Felix Jia [Sun, 26 Feb 2017 23:41:23 +0000 (12:41 +1300)]
net/ipv6: avoid possible dead locking on addr_gen_mode sysctl
The addr_gen_mode variable can be accessed by both sysctl and netlink.
Repleacd rtnl_lock() with rtnl_trylock() protect the sysctl operation to
avoid the possbile dead lock.`
Signed-off-by: Felix Jia <felix.jia@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 1 Mar 2017 17:58:46 +0000 (09:58 -0800)]
Merge branch 'vxlan-geneve-rcu-fixes'
Jakub Kicinski says:
====================
VXLAN/geneve RCU fixes
VXLAN and GENEVE need to take RCU lock explicitly because TX path
only has the _bh() flavour of RCU locked. Making the reconfiguration
path wait for both normal and _bh() RCU would be bigger hassle so
just acquire the lock, as suggested by Pravin:
Jakub Kicinski [Fri, 24 Feb 2017 19:43:37 +0000 (11:43 -0800)]
geneve: lock RCU on TX path
There is no guarantees that callers of the TX path will hold
the RCU lock. Grab it explicitly.
Fixes: fceb9c3e3825 ("geneve: avoid using stale geneve socket.") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 24 Feb 2017 19:43:36 +0000 (11:43 -0800)]
vxlan: lock RCU on TX path
There is no guarantees that callers of the TX path will hold
the RCU lock. Grab it explicitly.
Fixes: c6fcc4fc5f8b ("vxlan: avoid using stale vxlan socket.") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 28 Feb 2017 18:34:50 +0000 (10:34 -0800)]
net: solve a NAPI race
While playing with mlx4 hardware timestamping of RX packets, I found
that some packets were received by TCP stack with a ~200 ms delay...
Since the timestamp was provided by the NIC, and my probe was added
in tcp_v4_rcv() while in BH handler, I was confident it was not
a sender issue, or a drop in the network.
This would happen with a very low probability, but hurting RPC
workloads.
A NAPI driver normally arms the IRQ after the napi_complete_done(),
after NAPI_STATE_SCHED is cleared, so that the hard irq handler can grab
it.
Problem is that if another point in the stack grabs NAPI_STATE_SCHED bit
while IRQ are not disabled, we might have later an IRQ firing and
finding this bit set, right before napi_complete_done() clears it.
This can happen with busy polling users, or if gro_flush_timeout is
used. But some other uses of napi_schedule() in drivers can cause this
as well.
thread 1 thread 2 (could be on same cpu, or not)
// busy polling or napi_watchdog()
napi_schedule();
...
napi->poll()
device polling:
read 2 packets from ring buffer
Additional 3rd packet is
available.
device hard irq
// does nothing because
NAPI_STATE_SCHED bit is owned by thread 1
napi_schedule();
napi_complete_done(napi, 2);
rearm_irq();
Note that rearm_irq() will not force the device to send an additional
IRQ for the packet it already signaled (3rd packet in my example)
This patch adds a new NAPI_STATE_MISSED bit, that napi_schedule_prep()
can set if it could not grab NAPI_STATE_SCHED
Then napi_complete_done() properly reschedules the napi to make sure
we do not miss something.
Since we manipulate multiple bits at once, use cmpxchg() like in
sk_busy_loop() to provide proper transactions.
In v2, I changed napi_watchdog() to use a relaxed variant of
napi_schedule_prep() : No need to set NAPI_STATE_MISSED from this point.
In v3, I added more details in the changelog and clears
NAPI_STATE_MISSED in busy_poll_stop()
In v4, I added the ideas given by Alexander Duyck in v3 review
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Tue, 28 Feb 2017 12:02:15 +0000 (15:02 +0300)]
net/mlx4: && vs & typo
Bitwise & was obviously intended here.
Fixes: 745d8ae4622c ("net/mlx4: Spoofcheck and zero MAC can't coexist") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Tue, 28 Feb 2017 11:58:22 +0000 (11:58 +0000)]
net: usb: asix_devices: fix missing return code check on call to asix_write_medium_mode
The call to asix_write_medium_mode is not updating the return code ret
and yet ret is being checked for an error. Fix this by assigning ret to
the return code from the call asix_write_medium_mode.
Detected by CoverityScan, CID#1357148 ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 28 Feb 2017 07:55:40 +0000 (08:55 +0100)]
mlxsw: spectrum_router: Avoid potential packets loss
When the structure of the LPM tree changes (f.e., due to the addition of
a new prefix), we unbind the old tree and then bind the new one. This
may result in temporary packet loss.
Instead, overwrite the old binding with the new one.
Fixes: 6b75c4807db3 ("mlxsw: spectrum_router: Add virtual router management") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Zhu Yanjun [Tue, 28 Feb 2017 06:45:40 +0000 (01:45 -0500)]
rds: ib: add the static type to the variables
The variables rds_ib_mr_1m_pool_size and rds_ib_mr_8k_pool_size
are used only in the ib.c file. As such, the static type is
added to limit them in this file.
Cc: Joe Jin <joe.jin@oracle.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 28 Feb 2017 04:41:29 +0000 (12:41 +0800)]
sctp: call rcu_read_lock before checking for duplicate transport nodes
Commit cd2b70875058 ("sctp: check duplicate node before inserting a
new transport") called rhltable_lookup() to check for the duplicate
transport node in transport rhashtable.
But rhltable_lookup() doesn't call rcu_read_lock inside, it could cause
a use-after-free issue if it tries to dereference the node that another
cpu has freed it. Note that sock lock can not avoid this as it is per
sock.
This patch is to fix it by calling rcu_read_lock before checking for
duplicate transport nodes.
Fixes: cd2b70875058 ("sctp: check duplicate node before inserting a new transport") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Mon, 27 Feb 2017 15:43:06 +0000 (15:43 +0000)]
rxrpc: Fix deadlock between call creation and sendmsg/recvmsg
All the routines by which rxrpc is accessed from the outside are serialised
by means of the socket lock (sendmsg, recvmsg, bind,
rxrpc_kernel_begin_call(), ...) and this presents a problem:
(1) If a number of calls on the same socket are in the process of
connection to the same peer, a maximum of four concurrent live calls
are permitted before further calls need to wait for a slot.
(2) If a call is waiting for a slot, it is deep inside sendmsg() or
rxrpc_kernel_begin_call() and the entry function is holding the socket
lock.
(3) sendmsg() and recvmsg() or the in-kernel equivalents are prevented
from servicing the other calls as they need to take the socket lock to
do so.
(4) The socket is stuck until a call is aborted and makes its slot
available to the waiter.
Fix this by:
(1) Provide each call with a mutex ('user_mutex') that arbitrates access
by the users of rxrpc separately for each specific call.
(2) Make rxrpc_sendmsg() and rxrpc_recvmsg() unlock the socket as soon as
they've got a call and taken its mutex.
Note that I'm returning EWOULDBLOCK from recvmsg() if MSG_DONTWAIT is
set but someone else has the lock. Should I instead only return
EWOULDBLOCK if there's nothing currently to be done on a socket, and
sleep in this particular instance because there is something to be
done, but we appear to be blocked by the interrupt handler doing its
ping?
(3) Make rxrpc_new_client_call() unlock the socket after allocating a new
call, locking its user mutex and adding it to the socket's call tree.
The call is returned locked so that sendmsg() can add data to it
immediately.
From the moment the call is in the socket tree, it is subject to
access by sendmsg() and recvmsg() - even if it isn't connected yet.
(4) Lock new service calls in the UDP data_ready handler (in
rxrpc_new_incoming_call()) because they may already be in the socket's
tree and the data_ready handler makes them live immediately if a user
ID has already been preassigned.
Note that the new call is locked before any notifications are sent
that it is live, so doing mutex_trylock() *ought* to always succeed.
Userspace is prevented from doing sendmsg() on calls that are in a
too-early state in rxrpc_do_sendmsg().
(5) Make rxrpc_new_incoming_call() return the call with the user mutex
held so that a ping can be scheduled immediately under it.
Note that it might be worth moving the ping call into
rxrpc_new_incoming_call() and then we can drop the mutex there.
(6) Make rxrpc_accept_call() take the lock on the call it is accepting and
release the socket after adding the call to the socket's tree. This
is slightly tricky as we've dequeued the call by that point and have
to requeue it.
Note that requeuing emits a trace event.
(7) Make rxrpc_kernel_send_data() and rxrpc_kernel_recv_data() take the
new mutex immediately and don't bother with the socket mutex at all.
This patch has the nice bonus that calls on the same socket are now to some
extent parallelisable.
Note that we might want to move rxrpc_service_prealloc() calls out from the
socket lock and give it its own lock, so that we don't hang progress in
other calls because we're waiting for the allocator.
We probably also want to avoid calling rxrpc_notify_socket() from within
the socket lock (rxrpc_accept_call()).
Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marc Dionne <marc.c.dionne@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 1 Mar 2017 05:06:30 +0000 (21:06 -0800)]
Merge tag 'for-linus-4.11' of git://git.code.sf.net/p/openipmi/linux-ipmi
Pull IPMI updates from Corey Minyard:
"This is a few small fixes to the main IPMI driver, make some things
const, fix typos, etc.
The last patch came in about a week ago, but IMHO it's best to go in
now. It is not for the main driver, it's for the bt-bmc driver, which
runs on the managment controller side, not on the host side, so the
scope is limited and the change is necessary"
* tag 'for-linus-4.11' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi: bt-bmc: Use a regmap for register access
char: ipmi: constify ipmi_smi_handlers structures
acpi:ipmi: Make IPMI user handler const
ipmi: make ipmi_usr_hndl const
Documentation: Fix a typo in IPMI.txt.
Linus Torvalds [Wed, 1 Mar 2017 04:29:41 +0000 (20:29 -0800)]
Merge branch 'idr-4.11' of git://git.infradead.org/users/willy/linux-dax
Pull IDR rewrite from Matthew Wilcox:
"The most significant part of the following is the patch to rewrite the
IDR & IDA to be clients of the radix tree. But there's much more,
including an enhancement of the IDA to be significantly more space
efficient, an IDR & IDA test suite, some improvements to the IDR API
(and driver changes to take advantage of those improvements), several
improvements to the radix tree test suite and RCU annotations.
The IDR & IDA rewrite had a good spin in linux-next and Andrew's tree
for most of the last cycle. Coupled with the IDR test suite, I feel
pretty confident that any remaining bugs are quite hard to hit. 0-day
did a great job of watching my git tree and pointing out problems; as
it hit them, I added new test-cases to be sure not to be caught the
same way twice"
Willy goes on to expand a bit on the IDR rewrite rationale:
"The radix tree and the IDR use very similar data structures.
Merging the two codebases lets us share the memory allocation pools,
and results in a net deletion of 500 lines of code. It also opens up
the possibility of exposing more of the features of the radix tree to
users of the IDR (and I have some interesting patches along those
lines waiting for 4.12)
It also shrinks the size of the 'struct idr' from 40 bytes to 24 which
will shrink a fair few data structures that embed an IDR"
* 'idr-4.11' of git://git.infradead.org/users/willy/linux-dax: (32 commits)
radix tree test suite: Add config option for map shift
idr: Add missing __rcu annotations
radix-tree: Fix __rcu annotations
radix-tree: Add rcu_dereference and rcu_assign_pointer calls
radix tree test suite: Run iteration tests for longer
radix tree test suite: Fix split/join memory leaks
radix tree test suite: Fix leaks in regression2.c
radix tree test suite: Fix leaky tests
radix tree test suite: Enable address sanitizer
radix_tree_iter_resume: Fix out of bounds error
radix-tree: Store a pointer to the root in each node
radix-tree: Chain preallocated nodes through ->parent
radix tree test suite: Dial down verbosity with -v
radix tree test suite: Introduce kmalloc_verbose
idr: Return the deleted entry from idr_remove
radix tree test suite: Build separate binaries for some tests
ida: Use exceptional entries for small IDAs
ida: Move ida_bitmap to a percpu variable
Reimplement IDR and IDA using the radix tree
radix-tree: Add radix_tree_iter_delete
...
Linus Torvalds [Wed, 1 Mar 2017 04:18:44 +0000 (20:18 -0800)]
Merge tag 'iommu-fix-v4.11-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Fix an issue introduced this merge window into the AMD and Intel IOMMU
drivers that causes an oops when the vendor-specific sysfs-entries are
accessed.
The reason for this issue is that I forgot to update the sysfs code in
the drivers when moving the iommu 'struct device' to the iommu-core"
* tag 'iommu-fix-v4.11-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix crash when accessing AMD-Vi sysfs entries
iommu/vt-d: Fix crash when accessing VT-d sysfs entries
Linus Torvalds [Tue, 28 Feb 2017 23:39:09 +0000 (15:39 -0800)]
Merge tag 'nfsd-4.11' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"The nfsd update this round is mainly a lot of miscellaneous cleanups
and bugfixes.
A couple changes could theoretically break working setups on upgrade.
I don't expect complaints in practice, but they seem worth calling out
just in case:
- NFS security labels are now off by default; a new security_label
export flag reenables it per export. But, having them on by default
is a disaster, as it generally only makes sense if all your clients
and servers have similar enough selinux policies. Thanks to Jason
Tibbitts for pointing this out.
- NFSv4/UDP support is off. It was never really supported, and the
spec explicitly forbids it. We only ever left it on out of
laziness; thanks to Jeff Layton for finally fixing that"
* tag 'nfsd-4.11' of git://linux-nfs.org/~bfields/linux: (34 commits)
nfsd: Fix display of the version string
nfsd: fix configuration of supported minor versions
sunrpc: don't register UDP port with rpcbind when version needs congestion control
nfs/nfsd/sunrpc: enforce transport requirements for NFSv4
sunrpc: flag transports as having congestion control
sunrpc: turn bitfield flags in svc_version into bools
nfsd: remove superfluous KERN_INFO
nfsd: special case truncates some more
nfsd: minor nfsd_setattr cleanup
NFSD: Reserve adequate space for LOCKT operation
NFSD: Get response size before operation for all RPCs
nfsd/callback: Drop a useless data copy when comparing sessionid
nfsd/callback: skip the callback tag
nfsd/callback: Cleanup callback cred on shutdown
nfsd/idmap: return nfserr_inval for 0-length names
SUNRPC/Cache: Always treat the invalid cache as unexpired
SUNRPC: Drop all entries from cache_detail when cache_purge()
svcrdma: Poll CQs in "workqueue" mode
svcrdma: Combine list fields in struct svc_rdma_op_ctxt
svcrdma: Remove unused sc_dto_q field
...
Linus Torvalds [Tue, 28 Feb 2017 23:36:09 +0000 (15:36 -0800)]
Merge tag 'ceph-for-4.11-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"This time around we have:
- support for rbd data-pool feature, which enables rbd images on
erasure-coded pools (myself). CEPH_PG_MAX_SIZE has been bumped to
allow erasure-coded profiles with k+m up to 32.
- a patch for ceph_d_revalidate() performance regression introduced
in 4.9, along with some cleanups in the area (Jeff Layton)
- a set of fixes for unsafe ->d_parent accesses in CephFS (Jeff
Layton)
- buffered reads are now processed in rsize windows instead of rasize
windows (Andreas Gerstmayr). The new default for rsize mount option
is 64M.
- ack vs commit distinction is gone, greatly simplifying ->fsync()
and MOSDOpReply handling code (myself)
... also a few filesystem bug fixes from Zheng, a CRUSH sync up (CRUSH
computations are still serialized though) and several minor fixes and
cleanups all over"
* tag 'ceph-for-4.11-rc1' of git://github.com/ceph/ceph-client: (52 commits)
libceph, rbd, ceph: WRITE | ONDISK -> WRITE
libceph: get rid of ack vs commit
ceph: remove special ack vs commit behavior
ceph: tidy some white space in get_nonsnap_parent()
crush: fix dprintk compilation
crush: do is_out test only if we do not collide
ceph: remove req from unsafe list when unregistering it
rbd: constify device_type structure
rbd: kill obj_request->object_name and rbd_segment_name_cache
rbd: store and use obj_request->object_no
rbd: RBD_V{1,2}_DATA_FORMAT macros
rbd: factor out __rbd_osd_req_create()
rbd: set offset and length outside of rbd_obj_request_create()
rbd: support for data-pool feature
rbd: introduce rbd_init_layout()
rbd: use rbd_obj_bytes() more
rbd: remove now unused rbd_obj_request_wait() and helpers
rbd: switch rbd_obj_method_sync() to ceph_osdc_call()
libceph: pass reply buffer length through ceph_osdc_call()
rbd: do away with obj_request in rbd_obj_read_sync()
...
Linus Torvalds [Tue, 28 Feb 2017 19:46:00 +0000 (11:46 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two documentation updates, plus a debugging annotation fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/crash: Update the stale comment in reserve_crashkernel()
x86/irq, trace: Add __irq_entry annotation to x86's platform IRQ handlers
Documentation, x86, resctrl: Recommend locking for resctrlfs
Linus Torvalds [Tue, 28 Feb 2017 19:44:01 +0000 (11:44 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Two rq-clock warnings related fixes, plus a cgroups related crash fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cgroup: Move sched_online_group() back into css_online() to fix crash
sched/fair: Update rq clock before changing a task's CPU affinity
sched/core: Fix update_rq_clock() splat on hotplug (and suspend/resume)
Linus Torvalds [Tue, 28 Feb 2017 18:44:16 +0000 (10:44 -0800)]
Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"The main change is the uninlining of large refcount_t APIs, plus a
header dependency fix.
Note that the uninlining allowed us to enable the underflow/overflow
warnings unconditionally and remove the debug Kconfig switch: this
might trigger new warnings in buggy code and turn
crashes/use-after-free bugs into less harmful memory leaks"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/refcounts: Add missing kernel.h header to have UINT_MAX defined
locking/refcounts: Out-of-line everything
Linus Torvalds [Tue, 28 Feb 2017 18:15:59 +0000 (10:15 -0800)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"A handful of objtool fixes related to unreachable code, plus a build
fix for out of tree modules"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Enclose contents of unreachable() macro in a block
objtool: Prevent GCC from merging annotate_unreachable()
objtool: Improve detection of BUG() and other dead ends
objtool: Fix CONFIG_STACK_VALIDATION=y warning for out-of-tree modules
Pull IDE updates from David Miller:
"Just one actual change here this time around, adding some init data
annotations. The other change was bogus and got reverted"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
ide: palm_bk3710: add __initdata to palm_bk3710_port_info
Revert "ide: Fix interface autodetection in legacy IDE driver (trial #2)"
ide: Fix interface autodetection in legacy IDE driver (trial #2)
1) Don't save TIPC header values before the header has been validated,
from Jon Paul Maloy.
2) Fix memory leak in RDS, from Zhu Yanjun.
3) We miss to initialize the UID in the flow key in some paths, from
Julian Anastasov.
4) Fix latent TOS masking bug in the routing cache removal from years
ago, also from Julian.
5) We forget to set the sockaddr port in sctp_copy_local_addr_list(),
fix from Xin Long.
6) Missing module ref count drop in packet scheduler actions, from
Roman Mashak.
7) Fix RCU annotations in rht_bucket_nested, from Herbert Xu.
8) Fix use after free which happens because L2TP's ipv4 support returns
non-zero values from it's backlog_rcv function which ipv4 interprets
as protocol values. Fix from Paul Hüber.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
qed: Don't use attention PTT for configuring BW
qed: Fix race with multiple VFs
l2tp: avoid use-after-free caused by l2tp_ip_backlog_recv
xfrm: provide correct dst in xfrm_neigh_lookup
rhashtable: Fix RCU dereference annotation in rht_bucket_nested
rhashtable: Fix use before NULL check in bucket_table_free
net sched actions: do not overwrite status of action creation.
rxrpc: Kernel calls get stuck in recvmsg
net sched actions: decrement module reference count after table flush.
lib: Allow compile-testing of parman
ipv6: check sk sk_type and protocol early in ip_mroute_set/getsockopt
sctp: set sin_port for addr param when checking duplicate address
net/mlx4_en: fix overflow in mlx4_en_init_timestamp()
netfilter: nft_set_bitmap: incorrect bitmap size
net: s2io: fix typo argumnet argument
net: vxge: fix typo argumnet argument
netfilter: nf_ct_expect: Change __nf_ct_expect_check() return value.
ipv4: mask tos for input route
ipv4: add missing initialization for flowi4_uid
lib: fix spelling mistake: "actualy" -> "actually"
...
Joerg Roedel [Tue, 28 Feb 2017 12:57:18 +0000 (13:57 +0100)]
iommu/amd: Fix crash when accessing AMD-Vi sysfs entries
The link between the iommu sysfs-device and the struct
amd_iommu is no longer stored as driver-data. Update the
code to the new correct way of getting from device to
amd_iommu.
Reported-by: Dave Jones <davej@codemonkey.org.uk> Fixes: 39ab9555c241 ('iommu: Add sysfs bindings for struct iommu_device') Signed-off-by: Joerg Roedel <jroedel@suse.de>
Russell King [Mon, 16 Jan 2017 15:21:05 +0000 (15:21 +0000)]
ARM: mm: round the initrd reservation to page boundaries
Round the initrd memblock reservation to page boundaries to prevent
other data sharing the initrd pages. This prevents an allocation
possibly overlapping with the initrd, which would later get trampled
on in free_initrd_mem().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Russell King [Mon, 16 Jan 2017 15:13:25 +0000 (15:13 +0000)]
ARM: mm: clean up initrd initialisation
Rather than repeatedly testing phys_initrd_size to see if the initrd
is still enabled, return from the new function to avoid executing the
remaining initialisation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Arnd Bergmann [Thu, 2 Feb 2017 12:30:40 +0000 (13:30 +0100)]
ARM: 8655/1: improve NOMMU definition of pgprot_*()
The tegra DRM driver produces a harmless warning when built for NOMMU:
drivers/gpu/drm/tegra/gem.c: In function 'tegra_drm_mmap':
drivers/gpu/drm/tegra/gem.c:508:12: unused variable 'prot'
This is because pgprot_writecombine() on ARM returns a constant and
ignores its argument. The version in asm-generic doesn't have that
problem, so let's use that one instead. We don't actually care
about the value on NOMMU, and this is consistent with what some
other architectures do.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Arnd Bergmann [Thu, 2 Feb 2017 12:29:36 +0000 (13:29 +0100)]
ARM: 8654/1: decompressor: add strlen prototype
The decompress.c file contains a declaration for strstr() so we can
include some compression library code.
With the updated LZ4 implementation, we run into the same problem again
for strlen():
In file included from ../include/linux/rcupdate.h:40:0,
from ../include/linux/srcu.h:33,
from ../include/linux/notifier.h:15,
from ../include/linux/memory_hotplug.h:6,
from ../include/linux/mmzone.h:749,
from ../include/linux/gfp.h:5,
from ../include/linux/kmod.h:22,
from ../include/linux/module.h:13,
from ../arch/arm/boot/compressed/../../../../lib/lz4/lz4_decompress.c:39,
from ../arch/arm/boot/compressed/../../../../lib/decompress_unlz4.c:13,
from ../arch/arm/boot/compressed/decompress.c:55:
include/linux/cpumask.h: In function 'cpumask_parse':
include/linux/cpumask.h:592:53: error: implicit declaration of function 'strlen';did you mean 'strstr'? [-Werror=implicit-function-declaration]
This adds another declaration to work around the new problem.
Fixes: ce83d9ab80d6 ("lib: update LZ4 compressor module") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
According to the spec 'ELF for the ARM Architecture' (IHI 0044E),
addends for R_ARM_PREL31 relocations are 31-bit signed quantities,
so we need to sign extend the value to 32 bits before it can be used
as an offset in the calculation of the relocated value.
We have not been bitten by this because these relocations are usually
emitted against the start of a section, which means the addends never
assume negative values in practice. But it is a bug nonetheless, so fix
it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Afzal Mohammed [Wed, 1 Feb 2017 12:47:34 +0000 (13:47 +0100)]
ARM: 8649/2: nommu: remove Hivecs configuration is asm
Now that exception based address is handled dynamically for
processors with CP15, remove Hivecs configuration in assembly.
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Afzal Mohammed [Wed, 1 Feb 2017 12:39:18 +0000 (13:39 +0100)]
ARM: 8648/2: nommu: display vectors base
VECTORS_BASE displays the exception base address. Now on no-MMU as
the exception base address is dynamically estimated, define
VECTORS_BASE to the variable holding it.
As it is the case, limit VECTORS_BASE constant definition to MMU.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Afzal Mohammed [Wed, 1 Feb 2017 12:46:36 +0000 (13:46 +0100)]
ARM: 8647/2: nommu: dynamic exception base address setting
No-MMU dynamic exception base address configuration on CP15
processors. In the case of low vectors, decision based on whether
security extensions are enabled & whether remap vectors to RAM
CONFIG option is selected.
For no-MMU without CP15, current default value of 0x0 is retained.
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Afzal Mohammed [Sun, 29 Jan 2017 16:31:32 +0000 (17:31 +0100)]
ARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig
For MMU configurations, VECTORS_BASE is always 0xffff0000, a macro
definition will suffice.
For no-MMU, exception base address is dynamically determined in
subsequent patches. To preserve bisectability, now make the
macro applicable for no-MMU scenario too.
Thanks to 0-DAY kernel test infrastructure that found the
bisectability issue. This macro will be restricted to MMU case upon
dynamically determining exception base address for no-MMU.
Once exception address is handled dynamically for no-MMU,
VECTORS_BASE can be removed from Kconfig.
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Florian Fainelli [Sun, 15 Jan 2017 02:59:29 +0000 (03:59 +0100)]
ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol
All low-level PM/SMP code using virt_to_phys() should actually use
__pa_symbol() against kernel symbols. Update code where relevant to move
away from virt_to_phys().
Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Florian Fainelli [Sun, 15 Jan 2017 02:59:00 +0000 (03:59 +0100)]
ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL
x86 has an option: CONFIG_DEBUG_VIRTUAL to do additional checks on
virt_to_phys calls. The goal is to catch users who are calling
virt_to_phys on non-linear addresses immediately. This includes caller
using __virt_to_phys() on image addresses instead of __pa_symbol(). This
is a generally useful debug feature to spot bad code (particulary in
drivers).
Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Florian Fainelli [Sun, 15 Jan 2017 02:57:40 +0000 (03:57 +0100)]
ARM: 8639/1: Define KERNEL_START and KERNEL_END
In preparation for adding CONFIG_DEBUG_VIRTUAL support, define a set of
common constants: KERNEL_START and KERNEL_END which abstract
CONFIG_XIP_KERNEL vs. !CONFIG_XIP_KERNEL. Update the code where
relevant.
Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Florian Fainelli [Sun, 15 Jan 2017 02:57:03 +0000 (03:57 +0100)]
ARM: 8638/1: mtd: lart: Rename partition defines to be prefixed with PART_
In preparation for defining KERNEL_START on ARM, rename KERNEL_START to
PART_KERNEL_START, and to be consistent, do this for all
partition-related constants.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Laura Abbott [Fri, 13 Jan 2017 21:51:45 +0000 (22:51 +0100)]
ARM: 8637/1: Adjust memory boundaries after reservations
adjust_lowmem_bounds is responsible for setting up the boundary for
lowmem/highmem. This needs to be setup before memblock reservations can
occur. At the time memblock reservations can occur, memory can also be
removed from the system. The lowmem/highmem boundary and end of memory
may be affected by this but it is currently not recalculated. On some
systems this may be harmless, on others this may result in incorrect
ranges being passed to the main memory allocator. Correct this by
recalculating the lowmem/highmem boundary after all reservations have
been made.
Tested-by: Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Laura Abbott [Fri, 13 Jan 2017 21:51:08 +0000 (22:51 +0100)]
ARM: 8636/1: Cleanup sanity_check_meminfo
The logic for sanity_check_meminfo has become difficult to
follow. Clean up the code so it's more obvious what the code
is actually trying to do. Additionally, meminfo is now removed
so rename the function to better describe its purpose.
Tested-by: Magnus Lilja <lilja.magnus@gmail.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Linus Torvalds [Tue, 28 Feb 2017 07:07:59 +0000 (23:07 -0800)]
Merge tag 'ktest-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
"These are various fixes that I have made and never got around to
pushing. I've been asked to get the upstream repo back up-to-date"
* tag 'ktest-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Add variable run_command_status to save status of commands executed
ktest.pl: Powercycle the box on reboot if no connection can be made
ktest: Add timeout to ssh command
ktest: Fix child exit code processing
ktest: Have POST_TEST run after the test has totally completed
Linus Torvalds [Tue, 28 Feb 2017 07:03:04 +0000 (23:03 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Martin Schwidefsky:
"Next to the usual bug fixes (including the TASK_SIZE fix), there is
one larger crypto item. It allows to use protected keys with the
in-kernel crypto API
The protected key support has two parts, the pkey user space API to
convert key formats and the paes crypto module that uses a protected
key instead of a standard AES key"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: TASK_SIZE for kernel threads
s390/crypt: Add protected key AES module
s390/dasd: fix spelling mistake: "supportet" -> "supported"
s390/pkey: Introduce pkey kernel module
s390/zcrypt: export additional symbols
s390/zcrypt: Rework CONFIG_ZCRYPT Kconfig text.
s390/zcrypt: Cleanup leftover module code.
s390/nmi: purge tlbs after control register validation
s390/nmi: fix order of register validation
s390/crypto: Add PCKMO inline function
s390/zcrypt: Enable request count reset for cards and queues.
s390/mm: use _SEGMENT_ENTRY_EMPTY in the code
s390/chsc: Add exception handler for CHSC instruction
s390: opt into HAVE_COPY_THREAD_TLS
s390: restore address space when returning to user space
s390: rename CIF_ASCE to CIF_ASCE_PRIMARY
Josh Poimboeuf [Tue, 28 Feb 2017 04:21:16 +0000 (22:21 -0600)]
objtool: Enclose contents of unreachable() macro in a block
Guenter Roeck reported a boot failure in mips64. It was bisected to the
following commit:
d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")
The unreachable() macro was formerly only composed of a single
statement. The above commit added a second statement, but neglected to
enclose the statements in a block.
Suggested-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends") Link: http://lkml.kernel.org/r/20170228042116.glmwmwiohcix7o4a@treble Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Tue, 28 Feb 2017 05:41:08 +0000 (21:41 -0800)]
Merge branch 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Several noteworthy changes.
- Parav's rdma controller is finally merged. It is very straight
forward and can limit the abosolute numbers of common rdma
constructs used by different cgroups.
- kernel/cgroup.c got too chubby and disorganized. Created
kernel/cgroup/ subdirectory and moved all cgroup related files
under kernel/ there and reorganized the core code. This hurts for
backporting patches but was long overdue.
- cgroup v2 process listing reimplemented so that it no longer
depends on allocating a buffer large enough to cache the entire
result to sort and uniq the output. v2 has always mangled the sort
order to ensure that users don't depend on the sorted output, so
this shouldn't surprise anybody. This makes the pid listing
functions use the same iterators that are used internally, which
have to have the same iterating capabilities anyway.
- perf cgroup filtering now works automatically on cgroup v2. This
patch was posted a long time ago but somehow fell through the
cracks.
- misc fixes asnd documentation updates"
* 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (27 commits)
kernfs: fix locking around kernfs_ops->release() callback
cgroup: drop the matching uid requirement on migration for cgroup v2
cgroup, perf_event: make perf_event controller work on cgroup2 hierarchy
cgroup: misc cleanups
cgroup: call subsys->*attach() only for subsystems which are actually affected by migration
cgroup: track migration context in cgroup_mgctx
cgroup: cosmetic update to cgroup_taskset_add()
rdmacg: Fixed uninitialized current resource usage
cgroup: Add missing cgroup-v2 PID controller documentation.
rdmacg: Added documentation for rdmacg
IB/core: added support to use rdma cgroup controller
rdmacg: Added rdma cgroup controller
cgroup: fix a comment typo
cgroup: fix RCU related sparse warnings
cgroup: move namespace code to kernel/cgroup/namespace.c
cgroup: rename functions for consistency
cgroup: move v1 mount functions to kernel/cgroup/cgroup-v1.c
cgroup: separate out cgroup1_kf_syscall_ops
cgroup: refactor mount path and clearly distinguish v1 and v2 paths
cgroup: move cgroup v1 specific code to kernel/cgroup/cgroup-v1.c
...
Linus Torvalds [Tue, 28 Feb 2017 05:39:19 +0000 (21:39 -0800)]
Merge branch 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu update from Tejun Heo:
"This contains just one minor cleanup patch which gets rid of an
unnecessary irqsave/restore in the cpu dead callback"
* 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu_counter: percpu_counter_hotcpu_callback() cleanup
Drivers:
- armada38x: fix errata, Armada 7K/8K support
- ds3232: fix wakeup support
- gemini: DT support
- m48t86: huge cleanup and platform_data removal
- mcp795: alarm support
- sun6i: proper oscillator handling
- tegra: proper clock handling
- tps65910: calibration support"
* tag 'rtc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (44 commits)
rtc: ds3232: Call device_init_wakeup before device_register
rtc: pcf2127: bulk read only date and time registers.
rtc: armada38x: Add support for Armada 7K/8K
rtc: armada38x: Prepare driver to manage different versions
rtc: ds3232: Add regmap max_register definition.
rtc: ds3232: Cleanup whitespace around register and bit definitions.
rtc: m48t86: remove unused platform_data
ARM: Orion5x: ts78xx: allow rtc-m48t86 to manage it's own resources
ARM: Orion5x: ts78xx: remove RTC detection
ARM: ep93xx: ts72xx: allow rtc-m48t86 to manage its own resources
rtc: m48t86: verify that the RTC is actually present
rtc: m48t86: add NVRAM support
rtc: m48t86: allow driver to manage its resources
rtc: m48t86: shorten register name defines
bindings: rtc: correct wrong reference in required properties
rtc: sun6i: Fix return value check in sun6i_rtc_clk_init()
rtc: sun6i: extend test coverage
rtc: sun6i: Fix compatibility with old DT binding
rtc: snvs: add a missing write sync
rtc: bq32000: add support to enable disable the trickle charge FET bypass
...
Jinbum Park [Mon, 27 Feb 2017 22:30:22 +0000 (14:30 -0800)]
mm: add arch-independent testcases for RODATA
This patch makes arch-independent testcases for RODATA. Both x86 and
x86_64 already have testcases for RODATA, But they are arch-specific
because using inline assembly directly.
And cacheflush.h is not a suitable location for rodata-test related
things. Since they were in cacheflush.h, If someone change the state of
CONFIG_DEBUG_RODATA_TEST, It cause overhead of kernel build.
To solve the above issues, write arch-independent testcases and move it
to shared location.
[jinb.park7@gmail.com: fix config dependency] Link: http://lkml.kernel.org/r/20170209131625.GA16954@pjb1027-Latitude-E5410 Link: http://lkml.kernel.org/r/20170129105436.GA9303@pjb1027-Latitude-E5410 Signed-off-by: Jinbum Park <jinb.park7@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Mon, 27 Feb 2017 22:30:05 +0000 (14:30 -0800)]
checkpatch: warn when formats use %Z and suggest %z
vsnprintf extension %Z<foo> is non-standard C. Suggest the use of %z
instead.
Miscellanea:
- Correct the misuse of type string PRINTF_0xDECIMAL type strings are
supposed to be uppercase only. Fix this and add tr/[a-z]/[A-Z] to the
type check in case I forget this again sometime in the future.
- Improve the mechanism to find these defects so all 3 current checks
are done on the format string
Alexey Dobriyan [Mon, 27 Feb 2017 22:30:02 +0000 (14:30 -0800)]
lib/vsprintf.c: remove %Z support
Now that %z is standartised in C99 there is no reason to support %Z.
Unlike %L it doesn't even make format strings smaller.
Use BUILD_BUG_ON in a couple ATM drivers.
In case anyone didn't notice lib/vsprintf.o is about half of SLUB which
is in my opinion is quite an achievement. Hopefully this patch inspires
someone else to trim vsprintf.c more.
Masahiro Yamada [Mon, 27 Feb 2017 22:29:34 +0000 (14:29 -0800)]
scripts/spelling.txt: add "applys" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:
applys||applies
The "applyes" in drivers/video/fbdev/aty/radeon_monitor.c is a different
pattern but it was fixed in this commit. The "This functions" in the
same line was fixed as well.
Masahiro Yamada [Mon, 27 Feb 2017 22:29:06 +0000 (14:29 -0800)]
scripts/spelling.txt: add "varible" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:
varible||variable
While we are here, tidy up the comment blocks that fit in a single line
for drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c and
net/sctp/transport.c.
Masahiro Yamada [Mon, 27 Feb 2017 22:29:01 +0000 (14:29 -0800)]
scripts/spelling.txt: add "algined" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:
algined||aligned
While we are here, fix the "appplication" in the touched line in
drivers/block/loop.c. Also, fix the "may not naturally ..." to
"may not be naturally ..." in the touched line in mm/page_alloc.
Masahiro Yamada [Mon, 27 Feb 2017 22:28:58 +0000 (14:28 -0800)]
scripts/spelling.txt: add "aligment" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:
aligment||alignment
I did not touch the "N_BYTE_ALIGMENT" macro in
drivers/net/wireless/realtek/rtlwifi/wifi.h to avoid unpredictable
impact.
I fixed "_aligment_handler" in arch/openrisc/kernel/entry.S because
it is surrounded by #if 0 ... #endif. It is surely safe and I
confirmed "_alignment_handler" is correct.
I also fixed the "controler" I found in the same hunk in
arch/openrisc/kernel/head.S.
Masahiro Yamada [Mon, 27 Feb 2017 22:28:47 +0000 (14:28 -0800)]
scripts/spelling.txt: add "an user" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:
an user||a user
an userspace||a userspace
I also added "userspace" to the list since it is a common word in Linux.
I found some instances for "an userfaultfd", but I did not add it to the
list. I felt it is endless to find words that start with "user" such as
"userland" etc., so must draw a line somewhere.
Gilad Ben-Yossef [Mon, 27 Feb 2017 22:28:29 +0000 (14:28 -0800)]
scatterlist: do not disable IRQs in sg_copy_buffer
Commit 50bed2e2862a ("sg: disable interrupts inside sg_copy_buffer")
introduced disabling interrupts in sg_copy_buffer() since atomic uses of
miter required it due to use of kmap_atomic().
However, as commit 8290e2d2dcbf ("scatterlist: atomic sg_mapping_iter()
no longer needs disabled IRQs") acknowledges disabling interrupts is no
longer needed for calls to kmap_atomic() and therefore unneeded for
miter ops either, so remove it from sg_copy_buffer().
projects / mirror_ubuntu-kernels.git / log