]> git.proxmox.com Git - mirror_ubuntu-kernels.git/log
mirror_ubuntu-kernels.git
14 years agomicroblaze: Remove the buggy ALLOW_EDIT_AUTO config option
John Williams [Mon, 24 Aug 2009 03:52:32 +0000 (13:52 +1000)]
microblaze: Remove the buggy ALLOW_EDIT_AUTO config option

This was intended to allow manual override of CPU settings copied automatically
to Kconfig.auto, however it's problematic for several reasons, but mostly:

  * If the defconfig doesn't have ALLOW_EDIT_AUTO=y, then it's impossible for
    that defconfig to iverride the values in the kernel source tree.  This leads
    to very strange errors where the kernel is compiled with the wrong CPUFLAGS.

Next patch in the series will back out the default in Kconfig.auto to baseline
settings, so a kernel built with no default values will at least boot on any
hardware, just not make use of additional CPU features.

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Move cache macro from cache.h to cacheflush.h
Michal Simek [Thu, 15 Oct 2009 13:18:13 +0000 (15:18 +0200)]
microblaze: Move cache macro from cache.h to cacheflush.h

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: support U-BOOT image format
Michal Simek [Wed, 14 Oct 2009 15:38:26 +0000 (17:38 +0200)]
microblaze: support U-BOOT image format

Two version are generated.
linux.bin.ub which is created from linux.bin file
and
simpleImage.<dts>.ub which is created from stripped simpleImage.<dts> file

Load address and entry point is for microblaze first instruction
which is CONFIG_KERNEL_BASE_ADDR variable.

There is possible for simpleImage format parse _start symbol too.

simpleImage.<dts> is still stripped elf file

I cleared simpleImage.<dts>.unstrip file because there are so big.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Ptrace notifying from signal code
Michal Simek [Thu, 15 Oct 2009 09:32:25 +0000 (11:32 +0200)]
microblaze: Ptrace notifying from signal code

After the signal frame is set up on the userspace stack, ptrace() should
be given an opportunity to single-step into the signal handler

FRV, Blackfin, mn10300 and UM. Worth to look at that patches.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Extend cpuinfo for support write-back caches
Michal Simek [Wed, 14 Oct 2009 09:12:50 +0000 (11:12 +0200)]
microblaze: Extend cpuinfo for support write-back caches

There is missing checking agains PVR but this is not important
for now. There are some missing checking too.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Fix cache_line_lenght
Michal Simek [Thu, 8 Oct 2009 11:06:42 +0000 (13:06 +0200)]
microblaze: Fix cache_line_lenght

We used cache_line as cache_line_lenght. For this reason
we did cache flushing 4 times longer than was necessary.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Detect new 7.20.d version
Michal Simek [Thu, 15 Oct 2009 11:34:31 +0000 (13:34 +0200)]
microblaze: Detect new 7.20.d version

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Support both levels for reset
Michal Simek [Thu, 29 Oct 2009 09:12:59 +0000 (10:12 +0100)]
microblaze: Support both levels for reset

Till this patch reset always perform writen to 1.
Now we can use negative logic and perform reset write to 0.

It is opposite level than is currently read from that pin

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Fix announce message for reset gpio
Michal Simek [Thu, 29 Oct 2009 07:58:15 +0000 (08:58 +0100)]
microblaze: Fix announce message for reset gpio

I had to change message for gpio-reset because I always
not to see it. Prefix RESET is big and visible.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Remove saving and restoring before calling signal code
Michal Simek [Fri, 13 Nov 2009 07:26:49 +0000 (08:26 +0100)]
microblaze: Remove saving and restoring before calling signal code

Saving is done in SAVE_STATE macros that's why another save discard
previous saved value.

This change has no effect to normal programs because they ends in any exception
and they are killed. On the other side has effect on debugging.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Fix pfn_valid() for noMMU
steve@digidescorp.com [Fri, 13 Nov 2009 22:08:29 +0000 (16:08 -0600)]
microblaze: Fix pfn_valid() for noMMU

Configuring DEBUG_SLAB causes a noMMU kernel to die during initialization
with an invalid virtual address panic in kfree_debugcheck().
The panic is due to an improper definition of pfn_valid().

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: ftrace: Add dynamic function graph tracer
Michal Simek [Mon, 16 Nov 2009 09:34:15 +0000 (10:34 +0100)]
microblaze: ftrace: Add dynamic function graph tracer

This patch add support for dynamic function graph tracer.

There is one my expactation that I can do flush_icache after
all code modification. On microblaze is this safer than do
flush for every entry. For icache is used name flush but
correct should be invalidation - this will be fix in upcomming
new cache implementaion and WB support.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: ftrace: add function graph support
Michal Simek [Mon, 16 Nov 2009 09:32:10 +0000 (10:32 +0100)]
microblaze: ftrace: add function graph support

For more information look at Documentation/trace folder.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: ftrace: Add dynamic trace support
Michal Simek [Thu, 10 Dec 2009 13:15:44 +0000 (14:15 +0100)]
microblaze: ftrace: Add dynamic trace support

With dynamic function tracer, by default, _mcount is defined as an
"empty" function, it returns directly without any more action. When
enabling it in user-space, it will jump to a real tracing
function(ftrace_caller), and do the real job for us.

Differ from the static function tracer, dynamic function tracer provides
two functions ftrace_make_call()/ftrace_make_nop() to enable/disable the
tracing of some indicated kernel functions(set_ftrace_filter).

In the kernel version, there is only one "_mcount" string for every
kernel function, so, we just need to match this one in mcount_regex of
scripts/recordmcount.pl.

For more information please look at code and Documentation/trace folder.

Steven ACK that scripts/recordmcount.pl part.

Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: ftrace: enable HAVE_FUNCTION_TRACE_MCOUNT_TEST
Michal Simek [Mon, 16 Nov 2009 08:55:08 +0000 (09:55 +0100)]
microblaze: ftrace: enable HAVE_FUNCTION_TRACE_MCOUNT_TEST

Implement MCOUNT_TEST in asm code - it is faster than use
generic code

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: ftrace: add static function tracer
Michal Simek [Mon, 16 Nov 2009 08:40:14 +0000 (09:40 +0100)]
microblaze: ftrace: add static function tracer

If -pg of gcc is enabled with CONFIG_FUNCTION_TRACER=y. a calling to
_mcount will be inserted into each kernel function. so, there is a
possibility to trace the kernel functions in _mcount.

This patch add the specific _mcount support for static function
tracing. by default, ftrace_trace_function is initialized as
ftrace_stub(an empty function), so, the default _mcount will introduce
very little overhead. after enabling ftrace in user-space, it will jump
to a real tracing function and do static function tracing for us.

Commit message from Wu Zhangjin <wuzhangjin@gmail.com>

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Add TRACE_IRQFLAGS_SUPPORT
Michal Simek [Fri, 30 Oct 2009 11:26:53 +0000 (12:26 +0100)]
microblaze: Add TRACE_IRQFLAGS_SUPPORT

There are just two major changes
Renamed local_irq functions to raw_local_irq in irq.c.
Added TRACE_IRQFLAGS_SUPPORT to Kconfig.debug.

Look at Documentation/irqflags-tracing.txt

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: preliminary enabling for LATENCYTOP support in Kconfig
Michal Simek [Mon, 16 Nov 2009 08:09:47 +0000 (09:09 +0100)]
microblaze: preliminary enabling for LATENCYTOP support in Kconfig

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Lockdep support
Michal Simek [Thu, 10 Dec 2009 11:07:02 +0000 (12:07 +0100)]
microblaze: Lockdep support

Microblaze needs to do lock_init very soon because MMU init calls lock functions.

Here is the explanation from Peter Zijlstra why we have to enable
__ARCH_WANTS_INTERRUPTS_ON_CTSW.

"So we schedule while holding rq->lock (for obvious reasons), but since
lockdep tracks held locks per tasks, we need to transfer the held state
from the prev to the next task. We do this by explicity calling
spin_release(&rq->lock) in context_switch() right before switch_to(),
and calling spin_acquire(&rq->lock) in
finish_task_switch()->finish_lock_switch().

Now, for some reason lockdep thinks that interrupts got enabled over the
context switch (git grep __ARCH_WANTS_INTERRUPTS_ON_CTSW arch/microblaze
doesn't seem to turn up anything).

Clearly trying to acquire the rq->lock with interrupts enabled is a bad
idea and lockdep warns you about this."

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Register timecounter/cyclecounter
Michal Simek [Fri, 6 Nov 2009 11:31:00 +0000 (12:31 +0100)]
microblaze: Register timecounter/cyclecounter

It is the same counter as we use as free running one.
I would like to use it for ftrace.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Stack trace support
Michal Simek [Tue, 10 Nov 2009 14:57:01 +0000 (15:57 +0100)]
microblaze: Stack trace support

This is working implemetation but the problem is that
Microblaze misses frame pointer that's why is there
big loop which trace and show all addresses which are in text.
It shows addresses which are in registers, etc.

This is problem and this is the reason why all Microblaze
traces are wrong. There is an option to do hacks and trace
the kernel code but this is too complicated.

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: Add IRQENTRY_TEXT to lds
Michal Simek [Fri, 6 Nov 2009 11:27:25 +0000 (12:27 +0100)]
microblaze: Add IRQENTRY_TEXT to lds

It is important for ftrace irqsoff support

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: __init_begin symbol must be aligned
Michal Simek [Fri, 30 Oct 2009 13:41:52 +0000 (14:41 +0100)]
microblaze: __init_begin symbol must be aligned

The problem was that free_initmem pass to  free_initrd_mem got
bad aligned __init_begin symbol and free_initrd_mem don't care
about __init_end but take PAGE_SIZE instead.

Here is behavior in kernel bootlog.
ramdisk_execute_command from (init/main.c) was rewrite

Freeing unused kernel memory: 6224k freed
Failed to execute ��������������{���
Failed to execute ��������������{����.  Attempting defaults...
Mounting proc:
Mounting var:

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agomicroblaze: GPIO reset support
Michal Simek [Fri, 2 Oct 2009 10:48:47 +0000 (12:48 +0200)]
microblaze: GPIO reset support

Signed-off-by: Michal Simek <monstr@monstr.eu>
14 years agoMerge branch 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6
Linus Torvalds [Sat, 12 Dec 2009 23:22:22 +0000 (15:22 -0800)]
Merge branch 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6

* 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6:
  IXP4xx: GTWX5715 platform only has two PCI IRQ lines, not four.
  IXP4xx: Introduce IXP4XX_GPIO_IRQ(n) macro and convert IXP4xx platform files.
  IXP4xx: move Gemtek GTWX5715 platform macros to the platform code.
  IXP4xx: Remove unused Motorola PrPMC1100 platform macros.
  IXP4xx: move FSG platform macros to the platform code.
  IXP4xx: move DSM G600 platform macros to the platform code.
  IXP4xx: move NAS100D platform macros to the platform code.
  IXP4xx: move NSLU2 platform macros to the platform code.
  IXP4xx: move Coyote platform macros to the platform code.
  IXP4xx: move AVILA platform macros to the platform code.
  IXP4xx: move IXDP425 platform macros to the platform code.
  IXP4xx: Extend PCI MMIO indirect address space to 1 GB.
  IXP4xx: Fix compilation failure with CONFIG_IXP4XX_INDIRECT_PCI.
  IXP4xx: Drop "__ixp4xx_" prefix from in/out/ioread/iowrite functions for clarity.
  IXP4xx: Rename indirect MMIO primitives from __ixp4xx_* to __indirect_*.
  IXP4xx: Ensure index is positive in irq_to_gpio() and npe_request().
  ARM: fix insl() and outsl() endianness on IXP4xx architecture.
  IXP4xx: Fix normally-disabled debugging text in drivers/net/arm/ixp4xx_eth.c.
  IXP4xx: change the timer base frequency to 66.666000 MHz.

14 years ago[BKL] add 'might_sleep()' to the outermost lock taker
Linus Torvalds [Sat, 12 Dec 2009 22:46:33 +0000 (14:46 -0800)]
[BKL] add 'might_sleep()' to the outermost lock taker

As shown by the previous patch (6698e3472: "tty: Fix BKL taken under a
spinlock bug introduced in the BKL split") the BKL removal is prone to
some subtle issues, where removing the BKL in one place may in fact make
a previously nested BKL call the new outer call, and then prone to nasty
deadlocks with other spinlocks.

In general, we should never take the BKL while we're holding a spinlock,
so let's just add a "might_sleep()" to it (even though the BKL doesn't
technically sleep - at least not yet), and we'll get nice warnings the
next time this kind of problem happens during BKL removal.

Acked-and-Tested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agotty: Fix BKL taken under a spinlock bug introduced in the BKL split
Alan Cox [Sat, 12 Dec 2009 10:32:36 +0000 (10:32 +0000)]
tty: Fix BKL taken under a spinlock bug introduced in the BKL split

The fasync path takes the BKL (it probably doesn't need to in fact)
while holding the file_list spinlock.  You can't do that with the kernel
lock: it causes lock inversions and deadlocks.

Leave the BKL over that bit for the moment.

Identified by AKPM.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-and-Tested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMerge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Sat, 12 Dec 2009 22:27:24 +0000 (14:27 -0800)]
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (151 commits)
  powerpc: Fix usage of 64-bit instruction in 32-bit altivec code
  MAINTAINERS: Add PowerPC patterns
  powerpc/pseries: Track previous CPPR values to correctly EOI interrupts
  powerpc/pseries: Correct pseries/dlpar.c build break without CONFIG_SMP
  powerpc: Make "intspec" pointers in irq_host->xlate() const
  powerpc/8xx: DTLB Miss cleanup
  powerpc/8xx: Remove DIRTY pte handling in DTLB Error.
  powerpc/8xx: Start using dcbX instructions in various copy routines
  powerpc/8xx: Restore _PAGE_WRITETHRU
  powerpc/8xx: Add missing Guarded setting in DTLB Error.
  powerpc/8xx: Fixup DAR from buggy dcbX instructions.
  powerpc/8xx: Tag DAR with 0x00f0 to catch buggy instructions.
  powerpc/8xx: Update TLB asm so it behaves as linux mm expects.
  powerpc/8xx: Invalidate non present TLBs
  powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallocate
  pseries/pseries: Add code to online/offline CPUs of a DLPAR node
  powerpc: stop_this_cpu: remove the cpu from the online map.
  powerpc/pseries: Add kernel based CPU DLPAR handling
  sysfs/cpu: Add probe/release files
  powerpc/pseries: Kernel DLPAR Infrastructure
  ...

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sat, 12 Dec 2009 19:40:50 +0000 (11:40 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Overwrite pin config on intel DG45ID board.
  intelhdmi - dont power off HDA link
  ALSA: hrtimer - Fix lock-up
  ALSA: intelhdmi - add channel mapping for typical configurations
  ALSA: intelhdmi - channel mapping applies to Pin
  ALSA: intelhdmi - accept DisplayPort pin
  ALSA: hda - show HBR(High Bit Rate) pin cap in procfs
  ALSA: hda - Fix LED GPIO setup for HP laptops with IDT codecs
  ASoC: Fix build of OMAP sound drivers
  ALSA: opti93x: fix irq releasing if the irq cannot be allocated

14 years agoMerge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind...
Linus Torvalds [Sat, 12 Dec 2009 19:40:13 +0000 (11:40 -0800)]
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (75 commits)
  omap3: Fix OMAP35XX_REV macros
  omap: serial: fix non-empty uart fifo read abort
  omap3: Zoom2/3: Update hsmmc board config params
  omap3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards
  omap3: id code detection 3525 vs 3515
  omap3: rx51: Use wl1251 in SPI mode 3
  omap3: zoom2/3: make MMC slot work again
  omap1: htcherald: Update defconfig to include mux support
  omap1: LCD_DMA: Use some define rather than a hexadecimal
  omap: header: remove unused data-type
  omap: arch/arm/plat-omap/devices.c - sort alphabetically
  omap: Correcting GPMC_CONFIG1_DEVICETYPE_NAND
  OMAP3: serial - allow platforms specify which UARTs to initialize
  omap3: cm-t35: add mux initialization
  OMAP4: Sync up omap4430 defconfig
  OMAP4: Remove the secondary wait loop
  OMAP4: AuxCoreBoot registers only accessible in secure mode
  OMAP4: Fix SRAM base and size
  OMAP4: Fix cpu detection
  omap3: pandora: board file updates for .33
  ...

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sat, 12 Dec 2009 19:39:09 +0000 (11:39 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  be2net: fix error in rx completion processing.
  igbvf: avoid reset storms due to mailbox issues
  igb: fix handling of mailbox collisions between PF/VF
  usb: remove rare pm primitive for conversion to new API

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg...
Linus Torvalds [Sat, 12 Dec 2009 19:37:39 +0000 (11:37 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slab, kmemleak: pass the correct pointer to kmemleak_erase()
  slab, kmemleak: stop calling kmemleak_erase() unconditionally
  SLAB: Fix unlikely() annotation in __cache_alloc_node()
  SLAB: Fix lockdep annotations for CPU hotplug
  SLUB: Fix __GFP_ZERO unlikely() annotation
  slub: allow stats to be cleared

14 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 12 Dec 2009 19:34:10 +0000 (11:34 -0800)]
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (21 commits)
  sched: Remove forced2_migrations stats
  sched: Fix memory leak in two error corner cases
  sched: Fix build warning in get_update_sysctl_factor()
  sched: Update normalized values on user updates via proc
  sched: Make tunable scaling style configurable
  sched: Fix missing sched tunable recalculation on cpu add/remove
  sched: Fix task priority bug
  sched: cgroup: Implement different treatment for idle shares
  sched: Remove unnecessary RCU exclusion
  sched: Discard some old bits
  sched: Clean up check_preempt_wakeup()
  sched: Move update_curr() in check_preempt_wakeup() to avoid redundant call
  sched: Sanitize fork() handling
  sched: Clean up ttwu() rq locking
  sched: Remove rq->clock coupling from set_task_cpu()
  sched: Consolidate select_task_rq() callers
  sched: Remove sysctl.sched_features
  sched: Protect sched_rr_get_param() access to task->sched_class
  sched: Protect task->cpus_allowed access in sched_getaffinity()
  sched: Fix balance vs hotplug race
  ...

Fixed up conflicts in kernel/sysctl.c (due to sysctl cleanup)

14 years agoMerge branch 'topic/hda' into for-linus
Takashi Iwai [Sat, 12 Dec 2009 17:18:08 +0000 (18:18 +0100)]
Merge branch 'topic/hda' into for-linus

14 years agoMerge branch 'topic/asoc' into for-linus
Takashi Iwai [Sat, 12 Dec 2009 17:18:04 +0000 (18:18 +0100)]
Merge branch 'topic/asoc' into for-linus

14 years agoALSA: hda - Overwrite pin config on intel DG45ID board.
Alexey Fisher [Sat, 12 Dec 2009 09:16:41 +0000 (11:16 +0200)]
ALSA: hda - Overwrite pin config on intel DG45ID board.

The pin config provided by BIOS have some problems:
0x0221401f: [Jack] HP Out at Ext Front  <-- other association and sequence
0x02a19020: [Jack] Mic at Ext Front     <-- other association
0x01113014: [Jack] Speaker at Ext Rear  <-- line out (not speaker)
0x01114010: [Jack] Speaker at Ext Rear  <-- line out
0x01a19030: [Jack] Mic at Ext Rear      <-- other association
0x01111012: [Jack] Speaker at Ext Rear  <-- line out
0x01116011: [Jack] Speaker at Ext Rear  <-- line out
0x40f000f0: [N/A] Other at Ext N/A
0x40f000f0: [N/A] Other at Ext N/A
0x40f000f0: [N/A] Other at Ext N/A
0x40f000f0: [N/A] Other at Ext N/A
0x40f000f0: [N/A] Other at Ext N/A
0x01451140: [Jack] SPDIF Out at Ext Rear
0x40f000f0: [N/A] Other at Ext N/A

just overwrite it.

Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
14 years agoMerge branches 'slab/fixes', 'slab/kmemleak', 'slub/perf' and 'slub/stats' into for...
Pekka Enberg [Sat, 12 Dec 2009 08:12:19 +0000 (10:12 +0200)]
Merge branches 'slab/fixes', 'slab/kmemleak', 'slub/perf' and 'slub/stats' into for-linus

14 years agobe2net: fix error in rx completion processing.
Ajit Khaparde [Sat, 12 Dec 2009 06:59:09 +0000 (22:59 -0800)]
be2net: fix error in rx completion processing.

There are certain skews of the NIC which have multiple bits set in
adapter->cap.  Use & instead of == to process rx completions.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoigbvf: avoid reset storms due to mailbox issues
Alexander Duyck [Sat, 12 Dec 2009 06:58:14 +0000 (22:58 -0800)]
igbvf: avoid reset storms due to mailbox issues

From: Alexander Duyck <alexander.h.duyck@intel.com>

This change makes it so that reset/interrupt storms can be avoided when
there are mailbox issues.  The new behavior is to only allow the device to
trigger mailbox related resets only once every 10 seconds.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoigb: fix handling of mailbox collisions between PF/VF
Alexander Duyck [Sat, 12 Dec 2009 06:57:34 +0000 (22:57 -0800)]
igb: fix handling of mailbox collisions between PF/VF

This patch changes the handling of collisions between the use of the
PF/VF sides of the mailbox.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agousb: remove rare pm primitive for conversion to new API
Oliver Neukum [Sat, 12 Dec 2009 05:43:00 +0000 (21:43 -0800)]
usb: remove rare pm primitive for conversion to new API

This patch removes a rare use of the USB power management API which
won't be supported after the conversion to the new generic runtime power
management framework. Functionality is not altered.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sat, 12 Dec 2009 04:58:20 +0000 (20:58 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (75 commits)
  net: Handle NETREG_UNINITIALIZED devices correctly
  can: add the driver for Analog Devices Blackfin on-chip CAN controllers
  xfrm: Fix truncation length of authentication algorithms installed via PF_KEY
  net: use compat helper functions in compat_sys_recvmmsg
  net: fix compat_sys_recvmmsg parameter type
  cxgb3: Fixing EEH handlers
  cnic: Zero out status block and Event Queue indices.
  cnic: Send delete command when shutting down iSCSI ring.
  net: smc91x: Fix up type mismatch in smc_drv_resume().
  smc91x: fix unused flags warnings on UP systems
  MAINTAINERS: Transfering maintainership of cdc-ether
  net: Add missing TST_CFG_WRITE bits around sky2_pci_write
  net: Fix Yukon-2 Optima TCP offload setup
  net: niu uses crc32, so select CRC32
  wireless: update old static regulatory domain rules
  mac80211: Revert 'Use correct sign for mesh active path refresh'
  mac80211: Fixed bug in mesh portal paths
  net/mac80211: Correct size given to memset
  b43: Remove reset after fatal DMA error
  rtl8187: add radio led and fix warnings on suspend
  ...

14 years agoMerge branch 'compat-ioctl-merge' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 12 Dec 2009 04:57:46 +0000 (20:57 -0800)]
Merge branch 'compat-ioctl-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground

* 'compat-ioctl-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
  usbdevfs: move compat_ioctl handling to devio.c
  lp: move compat_ioctl handling into lp.c
  compat_ioctl: pass compat pointer directly to handlers
  compat_ioctl: simplify lookup table
  compat_ioctl: simplify calling of handlers
  compat_ioctl: inline all conversion handlers
  compat_ioctl: Remove BKL
  compat_ioctl: remove all VT ioctl handling

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Linus Torvalds [Sat, 12 Dec 2009 04:57:31 +0000 (20:57 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

* git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: add sys_recvmmsg to unistd.h
  asm-generic: add sys_accept4 to unistd.h
  asm-generic/gpio.h: add some forward decls of the device struct
  asm-generic: Fix typo in asm-generic/unistd.h.
  lib/checksum: fix one more thinko
  lib/checksum.c: make do_csum optional
  lib/checksum.c: use 32-bit arithmetic consistently

14 years agoMerge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 12 Dec 2009 04:49:09 +0000 (20:49 -0800)]
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  itimer: Fix the itimer trace print format
  hrtimer: move timer stats helper functions to hrtimer.c
  hrtimer: Tune hrtimer_interrupt hang logic

14 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 12 Dec 2009 04:48:21 +0000 (20:48 -0800)]
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  lockdep: Avoid out of bounds array reference in save_trace()
  futex: Take mmap_sem for get_user_pages in fault_in_user_writeable
  lockstat: Add usage info to Documentation/lockstat.txt
  lockstat: Fix min, max times in /proc/lock_stats

14 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 12 Dec 2009 04:47:59 +0000 (20:47 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/amd-iommu: Fix PCI hotplug with passthrough mode
  x86/amd-iommu: Fix passthrough mode
  x86: mmio-mod.c: Use pr_fmt
  x86: kmmio.c: Add and use pr_fmt(fmt)
  x86: i8254.c: Add pr_fmt(fmt)
  x86: setup_percpu.c: Use pr_<level> and add pr_fmt(fmt)
  x86: es7000_32.c: Use pr_<level> and add pr_fmt(fmt)
  x86: Print DMI_BOARD_NAME as well as DMI_PRODUCT_NAME from __show_regs()
  x86: Factor duplicated code out of __show_regs() into show_regs_common()
  arch/x86/kernel/microcode*: Use pr_fmt() and remove duplicated KERN_ERR prefix
  x86, mce: fix confusion between bank attributes and mce attributes
  x86/mce: Set up timer unconditionally
  x86: Fix bogus warning in apic_noop.apic_write()
  x86: Fix typo in arch/x86/mm/kmmio.c
  x86: ASUS P4S800 reboot=bios quirk

14 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 12 Dec 2009 04:47:44 +0000 (20:47 -0800)]
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Remove comparing of NULL to va_list in trace_array_vprintk()
  tracing: Fix function graph trace_pipe to properly display failed entries
  tracing: Add full state to trace_seq
  tracing: Buffer the output of seq_file in case of filled buffer
  tracing: Only call pipe_close if pipe_close is defined
  tracing: Add pipe_close interface

14 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 12 Dec 2009 04:47:30 +0000 (20:47 -0800)]
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (57 commits)
  x86, perf events: Check if we have APIC enabled
  perf_event: Fix variable initialization in other codepaths
  perf kmem: Fix unused argument build warning
  perf symbols: perf_header__read_build_ids() offset'n'size should be u64
  perf symbols: dsos__read_build_ids() should read both user and kernel buildids
  perf tools: Align long options which have no short forms
  perf kmem: Show usage if no option is specified
  sched: Mark sched_clock() as notrace
  perf sched: Add max delay time snapshot
  perf tools: Correct size given to memset
  perf_event: Fix perf_swevent_hrtimer() variable initialization
  perf sched: Fix for getting task's execution time
  tracing/kprobes: Fix field creation's bad error handling
  perf_event: Cleanup for cpu_clock_perf_event_update()
  perf_event: Allocate children's perf_event_ctxp at the right time
  perf_event: Clean up __perf_event_init_context()
  hw-breakpoints: Modify breakpoints without unregistering them
  perf probe: Update perf-probe document
  perf probe: Support --del option
  trace-kprobe: Support delete probe syntax
  ...

14 years agoMerge branch 'for-linus' of git://codeaurora.org/quic/kernel/dwalker/linux-msm
Linus Torvalds [Sat, 12 Dec 2009 04:46:51 +0000 (20:46 -0800)]
Merge branch 'for-linus' of git://codeaurora.org/quic/kernel/dwalker/linux-msm

* 'for-linus' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
  HTC Dream: mmc compilation fixes
  video: Allow selecting MSM framebuffer in Kconfig
  Add arm msm maintainer entry
  msm: Add memory map for HTC Dream
  msm: add minimal board file for HTC Dream device
  msm: make debugging UART (for DEBUG_LL) configurable

14 years agoMerge branch 'master' of /home/davem/src/GIT/linux-2.6/
David S. Miller [Sat, 12 Dec 2009 01:12:17 +0000 (17:12 -0800)]
Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
include/net/tcp.h

14 years agoMerge branch 'for-next' into omap-for-linus
Tony Lindgren [Sat, 12 Dec 2009 00:19:16 +0000 (16:19 -0800)]
Merge branch 'for-next' into omap-for-linus

14 years agoomap3: Fix OMAP35XX_REV macros
Sanjeev Premi [Sat, 12 Dec 2009 00:16:37 +0000 (16:16 -0800)]
omap3: Fix OMAP35XX_REV macros

In original implementation, the revision passed to
these macros contained revision number in lower nibble.

But, later the revision bits (OMAP_REVBITS_XX) were
defined to use omap_revision[15:08] where revision
number is containied in higher nibble.

This patch updates the macros; else incorrect revision
is detected for OMAP35xx devices.

Signed-off-by: Sanjeev Premi <premi@ti.com>
14 years agoomap: serial: fix non-empty uart fifo read abort
vikram pandita [Sat, 12 Dec 2009 00:16:37 +0000 (16:16 -0800)]
omap: serial: fix non-empty uart fifo read abort

OMAP3xxx and OMAP4430 UART IP blocks have a restriction wrt RX FIFO.
Empty RX fifo read causes an abort.

OMAP3xxx:
UART IP revision >= 0x52 have this issue
MVR register format is:
Bits  Field Name  Description   Type  Reset
31:8   RESERVED  RO   0x0
7:4    MAJOR   Major revision number of the module.   RO   0x--
3:0    MINOR   Minor revision number of the module.   RO   0x--

OMAP4xxx:
All revisions have this issue
Revision id check is not used as the format of MVR resigster has changed
For omap4 MVR register reads as: 0x50410602 => Revision id = 0x0602
Format of MVR register on omap4 is: (Courtesy: Cousson, Benoit)
Bits  Field Name  Description   Type  Reset
31:30 SCHEME   Scheme revision number of module   RO   0x1
29:28 RESERVED    RO   0x1
27:16 FUNC   Function revision number of module   RO   0x041
15:11 RTL   Rtl revision number of module   RO   0x00
10:8  MAJOR  Major revision number of the module.   RO   0x6
7:6   CUSTOM   Custom revision number of the module.   RO   0x0
5:0   MINOR   Minor revision number of the module.   RO   0x02

Override the default 8250 read handler: mem_serial_in()
by a custom handler: serial_in_8250()
which makes sure that RX fifo is not read when empty

tested on zoom3(3630) board

Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap3: Zoom2/3: Update hsmmc board config params
Madhusudhan Chikkature [Sat, 12 Dec 2009 00:16:37 +0000 (16:16 -0800)]
omap3: Zoom2/3: Update hsmmc board config params

Update the hsmmc zoom peripheral configuration to support:
Power saving mode
mmc2 8-bit support
Configure mmc2 as non removable

Signed-off-by: Madhusudhan Chikkature <madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards
manjugk manjugk [Sat, 12 Dec 2009 00:16:37 +0000 (16:16 -0800)]
omap3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards

The TWL4030 keypad driver is not enabled by default for zoom2 and zoom3
boards.

This patch will enable the same for both zoom2 and zoom3 boards.

Tested on zoom2(3430) and zoom3(3630) boards.

Signed-off-by: Manjunatha GK <manjugk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap3: id code detection 3525 vs 3515
Sergey Lapin [Sat, 12 Dec 2009 00:16:37 +0000 (16:16 -0800)]
omap3: id code detection 3525 vs 3515

The runtime detection of OMAP3515 and OMAP3525
was reversed.

Signed-off-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap3: rx51: Use wl1251 in SPI mode 3
Kalle Valo [Sat, 12 Dec 2009 00:16:37 +0000 (16:16 -0800)]
omap3: rx51: Use wl1251 in SPI mode 3

Otherwise Extreme Lower Power (ELP) wakeup doesn't work properly.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap3: zoom2/3: make MMC slot work again
Anand Gadiyar [Sat, 12 Dec 2009 00:16:36 +0000 (16:16 -0800)]
omap3: zoom2/3: make MMC slot work again

omap3: zoom2/3: make MMC slot work again

Commit 12f8dfb56 accidentally broke MMC on zoom2/3.
The .vmmc1 field of zoom_twldata was deleted. Restoring it
allows the MMC slot to work again

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap1: htcherald: Update defconfig to include mux support
Cory Maccarrone [Sat, 12 Dec 2009 00:16:36 +0000 (16:16 -0800)]
omap1: htcherald: Update defconfig to include mux support

The existing htcherald_defconfig did not include mux support, which
prevented USB and other functionality from working out of the box.
This change updates the defconfig to add it in.  It also aligns the
defconfig to the -rc8 kernel config.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap1: LCD_DMA: Use some define rather than a hexadecimal
Janusz Krzysztofik [Sat, 12 Dec 2009 00:16:36 +0000 (16:16 -0800)]
omap1: LCD_DMA: Use some define rather than a hexadecimal

The patch corrects the issue introduced with one of my earlier patches:
OMAP: DMA: Fix omapfb/lcdc on OMAP1510 broken when PM set[1]
as pointed out by OMAP subsystem maintainer.

Applies on top of my prevoius patch:
  OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1[2]

Tested on Amstrad Delta
Compile tested with omap_generic_2420_defconfig

[1] http://patchwork.kernel.org/patch/57922/
[2] http://patchwork.kernel.org/patch/61952/

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap: header: remove unused data-type
vikram pandita [Sat, 12 Dec 2009 00:16:36 +0000 (16:16 -0800)]
omap: header: remove unused data-type

Remove unused data type omap_gpio_switch_config

Thereby also get rid of following sparse warnings:
arch/arm/plat-omap/include/plat/board.h :121:20:
warning: dubious bitfield without explicit `signed' or `unsigned'
arch/arm/plat-omap/include/plat/board.h :122:19:
warning: dubious bitfield without explicit `signed' or `unsigned'
arch/arm/plat-omap/include/plat/board.h :123:24:
warning: dubious bitfield without explicit `signed' or `unsigned'

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap: arch/arm/plat-omap/devices.c - sort alphabetically
Ladislav Michl [Sat, 12 Dec 2009 00:16:36 +0000 (16:16 -0800)]
omap: arch/arm/plat-omap/devices.c - sort alphabetically

Comment in omap_init_devices asks to keep init calls and their
implementations in alphabetical order, so let it be that way.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap: Correcting GPMC_CONFIG1_DEVICETYPE_NAND
Vimal Singh [Sat, 12 Dec 2009 00:16:35 +0000 (16:16 -0800)]
omap: Correcting GPMC_CONFIG1_DEVICETYPE_NAND

For NAND devices '2' should be used with GPMC_CONFIG1_DEVICETYPE
instead of '1'.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoOMAP3: serial - allow platforms specify which UARTs to initialize
Mika Westerberg [Sat, 12 Dec 2009 00:16:35 +0000 (16:16 -0800)]
OMAP3: serial - allow platforms specify which UARTs to initialize

This patch adds new function: omap_serial_init_port(port) that can be
used to initialize only selected UARTs as serial ports. Platforms can
then in their board files call this function instead of omap_serial_init()
if they don't want to use all UARTs as serial ports.

Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap3: cm-t35: add mux initialization
Mike Rapoport [Sat, 12 Dec 2009 00:16:35 +0000 (16:16 -0800)]
omap3: cm-t35: add mux initialization

CM-T35 can be assembled with different set of peripherals thus making
certain interfaces available to user as GPIOs or dedicated pins. Because
of it CM-T35 bootloader sets up mux configuration only for pins
necessary to boot the system and the rest of the mux configuration is
done by the kernel. Besides, having mux configuration in the kernel
allows to minimize dependancy on bootloader.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoOMAP4: Sync up omap4430 defconfig
Santosh Shilimkar [Sat, 12 Dec 2009 00:16:35 +0000 (16:16 -0800)]
OMAP4: Sync up omap4430 defconfig

Enable minimum features to boot omap4430 on es1.0 samples. v2 versions
removes the "CONFIG_SYSFS_DEPRECATED_V2" since it's deprecated. Without
this older file system doesn't boot. One need to upgrade the filesystem
if getting stuck in first init function.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoOMAP4: Remove the secondary wait loop
Santosh Shilimkar [Sat, 12 Dec 2009 00:16:35 +0000 (16:16 -0800)]
OMAP4: Remove the secondary wait loop

The secondary cores wakes up in time so the wait loop is not
necessary anymore.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoOMAP4: AuxCoreBoot registers only accessible in secure mode
Santosh Shilimkar [Sat, 12 Dec 2009 00:16:35 +0000 (16:16 -0800)]
OMAP4: AuxCoreBoot registers only accessible in secure mode

The AuxCoreBoot0 and AuxCoreBoot1 can be only accessed in secure
mode. Replace the current code with secure monitor API's to access/modify
these registers.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoOMAP4: Fix SRAM base and size
Santosh Shilimkar [Sat, 12 Dec 2009 00:16:35 +0000 (16:16 -0800)]
OMAP4: Fix SRAM base and size

This patch fixes the public sram base address and available
size on OMAP4430.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoOMAP4: Fix cpu detection
Santosh Shilimkar [Sat, 12 Dec 2009 00:16:34 +0000 (16:16 -0800)]
OMAP4: Fix cpu detection

This patch fixes the OMAP4430 cpu detection. The IC rev detection is
done with hawkeye and rev. Note that rev does not map directly to
defined processor revision numbers as ES1.0 uses value 0.It also fixes
the SCM base address to read the correct ID_CODE register.

Also the cpu_is_omap44xx() and cpu_is_omap443x() correctly populated
instead of always being true

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap3: pandora: board file updates for .33
Grazvydas Ignotas [Sat, 12 Dec 2009 00:16:34 +0000 (16:16 -0800)]
omap3: pandora: board file updates for .33

Pandora board file updates:
- change keycodes of game buttons
  it was decided not to use ABXY layout by the developers.
- drop i2c bus 3 speed to 100kHz
  this is needed for battery monitoring chip to work reliably.
- drop pandora_lcd platform_device
  the older DSS driver was never functional on l-o or mainline
  kernels due to missing panel driver, so remove unneeded
  pandora_lcd platform_device. This also removes last OMAP_TAG
  from the board file.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap3: Defconfig file of Always Innovating OMAP3-based Touch Book
Gregoire Gentil [Sat, 12 Dec 2009 00:16:34 +0000 (16:16 -0800)]
omap3: Defconfig file of Always Innovating OMAP3-based Touch Book

Defconfig file of Always Innovating OMAP3-based Touch Book

Signed-off-by: Gregoire Gentil <gregoire@gentil.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap3: Board file of Always Innovating OMAP3-based Touch Book
Gregoire Gentil [Sat, 12 Dec 2009 00:16:34 +0000 (16:16 -0800)]
omap3: Board file of Always Innovating OMAP3-based Touch Book

Board file of Always Innovating OMAP3-based Touch Book

Signed-off-by: Gregoire Gentil <gregoire@gentil.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap1: I2C mux and clocks for omap7xx
Cory Maccarrone [Sat, 12 Dec 2009 00:16:34 +0000 (16:16 -0800)]
omap1: I2C mux and clocks for omap7xx

This change adds MUX pin configuration and clocks for I2C support
to OMAP 730 and 850-based devices.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap1: Add omap7xx USB support
Cory Maccarrone [Sat, 12 Dec 2009 00:16:34 +0000 (16:16 -0800)]
omap1: Add omap7xx USB support

This change implements USB client side support into the HTC
Herald board configuration.  It uses a similar, but updated
algorithm to initialize the USB as is used in the linwizard
project.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap1: DMA: move LCD related code from plat-omap to mach-omap1
Janusz Krzysztofik [Sat, 12 Dec 2009 00:16:33 +0000 (16:16 -0800)]
omap1: DMA: move LCD related code from plat-omap to mach-omap1

All of the LCD DMA code in plat-omap/dma.c appears to be OMAP1-only (and
apparently only is available on a subset of OMAP1 chips).

Move this code to mach-omap1/lcd_dma.c.

Tested on OMAP1510 Amstrad Delta.
Compile-tested with omap_generic_2420_defconfig.

Reported-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap1: Use gen_nand
Ladislav Michl [Sat, 12 Dec 2009 00:16:33 +0000 (16:16 -0800)]
omap1: Use gen_nand

Since omapnand driver never find its way into mainline, switch to gen_nand instead.
Following patch is compile tested only, but it is based on code I wrote for
NetStar board and runtime tested it there.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Cc: Imre Deak <imre.deak@nokia.com>
Cc: Brian Swetland <swetland@google.com>
Cc: Kevin Hilman <kjh@hilman.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agosmc91x: remove OMAP specific bits
Ladislav Michl [Sat, 12 Dec 2009 00:16:33 +0000 (16:16 -0800)]
smc91x: remove OMAP specific bits

Now that all OMAP boards are using the board resources, we don't need
to keep the arch/board specific crap in the driver header.

Cc: linux-net@vger.kernel.org
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap: use smc91x_platdata to setup smc91x
Ladislav Michl [Sat, 12 Dec 2009 00:16:33 +0000 (16:16 -0800)]
omap: use smc91x_platdata to setup smc91x

Use smc91x_platdata to setup smc91x, so we can get rid of OMAP specific stuff
in smc91x driver

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap: mux: Add 36xx CBP package support
Tony Lindgren [Sat, 12 Dec 2009 00:16:33 +0000 (16:16 -0800)]
omap: mux: Add 36xx CBP package support

Add 36xx CBP package support

Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap: mux: Remove old mux code for 34xx
Tony Lindgren [Sat, 12 Dec 2009 00:16:33 +0000 (16:16 -0800)]
omap: mux: Remove old mux code for 34xx

Remove old mux code for 34xx

Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap: mux: Replace omap_cfg_reg() with new style signal or gpio functions
Tony Lindgren [Sat, 12 Dec 2009 00:16:32 +0000 (16:16 -0800)]
omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions

Replace omap_cfg_reg() with new style signal or gpio functions

Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap: Split i2c platform init for mach-omap1 and mach-omap2
Tony Lindgren [Sat, 12 Dec 2009 00:16:32 +0000 (16:16 -0800)]
omap: Split i2c platform init for mach-omap1 and mach-omap2

Otherwise we cannot limit new mux code to mach-omap2.
The same signal names should eventually work for other
omaps under mach-omap2.

Note that these pins don't need to be OMAP_PIN_INPUT_PULLUP,
just OMAP_PIN_INPUT is enough.

Cc: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap: mux: Add debugfs support for new mux code
Tony Lindgren [Sat, 12 Dec 2009 00:16:32 +0000 (16:16 -0800)]
omap: mux: Add debugfs support for new mux code

Add debugfs support for new mux code

Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap: mux: Add new style init functions to omap3 board-*.c files
Tony Lindgren [Sat, 12 Dec 2009 00:16:32 +0000 (16:16 -0800)]
omap: mux: Add new style init functions to omap3 board-*.c files

Add new style mux init functions to omap3 board-*.c files

So far Beagle has been confirmed to be a CBB package,
and CM-T35 a CUS package.

Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap: mux: Add new style pin multiplexing data for 34xx
Tony Lindgren [Sat, 12 Dec 2009 00:16:32 +0000 (16:16 -0800)]
omap: mux: Add new style pin multiplexing data for 34xx

Add new style mux data for 34xx. This should also
work with 3630 easily by adding the processor subset
and ball data.

Note that this data is __initdata, and gets optimized
out except for the GPIO pins if CONFIG_OMAP_MUX
is not set.

Also note that this data uses omap3630 naming for
the SDMMC registers instead of 34xx naming with just
MMC.

Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap: mux: Add new style pin multiplexing code for omap3
Tony Lindgren [Sat, 12 Dec 2009 00:16:32 +0000 (16:16 -0800)]
omap: mux: Add new style pin multiplexing code for omap3

Initially only for 34xx. This code allows us to:

- Make the code more generic as the omap internal signal
  names can stay the same across omap generations for some
  devices

- Map mux registers to GPIO registers that is needed for
  dynamic muxing of pins during off-idle

- Override bootloader mux values via kernel cmdline using
  omap_mux=some.signa1=0x1234,some.signal2=0x1234

- View and set the mux registers via debugfs if
  CONFIG_DEBUG_FS is enabled

Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoomap2: mux: intoduce omap_mux_{read,write}
Mike Rapoport [Sat, 12 Dec 2009 00:16:31 +0000 (16:16 -0800)]
omap2: mux: intoduce omap_mux_{read,write}

intoduce omap_mux_{read,write}

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
14 years agoMerge branch 'for_2_6_33' of git://git.pwsan.com/linux-2.6 into omap-for-linus
Tony Lindgren [Sat, 12 Dec 2009 00:16:02 +0000 (16:16 -0800)]
Merge branch 'for_2_6_33' of git://git.pwsan.com/linux-2.6 into omap-for-linus

14 years agoARM: OMAP4: PM: Add init api for DPLL nodes
Rajendra Nayak [Wed, 9 Dec 2009 01:47:17 +0000 (18:47 -0700)]
ARM: OMAP4: PM: Add init api for DPLL nodes

An api at init for all dpll nodes seem to be
needed to reparent the dpll clk node to its
bypass clk in case the dpll is in bypass.
If not done this causes sequencing issues at init
during propogate_rate.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
14 years agoARM: OMAP4: PM: Add support for OMAP4 dpll api's
Rajendra Nayak [Wed, 9 Dec 2009 01:47:16 +0000 (18:47 -0700)]
ARM: OMAP4: PM: Add support for OMAP4 dpll api's

Most of the dpll api's from dpll.c are reused for OMAP4.
This patch does extend a few api's for OMAP4 support.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
14 years agoARM: OMAP4: PM: Move DPLL control apis to dpll.c
Rajendra Nayak [Wed, 9 Dec 2009 01:47:16 +0000 (18:47 -0700)]
ARM: OMAP4: PM: Move DPLL control apis to dpll.c

This patch moves all the dpll control api's to a
common file dpll.c. This is in preperation of omap4
support wherein most of these api's can be reused.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
14 years agoARM: OMAP4: PM: Add dummy hooks for OMAP4 dpll api's
Rajendra Nayak [Tue, 8 Dec 2009 18:31:44 +0000 (00:01 +0530)]
ARM: OMAP4: PM: Add dummy hooks for OMAP4 dpll api's

This patch adds dummy hooks for OMAP4 dpll api's. Removes
dummy hooks for clkdev api's and enables CLKDEV
for OMAP4.
Also comments clockdomain calls from within the clock
framework as its not supported yet for OMAP4.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
14 years agoARM: OMAP4: PM: OMAP4 clock tree and clkdev registration
Rajendra Nayak [Wed, 9 Dec 2009 01:46:28 +0000 (18:46 -0700)]
ARM: OMAP4: PM: OMAP4 clock tree and clkdev registration

This patch defines all the clock nodes in OMAP4430
platform. All the clock node structs and the clkdev table is
autogenerated using a python script (gen_clock_tree.py)
developed by Paul Walmsley, Benoit Cousson and Rajendra Nayak.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
14 years agoARM: OMAP4: PM: Adds CM1/2 register field masks
Rajendra Nayak [Wed, 9 Dec 2009 01:24:54 +0000 (18:24 -0700)]
ARM: OMAP4: PM: Adds CM1/2 register field masks

This patch adds OMAP4 specific CM1 and CM2 module
register field masks. Auto generated using a python
script (gen_cm_shifts_and_mask.py) developed by Benoit
Cousson, Paul Walmsley and Rajendra Nayak.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
14 years agoARM: OMAP4: PM: Adds PRM register shift and mask bits
Rajendra Nayak [Wed, 9 Dec 2009 01:24:52 +0000 (18:24 -0700)]
ARM: OMAP4: PM: Adds PRM register shift and mask bits

This patch adds OMAP4 specific PRM register bit field
shifts and masks. Auto generated using a python script
(gen_prm_shifts_and_mask.py) developed by Benoit Cousson,
Paul Walmsley and Rajendra Nayak.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
14 years agoARM: OMAP4: PM: Adds PRM register defs for OMAP4
Rajendra Nayak [Wed, 9 Dec 2009 01:24:51 +0000 (18:24 -0700)]
ARM: OMAP4: PM: Adds PRM register defs for OMAP4

This patch adds OMAP4 specific PRM register defs. Auto generated
using a python script (gen_prm_4430_h.py) developed by Paul
Walmsley and Benoit Cousson.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
14 years agoARM: OMAP4: PM: Adds CM1/2 register defs for OMAP4
Rajendra Nayak [Wed, 9 Dec 2009 01:24:50 +0000 (18:24 -0700)]
ARM: OMAP4: PM: Adds CM1/2 register defs for OMAP4

This patch adds OMAP4 specific CM1 and CM2 module
register defs. Autogenerated using a python scripts
(gen_cm1_4430_h.py,gen_cm2_4430_h.py) developed
by Paul Walmsley and Benoit Cousson.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
14 years agoARM: OMAP4: PM: PRM/CM module offsets for OMAP4
Rajendra Nayak [Wed, 9 Dec 2009 01:24:49 +0000 (18:24 -0700)]
ARM: OMAP4: PM: PRM/CM module offsets for OMAP4

This patch adds the offsets for new modules in PRM
and CM for OMAP4
These are autogenerated using a python script (gen_prcm44xx_h.py)
developed by Paul Walmsley and Benoit Cousson.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>