David Lamparter [Tue, 4 Oct 2022 16:44:36 +0000 (18:44 +0200)]
build, vtysh: extract vtysh commands from .xref
Rather than running selected source files through the preprocessor and a
bunch of perl regex'ing to get the list of all DEFUNs, use the data
collected in frr.xref.
This not only eliminates issues we've been having with preprocessor
failures due to nonexistent header files, but is also much faster.
Where extract.pl would take 5s, this now finishes in 0.2s. And since
this is a non-parallelizable build step towards the end of the build
(dependent on a lot of other things being done already), the speedup is
actually noticeable.
Also files containing CLI no longer need to be listed in `vtysh_scan`
since the .xref data covers everything. `#ifndef VTYSH_EXTRACT_PL`
checks are equally obsolete.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Stephen Worley [Fri, 21 Oct 2022 15:18:12 +0000 (11:18 -0400)]
bgpd: fix vni_str NULL check in evpn rt show run
Fix the vni_str NULL check for wildcard route-targets
in evpn show run. This will never be NULL if we add 1
here. Though it should also never be NULL since ":" should
always exist. Better to be safe than sorry.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Donald Sharp [Wed, 19 Oct 2022 16:57:28 +0000 (12:57 -0400)]
lib: Remove unnecessary comparison, for linked list
In the comparison function for a linked list code was
always checking against passed in NULL's. The comparison
function will never receive a NULL value for data from
the linklist.c code.
Donald Sharp [Wed, 19 Oct 2022 16:44:55 +0000 (12:44 -0400)]
zebra: Fix debug of filtering out prefix due to routemap
The debug for notification about a filtered prefix was
just printing the nexthop ifindex and vrf id. Not all
nexthops have this data. Just print out the actual nexthop
Sarita Patra [Tue, 11 Oct 2022 01:38:14 +0000 (18:38 -0700)]
pimd, pim6d: Don't configure link-local, Multicast, Unspecified address as RP
Problem:
=======
frr(config)# do show ipv6 pim interface
Interface State Address PIM Nbrs PIM DR FHR IfChannels
ens192 up fe80::250:56ff:feb7:3619 0 local 0 1
Configure ens192 interface link-local address as RP.
frr(config)# ipv6 pim rp fe80::250:56ff:feb7:3619
No Path to RP address specified: fe80::250:56ff:feb7:3619
frr(config)# do show ipv6 pim rp-info
RP address group/prefix-list OIF I am RP Source Group-Type
fe80::250:56ff:feb7:3619 ff00::/8 Unknown yes Static ASM
Fix:
===
RP should not be link-local, multicast and unspecified address.
Introduced common api pim_process_unicast_bsm_cmd,
pim_process_no_unicast_bsm_cmd which will process
both "[no] ip pim unicast-bsm" command and "[no] ipv6 pim
unicast-bsm" command.
Currently, the SID transposition algorithm implemented in bgpd handles
incorrectly the SRv6 locators with function length greater than 20 bits.
To prevent issues, we currently limit the function length to 20 bits.
This limit will be removed when the bgpd SID transposition is fixed.
According to RFC 8986, the SRv6 SID length cannot exceed 128 bits. This
commit ensures that the condition
`block_len + node_len + function_len + arg_len <= 128` is satisfied when
a new SRv6 locator is created.
This commit extends the `bgp_srv6l3vpn_to_bgp_vrf3` topotest by adding
two tests:
* prevent bgpd from exporting routes from a VRF to the VPN RIB
(`no sid vpn per-vrf export`);
* enable bgpd to export routes from a VRF to the VPN RIB
(`sid vpn per-vrf export auto`).
The command `sid vpn per-vrf export (1-255)|auto` can be used to export
IPv4 and IPv6 routes from a VRF to the VPN RIB using a single SRv6 SID
(End.DT46 behavior).
This commit implements the no form of the above command, which can be
used to disable the export of the IPv4/IPv6 routes:
`no sid vpn per-vrf export`.
This commit adds a new test case to the
test_zebra_seg6local_route topotest. The new test case performs two
operations:
* try to install a seg6local route with an End.DT46 action
* verify that the route is created correctly
In the current implementation of bgpd, SRv6 SIDs can be configured only
under the address-family. This enables bgpd to leak IPv6 routes using
an SRv6 End.DT6 behavior and IPv4 routes using an SRv6 End.DT4
behavior. It is not possible to leak both IPv6 and IPv4 routes using a
single SRv6 SID.
This commit adds a new CLI command
"sid vpn per-vrf export <sid_idx|auto>" that enables bgpd to leak both
IPv6 and IPv4 routes using a single SRv6 SID (End.DT46 behavior).
This commit adds the SRv6 locator's block length, node length and
argument length to the output of the command
"show segment-routing srv6 locator json"
zebra: add missing bits len to SRv6 locator detail
This commit adds SRv6 locator's block length, node length and argument
length to the output of the command
"show segment-routing srv6 locator NAME detail [json]".
zebra: add new CLI args "block-len" and "node-len"
In the current implementation, an SRv6 locator only supports the
following structure:
* node-len = 24
* block-len = prefix-len - 24
* function-len = <configurable>
* argument-len = 0
This commit adds two optional arguments to the locator_prefix CLI
command: "node-len" and "block-len". These arguments allows an user to
configure the block length and node length of a SRv6 locator according
to the following logic:
* the node-len + block-len = prefix-len constraint must always be
satisfied;
* if node-len and block-len are both omitted, they are calculated as in
the current implementation (for backward compatibility reasons)
* if node-len is omitted, its value is computed as
prefix-len - block-len
* if block-len is omitted, its value is computed as
prefix-len - node-len
Donald Sharp [Wed, 12 Oct 2022 20:05:23 +0000 (16:05 -0400)]
ospfd: Allow unnumbered and numbered addresses to co-exist better
When forming a neighbor relationship on an interface, ospf is
currently evaluating unnumbered as highest priority, without
any consideration for if you have /32's and non /32's on the
interface. Effectively if I have something like this:
int foo0
ip address 192.168.119.1/24
!
router ospf
network 0.0.0.0/0 area 0
!
ospf will form a neighbor on foo0 if it exists. Now
suppose someone does this:
int foo0
ip address 192.168.120.1/32
This will create the unnumbered interface on foo0 and
the peering will come down immediately.
The problem here is that the original designers of the unnumbered
code for ospf didn't envision end operators mixing and matching
addresses on an interface like this ( for perfectly legitimate
reasons I might add ).
So if ospf has both numbered and unnumbered let's match against
the numbered first and then unnumbered. This solves the problem
Fixes: #6823 Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Donald Sharp [Wed, 12 Oct 2022 18:53:21 +0000 (14:53 -0400)]
bgpd: Allow `network XXX` to work with bgp suppress-fib-pending
When bgp is using `bgp suppress-fib-pending` and the end
operator is using network statements, bgp was not sending
the network'ed prefix'es to it's peers. Fix this.
Also update the test cases for bgp_suppress_fib to test
this new corner case( I am sure that there are going to
be others that will need to be added ).
Fixes: #12112 Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Donald Sharp [Tue, 11 Oct 2022 17:21:03 +0000 (13:21 -0400)]
lib: Free some memory in scripting subsystem at shutdown
Pre:
staticd: showing active allocations in memory group libfrr
staticd: memstats: Scripting : 16 * (variably sized)
staticd: memstats: Hash : 2 * (variably sized)
staticd: memstats: Hash Bucket : 8 * 32
staticd: memstats: Hash Index : 1 * (variably sized)
staticd: memstats: Link List : 1 * 40
staticd: memstats: Link Node : 1 * 24
staticd: showing active allocations in memory group logging subsystem
staticd: memstats: log file target : 1 * 88
staticd: showing active allocations in memory group staticd
Post:
staticd: showing active allocations in memory group libfrr
staticd: showing active allocations in memory group logging subsystem
staticd: memstats: log file target : 1 * 88
staticd: showing active allocations in memory group staticd
projects / mirror_frr.git / log