The function rawsock_create() calls a privileged function sk_alloc(), which requires a ns-aware check to check net->user_ns, i.e., ns_capable(). However, the original code checks the init_user_ns using capable(). So we replace the capable() with ns_capable().
Signed-off-by: Jeimon <jjjinmeng.zhou@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
When an SPI device is unregistered, the spi->controller->cleanup() is
called in the device's release callback. That's wrong for a couple of
reasons:
1. spi_dev_put() can be called before spi_add_device() is called. And
it's spi_add_device() that calls spi_setup(). This will cause clean()
to get called without the spi device ever being setup.
2. There's no guarantee that the controller's driver would be present by
the time the spi device's release function gets called.
3. It also causes "sleeping in atomic context" stack dump[1] when device
link deletion code does a put_device() on the spi device.
Fix these issues by simply moving the cleanup from the device release
callback to the actual spi_unregister_device() function.
The ni1/ni2 ratio formula [1] uses the pclk which is the prescaled mclk.
The max98088 datasheet [2] has no such formula but table-12 equals so
we can assume that it is the same for both devices.
Commit bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener")
tried to make sure that there could not be a confusion between the opener of
a /proc/$pid/attr/ file and the writer. It used struct cred to make sure
the privileges didn't change. However, there were existing cases where a more
privileged thread was passing the opened fd to a differently privileged thread
(during container setup). Instead, use mm_struct to track whether the opener
and writer are still the same process. (This is what several other proc files
already do, though for different reasons.)
Reported-by: Christian Brauner <christian.brauner@ubuntu.com> Reported-by: Andrea Righi <andrea.righi@canonical.com> Tested-by: Andrea Righi <andrea.righi@canonical.com> Fixes: bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Fix another "confused deputy" weakness[1]. Writes to /proc/$pid/attr/
files need to check the opener credentials, since these fds do not
transition state across execve(). Without this, it is possible to
trick another process (which may have different credentials) to write
to its own /proc/$pid/attr/ files, leading to unexpected and possibly
exploitable behaviors.
IFF_POINTOPOINT interfaces use NUD_NOARP entries for IPv6. It's possible to
fill up the neighbour table with enough entries that it will overflow for
valid connections after that.
This behaviour is more prevalent after commit 58956317c8de ("neighbor:
Improve garbage collection") is applied, as it prevents removal from
entries that are not NUD_FAILED, unless they are more than 5s old.
Fixes: 58956317c8de (neighbor: Improve garbage collection) Reported-by: Kasper Dupont <kasperd@gjkwv.06.feb.2021.kasperd.net> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Jan Beulich [Tue, 18 May 2021 16:13:42 +0000 (18:13 +0200)]
xen-pciback: redo VF placement in the virtual topology
BugLink: https://bugs.launchpad.net/bugs/1932957
The commit referenced below was incomplete: It merely affected what
would get written to the vdev-<N> xenstore node. The guest would still
find the function at the original function number as long as
__xen_pcibk_get_pci_dev() wouldn't be in sync. The same goes for AER wrt
__xen_pcibk_get_pcifront_dev().
Undo overriding the function to zero and instead make sure that VFs at
function zero remain alone in their slot. This has the added benefit of
improving overall capacity, considering that there's only a total of 32
slots available right now (PCI segment and bus can both only ever be
zero at present).
LZ4 final literal copy could be overlapped when doing
in-place decompression, so it's unsafe to just use memcpy()
on an optimized memcpy approach but memmove() instead.
Upstream LZ4 has updated this years ago [1] (and the impact
is non-sensible [2] plus only a few bytes remain), this commit
just synchronizes LZ4 upstream code to the kernel side as well.
It can be observed as EROFS in-place decompression failure
on specific files when X86_FEATURE_ERMS is unsupported,
memcpy() optimization of commit 59daa706fbec ("x86, mem:
Optimize memcpy by avoiding memory false dependece") will
be enabled then.
Currently most modern x86-CPUs support ERMS, these CPUs just
use "rep movsb" approach so no problem at all. However, it can
still be verified with forcely disabling ERMS feature...
We didn't observe any strange on arm64/arm/x86 platform before
since most memcpy() would behave in an increasing address order
("copy upwards" [3]) and it's the correct order of in-place
decompression but it really needs an update to memmove() for sure
considering it's an undefined behavior according to the standard
and some unique optimization already exists in the kernel.
Commit 03fdfb2690099 ("KVM: arm64: Don't write junk to sysregs on
reset") flipped the register number to 0 for all the debug registers
in the sysreg table, hereby indicating that these registers live
in a separate shadow structure.
However, the author of this patch failed to realise that all the
accessors are using that particular index instead of the register
encoding, resulting in all the registers hitting index 0. Not quite
a valid implementation of the architecture...
Address the issue by fixing all the accessors to use the CRm field
of the encoding, which contains the debug register index.
Fixes: 03fdfb2690099 ("KVM: arm64: Don't write junk to sysregs on reset") Reported-by: Ricardo Koller <ricarkol@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Drop bits 63:32 on loads/stores to/from DRs and CRs when the vCPU is not
in 64-bit mode. The APM states bits 63:32 are dropped for both DRs and
CRs:
In 64-bit mode, the operand size is fixed at 64 bits without the need
for a REX prefix. In non-64-bit mode, the operand size is fixed at 32
bits and the upper 32 bits of the destination are forced to 0.
Fixes: 7ff76d58a9dc ("KVM: SVM: enhance MOV CR intercept handler") Fixes: cae3797a4639 ("KVM: SVM: enhance mov DR intercept handler") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[sudip: manual backport to old file] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The following test case reproduces an issue of wrongly freeing in-use
blocks on the readonly seed device when fstrim is called on the rw sprout
device. As shown below.
Create a seed device and add a sprout device to it:
$ mkfs.btrfs -fq -dsingle -msingle /dev/loop0
$ btrfstune -S 1 /dev/loop0
$ mount /dev/loop0 /btrfs
$ btrfs dev add -f /dev/loop1 /btrfs
BTRFS info (device loop0): relocating block group 290455552 flags system
BTRFS info (device loop0): relocating block group 1048576 flags system
BTRFS info (device loop0): disk added /dev/loop1
$ umount /btrfs
Mount the sprout device and run fstrim:
$ mount /dev/loop1 /btrfs
$ fstrim /btrfs
$ umount /btrfs
Now try to mount the seed device, and it fails:
$ mount /dev/loop0 /btrfs
mount: /btrfs: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.
Block 5292032 is missing on the readonly seed device:
When a THP is removed from the page cache by reclaim, we replace it with a
shadow entry that occupies all slots of the XArray previously occupied by
the THP. If the user then accesses that page again, we only allocate a
single page, but storing it into the shadow entry replaces all entries
with that one page. That leads to bugs like
page dumped because: VM_BUG_ON_PAGE(page_to_pgoff(page) != offset)
------------[ cut here ]------------
kernel BUG at mm/filemap.c:2529!
This is hard to reproduce with mainline, but happens regularly with the
THP patchset (as so many more THPs are created). This solution is take
from the THP patchset. It splits the shadow entry into order-0 pieces at
the time that we bring a new page into cache.
Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Song Liu <songliubraving@fb.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Qian Cai <cai@lca.pw> Link: https://lkml.kernel.org/r/20200903183029.14930-4-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
In order to use multi-index entries for huge pages in the page cache, we
need to be able to split a multi-index entry (eg if a file is truncated in
the middle of a huge page entry). This version does not support splitting
more than one level of the tree at a time. This is an acceptable
limitation for the page cache as we do not expect to support order-12
pages in the near future.
[akpm@linux-foundation.org: export xas_split_alloc() to modules]
[willy@infradead.org: fix xarray split] Link: https://lkml.kernel.org/r/20200910175450.GV6583@casper.infradead.org
[willy@infradead.org: fix xarray] Link: https://lkml.kernel.org/r/20201001233943.GW20115@casper.infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Qian Cai <cai@lca.pw> Cc: Song Liu <songliubraving@fb.com> Link: https://lkml.kernel.org/r/20200903183029.14930-3-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Patch series "Fix read-only THP for non-tmpfs filesystems".
As described more verbosely in the [3/3] changelog, we can inadvertently
put an order-0 page in the page cache which occupies 512 consecutive
entries. Users are running into this if they enable the
READ_ONLY_THP_FOR_FS config option; see
https://bugzilla.kernel.org/show_bug.cgi?id=206569 and Qian Cai has also
reported it here:
https://lore.kernel.org/lkml/20200616013309.GB815@lca.pw/
This is a rather intrusive way of fixing the problem, but has the
advantage that I've actually been testing it with the THP patches, which
means that it sees far more use than it does upstream -- indeed, Song has
been entirely unable to reproduce it. It also has the advantage that it
removes a few patches from my gargantuan backlog of THP patches.
This patch (of 3):
This function returns the order of the entry at the index. We need this
because there isn't space in the shadow entry to encode its order.
[akpm@linux-foundation.org: export xa_get_order to modules]
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Qian Cai <cai@lca.pw> Cc: Song Liu <songliubraving@fb.com> Link: https://lkml.kernel.org/r/20200903183029.14930-1-willy@infradead.org Link: https://lkml.kernel.org/r/20200903183029.14930-2-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The dev_port is meant to distinguish the network ports belonging to
the same PCI function. Our devices only have one network port
associated with each PCI function and so we should not set it for
correctness.
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The userfaultfd hugetlb tests cause a resv_huge_pages underflow. This
happens when hugetlb_mcopy_atomic_pte() is called with !is_continue on
an index for which we already have a page in the cache. When this
happens, we allocate a second page, double consuming the reservation,
and then fail to insert the page into the cache and return -EEXIST.
To fix this, we first check if there is a page in the cache which
already consumed the reservation, and return -EEXIST immediately if so.
There is still a rare condition where we fail to copy the page contents
AND race with a call for hugetlb_no_page() for this index and again we
will underflow resv_huge_pages. That is fixed in a more complicated
patch not targeted for -stable.
Test:
Hacked the code locally such that resv_huge_pages underflows produce a
warning, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the test runs number
of free/resv hugepages is correct.
[mike.kravetz@oracle.com: changelog fixes]
Link: https://lkml.kernel.org/r/20210528004649.85298-1-almasrymina@google.com Fixes: 8fb5debc5fcd ("userfaultfd: hugetlbfs: add hugetlb_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
while (1) {
ret = whatever();
if (ret)
goto out;
}
ret = 0
out:
return ret;
However several places in this while loop we simply break; when there's
a problem, thus clearing the return value, and in one case we do a
return -EIO, and leak the memory for the path.
Fix this by re-arranging the loop to deal with ret == 1 coming from
btrfs_search_slot, and then simply delete the
ret = 0;
out:
bit so everybody can break if there is an error, which will allow for
proper error handling to occur.
CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
We are unconditionally returning 0 in cleanup_ref_head, despite the fact
that btrfs_del_csums could fail. We need to return the error so the
transaction gets aborted properly, fix this by returning ret from
btrfs_del_csums in cleanup_ref_head.
Reviewed-by: Qu Wenruo <wqu@suse.com> CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Error injection stress would sometimes fail with checksums on disk that
did not have a corresponding extent. This occurred because the pattern
in btrfs_del_csums was
while (1) {
ret = btrfs_search_slot();
if (ret < 0)
break;
}
ret = 0;
out:
btrfs_free_path(path);
return ret;
If we got an error from btrfs_search_slot we'd clear the error because
we were breaking instead of goto out. Instead of using goto out, simply
handle the cases where we may leave a random value in ret, and get rid
of the
ret = 0;
out:
pattern and simply allow break to have the proper error reporting. With
this fix we properly abort the transaction and do not commit thinking we
successfully deleted the csum.
Reviewed-by: Qu Wenruo <wqu@suse.com> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
While doing error injection testing I saw that sometimes we'd get an
abort that wouldn't stop the current transaction commit from completing.
This abort was coming from finish ordered IO, but at this point in the
transaction commit we should have gotten an error and stopped.
It turns out the abort came from finish ordered io while trying to write
out the free space cache. It occurred to me that any failure inside of
finish_ordered_io isn't actually raised to the person doing the writing,
so we could have any number of failures in this path and think the
ordered extent completed successfully and the inode was fine.
Fix this by marking the ordered extent with BTRFS_ORDERED_IOERR, and
marking the mapping of the inode with mapping_set_error, so any callers
that simply call fdatawait will also get the error.
With this we're seeing the IO error on the free space inode when we fail
to do the finish_ordered_io.
CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
PIC interrupts do not support affinity setting and they can end up on
any online CPU. Therefore, it's required to mark the associated vectors
as system-wide reserved. Otherwise, the corresponding irq descriptors
are copied to the secondary CPUs but the vectors are not marked as
assigned or reserved. This works correctly for the IO/APIC case.
When the IO/APIC is disabled via config, kernel command line or lack of
enumeration then all legacy interrupts are routed through the PIC, but
nothing marks them as system-wide reserved vectors.
As a consequence, a subsequent allocation on a secondary CPU can result in
allocating one of these vectors, which triggers the BUG() in
apic_update_vector() because the interrupt descriptor slot is not empty.
Imran tried to work around that by marking those interrupts as allocated
when a CPU comes online. But that's wrong in case that the IO/APIC is
available and one of the legacy interrupts, e.g. IRQ0, has been switched to
PIC mode because then marking them as allocated will fail as they are
already marked as system vectors.
Stay consistent and update the legacy vectors after attempting IO/APIC
initialization and mark them as system vectors in case that no IO/APIC is
available.
Fixes: 69cde0004a4b ("x86/vector: Use matrix allocator for vector assignment") Reported-by: Imran Khan <imran.f.khan@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210519233928.2157496-1-imran.f.khan@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Releasing pinned BOs is illegal now. UVD 6 was missing from:
commit 2f40801dc553 ("drm/amdgpu: make sure we unpin the UVD BO")
Fixes: 2f40801dc553 ("drm/amdgpu: make sure we unpin the UVD BO") Cc: stable@vger.kernel.org Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
On QUERY2 IOCTL don't query counts of correctable
and uncorrectable errors, since when RAS is
enabled and supported on Vega20 server boards,
this takes insurmountably long time, in O(n^3),
which slows the system down to the point of it
being unusable when we have GUI up.
Fixes: ae363a212b14 ("drm/amdgpu: Add a new flag to AMDGPU_CTX_OP_QUERY_STATE2") Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
It's possible to trigger NULL pointer dereference by local unprivileged
user, when calling getsockname() after failed bind() (e.g. the bind
fails because LLCP_SAP_MAX used as SAP):
When fallocate punches holes out of inode size, if original isize is in
the middle of last cluster, then the part from isize to the end of the
cluster will be zeroed with buffer write, at that time isize is not yet
updated to match the new size, if writeback is kicked in, it will invoke
ocfs2_writepage()->block_write_full_page() where the pages out of inode
size will be dropped. That will cause file corruption. Fix this by
zero out eof blocks when extending the inode size.
Running the following command with qemu-image 4.2.1 can get a corrupted
coverted image file easily.
Link: https://lkml.kernel.org/r/20210528210648.9124-1-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
During boot, kernel_init_freeable() initializes `cad_pid` to the init
task's struct pid. Later on, we may change `cad_pid` via a sysctl, and
when this happens proc_do_cad_pid() will increment the refcount on the
new pid via get_pid(), and will decrement the refcount on the old pid
via put_pid(). As we never called get_pid() when we initialized
`cad_pid`, we decrement a reference we never incremented, can therefore
free the init task's struct pid early. As there can be dangling
references to the struct pid, we can later encounter a use-after-free
(e.g. when delivering signals).
This was spotted when fuzzing v5.13-rc3 with Syzkaller, but seems to
have been around since the conversion of `cad_pid` to struct pid in
commit 9ec52099e4b8 ("[PATCH] replace cad_pid by a struct pid") from the
pre-KASAN stone age of v2.6.19.
Fix this by getting a reference to the init task's struct pid when we
assign it to `cad_pid`.
Full KASAN splat below.
==================================================================
BUG: KASAN: use-after-free in ns_of_pid include/linux/pid.h:153 [inline]
BUG: KASAN: use-after-free in task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509
Read of size 4 at addr ffff23794dda0004 by task syz-executor.0/273
Memory state around the buggy address: ffff23794dd9ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff23794dd9ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff23794dda0000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff23794dda0080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff23794dda0100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================
Link: https://lkml.kernel.org/r/20210524172230.38715-1-mark.rutland@arm.com Fixes: 9ec52099e4b8678a ("[PATCH] replace cad_pid by a struct pid") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Christian Brauner <christian@brauner.io> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Phil Elwell [Tue, 8 Jun 2021 12:00:49 +0000 (13:00 +0100)]
usb: dwc2: Fix build in periphal-only mode
BugLink: https://bugs.launchpad.net/bugs/1932957
In branches to which 24d209dba5a3 ("usb: dwc2: Fix hibernation between
host and device modes.") has been back-ported, the bus_suspended member
of struct dwc2_hsotg is only present in builds that support host-mode.
To avoid having to pull in several more non-Fix commits in order to
get it to compile, wrap the usage of the member in a macro conditional.
Fixes: 24d209dba5a3 ("usb: dwc2: Fix hibernation between host and device modes.") Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
This patch's modification is according to Jan Kara's suggestion in:
https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/
"I see. Now I understand your patch. Honestly, seeing how fragile is trying
to fix extent tree after split has failed in the middle, I would probably
go even further and make sure we fix the tree properly in case of ENOSPC
and EDQUOT (those are easily user triggerable). Anything else indicates a
HW problem or fs corruption so I'd rather leave the extent tree as is and
don't try to fix it (which also means we will not create overlapping
extents)."
Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210506141042.3298679-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Per schematic, both PU and SOC regulator are supplied from LTC3676 SW1
via VDDSOC_IN rail, add the PU input. Both VDD1P1, VDD2P5 are supplied
from LTC3676 SW2 via VDDHIGH_IN rail, add both inputs.
While no instability or problems are currently observed, the regulators
should be fully described in DT and that description should fully match
the hardware, else this might lead to unforseen issues later. Fix this.
Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The FEC does not have a PHY so it should not have a phy-handle. It is
connected to the switch at RGMII level so we need a fixed-link sub-node
on both ends.
This was not a problem until the qca8k.c driver was converted to PHYLINK
by commit b3591c2a3661 ("net: dsa: qca8k: Switch to PHYLINK instead of
PHYLIB"). That commit revealed the FEC configuration was not correct.
Fixes: 87489ec3a77f ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards") Cc: stable@vger.kernel.org Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
For the HP Pavilion 15-CK0xx, with audio subsystem ID 0x103c:0x841c,
adding a line in patch_realtek.c to apply the ALC269_FIXUP_HP_MUTE_LED_MIC3
fix activates the mute key LED.
Signed-off-by: Carlos M <carlos.marr.pz@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210531202026.35427-1-carlos.marr.pz@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
snd_timer_notify1() calls the notification to each slave for a master
event, but it passes a wrong event number. It should be +10 offset,
corresponding to SNDRV_TIMER_EVENT_MXXX, but it's incorrectly with
+100 offset. Casually this was spotted by UBSAN check via syzkaller.
This effectively changes collection_is_mt from
contact ID in report->field
to
(device is Win8 => collection is finger) && contact ID in report->field
Some devices erroneously report Pen for fingers, and Win8 stylus-on-touchscreen
devices report contact ID, but mark the accompanying touchscreen device's
collection correctly
Commit 9d7b18668956 ("HID: magicmouse: add support for Apple Magic
Trackpad 2") added a sanity check for an Apple trackpad but returned
success instead of -ENODEV when the check failed. This means that the
remove callback will dereference the never-initialised driver data
pointer when the driver is later unbound (e.g. on USB disconnect).
Reported-by: syzbot+ee6f6e2e68886ca256a8@syzkaller.appspotmail.com Fixes: 9d7b18668956 ("HID: magicmouse: add support for Apple Magic Trackpad 2") Cc: stable@vger.kernel.org # 4.20 Cc: Claudio Mettler <claudio@ponyfleisch.ch> Cc: Marek Wyborski <marek.wyborski@emwesoft.com> Cc: Sean O'Brien <seobrien@chromium.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
For ELAN touchscreen, we found our boot code of IC was not flexible enough
to receive and handle this command.
Once the FW main code of our controller is crashed for some reason,
the controller could not be enumerated successfully to be recognized
by the system host. therefore, it lost touch functionality.
Add quirk for skip send power-on command after reset.
It will impact to ELAN touchscreen and touchpad on HID over I2C projects.
Fixes: 43b7029f475e ("HID: i2c-hid: Send power-on command after reset"). Cc: stable@vger.kernel.org Signed-off-by: Johnny Chuang <johnny.chuang.emc@gmail.com> Reviewed-by: Harry Cutts <hcutts@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
In case of caif_enroll_dev() fail, allocated
link_support won't be assigned to the corresponding
structure. So simply free allocated pointer in case
of error.
Fixes: 7ad65bf68d70 ("caif: Add support for CAIF over CDC NCM USB interface") Cc: stable@vger.kernel.org Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
In case of caif_enroll_dev() fail, allocated
link_support won't be assigned to the corresponding
structure. So simply free allocated pointer in case
of error
Fixes: 7c18d2205ea7 ("caif: Restructure how link caif link layer enroll") Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+7ec324747ce876a29db6@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
caif_enroll_dev() can fail in some cases. Ingnoring
these cases can lead to memory leak due to not assigning
link_support pointer to anywhere.
Fixes: 7c18d2205ea7 ("caif: Restructure how link caif link layer enroll") Cc: stable@vger.kernel.org Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Cc: stable@vger.kernel.org Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The hci_sock_dev_event() function will cleanup the hdev object for
sockets even if this object may still be in used within the
hci_sock_bound_ioctl() function, result in UAF vulnerability.
This patch replace the BH context lock to serialize these affairs
and prevent the race condition.
Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
In the cleanup routine for failed initialization of HCI device,
the flush_work(&hdev->rx_work) need to be finished before the
flush_work(&hdev->cmd_work). Otherwise, the hci_rx_work() can
possibly invoke new cmd_work and cause a bug, like double free,
in late processings.
This was assigned CVE-2021-3564.
This patch reorder the flush_work() to fix this bug.
Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-bluetooth@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Hao Xiong <mart1n@zju.edu.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
When enabling a bearer by name, we don't sanity check its name with
higher slot in bearer list. This may have the effect that the name
of an already enabled bearer bypasses the check.
To fix the above issue, we just perform an extra checking with all
existing bearers.
Fixes: cb30a63384bc9 ("tipc: refactor function tipc_enable_bearer()") Cc: stable@vger.kernel.org Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Add extack error messages for -EINVAL errors when enabling bearer,
getting/setting properties for a media/bearer
Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Looks like the swsup_sidle_act quirk handling is unreliable for serial
ports. The serial ports just eventually stop idling until woken up and
re-idled again. As the serial port not idling blocks any deeper SoC idle
states, it's adds an annoying random flakeyness for power management.
Let's just switch to swsup_sidle quirk instead like we already do for
omap3 uarts. This means we manually idle the port instead of trying to
use the hardware autoidle features when not in use.
For more details on why the serial ports have been using swsup_idle_act,
see commit 66dde54e978a ("ARM: OMAP2+: hwmod-data: UART IP needs software
control to manage sidle modes"). It seems that the swsup_idle_act quirk
handling is not enough though, and for example the TI Android kernel
changed to using swsup_sidle with commit 77c34c84e1e0 ("OMAP4: HWMOD:
UART1: disable smart-idle.").
Fixes: b4a9a7a38917 ("bus: ti-sysc: Handle swsup idle mode quirks") Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Ivan Jelincic <parazyd@dyne.org> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sicelo A. Mhlongo <absicsz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
While enabling EDAC support for the LS1028A it was discovered that the
memory node has a wrong endianness setting as well as a wrong interrupt
assignment. Fix both.
This was tested on a sl28 board. To force ECC errors, you can use the
error injection supported by the controller in hardware (with
CONFIG_EDAC_DEBUG enabled):
# enable error injection
$ echo 0x100 > /sys/devices/system/edac/mc/mc0/inject_ctrl
# flip lowest bit of the data
$ echo 0x1 > /sys/devices/system/edac/mc/mc0/inject_data_lo
Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC") Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Add missing exception tracing to XDP when a number of different errors
can occur. The support was only partial. Several errors where not
logged which would confuse the user quite a lot not knowing where and
why the packets disappeared.
Fixes: 74608d17fe29 ("i40e: add support for XDP_TX action") Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Optimize i40e_run_xdp_zc() for the XDP program verdict being
XDP_REDIRECT in the xsk zero-copy path. This path is only used when
having AF_XDP zero-copy on and in that case most packets will be
directed to user space. This provides a little over 100k extra packets
in throughput on my server when running l2fwd in xdpsock.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
If the hardware is still accessing memory after SMMU translation
is disabled (as part of smmu shutdown callback), then the
IOVAs (I/O virtual address) which it was using will go on the bus
as the physical addresses which will result in unknown crashes
like NoC/interconnect errors.
So, implement shutdown callback for i2c driver to suspend the bus
during system "reboot" or "shutdown".
Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Currently in the ice driver, the check whether to
allow a LLDP packet to egress the interface from the
PF_VSI is being based on the SKB's priority field.
It checks to see if the packets priority is equal to
TC_PRIO_CONTROL. Injected LLDP packets do not always
meet this condition.
SCAPY defaults to a sk_buff->protocol value of ETH_P_ALL
(0x0003) and does not set the priority field. There will
be other injection methods (even ones used by end users)
that will not correctly configure the socket so that
SKB fields are correctly populated.
Then ethernet header has to have to correct value for
the protocol though.
Add a check to also allow packets whose ethhdr->h_proto
matches ETH_P_LLDP (0x88CC).
Fixes: 0c3a6101ff2d ("ice: Allow egress control packets from PF_VSI") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Some AVF drivers expect the VF_MBX_ATQLEN register to be cleared for any
type of VFR/VFLR. Fix this by clearing the VF_MBX_ATQLEN register at the
same time as VF_MBX_ARQLEN.
Fixes: 82ba01282cf8 ("ice: clear VF ARQLEN register on reset") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Reported by syzbot:
HEAD commit: 90c911ad Merge tag 'fixes' of git://git.kernel.org/pub/scm..
git tree: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master link: https://syzkaller.appspot.com/bug?extid=123aa35098fd3c000eb7
compiler: Debian clang version 11.0.1-2
==================================================================
BUG: KASAN: slab-out-of-bounds in fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline]
BUG: KASAN: slab-out-of-bounds in fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732
Read of size 8 at addr ffff8880145c78f8 by task syz-executor.4/17760
Memory state around the buggy address: ffff8880145c7780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880145c7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880145c7880: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc
^ ffff8880145c7900: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880145c7980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
==================================================================
In the ip6_route_info_create function, in the case that the nh pointer
is not NULL, the fib6_nh in fib6_info has not been allocated.
Therefore, when trying to free fib6_info in this error case using
fib6_info_release, the function will call fib6_info_destroy_rcu,
which it will access fib6_nh_release(f6i->fib6_nh);
However, f6i->fib6_nh doesn't have any refcount yet given the lack of allocation
causing the reported memory issue above.
Therefore, releasing the empty pointer directly instead would be the solution.
Fixes: f88d8ea67fbdb ("ipv6: Plumb support for nexthop object in a fib6_info") Fixes: 706ec91916462 ("ipv6: Fix nexthop refcnt leak when creating ipv6 route info") Signed-off-by: Coco Li <lixiaoyan@google.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Add missing exception tracing to XDP when a number of different
errors can occur. The support was only partial. Several errors
where not logged which would confuse the user quite a lot not
knowing where and why the packets disappeared.
Fixes: 21092e9ce8b1 ("ixgbevf: Add support for XDP_TX action") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Vishakha Jambekar <vishakha.jambekar@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The private helper data size cannot be updated. However, updates that
contain NFCTH_PRIV_DATA_LEN might bogusly hit EBUSY even if the size is
the same.
Add the ct helper extension only for unconfirmed conntrack. Skip rule
evaluation if the ct helper extension does not exist. Thus, you can
only create expectations from the first packet.
It should be possible to remove this limitation by adding a new action
to attach a generic ct helper to the first packet. Then, use this ct
helper extension from follow up packets to create the ct expectation.
While at it, add a missing check to skip the template conntrack too
and remove check for IPCT_UNTRACK which is implicit to !ct.
Fix current behavior of skipping template allocation in case the
ct action is in zone 0.
Skipping the allocation may cause the datapath ct code to ignore the
entire ct action with all its attributes (commit, nat) in case the ct
action in zone 0 was preceded by a ct clear action.
The ct clear action sets the ct_state to untracked and resets the
skb->_nfct pointer. Under these conditions and without an allocated
ct template, the skb->_nfct pointer will remain NULL which will
cause the tc ct action handler to exit without handling commit and nat
actions, if such exist.
For example, the following rule in OVS dp:
recirc_id(0x2),ct_state(+new-est-rel-rpl+trk),ct_label(0/0x1), \
in_port(eth0),actions:ct_clear,ct(commit,nat(src=10.11.0.12)), \
recirc(0x37a)
Will result in act_ct skipping the commit and nat actions in zone 0.
The change removes the skipping of template allocation for zone 0 and
treats it the same as any other zone.
clang doesn't like printing a 32-bit integer using %hX format string:
drivers/hid/i2c-hid/i2c-hid-core.c:994:18: error: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Werror,-Wformat]
client->name, hid->vendor, hid->product);
^~~~~~~~~~~
drivers/hid/i2c-hid/i2c-hid-core.c:994:31: error: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Werror,-Wformat]
client->name, hid->vendor, hid->product);
^~~~~~~~~~~~
Use an explicit cast to truncate it to the low 16 bits instead.
syzbot reported memory leak [1] when adding service with
HASHED flag. We should ignore this flag both from sockopt
and netlink provided data, otherwise the service is not
hashed and not visible while releasing resources.
zap_vma_ptes() is only available when CONFIG_MMU is set/enabled.
Without CONFIG_MMU, vfio_pci.o has build errors, so make
VFIO_PCI depend on MMU.
riscv64-linux-ld: drivers/vfio/pci/vfio_pci.o: in function `vfio_pci_mmap_open':
vfio_pci.c:(.text+0x1ec): undefined reference to `zap_vma_ptes'
riscv64-linux-ld: drivers/vfio/pci/vfio_pci.o: in function `.L0 ':
vfio_pci.c:(.text+0x165c): undefined reference to `zap_vma_ptes'
Fixes: 11c4cd07ba11 ("vfio-pci: Fault mmaps to enable vma tracking") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: kvm@vger.kernel.org Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210515190856.2130-1-rdunlap@infradead.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
snprintf() should be given the full buffer size, not one less. And it
guarantees nul-termination, so doing it manually afterwards is
pointless.
It's even potentially harmful (though probably not in practice because
CPER_REC_LEN is 256), due to the "return how much would have been
written had the buffer been big enough" semantics. I.e., if the bank
and/or device strings are long enough that the "DIMM location ..."
output gets truncated, writing to msg[n] is a buffer overflow.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Fixes: 3760cd20402d4 ("CPER: Adjust code flow of some functions") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
UEFI spec 2.9, p.108, table 4-1 lists the scenario that both attributes
are cleared with the description "No memory access protection is
possible for Entry". So we can have valid entries where both attributes
are cleared, so remove the check.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Fixes: 10f0d2f577053 ("efi: Implement generic support for the Memory Attributes table") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
When support for up to 10 temp sensors and for disabling automatic BIOS
fan control was added, noone updated the index values used for
disallowing fan support and fan type calls.
Fix those values.
Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20210513154546.12430-1-W_Armin@gmx.de Fixes: 1bb46a20e73b ("hwmon: (dell-smm) Support up to 10 temp sensors") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
syzbot discovered a bug in which an OOB access was being made because
an unsuitable key_idx value was wrongly considered to be acceptable
while deleting a key in nl80211_del_key().
Since we don't know the cipher at the time of deletion, if
cfg80211_validate_key_settings() were to be called directly in
nl80211_del_key(), even valid keys would be wrongly determined invalid,
and deletion wouldn't occur correctly.
For this reason, a new function - cfg80211_valid_key_idx(), has been
created, to determine if the key_idx value provided is valid or not.
cfg80211_valid_key_idx() is directly called in 2 places -
nl80211_del_key(), and cfg80211_validate_key_settings().
Reported-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Tested-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201204215825.129879-1-anant.thazhemadam@gmail.com Cc: stable@vger.kernel.org
[also disallow IGTK key IDs if no IGTK cipher is supported] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Zubin Mithra <zsm@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
sound/usb/mixer_quirks.c: In function ‘snd_microii_controls_create’:
sound/usb/mixer_quirks.c:1694:2: warning: ‘static’ is not at beginning
of declaration [-Wold-style-declaration]
1694 | const static usb_mixer_elem_resume_func_t resume_funcs[] = {
| ^~~~~
RTL8156 sends notifications about every 32ms.
Only display/log notifications when something changes.
This issue has been reported by others:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472
https://lkml.org/lkml/2020/8/27/1083
...
[785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
[785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN
[785962.929954] usb 1-1: Manufacturer: Realtek
[785962.929956] usb 1-1: SerialNumber: 000000001
[785962.991755] usbcore: registered new interface driver cdc_ether
[785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15
[785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384
[785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384
[785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15
[785963.019211] usbcore: registered new interface driver cdc_ncm
[785963.023856] usbcore: registered new interface driver cdc_wdm
[785963.025461] usbcore: registered new interface driver cdc_mbim
[785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0
[785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
...
This is about 2KB per second and will overwrite all contents of a 1MB
dmesg buffer in under 10 minutes rendering them useless for debugging
many kernel problems.
This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering
the majority of those logs useless too.
The tree checker checks the extent ref hash at read and write time to
make sure we do not corrupt the file system. Generally extent
references go inline, but if we have enough of them we need to make an
item, which looks like
However if key.offset collide with an unrelated extent reference we'll
simply key.offset++ until we get something that doesn't collide.
Obviously this doesn't match at tree checker time, and thus we error
while writing out the transaction. This is relatively easy to
reproduce, simply do something like the following
xfs_io -f -c "pwrite 0 1M" file
offset=2
for i in {0..10000}
do
xfs_io -c "reflink file 0 ${offset}M 1M" file
offset=$(( offset + 2 ))
done
And the sync will error out because we'll abort the transaction. The
magic values above are used because they generate hash collisions with
the first file in the main subvol.
The fix for this is to remove the hash value check from tree checker, as
we have no idea which offset ours should belong to.
Reported-by: Tuomas Lähdekorpi <tuomas.lahdekorpi@gmail.com> Fixes: 0785a9aacf9d ("btrfs: tree-checker: Add EXTENT_DATA_REF check") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Eric Sandeen [Wed, 7 Jul 2021 11:32:08 +0000 (13:32 +0200)]
UBUNTU: SAUCE: seq_file: Disallow extremely large seq buffer allocations
There is no reasonable need for a buffer larger than this,
and it avoids int overflow pitfalls.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Eric Sandeen <sandeen@redhat.com>
CVE-2021-33909 Fixes: 058504edd026 ("fs/seq_file: fallback to vmalloc allocation") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Juerg Haefliger <juergh@canonical.com> Acked-by: Benjamin M Romer <benjamin.romer@canonical.com>
This has been shown to cause failures with lxd, as the opener process had
different privileges than the writer, preventing lxd to be able to create
new processes inside a container when setting apparmor confinement.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Kamal Mostafa <kamal@canonical.com> Acked-by: Ian May <ian.may@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
UBUNTU: [Packaging]: Add kernel command line condition to hv-kvp-daemon service
linux-cloud-tools-common ships a service for hyper-v hypervisor. It is
known to be prohibited on certain instance types. Add a kernel command
line condition to skip starting this service there.
BugLink: https://bugs.launchpad.net/bugs/1932081 Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
cc: Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Quinn Tran [Wed, 2 Dec 2020 13:23:06 +0000 (05:23 -0800)]
scsi: qla2xxx: Fix N2N and NVMe connect retry failure
BugLink: https://bugs.launchpad.net/bugs/1860724
FC-NVMe target discovery failed when initiator wwpn < target wwpn in an N2N
(Direct Attach) config, where the driver was stuck on FCP PRLI mode and
failed to retry with NVMe PRLI.
Link: https://lore.kernel.org/r/20201202132312.19966-10-njavali@marvell.com Fixes: 84ed362ac40c ("scsi: qla2xxx: Dual FCP-NVMe target port support”) Fixes: 983f127603fa ("scsi: qla2xxx: Retry PLOGI on FC-NVMe PRLI failure”) Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
(cherry picked from commit 07a5f69248e3486e387c40af64793466371c7d91) Signed-off-by: Nilesh Javali <njavali@marvell.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Guilherme Piccoli <gpiccoli@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1860724
Driver was using a shorter timeout waiting for PLOGI from the peer in
point-to-point configurations. Some devices takes some time (~4 seconds) to
initiate the PLOGI. This peer initiating PLOGI is when the peer has a
higher P-WWN.
Increase the wait time based on N2N R_A_TOV.
Link: https://lore.kernel.org/r/20200929102152.32278-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
(cherry picked from commit 94eda2717826015a80ca271394c4378747de8936) Signed-off-by: Nilesh Javali <njavali@marvell.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Guilherme Piccoli <gpiccoli@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Quinn Tran [Wed, 26 Feb 2020 22:40:21 +0000 (14:40 -0800)]
scsi: qla2xxx: Set Nport ID for N2N
BugLink: https://bugs.launchpad.net/bugs/1860724
When transitioning from loop to N2N, stale NPort ID is not
re-assigned. Stale ID can collide with remote device. This patch will
re-assign NPort ID on N2N is detected.
Link: https://lore.kernel.org/r/20200226224022.24518-18-hmadhani@marvell.com Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
(cherry picked from commit ad8a260aa80d4dfa9588fd5d23b71ec922f61c8b) Signed-off-by: Nilesh Javali <njavali@marvell.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Guilherme Piccoli <gpiccoli@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Quinn Tran [Wed, 26 Feb 2020 22:40:18 +0000 (14:40 -0800)]
scsi: qla2xxx: Serialize fc_port alloc in N2N
BugLink: https://bugs.launchpad.net/bugs/1860724
For N2N, fc_port struct is created during report id acquisition. At
later time, the loop resync (fabric, n2n, loop) would trigger the rest
of the login using the created fc_port struct. The loop resync logic
can trigger another fc_port allocation if the 1st allocation was not
able to execute. This patch prevents the 2nd allocation trigger.
Link: https://lore.kernel.org/r/20200226224022.24518-15-hmadhani@marvell.com Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
(cherry picked from commit 11efe8755d73efd153d6459240866b6d52448f19) Signed-off-by: Nilesh Javali <njavali@marvell.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Guilherme Piccoli <gpiccoli@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
projects / mirror_ubuntu-focal-kernel.git / log