The current code only works by chance. The event facility is a sysbus
device, but specifies in its class structure as parent the DeviceClass
(instead of a device class).
The init function in return lies therefore at the same position as
the init function of SysBusDeviceClass and gets triggered instead -
a very bad idea of doing that (e.g. the parameter types don't match).
Let's bring the initialization code up to date, initializing the event
facility + child events in .instance_init and moving the realization of
the child events out of the init call, into the realization step.
Device realization is now automatically performed when the event facility
itself is realized. That realization implicitly triggers realization of
the child bus, which in turn initializes the events.
Please note that we have to manually propagate the realization of the bus
children, common code still has a TODO set for that task.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
sclp/s390: rework sclp cpu hotplug device notification
Let's get rid of this strange local variable + irq logic and
work directly on the QOM. (hint: what happens if two such devices
are created?)
We could introduce proper QOM class + state for the cpu hotplug device,
however that would result in too much overhead for a simple
"trigger_signal" function.
Also remove one unnecessary class function initialization.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
s390x/kvm: make setting of in-kernel irq routes more efficient
When we add new adapter routes we call kvm_irqchip_add_route() for every
virtqueue and in the same step also do the KVM_SET_GSI_ROUTING ioctl.
This is unnecessary costly as the interface allows us to set multiple
routes in one go. Let's first add all routes to the table stored in the
global kvm_state and then do the ioctl to commit the routes to the
in-kernel irqchip.
This saves us several ioctls to the kernel where for each call a list
is reallocated and populated.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
pc-bios/s390-ccw: Device detection in higher subchannel sets
If no bootdevice was specified, we try to autodetect a suitable IPL
device. Current code only searched in subchannel set 0; extend this
search to higher subchannel sets as well.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
When executing the start function, we should start with a clear state
regarding subchannel and device status; it is easy to forget updating one
of them after the ccw has been processed.
Note that we don't need to care about resetting the various control
fields: They are cleared by tsch(), and if they were still pending,
we wouldn't be able to execute the start function in the first
place.
Also note that we don't want to clear cstat/dstat if a suspended
subchannel is resumed.
This fixes a bug where we would continue to present channel-program
check in cstat even though later ccw requests for the subchannel
finished without error (i.e. cstat should be 0).
Cc: qemu-stable@nongnu.org Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Pierre Morel [Wed, 15 Jul 2015 14:16:20 +0000 (16:16 +0200)]
s390x/css: handle ccw-0 TIC correctly
In CCW-0 format TIC command 4 highest bits are ignored in the subchannel.
In CCW-1 format the TIC command 4 highest bits must be 0.
To convert TIC from CCW-0 to CCW-1 we clear the 4 highest bits
to guarantee compatibility.
Peter Maydell [Mon, 7 Sep 2015 10:23:08 +0000 (11:23 +0100)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 04 Sep 2015 20:45:33 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
quorum: validate vote threshold against num_children even if read-pattern is fifo
qcow2: reorder fields in Qcow2CachedTable to reduce padding
docs: document how to configure the qcow2 L2/refcount caches
qcow2: add option to clean unused cache entries after some time
qcow2: mark the memory as no longer needed after qcow2_cache_empty()
iotests: Warn if python subprocess is killed
iotests: Do not suppress segfaults in bash tests
iotests: Respect -nodefaults in tests 41 and 55
iotests: More options for VM.add_drive()
qemu-img: Fix crash in amend invocation
block/raw-posix: Use raw_normalize_devicepath()
qemu-iotests: s390x: fix test 130
qemu-iotests: s390x: fix test 049, reject negative sizes in QemuOpts
qemu-iotests: s390x: fix test 041 and 055
qemu-iotests: disable default qemu devices for cross-platform compatibility
qemu-iotests: qemu machine type support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 7 Sep 2015 09:43:18 +0000 (10:43 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150907' into staging
target-arm queue:
* cleanup to use g_new() and friends
* support semihosting in A64
* add SMBIOS support to mach-virt
* remove hw_error() usages
* fix bug in the AArch32:AArch64 register mapping
* add a second PCI memory window in highmem on virt board
* fix bug in arm_excp_unmasked()
* add i.MX31 SoC
* remove restriction on handling affinity values in virt board
# gpg: Signature made Mon 07 Sep 2015 10:40:48 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
* remotes/pmaydell/tags/pull-target-arm-20150907: (27 commits)
arm/virt: Add full-sized CPU affinity handling
target-arm: Refactor CPU affinity handling
i.MX: Add i2C devices to i.MX31 SOC
i.MX: Add qtest support for I2C device emulator.
i.MX: Add the i.MX25 PDK platform
i.MX: Add SOC support for i.MX25
i.MX: Add FEC Ethernet Emulator
i.MX: Add I2C controller emulator
i.MX: KZM: use standalone i.MX31 SOC support
i.MX: Add SOC support for i.MX31
target-arm: Fix arm_excp_unmasked() function
hw/arm/virt: Add high MMIO PCI region, 512G in size
target-arm: Fix AArch32:AArch64 general-purpose register mapping
arm: Remove hw_error() usages.
arm: cpu: assert() on no-EL2 virt IRQ error condition.
smbios: implement smbios support for mach-virt
smbios: add smbios 3.0 support
target-arm: Wire up HLT 0xf000 as the A64 semihosting instruction
target-arm/arm-semi.c: SYS_EXIT on A64 takes a parameter block
target-arm/arm-semi.c: Implement A64 specific SyncCacheRange call
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pavel Fedin [Mon, 7 Sep 2015 09:39:31 +0000 (10:39 +0100)]
arm/virt: Add full-sized CPU affinity handling
At least with KVM, currently there's no reason why QEMU would not be
capable of handling Aff3 != 0. This commit fixes up FDT creation in such
a case.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-id: eef5a86e6d9a313780dbc23b35fcb65df42a3e9e.1441366248.git.p.fedin@samsung.com
[PMM: folded two overlong lines] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is based on mcf_fec.c FEC implementation for Coldfire
* A generic PHY was added (borrowwed from LAN9118)
* The buffer management is also modified as buffers are
slightly different between Coldfire and i.MX
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: fb314f8a120aa49f8f6ad886f312c649b484fb5a.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the KZM board to use the i.MX31 SoC defintition instead of
redefining the entire SoC on the machine level. Major rewrite of the
machine init code.
While touching the memory map comment de-indent to the correct level
of indentation.
This obsoletes the legacy i.MX device device creation helpers which are removed.
Tested by booting a minimal Linux system on the emulated platform
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 5e783561f092e1c939562fdff001f1ab1194b07f.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is an error in arm_excp_unmasked() function:
bitwise operator & is used with integer and bool operands
causing an incorrect zeroed result.
The patch fixes it.
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1441209238-16881-1-git-send-email-afarallax@yandex.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pavel Fedin [Mon, 7 Sep 2015 09:39:29 +0000 (10:39 +0100)]
hw/arm/virt: Add high MMIO PCI region, 512G in size
This large region is necessary for some devices like ivshmem and video cards
32-bit kernels can be built without LPAE support. In this case such a kernel
will not be able to use PCI controller which has windows in high addresses.
In order to work around the problem, "highmem" option is introduced. It
defaults to on on, but can be manually set to off in order to be able to run
those old 32-bit guests.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
[PMM: Added missing ULL suffixes and a comment to the a15memmap[] entry] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is an error in functions aarch64_sync_32_to_64() and
aarch64_sync_64_to_32() with mapping of registers between AArch32 and
AArch64. This commit fixes the mapping to match the v8 ARM ARM
section D1.20.1 (table D1-77).
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1440796451-15276-1-git-send-email-afarallax@yandex.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tidied commit message a bit] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All of these hw_errors are fatal and indicate something wrong with
QEMU implementation.
Convert to g_assert_not_reached.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 169194d09017e5725535d31a1507d454c0043706.1440842587.git.crosthwaite.peter@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
arm: cpu: assert() on no-EL2 virt IRQ error condition.
Replace the hw_error() for no-EL2 VIRQ with an assert.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 93b6acdee6cafe8ff0422a294a5640c3d35f0e17.1440842587.git.crosthwaite.peter@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support for SMBIOS 3.0 entry point. When caller invokes
smbios_set_defaults(), it can specify entry point as 2.1 or 3.0. Then
smbios_get_tables() will return the entry point table in right format.
Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1440615870-9518-2-git-send-email-wei@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 7 Sep 2015 09:39:28 +0000 (10:39 +0100)]
target-arm: Wire up HLT 0xf000 as the A64 semihosting instruction
For the A64 instruction set, the semihosting call instruction
is 'HLT 0xf000'. Wire this up to call do_arm_semihosting()
if semihosting is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christopher Covington <christopher.covington@linaro.org> Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-10-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 7 Sep 2015 09:39:28 +0000 (10:39 +0100)]
target-arm/arm-semi.c: SYS_EXIT on A64 takes a parameter block
The A64 semihosting API changes the interface for SYS_EXIT so
that instead of taking a single exception type in a register,
it takes a parameter block containing the exception type and
a sub-code. Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-9-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 7 Sep 2015 09:39:28 +0000 (10:39 +0100)]
target-arm/arm-semi.c: Implement A64 specific SyncCacheRange call
The A64 semihosting ABI defines a new call SyncCacheRange
for doing a 'clean D-cache and invalidate I-cache' sequence.
Since QEMU doesn't implement caches, we can implement this as a nop.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christopher Covington <christopher.covington@linaro.org> Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-8-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 7 Sep 2015 09:39:28 +0000 (10:39 +0100)]
target-arm/arm-semi.c: Support widening APIs to 64 bits
The 64-bit A64 semihosting API has some pervasive changes from
the 32-bit version:
* all parameter blocks are arrays of 64-bit values, not 32-bit
* the semihosting call number is passed in W0
* the return value is a 64-bit value in X0
Implement the necessary handling for this widening.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christopher Covington <christopher.covington@linaro.org> Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-7-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 7 Sep 2015 09:39:27 +0000 (10:39 +0100)]
include/exec/softmmu-semi.h: Add support for 64-bit values
Add support for getting and setting 64-bit values in the
softmmu semihosting support functions. This will be needed
for 64-bit ARM semihosting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-6-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 7 Sep 2015 09:39:27 +0000 (10:39 +0100)]
target-arm/arm-semi.c: Factor out repeated 'return env->regs[0]'
Factor out a repeated pattern in the semihosting code:
gdb_do_syscall(arm_semi_cb, "system,%s", arg0, (int)arg1+1);
/* arm_semi_cb sets env->regs[0] to the syscall return value */
return env->regs[0];
For A64 the return value will go in a different register; pull
the sequence out into its own function that passes the return
value in a static variable rather than overloading regs[0]
for the purpose, so the code will work on both A32/T32 and A64.
Note that the lack-of-synchronization bug noted in the FIXME
comment is not introduced by this commit, but was already present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christopher Covington <christopher.covington@linaro.org> Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-5-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 7 Sep 2015 09:39:27 +0000 (10:39 +0100)]
gdbstub: Implement gdb_do_syscallv()
Implement a variant of the existing gdb_do_syscall() which
takes a va_list.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-4-git-send-email-peter.maydell@linaro.org
Print semihosting debugging information before the
do_arm_semihosting() call so that angel_SWIreason_ReportException,
which causes the function to not return, gets the same debug prints as
other semihosting calls. Also print out the semihosting call number.
Signed-off-by: Christopher Covington <christopher.covington@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-3-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 7 Sep 2015 09:39:27 +0000 (10:39 +0100)]
target-arm/arm-semi.c: Fix broken SYS_WRITE0 via gdb
A spurious trailing "\n" in the gdb syscall format string used
for SYS_WRITE0 meant that gdb would reject the remote syscall,
with the effect that the output from the guest was silently dropped.
Remove the newline so that gdb accepts the packet.
Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
arm: Use g_new() & friends where that makes obvious sense
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1440524394-15640-1-git-send-email-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Kevin Wolf [Fri, 4 Sep 2015 19:43:40 +0000 (21:43 +0200)]
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2015-09-04' into queue-block
Block patches from 2015-08-24 until 2015-09-04.
# gpg: Signature made Fri Sep 4 21:02:10 2015 CEST using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
* mreitz/tags/pull-block-for-kevin-2015-09-04:
quorum: validate vote threshold against num_children even if read-pattern is fifo
qcow2: reorder fields in Qcow2CachedTable to reduce padding
docs: document how to configure the qcow2 L2/refcount caches
qcow2: add option to clean unused cache entries after some time
qcow2: mark the memory as no longer needed after qcow2_cache_empty()
quorum: validate vote threshold against num_children even if read-pattern is fifo
We need to use threshold to check if too many write operation fails.
If threshold is larger than num children, we always get write error
event even if all write operations success.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Message-id: 55962F72.3060003@cn.fujitsu.com Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Alberto Garcia [Tue, 4 Aug 2015 12:14:42 +0000 (15:14 +0300)]
qcow2: reorder fields in Qcow2CachedTable to reduce padding
Changing the current ordering saves 8 bytes per cache entry in x86_64.
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 0bd55291211df3dfb514d0e7d2031dd5c4f9f807.1438690126.git.berto@igalia.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Alberto Garcia [Tue, 4 Aug 2015 12:14:41 +0000 (15:14 +0300)]
docs: document how to configure the qcow2 L2/refcount caches
QEMU has options to configure the size of the L2 and refcount
caches for the qcow2 format. However, choosing the right sizes for
a particular disk image is not a straightforward operation since
the ratio between the cache size and the allocated disk space is
not obvious and depends on the size of the cluster and the refcount
entries.
This document attempts to give an overview of both caches and how to
configure their sizes.
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 55de928e139b1ba3f3d40fe9c6c88f30b1f36410.1438690126.git.berto@igalia.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Alberto Garcia [Tue, 4 Aug 2015 12:14:40 +0000 (15:14 +0300)]
qcow2: add option to clean unused cache entries after some time
This adds a new 'cache-clean-interval' option that cleans all qcow2
cache entries that haven't been used in a certain interval, given in
seconds.
This allows setting a large L2 cache size so it can handle scenarios
with lots of I/O and at the same time use little memory during periods
of inactivity.
This feature currently relies on MADV_DONTNEED to free that memory, so
it is not useful in systems that don't follow that behavior.
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: a70d12da60433df9360ada648b3f34b8f6f354ce.1438690126.git.berto@igalia.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Alberto Garcia [Tue, 4 Aug 2015 12:14:39 +0000 (15:14 +0300)]
qcow2: mark the memory as no longer needed after qcow2_cache_empty()
After having emptied the cache, the data in the cache tables is no
longer useful, so we can tell the kernel that we are done with it. In
Linux this frees the resources associated with it.
The effect of this can be seen in the HMP commit operation: it moves
data from the top to the base image (and fills both caches), then it
empties the top image. At this point the data in that cache is no
longer needed so it's just wasting memory.
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 08538b098e1faf6c92496477cf9b47a20e5aacea.1438690126.git.berto@igalia.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 2 Sep 2015 18:52:27 +0000 (20:52 +0200)]
iotests: Do not suppress segfaults in bash tests
Currently, if a qemu/qemu-io/qemu-img/qemu-nbd invocation receives a
segmentation fault, that message is invisible in most cases since the
output is generally filtered and bash suppresses the segmentation fault
notice for any but the last element of a pipe.
Most of the time, the test will then fail anyway because of missing
output, but not necessarily (as happened with test 82 recently).
Fix this by making the corresponding environment variables point to
wrapper functions which execute the respective command in a subshell.
Giving options to qemu/qemu-io/qemu-img and path names with spaces were
broken for the Python tests; this patch "accidentally" fixes that.
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 2 Sep 2015 18:52:26 +0000 (20:52 +0200)]
iotests: Respect -nodefaults in tests 41 and 55
While -nodefaults is set in $QEMU_OPTIONS, this is currently (wrongly)
ignored for Python iotests. In order to be prepared for when this is
fixed, we should explicitly add an IDE CD-ROM drive instead of relying
on it being created automatically.
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 2 Sep 2015 18:52:25 +0000 (20:52 +0200)]
iotests: More options for VM.add_drive()
This patch allows specifying the interface to be used for the drive, and
makes specifying a path optional (if the path is None, the "file" option
will be omitted, thus creating an empty drive).
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This should not crash. This actually is tested by iotest 082, but not
caught due to the segmentation fault being silent (which is something
that needs to be fixed, too).
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 12 Aug 2015 15:33:31 +0000 (17:33 +0200)]
block/raw-posix: Use raw_normalize_devicepath()
The filename given to qemu_open() in block/raw-posix.c should generally
have been processed by raw_normalize_devicepath(); unless we are only
probing (in which case the caller often checks whether the file is a
block device or not, and this property will be changed by
raw_normalize_devicepath() on NetBSD) or it is about a deprecated device
(i.e. floppy).
Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Bo Tu [Fri, 3 Jul 2015 07:28:50 +0000 (15:28 +0800)]
qemu-iotests: s390x: fix test 130
The default device id of hard disk on the s390 platform is "virtio0"
which differs to the "ide0-hd0" for the x86 platform. Setting id in
the drive definition, ie:"qemu -drive id=testdisk", will be the same
on all platforms.
Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Bo Tu [Fri, 3 Jul 2015 07:28:49 +0000 (15:28 +0800)]
qemu-iotests: s390x: fix test 049, reject negative sizes in QemuOpts
when creating an image qemu-img enable us specifying the size of the
image using -o size=xx options. But when we specify an invalid size
such as a negtive size then different platform gives different result.
parse_option_size() function in util/qemu-option.c will be called to
parse the size, a cast was called in the function to cast the input
(saved as a double in the function) size to an unsigned int64 value,
when the input is a negtive value or exceeds the maximum of uint64, then
the result is undefined.
According to C99 6.3.1.4, the result of converting a floating point
number to an integer that cannot represent the (integer part of) number
is undefined. And sure enough the results are different on x86 and
s390.
C99 Language spec 6.3.1.4 Real floating and integers:
the result of this assignment/cast is undefined if the float is not
in the open interval (-1, U<type>_MAX+1).
Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Bo Tu [Fri, 3 Jul 2015 07:28:47 +0000 (15:28 +0800)]
qemu-iotests: disable default qemu devices for cross-platform compatibility
This patch fixes an io test suite issue that was introduced with the
commit c88930a6866e74953e931ae749781e98e486e5c8 'qemu-char: Permit only
a single "stdio" character device'. The option supresses the creation of
default devices such as the floopy and cdrom. Output files for test case
067, 071, 081 and 087 need to be updated to accommodate this change.
Use virtio-blk instead of virtio-blk-pci as the device driver for test
case 067. For virtio-blk-pci is the same with virtio-blk as device
driver but other platform such as s390 may not recognize the virtio-blk-pci.
The default devices differ across machines. As the qemu output often
contains these devices (or events for them, like opening a CD tray on
reset), the reference output currently is rather machine-specific.
All existing qemu tests explicitly configure the devices they're working
with, so just pass -nodefaults to qemu by default to disable the default
devices. Update the reference outputs accordingly.
Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Xiao Guang Chen <chenxg@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Bo Tu [Fri, 3 Jul 2015 07:28:46 +0000 (15:28 +0800)]
qemu-iotests: qemu machine type support
This patch adds qemu machine type support to the io test suite.
Based on the qemu default machine type and alias of the default machine
type the reference output file can now vary from the default to a
machine specific output file if necessary. When using a machine specific
reference file if the default machine has an alias then use the alias as the output
file name otherwise use the default machine name as the output file name.
Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Xiao Guang Chen <chenxg@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Peter Maydell [Fri, 4 Sep 2015 14:53:48 +0000 (15:53 +0100)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2015-09-04' into staging
qapi: Another round of fixes and cleanups
# gpg: Signature made Fri 04 Sep 2015 14:48:54 BST using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-qapi-2015-09-04: (33 commits)
qapi: Generators crash when --output-dir isn't given, fix
docs/qapi-code-gen.txt: Fix QAPI schema examples
qapi: Simplify error reporting for array types
qapi: Fix errors for non-string, non-dictionary members
tests/qapi-schema: Cover non-string, non-dictionary members
tests/qapi-schema: Cover two more syntax errors
qapi: Drop one of two "simple union must not have base" checks
qapi: Generated code cleanup
qapi-commands: Drop useless initialization
qapi-commands: Don't feed output of mcgen() to mcgen() again
qapi-commands: Inline gen_marshal_output_call()
qapi-commands: Fix gen_err_check(e) for e and e != 'local_err'
qapi: Command returning anonymous type doesn't work, outlaw
qapi: Fix to reject union command and event arguments
qapi-tests: New tests for union, alternate command arguments
tests/qapi-schema: Rename tests from data- to args-
tests/qapi-schema: Restore test case for flat union base bug
qapi: Document flaws in checking of names
qapi: Document shortcoming with union 'data' branch
qapi: Document that input visitor semantics are prone to leaks
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
check_type() first checks and peels off the array type, then checks
the element type. For two out of four error messages, it takes pains
to report errors for "array of T" instead of just T. Odd. Let's
examine the errors.
* Unknown element type, e.g.
tests/qapi-schema/args-array-unknown.json:
Member 'array' of 'data' for command 'oops' uses unknown type
'array of NoSuchType'
To make sense of this, you need to know that 'array of NoSuchType'
refers to '[NoSuchType]'. Easy enough. However, simply reporting
Member 'array' of 'data' for command 'oops' uses unknown type
'NoSuchType'
is at least as easy to understand.
* Element type's meta-type is inadmissible, e.g.
tests/qapi-schema/returns-whitelist.json:
'returns' for command 'no-way-this-will-get-whitelisted' cannot
use built-in type 'array of int'
'array of int' is technically not a built-in type, but that's
pedantry. However, simply reporting
'returns' for command 'no-way-this-will-get-whitelisted' cannot
use built-in type 'int'
avoids the issue, and is at least as easy to understand.
* The remaining two errors are unreachable, because the array checking
ensures that value is a string.
Thus, reporting some errors for "array of T" instead of just T works,
but doesn't really improve things. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
tests/qapi-schema: Cover non-string, non-dictionary members
We always report "should be a dictionary" then. This is misleading:
when allow_dict, it can be a dictionary or a type name string, else it
can only be a type name.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
qapi: Drop one of two "simple union must not have base" checks
The first check ensures the second one can't trigger. Drop the first
one, because the second one is in a more logical place, and emits a
nicer error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
qapi: Command returning anonymous type doesn't work, outlaw
Reproducer: with
{ 'command': 'user_def_cmd4', 'returns': { 'a': 'int' } }
added to qapi-schema-test.json, qapi-commands.py dies when it tries to
generate the command handler function
Traceback (most recent call last):
File "/work/armbru/qemu/scripts/qapi-commands.py", line 359, in <module>
ret = generate_command_decl(cmd['command'], arglist, ret_type) + "\n"
File "/work/armbru/qemu/scripts/qapi-commands.py", line 29, in generate_command_decl
ret_type=c_type(ret_type), name=c_name(name),
File "/work/armbru/qemu/scripts/qapi.py", line 927, in c_type
assert isinstance(value, str) and value != ""
AssertionError
because the return type doesn't exist.
Simply outlaw this usage, and drop or dumb down test cases accordingly.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
tests/qapi-schema: Rename tests from data- to args-
Since every schema entity has 'data', the data- prefix conveys no
information. These tests actually exercise commands. Only commands
have arguments, so change the prefix to to args-.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Eric Blake [Thu, 30 Jul 2015 23:07:17 +0000 (17:07 -0600)]
qapi: Document shortcoming with union 'data' branch
Add a FIXME to remind us to fully audit whether removing the
'void *data' branch of each qapi union type can be done safely.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1438297637-26789-1-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Thu, 30 Jul 2015 22:33:07 +0000 (16:33 -0600)]
qapi: Document that input visitor semantics are prone to leaks
Most functions that can return a pointer or set an Error ** value
are decent enough to guarantee a NULL return when reporting an error.
Not so with our generated qapi visitor functions. If the caller
is not careful to clean up partially-allocated objects on error,
then the caller suffers a memory leak.
Properly fixing it is probably complex enough to save for a later
day, so merely document it for now.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1438295587-19069-1-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
tests/qapi-schema: Document events with base don't work
When event FOO's 'data' is a struct with a base, we consider only the
struct's direct members, and ignore its base. The generated
qapi_event_send_foo() doesn't take arguments for base members.
No such events currently exist in the QMP schema.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
tests/qapi-schema: Document alternate's enum lacks visit function
We generate a declaration, but no definition.
The QMP schema has two: Qcow2OverlapChecks and BlockdevRef. Neither
visit_type_Qcow2OverlapChecksKind() nor visit_type_BlockdevRefKind()
is actually used.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
qapi-visit: Fix two name arguments passed to visitors
The generated code passes mangled schema names to visit_type_enum()
and union's visit_start_struct(). Fix it to pass the names
unadulterated, like we do everywhere else.
Only qapi-schema-test.json actually has names where this makes a
difference: enum __org.qemu_x-Enum, flat union __org.qemu_x-Union2,
simple union __org.qemu_x-Union1 and its implicit enum
__org.qemu_x-Union1Kind.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
qapi-visit: Fix generated code when schema has forward refs
The visit_type_implicit_FOO() are generated on demand, right before
their first use. Used by visit_type_STRUCT_fields() when STRUCT has
base FOO, and by visit_type_UNION() when flat UNION has member a FOO.
If the schema defines FOO after its first use as struct base or flat
union member, visit_type_implicit_FOO() calls
visit_type_implicit_FOO() before its definition, which doesn't
compile.
Rearrange qapi-schema-test.json to demonstrate the bug.
Fix by generating the necessary forward declaration.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Change to put all base members at the beginning, unadulterated. Not
only is this easier to understand, it also permits casting the flat
union to its base, if that should become useful.
We now generate:
struct UserDefFlatUnion
{
/* Members inherited from UserDefUnionBase: */
char *string;
EnumOne enum1;
/* Own members: */
union { /* union tag is @enum1 */
void *data;
UserDefA *value1;
UserDefB *value2;
UserDefB *value3;
};
};
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
qapi: Drop unused and useless parameters and variables
gen_sync_call()'s parameter indent is useless: gen_sync_call() uses it
only as optional argument for push_indent() and pop_indent(), their
default is four, and gen_sync_call()'s only caller passes four. Drop
the parameter.
gen_visitor_input_containers_decl()'s parameter obj is always
"QOBJECT(args)". Use that, and drop the parameter.
Drop unused parameters of gen_marshal_output(),
gen_marshal_input_decl(), generate_visit_struct_body(),
generate_visit_list(), generate_visit_enum(), generate_declaration(),
generate_enum_declaration(), generate_decl_enum().
Drop unused variables in generate_event_enum_lookup(),
generate_enum_lookup(), generate_visit_struct_fields(), check_event().
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
qapi-event: Clean up how name of enum QAPIEvent is made
Use c_name() instead of ad hoc code. Doesn't upcase the -p prefix,
which is an improvement in my book. Unbreaks prefix containing '.',
but other funny characters remain broken. To be fixed next.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Commit 05dfb26 added eatspace stripping to mcgen(). Move it to
cgen(), just in case somebody gets tempted to use cgen() directly
instead of via mcgen().
cgen() indents blank lines. No such lines get generated right now,
but fix it anyway.
We use triple-quoted strings for program text, like this:
'''
Program text
any number of lines
'''
Keeps the program text relatively readable, but puts an extra newline
at either end. mcgen() "fixes" that by dropping the first and last
line outright. Drop only the newlines.
This unmasks a bug in qapi-commands.py: four quotes instead of three.
Fix it up.
Output doesn't change
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Ting Wang [Fri, 26 Jun 2015 08:07:13 +0000 (16:07 +0800)]
hmp: add info iothreads command
Make "info iothreads" available on the HMP monitor.
For example, the results are as follows when executing qemu
command with "-object iothread,id=iothread-1 -object
iothread,id=iothread-2".
(qemu) info iothreads
iothread-1: thread_id=123
iothread-2: thread_id=456
Signed-off-by: Ting Wang <kathy.wangting@huawei.com>
Message-Id: <1435306033-58372-1-git-send-email-kathy.wangting@huawei.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Amos Jianjun Kong <kongjianjun@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add completion for the trace event names in the hmp trace-event
command.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1439548063-18410-1-git-send-email-dgilbert@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
projects / mirror_qemu.git / log