Philipp Zabel [Thu, 10 Oct 2013 14:18:38 +0000 (16:18 +0200)]
staging: drm/imx: fix RGB formats, make ipu_cpmem_set_fmt take a drm_fourcc
The drm fourccs define formats not available as video4linux pixel formats,
such as DRM_FORMAT_BGR565, or the DRM_FORMAT_RGBX/BGRX variants.
Also, contrary to the v4l2 formats, the drm formats are well defined.
This patch also fixes the BGRA32 and RGB/RGB24 internal formats to use a
common internal representation.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Philipp Zabel [Thu, 10 Oct 2013 14:18:36 +0000 (16:18 +0200)]
staging: drm/imx: also allow to allocate only 2 DMFC slots for DP full plane
Connecting a 320x240 parallel display on i.MX6 resulted in an invalid DRDY
signal because the DC would not receive NL/EOL events on every line.
Reducing the allocated DMFC space from 4 slots (256 * 128-bit) to 2 slots
(128 * 128-bit) solved the problem.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to avoid this lockdep warning, remove the locking from
imx_drm_encoder_get_mux_id() and imx_drm_crtc_panel_format_pins().
Tested on a mx6sabrelite and mx53qsb.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a MMU dependency to configure the ZSMALLOC in
drivers/staging/zsmalloc/Kconfig. Without this patch, build
system can lead to build failure. This was observed during
randconfig testing, in which ZSMALLOC was enabled w/o MMU being
enabled. Following was the error:
LD vmlinux
drivers/built-in.o: In function `__zs_map_object':
drivers/staging/zsmalloc/zsmalloc-main.c:650: undefined reference to `map_vm_area'
make: *** [vmlinux] Error 1
This fixes the following sparse warnings:
* drivers/staging/rtl8188eu/core/rtw_cmd.c:221:5: warning:
symbol 'rtw_cmd_filter' was not declared. Should it be static?
* drivers/staging/rtl8188eu/core/rtw_cmd.c:1670:6: warning:
symbol 'dynamic_chk_wk_hdl' was not declared. Should it be static?
Rashika Kheria [Thu, 10 Oct 2013 18:14:41 +0000 (23:44 +0530)]
Staging: btmtk_usb: Fix line length exceeding 80 characters using min_t macro
This patch fixes the following checkpatch.pl warning in btmtk_usb.c:
WARNING: line over 80 characters in the file
by using kernel built_in min_t macro.
This fixes sparse warnings for functions and variables, e.g.:
* drivers/staging/gdm724x/gdm_mux.c:29:25: warning: symbol
'mux_rx_wq' was not declared. Should it be static?
Jovi Zhangwei [Wed, 9 Oct 2013 14:47:51 +0000 (07:47 -0700)]
staging: ktap: add to the kernel tree
This patch introduces ktap to staging tree.
ktap is a new script-based dynamic tracing tool for Linux,
it uses a scripting language and lets users trace the
Linux kernel dynamically. ktap is designed to give
operational insights with interoperability that allow
users to tune, troubleshoot and extend kernel and application.
It's similar with Linux Systemtap and Solaris Dtrace.
ktap have different design principles from Linux mainstream
dynamic tracing language in that it's based on bytecode,
so it doesn't depend upon GCC, doesn't require compiling
kernel module for each script, safe to use in production
environment, fulfilling the embedded ecosystem's tracing needs.
See ktap tutorial for more information:
http://www.ktap.org/doc/tutorial.html
The merit of putting this software in staging tree is
to make it more possible to get feedback from users
and thus polish the code.
Ian Abbott [Mon, 7 Oct 2013 14:51:58 +0000 (15:51 +0100)]
staging: comedi: avoid memleak for subdevice private
`comedi_alloc_spriv()` allocates private storage for a comedi subdevice
and sets the `SRF_FREE_SPRIV` flag in the `runflags` member of the
subdevice to allow the private storage to be automatically freed when
the comedi device is being cleaned up. Unfortunately, the flag gets
clobbered by `do_cmd_ioctl()` which calls
`comedi_set_subdevice_runflags()` with a mask value `~0` and only the
`SRF_USER` and `SRF_RUNNING` flags set, all the other SRF flags being
cleared.
Change the calls to `comedi_set_subdevice_runflags()` that currently use
a mask value of `~0` to use a more relevant mask value. For
`do_cmd_ioctl()`, the relevant SRF flags are `SRF_USER`, `SRF_ERROR` and
`SRF_RUNNING`. (At one time, `SRF_RT` would be included in that set of
flags, but it is no longer used.) For `comedi_alloc_spriv()` replace
the call to `comedi_set_subdevice_runflags()` with a simple
OR-assignment to avoid unnecessary use of a spin-lock.
Ian Abbott [Mon, 7 Oct 2013 15:50:06 +0000 (16:50 +0100)]
staging: comedi: remove 'settling_time_0' from subdevice
The `settling_time_0` member of `struct comedi_subdevice` can be set by
a low-level comedi driver and will be copied to user-space as part of
the information provided by the `COMEDI_SUBDINFO` ioctl. No comedi
driver has ever set it; it's just been left at its initial value of 0.
Remove it to save a bit of space, and behave as though it is 0.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 7 Oct 2013 15:50:05 +0000 (16:50 +0100)]
staging: comedi: remove unused 'channel flags' support
The `flags` and `flaglist` members of `struct comedi_subdevice` were
defined to supply "all-channel" flags via the `COMEDI_SUBDINFO` ioctl,
or "channel-specific" flags via the `COMEDI_CHANINFO` ioctls,
respectively. However, no comedi driver has ever set them.
It's not entirely clear how "all-channel" flags would differ from the
"subdevice" flags passed by `COMEDI_SUBDINFO`. It is conceivable that
"channel-specific" flags could be used to describe different analog
reference values (or whatever) supported by different channels.
Presumably these would use some sub-set of the `SDF_xxx` subdevice flag
values, or possibly the `CR_xxx` flag values that get packed into a
"chanspec" value (along with a channel number and range code). The
original intentions are lost in the mists of time.
For now, just remove the `flags` and `flaglist` members from `struct
comedi_subdevice` and behave as though they have been left at their
default values (0 or NULL) by the low-level comedi driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Mon, 7 Oct 2013 15:10:55 +0000 (10:10 -0500)]
staging: r8188eu: Fix skb leak in usb_read_port_complete()
In the completion routine for a usb_fill_bulk_urb() call, an skb is
leaked whenever the status of the USB transaction is not zero. A call
to skb_put() is needed to fix the problem.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes the following sparse warnings:
* drivers/staging/crystalhd/crystalhd_lnx.c:78:29: warning:
symbol 'chd_dec_alloc_iodata' was not declared. Should it be static?
* drivers/staging/crystalhd/crystalhd_lnx.c:99:6: warning:
symbol 'chd_dec_free_iodata' was not declared. Should it be static?
* drivers/staging/crystalhd/crystalhd_lnx.c:630:5: warning:
symbol 'chd_dec_pci_suspend' was not declared. Should it be static?
* drivers/staging/crystalhd/crystalhd_lnx.c:664:5: warning:
symbol 'chd_dec_pci_resume' was not declared. Should it be static?
Aaro Koskinen [Sun, 6 Oct 2013 20:35:15 +0000 (23:35 +0300)]
staging: octeon-ethernet: allow to set IRQ smp_affinity freely
Currently the driver assumes that CPU 0 is handling all the hard IRQs.
This is wrong in Linux SMP systems where user is allowed to assign to
hardware IRQs to any CPU. The driver will stop working if user sets
smp_affinity so that interrupts end up being handled by other than CPU
0. The patch fixes that.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eliminate cvmx_usb_internal_state, just use cvmx_usb_state everywhere.
This also enables to allocate only the needed amount of data for the
USB internal state, instead of always allocating 64 KB.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Sun, 6 Oct 2013 19:22:24 +0000 (22:22 +0300)]
staging: octeon-usb: merge cvmx-usb into octeon-hcd
cvmx-usb module provided Cavium "OS abstraction layer" for USB
functionality. To make this driver a proper Linux driver, we need to
refactor this layer out. By making all the code internal to the HCD
driver makes this task easier.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull SCSI target fixes from Nicholas Bellinger:
"Here are the outstanding target fixes queued up for v3.12-rc4 code.
The highlights include:
- Make vhost/scsi tag percpu_ida_alloc() use GFP_ATOMIC
- Allow sess_cmd_map allocation failure fallback to use vzalloc
- Fix COMPARE_AND_WRITE se_cmd->data_length bug with FILEIO backends
- Fixes for COMPARE_AND_WRITE callback recursive failure OOPs + non
zero scsi_status bug
- Make iscsi-target do acknowledgement tag release from RX context
- Setup iscsi-target with extra (cmdsn_depth / 2) percpu_ida tags
Also included is a iscsi-target patch CC'ed for v3.10+ that avoids
legacy wait_for_task=true release during fast-past StatSN
acknowledgement, and two other SRP target related patches that address
long-standing issues that are CC'ed for v3.3+.
Extra thanks to Thomas Glanzmann for his testing feedback with
COMPARE_AND_WRITE + EXTENDED_COPY VAAI logic"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iscsi-target; Allow an extra tag_num / 2 number of percpu_ida tags
iscsi-target: Perform release of acknowledged tags from RX context
iscsi-target: Only perform wait_for_tasks when performing shutdown
target: Fail on non zero scsi_status in compare_and_write_callback
target: Fix recursive COMPARE_AND_WRITE callback failure
target: Reset data_length for COMPARE_AND_WRITE to NoLB * block_size
ib_srpt: always set response for task management
target: Fall back to vzalloc upon ->sess_cmd_map kzalloc failure
vhost/scsi: Use GFP_ATOMIC with percpu_ida_alloc for obtaining tag
ib_srpt: Destroy cm_id before destroying QP.
target: Fix xop->dbl assignment in target_xcopy_parse_segdesc_02
Linus Torvalds [Sun, 6 Oct 2013 20:35:15 +0000 (13:35 -0700)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine fixes from Vinod Koul:
"Here is the slave dmanegine fixes. We have the fix for deadlock issue
on imx-dma by Michael and Josh's edma config fix along with author
change"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: imx-dma: fix callback path in tasklet
dmaengine: imx-dma: fix lockdep issue between irqhandler and tasklet
dmaengine: imx-dma: fix slow path issue in prep_dma_cyclic
dma/Kconfig: Make TI_EDMA select TI_PRIV_EDMA
edma: Update author email address
Merge tag 'iio-for-3.13c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Third set of new functionality and cleanups for IIO in the 3.13 cycle.
Driver New Functionality
* MXS - new interrupt driven touch screen support for i.MX23/28. Old
polled implementation dropped.
Driver Cleanups
* Some spi_sync boilerplate dropped by using spi_sync_transfer
* Some switching of drivers to the fractional type for scale reading.
Moves the ugly calculation into one place.
* Fix the documentation for *_voltage_scale which is never been correct
or as implemented in any driver.
* HID sensor hub and children : Open the sensor hub only when someone cares.
* hmc5843 - various minor
Jan Kara [Wed, 2 Oct 2013 14:27:51 +0000 (16:27 +0200)]
lustre: Convert ll_get_user_pages() to use get_user_pages_fast()
CC: Peng Tao <tao.peng@emc.com> Acked-by: Andreas Dilger <andreas.dilger@intel.com> CC: hpdd-discuss@lists.01.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sat, 5 Oct 2013 19:17:24 +0000 (12:17 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"This is a small collection of fixes, including a regression fix from
Liu Bo that solves rare crashes with compression on.
I've merged my for-linus up to 3.12-rc3 because the top commit is only
meant for 3.12. The rest of the fixes are also available in my master
branch on top of my last 3.11 based pull"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: Fix crash due to not allocating integrity data for a bioset
Btrfs: fix a use-after-free bug in btrfs_dev_replace_finishing
Btrfs: eliminate races in worker stopping code
Btrfs: fix crash of compressed writes
Btrfs: fix transid verify errors when recovering log tree
Linus Torvalds [Sat, 5 Oct 2013 19:11:40 +0000 (12:11 -0700)]
Merge tag 'gpio-v3.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Two patches for the OMAP driver, dealing with setting up IRQs properly
on the device tree boot path"
* tag 'gpio-v3.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio/omap: auto-setup a GPIO when used as an IRQ
gpio/omap: maintain GPIO and IRQ usage separately
Linus Torvalds [Sat, 5 Oct 2013 18:54:10 +0000 (11:54 -0700)]
Merge tag 'usb-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are none fixes for various USB driver problems. The majority are
gadget/musb fixes, but there are some new device ids in here as well"
* tag 'usb-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: chipidea: add Intel Clovertrail pci id
usb: gadget: s3c-hsotg: fix can_write limit for non-periodic endpoints
usb: gadget: f_fs: fix error handling
usb: musb: dsps: do not bind to "musb-hdrc"
USB: serial: option: Ignore card reader interface on Huawei E1750
usb: musb: gadget: fix otg active status flag
usb: phy: gpio-vbus: fix deferred probe from __init
usb: gadget: pxa25x_udc: fix deferred probe from __init
usb: musb: fix otg default state
Linus Torvalds [Sat, 5 Oct 2013 18:26:19 +0000 (11:26 -0700)]
Merge tag 'tty-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are two tty driver fixes for 3.12-rc4.
One fixes the reported regression in the n_tty code that a number of
people found recently, and the other one fixes an issue with xen
consoles that broke in 3.10"
* tag 'tty-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
xen/hvc: allow xenboot console to be used again
tty: Fix pty master read() after slave closes
Darrick J. Wong [Fri, 20 Sep 2013 03:37:07 +0000 (20:37 -0700)]
btrfs: Fix crash due to not allocating integrity data for a bioset
When btrfs creates a bioset, we must also allocate the integrity data pool.
Otherwise btrfs will crash when it tries to submit a bio to a checksumming
disk:
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
projects / mirror_ubuntu-hirsute-kernel.git / log