Ilias Apalodimas [Tue, 19 Nov 2019 22:19:22 +0000 (00:19 +0200)]
Documentation: networking: add cpsw switchdev based driver documentation
A new cpsw dirver based on switchdev was added. Add documentation about
basic configuration and future features
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilias Apalodimas [Tue, 19 Nov 2019 22:19:20 +0000 (00:19 +0200)]
net: ethernet: ti: introduce cpsw switchdev based driver part 2 - switch
CPSW switchdev based driver which is operating in dual-emac mode by
default, thus working as 2 individual network interfaces. The Switch mode
can be enabled by configuring devlink driver parameter "switch_mode" to 1:
devlink dev param set platform/48484000.switch \
name switch_mode value 1 cmode runtime
This can be done regardless of the state of Port's netdevs - UP/DOWN, but
Port's netdev devices have to be UP before joining the bridge to avoid
overwriting of bridge configuration as CPSW switch driver completely
reloads its configuration when first Port changes its state to UP.
When the both interfaces joined the bridge - CPSW switch driver will start
marking packets with offload_fwd_mark flag unless "ale_bypass=0".
All configuration is implemented via switchdev API and notifiers.
Supported:
- SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS
- SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS: BR_MCAST_FLOOD
- SWITCHDEV_ATTR_ID_PORT_STP_STATE
- SWITCHDEV_OBJ_ID_PORT_VLAN
- SWITCHDEV_OBJ_ID_PORT_MDB
- SWITCHDEV_OBJ_ID_HOST_MDB
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilias Apalodimas [Tue, 19 Nov 2019 22:19:19 +0000 (00:19 +0200)]
net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac
Part 1:
Introduce basic CPSW dual_mac driver (cpsw_new.c) which is operating in
dual-emac mode by default, thus working as 2 individual network interfaces.
Main differences from legacy CPSW driver are:
- optimized promiscuous mode: The P0_UNI_FLOOD (both ports) is enabled in
addition to ALLMULTI (current port) instead of ALE_BYPASS. So, Ports in
promiscuous mode will keep possibility of mcast and vlan filtering, which
is provides significant benefits when ports are joined to the same bridge,
but without enabling "switch" mode, or to different bridges.
- learning disabled on ports as it make not too much sense for
segregated ports - no forwarding in HW.
- enabled basic support for devlink.
dt-bindings: net: ti: add new cpsw switch driver bindings
Add bindings for the new TI CPSW switch driver. Comparing to the legacy
bindings (net/cpsw.txt):
- ports definition follows DSA bindings (net/dsa/dsa.txt) and ports can be
marked as "disabled" if not physically wired.
- all deprecated properties dropped;
- all legacy propertiies dropped which represent constant HW cpapbilities
(cpdma_channels, ale_entries, bd_ram_size, mac_control, slaves,
active_slave)
- TI CPTS DT properties are reused as is, but grouped in "cpts" sub-node
- TI Davinci MDIO DT bindings are reused as is, because Davinci MDIO is
reused.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethernet: ti: cpsw: move set of common functions in cpsw_priv
As a preparatory patch to add support for a switchdev based cpsw driver,
move common functions to cpsw-priv.c so that they can be used across both
drivers.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethernet: ti: cpsw: resolve build deps of cpsw drivers
A following patches introduce new CPSW switchdev driver which uses common
code with legacy CPSW driver. This will introduce build dependency between
CPSW switchdev and CPSW legacy drivers related to for_each_slave() and
cpsw_slave_index() - they can be compiled both, but only one of them will
be not functional depending in Kconfig settings due to duffrences in Slave
Ports indexes calculation.
To fix this make for_each_slave() local (it's used now only by legacy CPSW
driver) and convert cpsw_slave_index() to be a function pointer which is
assigned in probe. Driver to probe is defined by DT.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilias Apalodimas [Tue, 19 Nov 2019 22:19:15 +0000 (00:19 +0200)]
net: ethernet: ti: ale: modify vlan/mdb api for switchdev
A following patch introduces switchdev functionality, so modify
ALE engine VLANs/MDBs API:
- cpsw_ale_del_mcast(): update so it will remove only selected ports from
mcast port_mask or delete whole mcast record if !port_mask
- cpsw_ale_del_vlan(): update so it will remove only selected ports from
all VLAN record's masks or delete whole VLAN record if !port_mask
- add cpsw_ale_vlan_add_modify() to add or modify existing VLAN record's
masks
- add cpsw_ale_set_unreg_mcast() for enabling unreg mcast on port VLANs
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethernet: ti: cpsw: allow untagged traffic on host port
Now untagged vlan traffic is not support on Host P0 port. This patch adds
in ALE context bitmap of VLANs for which Host P0 port bit set in Force
Untagged Packet Egress bitmask in VLANs ALE entries, and adds corresponding
check in VLAN incapsulation header parsing function cpsw_rx_vlan_encap().
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
nf_tables_offload: vlan matching support
The following patchset contains Netfilter support for vlan matching
offloads:
1) Constify nft_reg_load() as a preparation patch.
2) Restrict rule matching to ingress interface type ARPHRD_ETHER.
3) Add new vlan_tci field to flow_dissector_key_vlan structure,
to allow to set up vlan_id, vlan_dei and vlan_priority in one go.
4) C-VLAN matching support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
netfilter: nft_payload: add C-VLAN offload support
Match on h_vlan_encapsulated_proto and set up protocol dependency. Check
for protocol dependency before accessing the tci field. Allow to match
on the encapsulated ethertype too.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Match on ethertype and set up protocol dependency. Check for protocol
dependency before accessing the tci field. Allow to match on the
encapsulated ethertype too.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
netfilter: nf_tables_offload: allow ethernet interface type only
Hardware offload support at this stage assumes an ethernet device in
place. The flow dissector provides the intermediate representation to
express this selector, so extend it to allow to store the interface
type. Flower does not uses this, so skb_flow_dissect_meta() is not
extended to match on this new field.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 19 Nov 2019 09:39:11 +0000 (17:39 +0800)]
lwtunnel: add support for multiple geneve opts
geneve RFC (draft-ietf-nvo3-geneve-14) allows a geneve packet to carry
multiple geneve opts, so it's necessary for lwtunnel to support adding
multiple geneve opts in one lwtunnel route. But vxlan and erspan opts
are still only allowed to add one option.
With this patch, iproute2 could make it like:
# ip r a 1.1.1.0/24 encap ip id 1 geneve_opts 0:0:12121212,1:2:12121212 \
dst 10.1.0.2 dev geneve1
# ip r a 1.1.1.0/24 encap ip id 1 vxlan_opts 456 \
dst 10.1.0.2 dev erspan1
# ip r a 1.1.1.0/24 encap ip id 1 erspan_opts 1:123:0:0 \
dst 10.1.0.2 dev erspan1
Which are pretty much like cls_flower and act_tunnel_key.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 4846d5330daf ("cxgb4: add Tx and Rx path for ETHOFLD traffic") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 18 Nov 2019 18:16:57 +0000 (20:16 +0200)]
net: dsa: felix: Fix CPU port assignment when not last port
On the NXP LS1028A, there are 2 Ethernet links between the Felix switch
and the ENETC:
- eno2 <-> swp4, at 2.5G
- eno3 <-> swp5, at 1G
Only one of the above Ethernet port pairs can act as a DSA link for
tagging.
When adding initial support for the driver, it was tested only on the 1G
eno3 <-> swp5 interface, due to the necessity of using PHYLIB initially
(which treats fixed-link interfaces as emulated C22 PHYs, so it doesn't
support fixed-link speeds higher than 1G).
After making PHYLINK work, it appears that swp4 still can't act as CPU
port. So it looks like ocelot_set_cpu_port was being called for swp4,
but then it was called again for swp5, overwriting the CPU port assigned
in the DT.
It appears that when you call dsa_upstream_port for a port that is not
defined in the device tree (such as swp5 when using swp4 as CPU port),
its dp->cpu_dp pointer is not initialized by dsa_tree_setup_default_cpu,
and this trips up the following condition in dsa_upstream_port:
if (!cpu_dp)
return port;
So the moral of the story is: don't call dsa_upstream_port for a port
that is not defined in the device tree, and therefore its dsa_port
structure is not completely initialized (ds->num_ports is still 6).
Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 18 Nov 2019 11:48:35 +0000 (11:48 +0000)]
net: phy: dp83869: fix return of uninitialized variable ret
In the case where the call to phy_interface_is_rgmii returns zero
the variable ret is left uninitialized and this is returned at
the end of the function dp83869_configure_rgmii. Fix this by
returning 0 instead of the uninitialized value in ret.
Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 01db923e8377 ("net: phy: dp83869: Add TI dp83869 phy") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Mon, 18 Nov 2019 10:10:12 +0000 (18:10 +0800)]
lwtunnel: change to use nla_put_u8 for LWTUNNEL_IP_OPT_ERSPAN_VER
LWTUNNEL_IP_OPT_ERSPAN_VER is u8 type, and nla_put_u8 should have
been used instead of nla_put_u32(). This is a copy-paste error.
Fixes: b0a21810bd5e ("lwtunnel: add options setting and dumping for erspan") Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 19 Nov 2019 01:13:29 +0000 (17:13 -0800)]
Merge branch 'bnxt_en-Updates'
Michael Chan says:
====================
bnxt_en: Updates.
This series has the firmware interface update that changes the aRFS/ntuple
interface on 57500 chips. The 2nd patch adds a counter and improves
the hardware buffer error handling on the 57500 chips. The rest of the
series is mainly enhancements on error recovery and firmware reset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavan Chebbi [Mon, 18 Nov 2019 08:56:43 +0000 (03:56 -0500)]
bnxt_en: Abort waiting for firmware response if there is no heartbeat.
This is especially beneficial during the NVRAM related firmware
commands that have longer timeouts. If the BNXT_STATE_FW_FATAL_COND
flag gets set while waiting for firmware response, abort and return
error.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Mon, 18 Nov 2019 08:56:42 +0000 (03:56 -0500)]
bnxt_en: Add a warning message for driver initiated reset
During loss of heartbeat, log this warning message.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Mon, 18 Nov 2019 08:56:41 +0000 (03:56 -0500)]
bnxt_en: Return proper error code for non-existent NVM variable
For NVM params that are not supported in the current NVM
configuration, return the error as -EOPNOTSUPP.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Mon, 18 Nov 2019 08:56:40 +0000 (03:56 -0500)]
bnxt_en: Report health status update after reset is done
Report health status update to devlink health reporter, once
reset is completed.
Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Mon, 18 Nov 2019 08:56:39 +0000 (03:56 -0500)]
bnxt_en: Set MASTER flag during driver registration.
The Linux driver is capable of being the master function to handle
resets, so we set the flag to let firmware know. Some other
drivers, such as DPDK, is not capable and will not set the flag.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Mon, 18 Nov 2019 08:56:38 +0000 (03:56 -0500)]
bnxt_en: Extend ETHTOOL_RESET to hot reset driver.
If firmware supports hot reset, extend ETHTOOL_RESET to support
hot reset driver which does not require a driver reload after
ETHTOOL_RESET. The driver will go through the same coordinated
reset sequence as a firmware initiated fatal/non-fatal reset.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Mon, 18 Nov 2019 08:56:37 +0000 (03:56 -0500)]
bnxt_en: Increase firmware response timeout for coredump commands.
Use the larger HWRM_COREDUMP_TIMEOUT value for coredump related
data response from the firmware. These commands take longer than
normal commands.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 18 Nov 2019 08:56:36 +0000 (03:56 -0500)]
bnxt_en: Improve RX buffer error handling.
When hardware reports RX buffer errors, the latest 57500 chips do not
require reset. The packet is discarded by the hardware and the
ring will continue to operate.
Also, add an rx_buf_errors counter for this type of error. It can help
the user to identify if the aggregation ring is too small.
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
selftests: Add ethtool and scale tests
This patch set adds generic ethtool tests and a mlxsw-specific router
scale test for Spectrum-2.
Patches #1-#2 from Danielle add the router scale test for Spectrum-2. It
re-uses the same test as Spectrum-1, but it is invoked with a different
scale, according to what it is queried from devlink-resource.
Patches #3-#5 from Amit are a re-work of the ethtool tests that were
posted in the past [1]. Patches #3-#4 add the necessary library
routines, whereas patch #5 adds the test itself. The test checks both
good and bad flows with autoneg on and off. The test plan it detailed in
the commit message.
Last time Andrew and Florian (copied) provided very useful feedback that
is incorporated in this set. Namely:
* Parse the value of the different link modes from
/usr/include/linux/ethtool.h
* Differentiate between supported and advertised speeds and use the
latter in autoneg tests
* Make the test generic and move it to net/forwarding/ instead of being
mlxsw-specific
Amit Cohen [Mon, 18 Nov 2019 07:50:02 +0000 (09:50 +0200)]
selftests: forwarding: Add speed and auto-negotiation test
Check configurations and packets transference with different variations
of autoneg and speed.
Test plan:
1. Test force of same speed with autoneg off
2. Test force of different speeds with autoneg off (should fail)
3. One side is autoneg on and other side sets force of common speeds
4. One side is autoneg on and other side only advertises a subset of the
common speeds (one speed of the subset)
5. One side is autoneg on and other side only advertises a subset of the
common speeds. Check that highest speed is negotiated
6. Test autoneg on, but each side advertises different speeds (should
fail)
Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Mon, 18 Nov 2019 07:50:00 +0000 (09:50 +0200)]
selftests: forwarding: Add ethtool_lib.sh
Functions:
1. speeds_arr_get
The function returns an array of speed values from
/usr/include/linux/ethtool.h The array looks as follows:
[10baseT/Half] = 0,
[10baseT/Full] = 1,
...
2. ethtool_set:
params: cmd
The function runs ethtool by cmd (ethtool -s cmd) and checks if
there was an error in configuration
3. dev_speeds_get:
params: dev, with_mode (0 or 1), adver (0 or 1)
return value: Array of supported/Advertised link modes
with/without mode
Danielle Ratson [Mon, 18 Nov 2019 07:49:59 +0000 (09:49 +0200)]
selftests: mlxsw: Check devlink device before running test
The scale test for Spectrum-2 should only be invoked for Spectrum-2.
Skip the test otherwise.
Signed-off-by: Danielle Ratson <danieller@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Mon, 18 Nov 2019 07:49:58 +0000 (09:49 +0200)]
selftests: mlxsw: Add router scale test for Spectrum-2
Same as for Spectrum-1, test the ability to add the maximum number of
routes possible to the switch.
Invoke the test from the 'resource_scale' wrapper script.
Signed-off-by: Danielle Ratson <danieller@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
page_pool: followup changes to restore tracepoint features
This patchset is a followup to Jonathan patch, that do not release
pool until inflight == 0. That changed page_pool to be responsible for
its own delayed destruction instead of relying on xdp memory model.
As the page_pool maintainer, I'm promoting the use of tracepoint to
troubleshoot and help driver developers verify correctness when
converting at driver to use page_pool. The role of xdp:mem_disconnect
have changed, which broke my bpftrace tools for shutdown verification.
With these changes, the same capabilities are regained.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
page_pool: extend tracepoint to also include the page PFN
The MM tracepoint for page free (called kmem:mm_page_free) doesn't provide
the page pointer directly, instead it provides the PFN (Page Frame Number).
This is annoying when writing a page_pool leak detector in BPF.
This patch change page_pool tracepoints to also provide the PFN.
The page pointer is still provided to allow other kinds of
troubleshooting from BPF.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
page_pool: add destroy attempts counter and rename tracepoint
When Jonathan change the page_pool to become responsible to its
own shutdown via deferred work queue, then the disconnect_cnt
counter was removed from xdp memory model tracepoint.
This patch change the page_pool_inflight tracepoint name to
page_pool_release, because it reflects the new responsability
better. And it reintroduces a counter that reflect the number of
times page_pool_release have been tried.
The counter is also used by the code, to only empty the alloc
cache once. With a stuck work queue running every second and
counter being 64-bit, it will overrun in approx 584 billion
years. For comparison, Earth lifetime expectancy is 7.5 billion
years, before the Sun will engulf, and destroy, the Earth.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
xdp: remove memory poison on free for struct xdp_mem_allocator
When looking at the details I realised that the memory poison in
__xdp_mem_allocator_rcu_free doesn't make sense. This is because the
SLUB allocator uses the first 16 bytes (on 64 bit), for its freelist,
which overlap with members in struct xdp_mem_allocator, that were
updated. Thus, SLUB already does the "poisoning" for us.
I still believe that poisoning memory make sense in other cases.
Kernel have gained different use-after-free detection mechanism, but
enabling those is associated with a huge overhead. Experience is that
debugging facilities can change the timing so much, that that a race
condition will not be provoked when enabled. Thus, I'm still in favour
of poisoning memory where it makes sense.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
We currently match clause 45 PHYs using any ID read from a MMD marked
as present in the "Devices in package" registers 5 and 6. However,
this is incorrect. 45.2 says:
"The definition of the term package is vendor specific and could be
a chip, module, or other similar entity."
so a package could be more or less than the whole PHY - a PHY could be
made up of several modules instantiated onto a single chip such as the
Marvell 88x3310, or some of the MMDs could be disabled according to
chip configuration, such as the Broadcom 84881.
In the case of Broadcom 84881, the "Devices in package" registers
contain 0xc000009b, meaning that there is a PHYXS present in the
package, but all registers in MMD 4 return 0xffff. This leads to our
matching code incorrectly binding this PHY to one of our generic PHY
drivers.
This patch changes the way we determine whether to attempt to match a
MMD identifier, or use it to request a module - if the identifier is
all-ones, then we skip over it. When reading the identifiers, we
initialise phydev->c45_ids.device_ids to all-ones, only reading the
device ID if the "Devices in package" registers indicates we should.
This avoids the generic drivers incorrectly matching on a PHY ID of
0xffffffff.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 19 Nov 2019 00:56:13 +0000 (16:56 -0800)]
Merge branch 'Add-support-for-SFPs-behind-PHYs'
Russell King says:
====================
Add support for SFPs behind PHYs
This series adds partial support for SFP cages connected to PHYs,
specifically optical SFPs.
We add core infrastructure to phylib for this, and arrange for
minimal code in the PHY driver - currently, this is code to verify
that the module is one that we can support for Marvell 10G PHYs.
v2: add yaml binding patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Fri, 15 Nov 2019 19:56:56 +0000 (19:56 +0000)]
net: phy: marvell10g: add SFP+ support
Add support for SFP+ cages to the Marvell 10G PHY driver. This is
slightly complicated by the way phylib works in that we need to use
a multi-step process to attach the SFP bus, and we also need to track
the phylink state machine to know when the module's transmit disable
signal should change state.
With appropriate DT changes, this allows the SFP+ canges on the
Macchiatobin platform to be functional.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Fri, 15 Nov 2019 19:56:51 +0000 (19:56 +0000)]
net: phy: add core phylib sfp support
Add core phylib help for supporting SFP sockets on PHYs. This provides
a mechanism to inform the SFP layer about PHY up/down events, and also
unregister the SFP bus when the PHY is going away.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Fri, 15 Nov 2019 19:56:46 +0000 (19:56 +0000)]
dt-bindings: net: add ethernet controller and phy sfp property
Document the missing sfp property for ethernet controllers (which
has existed for some time) which is being extended to ethernet PHYs.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 17 Nov 2019 02:14:32 +0000 (18:14 -0800)]
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This reverts a number of changes to the khwrng thread which feeds the
kernel random number pool from hwrng drivers. They were trying to fix
issues with suspend-and-resume but ended up causing regressions"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
Revert "hwrng: core - Freeze khwrng thread during suspend"
Herbert Xu [Sun, 17 Nov 2019 00:48:17 +0000 (08:48 +0800)]
Revert "hwrng: core - Freeze khwrng thread during suspend"
This reverts commit 03a3bb7ae631 ("hwrng: core - Freeze khwrng
thread during suspend"), ff296293b353 ("random: Support freezable
kthreads in add_hwgenerator_randomness()") and 59b569480dc8 ("random:
Use wait_event_freezable() in add_hwgenerator_randomness()").
These patches introduced regressions and we need more time to
get them ready for mainline.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1) Fix memory leak in xfrm_state code, from Steffen Klassert.
2) Fix races between devlink reload operations and device
setup/cleanup, from Jiri Pirko.
3) Null deref in NFC code, from Stephan Gerhold.
4) Refcount fixes in SMC, from Ursula Braun.
5) Memory leak in slcan open error paths, from Jouni Hogander.
6) Fix ETS bandwidth validation in hns3, from Yonglong Liu.
7) Info leak on short USB request answers in ax88172a driver, from
Oliver Neukum.
8) Release mem region properly in ep93xx_eth, from Chuhong Yuan.
9) PTP config timestamp flags validation, from Richard Cochran.
10) Dangling pointers after SKB data realloc in seg6, from Andrea Mayer.
11) Missing free_netdev() in gemini driver, from Chuhong Yuan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
ipmr: Fix skb headroom in ipmr_get_route().
net: hns3: cleanup of stray struct hns3_link_mode_mapping
net/smc: fix fastopen for non-blocking connect()
rds: ib: update WR sizes when bringing up connection
net: gemini: add missed free_netdev
net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid
seg6: fix skb transport_header after decap_and_validate()
seg6: fix srh pointer in get_srh()
net: stmmac: Use the correct style for SPDX License Identifier
octeontx2-af: Use the correct style for SPDX License Identifier
ptp: Extend the test program to check the external time stamp flags.
mlx5: Reject requests to enable time stamping on both edges.
igb: Reject requests that fail to enable time stamping on both edges.
dp83640: Reject requests to enable time stamping on both edges.
mv88e6xxx: Reject requests to enable time stamping on both edges.
ptp: Introduce strict checking of external time stamp options.
renesas: reject unsupported external timestamp flags
mlx5: reject unsupported external timestamp flags
igb: reject unsupported external timestamp flags
dp83640: reject unsupported external timestamp flags
...
Fixes: 75a1ccfe6c72 ("mscc.c: Add support for additional VSC PHYs") CC: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 16 Nov 2019 01:55:54 +0000 (17:55 -0800)]
selftests: net: avoid ptl lock contention in tcp_mmap
tcp_mmap is used as a reference program for TCP rx zerocopy,
so it is important to point out some potential issues.
If multiple threads are concurrently using getsockopt(...
TCP_ZEROCOPY_RECEIVE), there is a chance the low-level mm
functions compete on shared ptl lock, if vma are arbitrary placed.
Instead of letting the mm layer place the chunks back to back,
this patch enforces an alignment so that each thread uses
a different ptl lock.
Performance measured on a 100 Gbit NIC, with 8 tcp_mmap clients
launched at the same time :
$ for f in {1..8}; do ./tcp_mmap -H 2002:a05:6608:290:: & done
In the following run, we reproduce the old behavior by requesting no alignment :
$ tcp_mmap -sz -C $((128*1024)) -a 4096
received 32768 MB (100 % mmap'ed) in 9.69532 s, 28.3516 Gbit
cpu usage user:0.08634 sys:3.86258, 120.511 usec per MB, 171839 c-switches
received 32768 MB (100 % mmap'ed) in 25.4719 s, 10.7914 Gbit
cpu usage user:0.055268 sys:21.5633, 659.745 usec per MB, 9065 c-switches
received 32768 MB (100 % mmap'ed) in 28.5419 s, 9.63069 Gbit
cpu usage user:0.057401 sys:23.8761, 730.392 usec per MB, 14987 c-switches
received 32768 MB (100 % mmap'ed) in 28.655 s, 9.59268 Gbit
cpu usage user:0.059689 sys:23.8087, 728.406 usec per MB, 18509 c-switches
received 32768 MB (100 % mmap'ed) in 28.7808 s, 9.55074 Gbit
cpu usage user:0.066042 sys:23.4632, 718.056 usec per MB, 24702 c-switches
received 32768 MB (100 % mmap'ed) in 28.8259 s, 9.5358 Gbit
cpu usage user:0.056547 sys:23.6628, 723.858 usec per MB, 23518 c-switches
received 32768 MB (100 % mmap'ed) in 28.8808 s, 9.51767 Gbit
cpu usage user:0.059357 sys:23.8515, 729.703 usec per MB, 14691 c-switches
received 32768 MB (100 % mmap'ed) in 28.8879 s, 9.51534 Gbit
cpu usage user:0.047115 sys:23.7349, 725.769 usec per MB, 21773 c-switches
New behavior (automatic alignment based on Hugepagesize),
we can see the system overhead being dramatically reduced.
$ tcp_mmap -sz -C $((128*1024))
received 32768 MB (100 % mmap'ed) in 13.5339 s, 20.3103 Gbit
cpu usage user:0.122644 sys:3.4125, 107.884 usec per MB, 168567 c-switches
received 32768 MB (100 % mmap'ed) in 16.0335 s, 17.1439 Gbit
cpu usage user:0.132428 sys:3.55752, 112.608 usec per MB, 188557 c-switches
received 32768 MB (100 % mmap'ed) in 17.5506 s, 15.6621 Gbit
cpu usage user:0.155405 sys:3.24889, 103.891 usec per MB, 226652 c-switches
received 32768 MB (100 % mmap'ed) in 19.1924 s, 14.3222 Gbit
cpu usage user:0.135352 sys:3.35583, 106.542 usec per MB, 207404 c-switches
received 32768 MB (100 % mmap'ed) in 22.3649 s, 12.2906 Gbit
cpu usage user:0.142429 sys:3.53187, 112.131 usec per MB, 250225 c-switches
received 32768 MB (100 % mmap'ed) in 22.5336 s, 12.1986 Gbit
cpu usage user:0.140654 sys:3.61971, 114.757 usec per MB, 253754 c-switches
received 32768 MB (100 % mmap'ed) in 22.5483 s, 12.1906 Gbit
cpu usage user:0.134035 sys:3.55952, 112.718 usec per MB, 252997 c-switches
received 32768 MB (100 % mmap'ed) in 22.6442 s, 12.139 Gbit
cpu usage user:0.126173 sys:3.71251, 117.147 usec per MB, 253728 c-switches
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Arjun Roy <arjunroy@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Fri, 15 Nov 2019 21:38:25 +0000 (22:38 +0100)]
r8169: load firmware for RTL8168fp/RTL8117
Load Realtek-provided firmware for RTL8168fp/RTL8117. Unlike the
firmware for other chip versions which is for the PHY, firmware for
RTL8168fp/RTL8117 is for the MAC.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Fri, 15 Nov 2019 20:35:22 +0000 (21:35 +0100)]
r8169: improve conditional firmware loading for RTL8168d
Using constant MII_EXPANSION is misleading here because register 0x06
has a different meaning on page 0x0005. Here a proprietary PHY
parameter is read by writing the parameter id to register 0x05 on page
0x0005, followed by reading the parameter value from register 0x06.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Fri, 15 Nov 2019 20:05:45 +0000 (20:05 +0000)]
net: phylink: update to use phy_support_asym_pause()
Use phy_support_asym_pause() rather than open-coding it.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Fri, 15 Nov 2019 17:29:52 +0000 (18:29 +0100)]
ipmr: Fix skb headroom in ipmr_get_route().
In route.c, inet_rtm_getroute_build_skb() creates an skb with no
headroom. This skb is then used by inet_rtm_getroute() which may pass
it to rt_fill_info() and, from there, to ipmr_get_route(). The later
might try to reuse this skb by cloning it and prepending an IPv4
header. But since the original skb has no headroom, skb_push() triggers
skb_under_panic():
Actually the original skb used to have enough headroom, but the
reserve_skb() call was lost with the introduction of
inet_rtm_getroute_build_skb() by commit 404eb77ea766 ("ipv4: support
sport, dport and ip_proto in RTM_GETROUTE").
We could reserve some headroom again in inet_rtm_getroute_build_skb(),
but this function shouldn't be responsible for handling the special
case of ipmr_get_route(). Let's handle that directly in
ipmr_get_route() by calling skb_realloc_headroom() instead of
skb_clone().
Fixes: 404eb77ea766 ("ipv4: support sport, dport and ip_proto in RTM_GETROUTE") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Fri, 15 Nov 2019 11:39:30 +0000 (12:39 +0100)]
net/smc: fix fastopen for non-blocking connect()
FASTOPEN does not work with SMC-sockets. Since SMC allows fallback to
TCP native during connection start, the FASTOPEN setsockopts trigger
this fallback, if the SMC-socket is still in state SMC_INIT.
But if a FASTOPEN setsockopt is called after a non-blocking connect(),
this is broken, and fallback does not make sense.
This change complements
commit cd2063604ea6 ("net/smc: avoid fallback in case of non-blocking connect")
and fixes the syzbot reported problem "WARNING in smc_unhash_sk".
Reported-by: syzbot+8488cc4cf1c9e09b8b86@syzkaller.appspotmail.com Fixes: e1bbdd570474 ("net/smc: reduce sock_put() for fallback sockets") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Matteo Croce [Fri, 15 Nov 2019 11:10:37 +0000 (12:10 +0100)]
bonding: symmetric ICMP transmit
A bonding with layer2+3 or layer3+4 hashing uses the IP addresses and the ports
to balance packets between slaves. With some network errors, we receive an ICMP
error packet by the remote host or a router. If sent by a router, the source IP
can differ from the remote host one. Additionally the ICMP protocol has no port
numbers, so a layer3+4 bonding will get a different hash than the previous one.
These two conditions could let the packet go through a different interface than
the other packets of the same flow:
# tcpdump -qltnni veth0 |sed 's/^/0: /' &
# tcpdump -qltnni veth1 |sed 's/^/1: /' &
# hping3 -2 192.168.0.2 -p 9
0: IP 192.168.0.1.2251 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
1: IP 192.168.0.1.2252 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
1: IP 192.168.0.1.2253 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
0: IP 192.168.0.1.2254 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
An ICMP error packet contains the header of the packet which caused the network
error, so inspect it and match the flow against it, so we can send the ICMP via
the same interface of the previous packet in the flow.
Move the IP and port dissect code into a generic function bond_flow_ip() and if
we are dissecting an ICMP error packet, call it again with the adjusted offset.
# hping3 -2 192.168.0.2 -p 9
1: IP 192.168.0.1.1224 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
1: IP 192.168.0.1.1225 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
0: IP 192.168.0.1.1226 > 192.168.0.2.9: UDP, length 0
0: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
0: IP 192.168.0.1.1227 > 192.168.0.2.9: UDP, length 0
0: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Fri, 15 Nov 2019 10:11:15 +0000 (11:11 +0100)]
net: mscc: ocelot: omit error check from of_get_phy_mode
The commit 0c65b2b90d13c ("net: of_get_phy_mode: Change API to solve
int/unit warnings") updated the function of_get_phy_mode declaration.
Now it returns an error code and in case the node doesn't contain the
property 'phy-mode' or 'phy-connection-type' it returns -EINVAL and would
set the phy_interface_t to PHY_INTERFACE_MODE_NA.
Ocelot VSC7514 has 4 internal phys which have the phy interface
PHY_INTERFACE_MODE_NA. So because of_get_phy_mode would assign
PHY_INTERFACE_MODE_NA to phy_mode when there is an error, there is no need
to add the error check.
Updates for v2:
- drop error check because of_get_phy_mode already assigns phy_interface
to PHY_INTERFACE_MODE in case of error.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: core: allow fast GRO for skbs with Ethernet header in head
Commit 78d3fd0b7de8 ("gro: Only use skb_gro_header for completely
non-linear packets") back in May'09 (v2.6.31-rc1) has changed the
original condition '!skb_headlen(skb)' to
'skb->mac_header == skb->tail' in gro_reset_offset() saying: "Since
the drivers that need this optimisation all provide completely
non-linear packets" (note that this condition has become the current
'skb_mac_header(skb) == skb_tail_pointer(skb)' later with commmit ced14f6804a9 ("net: Correct comparisons and calculations using
skb->tail and skb-transport_header") without any functional changes).
For now, we have the following rough statistics for v5.4-rc7:
1) napi_gro_frags: 14
2) napi_gro_receive with skb->head containing (most of) payload: 83
3) napi_gro_receive with skb->head containing all the headers: 20
4) napi_gro_receive with skb->head containing only Ethernet header: 2
With the current condition, fast GRO with the usage of
NAPI_GRO_CB(skb)->frag0 is available only in the [1] case.
Packets pushed by [2] and [3] go through the 'slow' path, but
it's not a problem for them as they already contain all the needed
headers in skb->head, so pskb_may_pull() only moves skb->data.
The layout of skbs in the fourth [4] case at the moment of
dev_gro_receive() is identical to skbs that have come through [1],
as napi_frags_skb() pulls Ethernet header to skb->head. The only
difference is that the mentioned condition is always false for them,
because skb_put() and friends irreversibly alter the tail pointer.
They also go through the 'slow' path, but now every single
pskb_may_pull() in every single .gro_receive() will call the *really*
slow __pskb_pull_tail() to pull headers to head. This significantly
decreases the overall performance for no visible reasons.
The only two users of method [4] is:
* drivers/staging/qlge
* drivers/net/wireless/iwlwifi (all three variants: dvm, mvm, mvm-mq)
Note that in case with wireless drivers we can't use [1]
(napi_gro_frags()) at least for now and mac80211 stack always
performs pushes and pulls anyways, so performance hit is inavoidable.
At the moment of v2.6.31 the mentioned change was necessary (that's
why I don't add the "Fixes:" tag), but it became obsolete since
skb_gro_mac_header() has gone in commit a50e233c50db ("net-gro:
restore frag0 optimization"), so we can simply revert the condition
in gro_reset_offset() to allow skbs from [4] go through the 'fast'
path just like in case [1].
This was tested on a 600 MHz MIPS CPU and a custom driver and this
patch gave boosts up to 40 Mbps to method [4] in both directions
comparing to net-next, which made overall performance relatively
close to [1] (without it, [4] is the slowest).
v2:
- Add more references and explanations to commit message
- Fix some typos ibid
- No functional changes
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
Dag Moxnes [Fri, 15 Nov 2019 08:56:01 +0000 (09:56 +0100)]
rds: ib: update WR sizes when bringing up connection
Currently WR sizes are updated from rds_ib_sysctl_max_send_wr and
rds_ib_sysctl_max_recv_wr when a connection is shut down. As a result,
a connection being down while rds_ib_sysctl_max_send_wr or
rds_ib_sysctl_max_recv_wr are updated, will not update the sizes when
it comes back up.
Move resizing of WRs to rds_ib_setup_qp so that connections will be setup
with the most current WR sizes.
Signed-off-by: Dag Moxnes <dag.moxnes@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Chuhong Yuan [Fri, 15 Nov 2019 06:24:54 +0000 (14:24 +0800)]
net: gemini: add missed free_netdev
This driver forgets to free allocated netdev in remove like
what is done in probe failure.
Add the free to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 16 Nov 2019 20:50:57 +0000 (12:50 -0800)]
Merge branch 'bnx2x-Remove-function-casts'
Kees Cook says:
====================
bnx2x: Remove function casts
In order to make the entire kernel usable under Clang's Control Flow
Integrity protections, function prototype casts need to be avoided
because this will trip CFI checks at runtime (i.e. a mismatch between
the caller's expected function prototype and the destination function's
prototype). Many of these cases can be found with -Wcast-function-type,
which found that bnx2x had a bunch of needless (or at least confusing)
function casts. This series removes them all.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Fri, 15 Nov 2019 05:07:15 +0000 (21:07 -0800)]
bnx2x: Remove hw_reset_t function casts
All .rw_reset callbacks except bnx2x_84833_hw_reset_phy() use a
void return type. No callers of .hw_reset check a return value and
bnx2x_84833_hw_reset_phy() unconditionally returns 0. Remove all
hw_reset_t casts and fix the return type to void.
Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Fri, 15 Nov 2019 05:07:14 +0000 (21:07 -0800)]
bnx2x: Remove format_fw_ver_t function casts
The return values for format_fw_ver_t callbacks are supposed to be
"int", not "u8". Ultimately, the top-level caller doesn't actually check
the return value at all, but just clean this all up anyway and fix the
prototypes so that casts are no longer needed.
Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Fri, 15 Nov 2019 05:07:12 +0000 (21:07 -0800)]
bnx2x: Remove read_status_t function casts
The function casts for .read_status callbacks end up casting some int
return values to u8. This seems to be bug-prone (-EINVAL being returned
into something that appears to be true/false), but fixing the function
prototypes doesn't change the existing behavior. Fix the return values
to remove the casts.
Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Fri, 15 Nov 2019 05:07:11 +0000 (21:07 -0800)]
bnx2x: Drop redundant callback function casts
NULL is already "void *" so it will auto-cast in assignments and
initializers. Additionally, all the callbacks for .link_reset,
.config_loopback, .set_link_led, and .phy_specific_func are already
correct. No casting is needed for these, so remove them.
Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Po Liu [Fri, 15 Nov 2019 03:33:41 +0000 (03:33 +0000)]
enetc: update TSN Qbv PSPEED set according to adjust link speed
ENETC has a register PSPEED to indicate the link speed of hardware.
It is need to update accordingly. PSPEED field needs to be updated
with the port speed for QBV scheduling purposes. Or else there is
chance for gate slot not free by frame taking the MAC if PSPEED and
phy speed not match. So update PSPEED when link adjust. This is
implement by the adjust_link.
Signed-off-by: Po Liu <Po.Liu@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Po Liu [Fri, 15 Nov 2019 03:33:33 +0000 (03:33 +0000)]
enetc: Configure the Time-Aware Scheduler via tc-taprio offload
ENETC supports in hardware for time-based egress shaping according
to IEEE 802.1Qbv. This patch implement the Qbv enablement by the
hardware offload method qdisc tc-taprio method.
Also update cbdr writeback to up level since control bd ring may
writeback data to control bd ring.
Signed-off-by: Po Liu <Po.Liu@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Thu, 14 Nov 2019 22:13:00 +0000 (14:13 -0800)]
page_pool: do not release pool until inflight == 0.
The page pool keeps track of the number of pages in flight, and
it isn't safe to remove the pool until all pages are returned.
Disallow removing the pool until all pages are back, so the pool
is always available for page producers.
Make the page pool responsible for its own delayed destruction
instead of relying on XDP, so the page pool can be used without
the xdp memory model.
When all pages are returned, free the pool and notify xdp if the
pool is registered with the xdp memory system. Have the callback
perform a table walk since some drivers (cpsw) may share the pool
among multiple xdp_rxq_info.
Note that the increment of pages_state_release_cnt may result in
inflight == 0, resulting in the pool being released.
Fixes: d956a048cd3f ("xdp: force mem allocator removal and periodic warning") Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
last part of termination improvements
Patches 1 and 2 finish the set of termination patches, introducing
a reboot handler that terminates all link groups. Patch 3 adds an
rcu_barrier before the module is unloaded, and patch 4 is cleanup.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Sat, 16 Nov 2019 16:47:32 +0000 (17:47 +0100)]
net/smc: remove unused constant
Constant SMC_CLOSE_WAIT_LISTEN_CLCSOCK_TIME is defined, but since
commit 3d502067599f ("net/smc: simplify wait when closing listen socket")
no longer used. Remove it.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Sat, 16 Nov 2019 16:47:31 +0000 (17:47 +0100)]
net/smc: use rcu_barrier() on module unload
Add rcu_barrier() to make sure no RCU readers or callbacks are
pending when the module is unloaded.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Sat, 16 Nov 2019 16:47:30 +0000 (17:47 +0100)]
net/smc: guarantee removal of link groups in reboot
When rebooting it should be guaranteed all link groups are cleaned
up and freed.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Sat, 16 Nov 2019 16:47:29 +0000 (17:47 +0100)]
net/smc: introduce bookkeeping of SMCR link groups
If the smc module is unloaded return control from exit routine only,
if all link groups are freed.
If an IB device is thrown away return control from device removal only,
if all link groups belonging to this device are freed.
Counters for the total number of SMCR link groups and for the total
number of SMCR links per IB device are introduced. smc module unloading
continues only if the total number of SMCR link groups is zero. IB device
removal continues only it the total number of SMCR links per IB device
has decreased to zero.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sat, 16 Nov 2019 16:08:25 +0000 (18:08 +0200)]
net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid
This sequence of operations:
ip link set dev br0 type bridge vlan_filtering 1
bridge vlan del dev swp2 vid 1
ip link set dev br0 type bridge vlan_filtering 1
ip link set dev br0 type bridge vlan_filtering 0
apparently fails with the message:
[ 31.305716] sja1105 spi0.1: Reset switch and programmed static config. Reason: VLAN filtering
[ 31.322161] sja1105 spi0.1: Couldn't determine PVID attributes (pvid 0)
[ 31.328939] sja1105 spi0.1: Failed to setup VLAN tagging for port 1: -2
[ 31.335599] ------------[ cut here ]------------
[ 31.340215] WARNING: CPU: 1 PID: 194 at net/switchdev/switchdev.c:157 switchdev_port_attr_set_now+0x9c/0xa4
[ 31.349981] br0: Commit of attribute (id=6) failed.
[ 31.354890] Modules linked in:
[ 31.357942] CPU: 1 PID: 194 Comm: ip Not tainted 5.4.0-rc6-01792-gf4f632e07665-dirty #2062
[ 31.366167] Hardware name: Freescale LS1021A
[ 31.370437] [<c03144dc>] (unwind_backtrace) from [<c030e184>] (show_stack+0x10/0x14)
[ 31.378153] [<c030e184>] (show_stack) from [<c11d1c1c>] (dump_stack+0xe0/0x10c)
[ 31.385437] [<c11d1c1c>] (dump_stack) from [<c034c730>] (__warn+0xf4/0x10c)
[ 31.392373] [<c034c730>] (__warn) from [<c034c7bc>] (warn_slowpath_fmt+0x74/0xb8)
[ 31.399827] [<c034c7bc>] (warn_slowpath_fmt) from [<c11ca204>] (switchdev_port_attr_set_now+0x9c/0xa4)
[ 31.409097] [<c11ca204>] (switchdev_port_attr_set_now) from [<c117036c>] (__br_vlan_filter_toggle+0x6c/0x118)
[ 31.418971] [<c117036c>] (__br_vlan_filter_toggle) from [<c115d010>] (br_changelink+0xf8/0x518)
[ 31.427637] [<c115d010>] (br_changelink) from [<c0f8e9ec>] (__rtnl_newlink+0x3f4/0x76c)
[ 31.435613] [<c0f8e9ec>] (__rtnl_newlink) from [<c0f8eda8>] (rtnl_newlink+0x44/0x60)
[ 31.443329] [<c0f8eda8>] (rtnl_newlink) from [<c0f89f20>] (rtnetlink_rcv_msg+0x2cc/0x51c)
[ 31.451477] [<c0f89f20>] (rtnetlink_rcv_msg) from [<c1008df8>] (netlink_rcv_skb+0xb8/0x110)
[ 31.459796] [<c1008df8>] (netlink_rcv_skb) from [<c1008648>] (netlink_unicast+0x17c/0x1f8)
[ 31.468026] [<c1008648>] (netlink_unicast) from [<c1008980>] (netlink_sendmsg+0x2bc/0x3b4)
[ 31.476261] [<c1008980>] (netlink_sendmsg) from [<c0f43858>] (___sys_sendmsg+0x230/0x250)
[ 31.484408] [<c0f43858>] (___sys_sendmsg) from [<c0f44c84>] (__sys_sendmsg+0x50/0x8c)
[ 31.492209] [<c0f44c84>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x28)
[ 31.500090] Exception stack(0xedf47fa8 to 0xedf47ff0)
[ 31.505122] 7fa0: 00000002b6f2e06000000003beabd6a40000000000000000
[ 31.513265] 7fc0: 00000002b6f2e0605d6e321300000128000000000000000100000006000619c4
[ 31.521405] 7fe0: 00086078beabd6580005edbcb6e7ce68
Since VID 0 is an invalid pvid from the bridge's point of view, let's
add this check in dsa_8021q_restore_pvid to avoid restoring a pvid that
doesn't really exist.
Fixes: 5f33183b7fdf ("net: dsa: tag_8021q: Restore bridge VLANs when enabling vlan_filtering") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrea Mayer [Sat, 16 Nov 2019 15:05:53 +0000 (16:05 +0100)]
seg6: fix skb transport_header after decap_and_validate()
in the receive path (more precisely in ip6_rcv_core()) the
skb->transport_header is set to skb->network_header + sizeof(*hdr). As a
consequence, after routing operations, destination input expects to find
skb->transport_header correctly set to the next protocol (or extension
header) that follows the network protocol. However, decap behaviors (DX*,
DT*) remove the outer IPv6 and SRH extension and do not set again the
skb->transport_header pointer correctly. For this reason, the patch sets
the skb->transport_header to the skb->network_header + sizeof(hdr) in each
DX* and DT* behavior.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: David S. Miller <davem@davemloft.net>
Nishad Kamdar [Sat, 16 Nov 2019 09:40:59 +0000 (15:10 +0530)]
net: stmmac: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style in
header files related to STMicroelectronics based Multi-Gigabit
Ethernet driver. For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nishad Kamdar [Sat, 16 Nov 2019 09:20:45 +0000 (14:50 +0530)]
octeontx2-af: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style in
header files related to Marvell OcteonTX2 network devices.
It uses an expilict block comment for the SPDX License
Identifier.
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 16 Nov 2019 16:20:43 +0000 (08:20 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"11 fixes"
MM fixes and one xz decompressor fix.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/debug.c: PageAnon() is true for PageKsm() pages
mm/debug.c: __dump_page() prints an extra line
mm/page_io.c: do not free shared swap slots
mm/memory_hotplug: fix try_offline_node()
mm,thp: recheck each page before collapsing file THP
mm: slub: really fix slab walking for init_on_free
mm: hugetlb: switch to css_tryget() in hugetlb_cgroup_charge_cgroup()
mm: memcg: switch to css_tryget() in get_mem_cgroup_from_mm()
lib/xz: fix XZ_DYNALLOC to avoid useless memory reallocations
mm: fix trying to reclaim unevictable lru page when calling madvise_pageout
mm: mempolicy: fix the wrong return value and potential pages leak of mbind
Ralph Campbell [Sat, 16 Nov 2019 01:35:07 +0000 (17:35 -0800)]
mm/debug.c: PageAnon() is true for PageKsm() pages
PageAnon() and PageKsm() use the low two bits of the page->mapping
pointer to indicate the page type. PageAnon() only checks the LSB while
PageKsm() checks the least significant 2 bits are equal to 3.
Therefore, PageAnon() is true for KSM pages. __dump_page() incorrectly
will never print "ksm" because it checks PageAnon() first. Fix this by
checking PageKsm() first.
Link: http://lkml.kernel.org/r/20191113000651.20677-1-rcampbell@nvidia.com Fixes: 1c6fb1d89e73 ("mm: print more information about mapping in __dump_page") Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It looks like the intent was to use pr_cont() for printing "flags:" but
pr_cont() usage is discouraged so fix this by extending the format to
include the flags into a single line:
Vinayak Menon [Sat, 16 Nov 2019 01:35:00 +0000 (17:35 -0800)]
mm/page_io.c: do not free shared swap slots
The following race is observed due to which a processes faulting on a
swap entry, finds the page neither in swapcache nor swap. This causes
zram to give a zero filled page that gets mapped to the process,
resulting in a user space crash later.
Consider parent and child processes Pa and Pb sharing the same swap slot
with swap_count 2. Swap is on zram with SWP_SYNCHRONOUS_IO set.
Virtual address 'VA' of Pa and Pb points to the shared swap entry.
Pa Pb
fault on VA fault on VA
do_swap_page do_swap_page
lookup_swap_cache fails lookup_swap_cache fails
Pb scheduled out
swapin_readahead (deletes zram entry)
swap_free (makes swap_count 1)
Pb scheduled in
swap_readpage (swap_count == 1)
Takes SWP_SYNCHRONOUS_IO path
zram enrty absent
zram gives a zero filled page
Fix this by making sure that swap slot is freed only when swap count
drops down to one.
Link: http://lkml.kernel.org/r/1571743294-14285-1-git-send-email-vinmenon@codeaurora.org Fixes: aa8d22a11da9 ("mm: swap: SWP_SYNCHRONOUS_IO: skip swapcache only if swapped page has no other reference") Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org> Suggested-by: Minchan Kim <minchan@google.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
try_offline_node() is pretty much broken right now:
- The node span is updated when onlining memory, not when adding it. We
ignore memory that was mever onlined. Bad.
- We touch possible garbage memmaps. The pfn_to_nid(pfn) can easily
trigger a kernel panic. Bad for memory that is offline but also bad
for subsection hotadd with ZONE_DEVICE, whereby the memmap of the
first PFN of a section might contain garbage.
- Sections belonging to mixed nodes are not properly considered.
As memory blocks might belong to multiple nodes, we would have to walk
all pageblocks (or at least subsections) within present sections.
However, we don't have a way to identify whether a memmap that is not
online was initialized (relevant for ZONE_DEVICE). This makes things
more complicated.
Luckily, we can piggy pack on the node span and the nid stored in memory
blocks. Currently, the node span is grown when calling
move_pfn_range_to_zone() - e.g., when onlining memory, and shrunk when
removing memory, before calling try_offline_node(). Sysfs links are
created via link_mem_sections(), e.g., during boot or when adding
memory.
If the node still spans memory or if any memory block belongs to the
nid, we don't set the node offline. As memory blocks that span multiple
nodes cannot get offlined, the nid stored in memory blocks is reliable
enough (for such online memory blocks, the node still spans the memory).
Introduce for_each_memory_block() to efficiently walk all memory blocks.
Note: We will soon stop shrinking the ZONE_DEVICE zone and the node span
when removing ZONE_DEVICE memory to fix similar issues (access of
garbage memmaps) - until we have a reliable way to identify whether
these memmaps were properly initialized. This implies later, that once
a node had ZONE_DEVICE memory, we won't be able to set a node offline -
which should be acceptable.
Since commit f1dd2cd13c4b ("mm, memory_hotplug: do not associate
hotadded memory to zones until online") memory that is added is not
assoziated with a zone/node (memmap not initialized). The introducing
commit 60a5a19e7419 ("memory-hotplug: remove sysfs file of node")
already missed that we could have multiple nodes for a section and that
the zone/node span is updated when onlining pages, not when adding them.
I tested this by hotplugging two DIMMs to a memory-less and cpu-less
NUMA node. The node is properly onlined when adding the DIMMs. When
removing the DIMMs, the node is properly offlined.
Song Liu [Sat, 16 Nov 2019 01:34:53 +0000 (17:34 -0800)]
mm,thp: recheck each page before collapsing file THP
In collapse_file(), for !is_shmem case, current check cannot guarantee
the locked page is up-to-date. Specifically, xas_unlock_irq() should
not be called before lock_page() and get_page(); and it is necessary to
recheck PageUptodate() after locking the page.
With this bug and CONFIG_READ_ONLY_THP_FOR_FS=y, madvise(HUGE)'ed .text
may contain corrupted data. This is because khugepaged mistakenly
collapses some not up-to-date sub pages into a huge page, and assumes
the huge page is up-to-date. This will NOT corrupt data in the disk,
because the page is read-only and never written back. Fix this by
properly checking PageUptodate() after locking the page. This check
replaces "VM_BUG_ON_PAGE(!PageUptodate(page), page);".
Also, move PageDirty() check after locking the page. Current khugepaged
should not try to collapse dirty file THP, because it is limited to
read-only .text. The only case we hit a dirty page here is when the
page hasn't been written since write. Bail out and retry when this
happens.
syzbot reported bug on previous version of this patch.
Link: http://lkml.kernel.org/r/20191106060930.2571389-2-songliubraving@fb.com Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") Signed-off-by: Song Liu <songliubraving@fb.com> Reported-by: syzbot+efb9e48b9fbdc49bb34a@syzkaller.appspotmail.com Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Laura Abbott [Sat, 16 Nov 2019 01:34:50 +0000 (17:34 -0800)]
mm: slub: really fix slab walking for init_on_free
Commit 1b7e816fc80e ("mm: slub: Fix slab walking for init_on_free")
fixed one problem with the slab walking but missed a key detail: When
walking the list, the head and tail pointers need to be updated since we
end up reversing the list as a result. Without doing this, bulk free is
broken.
One way this is exposed is a NULL pointer with slub_debug=F:
=============================================================================
BUG skbuff_head_cache (Tainted: G T): Object already free
-----------------------------------------------------------------------------
Roman Gushchin [Sat, 16 Nov 2019 01:34:46 +0000 (17:34 -0800)]
mm: hugetlb: switch to css_tryget() in hugetlb_cgroup_charge_cgroup()
An exiting task might belong to an offline cgroup. In this case an
attempt to grab a cgroup reference from the task can end up with an
infinite loop in hugetlb_cgroup_charge_cgroup(), because neither the
cgroup will become online, neither the task will be migrated to a live
cgroup.
Fix this by switching over to css_tryget(). As css_tryget_online()
can't guarantee that the cgroup won't go offline, in most cases the
check doesn't make sense. In this particular case users of
hugetlb_cgroup_charge_cgroup() are not affected by this change.
A similar problem is described by commit 18fa84a2db0e ("cgroup: Use
css_tryget() instead of css_tryget_online() in task_get_css()").
Link: http://lkml.kernel.org/r/20191106225131.3543616-2-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Sat, 16 Nov 2019 01:34:43 +0000 (17:34 -0800)]
mm: memcg: switch to css_tryget() in get_mem_cgroup_from_mm()
We've encountered a rcu stall in get_mem_cgroup_from_mm():
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 33-....: (21000 ticks this GP) idle=6c6/1/0x4000000000000002 softirq=35441/35441 fqs=5017
(t=21031 jiffies g=324821 q=95837) NMI backtrace for cpu 33
<...>
RIP: 0010:get_mem_cgroup_from_mm+0x2f/0x90
<...>
__memcg_kmem_charge+0x55/0x140
__alloc_pages_nodemask+0x267/0x320
pipe_write+0x1ad/0x400
new_sync_write+0x127/0x1c0
__kernel_write+0x4f/0xf0
dump_emit+0x91/0xc0
writenote+0xa0/0xc0
elf_core_dump+0x11af/0x1430
do_coredump+0xc65/0xee0
get_signal+0x132/0x7c0
do_signal+0x36/0x640
exit_to_usermode_loop+0x61/0xd0
do_syscall_64+0xd4/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The problem is caused by an exiting task which is associated with an
offline memcg. We're iterating over and over in the do {} while
(!css_tryget_online()) loop, but obviously the memcg won't become online
and the exiting task won't be migrated to a live memcg.
Let's fix it by switching from css_tryget_online() to css_tryget().
As css_tryget_online() cannot guarantee that the memcg won't go offline,
the check is usually useless, except some rare cases when for example it
determines if something should be presented to a user.
A similar problem is described by commit 18fa84a2db0e ("cgroup: Use
css_tryget() instead of css_tryget_online() in task_get_css()").
Johannes:
: The bug aside, it doesn't matter whether the cgroup is online for the
: callers. It used to matter when offlining needed to evacuate all charges
: from the memcg, and so needed to prevent new ones from showing up, but we
: don't care now.
Link: http://lkml.kernel.org/r/20191106225131.3543616-1-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Shakeel Butt <shakeeb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / mirror_ubuntu-kernels.git / log