00>] (warn_slowpath_fmt) from [<c076b4bc>] (_regulator_put.part.0+0x1b8/0x1dc)
[<c076b4bc>] (_regulator_put.part.0) from [<c076b574>] (regulator_put+0x2c/0x3c)
[<c076b574>] (regulator_put) from [<c08c3740>] (release_nodes+0x50/0x178)
Fix this problem by ignoring the dw_pcie_wait_for_link() error like
it is done on the other dwc drivers.
Tested on imx6sx-sdb and imx6q-sabresd boards.
Link: https://lore.kernel.org/r/20220106103645.2790803-1-festevam@gmail.com Fixes: 886a9c134755 ("PCI: dwc: Move link handling into common code") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 86ca875918709380da5e72950f332ba843bcaec0) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
A missing bounds check in vm_access() can lead to an out-of-bounds read
or write in the adjacent memory area, since the len attribute is not
validated before the memcpy later in the function, potentially hitting:
Changes since v1:
- Updated if condition with range_overflows_t [Chris Wilson]
Fixes: 9f909e215fea ("drm/i915: Implement vm_ops->access for gdb access into mmaps") Signed-off-by: Mastan Katragadda <mastanx.katragadda@intel.com> Suggested-by: Adam Zabrocki <adamza@microsoft.com> Reported-by: Jackson Cody <cody.jackson@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Sudeep Dutt <sudeep.dutt@intel.com> Cc: <stable@vger.kernel.org> # v5.8+ Reviewed-by: Matthew Auld <matthew.auld@intel.com>
[mauld: tidy up the commit message and add Cc: stable] Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220303060428.1668844-1-mastanx.katragadda@intel.com
(cherry picked from commit 661412e301e2ca86799aa4f400d1cf0bd38c57c6) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 312d3d4f49e12f97260bcf972c848c3562126a18) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The mapping from enum port to whatever port numbering scheme is used by
the SWSCI Display Power State Notification is odd, and the memory of it
has faded. In any case, the parameter only has space for ports numbered
[0..4], and UBSAN reports bit shift beyond it when the platform has port
F or more.
Since the SWSCI functionality is supposed to be obsolete for new
platforms (i.e. ones that might have port F or more), just bail out
early if the mapped and mangled port number is beyond what the Display
Power State Notification can support.
Fixes: 9c4b0a683193 ("drm/i915: add opregion function to notify bios of encoder enable/disable") Cc: <stable@vger.kernel.org> # v3.13+ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4800 Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/cc363f42d6b5a5932b6d218fefcc8bdfb15dbbe5.1644489329.git.jani.nikula@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit d8b8bd1d03ee7db8e7cb79748a70c2eef4dd706f) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The driver was enabling IRQs before the message processing was
initialized. This could cause IRQs to come in too early and crash the
driver. Instead, move the IRQ enable and hostready to a bus preinit
function, at which point everything is properly initialized.
Fixes: 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-7-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 2b08e0189b027d5d54f2b9bc8224391ca624e0cb) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The alignment check was wrong (e.g. & 4 instead of & 3), and the logic
was also inefficient if the length was not a multiple of 4, since it
would needlessly fall back to copying the entire buffer bytewise.
We already have a perfectly good memcpy_toio function, so just call that
instead of rolling our own copy logic here. brcmf_pcie_init_ringbuffers
was already using it anyway.
Fixes: 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-6-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit a7ea6de3bdd59c2769c7bafb110f88c567011bbc) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
This avoids leaking memory if brcmf_chip_get_raminfo fails. Note that
the CLM blob is released in the device remove path.
Fixes: 82f93cf46d60 ("brcmfmac: get chip's default RAM info during PCIe setup") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-2-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit a88337a06966f2d733ad9a97714b874469133f14) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If boardrev is missing from the NVRAM we add a default one, but this
might need more space in the output buffer than was allocated. Ensure
we have enough padding for this in the buffer.
Fixes: 46f2b38a91b0 ("brcmfmac: insert default boardrev in nvram data if missing") Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-3-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 6e2dfa8290266cd39d05833109ce547065f749e0) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Mark screen buffers in system memory with FBINFO_VIRTFB. Otherwise, fbdev
deferred I/O marks mmap'ed areas of system memory with VM_IO. (There's an
inverse relationship between the two flags.)
For shadow buffers, also set the FBINFO_READS_FAST hint.
v3:
* change FB_ to FBINFO_ in commit description
v2:
* updated commit description (Daniel)
* added Fixes tag
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: d536540f304c ("drm/fb-helper: Add generic fbdev emulation .fb_probe function") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.19+ Link: https://patchwork.freedesktop.org/patch/msgid/20220201115305.9333-1-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 51f0af904fb621721d2c95c1eb349fb46af63a04) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Currently we can get a warning on systems with eDP backlights like so:
nv_backlight: invalid backlight type
WARNING: CPU: 4 PID: 454 at drivers/video/backlight/backlight.c:420
backlight_device_register+0x226/0x250
This happens as a result of us not filling out props.type for the eDP
backlight, even though we do it for all other backlight types.
Since nothing in our driver uses anything but BACKLIGHT_RAW, let's take the
props\.type assignments out of the codepaths for individual backlight types
and just set it unconditionally to prevent this from happening again.
It seems that some laptops will report having both an eDP and LVDS
connector, even though only the LVDS connector is actually hooked up. This
can lead to issues with backlight registration if the eDP connector ends up
getting registered before the LVDS connector, as the backlight device will
then be registered to the eDP connector instead of the LVDS connector.
So, fix this by only registering the backlight on connectors that are
reported as being connected.
Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 6eca310e8924 ("drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau")
Bugzilla: https://gitlab.freedesktop.org/drm/nouveau/-/issues/137 Cc: <stable@vger.kernel.org> # v5.15+ Reviewed-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220204180504.328999-1-lyude@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 80de94c4ab4e0e0db2775cf6b0c7f9c54b4bf330) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The commit cad6fade6e78 ("xtensa: clean up WSR*/RSR*/get_sr/set_sr")
replaced 'WSR' macro in the function xtensa_wsr with 'xtensa_set_sr',
but variable 'v' in the xtensa_set_sr body shadowed the argument 'v'
passed to it, resulting in wrong value written to debug registers.
Fix that by removing intermediate variable from the xtensa_set_sr
macro body.
Cc: stable@vger.kernel.org Fixes: cad6fade6e78 ("xtensa: clean up WSR*/RSR*/get_sr/set_sr") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 85814e6461b825c61b8df7f07558b0025ade05ed) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
patch_text must invoke patch_text_stop_machine on all online CPUs, but
it calls stop_machine_cpuslocked with NULL cpumask. As a result only one
CPU runs patch_text_stop_machine potentially leaving stale icache
entries on other CPUs. Fix that by calling stop_machine_cpuslocked with
cpu_online_mask as the last argument.
Cc: stable@vger.kernel.org Fixes: 64711f9a47d4 ("xtensa: implement jump_label support") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 821907e8f516b01ea0c64f057b7d0a45ab242e17) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Before the commit f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault()
codepaths") there was a call to update_mmu_cache in alloc_set_pte that
used to invalidate TLB entry caching invalid PTE that caused a page
fault. That commit removed that call so now invalid TLB entry survives
causing repetitive page faults on the CPU that took the initial fault
until that TLB entry is occasionally evicted. This issue is spotted by
the xtensa TLB sanity checker.
Fix this issue by defining update_mmu_tlb function that flushes TLB entry
for the faulting address.
Cc: stable@vger.kernel.org # 5.12+ Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit e28bace5e7dca163451d93082ed5a57b8b52c017) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
[BUG]
There is a bug report that a bitflip in the transid part of an extent
buffer makes btrfs to reject certain tree blocks:
BTRFS error (device dm-0): parent transid verify failed on 1382301696 wanted 262166 found 22
[CAUSE]
Note the failed transid check, hex(262166) = 0x40016, while
hex(22) = 0x16.
It's an obvious bitflip.
Furthermore, the reporter also confirmed the bitflip is from the
hardware, so it's a real hardware caused bitflip, and such problem can
not be detected by the existing tree-checker framework.
As tree-checker can only verify the content inside one tree block, while
generation of a tree block can only be verified against its parent.
So such problem remain undetected.
[FIX]
Although tree-checker can not verify it at write-time, we still have a
quick (but not the most accurate) way to catch such obvious corruption.
Function csum_one_extent_buffer() is called before we submit metadata
write.
Thus it means, all the extent buffer passed in should be dirty tree
blocks, and should be newer than last committed transaction.
Using that we can catch the above bitflip.
Although it's not a perfect solution, as if the corrupted generation is
higher than the correct value, we have no way to catch it at all.
bytes_pinned is always accessed under space_info->lock, except in
btrfs_preempt_reclaim_metadata_space, however the other members are
accessed under that lock. The reserved member of the rsv's are also
partially accessed under a lock and partially not. Move all these
accesses into the same lock to ensure consistency.
This could potentially race and lead to a flush instead of a commit but
it's not a big problem as it's only for preemptive flush.
CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Niels Dossche <niels.dossche@ugent.be> Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit f85ee0c845fd42b63bc10dd3e37e68115ad3a710) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
There is a hung_task issue with running generic/068 on an SMR
device. The hang occurs while a process is trying to thaw the
filesystem. The process is trying to take sb->s_umount to thaw the
FS. The lock is held by fsstress, which calls btrfs_sync_fs() and is
waiting for an ordered extent to finish. However, as the FS is frozen,
the ordered extents never finish.
Having an ordered extent while the FS is frozen is the root cause of
the hang. The ordered extent is initiated from btrfs_relocate_chunk()
which is called from btrfs_reclaim_bgs_work().
This commit adds sb_*_write() around btrfs_relocate_chunk() call
site. For the usual "btrfs balance" command, we already call it with
mnt_want_file() in btrfs_ioctl_balance().
Fixes: 18bb8bbf13c1 ("btrfs: zoned: automatically reclaim zones") CC: stable@vger.kernel.org # 5.13+ Link: https://github.com/naota/linux/issues/56 Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 68a8120e1647b6c9cf82687d5f7c6a96ee3b8e97) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>