Anand Lodnoor [Tue, 14 Jan 2020 11:21:17 +0000 (16:51 +0530)]
scsi: megaraid_sas: Do not set HBA Operational if FW is not in operational state
After issuing a adapter reset, driver blindly used to set adprecovery flag
to OPERATIONAL state. Add a check to see if the FW is operational before
setting the flag and marking reset adapter successful.
Anand Lodnoor [Tue, 14 Jan 2020 11:21:16 +0000 (16:51 +0530)]
scsi: megaraid_sas: Do not kill HBA if JBOD Seqence map or RAID map is disabled
At the time of firmware initialization, if JBOD map or RAID map is not
available, driver can function without these features in a limited
functionality mode.
Anand Lodnoor [Tue, 14 Jan 2020 11:21:14 +0000 (16:51 +0530)]
scsi: megaraid_sas: Update optimal queue depth for SAS and NVMe devices
Ideally, optimal queue depth will be provided by firmware. The driver
defines will be used as a fallback mechanism in case the FW assisted QD is
not supported. The driver defined values provide optimal queue depth for
most of the drives and the workloads, as is learned from the firmware
assisted QD results.
Anand Lodnoor [Tue, 14 Jan 2020 11:21:12 +0000 (16:51 +0530)]
scsi: megaraid_sas: Reset adapter if FW is not in READY state after device resume
After device resume we expect the firmware to be in READY state.
Transition to READY might fail due to unhandled exceptions, such as an
internal error or a hardware failure. Retry initiating chip reset and wait
for the controller to come to ready state.
compat_ioctl: use correct compat_ptr() translation in drivers
A handful of drivers all have a trivial wrapper around their ioctl
handler, but don't call the compat_ptr() conversion function at the
moment. In practice this does not matter, since none of them are used
on the s390 architecture and for all other architectures, compat_ptr()
does not do anything, but using the new compat_ptr_ioctl()
helper makes it more correct in theory, and simplifies the code.
I checked that all ioctl handlers in these files are compatible
and take either pointer arguments or no argument.
Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
(cherry picked from commit 01b8bca81e181ccca475e1fdb92ebb00d9d9b547) Signed-off-by: Michael Reed <Michael.Reed@canonical.com> BugLink: https://bugs.launchpad.net/bugs/1863581
Update the Megaraid_sas driver to version 07.713.01.00-rc1 from 07.710.50.00-rc1
Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
drivers/scsi/megaraid/megaraid_sas_fp.c: In function MR_GetSpanBlock:
drivers/scsi/megaraid/megaraid_sas_fp.c:400:16: warning: variable debugBlk set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_sas_fp.c: In function mr_spanset_get_phy_params:
drivers/scsi/megaraid/megaraid_sas_fp.c:713:25: warning: variable fusion set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_sas_fp.c: In function MR_GetPhyParams:
drivers/scsi/megaraid/megaraid_sas_fp.c:815:25: warning: variable fusion set but not used [-Wunused-but-set-variable]
'debugBlk' is introduced by commit 9c915a8c99bc ("[SCSI] megaraid_sas:
Add 9565/9285 specific code"), but never used, so remove it
'fusion' is not used since commit c365178f3147 ("scsi: megaraid_sas:
use adapter_type for all gen controllers")
scsi: megaraid_sas: Unique names for MSI-X vectors
Currently, MSI-X vectors name appears in /proc/interrupts is "megasas"
which is same for all the vectors. This patch provides a unique name for
all megaraid_sas controllers and their associated MSI-X interrupts.
The verifier rewrote original instructions it recognized as dead code with
'goto pc-1', but reality differs from verifier simulation in that we're
actually able to trigger a hang due to hitting the 'goto pc-1' instructions.
Taking different examples to make the issue more obvious: in this example
we're probing bounds on a completely unknown scalar variable in r1:
We're first probing lower/upper bounds via jmp64, later we do a similar
check via jmp32 and examine the resulting var_off there. After fall-through
in insn 14, we get the following bounded r1 with 0x7fffffffff unknown marked
bits in the variable section.
Thus, after knowing r1 <= 0x4000000000 and r1 >= 0x2000000000:
The lower/upper bounds haven't changed since they have high bits set in
u64 space and the jmp32 tests can only refine bounds in the low bits.
However, for the var part the expectation would have been 0x7f000007ff
or something less precise up to 0x7fffffffff. A outcome of 0x7f00000000
is not correct since it would contradict the earlier probed bounds
where we know that the result should have been in [0x200,0x400] in u32
space. Therefore, tests with such info will lead to wrong verifier
assumptions later on like falsely predicting conditional jumps to be
always taken, etc.
The issue here is that __reg_bound_offset32()'s implementation from
commit 581738a681b6 ("bpf: Provide better register bounds after jmp32
instructions") makes an incorrect range assumption:
In the above walk-through example, __reg_bound_offset32() as-is chose
a range after masking with 0xffffffff of [0x0,0x0] since umin:0x2000000000
and umax:0x4000000000 and therefore the lo32 part was clamped to 0x0 as
well. However, in the umin:0x2000000000 and umax:0x4000000000 range above
we'd end up with an actual possible interval of [0x0,0xffffffff] for u32
space instead.
In case of the original reproducer, the situation looked as follows at
insn 5 for r0:
After the fall-through, we similarly forced the var_off result into
the wrong range [0x30303030,0x3030302f] suggesting later on that fixed
bits must only be of 0x30303020 with 0x10000001f unknowns whereas such
assumption can only be made when both bounds in hi32 range match.
Originally, I was thinking to fix this by moving reg into a temp reg and
use proper coerce_reg_to_size() helper on the temp reg where we can then
based on that define the range tnum for later intersection:
In the case of the concrete example, this gives us a more conservative unknown
section. Thus, after knowing r1 <= 0x4000000000 and r1 >= 0x2000000000 and
w1 <= 0x400 and w1 >= 0x200:
However, above new __reg_bound_offset32() has no effect on refining the
knowledge of the register contents. Meaning, if the bounds in hi32 range
mismatch we'll get the identity function given the range reg spans
[0x0,0xffffffff] and we cast var_off into lo32 only to later on binary
or it again with the hi32.
Likewise, if the bounds in hi32 range match, then we mask both bounds
with 0xffffffff, use the resulting umin/umax for the range to later
intersect the lo32 with it. However, _prior_ called __reg_bound_offset()
did already such intersection on the full reg and we therefore would only
repeat the same operation on the lo32 part twice.
Given this has no effect and the original commit had false assumptions,
this patch reverts the code entirely. The bounds refinement would need
a significantly more complex approach which is currently being worked on
via [0] (but far from stable material). After the revert, the original
reported program gets correctly rejected as follows:
Seth Forshee [Mon, 23 Mar 2020 18:41:00 +0000 (13:41 -0500)]
UBUNTU: SAUCE: (lockdown) Reduce lockdown level to INTEGRITY for secure boot
Setting this to CONFIDENTIALITY under secure boot restricts many
useful features. Reduce this to INTEGRITY, which provides the
necessary level of restriction to protect the running kernel.
Similarly to commit c543cb4a5f07 ("ipv4: ensure rcu_read_lock() in
ipv4_link_failure()"), __ip_options_compile() must be called under rcu
protection.
Fixes: 3da1ed7ac398 ("net: avoid use IPCB in cipso_v4_error") Suggested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When using plugins, GCC requires that the -fplugin= options precedes
any of its plugin arguments appearing on the command line as well.
This is usually not a concern, but as it turns out, this requirement
is causing some issues with ARM's per-task stack protector plugin
and Kbuild's implementation of $(cc-option).
When the per-task stack protector plugin is enabled, and we tweak
the implementation of cc-option not to pipe the stderr output of
GCC to /dev/null, the following output is generated when GCC is
executed in the context of cc-option:
cc1: error: plugin arm_ssp_per_task_plugin should be specified before \
-fplugin-arg-arm_ssp_per_task_plugin-tso=1 in the command line
cc1: error: plugin arm_ssp_per_task_plugin should be specified before \
-fplugin-arg-arm_ssp_per_task_plugin-offset=24 in the command line
These errors will cause any option passed to cc-option to be treated
as unsupported, which is obviously incorrect.
The cause of this issue is the fact that the -fplugin= argument is
added to GCC_PLUGINS_CFLAGS, whereas the arguments above are added
to KBUILD_CFLAGS, and the contents of the former get filtered out of
the latter before being passed to the GCC running the cc-option test,
and so the -fplugin= option does not appear at all on the GCC command
line.
Adding the arguments to GCC_PLUGINS_CFLAGS instead of KBUILD_CFLAGS
would be the correct approach here, if it weren't for the fact that we
are using $(eval) to defer the moment that they are added until after
asm-offsets.h is generated, which is after the point where the contents
of GCC_PLUGINS_CFLAGS are added to KBUILD_CFLAGS. So instead, we have
to add our plugin arguments to both.
For similar reasons, we cannot append DISABLE_ARM_SSP_PER_TASK_PLUGIN
to KBUILD_CFLAGS, as it will be passed to GCC when executing in the
context of cc-option, whereas the other plugin arguments will have
been filtered out, resulting in a similar error and false negative
result as above. So add it to ccflags-y instead.
Fixes: 189af4657186da08 ("ARM: smp: add support for per-task stack canaries") Reported-by: Merlijn Wajer <merlijn@wizzup.org> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
A lenovo pixart mouse (17ef:608d) is afflicted common the the malfunction
where it disconnects and reconnects every minute--each time incrementing
the device number. This patch adds the device id of the device and
specifies that it needs the HID_QUIRK_ALWAYS_POLL quirk in order to
work properly.
Signed-off-by: Tony Fischetti <tony.fischetti@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When kmem_cache_alloc_bulk() attempts to allocate N objects from a percpu
freelist of length M, and N > M > 0, it will first remove the M elements
from the percpu freelist, then call ___slab_alloc() to allocate the next
element and repopulate the percpu freelist. ___slab_alloc() can re-enable
IRQs via allocate_slab(), so the TID must be bumped before ___slab_alloc()
to properly commit the freelist head change.
Fix it by unconditionally bumping c->tid when entering the slowpath.
When the uaccess .fixup section was renamed to .text.fixup, one case was
missed. Under ld.bfd, the orphaned section was moved close to .text
(since they share the "ax" bits), so things would work normally on
uaccess faults. Under ld.lld, the orphaned section was placed outside
the .text section, making it unreachable.
It is possible for a system with an ARMv8 timer to run a 32-bit kernel.
When this happens we will unconditionally have the vDSO code remove the
__vdso_gettimeofday and __vdso_clock_gettime symbols because
cntvct_functional() returns false since it does not match that
compatibility string.
Fixes: ecf99a439105 ("ARM: 8331/1: VDSO initialization, mapping, and synchronization") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The len used for skb_put_padto is wrong, it need to add len of hdr.
In qrtr_node_enqueue, local variable size_t len is assign with
skb->len, then skb_push(skb, sizeof(*hdr)) will add skb->len with
sizeof(*hdr), so local variable size_t len is not same with skb->len
after skb_push(skb, sizeof(*hdr)).
Then the purpose of skb_put_padto(skb, ALIGN(len, 4)) is to add add
pad to the end of the skb's data if skb->len is not aligned to 4, but
unfortunately it use len instead of skb->len, at this line, skb->len
is 32 bytes(sizeof(*hdr)) more than len, for example, len is 3 bytes,
then skb->len is 35 bytes(3 + 32), and ALIGN(len, 4) is 4 bytes, so
__skb_put_padto will do nothing after check size(35) < len(4), the
correct value should be 36(sizeof(*hdr) + ALIGN(len, 4) = 32 + 4),
then __skb_put_padto will pass check size(35) < len(36) and add 1 byte
to the end of skb's data, then logic is correct.
function of skb_push:
void *skb_push(struct sk_buff *skb, unsigned int len)
{
skb->data -= len;
skb->len += len;
if (unlikely(skb->data < skb->head))
skb_under_panic(skb, len, __builtin_return_address(0));
return skb->data;
}
function of skb_put_padto
static inline int skb_put_padto(struct sk_buff *skb, unsigned int len)
{
return __skb_put_padto(skb, len, true);
}
function of __skb_put_padto
static inline int __skb_put_padto(struct sk_buff *skb, unsigned int len,
bool free_on_error)
{
unsigned int size = skb->len;
if (unlikely(size < len)) {
len -= size;
if (__skb_pad(skb, len, free_on_error))
return -ENOMEM;
__skb_put(skb, len);
}
return 0;
}
Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Wen Gong <wgong@codeaurora.org> Cc: Doug Anderson <dianders@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
commit 01e99aeca397 ("blk-mq: insert passthrough request into
hctx->dispatch directly") may change to add flush request to the tail
of dispatch by applying the 'add_head' parameter of
blk_mq_sched_insert_request.
Turns out this way causes performance regression on NCQ controller because
flush is non-NCQ command, which can't be queued when there is any in-flight
NCQ command. When adding flush rq to the front of hctx->dispatch, it is
easier to introduce extra time to flush rq's latency compared with adding
to the tail of dispatch queue because of S_SCHED_RESTART, then chance of
flush merge is increased, and less flush requests may be issued to
controller.
So always insert flush request to the front of dispatch queue just like
before applying commit 01e99aeca397 ("blk-mq: insert passthrough request
into hctx->dispatch directly").
Cc: Damien Le Moal <Damien.LeMoal@wdc.com> Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Fixes: 01e99aeca397 ("blk-mq: insert passthrough request into hctx->dispatch directly") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
journal_head::b_transaction and journal_head::b_next_transaction could
be accessed concurrently as noticed by KCSAN,
LTP: starting fsync04
/dev/zero: Can't open blockdev
EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
==================================================================
BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2]
write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70:
__jbd2_journal_refile_buffer+0xdd/0x210 [jbd2]
__jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569
jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2]
(inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034
kjournald2+0x13b/0x450 [jbd2]
kthread+0x1cd/0x1f0
ret_from_fork+0x27/0x50
read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68:
jbd2_write_access_granted+0x1b2/0x250 [jbd2]
jbd2_write_access_granted at fs/jbd2/transaction.c:1155
jbd2_journal_get_write_access+0x2c/0x60 [jbd2]
__ext4_journal_get_write_access+0x50/0x90 [ext4]
ext4_mb_mark_diskspace_used+0x158/0x620 [ext4]
ext4_mb_new_blocks+0x54f/0xca0 [ext4]
ext4_ind_map_blocks+0xc79/0x1b40 [ext4]
ext4_map_blocks+0x3b4/0x950 [ext4]
_ext4_get_block+0xfc/0x270 [ext4]
ext4_get_block+0x3b/0x50 [ext4]
__block_write_begin_int+0x22e/0xae0
__block_write_begin+0x39/0x50
ext4_write_begin+0x388/0xb50 [ext4]
generic_perform_write+0x15d/0x290
ext4_buffered_write_iter+0x11f/0x210 [ext4]
ext4_file_write_iter+0xce/0x9e0 [ext4]
new_sync_write+0x29c/0x3b0
__vfs_write+0x92/0xa0
vfs_write+0x103/0x260
ksys_write+0x9d/0x130
__x64_sys_write+0x4c/0x60
do_syscall_64+0x91/0xb05
entry_SYSCALL_64_after_hwframe+0x49/0xbe
5 locks held by fsync04/25724:
#0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260
#1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4]
#2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
#3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4]
#4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2]
irq event stamp: 1407125
hardirqs last enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
softirqs last enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0
Reported by Kernel Concurrency Sanitizer on:
CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
The plain reads are outside of jh->b_state_lock critical section which result
in data races. Fix them by adding pairs of READ|WRITE_ONCE().
Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Qian Cai <cai@lca.pw> Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pw Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
We can't just use the top bits of the last sync event as they could be
off-by-one every 65,536 seconds, giving an error in reconstruction of
65,536 seconds.
This patch uses the difference in the bottom 16 bits (mod 2^16) to
calculate an offset that needs to be applied to the last sync event to
get to the current time.
Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Acked-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Packet forwarding is not working in rmnet bridge mode.
Because when a packet is forwarded, skb_push() for an ethernet header
is needed. But it doesn't call skb_push().
So, the ethernet header will be lost.
Test commands:
modprobe rmnet
ip netns add nst
ip netns add nst2
ip link add veth0 type veth peer name veth1
ip link add veth2 type veth peer name veth3
ip link set veth1 netns nst
ip link set veth3 netns nst2
ip link add rmnet0 link veth0 type rmnet mux_id 1
ip link set veth2 master rmnet0
ip link set veth0 up
ip link set veth2 up
ip link set rmnet0 up
ip a a 192.168.100.1/24 dev rmnet0
ip netns exec nst ip link set veth1 up
ip netns exec nst ip a a 192.168.100.2/24 dev veth1
ip netns exec nst2 ip link set veth3 up
ip netns exec nst2 ip a a 192.168.100.3/24 dev veth3
ip netns exec nst2 ping 192.168.100.2
Fixes: 60d58f971c10 ("net: qualcomm: rmnet: Implement bridge mode") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In order to attach a bridge interface to the rmnet interface,
"master" operation is used.
(e.g. ip link set dummy1 master rmnet0)
But, in the rmnet_add_bridge(), which is a callback of ->ndo_add_slave()
doesn't register lower interface.
So, ->ndo_del_slave() doesn't work.
There are other problems too.
1. It couldn't detect circular upper/lower interface relationship.
2. It couldn't prevent stack overflow because of too deep depth
of upper/lower interface
3. It doesn't check the number of lower interfaces.
4. Panics because of several reasons.
The root problem of these issues is actually the same.
So, in this patch, these all problems will be fixed.
Test commands:
modprobe rmnet
ip link add dummy0 type dummy
ip link add rmnet0 link dummy0 type rmnet mux_id 1
ip link add dummy1 master rmnet0 type dummy
ip link add dummy2 master rmnet0 type dummy
ip link del rmnet0
ip link del dummy2
ip link del dummy1
Fixes: 60d58f971c10 ("net: qualcomm: rmnet: Implement bridge mode") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
netdev_upper_dev_link() is useful to manage lower/upper interfaces.
And this function internally validates looping, maximum depth.
All or most virtual interfaces that could have a real interface
(e.g. macsec, macvlan, ipvlan etc.) use lower/upper infrastructure.
Test commands:
modprobe rmnet
ip link add dummy0 type dummy
ip link add rmnet1 link dummy0 type rmnet mux_id 1
for i in {2..100}
do
let A=$i-1
ip link add rmnet$i link rmnet$A type rmnet mux_id $i
done
ip link del dummy0
The purpose of the test commands is to make stack overflow.
Fixes: b37f78f234bf ("net: qualcomm: rmnet: Fix crash on real dev unregistration") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Basically, duplicate mux id isn't be allowed.
So, the creation of rmnet will be failed if there is duplicate mux id
is existing.
But, changelink routine doesn't check duplicate mux id.
Test commands:
modprobe rmnet
ip link add dummy0 type dummy
ip link add rmnet0 link dummy0 type rmnet mux_id 1
ip link add rmnet1 link dummy0 type rmnet mux_id 2
ip link set rmnet1 type rmnet mux_id 1
Fixes: 23790ef12082 ("net: qualcomm: rmnet: Allow to configure flags for existing devices") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The notifier_call() of the slave interface removes rmnet interface with
unregister_netdevice_queue().
But, before calling unregister_netdevice_queue(), it acquires
rcu readlock.
In the RCU critical section, sleeping isn't be allowed.
But, unregister_netdevice_queue() internally calls synchronize_net(),
which would sleep.
So, suspicious RCU usage warning occurs.
Test commands:
modprobe rmnet
ip link add dummy0 type dummy
ip link add dummy1 type dummy
ip link add rmnet0 link dummy0 type rmnet mux_id 1
ip link set dummy1 master rmnet0
ip link del dummy0
rmnet_get_port() internally calls rcu_dereference_rtnl(),
which checks RTNL.
But rmnet_get_port() could be called by packet path.
The packet path is not protected by RTNL.
So, the suspicious RCU usage problem occurs.
Test commands:
modprobe rmnet
ip netns add nst
ip link add veth0 type veth peer name veth1
ip link set veth1 netns nst
ip link add rmnet0 link veth0 type rmnet mux_id 1
ip netns exec nst ip link add rmnet1 link veth1 type rmnet mux_id 1
ip netns exec nst ip link set veth1 up
ip netns exec nst ip link set rmnet1 up
ip netns exec nst ip a a 192.168.100.2/24 dev rmnet1
ip link set veth0 up
ip link set rmnet0 up
ip a a 192.168.100.1/24 dev rmnet0
ping 192.168.100.2
Fixes: 23790ef12082 ("net: qualcomm: rmnet: Allow to configure flags for existing devices") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
rmnet registers IFLA_LINK interface as a lower interface.
But, IFLA_LINK could be NULL.
In the current code, rmnet doesn't check IFLA_LINK.
So, panic would occur.
Test commands:
modprobe rmnet
ip link add rmnet0 type rmnet mux_id 1
should use real receive queue number to configure hw rss
indirect table rather than maximal queue number
Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
a reserved field is used to signify prime physical function index
in the latest firmware version, so we must assign a value to it
correctly
Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
can not use a local variable as an input parameter of
irq_set_affinity_hint
Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The firmware paths for the VSC8584 PHYs not not contain the leading
'microchip/' directory, as used in linux-firmware, resulting in an
error when probing the driver. This patch fixes it.
Fixes: a5afc1678044 ("net: phy: mscc: add support for VSC8584 PHY") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
As the description before netdev_run_todo, we cannot call free_netdev
before rtnl_unlock, fix it by reorder the code.
Signed-off-by: yangerkun <yangerkun@huawei.com> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When queueing a signal, we increment both the users count of pending
signals (for RLIMIT_SIGPENDING tracking) and we increment the refcount
of the user struct itself (because we keep a reference to the user in
the signal structure in order to correctly account for it when freeing).
That turns out to be fairly expensive, because both of them are atomic
updates, and particularly under extreme signal handling pressure on big
machines, you can get a lot of cache contention on the user struct.
That can then cause horrid cacheline ping-pong when you do these
multiple accesses.
So change the reference counting to only pin the user for the _first_
pending signal, and to unpin it when the last pending signal is
dequeued. That means that when a user sees a lot of concurrent signal
queuing - which is the only situation when this matters - the only
atomic access needed is generally the 'sigpending' count update.
This was noticed because of a particularly odd timing artifact on a
dual-socket 96C/192T Cascade Lake platform: when you get into bad
contention, on that machine for some reason seems to be much worse when
the contention happens in the upper 32-byte half of the cacheline.
As a result, the kernel test robot will-it-scale 'signal1' benchmark had
an odd performance regression simply due to random alignment of the
'struct user_struct' (and pointed to a completely unrelated and
apparently nonsensical commit for the regression).
Avoiding the double increments (and decrements on the dequeueing side,
of course) makes for much less contention and hugely improved
performance on that will-it-scale microbenchmark.
Quoting Feng Tang:
"It makes a big difference, that the performance score is tripled! bump
from original 17000 to 54000. Also the gap between 5.0-rc6 and
5.0-rc6+Jiri's patch is reduced to around 2%"
[ The "2% gap" is the odd cacheline placement difference on that
platform: under the extreme contention case, the effect of which half
of the cacheline was hot was 5%, so with the reduced contention the
odd timing artifact is reduced too ]
It does help in the non-contended case too, but is not nearly as
noticeable.
Reported-and-tested-by: Feng Tang <feng.tang@intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Philip Li <philip.li@intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The dtbs_check should be a phony target, but currently it is not
specified so.
'make dtbs_check' works even if a file named 'dtbs_check' exists
because it depends on another phony target, scripts_dtc, but we
should not rely on it.
Add dtbs_check to PHONY.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
For some reason, device may be in one situation which can't handle
FS request, so STS_RESOURCE is always returned and the FS request
will be added to hctx->dispatch. However passthrough request may
be required at that time for fixing the problem. If passthrough
request is added to scheduler queue, there isn't any chance for
blk-mq to dispatch it given we prioritize requests in hctx->dispatch.
Then the FS IO request may never be completed, and IO hang is caused.
So passthrough request has to be added to hctx->dispatch directly
for fixing the IO hang.
Fix this issue by inserting passthrough request into hctx->dispatch
directly together withing adding FS request to the tail of
hctx->dispatch in blk_mq_dispatch_rq_list(). Actually we add FS request
to tail of hctx->dispatch at default, see blk_mq_request_bypass_insert().
Then it becomes consistent with original legacy IO request
path, in which passthrough request is always added to q->queue_head.
Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The SDMA engine used by TEMAC halts operation when it has finished
processing of the last buffer descriptor in the buffer ring.
Unfortunately, no interrupt event is generated when this happens,
so we need to setup another mechanism to make sure DMA operation is
restarted when enough buffers have been added to the ring.
Fixes: 92744989533c ("net: add Xilinx ll_temac device driver") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In order to handle such failures more graceful, this change splits the
receive loop into one for consuming the received buffers, and one for
allocating new buffers.
When GFP_ATOMIC allocations fail, the receive will continue with the
buffers that is still there, and with the expectation that the allocations
will succeed in a later call to receive.
Fixes: 92744989533c ("net: add Xilinx ll_temac device driver") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
This adds error handling to the remaining dma_map_single() calls, so that
behavior is well defined if/when we run out of DMA memory.
Fixes: 92744989533c ("net: add Xilinx ll_temac device driver") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
It is possible that the interrupt handler fires and frees up space in
the TX ring in between checking for sufficient TX ring space and
stopping the TX queue in temac_start_xmit. If this happens, the
queue wake from the interrupt handler will occur before the queue is
stopped, causing a lost wakeup and the adapter's transmit hanging.
To avoid this, after stopping the queue, check again whether there is
sufficient space in the TX ring. If so, wake up the queue again.
This is a port of the similar fix in axienet driver,
commit 7de44285c1f6 ("net: axienet: Fix race condition causing TX hang").
Fixes: 23ecc4bde21f ("net: ll_temac: fix checksum offload logic") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
local->sta_mtx is held in __ieee80211_check_fast_rx_iface().
No need to use list_for_each_entry_rcu() as it also requires
a cond argument to avoid false lockdep warnings when not used in
RCU read-side section (with CONFIG_PROVE_RCU_LIST).
Therefore use list_for_each_entry();
The KS8851 requires that packet RX and TX are mutually exclusive.
Currently, the driver hopes to achieve this by disabling interrupt
from the card by writing the card registers and by disabling the
interrupt on the interrupt controller. This however is racy on SMP.
Replace this approach by expanding the spinlock used around the
ks_start_xmit() TX path to ks_irq() RX path to assure true mutual
exclusion and remove the interrupt enabling/disabling, which is
now not needed anymore. Furthermore, disable interrupts also in
ks_net_stop(), which was missing before.
Note that a massive improvement here would be to re-use the KS8851
driver approach, which is to move the TX path into a worker thread,
interrupt handling to threaded interrupt, and synchronize everything
with mutexes, but that would be a much bigger rework, for a separate
patch.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
usbnet creates network interfaces with min_mtu = 0 and
max_mtu = ETH_MAX_MTU.
These values are not modified by qmi_wwan when the network interface
is created initially, allowing, for example, to set mtu greater than 1500.
When a raw_ip switch is done (raw_ip set to 'Y', then set to 'N') the mtu
values for the network interface are set through ether_setup, with
min_mtu = ETH_MIN_MTU and max_mtu = ETH_DATA_LEN, not allowing anymore to
set mtu greater than 1500 (error: mtu greater than device maximum).
The patch restores the original min/max mtu values set by usbnet after a
raw_ip switch.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
fc_disc_gpn_id_resp() should be the last function using it so free it here
to avoid memory leak.
Link: https://lore.kernel.org/r/1579013000-14570-2-git-send-email-igor.druzhinin@citrix.com Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
We may end up with a NULL reg_rule after the loop in
handle_channel_custom() if the bandwidth didn't fit,
check if this is the case and bail out if so.
Fix a varargs-related bug in print_synth_event() which resulted in
strange output and oopses on 32-bit x86 systems. The problem is that
trace_seq_printf() expects the varargs to match the format string, but
print_synth_event() was always passing u64 values regardless. This
results in unspecified behavior when unpacking with va_arg() in
trace_seq_printf().
Add a function that takes the size into account when calling
trace_seq_printf().
It's possible that there is scheduled work left while the device is
already being removed, which can cause a kernel crash. Adding a flag
will avoid this.
Signed-off-by: Hanno Zulla <kontakt@hanno.de> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
It's required to call hid_hw_stop() once hid_hw_start() was called
previously, so error cases need to handle this. Also, hid_hw_close() is
not necessary during removal.
Signed-off-by: Hanno Zulla <kontakt@hanno.de> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The struct *bigben was allocated via devm_kzalloc() and then used as a
parameter in input_ff_create_memless(). This caused a double kfree
during removal of the device, since both the managed resource API and
ml_ff_destroy() in drivers/input/ff-memless.c would call kfree() on it.
Signed-off-by: Hanno Zulla <kontakt@hanno.de> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The Surfbook E11B uses the SIPODEV SP1064 touchpad, which does not supply
descriptors, so it has to be added to the override list.
BugLink: https://bugs.launchpad.net/bugs/1858299 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If the BIOS default timeout for the watchdog is too small userspace may
not have enough time to configure new timeout after opening the device
before the system is already reset. For this reason program default
timeout of 30 seconds in the driver probe and allow userspace to change
this from command line or through module parameter (wdat_wdt.timeout).
Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Magic Keyboards with more recent firmware (0x0100) report Fn key differently.
Without this patch, Fn key may not behave as expected and may not be
configurable via hid_apple fnmode module parameter.
Signed-off-by: Mansour Behabadi <mansour@oxplot.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In case the WDAT interface is broken, give the user an option to
ignore it to let a native driver bind to the watchdog device instead.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Use a more meaningful variable name for the invalidation request
that is distinct from the tmp variable that gets overwritten when
acquiring the invalidation semaphore.
Fixes: 4ed8a03740d0 ("drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10") Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Yong Zhao <Yong.Zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Before releasing the global mutex, we only unlink the hashtable
from the hash list, its proc file is still not unregistered at
this point. So syzbot could trigger a race condition where a
parallel htable_create() could register the same file immediately
after the mutex is released.
Move htable_remove_proc_entry() back to mutex protection to
fix this. And, fold htable_destroy() into htable_put() to make
the code slightly easier to understand.
Reported-and-tested-by: syzbot+d195fd3b9a364ddd6731@syzkaller.appspotmail.com Fixes: c4a3922d2d20 ("netfilter: xt_hashlimit: reduce hashlimit_mutex scope for htable_put()") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Kai-Heng Feng [Fri, 20 Mar 2020 07:39:37 +0000 (15:39 +0800)]
USB: Disable LPM on WD19's Realtek Hub
BugLink: https://bugs.launchpad.net/bugs/1868217
Realtek Hub (0bda:0x0487) used in Dell Dock WD19 sometimes drops off the
bus when bringing underlying ports from U3 to U0.
Disabling LPM on the hub during setting link state is not enough, so
let's disable LPM completely for this hub.
Mathias Nyman [Fri, 20 Mar 2020 07:39:36 +0000 (15:39 +0800)]
xhci: Finetune host initiated USB3 rootport link suspend and resume
BugLink: https://bugs.launchpad.net/bugs/1868217
Depending on the current link state the steps to resume the link to U0
varies. The normal case when a port is suspended (U3) we set the link
to U0 and wait for a port event when U3exit completed and port moved to
U0.
If the port is in U1/U2, then no event is issued, just set link to U0
If port is in Resume or Recovery state then the device has already
initiated resume, and this host initiated resume is racing against it.
Port event handler for device initiated resume will set link to U0,
just wait for the port to reach U0 before returning.
Kai-Heng Feng [Fri, 20 Mar 2020 07:39:35 +0000 (15:39 +0800)]
xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0
BugLink: https://bugs.launchpad.net/bugs/1868217
Like U3 case, xHCI spec doesn't specify the upper bound of U0 transition
time. The 20ms is not enough for some devices.
Intead of polling PLS or PLC, we can facilitate the port change event to
know that the link transits to U0 is completed.
While at it, also separate U0 and U3 case to make the code cleaner.
[variable rename to u3exit, and skip completion for usb2 ports -Mathias ] Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200312144517.1593-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 0200b9f790b0fc9e9a42f685f5ad54b23fe959f4 linux-next) Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Kai-Heng Feng [Fri, 20 Mar 2020 07:39:34 +0000 (15:39 +0800)]
xhci: Ensure link state is U3 after setting USB_SS_PORT_LS_U3
BugLink: https://bugs.launchpad.net/bugs/1868217
The xHCI spec doesn't specify the upper bound of U3 transition time. For
some devices 20ms is not enough, so we need to make sure the link state
is in U3 before further actions.
I've tried to use U3 Entry Capability by setting U3 Entry Enable in
config register, however the port change event for U3 transition
interrupts the system suspend process.
For now let's use the less ideal method by polling PLS.
[use usleep_range(), and shorten the delay time while polling -Mathias] Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200312144517.1593-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit eb002726fac7cefb98ff39ddb89e150a1c24fe85 linux-next) Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
UBUNTU: [Packaging] Add BugLink to update-version-dkms commit
BugLink: https://bugs.launchpad.net/bugs/1867790
The commit created by update-version-dkms doesn't have any BugLink, so it
gets added to the debian changelog under "* Miscellaneous Ubuntu changes".
Fix it by to adding a BugLink to https://bugs.launchpad.net/bugs/1786013
("Packaging resync"), which is the bug report being used for all the other
automated commits.
Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Paolo Pisati <paolo.pisati@canonical.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
AceLan Kao [Tue, 10 Mar 2020 01:48:36 +0000 (09:48 +0800)]
UBUNTU: SAUCE: r8169: disable ASPM L1.1
BguLink: https://bugs.launchpad.net/bugs/1836030
r8169 doesn't suport ASPM L1.1, so we don't have to disable ASPM
completely. Disable ASPM L1.1 doesn't affect the power consumption and
the network function keeps working after S3 test 30 times.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Heiner Kallweit [Tue, 10 Mar 2020 01:48:35 +0000 (09:48 +0800)]
PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code
BguLink: https://bugs.launchpad.net/bugs/1836030
Previously, CONFIG_PCIEASPM_DEBUG enabled "link_state" and "clk_ctl" sysfs
files that controlled ASPM. We believe these files were rarely if ever
used.
We recently added sysfs ASPM controls that are always present, so the debug
code is no longer needed. Removing this debug code has been discussed for
quite some time, see e.g. [0].
Heiner Kallweit [Tue, 10 Mar 2020 01:48:34 +0000 (09:48 +0800)]
PCI/ASPM: Add sysfs attributes for controlling ASPM link states
BugLink: https://bugs.launchpad.net/ubuntu/bugs/1836030
Add sysfs attributes to Endpoints and other Upstream Ports to control ASPM,
Clock PM, and L1 PM Substates. The new attributes are:
An attribute is only visible if both ends of the Link leading to the device
support the state. Writing y/1/on to the file enables the state; n/0/off
disables it.
These attributes can be used to tune the power/performance tradeoff for
individual devices.
Heiner Kallweit [Tue, 10 Mar 2020 01:48:33 +0000 (09:48 +0800)]
PCI/ASPM: Add pcie_aspm_get_link()
BugLink: https://bugs.launchpad.net/bugs/1836030
Factor out getting the link associated with a pci_dev and use this helper
where appropriate. In addition this helper will be used in a subsequent
patch of this series.
BugLink: https://bugs.launchpad.net/bugs/1836030
The lifetime of the link_state structure (bridge->link_state) is not the
same as the lifetime of "bridge" itself. The link_state is allocated by
pcie_aspm_init_link_state() after children of the bridge have been
enumerated, and it is deallocated by pcie_aspm_exit_link_state() after all
children of the bridge (but not the bridge itself) have been removed.
Previously pcie_aspm_enabled() acquired aspm_lock to ensure that
link_state was not deallocated while we're looking at it. But the fact
that the caller of pcie_aspm_enabled() holds a reference to @pdev means
there's always at least one child of the bridge, which means link_state
can't be deallocated.
Remove the unnecessary locking in pcie_aspm_enabled().
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 5e0c21c75e8c08375a69710527e4a921b897cb7e) Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Heiner Kallweit [Tue, 10 Mar 2020 01:48:31 +0000 (09:48 +0800)]
PCI/ASPM: Allow re-enabling Clock PM
BugLink: https://bugs.launchpad.net/bugs/1836030
Previously Clock PM could not be re-enabled after being disabled by
pci_disable_link_state() because clkpm_capable was reset. Change this by
adding a clkpm_disable field similar to aspm_disable.
Heiner Kallweit [Tue, 10 Mar 2020 01:48:30 +0000 (09:48 +0800)]
PCI/ASPM: Add L1 PM substate support to pci_disable_link_state()
BugLink: https://bugs.launchpad.net/bugs/1836030
Add support for disabling states L1.1 and L1.2 to pci_disable_link_state().
Allow separate control of ASPM and PCI PM L1 substates.
Link: https://lore.kernel.org/r/157048753005.11757.2228541207280057256.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
(cherry picked from commit 694c5d5b4625fe4617990beb02eedb176e8309c9) Signed-off-by: Jeff Lane <jeffrey.lane@canonical.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Link: https://lore.kernel.org/r/157048752420.11757.3464951542864727227.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
(cherry picked from commit 0fa31a88bfd23e97a261956ae3c822f5be4e31a9) Signed-off-by: Jeff Lane <jeffrey.lane@canonical.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Link: https://lore.kernel.org/r/157048751833.11757.11996314786914610803.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
(cherry picked from commit 5b083b305b49f65269b888885455b8c0cf1a52e4) Signed-off-by: Jeff Lane <jeffrey.lane@canonical.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Link: https://lore.kernel.org/r/157048750055.11757.9689400788261610618.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
(cherry picked from commit c2922f174fa0fbb699c3bd0ad40c73d067a90197) Signed-off-by: Jeff Lane <jeffrey.lane@canonical.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Link: https://lore.kernel.org/r/157048749461.11757.10013040278241807855.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: koshyaji <ajish.koshy@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
(cherry picked from commit 21432010d5282a9aa4d0946816468849bd2fe1b5) Signed-off-by: Jeff Lane <jeffrey.lane@canonical.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Murthy Bhat [Mon, 7 Oct 2019 22:31:28 +0000 (17:31 -0500)]
scsi: smartpqi: fix call trace in device discovery
BugLink: https://bugs.launchpad.net/bugs/1864484
Use sas_phy_delete rather than sas_phy_free which, according to
comments, should not be called for PHYs that have been set up
successfully.
Link: https://lore.kernel.org/r/157048748876.11757.17773443136670011786.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
(cherry picked from commit b969261134c1b990b96ea98fe5e0fcf8ec937c04) Signed-off-by: Jeff Lane <jeffrey.lane@canonical.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
drivers/scsi/smartpqi/smartpqi_init.c: In function 'pqi_driver_version_show':
drivers/scsi/smartpqi/smartpqi_init.c:6164:24: warning:
variable 'ctrl_info' set but not used [-Wunused-but-set-variable]
commit 6d90615f1346 ("scsi: smartpqi: add sysfs entries") added it but
it was never used. Also remove variable 'shost'.
projects / mirror_ubuntu-focal-kernel.git / log