Jakub Kicinski [Tue, 25 Oct 2022 18:51:26 +0000 (11:51 -0700)]
phylink: require valid state argument to phylink_validate_mask_caps()
state is deferenced earlier in the function, the NULL check
is pointless. Since we don't have any crash reports presumably
it's safe to assume state is not NULL.
* tag 'ieee802154-for-net-next-2022-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next:
net: mac802154: Fixup function parameter name in docs
====================
David S. Miller [Wed, 26 Oct 2022 14:24:36 +0000 (15:24 +0100)]
Merge tag 'ieee802154-for-net-next-2022-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next
Stefan Schmidt says:
====================
==
One of the biggest cycles for ieee802154 in a long time. We are landing the
first pieces of a big enhancements in managing PAN's. We might have another pull
request ready for this cycle later on, but I want to get this one out first.
Miquel Raynal added support for sending frames synchronously as a dependency
to handle MLME commands. Also introducing more filtering levels to match with
the needs of a device when scanning or operating as a pan coordinator.
To support development and testing the hwsim driver for ieee802154 was also
enhanced for the new filtering levels and to update the PIB attributes.
Alexander Aring fixed quite a few bugs spotted during reviewing changes. He
also added support for TRAC in the atusb driver to have better failure
handling if the firmware provides the needed information.
Jilin Yuan fixed a comment with a repeated word in it.
==================
Signed-off-by: David S. Miller <davem@davemloft.net>
====================
this is a pull request of 29 patches for net-next/master.
The first patch is by Daniel S. Trevitz and adds documentation for
switchable termination resistors.
Zhang Changzhong's patch fixes a debug output in the j13939 stack.
Oliver Hartkopp finally removes the pch_can driver, which is
superseded by the generic c_can driver.
Gustavo A. R. Silva replaces a zero-length array with
DECLARE_FLEX_ARRAY() in the ucan driver.
Kees Cook's patch removes a no longer needed silencing of
"-Warray-bounds" warnings for the kvaser_usb driver.
The next 2 patches target the m_can driver. The first is by me cleans
up the LEC error handling, the second is by Vivek Yadav and extends
the LEC error handling to the data phase of CAN-FD frames.
The next 9 patches all target the gs_usb driver. The first 5 patches
are by me and improve the Kconfig prompt and help text, set
netdev->dev_id to distinguish multi CAN channel devices, allow
loopback and listen only at the same time, and clean up the
gs_can_open() function a bit. The remaining 4 patches are by Jeroen
Hofstee and add support for 2 new features: Bus Error Reporting and
Get State.
Jimmy Assarsson and Anssi Hannula contribute 10 patches for the
kvaser_usb driver. They first add Listen Only and Bus Error Reporting
support, handle CMD_ERROR_EVENT errors, improve CAN state handling,
restart events, and configuration of the bit timing parameters.
Another patch by me which fixes the indention in the m_can driver.
A patch by Dongliang Mu cleans up the ucan_disconnect() function in
the ucan driver.
The last patch by Biju Das is for the rcan_canfd driver and cleans up
the reset handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge patch series "can: kvaser_usb: Fixes and improvements"
Jimmy Assarsson <extja@kvaser.com> says:
Split v4 series, since it got rejected [1]. This part only contains
non-critical fixes and improvements.
Note: This series depend on changes in [2].
Changes in v5:
- Split v4 series, since it got rejected [1].
This part only contains non-critical fixes and improvements.
Changes in v4: https://lore.kernel.org/all/20220903182344.139-1-extja@kvaser.com
- Add Tested-by: Anssi Hannula to
[PATCH v4 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
- Update commit message in
[PATCH v4 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
Changes in v3: https://lore.kernel.org/all/20220901122729.271-1-extja@kvaser.com
- Rebase on top of commit 1d5eeda23f36 ("can: kvaser_usb: advertise timestamping capabilities and add ioctl support")
- Add Tested-by: Anssi Hannula
- Add stable@vger.kernel.org to CC.
- Add my S-o-b to all patches
- Fix regression introduced in
[PATCH v2 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
found by Anssi Hannula
https://lore.kernel.org/all/b25bc059-d776-146d-0b3c-41aecf4bd9f8@bitwise.fi
Jimmy Assarsson [Mon, 10 Oct 2022 18:52:37 +0000 (20:52 +0200)]
can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming
The device will respond with a CMD_ERROR_EVENT command, with error_code
KVASER_USB_{LEAF,HYDRA}_ERROR_EVENT_PARAM, if the CMD_SET_BUSPARAMS_REQ
contains invalid bittiming parameters.
However, this command does not contain any channel reference.
To check if the CMD_SET_BUSPARAMS_REQ was successful, redback and compare
the requested bittiming parameters with the device reported parameters.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi> Co-developed-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-12-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Anssi Hannula [Mon, 10 Oct 2022 18:52:35 +0000 (20:52 +0200)]
can: kvaser_usb_leaf: Fix bogus restart events
When auto-restart is enabled, the kvaser_usb_leaf driver considers
transition from any state >= CAN_STATE_BUS_OFF as a bus-off recovery
event (restart).
However, these events may occur at interface startup time before
kvaser_usb_open() has set the state to CAN_STATE_ERROR_ACTIVE, causing
restarts counter to increase and CAN_ERR_RESTARTED to be sent despite no
actual restart having occurred.
Fix that by making the auto-restart condition checks more strict so that
they only trigger when the interface was actually in the BUS_OFF state.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-10-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Anssi Hannula [Mon, 10 Oct 2022 18:52:34 +0000 (20:52 +0200)]
can: kvaser_usb_leaf: Ignore stale bus-off after start
With 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 it was observed
that if the device was bus-off when stopped, at next start (either via
interface down/up or manual bus-off restart) the initial
CMD_CHIP_STATE_EVENT received just after CMD_START_CHIP_REPLY will have
the M16C_STATE_BUS_OFF bit still set, causing the interface to
immediately go bus-off again.
The bit seems to internally clear quickly afterwards but we do not get
another CMD_CHIP_STATE_EVENT.
Fix the issue by ignoring any initial bus-off state until we see at
least one bus-on state. Also, poll the state periodically until that
occurs.
It is possible we lose one actual immediately occurring bus-off event
here in which case the HW will auto-recover and we see the recovery
event. We will then catch the next bus-off event, if any.
This issue did not reproduce with 0bfd:0017 Kvaser Memorator
Professional HS/HS FW 2.0.50.
Fixes: 71873a9b38d1 ("can: kvaser_usb: Add support for more Kvaser Leaf v2 devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-9-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Anssi Hannula [Mon, 10 Oct 2022 18:52:33 +0000 (20:52 +0200)]
can: kvaser_usb_leaf: Fix wrong CAN state after stopping
0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 sends a
CMD_CHIP_STATE_EVENT indicating bus-off after stopping the device,
causing a stopped device to appear as CAN_STATE_BUS_OFF instead of
CAN_STATE_STOPPED.
Fix that by not handling error events on stopped devices.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-8-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Anssi Hannula [Mon, 10 Oct 2022 18:52:32 +0000 (20:52 +0200)]
can: kvaser_usb_leaf: Fix improved state not being reported
The tested 0bfd:0017 Kvaser Memorator Professional HS/HS FW 2.0.50 and
0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 do not seem to send
any unsolicited events when error counters decrease or when the device
transitions from ERROR_PASSIVE to ERROR_ACTIVE (or WARNING).
This causes the interface to e.g. indefinitely stay in the ERROR_PASSIVE
state.
Fix that by asking for chip state (inc. counters) event every 0.5 secs
when error counters are non-zero.
Since there are non-error-counter devices, also always poll in
ERROR_PASSIVE even if the counters show zero.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-7-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Anssi Hannula [Mon, 10 Oct 2022 18:52:31 +0000 (20:52 +0200)]
can: kvaser_usb_leaf: Set Warning state even without bus errors
kvaser_usb_leaf_rx_error_update_can_state() sets error state according
to error counters when the hardware does not indicate a specific state
directly.
However, this is currently gated behind a check for
M16C_STATE_BUS_ERROR which does not always seem to be set when error
counters are increasing, and may not be set when error counters are
decreasing.
This causes the CAN_STATE_ERROR_WARNING state to not be set in some
cases even when appropriate.
Change the code to set error state from counters even without
M16C_STATE_BUS_ERROR.
The Error-Passive case seems superfluous as it is already set via
M16C_STATE_BUS_PASSIVE flag above, but it is kept for now.
Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-6-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Jimmy Assarsson [Mon, 10 Oct 2022 18:52:28 +0000 (20:52 +0200)]
can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
Use the CMD_GET_CAPABILITIES_REQ command to query the device for certain
capabilities. We are only interested in LISTENONLY mode and wither the
device reports CAN error counters.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Reported-by: Anssi Hannula <anssi.hannula@bitwise.fi> Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stefan Schmidt [Wed, 26 Oct 2022 07:40:34 +0000 (09:40 +0200)]
net: mac802154: Fixup function parameter name in docs
The function parameter name was wrong in kdocs.
net/mac802154/util.c:27: warning: Function parameter or member 'hw' not described in 'ieee802154_wake_queue'
net/mac802154/util.c:27: warning: Excess function parameter 'local' description in 'ieee802154_wake_queue'
net/mac802154/util.c:53: warning: Function parameter or member 'hw' not described in 'ieee802154_stop_queue'
net/mac802154/util.c:53: warning: Excess function parameter 'local' description in 'ieee802154_stop_queue'
Fixing name and description.
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
caihuoqing [Mon, 24 Oct 2022 10:33:35 +0000 (18:33 +0800)]
net: hinic: Set max_mtu/min_mtu directly to simplify the code.
Set max_mtu/min_mtu directly to avoid making the validity judgment
when set mtu, because the judgment is made in net/core: dev_validate_mtu,
so to simplify the code.
This patch series continues with the addition of supported features for the
Ethernet function of the PCI11010 / PCI11414 devices to the LAN743x driver.
====================
Kees Cook [Tue, 18 Oct 2022 09:56:03 +0000 (02:56 -0700)]
net: dev: Convert sa_data to flexible array in struct sockaddr
One of the worst offenders of "fake flexible arrays" is struct sockaddr,
as it is the classic example of why GCC and Clang have been traditionally
forced to treat all trailing arrays as fake flexible arrays: in the
distant misty past, sa_data became too small, and code started just
treating it as a flexible array, even though it was fixed-size. The
special case by the compiler is specifically that sizeof(sa->sa_data)
and FORTIFY_SOURCE (which uses __builtin_object_size(sa->sa_data, 1))
do not agree (14 and -1 respectively), which makes FORTIFY_SOURCE treat
it as a flexible array.
However, the coming -fstrict-flex-arrays compiler flag will remove
these special cases so that FORTIFY_SOURCE can gain coverage over all
the trailing arrays in the kernel that are _not_ supposed to be treated
as a flexible array. To deal with this change, convert sa_data to a true
flexible array. To keep the structure size the same, move sa_data into
a union with a newly introduced sa_data_min with the original size. The
result is that FORTIFY_SOURCE can continue to have no idea how large
sa_data may actually be, but anything using sizeof(sa->sa_data) must
switch to sizeof(sa->sa_data_min).
Cc: Jens Axboe <axboe@kernel.dk> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: David Ahern <dsahern@kernel.org> Cc: Dylan Yudaken <dylany@fb.com> Cc: Yajun Deng <yajun.deng@linux.dev> Cc: Petr Machata <petrm@nvidia.com> Cc: Hangbin Liu <liuhangbin@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: syzbot <syzkaller@googlegroups.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221018095503.never.671-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kees Cook [Sat, 22 Oct 2022 02:10:47 +0000 (19:10 -0700)]
bnx2: Use kmalloc_size_roundup() to match ksize() usage
Round up allocations with kmalloc_size_roundup() so that build_skb()'s
use of ksize() is always accurate and no special handling of the memory
is needed by KASAN, UBSAN_BOUNDS, nor FORTIFY_SOURCE.
Cc: Rasesh Mody <rmody@marvell.com> Cc: GR-Linux-NIC-Dev@marvell.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221022021004.gonna.489-kees@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Tue, 25 Oct 2022 10:32:59 +0000 (12:32 +0200)]
Merge branch 'mptcp-socket-option-updates'
Mat Martineau says:
====================
mptcp: Socket option updates
Patches 1 and 3 refactor a recent socket option helper function for more
generic use, and make use of it in a couple of places.
Patch 2 adds TCP_FASTOPEN_NO_COOKIE functionality to MPTCP sockets,
similar to TCP_FASTOPEN_CONNECT support recently added in v6.1
====================
Matthieu Baerts [Sat, 22 Oct 2022 00:45:05 +0000 (17:45 -0700)]
mptcp: sockopt: use new helper for TCP_DEFER_ACCEPT
mptcp_setsockopt_sol_tcp_defer() was doing the same thing as
mptcp_setsockopt_first_sf_only() except for the returned code in case of
error.
Ignoring the error is needed to mimic how TCP_DEFER_ACCEPT is handled
when used with "plain" TCP sockets.
The specific function for TCP_DEFER_ACCEPT can be replaced by the new
mptcp_setsockopt_first_sf_only() helper and errors can be ignored to
stay compatible with TCP. A bit of cleanup.
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Matthieu Baerts [Sat, 22 Oct 2022 00:45:04 +0000 (17:45 -0700)]
mptcp: add TCP_FASTOPEN_NO_COOKIE support
The goal of this socket option is to configure MPTCP + TFO without
cookie per socket.
It was already possible to enable TFO without a cookie per netns by
setting net.ipv4.tcp_fastopen sysctl knob to the right value. Per route
was also supported by setting 'fastopen_no_cookie' option. This patch
adds a per socket support like it is possible to do with TCP thanks to
TCP_FASTOPEN_NO_COOKIE socket option.
The only thing to do here is to relay the request to the first subflow
like it is already done for TCP_FASTOPEN_CONNECT.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
setsockopt(SO_INCOMING_CPU) for UDP/TCP is broken since 4.5/4.6 due to
these commits:
* e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection")
* c125e80b8868 ("soreuseport: fast reuseport TCP socket selection")
These commits introduced the O(1) socket selection algorithm and removed
O(n) iteration over the list, but it ignores the score calculated by
compute_score(). As a result, it caused two misbehaviours:
* Unconnected sockets receive packets sent to connected sockets
* SO_INCOMING_CPU does not work
The former is fixed by commit acdcecc61285 ("udp: correct reuseport
selection with connected sockets"). This series fixes the latter and
adds some tests for SO_INCOMING_CPU.
====================
Some highly optimised applications use SO_INCOMING_CPU to make them
efficient, but they didn't test if it's working correctly by getsockopt()
to avoid slowing down. As a result, no one noticed it had been broken
for years, so it's a good time to add a test to catch future regression.
The test does
1) Create $(nproc) TCP listeners associated with each CPU.
2) Create 32 child sockets for each listener by calling
sched_setaffinity() for each CPU.
3) Check if accept()ed sockets' sk_incoming_cpu matches
listener's one.
If we see -EAGAIN, SO_INCOMING_CPU is broken. However, we might not see
any error even if broken; the kernel could miraculously distribute all SYN
to correct listeners. Not to let that happen, we must increase the number
of clients and CPUs to some extent, so the test requires $(nproc) >= 2 and
creates 64 sockets at least.
Test:
$ nproc
96
$ ./so_incoming_cpu
Before the previous patch:
# Starting 12 tests from 5 test cases.
# RUN so_incoming_cpu.before_reuseport.test1 ...
# so_incoming_cpu.c:191:test1:Expected cpu (5) == i (0)
# test1: Test terminated by assertion
# FAIL so_incoming_cpu.before_reuseport.test1
not ok 1 so_incoming_cpu.before_reuseport.test1
...
# FAILED: 0 / 12 tests passed.
# Totals: pass:0 fail:12 xfail:0 xpass:0 skip:0 error:0
After:
# Starting 12 tests from 5 test cases.
# RUN so_incoming_cpu.before_reuseport.test1 ...
# so_incoming_cpu.c:199:test1:SO_INCOMING_CPU is very likely to be working correctly with 3072 sockets.
# OK so_incoming_cpu.before_reuseport.test1
ok 1 so_incoming_cpu.before_reuseport.test1
...
# PASSED: 12 / 12 tests passed.
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
soreuseport: Fix socket selection for SO_INCOMING_CPU.
Kazuho Oku reported that setsockopt(SO_INCOMING_CPU) does not work
with setsockopt(SO_REUSEPORT) since v4.6.
With the combination of SO_REUSEPORT and SO_INCOMING_CPU, we could
build a highly efficient server application.
setsockopt(SO_INCOMING_CPU) associates a CPU with a TCP listener
or UDP socket, and then incoming packets processed on the CPU will
likely be distributed to the socket. Technically, a socket could
even receive packets handled on another CPU if no sockets in the
reuseport group have the same CPU receiving the flow.
The logic exists in compute_score() so that a socket will get a higher
score if it has the same CPU with the flow. However, the score gets
ignored after the blamed two commits, which introduced a faster socket
selection algorithm for SO_REUSEPORT.
This patch introduces a counter of sockets with SO_INCOMING_CPU in
a reuseport group to check if we should iterate all sockets to find
a proper one. We increment the counter when
* calling listen() if the socket has SO_INCOMING_CPU and SO_REUSEPORT
* enabling SO_INCOMING_CPU if the socket is in a reuseport group
Also, we decrement it when
* detaching a socket out of the group to apply SO_INCOMING_CPU to
migrated TCP requests
* disabling SO_INCOMING_CPU if the socket is in a reuseport group
When the counter reaches 0, we can get back to the O(1) selection
algorithm.
The overall changes are negligible for the non-SO_INCOMING_CPU case,
and the only notable thing is that we have to update sk_incomnig_cpu
under reuseport_lock. Otherwise, the race prevents transitioning to
the O(n) algorithm and results in the wrong socket selection.
Paolo Abeni [Tue, 25 Oct 2022 09:15:21 +0000 (11:15 +0200)]
Merge branch 'net-ipa-validation-cleanup'
Alex Elder says:
====================
net: ipa: validation cleanup
This series gathers a set of IPA driver cleanups, mostly involving
code that ensures certain things are known to be correct *early*
(either at build or initializatin time), so they can be assumed good
during normal operation.
The first removes three constant symbols, by making a (reasonable)
assumption that a routing table consists of entries for the modem
followed by entries for the AP, with no unused entries between them.
The second removes two checks that are redundant (they verify the
sizes of two memory regions are in range, which will have been done
earlier for all regions).
The third adds some new checks to routing and filter tables that
can be done at "init time" (without requiring any access to IPA
hardware).
The fourth moves a check that routing and filter table addresses can
be encoded within certain IPA immediate commands, so it's performed
earlier; the checks can be done without touching IPA hardware. The
fifth moves some other command-related checks earlier, for the same
reason.
The sixth removes the definition ipa_table_valid(), because what it
does has become redundant. Finally, the last patch moves two more
validation calls so they're done very early in the probe process.
This will be required by some upcoming patches, which will record
the size of the routing and filter tables at this time so they're
available for subsequent initialization.
====================
Alex Elder [Fri, 21 Oct 2022 19:13:40 +0000 (14:13 -0500)]
net: ipa: check table memory regions earlier
Verify that the sizes of the routing and filter table memory regions
are valid as part of memory initialization, rather than waiting for
table initialization. The main reason to do this is that upcoming
patches use these memory region sizes to determine the number of
entries in these tables, and we'll want to know these sizes are good
sooner.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alex Elder [Fri, 21 Oct 2022 19:13:39 +0000 (14:13 -0500)]
net: ipa: kill ipa_table_valid()
What ipa_table_valid() (and ipa_table_valid_one(), which it calls)
does is ensure that the memory regions that hold routing and filter
tables have reasonable size. Specifically, it checks that the size
of a region is sufficient (or rather, exactly the right size) to
hold the maximum number of entries supported by the driver. (There
is an additional check that's erroneous, but in practice it is never
reached.)
Recently ipa_table_mem_valid() was added, which is called by
ipa_table_init(). That function verifies that all table memory
regions are of sufficient size, and requires hashed tables to have
zero size if hashing is not supported. It only ensures the filter
table is large enough to hold the number of endpoints that support
filtering, but that is adequate.
Therefore everything that ipa_table_valid() does is redundant, so
get rid of it.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alex Elder [Fri, 21 Oct 2022 19:13:38 +0000 (14:13 -0500)]
net: ipa: introduce ipa_cmd_init()
Currently, ipa_cmd_data_valid() is called by ipa_mem_config().
Nothing it does requires access to hardware though, so it can be
done during the init phase of IPA driver startup.
Create a new function ipa_cmd_init(), whose purpose is to do early
initialization related to IPA immediate commands. It will call the
build-time validation function, then will make the two calls made
previously by ipa_cmd_data_valid(). This make ipa_cmd_data_valid()
unnecessary, so get rid of it.
Rename ipa_cmd_header_valid() to be ipa_cmd_header_init_local_valid(),
so its name is clearer about which IPA immediate command it is
associated with.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alex Elder [Fri, 21 Oct 2022 19:13:37 +0000 (14:13 -0500)]
net: ipa: verify table sizes fit in commands early
We currently verify the table size and offset fit in the immediate
command fields that must encode them in ipa_table_valid_one(). We
can now make this check earlier, in ipa_table_mem_valid().
The non-hashed IPv4 filter and route tables will always exist, and
their sizes will match the IPv6 tables, as well as the hashed tables
(if supported). So it's sufficient to verify the offset and size of
the IPv4 non-hashed tables fit into these fields.
Rename the function ipa_cmd_table_init_valid(), to reinforce that
it is the TABLE_INIT immediate command fields we're checking.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alex Elder [Fri, 21 Oct 2022 19:13:36 +0000 (14:13 -0500)]
net: ipa: validate IPA table memory earlier
Add checks in ipa_table_init() to ensure the memory regions defined
for IPA filter and routing tables are valid.
For routing tables, the checks ensure:
- The non-hashed IPv4 and IPv6 routing tables are defined
- The non-hashed IPv4 and IPv6 routing tables are the same size
- The number entries in the non-hashed IPv4 routing table is enough
to hold the number entries available to the modem, plus at least
one usable by the AP.
For filter tables, the checks ensure:
- The non-hashed IPv4 and IPv6 filter tables are defined
- The non-hashed IPv4 and IPv6 filter tables are the same size
- The number entries in the non-hashed IPv4 filter table is enough
to hold the endpoint bitmap, plus an entry for each defined
endpoint that supports filtering.
In addition, for both routing and filter tables:
- If hashing isn't supported (IPA v4.2), hashed tables are zero size
- If hashing *is* supported, all hashed tables are the same size as
their non-hashed counterparts.
When validating the size of routing tables, require the AP to have
at least one entry (in addition to those used by the modem).
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alex Elder [Fri, 21 Oct 2022 19:13:35 +0000 (14:13 -0500)]
net: ipa: remove two memory region checks
There's no need to ensure table memory regions fit within the
IPA-local memory range. And there's no need to ensure the modem
header memory region is in range either. These are verified for all
memory regions in ipa_mem_size_valid(), once we have settled on the
size of IPA memory.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alex Elder [Fri, 21 Oct 2022 19:13:34 +0000 (14:13 -0500)]
net: ipa: kill two constant symbols
The entries in each IPA routing table are divided between the modem
and the AP. The modem always gets some number of entries located at
the base of the table; the AP gets all those that follow.
There's no reason to think the modem will use anything different
from the first entries in a routing table, so:
- Get rid of IPA_ROUTE_MODEM_MIN (just assume it's 0)
- Get rid of IPA_ROUTE_AP_MIN (just assume it's IPA_ROUTE_MODEM_COUNT)
And finally:
- Open-code IPA_ROUTE_AP_COUNT and remove its definition
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
Extend action skbedit to RX queue mapping
Based on the discussion on
https://lore.kernel.org/netdev/166260012413.81018.8010396115034847972.stgit@anambiarhost.jf.intel.com/ ,
the following series extends skbedit tc action to RX queue mapping.
Currently, skbedit action in tc allows overriding of transmit queue.
Extending this ability of skedit action supports the selection of
receive queue for incoming packets. On the receive side, this action
is supported only in hardware, so the skip_sw flag is enforced.
Enabled ice driver to offload this type of filter into the hardware
for accepting packets to the device's receive queue.
====================
Amritha Nambiar [Fri, 21 Oct 2022 07:58:45 +0000 (00:58 -0700)]
ice: Enable RX queue selection using skbedit action
This patch uses TC skbedit queue_mapping action to support
forwarding packets to a device queue. Such filters with action
forward to queue will be the highest priority switch filter in
HW.
Example:
$ tc filter add dev ens4f0 protocol ip ingress flower\
dst_ip 192.168.1.12 ip_proto tcp dst_port 5001\
action skbedit queue_mapping 5 skip_sw
The above command adds an ingress filter, incoming packets
qualifying the match will be accepted into queue 5. The queue
number is in decimal format.
Refactored ice_add_tc_flower_adv_fltr() to consolidate code with
action FWD_TO_VSI and FWD_TO QUEUE.
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Amritha Nambiar [Fri, 21 Oct 2022 07:58:39 +0000 (00:58 -0700)]
act_skbedit: skbedit queue mapping for receive queue
Add support for skbedit queue mapping action on receive
side. This is supported only in hardware, so the skip_sw
flag is enforced. This enables offloading filters for
receive queue selection in the hardware using the
skbedit action. Traffic arrives on the Rx queue requested
in the skbedit action parameter. A new tc action flag
TCA_ACT_FLAGS_AT_INGRESS is introduced to identify the
traffic direction the action queue_mapping is requested
on during filter addition. This is used to disallow
offloading the skbedit queue mapping action on transmit
side.
Example:
$tc filter add dev $IFACE ingress protocol ip flower dst_ip $DST_IP\
action skbedit queue_mapping $rxq_id skip_sw
====================
net: sfp: improve high power module implementation
This series aims to improve the power level switching between standard
level 1 and the higher power levels.
The first patch updates the DT binding documentation to include the
minimum and default of 1W, which is the base level that every SFP cage
must support. Hence, it makes sense to document this in the binding.
The second patch enforces a minimum of 1W when parsing the firmware
description, and optimises the code for that case; there's no need to
check for SFF8472 compliance since we will not need to touch the
A2h registers.
Patch 3 validates that the module supports SFF-8472 rev 10.2 before
checking for power level 2 - rev 10.2 is where support for power
levels was introduced, so if the module doesn't support this revision,
it doesn't support power levels. Setting the power level 2 declaration
bit is likely to be spurious.
Patch 4 does the same for power level 3, except this was introduced in
SFF-8472 rev 11.9. The revision code was never updated, so we use the
rev 11.4 to signify this.
Patch 5 cleans up the code - rather than using BIT(0), we now use a
properly named value for the power level select bit.
Patch 6 introduces a read-modify-write helper.
Patch 7 gets rid of the DM7052 hack (which sets a power level
declaration bit but is not compatible with SFF-8472 rev 10.2, and
the module does not implement the A2h I2C address.)
Series tested with my DM7052.
v2: update sff.sfp.yaml with Rob's feedback
====================
net: sfp: get rid of DM7052 hack when enabling high power
Since we no longer mis-detect high-power mode with the DM7052 module,
we no longer need the hack in sfp_module_enable_high_power(), and can
now switch this to use sfp_modify_u8().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a helper to modify bits in a single byte in memory space, and use
it when updating the soft tx-disable flag in the module.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: sfp: provide a definition for the power level select bit
Provide a named definition for the power level select bit in the
extended status register, rather than using BIT(0) in the code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: sfp: ignore power level 3 prior to SFF-8472 Rev 11.4
Power level 3 was included in SFF-8472 revision 11.9, but this does
not have a compliance code. Use revision 11.4 as the minimum
compliance level instead.
This should avoid any spurious indication of 2W modules.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: sfp: ignore power level 2 prior to SFF-8472 Rev 10.2
Power level 2 was introduced by SFF-8472 revision 10.2. Ignore
the power declaration bit for modules that are not compliant with
at least this revision.
This should remove any spurious indication of 1.5W modules.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check that the firmware provided maximum power is at least 1W, which
is the minimum power level for any SFP module.
Now that we enforce the minimum of 1W, we can exit early from
sfp_module_parse_power() if the module power is 1W or less.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a minimum and default for the maximum-power-milliwatt option;
module power levels were originally up to 1W, so this is the default
and the minimum power level we can have for a functional SFP cage.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 25 Oct 2022 02:24:19 +0000 (19:24 -0700)]
Merge branch 'bnxt_en-driver-updates'
Michael Chan says:
====================
bnxt_en: Driver updates
This patchset adds .get_module_eeprom_by_page() support and adds
an NVRAM resize step to allow larger firmware images to be flashed
to older firmware.
====================
Vikas Gupta [Fri, 21 Oct 2022 06:37:23 +0000 (02:37 -0400)]
bnxt_en: check and resize NVRAM UPDATE entry before flashing
Resize of the UPDATE entry is required if the image to
be flashed is larger than the available space. Add this step,
otherwise flashing larger firmware images by ethtool or devlink
may fail.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vikas Gupta [Fri, 21 Oct 2022 06:37:22 +0000 (02:37 -0400)]
bnxt_en: add .get_module_eeprom_by_page() support
Add support for .get_module_eeprom_by_page() callback which
implements generic solution for module`s eeprom access.
v3: Add bnxt_get_module_status() to get a more specific extack error
string.
Return -EINVAL from bnxt_get_module_eeprom_by_page() when we
don't want to fallback to old method.
v2: Simplification suggested by Ido Schimmel
Link: https://lore.kernel.org/netdev/YzVJ%2FvKJugoz15yV@shredder/ Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Mon, 24 Oct 2022 19:43:51 +0000 (12:43 -0700)]
Merge tag 'net-6.1-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
The net-memcg fix stands out, the rest is very run-off-the-mill. Maybe
I'm biased.
Current release - regressions:
- eth: fman: re-expose location of the MAC address to userspace,
apparently some udev scripts depended on the exact value
Current release - new code bugs:
- bpf:
- wait for busy refill_work when destroying bpf memory allocator
- allow bpf_user_ringbuf_drain() callbacks to return 1
- fix dispatcher patchable function entry to 5 bytes nop
Previous releases - regressions:
- net-memcg: avoid stalls when under memory pressure
- tcp: fix indefinite deferral of RTO with SACK reneging
- tipc: fix a null-ptr-deref in tipc_topsrv_accept
- eth: macb: specify PHY PM management done by MAC
- tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
Previous releases - always broken:
- eth: amd-xgbe: SFP fixes and compatibility improvements
Misc:
- docs: netdev: offer performance feedback to contributors"
* tag 'net-6.1-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
net-memcg: avoid stalls when under memory pressure
tcp: fix indefinite deferral of RTO with SACK reneging
tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY
net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed
docs: netdev: offer performance feedback to contributors
kcm: annotate data-races around kcm->rx_wait
kcm: annotate data-races around kcm->rx_psock
net: fman: Use physical address for userspace interfaces
net/mlx5e: Cleanup MACsec uninitialization routine
atlantic: fix deadlock at aq_nic_stop
nfp: only clean `sp_indiff` when application firmware is unloaded
amd-xgbe: add the bit rate quirk for Molex cables
amd-xgbe: fix the SFP compliance codes check for DAC cables
amd-xgbe: enable PLL_CTL for fixed PHY modes only
amd-xgbe: use enums for mailbox cmd and sub_cmds
amd-xgbe: Yellow carp devices do not need rrc
bpf: Use __llist_del_all() whenever possbile during memory draining
bpf: Wait for busy refill_work when destroying bpf memory allocator
MAINTAINERS: add keyword match on PTP
...
Linus Torvalds [Mon, 24 Oct 2022 19:33:30 +0000 (12:33 -0700)]
Merge tag 'rcu-urgent.2022.10.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"Fix a regression caused by commit bf95b2bc3e42 ("rcu: Switch polled
grace-period APIs to ->gp_seq_polled"), which could incorrectly leave
interrupts enabled after an early-boot call to synchronize_rcu().
Such synchronize_rcu() calls must acquire leaf rcu_node locks in order
to properly interact with polled grace periods, but the code did not
take into account the possibility of synchronize_rcu() being invoked
from the portion of the boot sequence during which interrupts are
disabled.
This commit therefore switches the lock acquisition and release from
irq to irqsave/irqrestore"
* tag 'rcu-urgent.2022.10.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu: Keep synchronize_rcu() from enabling irqs in early boot
Linus Torvalds [Mon, 24 Oct 2022 19:19:34 +0000 (12:19 -0700)]
Merge tag 'linux-kselftest-kunit-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"One single fix to update alloc_string_stream() callers to check for
IS_ERR() instead of NULL to be in sync with alloc_string_stream()
returning an ERR_PTR()"
* tag 'linux-kselftest-kunit-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: update NULL vs IS_ERR() tests
Linus Torvalds [Mon, 24 Oct 2022 19:10:55 +0000 (12:10 -0700)]
Merge tag 'linux-kselftest-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
- futex, intel_pstate, kexec build fixes
- ftrace dynamic_events dependency check fix
- memory-hotplug fix to remove redundant warning from test report
* tag 'linux-kselftest-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: fix dynamic_events dependency check
selftests/memory-hotplug: Remove the redundant warning information
selftests/kexec: fix build for ARCH=x86_64
selftests/intel_pstate: fix build for ARCH=x86_64
selftests/futex: fix build for clang
Linus Torvalds [Mon, 24 Oct 2022 18:48:30 +0000 (11:48 -0700)]
Merge tag 'pinctrl-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix typos in UART1 and MMC in the Ingenic driver
- A really well researched glitch bug fix to the Qualcomm driver that
was tracked down and fixed by Dough Anderson from Chromium. Hats off
for this one!
- Revert two patches on the Xilinx ZynqMP driver: this needs a proper
solution making use of firmware version information to adapt to
different firmware releases
- Fix interrupt triggers in the Ocelot driver
* tag 'pinctrl-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: ocelot: Fix incorrect trigger of the interrupt.
Revert "dt-bindings: pinctrl-zynqmp: Add output-enable configuration"
Revert "pinctrl: pinctrl-zynqmp: Add support for output-enable and bias-high-impedance"
pinctrl: qcom: Avoid glitching lines when we first mux to output
pinctrl: Ingenic: JZ4755 bug fixes
Jakub Kicinski [Fri, 21 Oct 2022 16:03:04 +0000 (09:03 -0700)]
net-memcg: avoid stalls when under memory pressure
As Shakeel explains the commit under Fixes had the unintended
side-effect of no longer pre-loading the cached memory allowance.
Even tho we previously dropped the first packet received when
over memory limit - the consecutive ones would get thru by using
the cache. The charging was happening in batches of 128kB, so
we'd let in 128kB (truesize) worth of packets per one drop.
After the change we no longer force charge, there will be no
cache filling side effects. This causes significant drops and
connection stalls for workloads which use a lot of page cache,
since we can't reclaim page cache under GFP_NOWAIT.
Some of the latency can be recovered by improving SACK reneg
handling but nowhere near enough to get back to the pre-5.15
performance (the application I'm experimenting with still
sees 5-10x worst latency).
Apply the suggested workaround of using GFP_ATOMIC. We will now
be more permissive than previously as we'll drop _no_ packets
in softirq when under pressure. But I can't think of any good
and simple way to address that within networking.
Neal Cardwell [Fri, 21 Oct 2022 17:08:21 +0000 (17:08 +0000)]
tcp: fix indefinite deferral of RTO with SACK reneging
This commit fixes a bug that can cause a TCP data sender to repeatedly
defer RTOs when encountering SACK reneging.
The bug is that when we're in fast recovery in a scenario with SACK
reneging, every time we get an ACK we call tcp_check_sack_reneging()
and it can note the apparent SACK reneging and rearm the RTO timer for
srtt/2 into the future. In some SACK reneging scenarios that can
happen repeatedly until the receive window fills up, at which point
the sender can't send any more, the ACKs stop arriving, and the RTO
fires at srtt/2 after the last ACK. But that can take far too long
(O(10 secs)), since the connection is stuck in fast recovery with a
low cwnd that cannot grow beyond ssthresh, even if more bandwidth is
available.
This fix changes the logic in tcp_check_sack_reneging() to only rearm
the RTO timer if data is cumulatively ACKed, indicating forward
progress. This avoids this kind of nearly infinite loop of RTO timer
re-arming. In addition, this meets the goals of
tcp_check_sack_reneging() in handling Windows TCP behavior that looks
temporarily like SACK reneging but is not really.
Many thanks to Jakub Kicinski and Neil Spring, who reported this issue
and provided critical packet traces that enabled root-causing this
issue. Also, many thanks to Jakub Kicinski for testing this fix.
Fixes: 5ae344c949e7 ("tcp: reduce spurious retransmits due to transient SACK reneging") Reported-by: Jakub Kicinski <kuba@kernel.org> Reported-by: Neil Spring <ntspring@fb.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Tested-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20221021170821.1093930-1-ncardwell.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 24 Oct 2022 17:32:00 +0000 (10:32 -0700)]
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2022-10-23
We've added 7 non-merge commits during the last 18 day(s) which contain
a total of 8 files changed, 69 insertions(+), 5 deletions(-).
The main changes are:
1) Wait for busy refill_work when destroying bpf memory allocator, from Hou.
2) Allow bpf_user_ringbuf_drain() callbacks to return 1, from David.
3) Fix dispatcher patchable function entry to 5 bytes nop, from Jiri.
4) Prevent decl_tag from being referenced in func_proto, from Stanislav.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Use __llist_del_all() whenever possbile during memory draining
bpf: Wait for busy refill_work when destroying bpf memory allocator
bpf: Fix dispatcher patchable function entry to 5 bytes nop
bpf: prevent decl_tag from being referenced in func_proto
selftests/bpf: Add reproducer for decl_tag in func_proto return type
selftests/bpf: Make bpf_user_ringbuf_drain() selftest callback return 1
bpf: Allow bpf_user_ringbuf_drain() callbacks to return 1
====================
David S. Miller [Mon, 24 Oct 2022 12:10:40 +0000 (13:10 +0100)]
Merge branch 'ptp-ocxp-Oroli-ART-CARD'
Vadim Fedorenko says:
====================
ptp: ocp: add support for Orolia ART-CARD
Orolia company created alternative open source TimeCard. The hardware of
the card provides similar to OCP's card functions, that's why the support
is added to current driver.
The first patch in the series changes the way to store information about
serial ports and is more like preparation.
The patches 2 to 4 introduces actual hardware support.
The last patch removes fallback from devlink flashing interface to protect
against flashing wrong image. This became actual now as we have 2 different
boards supported and wrong image can ruin hardware easily.
v2:
Address comments from Jonathan Lemon
v3:
Fix issue reported by kernel test robot <lkp@intel.com>
v4:
Fix clang build issue
v5:
Fix warnings and per-patch build errors
v6:
Fix more style issues
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously there was a fallback mode to flash firmware image without
proper header. But now we have different supported vendors and flashing
wrong image could destroy the hardware. Remove fallback mode and force
header check. Both vendors have published firmware images with headers.
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Vadim Fedorenko <vadfed@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Fedorenko [Thu, 20 Oct 2022 23:24:32 +0000 (02:24 +0300)]
ptp: ocp: expose config and temperature for ART card
Orolia card has disciplining configuration and temperature table
stored in EEPROM. This patch exposes them as binary attributes to
have read and write access.
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Co-developed-by: Charles Parent <charles.parent@orolia2s.com> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Vadim Fedorenko <vadfed@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Fedorenko [Thu, 20 Oct 2022 23:24:31 +0000 (02:24 +0300)]
ptp: ocp: add serial port of mRO50 MAC on ART card
ART card provides interface to access to serial port of miniature atomic
clock found on the card. Add support for this device and configure it
during init phase.
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Co-developed-by: Charles Parent <charles.parent@orolia2s.com> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Vadim Fedorenko <vadfed@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Fedorenko [Thu, 20 Oct 2022 23:24:30 +0000 (02:24 +0300)]
ptp: ocp: add Orolia timecard support
This brings in the Orolia timecard support from the GitHub repository.
The card uses different drivers to provide access to i2c EEPROM and
firmware SPI flash. And it also has a bit different EEPROM map, but
other parts of the code are the same and could be reused.
Co-developed-by: Charles Parent <charles.parent@orolia2s.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Vadim Fedorenko <vadfed@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Fedorenko [Thu, 20 Oct 2022 23:24:29 +0000 (02:24 +0300)]
ptp: ocp: upgrade serial line information
Introduce structure to hold serial port line number and the baud rate
it supports.
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Vadim Fedorenko <vadfed@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lu Wei [Fri, 21 Oct 2022 04:06:22 +0000 (12:06 +0800)]
tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
The type of sk_rcvbuf and sk_sndbuf in struct sock is int, and
in tcp_add_backlog(), the variable limit is caculated by adding
sk_rcvbuf, sk_sndbuf and 64 * 1024, it may exceed the max value
of int and overflow. This patch reduces the limit budget by
halving the sndbuf to solve this issue since ACK packets are much
smaller than the payload.
Fixes: c9c3321257e1 ("tcp: add tcp_add_backlog()") Signed-off-by: Lu Wei <luwei32@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Fri, 21 Oct 2022 02:58:22 +0000 (10:58 +0800)]
net: skb: move skb_pp_recycle() to skbuff.c
skb_pp_recycle() is only used by skb_free_head() in
skbuff.c, so move it to skbuff.c.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Nick Child [Thu, 20 Oct 2022 21:40:52 +0000 (16:40 -0500)]
ibmveth: Always stop tx queues during close
netif_stop_all_queues must be called before calling H_FREE_LOGICAL_LAN.
As a result, we can remove the pool_config field from the ibmveth
adapter structure.
Some device configuration changes call ibmveth_close in order to free
the current resources held by the device. These functions then make
their changes and call ibmveth_open to reallocate and reserve resources
for the device.
Prior to this commit, the flag pool_config was used to tell ibmveth_close
that it should not halt the transmit queue. pool_config was introduced in
commit 860f242eb534 ("[PATCH] ibmveth change buffer pools dynamically")
to avoid interrupting the tx flow when making rx config changes. Since
then, other commits adopted this approach, even if making tx config
changes.
The issue with this approach was that the hypervisor freed all of
the devices control structures after the hcall H_FREE_LOGICAL_LAN
was performed but the transmit queues were never stopped. So the higher
layers in the network stack would continue transmission but any
H_SEND_LOGICAL_LAN hcall would fail with H_PARAMETER until the
hypervisor's structures for the device were allocated with the
H_REGISTER_LOGICAL_LAN hcall in ibmveth_open. This resulted in
no real networking harm but did cause several of these error
messages to be logged: "h_send_logical_lan failed with rc=-4"
So, instead of trying to keep the transmit queues alive during network
configuration changes, just stop the queues, make necessary changes then
restart the queues.
Signed-off-by: Nick Child <nnac123@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Fang [Thu, 20 Oct 2022 04:35:56 +0000 (12:35 +0800)]
net: fec: Add support for periodic output signal of PPS
This patch adds the support for configuring periodic output
signal of PPS. So the PPS can be output at a specified time
and period.
For developers or testers, they can use the command "echo
<channel> <start.sec> <start.nsec> <period.sec> <period.
nsec> > /sys/class/ptp/ptp0/period" to specify time and
period to output PPS signal.
Notice that, the channel can only be set to 0. In addtion,
the start time must larger than the current PTP clock time.
So users can use the command "phc_ctl /dev/ptp0 -- get" to
get the current PTP clock time before.
Signed-off-by: Wei Fang <wei.fang@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Thu, 20 Oct 2022 02:42:13 +0000 (10:42 +0800)]
net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed
When the ops_init() interface is invoked to initialize the net, but
ops->init() fails, data is released. However, the ptr pointer in
net->gen is invalid. In this case, when nfqnl_nf_hook_drop() is invoked
to release the net, invalid address access occurs.
The process is as follows:
setup_net()
ops_init()
data = kzalloc(...) ---> alloc "data"
net_assign_generic() ---> assign "date" to ptr in net->gen
...
ops->init() ---> failed
...
kfree(data); ---> ptr in net->gen is invalid
...
ops_exit_list()
...
nfqnl_nf_hook_drop()
*q = nfnl_queue_pernet(net) ---> q is invalid
The following is the Call Trace information:
BUG: KASAN: use-after-free in nfqnl_nf_hook_drop+0x264/0x280
Read of size 8 at addr ffff88810396b240 by task ip/15855
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
print_report+0x155/0x454
kasan_report+0xba/0x1f0
nfqnl_nf_hook_drop+0x264/0x280
nf_queue_nf_hook_drop+0x8b/0x1b0
__nf_unregister_net_hook+0x1ae/0x5a0
nf_unregister_net_hooks+0xde/0x130
ops_exit_list+0xb0/0x170
setup_net+0x7ac/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
Fixes: f875bae06533 ("net: Automatically allocate per namespace data.") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 20 Oct 2022 23:20:18 +0000 (23:20 +0000)]
net: add a refcount tracker for kernel sockets
Commit ffa84b5ffb37 ("net: add netns refcount tracker to struct sock")
added a tracker to sockets, but did not track kernel sockets.
We still have syzbot reports hinting about netns being destroyed
while some kernel TCP sockets had not been dismantled.
This patch tracks kernel sockets, and adds a ref_tracker_dir_print()
call to net_free() right before the netns is freed.
Normally, each layer is responsible for properly releasing its
kernel sockets before last call to net_free().
This debugging facility is enabled with CONFIG_NET_NS_REFCNT_TRACKER=y
Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Tested-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 20 Oct 2022 18:30:31 +0000 (11:30 -0700)]
docs: netdev: offer performance feedback to contributors
Some of us gotten used to producing large quantities of peer feedback
at work, every 3 or 6 months. Extending the same courtesy to community
members seems like a logical step. It may be hard for some folks to
get validation of how important their work is internally, especially
at smaller companies which don't employ many kernel experts.
The concept of "peer feedback" may be a hyperscaler / silicon valley
thing so YMMV. Hopefully we can build more context as we go.
Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 17869 Comm: syz-executor.2 Not tainted 6.1.0-rc1-syzkaller-00010-gbb1a1146467a-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
value changed: 0xffff88812971ce00 -> 0x0000000000000000
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 5859 Comm: syz-executor.3 Not tainted 6.0.0-syzkaller-12189-g19d17ab7c68b-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 24 Oct 2022 09:52:50 +0000 (10:52 +0100)]
Merge branch 'udp-false-sharing'
Paolo Abeni says:
====================
udp: avoid false sharing on receive
Under high UDP load, the BH processing and the user-space receiver can
run on different cores.
The UDP implementation does a lot of effort to avoid false sharing in
the receive path, but recent changes to the struct sock layout moved
the sk_forward_alloc and the sk_rcvbuf fields on the same cacheline:
/* --- cacheline 4 boundary (256 bytes) --- */
struct sk_buff * tail;
} sk_backlog;
int sk_forward_alloc;
unsigned int sk_reserved_mem;
unsigned int sk_ll_usec;
unsigned int sk_napi_id;
int sk_rcvbuf;
sk_forward_alloc is updated by the BH, while sk_rcvbuf is accessed by
udp_recvmsg(), causing false sharing.
A possible solution would be to re-order the struct sock fields to avoid
the false sharing. Such change is subject to being invalidated by future
changes and could have negative side effects on other workload.
Instead this series uses a different approach, touching only the UDP
socket layout.
The first patch generalizes the custom setsockopt infrastructure, to
allow UDP tracking the buffer size, and the second patch addresses the
issue, copying the relevant buffer information into an already hot
cacheline.
Overall the above gives a 10% peek throughput increase under UDP flood.
v1 -> v2:
- introduce and use a common helper to initialize the UDP v4/v6 sockets
(Kuniyuki)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Thu, 20 Oct 2022 17:48:52 +0000 (19:48 +0200)]
udp: track the forward memory release threshold in an hot cacheline
When the receiver process and the BH runs on different cores,
udp_rmem_release() experience a cache miss while accessing sk_rcvbuf,
as the latter shares the same cacheline with sk_forward_alloc, written
by the BH.
With this patch, UDP tracks the rcvbuf value and its update via custom
SOL_SOCKET socket options, and copies the forward memory threshold value
used by udp_rmem_release() in a different cacheline, already accessed by
the above function and uncontended.
Since the UDP socket init operation grown a bit, factor out the common
code between v4 and v6 in a shared helper.
Overall the above give a 10% peek throughput increase under UDP flood.
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Thu, 20 Oct 2022 17:48:51 +0000 (19:48 +0200)]
net: introduce and use custom sockopt socket flag
We will soon introduce custom setsockopt for UDP sockets, too.
Instead of doing even more complex arbitrary checks inside
sock_use_custom_sol_socket(), add a new socket flag and set it
for the relevant socket types (currently only MPTCP).
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Anderson [Thu, 20 Oct 2022 15:50:41 +0000 (11:50 -0400)]
net: fman: Use physical address for userspace interfaces
Before 262f2b782e25 ("net: fman: Map the base address once"), the
physical address of the MAC was exposed to userspace in two places: via
sysfs and via SIOCGIFMAP. While this is not best practice, it is an
external ABI which is in use by userspace software.
The aforementioned commit inadvertently modified these addresses and
made them virtual. This constitutes and ABI break. Additionally, it
leaks the kernel's memory layout to userspace. Partially revert that
commit, reintroducing the resource back into struct mac_device, while
keeping the intended changes (the rework of the address mapping).
Fixes: 262f2b782e25 ("net: fman: Map the base address once") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 24 Oct 2022 09:43:39 +0000 (10:43 +0100)]
Merge branch 'net-800Gbps-support'
Petr Machata says:
====================
net: Add support for 800Gbps speed
Amit Cohen <amcohen@nvidia.com> writes:
The next Nvidia Spectrum ASIC will support 800Gbps speed.
The IEEE 802 LAN/MAN Standards Committee already published standards for
800Gbps, see the last update [1] and the list of approved changes [2].
As first phase, add support for 800Gbps over 8 lanes (100Gbps/lane).
In the future 800Gbps over 4 lanes can be supported also.
Extend ethtool to support the relevant PMDs and extend mlxsw and bonding
drivers to support 800Gbps.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 20 Oct 2022 15:20:05 +0000 (17:20 +0200)]
bonding: 3ad: Add support for 800G speed
Add support for 800Gbps speed to allow using 3ad mode with 800G devices.
Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 20 Oct 2022 15:20:04 +0000 (17:20 +0200)]
mlxsw: Add support for 800Gbps link modes
Add support for 800Gbps speed, link modes of 100Gbps per lane.
Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 20 Oct 2022 15:20:03 +0000 (17:20 +0200)]
ethtool: Add support for 800Gbps link modes
Add support for 800Gbps speed, link modes of 100Gbps per lane.
As mentioned in slide 21 in IEEE documentation [1], all adopted 802.3df
copper and optical PMDs baselines using 100G/lane will be supported.
Add the relevant PMDs which are mentioned in slide 5 in IEEE
documentation [1] and were approved on 10-2022 [2]:
BP - KR8
Cu Cable - CR8
MMF 50m - VR8
MMF 100m - SR8
SMF 500m - DR8
SMF 2km - DR8-2
Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 24 Oct 2022 09:37:43 +0000 (10:37 +0100)]
Merge branch 'sparx5-IS2-VCAP'
Steen Hegelund says:
====================
Add support for Sparx5 IS2 VCAP
This provides initial support for the Sparx5 VCAP functionality via the
'tc' traffic control userspace tool and its flower filter.
Overview:
=========
The supported flower filter keys and actions are:
- source and destination MAC address keys
- trap action
- pass action
The supported Sparx5 VCAPs are: IS2 (see below for more info)
The VCAP (Versatile Content-Aware Processor) feature is essentially a TCAM
with rules consisting of:
- Programmable key fields
- Programmable action fields
- A counter (which may be only one bit wide)
Besides this each VCAP has:
- A number of independent lookups
- A keyset configuration typically per port per lookup
VCAPs are used in many of the TSN features such as PSFP, PTP, FRER as well
as the general shaping, policing and access control, so it is an important
building block for these advanced features.
Functionality:
==============
When a frame is passed to a VCAP the VCAP will generate a set of keys
(keyset) based on the traffic type. If there is a rule created with this
keyset in the VCAP and the values of the keys matches the values in the
keyset of the frame, the rule is said to match and the actions in the rule
will be executed and the rule counter will be incremented. No more rules
will be examined in this VCAP lookup.
If there is no match in the current lookup the frame will be matched
against the next lookup (some VCAPs do the processing of the lookups in
parallel).
The Sparx5 SoC has 6 different VCAP types:
- IS0: Ingress Stage 0 (AKA CLM) mostly handles classification
- IS2: Ingress Stage 2 mostly handles access control
- IP6PFX: IPv6 prefix: Provides tables for IPV6 address management
- LPM: Longest Path Match for IP guarding and routing
- ES0: Egress Stage 0 is mostly used for CPU copying and multicast handling
- ES2: Egress Stage 2 is known as the rewriter and mostly updates tags
Design:
=======
The VCAP implementation provides switchcore independent handling of rules
and supports:
- Creating and deleting rules
- Updating and getting rules
The platform specific API implementation as well as the platform specific
model of the VCAP instances are attached to the VCAP API and a client can
then access rules via the API in a platform independent way, with the
limitations that each VCAP has in terms of is supported keys and actions.
The VCAP model is generated from information delivered by the designers of
the VCAP hardware.
These lookups are executed in parallel by the IS2 VCAP but the actions are
executed in series (the datasheet explains what happens if actions
overlap).
The functionality of TC flower as well as TC matchall filters will be
expanded in later submissions as well as the number of VCAPs supported.
This is current plan:
- add support for more TC flower filter keys and extend the Sparx5 port
keyset configuration
- support for TC protocol all
- debugfs support for inspecting rules
- TC flower filter statistics
- Sparx5 IS0 VCAP support and more TC keys and actions to support this
- add TC policer and drop action support (depends on the Sparx5 QoS support
upstreamed separately)
- Sparx5 ES0 VCAP support and more TC actions to support this
- TC flower template support
- TC matchall filter support for mirroring and policing ports
- TC flower filter mirror action support
- Sparx5 ES2 VCAP support
The LAN966x switchcore will also be updated to use the VCAP API as well as
future Microchip switches.
The LAN966x has 3 VCAPS (IS1, IS2 and ES0) and a slightly different keyset
and actionset portfolio than Sparx5.
Version History:
================
v3 Moved the sparx5_tc_flower_set_exterr function to the VCAP API and
renamed it.
Moved the sparx5_netbytes_copy function to the VCAP_API and renamed
it (thanks Horatiu Vultur).
Fixed indentation in the vcap_write_rule function.
Added a comment mentioning the typegroup table terminator in the
vcap_iter_skip_tg function.
v2 Made the KUNIT test model a superset of the real model to fix a
kernel robot build error.
v1 Initial version
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 20 Oct 2022 13:09:02 +0000 (15:09 +0200)]
net: microchip: sparx5: Writing rules to the IS2 VCAP
This adds rule encoding functionality to the VCAP API.
A rule consists of keys and actions in separate cache sections.
The maximum size of the keyset or actionset determines the size of the
rule.
The VCAP hardware need to be able to distinguish different rule sizes from
each other, and for that purpose some extra typegroup bits are added to the
rule when it is encoded.
The API provides a bit stream iterator that allows highlevel encoding
functionality to add key and action value bits independent of typegroup
bits.
This is handled by letting the concrete VCAP model provide the typegroup
table for the different rule sizes.
After the key and action values have been added to the encoding bit streams
the typegroup bits are set to their correct values just before the rule is
written to the VCAP hardware.
The key and action offsets provided in the VCAP model are the offset before
adding the typegroup bits.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Tested-by: Casper Andersson <casper.casan@gmail.com> Reviewed-by: Casper Andersson <casper.casan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / mirror_ubuntu-kernels.git / log