drm/amdgpu: set COMPUTE_PGM_RSRC1 for SGPR/VGPR clearing shaders
Otherwise, the SQ may skip some of the register writes, or shader waves may
be allocated where we don't expect them, so that as a result we don't actually
reset all of the register SRAMs. This can lead to spurious ECC errors later on
if a shader uses an uninitialized register.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Samuel Li [Wed, 18 Apr 2018 20:15:52 +0000 (16:15 -0400)]
drm/amdgpu: Enable scatter gather display support
Enables sg display if vram size <= THRESHOLD(256M); otherwise
still use vram as display buffer.
This patch fixed some potention issues introduced by change
"allow framebuffer in GART memory as well" due to CZ/ST hardware
limitation.
v2: Change default setting to auto.
v3: Move some logic from amdgpu_display_framebuffer_domains()
to pin function, suggested by Christian.
v4: Split into several patches.
v5: Drop module parameter for now.
Signed-off-by: Samuel Li <Samuel.Li@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samuel Li [Wed, 18 Apr 2018 20:26:18 +0000 (16:26 -0400)]
drm/amdgpu: Remove VRAM from shared bo domains.
This fixes an issue introduced by change "allow framebuffer in GART
memory as well" which could lead to a shared buffer ending up
pinned in vram. Use GTT if it is included in the domain, otherwise
return an error.
Signed-off-by: Samuel Li <Samuel.Li@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It returns supported domains for display, and domains actually used are to be
decided later when pinned.
Signed-off-by: Samuel Li <Samuel.Li@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Thu, 14 Dec 2017 07:33:53 +0000 (15:33 +0800)]
drm/amd/powerplay: use the flag to decide whether send gfxoff smc message
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Fri, 15 Dec 2017 06:34:57 +0000 (14:34 +0800)]
drm/amdgpu: set CGPG if gfxoff is enabled for raven
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Tue, 27 Feb 2018 05:43:59 +0000 (13:43 +0800)]
drm/amdgpu: fix to disable powergating in hw_fini
We need enable CGPG and GFXOFF together. If only enable one of them, this system
will get hang after startx (do draw command). So when gfxoff is disabled, it
also need disable CGPG after that.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Tue, 13 Mar 2018 10:39:48 +0000 (18:39 +0800)]
drm/amdgpu: it should disable gfxoff when system is going to suspend
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Tue, 13 Mar 2018 10:32:39 +0000 (18:32 +0800)]
drm/amd/powerplay: add control gfxoff enabling in late init
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Tue, 13 Mar 2018 09:59:12 +0000 (17:59 +0800)]
drm/amdgpu: clear gfxoff feature mask if the asic is not raven
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Tue, 27 Feb 2018 13:53:00 +0000 (21:53 +0800)]
drm/amdgpu: use pp_feature member to store the mask
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Fri, 2 Mar 2018 07:18:54 +0000 (15:18 +0800)]
drm/amd/powerplay: enable/disable gfxoff through smu
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Fri, 2 Mar 2018 07:10:52 +0000 (15:10 +0800)]
drm/amd/powerplay: add gfx off control function
gfx_off_control is used to be called for sending enabling/disabling gfxoff
message.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Fri, 2 Mar 2018 06:40:53 +0000 (14:40 +0800)]
drm/amdgpu: set gfxoff disabled by default
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Fri, 2 Mar 2018 06:16:06 +0000 (14:16 +0800)]
drm/amdgpu: add gfxoff feature mask
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Tue, 13 Mar 2018 07:13:46 +0000 (15:13 +0800)]
drm/amdgpu: move PP_FEATURE_MASK to amd_shared header
It will be used not only for powerplay but also on amdgpu part in future
patches. So move it into amd_shared header file.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Thu, 14 Dec 2017 05:38:13 +0000 (13:38 +0800)]
drm/amd/powerplay: send CGPG smc message if PG is enabled for raven
Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Wed, 6 Dec 2017 01:23:50 +0000 (09:23 +0800)]
drm/amdgpu: add setting powergating method for gfx9
Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Thu, 21 Dec 2017 08:13:02 +0000 (16:13 +0800)]
drm/amdgpu: revise init_rlc_save_restore_list behavior to support latest register_list_format/register_restore table
RLC save/restore list will be used on CGPG and GFXOFF function, it loads two bin
table of register_list_format/register_restore in RLC firmware.
Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Thu, 21 Dec 2017 07:48:27 +0000 (15:48 +0800)]
drm/amdgpu: cleanup init power gating function
Remove gfx_v9_0_enable_sck_slow_down_on_power_up/down and CP power gating
enabling functions because they only need to be called on setting power gating
behavior. We keep it in set_powergating callback to enable/disable PG in
late_init.
Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Thu, 21 Dec 2017 07:03:31 +0000 (15:03 +0800)]
drm/amdgpu: enter rlc safe mode before set cgpg
Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Mon, 22 Jan 2018 12:48:14 +0000 (20:48 +0800)]
drm/amdgpu: add save restore list cntl gpm and srm firmware support
RLC save/restore list cntl/gpm_mem/srm_mem ucodes are used for CGPG and gfxoff
function.
Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Mon, 22 Jan 2018 09:51:35 +0000 (17:51 +0800)]
drm/amdgpu: add new rlc firmware header format v2.1
Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Tue, 5 Dec 2017 10:48:48 +0000 (18:48 +0800)]
drm/amdgpu: update psp gfx if header
Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Sun, 25 Mar 2018 08:10:25 +0000 (10:10 +0200)]
drm/amdgpu: print DMA-buf status in debugfs
Just note if a BO was imported/exported.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: simplify bo_va list when vm bo update (v2)
v2: fix compiling warning
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Tue, 3 Apr 2018 17:05:03 +0000 (13:05 -0400)]
drm/amdgpu: optionally do a writeback but don't invalidate TC for IB fences
There is a new IB flag that enables this new behavior.
Full invalidation is unnecessary for RELEASE_MEM and doesn't make sense
when draw calls from two adjacent gfx IBs run in parallel. This will be
the new default for Mesa.
v2: bump the version
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if domain is illegal, we should return error.
v2:
remove duplicated domain checking.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: set preferred_domain independent of fallback handling
When GEM needs to fallback to GTT for VRAM BOs we still want the
preferred domain to be untouched so that the BO has a cance to move back
to VRAM in the future.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 17 Apr 2018 12:47:42 +0000 (14:47 +0200)]
drm/amdgpu: limit reg_write_reg_wait workaround to SRIOV v2
Turned out that this locks up some bare metal Vega10.
v2: fix stupid typo
Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/scheduler: move last_sched fence updating prior to job popping (v2)
Make sure main thread won't update last_sched fence when entity
is cleanup.
Fix a racing issue which is caused by putting last_sched fence
twice. Running vulkaninfo in tight loop can produce this issue
as seeing wild fence pointer.
v2: squash in build fix (Christian)
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/scheduler: always put last_sched fence in entity_fini
Fix the potential memleak since scheduler main thread always
hold one last_sched fence.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: use amdgpu_bo_param for amdgpu_bo_create v2
After that, we can easily add new parameter when need.
v2:
a) rebase.
b) Initialize struct amdgpu_bo_param, future new
member could only be used in some one case, but all member
should have its own initial value.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> (v1) Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Cc: christian.koenig@amd.com Cc: Felix.Kuehling@amd.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yongqiang Sun [Mon, 9 Apr 2018 20:15:20 +0000 (16:15 -0400)]
drm/amd/display: Use dig enable to determine fast boot optimization.
Linux doesn't know lid state, better to check dig enable
value from register.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yue Hin Lau [Mon, 9 Apr 2018 18:46:32 +0000 (14:46 -0400)]
drm/amd/display: add missing colorspace for set black color
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yongqiang Sun [Sat, 7 Apr 2018 01:38:10 +0000 (21:38 -0400)]
drm/amd/display: Check SCRATCH reg to determine S3 resume.
Use lid state only to determine fast boot optimization is not enough.
For S3/Resume, due to bios isn't involved in boot, eDP wasn't
light up, while lid state is open, if do fast boot optimization,
eDP panel will skip enable link and result in black screen after boot.
And becasue of bios isn't involved, no matter UEFI or Legacy boot,
BIOS_SCRATCH_3 value should be 0, use this to determine the case.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Thu, 5 Apr 2018 21:09:20 +0000 (17:09 -0400)]
drm/amd/display: Move DCC support functions into dchubbub
Added dchububu.h header file for common enum/struct definitions.
Added new interface functions get_dcc_compression_cap,
dcc_support_swizzle, dcc_support_pixel_format.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yongqiang Sun [Wed, 4 Apr 2018 21:27:18 +0000 (17:27 -0400)]
drm/amd/display: Check lid state to determine fast boot optimization.
For legacy enable boot up with lid closed, eDP information couldn't be
read correctly via SBIOS_SCRATCH_3 results in eDP cannot be light up
properly when open lid.
Check lid state instead can resolve the issue.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix regamma not affecting full-intensity color values
Hardware understands the regamma LUT as a piecewise linear function,
with points spaced exponentially along the range. We previously
programmed the LUT for range [2^-10, 2^0). This causes (normalized)
color values of 1 (=2^0) to miss the programmed LUT, and fall onto the
end region.
For DCE, the end region is extrapolated using a single (base, slope)
pair, using the max y-value from the last point in the curve as base.
This presents a problem, since this value affects all three color
channels. Scaling down the intensity of say - the blue regamma curve -
will not affect it's end region. This is especially noticiable when
using RedShift. It scales down the blue and green channels, but leaves
full-intensity colors unshifted.
Therefore, extend the range to cover [2^-10, 2^1) by programming another
hardware segment, containing only one point. That way, we won't be
hitting the end region.
Note that things are a bit different for DCN, since the end region can
be set per-channel.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Tue, 3 Apr 2018 15:23:11 +0000 (11:23 -0400)]
drm/amd/display: Move dp_pixel_encoding_type to stream_encoder include
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Thu, 29 Mar 2018 14:56:17 +0000 (10:56 -0400)]
drm/amd/display: fix brightness level after resume from suspend
Adding missing call to cache current backlight values.
Otherwise the brightness resets to default value on resume.
Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Tue, 3 Apr 2018 15:36:14 +0000 (11:36 -0400)]
drm/amd/display: dal 3.1.42
Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Thu, 12 Apr 2018 20:37:09 +0000 (16:37 -0400)]
drm/amd/display: Don't program bypass on linear regamma LUT
Even though this is required for degamma since DCE HW only supports a
couple predefined LUTs we can just program the LUT directly for regamma.
This fixes dark screens which occurs when we program regamma to bypass
while degamma is using srgb LUT.
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shirish S [Mon, 16 Apr 2018 06:47:57 +0000 (12:17 +0530)]
drm/amdgpu: defer test IBs on the rings at boot (V3)
amdgpu_ib_ring_tests() runs test IB's on rings at boot
contributes to ~500 ms of amdgpu driver's boot time.
This patch defers it and ensures that its executed
in amdgpu_info_ioctl() if it wasn't scheduled.
V2: Use queue_delayed_work() & flush_delayed_work().
V3: removed usage of separate wq, ensure ib tests is
run before enabling clockgating.
Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/pp: Adding a function to store cc6 data in SMU10
Filling the smu10_store_cc6_data based on the implementation
of Windows Powerplay.
There is an uncertainty with one of the parameters passed to the function
pstate_switch_disable - is not a part of smu10 private data structure.
So in the function its just ignored.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 19 Mar 2018 10:49:14 +0000 (11:49 +0100)]
drm/amdgpu: re-validate per VM BOs if required v2
If a per VM BO ends up in a allowed domain it never moves back into the
prefered domain.
v2: move the extra handling into amdgpu_vm_bo_update when we exit the
state machine. Make memory type handling generic.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Makes fallback handling to complicated. This is just a feature for the
GEM interface and shouldn't leak into the core BO create function.
The intended change to preserve the preferred domains is implemented in
a follow up patch.
Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Makes fallback handling to complicated. This is just a feature for the
GEM interface and shouldn't leak into the core BO create function.
Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Wed, 4 Apr 2018 07:37:35 +0000 (15:37 +0800)]
drm/amd/pp: Remove struct pp_gpu_power
Currently smu only calculate average gpu power in real time.
for vddc/vddci/max power,
User need to set start time and end time, firmware can calculate
the average vddc/vddci/max power. but the type of return values
is not unified. For Vi, return type is uint.
For vega, return type is float.
so this struct can't be suitable for all asics.
Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Wed, 4 Apr 2018 06:17:09 +0000 (14:17 +0800)]
drm/amd/pp: Refine get_gpu_power for VI
pkgpwr is the average gpu power of 100ms. it is calculated by
firmware in real time.
1. we can send smu message PPSMC_MSG_GetCurrPkgPwr to read currentpkgpwr directly.
2. On Fiji/tonga/bonaire/hawwii, without PPSMC_MSG_GetCurrPkgPwr support.
Send PPSMC_MSG_PmStatusLogStart/Sample to let smu write currentpkgpwr
to ixSMU_PM_STATUS_94. driver can read pkgpwr from ixSMU_PM_STATUS_94.
Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Wed, 4 Apr 2018 06:11:45 +0000 (14:11 +0800)]
Revert "drm/amd/powerply: fix power reading on Fiji"
we don't have limit of [50ms, 4sec] sampling period.
smu calculate average gpu power in real time.
we can read average gpu power through smu message or
read special register.
Emily Deng [Mon, 16 Apr 2018 02:07:02 +0000 (10:07 +0800)]
drm/gpu-sched: fix force APP kill hang(v4)
issue:
there are VMC page fault occurred if force APP kill during
3dmark test, the cause is in entity_fini we manually signal
all those jobs in entity's queue which confuse the sync/dep
mechanism:
1)page fault occurred in sdma's clear job which operate on
shadow buffer, and shadow buffer's Gart table is cleaned by
ttm_bo_release since the fence in its reservation was fake signaled
by entity_fini() under the case of SIGKILL received.
2)page fault occurred in gfx' job because during the lifetime
of gfx job we manually fake signal all jobs from its entity
in entity_fini(), thus the unmapping/clear PTE job depend on those
result fence is satisfied and sdma start clearing the PTE and lead
to GFX page fault.
fix:
1)should at least wait all jobs already scheduled complete in entity_fini()
if SIGKILL is the case.
2)if a fence signaled and try to clear some entity's dependency, should
set this entity guilty to prevent its job really run since the dependency
is fake signaled.
v2:
splitting drm_sched_entity_fini() into two functions:
1)The first one is does the waiting, removes the entity from the
runqueue and returns an error when the process was killed.
2)The second one then goes over the entity, install it as
completion signal for the remaining jobs and signals all jobs
with an error code.
v3:
1)Replace the fini1 and fini2 with better name
2)Call the first part before the VM teardown in
amdgpu_driver_postclose_kms() and the second part
after the VM teardown
3)Keep the original function drm_sched_entity_fini to
refine the code.
v4:
1)Rename entity->finished to entity->last_scheduled;
2)Rename drm_sched_entity_fini_job_cb() to
drm_sched_entity_kill_jobs_cb();
3)Pass NULL to drm_sched_entity_fini_job_cb() if -ENOENT;
4)Replace the type of entity->fini_status with "int";
5)Remove the check about entity->finished.
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Free VGA stolen memory as soon as possible.
Reserved VRAM is used to avoid overriding pre OS FB.
Once our display stack takes over we don't need the reserved
VRAM anymore.
v2:
Remove comment, we know actually why we need to reserve the stolen VRAM.
Fix return type for amdgpu_ttm_late_init.
v3:
Return 0 in amdgpu_bo_late_init, rebase on changes to previous patch
v4: rebase
v5:
For GMC9 reserve always just 9M and keep the stolem memory around
until GART table curruption on S3 resume is resolved.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 27 Mar 2018 22:10:56 +0000 (17:10 -0500)]
drm/amdgpu/gmc9: use amdgpu_ring_emit_reg_write_reg_wait in gpu tlb flush
Use amdgpu_ring_emit_reg_write_reg_wait. On engines that support it,
it provides a write and wait in a single packet which avoids a missed
ack if a world switch happens between the request and waiting for the
ack.
Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 27 Mar 2018 22:06:52 +0000 (17:06 -0500)]
drm/amdgpu/vcn1: add emit_reg_write_reg_wait ring callback
This adds support for writing and reading back using the
helper since the engines doesn't have a oneshot packet.
Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 27 Mar 2018 22:06:33 +0000 (17:06 -0500)]
drm/amdgpu/vce4: add emit_reg_write_reg_wait ring callback
This adds support for writing and reading back using the
helper since the engines doesn't have a oneshot packet.
Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 27 Mar 2018 22:05:19 +0000 (17:05 -0500)]
drm/amdgpu/uvd7: add emit_reg_write_reg_wait ring callback
This adds support for writing and reading back using the
helper since the engines doesn't have a oneshot packet.
Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 27 Mar 2018 21:51:41 +0000 (16:51 -0500)]
drm/amdgpu/sdma4: add emit_reg_write_reg_wait ring callback (v2)
This adds support for writing and reading back in a single
oneshot packet. This is needed to send a tlb invalidation
and wait for ack in a single operation.
v2: squash sdma hang fix into this patch
Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Alex Deucher [Tue, 27 Mar 2018 20:07:50 +0000 (15:07 -0500)]
drm/amdgpu/gfx9: add emit_reg_write_reg_wait ring callback (v2)
This adds support for writing and reading back in a single
oneshot packet. This is needed to send a tlb invalidation
and wait for ack in a single operation.
v2: squash the gfx ring stall fix
Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Alex Deucher [Tue, 27 Mar 2018 16:58:14 +0000 (11:58 -0500)]
drm/amdgpu: add emit_reg_write_reg_wait ring callback
This callback writes a value to a register and then reads
back another register and waits for a value in a single
operation.
Provide a helper function using two operations for engines
that don't support this opertion.
Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Shirish S <shirish.s@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Shirish S <shirish.s@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 9 Mar 2018 12:39:47 +0000 (13:39 +0100)]
drm/ttm: keep a reference to transfer pipelined BOs
Make sure the transfered BO is never destroy before the transfer BO.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Roger He <Hongbo.He@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / mirror_ubuntu-disco-kernel.git / log