Dave Airlie [Tue, 12 Jul 2022 01:07:30 +0000 (11:07 +1000)]
Merge tag 'amd-drm-next-5.20-2022-07-05' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.20-2022-07-05:
amdgpu:
- Various spelling and grammer fixes
- Various eDP fixes
- Various DMCUB fixes
- VCN fixes
- GMC 11 fixes
- RAS fixes
- TMZ support for GC 10.3.7
- GPUVM TLB flush fixes
- SMU 13.0.x updates
- DCN 3.2 Support
- DCN 3.2.1 Support
- MES updates
- GFX11 modifiers support
- USB-C fixes
- MMHUB 3.0.1 support
- SDMA 6.0 doorbell fixes
- Initial devcoredump support
- Enable high priority gfx queue on asics which support it
- Enable GPU reset for SMU 13.0.4
- OLED display fixes
- MPO fixes
- DC frame size fixes
- ASPM support for PCIE 7.4/7.6
- GPU reset support for SMU 13.0.0
- GFX11 updates
- VCN JPEG fix
- BACO support for SMU 13.0.7
- VCN instance handling fix
- GFX8 GPUVM TLB flush fix
- GPU reset rework
- VCN 4.0.2 support
- GTT size fixes
- DP link training fixes
- LSDMA 6.0.1 support
- Various backlight fixes
- Color encoding fixes
- Backlight config cleanup
- VCN 4.x unified queue cleanup
amdkfd:
- MMU notifier fixes
- Updates for GC 10.3.6 and 10.3.7
- P2P DMA support using dma-buf
- Add available memory IOCTL
- SDMA 6.0.1 fix
- MES fixes
- HMM profiler support
radeon:
- License fix
- Backlight config cleanup
UAPI:
- Add available memory IOCTL to amdkfd
Proposed userspace: https://www.mail-archive.com/amd-gfx@lists.freedesktop.org/msg75743.html
- HMM profiler support for amdkfd
Proposed userspace: https://lists.freedesktop.org/archives/amd-gfx/2022-June/080805.html
Dave Airlie [Fri, 1 Jul 2022 04:14:52 +0000 (14:14 +1000)]
Merge tag 'drm-intel-gt-next-2022-06-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Expose per tile media freq factor in sysfs (Ashutosh Dixit, Dale B Stimson)
- Document memory residency and Flat-CCS capability of obj (Ramalingam C)
- Disable GETPARAM lookups of I915_PARAM_[SUB]SLICE_MASK on Xe_HP+ (Matt Roper)
Cross-subsystem Changes:
- Rename intel-gtt symbols (Lucas De Marchi)
Core Changes:
Driver Changes:
- Support programming the EU priority in the GuC descriptor (DG2) (Matthew Brost)
- DG2 HuC loading support (Daniele Ceraolo Spurio)
- Fix build error without CONFIG_PM (YueHaibing)
- Enable THP on Icelake and beyond (Tvrtko Ursulin)
- Only setup private tmpfs mount when needed and fix logging (Tvrtko Ursulin)
- Make __guc_reset_context aware of guilty engines (Umesh Nerlige Ramappa)
- DG2 small bar memory probing fixes (Nirmoy Das)
- Remove unnecessary GuC err capture noise (Alan Previn)
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms (Maarten Lankhorst)
- Fix undefined behavior in GuC backend due to shift overflowing the constant (Borislav Petkov)
- New DG2 workarounds (Swathi Dhanavanthri, Anshuman Gupta)
- Report no hwconfig support on ADL-N (Balasubramani Vivekanandan)
- Fix error_state_read ptr + offset use (Alan Previn)
- Expose per tile media freq factor in sysfs (Ashutosh Dixit, Dale B Stimson)
- Fix memory leaks in per-gt sysfs (Ashutosh Dixit)
- Fix dma_resv fence handling in multi-batch execbuf (Nirmoy Das)
- Add extra registers to GPU error dump on Gen11+ (Stuart Summers)
- More PVC+DG2 workarounds (Matt Roper)
- Improve user experience and driver robustness under SIGINT or similar (Tvrtko Ursulin)
- Don't show engine classes not present (Tvrtko Ursulin)
- Improve on suspend / resume time with VT-d enabled (Thomas Hellström)
- Add missing else (katrinzhou)
- Don't leak lmem mapping in vma_evict (Juha-Pekka Heikkila)
- Add smem fallback allocation for dpt (Juha-Pekka Heikkila)
- Tweak the ordering in cpu_write_needs_clflush (Matthew Auld)
- Do not access rq->engine without a reference (Niranjana Vishwanathapura)
- Revert "drm/i915: Hold reference to intel_context over life of i915_request" (Niranjana Vishwanathapura)
- Don't update engine busyness stats too frequently (Alan Previn)
- Add additional steps for Wa_22011802037 for execlist backend (Umesh Nerlige Ramappa)
- Fix a lockdep warning at error capture (Nirmoy Das)
- Ponte Vecchio prep work and new blitter engines (Matt Roper, John Harrison, Lucas De Marchi)
- Read correct RP_STATE_CAP register (PVC) (Matt Roper)
- Define MOCS table for PVC (Ayaz A Siddiqui)
- Driver refactor and support Ponte Vecchio forcewake handling (Matt Roper)
- Remove additional 3D flags from PIPE_CONTROL (Ponte Vecchio) (Stuart Summers)
- XEHPSDV and PVC do not use HuC (Daniele Ceraolo Spurio)
- Extract stepping information from PCI revid (Ponte Vecchio) (Matt Roper)
- Add initial PVC workarounds (Stuart Summers)
- SSEU handling driver refactor and Ponte Vecchio support (Matt Roper)
- GuC depriv applies to PVC (Matt Roper)
- Add register steering (Ponte Vecchio) (Matt Roper)
- Add recommended MMIO setting (Ponte Vecchio) (Matt Roper)
- Move multicast register handling to a dedicated file (Matt Roper)
- Cleanup interface for MCR operations (Matt Roper)
- Extend i915_vma_pin_iomap() (CQ Tang)
- Re-do the intel-gtt split (Lucas De Marchi)
- Correct duplicated/misplaced GT register definitions (Matt Roper)
- Prefer "XEHP_" prefix for registers (Matt Roper)
- Don't use DRM_DEBUG_WARN_ON for unexpected l3bank/mslice config (Tvrtko Ursulin)
- Don't use DRM_DEBUG_WARN_ON for ring unexpectedly not idle (Tvrtko Ursulin)
- Make drop_pages() return bool (Lucas De Marchi)
- Fix CFI violation with show_dynamic_id() (Nathan Chancellor)
- Use i915_probe_error instead of drm_error in GuC code (Vinay Belgaumkar)
- Fix use of static in macro mismatch (Andi Shyti)
- Update tiled blits selftest (Bommu Krishnaiah)
- Future-proof platform checks (Matt Roper)
- Only include what's needed (Jani Nikula)
- remove accidental static from a local variable (Jani Nikula)
- Add global forcewake request to drpc (Vinay Belgaumkar)
- Fix spelling typo in comment (pengfuyuan)
- Increase timeout for live_parallel_switch selftest (Akeem G Abodunrin)
- Use non-blocking H2G for waitboost (Vinay Belgaumkar)
Rodrigo Siqueira [Thu, 30 Jun 2022 18:46:20 +0000 (14:46 -0400)]
drm/amd/display: Fix __muldf3 undefined for 32 bit compilation
Sometimes when trying to enable some feature, we have to define some
values with educated guesses, but we mark those values as TBD, which
means "To Be Determined". However, the correct way to approach it is by
loading that information from the firmware. Anyway, some of the values
that we were experimenting with caused this issue:
This was caused because we were trying to assign an unsigned int to a
double value which causes issues for 32-bit architecture. This issue can
be fixed by changing the value type.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Randy Dunlap <rdunlap@infradead.org> Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Wed, 19 Jan 2022 17:57:26 +0000 (12:57 -0500)]
drm/amdkfd: Bump KFD API version for SMI profiling event
Indicate SMI profiling events available.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Fri, 8 Apr 2022 14:25:11 +0000 (10:25 -0400)]
drm/amdkfd: Asynchronously free smi_client
The synchronize_rcu may take several ms, which noticeably slows down
applications close SMI event handle. Use call_rcu to free client->fifo
and client asynchronously and eliminate the synchronize_rcu call in the
user thread.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Thu, 20 Jan 2022 21:43:42 +0000 (16:43 -0500)]
drm/amdkfd: Add unmap from GPU SMI event
SVM range unmapped from GPUs when range is unmapped from CPU, or with
xnack on from MMU notifier when range is evicted or migrated.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Fri, 14 Jan 2022 02:24:20 +0000 (21:24 -0500)]
drm/amdkfd: Add user queue eviction restore SMI event
Output user queue eviction and restore event. User queue eviction may be
triggered by svm or userptr MMU notifier, TTM eviction, device suspend
and CRIU checkpoint and restore.
User queue restore may be rescheduled if eviction happens again while
restore.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Fri, 14 Jan 2022 00:28:13 +0000 (19:28 -0500)]
drm/amdkfd: Add migration SMI event
For migration start and end event, output timestamp when migration
starts, ends, svm range address and size, GPU id of migration source and
destination and svm range attributes,
Migration trigger could be prefetch, CPU or GPU page fault and TTM
eviction.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Fri, 14 Jan 2022 00:22:54 +0000 (19:22 -0500)]
drm/amdkfd: Add GPU recoverable fault SMI event
Use ktime_get_boottime_ns() as timestamp to correlate with other
APIs. Output timestamp when GPU recoverable fault starts and ends to
recover the fault, if migration happened or only GPU page table is
updated to recover, fault address, if read or write fault.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Thu, 13 Jan 2022 23:59:02 +0000 (18:59 -0500)]
drm/amdkfd: Enable per process SMI event
Process receive event from same process by default. Add a flag to be
able to receive event from all processes, this requires super user
permission.
Event using pid 0 to send the event to all processes, to keep the
default behavior of existing SMI events.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Thu, 20 Jan 2022 20:06:30 +0000 (15:06 -0500)]
drm/amdkfd: Add KFD SMI event IDs and triggers
Define new system management interface event IDs for migration, GPU
recoverable page fault, user queues eviction, restore and unmap from
GPU events and corresponding event triggers, those will be implemented
in the following patches.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Mon, 27 Jun 2022 01:35:10 +0000 (21:35 -0400)]
drm/amdkfd: fix cu mask for asics with wgps
GFX10 and up have work group processors (WGP) and WGP mode is the native
compile mode.
KFD and ROCr have no visibility into whether a dispatch is operating
in CU or WGP mode.
Enforce CU masking to be pairwise continguous in enablement and
round robin distribute CUs across the SEs in a pairwise manner to
assume WGP mode at all times.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 23 Jun 2022 16:37:40 +0000 (12:37 -0400)]
drm/amdgpu: fix documentation warning
Fixes this issue:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:5094: warning: expecting prototype for amdgpu_device_gpu_recover_imp(). Prototype was for amdgpu_device_gpu_recover() instead
Fixes: cf727044144d ("drm/amdgpu: Rename amdgpu_device_gpu_recover_imp back to amdgpu_device_gpu_recover") Reviewed-by: Kent Russell <kent.russell@amd.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lucas De Marchi [Tue, 28 Jun 2022 19:10:16 +0000 (12:10 -0700)]
iosys-map: Add per-word write
Like was done for read, provide the equivalent for write. Even if
current users are not in the hot path, this should future-proof it.
v2:
- Remove default from _Generic() - callers wanting to write more
than u64 should use iosys_map_memcpy_to()
- Add WRITE_ONCE() cases dereferencing the pointer when using system
memory
v3:
- Fix precedence issue when casting inside WRITE_ONCE(). By not using ()
around vaddr__ the offset was not part of the cast, but rather added
to it, producing a wrong address
- Remove compiletime_assert() as WRITE_ONCE() already contains it
Lucas De Marchi [Tue, 28 Jun 2022 19:10:15 +0000 (12:10 -0700)]
iosys-map: Add per-word read
Instead of always falling back to memcpy_fromio() for any size, prefer
using read{b,w,l}(). When reading struct members it's common to read
individual integer variables individually. Going through memcpy_fromio()
for each of them poses a high penalty.
Employ a similar trick as __seqprop() by using _Generic() to generate
only the specific call based on a type-compatible variable.
For a pariticular i915 workload producing GPU context switches,
__get_engine_usage_record() is particularly hot since the engine usage
is read from device local memory with dgfx, possibly multiple times
since it's racy. Test execution time for this test shows a ~12.5%
improvement with DG2:
Before:
nrepeats = 1000; min = 7.63243e+06; max = 1.01817e+07;
median = 9.52548e+06; var = 526149;
After:
nrepeats = 1000; min = 7.03402e+06; max = 8.8832e+06;
median = 8.33955e+06; var = 333113;
Other things attempted that didn't prove very useful:
1) Change the _Generic() on x86 to just dereference the memory address
2) Change __get_engine_usage_record() to do just 1 read per loop,
comparing with the previous value read
3) Change __get_engine_usage_record() to access the fields directly as it
was before the conversion to iosys-map
(3) did gave a small improvement (~3%), but doesn't seem to scale well
to other similar cases in the driver.
Additional test by Chris Wilson using gem_create from igt with some
changes to track object creation time. This happens to accidentally
stress this code path:
Pre iosys_map conversion of engine busyness:
lmem0: Creating 262144 4KiB objects took 59274.2ms
Unpatched:
lmem0: Creating 262144 4KiB objects took 108830.2ms
With readl (this patch):
lmem0: Creating 262144 4KiB objects took 61348.6ms
s/readl/READ_ONCE/
lmem0: Creating 262144 4KiB objects took 61333.2ms
So we do take a little bit more time than before the conversion, but
that is due to other factors: bringing the READ_ONCE back would be as
good as just doing this conversion.
v2:
- Remove default from _Generic() - callers wanting to read more
than u64 should use iosys_map_memcpy_from()
- Add READ_ONCE() cases dereferencing the pointer when using system
memory
v3:
- Fix precedence issue when casting inside READ_ONCE(). By not using ()
around vaddr__ the offset was not part of the cast, but rather added
to it, producing a wrong address
- Remove compiletime_assert() as READ_ONCE() already contains it
drm/amd/display: Re-org and cleanup the redundant code
[Why]
Redundant if-else cases for repeater and non-repeater checks
[How]
Without changing the core logic, rearranged the code by removing
redundant checks
Signed-off-by: Chandan Vurdigere Nataraj <chandan.vurdigerenataraj@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Tue, 28 Jun 2022 20:25:28 +0000 (16:25 -0400)]
drm/amd/display: expose additional modifier for DCN32/321
[Why&How]
Some userspace expect a backwards compatible modifier on DCN32/321. For
hardware with num_pipes more than 16, we expose the most efficient
modifier first. As a fall back method, we need to expose slightly inefficient
modifier AMD_FMT_MOD_TILE_GFX9_64K_R_X after the best option.
Also set the number of packers to fixed value as required per hardware
documentation. This value is cached during hardware initialization and
can be read through the base driver.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are 4 undocumented fields at struct amdgpu_display_manager.
Add documentation for them, fixing those warnings:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:544: warning: Function parameter or member 'dmub_outbox_params' not described in 'amdgpu_display_manager'
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:544: warning: Function parameter or member 'num_of_edps' not described in 'amdgpu_display_manager'
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:544: warning: Function parameter or member 'disable_hpd_irq' not described in 'amdgpu_display_manager'
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:544: warning: Function parameter or member 'dmub_aux_transfer_done' not described in 'amdgpu_display_manager'
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:544: warning: Function parameter or member 'delayed_hpd_wq' not described in 'amdgpu_display_manager'
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom Rix [Sun, 26 Jun 2022 14:46:15 +0000 (10:46 -0400)]
drm/amd/display: change to_dal_irq_source_dnc32() storage class specifier to static
sparse reports
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn32/irq_service_dcn32.c:39:20: warning: symbol 'to_dal_irq_source_dcn32' was not declared. Should it be static?
to_dal_irq_source_dnc32() is only referenced in irq_service_dnc32.c, so change its
storage class specifier to static.
Fixes: 0efd4374f6b4 ("drm/amd/display: add dcn32 IRQ changes") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom Rix [Sun, 26 Jun 2022 14:20:53 +0000 (10:20 -0400)]
drm/amd/display: Remove unused globals FORCE_RATE and FORCE_LANE_COUNT
sparse reports
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:3885:6: warning: symbol 'FORCE_RATE' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:3886:10: warning: symbol 'FORCE_LANE_COUNT' was not declared. Should it be static?
Neither of thse variables is used in dc_link_dp.c. Reviewing the commit listed in
the fixes tag shows neither was used in the original patch. So remove them.
Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 23 Jun 2022 16:34:18 +0000 (12:34 -0400)]
drm/amdgpu/display: drop set but unused variable
No longer used so drop it.
Fixes: ec457f837890 ("drm/amd/display: Drop unnecessary detect link code") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Tue, 28 Jun 2022 14:40:59 +0000 (10:40 -0400)]
drm/amdgpu: Fix typos in amdgpu_stop_pending_resets
Change amdggpu to amdgpu and pedning to pending
Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:
In function 'dc_link_reduce_mst_payload':
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:3782:32:
warning: variable 'ret' set but not used [-Wunused-but-set-variable]
3782 | enum act_return_status ret;
Removed the unused ret variable.
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nirmoy Das [Fri, 24 Jun 2022 11:08:21 +0000 (13:08 +0200)]
drm/i915: Fix a lockdep warning at error capture
For some platfroms we use stop_machine version of
gen8_ggtt_insert_page/gen8_ggtt_insert_entries to avoid a
concurrent GGTT access bug but this causes a circular locking
dependency warning:
Fix this by calling gen8_ggtt_insert_page/gen8_ggtt_insert_entries
directly at error capture which is concurrent GGTT access safe because
reset path make sure of that.
v2: Fix rebase conflict and added a comment.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5595 Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220624110821.29190-1-nirmoy.das@intel.com
Marek Vasut [Tue, 28 Jun 2022 17:41:52 +0000 (19:41 +0200)]
drm: lcdif: Add support for i.MX8MP LCDIF variant
Add support for i.MX8MP LCDIF variant. This is called LCDIFv3 and is
completely different from the LCDIFv3 found in i.MX23 in that it has
a completely scrambled register layout compared to all previous LCDIF
variants. The new LCDIFv3 also supports 36bit address space.
Add a separate driver which is really a fork of MXSFB driver with the
i.MX8MP LCDIF variant handling filled in.
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Tested-by: Martyn Welch <martyn.welch@collabora.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Robby Cai <robby.cai@nxp.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stefan Agner <stefan@agner.ch> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220628174152.167284-2-marex@denx.de
Marek Vasut [Tue, 28 Jun 2022 17:41:51 +0000 (19:41 +0200)]
dt-bindings: lcdif: Add compatible for i.MX8MP
Add compatible string for i.MX8MP LCDIF variant. This is called LCDIFv3
and is completely different from the LCDIFv3 found in i.MX23 in that it
has a completely scrambled register layout compared to all previous LCDIF
variants. The new LCDIFv3 also supports 36bit address space. However,
except for the complete bit reshuffling, this is still LCDIF and it still
works like one.
Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Robby Cai <robby.cai@nxp.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stefan Agner <stefan@agner.ch> Cc: devicetree@vger.kernel.org Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220628174152.167284-1-marex@denx.de
Marek Vasut [Fri, 24 Jun 2022 18:19:02 +0000 (20:19 +0200)]
drm/bridge: tc358767: Do not cache dsi_lanes twice
The DSI lane count can be accessed via the dsi device pointer,
make use of that. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220624181902.151959-1-marex@denx.de
This causes KFDTest KFDMemoryTest.MemoryRegister test failed on gfx9.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Follow up change to previous drm scheduler change.
Align refcount behaviour for amdgpu_job embedded HW fence with
classic pointer style HW fences by increasing refcount each
time emit is called so amdgpu code doesn't need to make workarounds
using amdgpu_job.job_run_counter to keep the HW fence refcount balanced.
Also since in the previous patch we resumed setting s_fence->parent to NULL
in drm_sched_stop switch to directly checking if job->hw_fence is
signaled to short circuit reset if already signed.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Tested-by: Yiqing Yao <yiqing.yao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/sched: Partial revert of 'drm/sched: Keep s_fence->parent pointer'
Problem:
This patch caused negative refcount as described in [1] because
for that case parent fence did not signal by the time of drm_sched_stop and hence
kept in pending list the assumption was they will not signal and
so fence was put to account for the s_fence->parent refcount but for
amdgpu which has embedded HW fence (always same parent fence)
drm_sched_fence_release_scheduled was always called and would
still drop the count for parent fence once more. For jobs that
never signaled this imbalance was masked by refcount bug in
amdgpu_fence_driver_clear_job_fences that would not drop
refcount on the fences that were removed from fence drive
fences array (against prevois insertion into the array in
get in amdgpu_fence_emit).
Fix:
Revert this patch and by setting s_job->s_fence->parent to NULL
as before prevent the extra refcount drop in amdgpu when
drm_sched_fence_release_scheduled is called on job release.
Also - align behaviour in drm_sched_resubmit_jobs_ext with that of
drm_sched_main when submitting jobs - take a refcount for the
new parent fence pointer and drop refcount for original kref_init
for new HW fence creation (or fake new HW fence in amdgpu - see next patch).
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Tested-by: Yiqing Yao <yiqing.yao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Prevent race between late signaled fences and GPU reset.
Problem:
After we start handling timed out jobs we assume there fences won't be
signaled but we cannot be sure and sometimes they fire late. We need
to prevent concurrent accesses to fence array from
amdgpu_fence_driver_clear_job_fences during GPU reset and amdgpu_fence_process
from a late EOP interrupt.
Fix:
Before accessing fence array in GPU disable EOP interrupt and flush
all pending interrupt handlers for amdgpu device's interrupt line.
v2: Switch from irq_get/put to full enable/disable_irq for amdgpu
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Add put fence in amdgpu_fence_driver_clear_job_fences
This function should drop the fence refcount when it extracts the
fence from the fence array, just as it's done in amdgpu_fence_process.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How]
Update the existing log with DP LT failure reason
Signed-off-by: Chandan Vurdigere Nataraj <chandan.vurdigerenataraj@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 14 Jun 2022 07:21:48 +0000 (15:21 +0800)]
drm/amd/pm: enable VR0 HOT support for SMU 13.0.0
Enable VR0 Hot support for SMU 13.0.0.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 3 Mar 2022 06:39:22 +0000 (14:39 +0800)]
drm/amdgpu: update GFX11 cs settings
Update GFX11 cs related settings.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 22 Jun 2022 14:36:58 +0000 (10:36 -0400)]
drm/amdgpu/display: reduce stack size in dml32_ModeSupportAndSystemConfigurationFull()
Move more stack variable in to dummy vars structure on the heap.
Fixes stack frame size errors:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'dml32_ModeSupportAndSystemConfigurationFull':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:3833:1: error: the frame size of 2720 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
3833 | } // ModeSupportAndSystemConfigurationFull
| ^
Fixes: dda4fb85e433 ("drm/amd/display: DML changes for DCN32/321") Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Rodrigo Siqueira Jordao <Rodrigo.Siqueira@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Stevenson [Mon, 13 Jun 2022 14:48:00 +0000 (16:48 +0200)]
drm/vc4: hdmi: Move pixel doubling from Pixelvalve to HDMI block
With the change to 2 pixels/clock, the pixel doubling in the PV
results in doubling each pair of pixels, ie ABABCDCD instead of AABBCCDD.
Move the pixel doubling to the HDMI block, however this means
that DBLCLK modes now fall foul of requiring even values for
all the horizontal timing parameters.
As both 480i and 576i fail this, attempt to fix up DBLCLK modes
that have odd timings values.
Dom Cobley [Mon, 13 Jun 2022 14:47:58 +0000 (16:47 +0200)]
drm/vc4: hdmi: Force modeset when bpc or format changes
Whenever the maximum BPC is changed, vc4_hdmi_encoder_compute_config()
might pick up a different BPC or format depending on the display
capabilities.
That change will have a number of side effects, including the clock
rates and whether the scrambling is enabled.
However, only drm_crtc_state.connectors_changed will be set to true,
since that properly only affects the connector.
This means that while drm_atomic_crtc_needs_modeset() will return true,
and thus drm_atomic_helper_commit_modeset_enables() will call our
encoder atomic_enable() hook, mode_changed will be false.
So crtc_set_mode() will not call our encoder .atomic_mode_set() hook. We
use this hook in vc4 to set the vc4_hdmi_connector_state.output_bpc (and
output_format), and will then reuse the value in .atomic_enable() to select
whether or not scrambling should be enabled.
However, since our clock rate is pre-computed during .atomic_check(), we
end up with the clocks properly configured, but the scrambling disabled,
leading to a blank screen.
Let's set mode_changed to true in our HDMI driver to force the update of
output_bpc, and thus prevent the issue entirely.
Increase the number of post-sync blanking lines on odd fields instead of
decreasing it on even fields. This makes the total number of lines
properly match the modelines.
Additionally fix the value of PV_VCONTROL_ODD_DELAY, which did not take
pixels_per_clock into account, causing some displays to invert the
fields when driven by bcm2711.
Dave Stevenson [Mon, 13 Jun 2022 14:47:55 +0000 (16:47 +0200)]
drm/vc4: hdmi: Add MISC_CONTROL register for vc4
The MISC_CONTROL register allows configuration of pixel repetition
for pixel doubling in the HDMI block instead of PixelValve.
It was already defined for vc5, so add it for vc4.
Dave Stevenson [Mon, 13 Jun 2022 14:47:54 +0000 (16:47 +0200)]
drm/vc4: hdmi: Add HDMI format detection registers to register list
The block can detect what the incoming image timings are for
debug purposes. Add them to the list of registers understood
by the driver to allow easy dumping of the values.
This bit ensures data island packets are never generated when disallowed
by HDCP. As no Pi boards support HDCP this is providing an unnecessary
restriction
Dom Cobley [Mon, 13 Jun 2022 14:47:52 +0000 (16:47 +0200)]
drm/vc4: hdmi: Skip writes to disabled packet RAM
This path actually occurs when audio is started during a hdmi mode set.
As the data will be written by vc4_hdmi_set_infoframes when packet RAM
is enabled again, don't treat as an error
Dom Cobley [Mon, 13 Jun 2022 14:47:51 +0000 (16:47 +0200)]
drm/vc4: hdmi: Stop checking for enabled output in audio
The current HDMI driver, in vc4_hdmi_audio_can_stream() checks whether
the display output is enabled.
This has been there in one form or the other since the introduction of
the audio support in the VC4 HDMI driver in commit bb7d78568814
("drm/vc4: Add HDMI audio support"), but no justification for this check
is in the commit message, or in the discussions around the patches.
One can only assume this was done to prevent a user from playing audio
on the ALSA soundcard when the monitor doesn't support it.
However, this is causing some issues. Indeed, Kodi, for example, was
hitting some errors if it was streaming audio during a modeset. With the
theory above, it does make sense, but the display and audio threads are
typically completely different processes with no opportunity to
synchronise which makes it hard to workaround.
Removing that check also doesn't seem to cause any trouble, so let's
just remove it.
Dave Stevenson [Mon, 13 Jun 2022 14:47:50 +0000 (16:47 +0200)]
drm/vc4: hdmi: Move HDMI reset to pm_resume
The BCM2835-37 found in the RaspberryPi 0 to 3 have a power domain
attached to the HDMI block, handled in Linux through runtime_pm.
That power domain is shared with the VEC block, so even if we put our
runtime_pm reference in the HDMI driver it would keep being on. If the
VEC is disabled though, the power domain would be disabled and we would
lose any initialization done in our bind implementation.
That initialization involves calling the reset function and initializing
the CEC registers.
Let's move the initialization to our runtime_resume implementation so
that we initialize everything properly if we ever need to.
Dave Stevenson [Mon, 13 Jun 2022 14:47:49 +0000 (16:47 +0200)]
drm/vc4: hdmi: Switch to pm_runtime_status_suspended
If the controller isn't clocked or its domain powered up, the register
accesses will either stall the CPU or return garbage, respectively.
Thus, we had a warning in our register access function to complain when
that kind of risky accesses were performed.
In order to check the runtime_pm power state, we were using
pm_runtime_active(), but it turns out that it will become active only
once the runtime_resume hook has been executed.
This prevents us from doing any WARN-free register access in our
runtime_resume() implementation, while this is valid.
Let's switch to pm_runtime_status_suspended() instead.
Fixes: 14e193b95604 ("drm/vc4: hdmi: Warn if we access the controller while disabled") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-23-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:48 +0000 (16:47 +0200)]
drm/vc4: hdmi: Reset HDMI MISC_CONTROL register
The HDMI block can repeat pixels for double clocked modes,
and the firmware is now configuring the block to do this as
the PV is doing it incorrectly when at 2pixels/clock.
If the kernel doesn't reset it then we end up with strange
modes.
Phil Elwell [Mon, 13 Jun 2022 14:47:44 +0000 (16:47 +0200)]
drm/vc4: hdmi: Disable audio if dmas property is present but empty
The dmas property is used to hold the dmaengine channel used for audio
output.
Older device trees were missing that property, so if it's not there we
disable the audio output entirely.
However, some overlays have set an empty value to that property, mostly
to workaround the fact that overlays cannot remove a property. Let's add
a test for that case and if it's empty, let's disable it as well.
Dave Stevenson [Mon, 13 Jun 2022 14:47:43 +0000 (16:47 +0200)]
drm/vc4: dsi: Add correct stop condition to vc4_dsi_encoder_disable iteration
vc4_dsi_encoder_disable is partially an open coded version of
drm_bridge_chain_disable, but it missed a termination condition
in the loop for ->disable which meant that no post_disable
calls were made.
Dave Stevenson [Mon, 13 Jun 2022 14:47:42 +0000 (16:47 +0200)]
drm/vc4: dsi: Fix dsi0 interrupt support
DSI0 seemingly had very little or no testing as a load of
the register mappings were incorrect/missing, so host
transfers always timed out due to enabling/checking incorrect
bits in the interrupt enable and status registers.
Dave Stevenson [Mon, 13 Jun 2022 14:47:41 +0000 (16:47 +0200)]
drm/vc4: dsi: Register dsi0 as the correct vc4 encoder type
vc4_dsi was registering both dsi0 and dsi1 as VC4_ENCODER_TYPE_DSI1
which seemed to work OK for a single DSI display, but fails
if there are two DSI displays connected.
Dave Stevenson [Mon, 13 Jun 2022 14:47:40 +0000 (16:47 +0200)]
drm/vc4: dsi: Correct pixel order for DSI0
For slightly unknown reasons, dsi0 takes a different pixel format
to dsi1, and that has to be set in the pixel valve.
Amend the setup accordingly.
Fixes: a86773d120d7 ("drm/vc4: Add support for feeding DSI encoders from the pixel valve.") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-14-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:39 +0000 (16:47 +0200)]
drm/vc4: dsi: Correct DSI divider calculations
The divider calculations tried to find the divider just faster than the
clock requested. However if it required a divider of 7 then the for loop
aborted without handling the "error" case, and could end up with a clock
lower than requested.
The integer divider from parent PLL to DSI clock is also capable of
going up to /255, not just /7 that the driver was trying. This allows
for slower link frequencies on the DSI bus where the resolution permits.
Correct the loop so that we always have a clock greater than requested,
and covering the whole range of dividers.
Fixes: 86c1b9eff3f2 ("drm/vc4: Adjust modes in DSI to work around the integer PLL divider.") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-13-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:32 +0000 (16:47 +0200)]
drm/vc4: plane: Fix margin calculations for the right/bottom edges
The current plane margin calculation code clips the right and bottom
edges of the range based using the left and top margins.
This is obviously wrong, so let's fix it.
Fixes: 666e73587f90 ("drm/vc4: Take margin setup into account when updating planes") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-6-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Maxime Ripard [Mon, 13 Jun 2022 14:47:30 +0000 (16:47 +0200)]
drm/vc4: kms: Use maximum FIFO load for the HVS clock rate
The core clock computation takes into account both the load due to the
input (ie, planes) and its output (ie, encoders).
However, while the input load needs to consider all the planes, and thus
sum all of their associated loads, the output happens mostly in
parallel.
Therefore, we need to consider only the maximum of all the output loads,
and not the sum like we were doing. This resulted in a clock rate way
too high which could be discarded for being too high by the clock
framework.
Since recent changes, the clock framework will even downright reject it,
leading to a core clock being too low for its current needs.
Maxime Ripard [Mon, 13 Jun 2022 14:47:29 +0000 (16:47 +0200)]
drm/vc4: kms: Warn if clk_set_min_rate fails
We currently ignore the clk_set_min_rate return code assuming it would
succeed. However, it can fail if we ask for a rate higher than the
current maximum for example.
Since we can't fail in atomic_commit, at least warn on failure.
Dave Stevenson [Mon, 13 Jun 2022 14:47:28 +0000 (16:47 +0200)]
drm/vc4: drv: Adopt the dma configuration from the HVS or V3D component
vc4_drv isn't necessarily under the /soc node in DT as it is a
virtual device, but it is the one that does the allocations.
The DMA addresses are consumed by primarily the HVS or V3D, and
those require VideoCore cache alias address mapping, and so will be
under /soc.
During probe find the a suitable device node for HVS or V3D,
and adopt the DMA configuration of that node.
Marek Vasut [Tue, 28 Jun 2022 00:34:07 +0000 (02:34 +0200)]
drm/doc: Fix comment typo
Replace apprpriately with appropriately.
Fixes: 1e4d84c6589e9 ("drm/doc: Polish plane composition property docs") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Sean Paul <seanpaul@chromium.org> Cc: Simon Ser <contact@emersion.fr> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20220628003407.77765-1-marex@denx.de
Vinay Belgaumkar [Thu, 23 Jun 2022 00:32:25 +0000 (17:32 -0700)]
drm/i915/guc/slpc: Use non-blocking H2G for waitboost
SLPC min/max frequency updates require H2G calls. We are seeing
timeouts when GuC channel is backed up and it is unable to respond
in a timely fashion causing warnings and affecting CI.
This is seen when waitboosting happens during a stress test.
this patch updates the waitboost path to use a non-blocking
H2G call instead, which returns as soon as the message is
successfully transmitted.
v2: Use drm_notice to report any errors that might occur while
sending the waitboost H2G request (Tvrtko)
v3: Add drm_notice inside force_min_freq (Ashutosh)
drm/i915/reset: Add additional steps for Wa_22011802037 for execlist backend
For execlists backend, current implementation of Wa_22011802037 is to
stop the CS before doing a reset of the engine. This WA was further
extended to wait for any pending MI FORCE WAKEUPs before issuing a
reset. Add the extended steps in the execlist path of reset.
In addition, extend the WA to gen11.
v2: (Tvrtko)
- Clarify comments, commit message, fix typos
- Use IS_GRAPHICS_VER for gen 11/12 checks
v3: (Daneile)
- Drop changes to intel_ring_submission since WA does not apply to it
- Log an error if MSG IDLE is not defined for an engine
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Fixes: f6aa0d713c88 ("drm/i915: Add Wa_22011802037 force cs halt") Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220621192105.2100585-1-umesh.nerlige.ramappa@intel.com
Alan Previn [Thu, 23 Jun 2022 02:31:57 +0000 (19:31 -0700)]
drm/i915/guc: Don't update engine busyness stats too frequently
Using two different types of workoads, it was observed that
guc_update_engine_gt_clks was being called too frequently and/or
causing a CPU-to-lmem bandwidth hit over PCIE. Details on
the workloads and numbers are in the notes below.
Background: At the moment, guc_update_engine_gt_clks can be invoked
via one of 3 ways. #1 and #2 are infrequent under normal operating
conditions:
1.When a predefined "ping_delay" timer expires so that GuC-
busyness can sample the GTPM clock counter to ensure it
doesn't miss a wrap-around of the 32-bits of the HW counter.
(The ping_delay is calculated based on 1/8th the time taken
for the counter go from 0x0 to 0xffffffff based on the
GT frequency. This comes to about once every 28 seconds at a
GT frequency of 19.2Mhz).
2.In preparation for a gt reset.
3.In response to __gt_park events (as the gt power management
puts the gt into a lower power state when there is no work
being done).
Root-cause: For both the workloads described farther below, it was
observed that when user space calls IOCTLs that unparks the
gt momentarily and repeats such calls many times in quick succession,
it triggers calling guc_update_engine_gt_clks as many times. However,
the primary purpose of guc_update_engine_gt_clks is to ensure we don't
miss the wraparound while the counter is ticking. Thus, the solution
is to ensure we skip that check if gt_park is calling this function
earlier than necessary.
Solution: Snapshot jiffies when we do actually update the busyness
stats. Then get the new jiffies every time intel_guc_busyness_park
is called and bail if we are being called too soon. Use half of the
ping_delay as a safe threshold.
NOTE1: Workload1: IGTs' gem_create was modified to create a file handle,
allocate memory with sizes that range from a min of 4K to the max supported
(in power of two step-sizes). Its maps, modifies and reads back the
memory. Allocations and modification is repeated until total memory
allocation reaches the max. Then the file handle is closed. With this
workload, guc_update_engine_gt_clks was called over 188 thousand times
in the span of 15 seconds while this test ran three times. With this patch,
the number of calls reduced to 14.
NOTE2: Workload2: 30 transcode sessions are created in quick succession.
While these sessions are created, pcm-iio tool was used to measure I/O
read operation bandwidth consumption sampled at 100 milisecond intervals
over the course of 20 seconds. The total bandwidth consumed over 20 seconds
without this patch was measured at average at 311KBps per sample. With this
patch, the number went down to about 175Kbps which is about a 43% savings.
The problem with this patch is that it makes i915_request to hold a
reference to intel_context, which in turn holds a reference on the VM.
This strong back referencing can lead to reference loops which leads
to resource leak.
An example is the upcoming VM_BIND work which requires VM to hold
a reference to some shared VM specific BO. But this BO's dma-resv
fences holds reference to the i915_request thus leading to reference
loop.
v2:
Do not use reserved requests for virtual engines
drm/i915: Do not access rq->engine without a reference
In i915_fence_get_driver_name(), user may not hold a
reference to rq->engine. Hence do not access it. Instead,
store required device private pointer in 'rq->i915' and use it.
Matt Roper [Fri, 24 Jun 2022 21:03:28 +0000 (14:03 -0700)]
drm/i915: Prefer "XEHP_" prefix for registers
We've been introducing new registers with a mix of "XEHP_"
(architecture) and "XEHPSDV_" (platform) prefixes. For consistency,
let's settle on "XEHP_" as the preferred form.
XEHPSDV_RP_STATE_CAP stays with its current name since that's truly a
platform-specific register and not something that applies to the Xe_HP
architecture as a whole.
XEHPSDV_FLAT_CCS_BASE_ADDR, GEN8_L3_LRA_1_GPGPU, and MMCD_MISC_CTRL were
duplicated between i915_reg.h and intel_gt_regs.h. These are all GT
registers, so we should drop the copy from i915_reg.h.
XEHPSDV_TILE0_ADDR_RANGE was defined in i915_reg.h, but really belongs
in intel_gt_regs.h. Move it.
Yannick Fertre [Fri, 3 Jun 2022 13:46:54 +0000 (15:46 +0200)]
drm/stm: ltdc: update hardware error management
The latest hardware version (0x40100) supports a hardware threshold
register (aka FUTR) to trigger a fifo underrun interrupt.
A software threshold has been implemented for other hardware versions.
The threshold is set to 128 by default.