Chris Wilson [Fri, 15 Jan 2016 16:51:46 +0000 (16:51 +0000)]
drm/i915: Seal busy-ioctl uABI and prevent leaking of internal ids
Tvrtko was looking through the execbuffer-ioctl and noticed that the
uABI was tightly coupled to our internal engine identifiers. Close
inspection also revealed that we leak those internal engine identifiers
through the busy-ioctl, and those internal identifiers already do not
match the user identifiers. Fortuitiously, there is only one user of the
set of busy rings from the busy-ioctl, and they only wish to choose
between the RENDER and the BLT engines.
Let's fix the userspace ABI while we still can.
v2: Update the uAPI documentation to explain the identifiers.
Tvrtko Ursulin [Fri, 15 Jan 2016 15:12:50 +0000 (15:12 +0000)]
drm/i915: Decouple execbuf uAPI from internal implementation
At the moment execbuf ring selection is fully coupled to
internal ring ids which is not a good thing on its own.
This dependency is also spread between two source files and
not spelled out at either side which makes it hidden and
fragile.
This patch decouples this dependency by introducing an explicit
translation table of execbuf uAPI to ring id close to the only
call site (i915_gem_do_execbuffer).
This way we are free to change driver internal implementation
details without breaking userspace. All state relating to the
uAPI is now contained in, or next to, i915_gem_do_execbuffer.
As a side benefit, this patch decreases the compiled size
of i915_gem_do_execbuffer.
v2: Extract ring selection into eb_select_ring. (Chris Wilson)
Chris Wilson [Wed, 20 Jan 2016 13:43:35 +0000 (15:43 +0200)]
drm/i915: Use ordered seqno write interrupt generation on gen8+ execlists
Broadwell and later currently use the same unordered command sequence to
update the seqno in the HWS status page and then assert the user
interrupt. We should apply the w/a from legacy (where we do an mmio
read to delay the seqno read after the interrupt), but this is not
enough to enforce coherent seqno visibilty on Skylake. Rather than
search for the proper post-interrupt seqno barrier, use a strongly
ordered command sequence to write the seqno, then assert the user
interrupt from the ring.
v2: Move around the wa tail dwords to avoid adding duplicate code.
v3: Add references, comments on workarounds and bit5 check.
Mika Kuoppala [Wed, 20 Jan 2016 10:32:23 +0000 (12:32 +0200)]
drm/i915: Limit the auto arming of mmio debugs on vlv/chv
The capability to detect unclaimed register access was
recently introduced for vlv/chv platforms. Apparently
there are plenty of unclaimed access on these platforms,
resulting in new dmesg warns. But as we are trying to form
a beachhead for CI/Bat, all new warns are adding to the
noise and thus not desirable at this point in time.
Make it so that if in these platforms the automatic arming
was responsible for mmio_debug enabling, ignore the warns.
If user/dev wants to fix these, he can still do so by
i915.mmio_debug=1234.
Daniel Vetter [Tue, 19 Jan 2016 20:00:56 +0000 (21:00 +0100)]
drm/i915: Tune down "GT register while GT waking disabled" message
We've had this since forever, and's randomly reporting issues and as
such causing piles&piles of CI noise. Mika is working on proper debug
infrastructure for this, and on fixing this properly.
Dave Gordon [Tue, 19 Jan 2016 19:02:55 +0000 (19:02 +0000)]
drm/i915: tidy up a few leftovers
There are a few bits of code which the transformations implemented by
the previous patch reveal to be suboptimal, once the notion of a per-
ring default context has gone away. So this tidies up the leftovers.
It could have been squashed into the previous patch, but that would have
made that patch less clearly a simple transformation. In particular, any
change which alters the code block structure or indentation has been
deferred into this separate patch, because such things tend to make
diffs more difficult to read.
Dave Gordon [Tue, 19 Jan 2016 19:02:54 +0000 (19:02 +0000)]
drm/i915: abolish separate per-ring default_context pointers
Now that we've eliminated a lot of uses of ring->default_context,
we can eliminate the pointer itself.
All the engines share the same default intel_context, so we can just
keep a single reference to it in the dev_priv structure rather than one
in each of the engine[] elements. This make refcounting more sensible
too, as we now have a refcount of one for the one pointer, rather than
a refcount of one but multiple pointers.
From an idea by Chris Wilson.
v2: transform an extra instance of ring->default_context introduced by 42f1cae8c drm/i915: Restore inhibiting the load of the default context
That patch's commentary includes:
v2: Mark the global default context as uninitialized on GPU reset so
that the context-local workarounds are reloaded upon re-enabling
The code implementing that now also benefits from the replacement of
the multiple (per-ring) pointers to the default context with a single
pointer to the unique kernel context.
Dave Gordon [Tue, 19 Jan 2016 19:02:53 +0000 (19:02 +0000)]
drm/i915: simplify allocation of driver-internal requests
There are a number of places where the driver needs a request, but isn't
working on behalf of any specific user or in a specific context. At
present, we associate them with the per-engine default context. A future
patch will abolish those per-engine context pointers; but we can already
eliminate a lot of the references to them, just by making the allocator
allow NULL as a shorthand for "an appropriate context for this ring",
which will mean that the callers don't need to know anything about how
the "appropriate context" is found (e.g. per-ring vs per-device, etc).
So this patch renames the existing i915_gem_request_alloc(), and makes
it local (static inline), and replaces it with a wrapper that provides
a default if the context is NULL, and also has a nicer calling
convention (doesn't require a pointer to an output parameter). Then we
change all callers to use the new convention:
OLD:
err = i915_gem_request_alloc(ring, user_ctx, &req);
if (err) ...
NEW:
req = i915_gem_request_alloc(ring, user_ctx);
if (IS_ERR(req)) ...
OLD:
err = i915_gem_request_alloc(ring, ring->default_context, &req);
if (err) ...
NEW:
req = i915_gem_request_alloc(ring, NULL);
if (IS_ERR(req)) ...
Ville Syrjälä [Tue, 19 Jan 2016 16:23:17 +0000 (18:23 +0200)]
drm/i915: Fix NULL plane->fb oops on SKL
In this atomic age, we can't trust the plane->fb pointer anymore.
It might get update too late. Instead we are supposed to use the
plane_state->fb pointer instead. Let's do that in
intel_plane_obj_offset() and avoid problems from dereferencing the
potentially stale plane->fb pointer.
Paulo found this with 'kms_frontbuffer_tracking --show-hidden --run-subtest nop-1p-rte'
but it can be reproduced with just plain old kms_setplane.
I was too lazy to bisect this, so not sure exactly when it broke. The
most obvious candidate
commit ce7f17285639 ("drm/i915: Fix i915_ggtt_view_equal to handle rotation correctly")
was actually still fine, so it must have broken some time after that.
This commit was triggering some FIFO underrun warnings on ILK-IVB
platforms (but surprisingly not on HSW/BDW that share more or less the
same codepaths). These underruns were caught by the continuous
integration (CI) system and could be reproduced consistently when
running the basic acceptance tests (BAT) on the affected platforms.
Note that this revert will cause a visible regression for some
end-users; the "flicker when mouse moves between monitors in X" issue
that was reported before this patch was merged will now return. However
regressions that are visible to CI have higher priority since they
prevent proper testing of future patches on those platforms. Hopefully
we'll be able to figure out the cause of the underruns quickly and
remerge an improved version of this patch to fix the regression.
Arun Siluvery [Mon, 18 Jan 2016 15:59:36 +0000 (15:59 +0000)]
drm/i915/gen9: Correct max save/restore register count during gpu reset with GuC
In GuC submission mode, driver has to provide a list of registers to be
save/restored during gpu reset, make the max no. of registers value consistent
with that of the value defined in FW. If they are not in sync then register
save/restore during gpu reset won't work as expected.
Chris Wilson [Wed, 13 Jan 2016 17:38:15 +0000 (17:38 +0000)]
drm/i915: Demote user facing DMC firmware load failure message
This is an expected error given the lack of the firmware so emit it at
KERN_NOTICE and not KERN_ERROR. Also include the firmware URL in the
user facing message so that the user can investigate and fix the issue
on their own, and also explain the consequence in plain language.
The complete failure message, including the first line from the firmware
loader, becomes
i915 0000:00:02.0: Direct firmware load for i915/skl_dmc_ver1.bin failed with error -2
i915 0000:00:02.0: Failed to load DMC firmware [https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling runtime power management.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Sunil Kamath <sunil.kamath@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452706695-13518-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 15 Oct 2015 14:01:58 +0000 (17:01 +0300)]
drm/i915: skl_update_scaler() wants a rotation bitmask instead of bit number
Pass BIT(DRM_ROTATE_0) instead of DRM_ROTATE_0 to skl_update_scaler().
The former is a mask, the latter just the bit number.
Fortunately the only thing skl_update_scaler() does with the rotation
is check if it's 90/270 degrees or not, and so in this case it would
still do the right thing.
Ville Syrjälä [Fri, 15 Jan 2016 18:46:53 +0000 (20:46 +0200)]
drm/i915: Don't reject primary plane windowing with color keying enabled on SKL+
On SKL+ plane scaling is mutually exclusive with color keying. The code
check for this, but during some refactoring the code got changed to
also reject primary plane windowing when color keying is used. There is
no such restriction in the hardware, so restore the original logic.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 061e4b8d650a ("drm/i915: clean up atomic plane check functions, v2.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452883613-28549-1-git-send-email-ville.syrjala@linux.intel.com Cc: stable@vger.kernel.org Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Alex Dai [Wed, 13 Jan 2016 19:01:50 +0000 (11:01 -0800)]
drm/i915/guc: Fix a memory leak where guc->execbuf_client is not freed
During driver unloading, the guc_client created for command submission
needs to be released to avoid memory leak.
The struct_mutex needs to be held before tearing down GuC.
v1: Move i915_guc_submission_disable out of i915_guc_submission_fini and
take struct_mutex lock before release GuC client. (Dave Gordon)
v2: Add the locking for failure case in guc_fw_fetch. (Dave Gordon)
Add i915_guc_submission_fini for failure case in intel_guc_ucode_load.
Tvrtko Ursulin [Fri, 15 Jan 2016 17:12:45 +0000 (17:12 +0000)]
drm/i915: Cache LRC state page in the context
LRC lifetime is well defined so we can cache the page pointing
to the object backing store in the context in order to avoid
walking over the object SG page list from the interrupt context
without the big lock held.
v2: Also cache the mapping. (Chris Wilson)
v3: Unmap on the error path.
v4: No need to cache the page. (Chris Wilson)
v5: No need to dirty the page on unpin. (Chris Wilson)
v6: kmap() cannot fail and use kmap_to_page to simplify unpin.
(Chris Wilson)
Tvrtko Ursulin [Fri, 15 Jan 2016 15:10:27 +0000 (15:10 +0000)]
drm/i915: Do not call API requiring struct_mutex where it is not available
LRC code was calling GEM API like i915_gem_obj_ggtt_offset from
places where the struct_mutex cannot be grabbed (irq handlers).
To avoid that this patch caches some interesting bits and values
in the engine and context structures.
Some usages are also removed where they are not needed like a
few asserts which are either impossible or have been checked
already during engine initialization.
Side benefit is also that interrupt handlers and command
submission stop evaluating invariant conditionals, like what
Gen we are running on, on every interrupt and every command
submitted.
This patch deals with logical ring context id and descriptors
while subsequent patches will deal with the remaining issues.
v2:
* Cache the VMA instead of the address. (Chris Wilson)
* Incorporate Dave Gordon's good comments and function name.
v3:
* Extract ctx descriptor template to a function and group
functions dealing with ctx descriptor & co together near
top of the file. (Dave Gordon)
Dave Airlie [Sun, 17 Jan 2016 21:02:19 +0000 (07:02 +1000)]
Merge tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel into drm-next
misc i915 fixes all over the place.
* tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel:
drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page
drm/i915: Widen return value for reservation_object_wait_timeout_rcu to long.
drm/i915: intel_hpd_init(): Fix suspend/resume reprobing
drm/i915: shut up gen8+ SDE irq dmesg noise, again
drm/i915: Restore inhibiting the load of the default context
drm/i915: Tune down rpm wakelock debug checks
drm/i915: Avoid writing relocs with addresses in non-canonical form
drm/i915: Move Braswell stop_machine GGTT insertion workaround
Dave Airlie [Sun, 17 Jan 2016 21:01:16 +0000 (07:01 +1000)]
Merge tag 'topic/drm-misc-2016-01-17' of git://anongit.freedesktop.org/drm-intel into drm-next
Since your main drm-next pull isn't out of the door yet I figured I might
as well flush out drm-misc instead of delaying for 4.6. It's really just
random stuff all over, biggest thing probably connector_mask tracking from
Maarten.
* tag 'topic/drm-misc-2016-01-17' of git://anongit.freedesktop.org/drm-intel: (24 commits)
drm/fb_cma_helper: Remove implicit call to disable_unused_functions
drm/sysfs: use kobj_to_dev()
drm/i915: Init power domains early in driver load
drm: Do not set connector->encoder in drivers
apple-gmux: Add initial documentation
drm: move MODULE_PARM_DESC to other file
drm/edid: index CEA/HDMI mode tables using the VIC
drm/atomic: Remove drm_atomic_connectors_for_crtc.
drm/i915: Update connector_mask during readout, v2.
drm: Remove opencoded drm_gem_object_release_handle()
drm: Do not set outparam on error during GEM handle allocation
drm/docs: more leftovers from the big vtable documentation pile
drm/atomic-helper: Reject legacy flips on a disabled pipe
drm/atomic: add connector mask to drm_crtc_state.
drm/tegra: Use __drm_atomic_helper_reset_connector for subclassing connector state, v2.
drm/atomic: Add __drm_atomic_helper_connector_reset, v2.
drm/i915: Set connector_state->connector using the helper.
drm: Use a normal idr allocation for the obj->name
drm: Only bump object-reference count when adding first handle
drm: Balance error path for GEM handle allocation
...
Maxime Ripard [Thu, 14 Jan 2016 15:24:56 +0000 (16:24 +0100)]
drm/fb_cma_helper: Remove implicit call to disable_unused_functions
The drm_fbdev_cma_init function always calls the
drm_helper_disable_unused_functions. Since it's part of the usual probe
process, all the drivers using that helper will end up having their encoder
and CRTC disable functions called at probe if their device has not been
reported as enabled.
This could be fixed by reading out from the registers the current state of
the device if it is enabled, but even that will not handle the case where
the device is actually disabled.
Moreover, the drivers using the atomic modesetting expect that their enable
and disable callback to be called when the device is already enabled or
disabled (respectively).
We can however fix this issue by moving the call to
drm_helper_disable_unused_functions out of drm_fbdev_cma_init and make the
drivers needing it (all the drivers calling drm_fbdev_cma_init and not
using the atomic modesetting) explicitly call it.
Jani Nikula [Wed, 13 Jan 2016 14:35:20 +0000 (16:35 +0200)]
drm/i915/dp: fall back to 18 bpp when sink capability is unknown
Per DP spec, the source device should fall back to 18 bpp, VESA range
RGB when the sink capability is unknown. Fix the color depth
clamping. 18 bpp color depth should ensure full color range in automatic
mode.
The clamping has been HDMI specific since its introduction in
Jani Nikula [Thu, 14 Jan 2016 15:12:07 +0000 (17:12 +0200)]
drm/i915/bios: Fix the sequence size calculations for MIPI seq v3
Two errors in a single line. The size was read from the wrong offset,
and the end index didn't take the five bytes for sequence byte and size
of sequence into account. Fix it all, and break up the calculations a
bit to make it clearer.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-and-tested-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: 2a33d93486f2 ("drm/i915/bios: add support for MIPI sequence block v3") Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452784327-27258-1-git-send-email-jani.nikula@intel.com
Francisco Jerez [Thu, 14 Jan 2016 02:59:39 +0000 (18:59 -0800)]
drm/i915: Make sure DC writes are coherent on flush.
We need to set the DC FLUSH PIPE_CONTROL bit on Gen7+ to guarantee
that writes performed via the HDC are visible in memory. Fixes an
intermittent failure in a Piglit test that writes to a BO from a
shader using GL atomic counters (implemented as HDC untyped atomics)
and then expects the memory to read back the same value after mapping
it on the CPU.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91298 Tested-by: Mark Janes <mark.a.janes@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Francisco Jerez <currojerez@riseup.net> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452740379-3194-1-git-send-email-currojerez@riseup.net Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Thu, 14 Jan 2016 12:53:35 +0000 (14:53 +0200)]
drm/i915: Use the active wm config for merging on ILK-BDW
ilk_program_watermarks() is supposed to merge the active watermarks from
all pipes. Thus we need to use the active config too instead of some
precomputed stuff.
Ville Syrjälä [Thu, 14 Jan 2016 12:53:34 +0000 (14:53 +0200)]
drm/i915: Start WM computation from scratch on ILK-BDW
ilk_compute_pipe_wm() assumes as zeroed pipe_wm structure when it
starts. We used to pass such a zeroed struct in, but this got broken
when the pipe_wm structure got embedded in the crtc state.
To fix it without too much fuzz, we need to resort to a memset().
Dave Airlie [Wed, 13 Jan 2016 21:59:21 +0000 (07:59 +1000)]
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
This 2nd pull request includes the following,
- add configurable plane support and relevant cleanups.
- fixup kernel panic issue at drm releasing.
- remove unnecessary codes.
This has been delayed to resolve a critical issue - which incurrs
a kernel panic when driver is released - and review it.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: fix kernel panic issue at drm releasing
drm/exynos: crtc: do not wait for the scanout completion
drm/exynos: mixer: properly update all planes on the same vblank event
drm/exynos: crtc: rework atomic_{begin,flush}
drm/exynos: mixer: unify a check for video-processor window
drm/exynos: mixer: also allow ARGB1555 and ARGB4444
drm/exynos: mixer: refactor layer setup
drm/exynos: mixer: remove all static blending setup
drm/exynos: mixer: set window priority based on zpos
drm/exynos: make zpos property configurable
drm/exynos: rename zpos to index
Dave Airlie [Wed, 13 Jan 2016 21:58:06 +0000 (07:58 +1000)]
Merge branch 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux into drm-next
etnaviv fixes.
* 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux:
drm/etnaviv: fix workaround for GC500
drm/etnaviv: unlock on error in etnaviv_gem_get_iova()
drm/vmwgfx: Fix a width / pitch mismatch on framebuffer updates
When the framebuffer is a vmwgfx dma buffer and a proxy surface is
created, the vmw_kms_update_proxy() function requires that the proxy
surface width and the framebuffer pitch are compatible, otherwise
display corruption occurs as seen in gnome-shell/native with software
3D. Since the framebuffer pitch is determined by user-space, allocate
a proxy surface the width of which is based on the framebuffer pitch
rather than on the framebuffer width.
Cc: <stable@vger.kernel.org> Reported-by: Raphael Hertzog <buxy@kali.org> Tested-by: Mati Aharoni <muts@kali.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
With CONFIG_SMP=n and CONFIG_DEBUG_SPINLOCK=y the vmwgfx kernel module
would unconditionally throw a bug when checking for a held spinlock
in the command buffer code. Fix this by using a lockdep check.
Cc: <stable@vger.kernel.org> Reported-and-tested-by: Tetsuo Handa <penguin-kernel@i-love-sakura.ne.jp> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Arnd Bergmann [Wed, 13 Jan 2016 13:48:13 +0000 (14:48 +0100)]
drm: nouveau: fix nouveau_debugfs_init prototype
The new debugfs initialization code fails to build when CONFIG_DEBUG_FS
is disabled:
In file included from /git/arm-soc/drivers/gpu/drm/nouveau/nouveau_drm.c:57:0:
drivers/gpu/drm/nouveau/nouveau_debugfs.h: In function 'nouveau_debugfs_init':
drivers/gpu/drm/nouveau/nouveau_debugfs.h:37:29: error: parameter name omitted
nouveau_debugfs_init(struct nouveau_drm *)
This fixes the prototypes so we can build it again.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b126a200e9db ("drm/nouveau/debugfs: we need a ctrl object for debugfs") Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 13 Jan 2016 21:56:07 +0000 (07:56 +1000)]
Merge branch 'drm-next-4.5' of git://people.freedesktop.org/~agd5f/linux into drm-next
A few more misc things for radeon and amdgpu for 4.5:
- TTM fixes for imported buffers
- amdgpu fixes to avoid -ENOMEM in CS ioctl
- CZ UVD and VCE clock force options for debugging video issues
- A couple of ACP prerequisites
- Misc fixes
* 'drm-next-4.5' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: validate duplicates first
drm/amdgpu: move VM page tables to the LRU end on CS v2
drm/ttm: add ttm_bo_move_to_lru_tail function v2
drm/ttm: fix adding foreign BOs to the swap LRU
drm/ttm: fix adding foreign BOs to the LRU during init v2
drm/radeon: use kobj_to_dev()
drm/amdgpu: use kobj_to_dev()
drm/amdgpu/cz: force vce clocks when sclks are forced
drm/amdgpu/cz: force uvd clocks when sclks are forced
drm/amdgpu/cz: add code to enable forcing VCE clocks
drm/amdgpu/cz: add code to enable forcing UVD clocks
drm/amdgpu: fix lost sync_to if scheduler is enabled.
drm/amd/powerplay: fix static checker warning for return meaningless value.
drm/amdgpu: add irq domain support
drm/amdgpu/cgs: add an interface to access PCI resources
Christian König [Mon, 11 Jan 2016 14:35:22 +0000 (15:35 +0100)]
drm/amdgpu: validate duplicates first
Most VM BOs end up in the duplicates list, validate it
first make -ENOMEM less likely.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <David1.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 11 Jan 2016 14:35:20 +0000 (15:35 +0100)]
drm/ttm: add ttm_bo_move_to_lru_tail function v2
This allows the drivers to move a BO to the end of the LRU
without removing and adding it again.
v2: Make it more robust, handle pinned and swapable BOs as well.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 11 Jan 2016 14:35:19 +0000 (15:35 +0100)]
drm/ttm: fix adding foreign BOs to the swap LRU
It doesn't make any sense to try to swap out imported BOs.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 11 Jan 2016 14:35:18 +0000 (15:35 +0100)]
drm/ttm: fix adding foreign BOs to the LRU during init v2
If we import a BO with an external reservation object we don't
reserve/unreserve it. So we never add it to the LRU causing a possible
denial of service.
v2: fix typo in commit message
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ville Syrjälä [Tue, 12 Jan 2016 19:08:37 +0000 (21:08 +0200)]
drm/i915: Refactor intel_surf_alignment()
Pull the code to determine the surface alignment for both linear and
tiled surfaces into a separate function intel_surf_alignment(). This
will be used not only for the vma alignment but actually aligning
the plane SURF once SKL+ starts using intel_compute_page_offset()
(since SKL+ needs >4K alignment for tiled surfaces too).
Since intel_gen4_compute_page_offset() can now handle tiling formats
all the way down to gen2, rename it to intel_compute_tile_offset().
Not that we actually use it on gen2/3 since there's no DSPSURF etc.
registers which would take a page aligned address.
Ville Syrjälä [Tue, 12 Jan 2016 19:08:35 +0000 (21:08 +0200)]
drm/i915: Use intel_tile_{size,width,height}() in intel_gen4_compute_page_offset()
Make intel_gen4_compute_page_offset() ready for other tiling formats
besied X-tile by getting the tile dimensions through
intel_tile_{size,width,height}().
Ville Syrjälä [Tue, 12 Jan 2016 19:08:34 +0000 (21:08 +0200)]
drm/i915: change intel_fill_fb_ggtt_view() to use the real tile size
Use the actual tile size as to compute stuff in
intel_fill_fb_ggtt_view() instead of assuming it's PAGE_SIZE. I suppose
it doesn't matter since we don't use the results on gen2 platforms
where the tile size is 2k.
Ville Syrjälä [Tue, 12 Jan 2016 19:08:33 +0000 (21:08 +0200)]
drm/i915: Redo intel_tile_height() as intel_tile_size() / intel_tile_width()
I find more usual to think about tile widths than heights, so changing
the intel_tile_height() to calculate the tile height as
tile_size/tile_width is easier than the opposite to the poor brain.
v2: Reorder arguments for consistency
Constify dev_priv arguments
Ville Syrjälä [Tue, 12 Jan 2016 19:08:32 +0000 (21:08 +0200)]
drm/i915: Factor out intel_tile_width()
Pull the tile width calculations from intel_fb_stride_alignment() into a
new function intel_tile_width().
Also take the opportunity to pass aroun dev_priv instead of dev to
intel_fb_stride_alignment().
v2: Reorder argumnents to be more consistent with other functions
Change intel_fb_stride_alignment() to accept dev_priv instead of dev
v3: Deal with Y tilling (Daniel)
gmbus also needs the power domain infrastructure right from the start,
since as soon as we register the i2c controllers someone can use them.
v2: Adjust cleanup paths too (Chris).
v3: Rebase onto -nightly (totally bogus tree I had lying around) and
also move dpio init head (Ville).
v4: Ville instead suggested to move gmbus setup later in the sequence,
since it's only needed by the modeset code.
v5: Move even close to the actual user, right next to the comment that
states where we really need gmbus (and interrupts!).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: ac9b8236551d ("drm/i915: Introduce a gmbus power domain") Cc: stable@vger.kernel.org
References: http://www.spinics.net/lists/intel-gfx/msg83075.html Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452682528-19437-1-git-send-email-daniel.vetter@ffwll.ch Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thierry Reding [Mon, 16 Nov 2015 17:19:53 +0000 (18:19 +0100)]
drm: Do not set connector->encoder in drivers
An encoder is associated with a connector by the DRM core as a result of
setting up a configuration. Drivers using the atomic or legacy helpers
should never set up this link, even if it is a static one.
While at it, try to catch this kind of error in the future by adding a
WARN_ON() in drm_mode_connector_attach_encoder(). Note that this doesn't
cover all the cases, since drivers could set this up after attaching.
Drivers that use the atomic helpers will get a warning later on, though,
so hopefully the two combined cover enough to help people avoid this in
the future.
Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Mark yao <mark.yao@rock-chips.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1447694393-24700-1-git-send-email-thierry.reding@gmail.com
Tvrtko Ursulin [Tue, 12 Jan 2016 17:32:34 +0000 (17:32 +0000)]
drm/i915: Extract vfunc setup from logical ring initializers
Majority of them was duplicated code and only render ring
currently overrides some of them. We can save some lines of
code and also take away the confusion on why bsd2 did not
do the seqno coherency workaround. (VCS2 ring does not exist
on platforms where workaround is needed but that was not
documented in the code.)
Tvrtko Ursulin [Tue, 12 Jan 2016 16:04:06 +0000 (16:04 +0000)]
drm/i915/gen8: Tidy display interrupt processing
One bugfix and a few tidy-ups:
* Pipe fault logging was broken on Gen9+.
* Removed some unnecessary local variables.
* Removed unnecessary initializers.
* Decreased pipe iir block indentation level.
* Grouped variable initialization close to use sites.
Michel Thierry [Mon, 11 Jan 2016 11:39:27 +0000 (11:39 +0000)]
drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page
Kernel and userspace are able to handle 4GB (1<<32) address space range,
but "A32 Stateless Model" is not. According to documentation, A32 accesses
are based on General State Base Address and bound checking is in place.
Because size field (instruction State Base Address) limitation, it is not
possible to address full 4GB memory region.
A32 Stateless Model is used by some libraries and without this patch, the
last page of 4GB address space is not accessible in 32bit processes.
drm/i915: Widen return value for reservation_object_wait_timeout_rcu to long.
This fixes a spurious warning from an integer overflow on 64-bits systems.
The function may return MAX_SCHEDULE_TIMEOUT which gets truncated to -1.
Explicitly handling this by casting to lret fixes it. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reported-and-tested-by: Joseph Yasi <joe.yasi@gmail.com> Tested-by: Andreas Reis <andreas.reis@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: drm-intel-fixes@lists.freedesktop.org Fixes: 3c28ff22f6e20c ("i915: wait for fence in prepare_plane_fb") Link: http://patchwork.freedesktop.org/patch/msgid/5666EEC8.2000403@linux.intel.com
(cherry picked from commit bcf8be279c79df6a8a17d9c3e1f9bc926444a87c) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This fixes reprobing of display connectors on resume. After some
talking with danvet on IRC, I learned that calling
drm_helper_hpd_irq_event() does actually trigger a full reprobe of each
connector's status. It turns out this is the actual reason reprobing on
resume hasn't been working (this was observed on a T440s):
- We call hpd_init()
- We check each connector for a couple of things before marking
connector->polled with DRM_CONNECTOR_POLL_HPD, one of which is an
active encoder. Of course, a disconnected port won't have an
active encoder, so we don't add the flag to any of the
connectors.
- We call drm_helper_hpd_irq_event()
- drm_helper_irq_event() checks each connector for the
DRM_CONNECTOR_POLL_HPD flag. The only one that has it is eDP-1,
so we skip reprobing each connector except that one.
In addition, we also now avoid setting connector->polled to
DRM_CONNECTOR_POLL_HPD for MST connectors, since their reprobing is
handled by the mst helpers. This is probably what was originally
intended to happen here.
Changes since V1:
* Use the explanation of the issue as the commit message instead
* Change the title of the commit, since this does more then just stop a
check for an encoder now
* Add "Fixes" line for the patch that introduced this regression
* Don't enable DRM_CONNECTOR_POLL_HPD for mst connectors
Changes since V2:
* Put patch changelog above Signed-off-by
* Follow Daniel Vetter's suggestion for making the code here a bit more
legible
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Reference: http://mid.gmane.org/20151213124945.GA5715@nuc-i3427.alporthouse.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92084 Cc: drm-intel-fixes@lists.freedesktop.org Fixes: 820da7ae4633 ("Revert "drm/i915: shut up gen8+ SDE irq dmesg noise"") Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452155350-14658-1-git-send-email-jani.nikula@intel.com
(cherry picked from commit 2dfb0b816d224379efc534764388745c474abeb4) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Fri, 27 Nov 2015 13:28:55 +0000 (13:28 +0000)]
drm/i915: Restore inhibiting the load of the default context
Following a GPU reset, we may leave the context in a poorly defined
state, and reloading from that context will leave the GPU flummoxed. For
secondary contexts, this will lead to that context being banned - but
currently it is also causing the default context to become banned,
leading to turmoil in the shared state.
which quietly introduced the removal of the MI_RESTORE_INHIBIT on the
default context.
v2: Mark the global default context as uninitialized on GPU reset so
that the context-local workarounds are reloaded upon re-enabling.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1448630935-27377-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Cc: stable@vger.kernel.org
[danvet: This seems to fix a gpu hand on after the first resume,
resulting in any future suspend operation failing with -EIO because
the gpu seems to be in a funky state. Somehow this patch fixes that.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 42f1cae8c079bcceb3cff079fddc3ff8852c788f) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Daniel Vetter [Tue, 5 Jan 2016 16:54:07 +0000 (17:54 +0100)]
drm/i915: Tune down rpm wakelock debug checks
They're causing massive amounts of dmesg noise and hence CI noise all
over the place. Enabling them for a bit was good enough to refresh our
task list of what's still needed to enable rpm by default.
To make sure we're not forgetting to make this noisy again add a FIXME
comment.
Michał Winiarski [Tue, 29 Dec 2015 17:24:52 +0000 (18:24 +0100)]
drm/i915: Avoid writing relocs with addresses in non-canonical form
According to PRM, some parts of HW require the addresses to be in
a canonical form, where bits [63:48] == [47]. Let's convert addresses to
canonical form prior to relocating and return converted offsets to
userspace. We also need to make sure that userspace is using addresses
in canonical form in case of softpin.
v2: Whitespace fixup, gen8_canonical_addr description (Chris, Ville)
v3: Rebase on top of softpin, fix a hole in relocate_entry,
s/expect/require (Chris)
v4: Handle softpin in validate_exec_list (Chris)
v5: Convert back to canonical form at copy_to_user time (Chris)
v6: Don't use struct exec_object2 in place of exec_object
v7: Use sign_extend64 for converting to canonical form (Joonas),
reject non-canonical and non-page-aligned offset for softpin (Chris)
v8: Convert back to non-canonical form in a function,
split the test for EXEC_OBJECT_PINNED (Chris)
v9: s/canonial/canonical, drop accidental double newline (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451409892-13708-1-git-send-email-michal.winiarski@intel.com
Testcase: igt/gem_bad_reloc/negative-reloc-blt
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92699 Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 934acce3c069a3d8b14085957248444145d9ec1b) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Michel Thierry [Mon, 11 Jan 2016 11:39:27 +0000 (11:39 +0000)]
drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page
Kernel and userspace are able to handle 4GB (1<<32) address space range,
but "A32 Stateless Model" is not. According to documentation, A32 accesses
are based on General State Base Address and bound checking is in place.
Because size field (instruction State Base Address) limitation, it is not
possible to address full 4GB memory region.
A32 Stateless Model is used by some libraries and without this patch, the
last page of 4GB address space is not accessible in 32bit processes.
Matt Roper [Tue, 12 Jan 2016 15:13:37 +0000 (07:13 -0800)]
drm/i915: Handle error paths during watermark sanitization properly (v3)
sanitize_watermarks() does not properly handle errors returned by
drm_atomic_helper_duplicate_state(). Make failures drop locks before
returning. We also change the lock of connection_mutex to a
drm_modeset_lock_all_ctx() to make sure any EDEADLK's are handled
earlier.
v2: Change call to lock connetion_mutex with a call to
drm_modeset_lock_all_ctx(). This ensures that any lock contention
is handled earlier and drm_atomic_helper_duplicate_state() won't
return EDEADLK. (Maarten)
v3: Drop locks properly in more error paths. (Maarten)
Ville Syrjälä [Tue, 12 Jan 2016 15:28:16 +0000 (17:28 +0200)]
drm/i915: Only complain about n_edp_entries with eDP ports
commit 10afa0b65fe2 ("drm/i915: Reject >9 ddi translation entried if port != A/E on SKL")
added sanity checks to make sure we don't end up with too many ddi translation
values for eDP ports, but it actually failed to check if the port is eDP.
We still look up the edp translations for non-eDP ports, but don't use
them, so we shouldn't be complaining about them either.
Inki Dae [Tue, 5 Jan 2016 10:50:31 +0000 (19:50 +0900)]
drm/exynos: fix kernel panic issue at drm releasing
This patch fixes a kernel panic issue which happened
when drm driver is closed while modetest.
This issue could be reproduced easily by launching modetest
with page flip repeatedly.
The reason is that invalid drm_file object could be accessed by
send_vblank_event function when finishing page flip if the drm_file
object was removed by drm_release and there was a pended page
flip event which was already committed to hardware.
So this patch makes the pended page flip event to be cancelled by
preclose callback which is called at front of drm_release function.
Changelog v2:
- free vblank event objects belonging to the request process,
increment event space and decrease pending_update when cancelling
the event
Signed-off-by: Inki Dae <inki.dae@samsung.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Acked-by: Daniel Vetter <daniel@ffwll.ch>
Inki Dae [Thu, 24 Dec 2015 08:24:35 +0000 (17:24 +0900)]
drm/exynos: crtc: do not wait for the scanout completion
This patch removes exynos_drm_crtc_complete_scanout function call
which makes sure for overlay data to be updated to real hardware
when drm driver is released.
With atomic modeset support, it doesn't need the funtion anymore
because atomic modeset interface makes sure that.
drm/exynos: mixer: properly update all planes on the same vblank event
This patch also moves mixer_vsync_set_update() to newly introduced
mixer_atomic_begin/flush callbacks. This ensures that all mixer planes
will be updated on the same vsync event.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Some CRTC drivers (like Exynos DRM Mixer) can handle blocking register
updates only on per-device level, not per-plane level. This patch changes
exynos_crts atomic_begin/atomic_flush callbacks to handle the entire crtc,
instead of given planes, so driver can handle both cases on their own.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Marek Szyprowski [Wed, 16 Dec 2015 12:21:48 +0000 (13:21 +0100)]
drm/exynos: mixer: unify a check for video-processor window
Always use macro instead of hard-coded '2' value in conditions related
to video processor window. Additional checks are not needed, because
video layer is registered only when video processor is available.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Marek Szyprowski [Wed, 16 Dec 2015 12:21:46 +0000 (13:21 +0100)]
drm/exynos: mixer: refactor layer setup
Properly configure blending properties of given hardware layer based on
the selected pixel format. Currently only per-pixel-based alpha is possible
when respective pixel format has been selected. Configuration of global,
per-plane alpha value, color key and background color will be added later.
This patch is heavily inspired by earlier work done by Tobias Jakobi
<tjakobi@math.uni-bielefeld.de>.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Marek Szyprowski [Wed, 16 Dec 2015 12:21:44 +0000 (13:21 +0100)]
drm/exynos: mixer: set window priority based on zpos
'zpos' plane property is configurable, so adjust hardware layers
priority based on the zpos value. 'zpos' value shifted by one can be
used directly as hw priority value and stored to the registers, because
mixer accepts priority values from 1 to 15 (0 means that layer is
disabled).
This patch also changes the default layer priority to match already
exposed initial zpos values. The initial configuration is now:
[top] video > gfx layer1 > gfx layer0 [bottom].
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Marek Szyprowski [Wed, 16 Dec 2015 12:21:42 +0000 (13:21 +0100)]
drm/exynos: rename zpos to index
This patch renames zpos entry to index, because in most places it is
used as index for selecting hardware layer/window instead of
configurable layer position. This will later enable to make the zpos
property configurable.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Ville Syrjälä [Mon, 14 Dec 2015 16:23:49 +0000 (18:23 +0200)]
drm/i915: Use MI_BATCH_BUFFER_START on 830/845
MI_BATCH_BUFFER is nasty since it requires that userspace pass in the
correct batch length.
Let's switch to using MI_BATCH_BUFFER_START instead (like we do on
other platforms). Then we don't have to specify the batch length
at all, and the CS will instead execute until it sees the
MI_BATCH_BUFFER_END.
We still need the batch length since we do the CS TLB workaround
and copy the batch into the permanently pinned scratch object
and execute it from there. But for this we can simply use the
batch object length when the user hasn't specified the actual
batch length. So specifying the batch length becomes just a
way to optimize the batch copy a little bit.
We lost batch_len from a bunch of igts (including the quiesce batch)
so without this igt is utterly broken on 830/845. Also some igts such
as gem_cpu_reloc never specified the batch_len and so didn't work.
With MI_BATCH_BUFFER_START we don't have to fix up igt every time
someone forgets that 830/845 exist.
projects / mirror_ubuntu-jammy-kernel.git / log