Neill Whillans [Wed, 30 Nov 2016 13:41:05 +0000 (13:41 +0000)]
net: ethernet: altera_tse: add support for SGMII PCS
Add support for the (optional) SGMII PCS functionality of the Altera
TSE MAC. If the phy-mode is set to 'sgmii' then we attempt to discover
and initialise the PCS so that the MAC can communicate to the PHY.
The PCS IP block provides a scratch register for testing presence of
the PCS, which is mapped into one of the two MDIO spaces present in
the MAC's register space. Once we have determined that the scratch
register is functioning, we attempt to initialise the PCS to
auto-negotiate an SGMII link with the PHY. There is no need to monitor
or manage the SGMII link beyond this, since the normal PHY MDIO will
then be used to monitor the media layer.
The Altera TSE MAC has only one way in which it can be configured with an
SGMII PCS, and as such, this patch only looks to the phy-mode to select
whether or not to attempt to initialise the PCS registers. During
initialisation, we report the PCS's equivalent of a PHY ID register.
This can be parameterised during the IP instantiation and is often left
as '0x00000000' which is not an error.
Signed-off-by: Neill Whillans <neill.whillans@codethink.co.uk> Reviewed-by: Daniel Silverstone <daniel.silverstone@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Agate [Wed, 30 Nov 2016 13:41:04 +0000 (13:41 +0000)]
net: phy: vitesse: add support for VSC8572
Add support for the Vitesse VSC8572 which is functionally equivalent to
the already supported VSC8574. As such, all the same handling functions
are used since the VSC8572 merely has half the number of phy blocks
internally.
Signed-off-by: Stephen Agate <stephen.agate@uk.thalesgroup.com> Signed-off-by: Neill Whillans <neill.whillans@codethink.co.uk> Reviewed-by: Daniel Silverstone <daniel.silverstone@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Thu, 1 Dec 2016 17:00:54 +0000 (17:00 +0000)]
sfc: fix debug message format string in efx_farch_handle_rx_not_ok
Defalconisation removed one of the string arguments, but missed the
corresponding %s.
Fixes: 5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 1 Dec 2016 16:26:48 +0000 (11:26 -0500)]
Merge branch 'mdix_ctrl'
Raju Lakkaraju says:
====================
Adding PHY MDI(X) support
I updated all review comments which were given by Andrew and Florian.
This series add support for PHY MDI(X), and implement it for MSCC phys.
Tested on Beaglebone Black with VSC 8531 PHY.
Change set:
v1:
- Initial patch submit the WoL and MDI-X in single set of patches
v2:
- Split the mdi(x) as signal set of patches.
- Remove the out_unlock as suggested by Andrew.
- Add mdix_ctrl parameter in "phy_device" to handle the user configure
mdi(x). Proposed implementation accepted by Florian.
- phydev->mdix_ctrl initialize with ETH_TP_MDI_AUTO. Ethernet controller
never initialize this parameter.
- Fix the mdix changes in marvell and microchip driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Raju Lakkaraju [Tue, 29 Nov 2016 09:46:48 +0000 (15:16 +0530)]
net: phy: Add mdi(x) support in Microsemi PHYs driver
To connect two ports of the same configuration (MDI to MDI or
MDI-X to MDI-X) with a 10/100/1000 Mbit/s connection, an
Ethernet crossover cable is needed to cross over the transmit
and receive signals in the cable, so that they are matched at
the connector level.
When connecting an MDI port to an MDI-X port a straight through
cable is used while to connect two MDI ports or two MDI-X ports
a crossover cable must be used. Conventionally MDI is used on end
devices while MDI-X is used on hubs and switches
Auto MDI-X automatically detects the required cable connection
type and configures the connection appropriately, removing the
need for crossover cables to interconnect switches or connecting
PCs peer-to-peer.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Raju Lakkaraju [Tue, 29 Nov 2016 09:46:46 +0000 (15:16 +0530)]
net: phy: add mdix_ctrl to hold the user configuration.
Add new parameter mdix_ctrl to hold the user configuration.
Existing mdix maintain the current status of MDI(X) crossover performed or
not.
mdix_ctrl can configure either ETH_TP_MDI or ETH_TP_MDI_X orETH_TP_MDI_AUTO.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gao Feng [Wed, 30 Nov 2016 00:48:44 +0000 (08:48 +0800)]
driver: ipvlan: Remove useless member mtu_adj of struct ipvl_dev
The mtu_adj is initialized to zero when alloc mem, there is no any
assignment to mtu_adj. It is only used in ipvlan_adjust_mtu as one
right value.
So it is useless member of struct ipvl_dev, then remove it.
Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Colitti [Tue, 29 Nov 2016 17:56:47 +0000 (02:56 +0900)]
net: ipv4: Don't crash if passing a null sk to ip_rt_update_pmtu.
Commit e2d118a1cb5e ("net: inet: Support UID-based routing in IP
protocols.") made __build_flow_key call sock_net(sk) to determine
the network namespace of the passed-in socket. This crashes if sk
is NULL.
Fix this by getting the network namespace from the skb instead.
Fixes: e2d118a1cb5e ("net: inet: Support UID-based routing in IP protocols.") Reported-by: Erez Shitrit <erezsh@dev.mellanox.co.il> Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Josef Bacik [Tue, 29 Nov 2016 17:35:19 +0000 (12:35 -0500)]
bpf: add test for the verifier equal logic bug
This is a test to verify that
bpf: fix states equal logic for varlen access
actually fixed the problem. The problem was if the register we added to our map
register was UNKNOWN in both the false and true branches and the only thing that
changed was the range then we'd incorrectly assume that the true branch was
valid, which it really wasnt. This tests this case and properly fails without
my fix in place and passes with it in place.
Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 30 Nov 2016 19:37:15 +0000 (14:37 -0500)]
Merge branch 'cpsw-per-channel-shaping'
Ivan Khoronzhuk says:
====================
cpsw: add per channel shaper configuration
This series is intended to allow user to set rate for per channel
shapers at cpdma level. This patchset doesn't have impact on performance.
The rate can be set with:
Ivan Khoronzhuk [Tue, 29 Nov 2016 15:00:50 +0000 (17:00 +0200)]
net: ethernet: ti: cpsw: optimize end of poll cycle
Check budget fullness only after it's updated and update
channel mask only once to keep budget balance between channels.
It's also needed for farther changes.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Tue, 29 Nov 2016 15:00:49 +0000 (17:00 +0200)]
net: ethernet: ti: cpsw: add .ndo to set per-queue rate
This patch allows to rate limit queues tx queues for cpsw interface.
The rate is set in absolute Mb/s units and cannot be more a speed
an interface is connected with.
Ivan Khoronzhuk [Tue, 29 Nov 2016 15:00:48 +0000 (17:00 +0200)]
net: ethernet: ti: davinci_cpdma: add set rate for a channel
The cpdma has 8 rate limited tx channels. This patch adds
ability for cpdma driver to use 8 tx h/w shapers. If at least one
channel is not rate limited then it must have higher number, this
is because the rate limited channels have to have higher priority
then not rate limited channels. The channel priority is set in low-hi
direction already, so that when a new channel is added with ethtool
and it doesn't have rate yet, it cannot affect on rate limited
channels. It can be useful for TSN streams and just in cases when
h/w rate limited channels are needed.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Tue, 29 Nov 2016 15:00:47 +0000 (17:00 +0200)]
net: ethernet: ti: davinci_cpdma: add weight function for channels
The weight of a channel is needed to split descriptors between
channels. The weight can depend on maximum rate of channels, maximum
rate of an interface or other reasons. The channel weight is in
percentage and is independent for rx and tx channels.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 30 Nov 2016 19:32:06 +0000 (14:32 -0500)]
Merge branch 'qed-XDP-support'
Yuval Mintz says:
====================
qed*: Add XDP support
This patch series is intended to add XDP to the qede driver, although
it contains quite a bit of cleanups, refactorings and infrastructure
changes as well.
The content of this series can be roughly divided into:
- Datapath improvements - mostly focused on having the datapath utilize
parameters which can be more tightly contained in cachelines.
Patches #1, #2, #8, #9 belong to this group.
- Refactoring - done mostly in favour of XDP. Patches #3, #4, #5, #9.
- Infrastructure changes - done in favour of XDP. Paches #6 and #7 belong
to this category [#7 being by far the biggest patch in the series].
- Actual XDP support - last two patches [#10, #11].
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:10 +0000 (16:47 +0200)]
qede: Add support for XDP_TX
Add support for forwarding via XDP. Once the eBPF is attached,
driver would allocate & configure a designated transmission queue
meant solely for forwarding packets. Said queue would share the
receive-queue's interrupt line, and would have it's own Tx statistics.
Infrastructure changes required for this [spread-out through the code]:
- Determine the DMA direction of the receive buffers based on the presence
of the eBPF program.
- Turn the sw Tx ring into a union, as regular/XDP queues have different
needs for releasing resources after completion [regular requires the SKB,
XDP requires the transmitted page].
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:08 +0000 (16:47 +0200)]
qede: Better utilize the qede_[rt]x_queue
Improve the cacheline usage of both queues by reordering -
This reduces the cachelines required for egress datapath processing
from 3 to 2 and those required by ingress datapath processing by 2.
It also changes a couple of datapath related functions that currently
require either the fastpath or the qede_dev, changing them to be based
on the tx/rx queue instead.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:06 +0000 (16:47 +0200)]
qed*: Handle-based L2-queues.
The driver needs to maintain several FW/HW-indices for each one of
its queues. Currently, that mapping is done by the QED where it uses
an rx/tx array of so-called hw-cids, populating them whenever a new
queue is opened and clearing them upon destruction of said queues.
This maintenance is far from ideal - there's no real reason why
QED needs to maintain such a data-structure. It becomes even worse
when considering the fact that the PF's queues and its child VFs' queues
are all mapped into the same data-structure.
As a by-product, the set of parameters an interface needs to supply for
queue APIs is non-trivial, and some of the variables in the API
structures have different meaning depending on their exact place
in the configuration flow.
This patch re-organizes the way L2 queues are configured and maintained.
In short:
- Required parameters for queue init are now well-defined.
- Qed would allocate a queue-cid based on parameters.
Upon initialization success, it would return a handle to caller.
- Queue-handle would be maintained by entity requesting queue-init,
not necessarily qed.
- All further queue-APIs [update, destroy] would use the opaque
handle as reference for the queue instead of various indices.
The possible owners of such handles:
- PF queues [qede] - complete handles based on provided configuration.
- VF queues [qede] - fw-context-less handles, containing only relative
information; Only the PF-side would need the absolute indices
for configuration, so they're omitted here.
- VF queues [qed, PF-side] - complete handles based on VF initialization.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:05 +0000 (16:47 +0200)]
qede: Revise state locking scheme
As qede utilizes an internal-reload sequence as result of various
configuration changes, the netif state wouldn't always accurately describe
the status of the configuration.
To compensate, we're storing an internal state of the device, which should
only be accessed under the qede_lock.
This patch fixes and improves several state/lock interactions:
- The internal state should only be checked while locked.
- While holding lock, it's preferable to check state rather than
the netdevice's state.
- The reload sequence is not 'atomic' - unload and subsequent load
are not in the same critical section.
This also add the 'locked' variant for the reload, which would later be
used by XDP - useful in the case where the correct sequence is 'lock,
check state and re-configure if good', instead of allowing the reload
itself to make the decision regarding the configurability of the device.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:04 +0000 (16:47 +0200)]
qede: Refactor data-path Rx flow
Driver's NAPI poll is using a long sequence for processing ingress
packets, and it's going to get even longer once we do XDP.
Break down the main loop into a series of sub-functions to allow
better readability of the function.
While we're at it, correct the accounting of the NAPI budget -
currently we're counting only packets passed to the stack against
the budget, even in case those are actually aggregations.
After refactoring every CQE processed would be counted against the budget.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:02 +0000 (16:47 +0200)]
qede: Remove 'num_tc'.
Driver currently doesn't support multi-CoS, but it contains logic
where multiple transmission queues could be theoretically manipulated.
No point in maintaining the infrastructure at the moment.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:01 +0000 (16:47 +0200)]
qed: Optimize qed_chain datapath usage
The chain structure and functions are widely used by the qed* modules,
both for configuration and datapath.
E.g., qede's Tx has one such chain and its Rx has two.
Currently, the strucutre's fields which are required for datapath
related functions [produce/consume] are intertwined with fields which
are required only for configuration purposes [init/destroy/etc.].
This patch re-arranges the chain structure so that all the fields which
are required for datapath usage could reside in a single cacheline instead
of the two which are required today.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:00 +0000 (16:47 +0200)]
qede: Optimize aggregation information size
Driver needs to maintain a structure per-each concurrent possible
open aggregation, but the structure storing that metadata is far from
being optimized - biggest waste in it is that there are 2 buffer metadata,
one for a replacement buffer when the aggregation begins and the other for
holding the first aggregation's buffer after it begins [as firmware might
still update it]. Those 2 can safely be united into a single metadata
structure.
struct qede_agg_info changes the following:
/* size: 120, cachelines: 2, members: 9 */
/* sum members: 114, holes: 1, sum holes: 4 */
/* padding: 2 */
/* paddings: 2, sum paddings: 8 */
/* last cacheline: 56 bytes */
-->
/* size: 48, cachelines: 1, members: 9 */
/* paddings: 1, sum paddings: 4 */
/* last cacheline: 48 bytes */
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Tue, 29 Nov 2016 13:35:07 +0000 (14:35 +0100)]
ehea: Remove unnecessary memset of stats in netdev private data
The memory for netdev private data is allocated using kzalloc/vzalloc in
alloc_netdev_mqs, thus there is no need to zero the stats portion of it
again in the driver's probe function.
In any case, the size for the memset is wrong as the stats member is of
type rtnl_link_stats64, not net_device_stats.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
this #include is unnecessary and brings whole set of
other headers into cgroup-defs.h. Remove it.
Fixes: 3007098494be ("cgroup: add support for eBPF programs") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Rami Rosen <roszenrami@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Mack <daniel@zonque.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Zhang Shengju [Wed, 30 Nov 2016 03:24:42 +0000 (11:24 +0800)]
neigh: remove duplicate check for same neigh
Currently loop index 'idx' is used as the index in the neigh list of interest.
It's increased only when the neigh is dumped. It's not the absolute index in
the list. Because there is no info to record which neigh has already be scanned
by previous loop. This will cause the filtered out neighs to be scanned mulitple
times.
This patch make idx as the absolute index in the list, it will increase no matter
whether the neigh is filtered. This will prevent the above problem.
And this is in line with other dump functions.
v2:
- take David Ahern's advice to do simple change
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following build error:
HOSTCC samples/bpf/test_lru_dist.o
../samples/bpf/test_lru_dist.c:25:22: fatal error: bpf_util.h: No such file or directory
This is due to objtree != srctree.
Use srctree, since that's where bpf_util.h is located.
Fixes: e00c7b216f34 ("bpf: fix multiple issues in selftest suite and samples") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Zhang Shengju [Tue, 29 Nov 2016 03:26:32 +0000 (11:26 +0800)]
macvtap: replace printk with netdev_err
This patch replaces printk() with netdev_err() for macvtap device.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 30 Nov 2016 16:03:10 +0000 (11:03 -0500)]
Merge branch 'liquidio-VF'
Raghu Vatsavayi says:
====================
liquidio VF operations
This patchseries adds support for VF device specific operations
like mailbox, queues and register access. This V3 patchset also
has changes based on comments form earlier versions:
1) Removed extra 'void *' casting.
2) Fixed all cross compilations issues reported on S390 and Powerpc
architectures.
Please apply the patches in following order as these patches depend
on each other.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sargun Dhillon [Mon, 28 Nov 2016 22:52:42 +0000 (14:52 -0800)]
samples: bpf: Refactor test_cgrp2_attach -- use getopt, and add mode
This patch modifies test_cgrp2_attach to use getopt so we can use standard
command line parsing.
It also adds an option to run the program in detach only mode. This does
not attach a new filter at the cgroup, but only runs the detach command.
Lastly, it changes the attach code to not detach and then attach. It relies
on the 'hotswap' behaviour of CGroup BPF programs to be able to change
in-place. If detach-then-attach behaviour needs to be tested, the example
can be run in detach only mode prior to attachment.
Signed-off-by: Sargun Dhillon <sargun@sargun.me> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 28 Nov 2016 22:16:54 +0000 (23:16 +0100)]
bpf, xdp: allow to pass flags to dev_change_xdp_fd
Add an IFLA_XDP_FLAGS attribute that can be passed for setting up
XDP along with IFLA_XDP_FD, which eventually allows user space to
implement typical add/replace/delete logic for programs. Right now,
calling into dev_change_xdp_fd() will always replace previous programs.
When passed XDP_FLAGS_UPDATE_IF_NOEXIST, we can handle this more
graceful when requested by returning -EBUSY in case we try to
attach a new program, but we find that another one is already
attached. This will be used by upcoming front-end for iproute2 as
well.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 29 Nov 2016 17:57:18 +0000 (09:57 -0800)]
net: phy: bcm7xxx: Plug in support for reading PHY error counters
Broadcom BCM7xxx internal PHYs can leverage the Broadcom PHY library
module PHY error counters helper functions, just implement the
appropriate PHY driver function calls to do so. We need to allocate some
storage space for our PHY statistics, and provide it to the Broadcom PHY
library, so do this in a specific probe function, and slightly wrap the
get_stats function call.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 29 Nov 2016 17:57:17 +0000 (09:57 -0800)]
net: phy: broadcom: Add support code for reading PHY counters
Broadcom PHYs expose a number of PHY error counters: receive errors,
false carrier sense, SerDes BER count, local and remote receive errors.
Add support code to allow retrieving these error counters. Since the
Broadcom PHY library code is used by several drivers, make it possible
for them to specify the storage for the software copy of the statistics.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Mon, 28 Nov 2016 18:55:34 +0000 (18:55 +0000)]
sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver
Rationale: The differences between Falcon and Siena are in many ways larger
than those between Siena and EF10 (despite Siena being nominally "Falcon-
architecture"); for instance, Falcon has no MCPU, so there is no MCDI.
Removing Falcon support from the sfc driver should simplify the latter,
and avoid the possibility of Falcon support being broken by changes to sfc
(which are rarely if ever tested on Falcon, it being end-of-lifed hardware).
The sfc-falcon driver created in this changeset is essentially a copy of the
sfc driver, but with Siena- and EF10-specific code, including MCDI, removed
and with the "efx_" identifier prefix changed to "ef4_" (for "EFX 4000-
series") to avoid collisions when both drivers are built-in.
This changeset removes Falcon from the sfc driver's PCI ID table; then in
sfc I've removed obvious Falcon-related code: I removed the Falcon NIC
functions, Falcon PHY code, and EFX_REV_FALCON_*, then fixed up everything
that referenced them.
Also, increment minor version of both drivers (to 4.1).
For now, CONFIG_SFC selects CONFIG_SFC_FALCON, so that updating old configs
doesn't cause Falcon support to disappear; but that should be undone at
some point in the future.
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch set provides instrumentation on TCP sender limitations.
While developing the BBR congestion control, we noticed that TCP
sending process is often limited by factors unrelated to congestion
control: insufficient sender buffer and/or insufficient receive
window/buffer to saturate the network bandwidth. Unfortunately these
limits are not visible to the users and often the poor performance
is attributed to the congestion control of choice.
Thie patch aims to help users get the high level understanding of
where sending process is limited by, similar to the TCP_INFO design.
It is not to replace detailed kernel tracing and instrumentation
facilities.
In addition this patch set provide a new option to the timestamping
work to instrument these limits on application data unit. For exampe,
one can use SO_TIMESTAMPING and this patch set to measure the how
long a particular HTTP response is limited by small receive window.
Patch set was initially written by Francis Yan then polished
by Yuchung Cheng, with lots of help from Eric Dumazet and Soheil
Hassas Yeganeh.
====================
Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Francis Yan [Mon, 28 Nov 2016 07:07:18 +0000 (23:07 -0800)]
tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING
This patch exports the sender chronograph stats via the socket
SO_TIMESTAMPING channel. Currently we can instrument how long a
particular application unit of data was queued in TCP by tracking
SOF_TIMESTAMPING_TX_SOFTWARE and SOF_TIMESTAMPING_TX_SCHED. Having
these sender chronograph stats exported simultaneously along with
these timestamps allow further breaking down the various sender
limitation. For example, a video server can tell if a particular
chunk of video on a connection takes a long time to deliver because
TCP was experiencing small receive window. It is not possible to
tell before this patch without packet traces.
To prepare these stats, the user needs to set
SOF_TIMESTAMPING_OPT_STATS and SOF_TIMESTAMPING_OPT_TSONLY flags
while requesting other SOF_TIMESTAMPING TX timestamps. When the
timestamps are available in the error queue, the stats are returned
in a separate control message of type SCM_TIMESTAMPING_OPT_STATS,
in a list of TLVs (struct nlattr) of types: TCP_NLA_BUSY_TIME,
TCP_NLA_RWND_LIMITED, TCP_NLA_SNDBUF_LIMITED. Unit is microsecond.
Signed-off-by: Francis Yan <francisyyan@gmail.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Francis Yan [Mon, 28 Nov 2016 07:07:17 +0000 (23:07 -0800)]
tcp: export sender limits chronographs to TCP_INFO
This patch exports all the sender chronograph measurements collected
in the previous patches to TCP_INFO interface. Note that busy time
exported includes all the other sending limits (rwnd-limited,
sndbuf-limited). Internally the time unit is jiffy but externally
the measurements are in microseconds for future extensions.
Signed-off-by: Francis Yan <francisyyan@gmail.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Francis Yan [Mon, 28 Nov 2016 07:07:16 +0000 (23:07 -0800)]
tcp: instrument how long TCP is limited by insufficient send buffer
This patch measures the amount of time when TCP runs out of new data
to send to the network due to insufficient send buffer, while TCP
is still busy delivering (i.e. write queue is not empty). The goal
is to indicate either the send buffer autotuning or user SO_SNDBUF
setting has resulted network under-utilization.
The measurement starts conservatively by checking various conditions
to minimize false claims (i.e. under-estimation is more likely).
The measurement stops when the SOCK_NOSPACE flag is cleared. But it
does not account the time elapsed till the next application write.
Also the measurement only starts if the sender is still busy sending
data, s.t. the limit accounted is part of the total busy time.
Signed-off-by: Francis Yan <francisyyan@gmail.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Francis Yan [Mon, 28 Nov 2016 07:07:15 +0000 (23:07 -0800)]
tcp: instrument how long TCP is limited by receive window
This patch measures the total time when the TCP stops sending because
the receiver's advertised window is not large enough. Note that
once the limit is lifted we are likely in the busy status if we
have data pending.
Signed-off-by: Francis Yan <francisyyan@gmail.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Francis Yan [Mon, 28 Nov 2016 07:07:14 +0000 (23:07 -0800)]
tcp: instrument how long TCP is busy sending
This patch measures TCP busy time, which is defined as the period
of time when sender has data (or FIN) to send. The time starts when
data is buffered and stops when the write queue is flushed by ACKs
or error events.
Note the busy time does not include SYN time, unless data is
included in SYN (i.e. Fast Open). It does include FIN time even
if the FIN carries no payload. Excluding pure FIN is possible but
would incur one additional test in the fast path, which may not
be worth it.
Signed-off-by: Francis Yan <francisyyan@gmail.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Francis Yan [Mon, 28 Nov 2016 07:07:13 +0000 (23:07 -0800)]
tcp: instrument tcp sender limits chronographs
This patch implements the skeleton of the TCP chronograph
instrumentation on sender side limits:
1) idle (unspec)
2) busy sending data other than 3-4 below
3) rwnd-limited
4) sndbuf-limited
The limits are enumerated 'tcp_chrono'. Since a connection in
theory can idle forever, we do not track the actual length of this
uninteresting idle period. For the rest we track how long the sender
spends in each limit. At any point during the life time of a
connection, the sender must be in one of the four states.
If there are multiple conditions worthy of tracking in a chronograph
then the highest priority enum takes precedence over
the other conditions. So that if something "more interesting"
starts happening, stop the previous chrono and start a new one.
The time unit is jiffy(u32) in order to save space in tcp_sock.
This implies application must sample the stats no longer than every
49 days of 1ms jiffy.
Signed-off-by: Francis Yan <francisyyan@gmail.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yegor Yefremov [Mon, 28 Nov 2016 08:41:33 +0000 (09:41 +0100)]
cpsw: ethtool: add support for getting/setting EEE registers
Add the ability to query and set Energy Efficient Ethernet parameters
via ethtool for applicable devices.
This patch doesn't activate full EEE support in cpsw driver, but it
enables reading and writing EEE advertising settings. This way one
can disable advertising EEE for certain speeds.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Acked-by: Rami Rosen <roszenrami@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vitaly Kuznetsov [Mon, 28 Nov 2016 17:25:44 +0000 (18:25 +0100)]
hv_netvsc: remove excessive logging on MTU change
When we change MTU or the number of channels on a netvsc device we get the
following logged:
hv_netvsc bf5edba8...: net device safe to remove
hv_netvsc: hv_netvsc channel opened successfully
hv_netvsc bf5edba8...: Send section size: 6144, Section count:2560
hv_netvsc bf5edba8...: Device MAC 00:15:5d:1e:91:12 link state up
This information is useful as debug at most.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 28 Nov 2016 17:01:25 +0000 (18:01 +0100)]
mlxsw: core: Add missing rollback in error path
Without this rollback, the thermal zone is still registered during the
error path, whereas its private data is freed upon the destruction of
the underlying bus device due to the use of devm_kzalloc(). This results
in use after free.
Fix this by calling mlxsw_thermal_fini() from the appropriate place in
the error path.
Fixes: a50c1e35650b ("mlxsw: core: Implement thermal zone") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 28 Nov 2016 17:01:24 +0000 (18:01 +0100)]
mlxsw: spectrum_buffers: Limit size of pools
The shared buffer pools are containers whose size is used to calculate
the maximum usage for packets from / to a specific port / {port, PG/TC},
when dynamic threshold is employed.
While it's perfectly fine for the sum of the pools to exceed the maximum
size of the shared buffer, a single pool cannot.
Add a check when the pool size is set and forbid sizes larger than the
maximum size of the shared buffer.
Without the patch:
$ devlink sb pool set pci/0000:03:00.0 pool 0 size 999999999 thtype
dynamic
// No error is returned
With the patch:
$ devlink sb pool set pci/0000:03:00.0 pool 0 size 999999999 thtype
dynamic
devlink answers: Invalid argument
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Mon, 28 Nov 2016 14:26:04 +0000 (15:26 +0100)]
mlxsw: switchib: add MLXSW_PCI dependency
The newly added switchib driver fails to link if MLXSW_PCI=m:
drivers/net/ethernet/mellanox/mlxsw/mlxsw_switchib.o: In function^Cmlxsw_sib_module_exit':
switchib.c:(.exit.text+0x8): undefined reference to `mlxsw_pci_driver_unregister'
switchib.c:(.exit.text+0x10): undefined reference to `mlxsw_pci_driver_unregister'
drivers/net/ethernet/mellanox/mlxsw/mlxsw_switchib.o: In function `mlxsw_sib_module_init':
switchib.c:(.init.text+0x28): undefined reference to `mlxsw_pci_driver_register'
switchib.c:(.init.text+0x38): undefined reference to `mlxsw_pci_driver_register'
switchib.c:(.init.text+0x48): undefined reference to `mlxsw_pci_driver_unregister'
The other two such sub-drivers have a dependency, so add the same one
here. In theory we could allow this driver if MLXSW_PCI is disabled,
but it's probably not worth it.
Fixes: d1ba52638456 ("mlxsw: switchib: Introduce SwitchIB and SwitchIB silicon driver") Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
If device_release_driver(&phydev->mdio.dev) is called, it releases all
resources belonging to the PHY device. Hence the subsequent call to
phy_led_triggers_unregister() will access already freed memory when
unregistering the LEDs.
Move the call to phy_led_triggers_unregister() before the possible call
to device_release_driver() to fix this.
Fixes: 2e0bc452f4721520 ("net: phy: leds: add support for led triggers on phy link state change") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Mack [Mon, 28 Nov 2016 13:11:04 +0000 (14:11 +0100)]
bpf: cgroup: fix documentation of __cgroup_bpf_update()
There's a 'not' missing in one paragraph. Add it.
Fixes: 3007098494be ("cgroup: add support for eBPF programs") Signed-off-by: Daniel Mack <daniel@zonque.org> Reported-by: Rami Rosen <roszenrami@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 30 Nov 2016 00:38:31 +0000 (19:38 -0500)]
Merge branch 'eee-broken-modes'
Jerome Brunet says:
====================
Fix OdroidC2 Gigabit Tx link issue
This patchset fixes an issue with the OdroidC2 board (DWMAC + RTL8211F).
The platform seems to enter LPI on the Rx path too often while performing
relatively high TX transfer. This eventually break the link (both Tx and
Rx), and require to bring the interface down and up again to get the Rx
path working again.
The root cause of this issue is not fully understood yet but disabling EEE
advertisement on the PHY prevent this feature to be negotiated.
With this change, the link is stable and reliable, with the expected
throughput performance.
The patchset adds options in the generic phy driver to disable EEE
advertisement, through device tree. The way it is done is very similar
to the handling of the max-speed property.
Changes since V2: [2]
- Rename "eee-advert-disable" to "eee-broken-modes" to make the intended
purpose of this option clear (flag broken configuration, not a
configuration option)
- Add DT bindings constants so the DT configuration is more user friendly
- Submit to net-next instead of net.
Changes since V1: [1]
- Disable the advertisement of EEE in the generic code instead of the
realtek driver.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
jbrunet [Mon, 28 Nov 2016 09:46:47 +0000 (10:46 +0100)]
dt-bindings: net: add EEE capability constants
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
jbrunet [Mon, 28 Nov 2016 09:46:46 +0000 (10:46 +0100)]
net: phy: add an option to disable EEE advertisement
This patch adds an option to disable EEE advertisement in the generic PHY
by providing a mask of prohibited modes corresponding to the value found in
the MDIO_AN_EEE_ADV register.
On some platforms, PHY Low power idle seems to be causing issues, even
breaking the link some cases. The patch provides a convenient way for these
platforms to disable EEE advertisement and work around the issue.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Niklas Cassel [Thu, 24 Nov 2016 14:36:33 +0000 (15:36 +0100)]
net: stmmac: enable tx queue 0 for gmac4 IPs synthesized with multiple TX queues
The dwmac4 IP can synthesized with 1-8 number of tx queues.
On an IP synthesized with DWC_EQOS_NUM_TXQ > 1, all txqueues are disabled
by default. For these IPs, the bitfield TXQEN is R/W.
Always enable tx queue 0. The write will have no effect on IPs synthesized
with DWC_EQOS_NUM_TXQ == 1.
The driver does still not utilize more than one tx queue in the IP.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Färber [Sun, 27 Nov 2016 22:59:51 +0000 (23:59 +0100)]
MAINTAINERS: Add device tree bindings to mv88e6xx section
Also include the netdev list for convenience, as done elsewhere.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Haishuang Yan [Mon, 28 Nov 2016 05:26:58 +0000 (13:26 +0800)]
geneve: fix ip_hdr_len reserved for geneve6 tunnel.
It shold reserved sizeof(ipv6hdr) for geneve in ipv6 tunnel.
Fixes: c3ef5aa5e5 ('geneve: Merge ipv4 and ipv6 geneve_build_skb()') Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch series addresses discussions and feedback that was recently received
on the mailing-list in the area of: flow control/pause frames, interpretation of
phy_interface_t and finally add some links to useful standards documents.
Changes in v3:
- add Timur's feedback into patch 3
Changes in v2:
- clarify a few things in the RGMII section, add a paragraph about common issues
with RGMII delay mismatches
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 28 Nov 2016 02:45:15 +0000 (18:45 -0800)]
Documentation: net: phy: Add links to several standards documents
Add links to the IEEE 802.3-2008 document, and the RGMII v1.3 and v2.0
revisions of the standard.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 28 Nov 2016 02:45:14 +0000 (18:45 -0800)]
Documentation: net: phy: Add blurb about RGMII
RGMII is a recurring source of pain for people with Gigabit Ethernet
hardware since it may require PHY driver and MAC driver level
configuration hints. Document what are the expectations from PHYLIB and
what options exist.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 28 Nov 2016 02:45:13 +0000 (18:45 -0800)]
Documentation: net: phy: Add a paragraph about pause frames/flow control
Describe that the Ethernet MAC controller is ultimately responsible for
dealing with proper pause frames/flow control advertisement and
enabling, and that it is therefore allowed to have it change
phydev->supported/advertising with SUPPORTED_Pause and
SUPPORTED_AsymPause.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 28 Nov 2016 02:45:12 +0000 (18:45 -0800)]
Documentation: net: phy: remove description of function pointers
Remove the function pointers documentation which duplicates information
found in include/linux/phy.h. Maintaining documentation about two
different locations just does not work, but the code is less likely to
be outdated.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
mv88e6xxx_g1_irq_setup() sets up chip->g1_irq.nirqs interrupt mappings,
so free the same amount. This will be 8 or 9 in practice, less than 16.
Fixes: dc30c35be720 ("net: dsa: mv88e6xxx: Implement interrupt support.") Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 28 Nov 2016 20:09:37 +0000 (15:09 -0500)]
Merge branch 'mlx5-DCBX-and-ethtool-updates'
Saeed Mahameed says:
====================
Mellanox 100G mlx5 DCBX and ethtool updates
This series provides the following mlx5 updates:
From Huy:
DCBX CEE API and DCBX firmware/host modes support.
- 1st patch ensures the dcbnl_rtnl_ops is published only when the qos
capability bits is on.
- 2nd patch adds the support for CEE interfaces into mlx5 dcbnl_rtnl_ops
- 3rd patch refactors ETS query to read ETS configuration directly from
firmware rather than having a software shadow to it. The existing IEEE
interfaces stays the same.
- 4th patch adds the support for MLX5_REG_DCBX_PARAM and MLX5_REG_DCBX_APP
firmware commands to manipulate mlx5 DCBX mode.
- 5th patch adds the driver support for the new DCBX firmware. This ensures
the backward compatibility versus the old and new firmware. With the new DCBX
firmware, qos settings can be controlled by either firmware or software
depending on the DCBX mode.
From Kamal and Saeed:
- mlx5 self-test support.
From Shaker:
- Private flag to give the user the ability to enable/disable mlx5 CQE
compression.
V1->V2:
- Check ETS capability where needed in:
("net/mlx5e: Read ETS settings directly from firmware")
- Fix return value of mlx5e_dcbnl_switch_to_host_mode in:
("net/mlx5e: ConnectX-4 firmware support for DCBX")
- Update commit message of:
("net/mlx5e: ConnectX-4 firmware support for DCBX")
- Fix two sparse static check warnings in en_selftest.c
This series was generated against commit: e5f12b3f5ebb ("Merge branch 'mlxsw-trap-groups-and-policers'")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Shaker Daibes [Sun, 27 Nov 2016 15:02:12 +0000 (17:02 +0200)]
net/mlx5e: Add CQE compression user control
The user can now override the automatic driver decision using the
rx_cqe_compress flag, which is the preference for CQE compression.
The flag is initialized with the automatic driver decision.
Signed-off-by: Shaker Daibes <shakerd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shaker Daibes [Sun, 27 Nov 2016 15:02:11 +0000 (17:02 +0200)]
net/mlx5e: Moves pflags to priv->params
pflags is a configuration parameter for the netdev, naturally it belongs
to priv->params.
Also introduce MLX5E_GET_PFLAG
Signed-off-by: Shaker Daibes <shakerd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed [Sun, 27 Nov 2016 15:02:10 +0000 (17:02 +0200)]
net/mlx5e: Add support for loopback selftest
Extend the self diagnostic tests to support loopback test.
The loopback test doesn't require the offline flag, it will use the
generic dev_queue_xmit and a dedicated packet_type to capture and verify
mlx5e selftest loopback packets.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kamal Heib [Sun, 27 Nov 2016 15:02:09 +0000 (17:02 +0200)]
net/mlx5e: Add support for ethtool self diagnostics test
The self diagnostics test implementaion include the following features:
1. Link Test: Check that link is in up state.
2. Speed Test: Check that link was negotiated correctly.
3. Health Test: Check the device health.
Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huy Nguyen [Sun, 27 Nov 2016 15:02:07 +0000 (17:02 +0200)]
net/mlx5e: ConnectX-4 firmware support for DCBX
DBCX by default is controlled by firmware where dcbx capability bit
is set. In this mode, firmware is responsible for reading/sending the
TLV packets from/to the remote partner.
This patch sets up the infrastructure to move between HOST/FW DCBX
control mode.
Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / mirror_ubuntu-jammy-kernel.git / log