Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is seven small fixes which are all for user visible issues that
fortunately only occur in rare circumstances.
The most serious is the sr one in which QEMU can cause us to read
beyond the end of a buffer (I don't think it's exploitable, but just
in case).
The next is the sd capacity fix which means all non 512 byte sector
drives greater than 2TB fail to be correctly sized.
The rest are either in new drivers (qedf) or on error legs"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ipr: do not set DID_PASSTHROUGH on CHECK CONDITION
scsi: aacraid: fix PCI error recovery path
scsi: sd: Fix capacity calculation with 32-bit sector_t
scsi: qla2xxx: Add fix to read correct register value for ISP82xx.
scsi: qedf: Fix crash due to unsolicited FIP VLAN response.
scsi: sr: Sanity check returned mode data
scsi: sd: Consider max_xfer_blocks if opt_xfer_blocks is unusable
Merge branch 'parisc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
"Mikulas Patocka fixed a few bugs in our new pa_memcpy() assembler
function, e.g. one bug made the kernel unbootable if source and
destination address are the same"
* 'parisc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: fix bugs in pa_memcpy
[ 1337.483798] ================================================
[ 1337.483999] [ BUG: lock held when returning to user space! ]
[ 1337.484252] 4.11.0-rc6 #19 Not tainted
[ 1337.484423] ------------------------------------------------
[ 1337.484626] mount/14766 is leaving the kernel with locks still held!
[ 1337.484841] 1 lock held by mount/14766:
[ 1337.485017] #0: (&type->s_umount_key#33/1){+.+.+.}, at: [<ffffffff8124171f>] sget_userns+0x2af/0x520
Caught by xfstests generic/413 which tried to mount with the unsupported
mount option dax. Then xfstests generic/422 ran sync which deadlocks.
Signed-off-by: Martin Brandenburg <martin@omnibond.com> Acked-by: Mike Marshall <hubcap@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Normal pathname lookup doesn't allow empty pathnames, but using
AT_EMPTY_PATH (with name_to_handle_at() or fstatat(), for example) you
can trigger an empty pathname lookup.
And not only is the RCU lookup in that case entirely unnecessary
(because we'll obviously immediately finalize the end result), it is
actively wrong.
Why? An empth path is a special case that will return the original
'dirfd' dentry - and that dentry may not actually be RCU-free'd,
resulting in a potential use-after-free if we were to initialize the
path lazily under the RCU read lock and depend on complete_walk()
finalizing the dentry.
The patch 554bfeceb8a22d448cd986fc9efce25e833278a1 ("parisc: Fix access
fault handling in pa_memcpy()") reimplements the pa_memcpy function.
Unfortunatelly, it makes the kernel unbootable. The crash happens in the
function ide_complete_cmd where memcpy is called with the same source
and destination address.
This patch fixes a few bugs in pa_memcpy:
* When jumping to .Lcopy_loop_16 for the first time, don't skip the
instruction "ldi 31,t0" (this bug made the kernel unbootable)
* Use the COND macro when comparing length, so that the comparison is
64-bit (a theoretical issue, in case the length is greater than
0xffffffff)
* Don't use the COND macro after the "extru" instruction (the PA-RISC
specification says that the upper 32-bits of extru result are undefined,
although they are set to zero in practice)
* Fix exception addresses in .Lcopy16_fault and .Lcopy8_fault
* Rename .Lcopy_loop_4 to .Lcopy_loop_8 (so that it is consistent with
.Lcopy8_fault)
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Just a small update to xpad driver to recognize yet another gamepad,
and another change making sure userio.h is exported"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - add support for Razer Wildcat gamepad
uapi: add missing install of userio.h
Pull networking fixes from David Miller:
"Things seem to be settling down as far as networking is concerned,
let's hope this trend continues...
1) Add iov_iter_revert() and use it to fix the behavior of
skb_copy_datagram_msg() et al., from Al Viro.
2) Fix the protocol used in the synthetic SKB we cons up for the
purposes of doing a simulated route lookup for RTM_GETROUTE
requests. From Florian Larysch.
3) Don't add noop_qdisc to the per-device qdisc hashes, from Cong
Wang.
4) Don't call netdev_change_features with the team lock held, from
Xin Long.
5) Revert TCP F-RTO extension to catch more spurious timeouts because
it interacts very badly with some middle-boxes. From Yuchung
Cheng.
6) Fix the loss of error values in l2tp {s,g}etsockopt calls, from
Guillaume Nault.
7) ctnetlink uses bit positions where it should be using bit masks,
fix from Liping Zhang.
8) Missing RCU locking in netfilter helper code, from Gao Feng.
9) Avoid double frees and use-after-frees in tcp_disconnect(), from
Eric Dumazet.
10) Don't do a changelink before we register the netdevice in
bridging, from Ido Schimmel.
11) Lock the ipv6 device address list properly, from Rabin Vincent"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits)
netfilter: ipt_CLUSTERIP: Fix wrong conntrack netns refcnt usage
netfilter: nft_hash: do not dump the auto generated seed
drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201
ipv6: Fix idev->addr_list corruption
net: xdp: don't export dev_change_xdp_fd()
bridge: netlink: register netdevice before executing changelink
bridge: implement missing ndo_uninit()
bpf: reference may_access_skb() from __bpf_prog_run()
tcp: clear saved_syn in tcp_disconnect()
netfilter: nf_ct_expect: use proper RCU list traversal/update APIs
netfilter: ctnetlink: skip dumping expect when nfct_help(ct) is NULL
netfilter: make it safer during the inet6_dev->addr_list traversal
netfilter: ctnetlink: make it safer when checking the ct helper name
netfilter: helper: Add the rcu lock when call __nf_conntrack_helper_find
netfilter: ctnetlink: using bit to represent the ct event
netfilter: xt_TCPMSS: add more sanity tests on tcph->doff
net: tcp: Increase TCP_MIB_OUTRSTS even though fail to alloc skb
l2tp: don't mask errors in pppol2tp_getsockopt()
l2tp: don't mask errors in pppol2tp_setsockopt()
tcp: restrict F-RTO to work-around broken middle-boxes
...
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of small fixes for x86:
- fix locking in RDT to prevent memory leaks and freeing in use
memory
- prevent setting invalid values for vdso32_enabled which cause
inconsistencies for user space resulting in application crashes.
- plug a race in the vdso32 code between fork and sysctl which causes
inconsistencies for user space resulting in application crashes.
- make MPX signal delivery work in compat mode
- make the dmesg output of traps and faults readable again"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel_rdt: Fix locking in rdtgroup_schemata_write()
x86/debug: Fix the printk() debug output of signal_fault(), do_trap() and do_general_protection()
x86/vdso: Plug race between mapping and ELF header setup
x86/vdso: Ensure vdso32_enabled gets set to valid values only
x86/signals: Fix lower/upper bound reporting in compat siginfo
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"The irq department provides:
- two fixes for the CPU affinity spread infrastructure to prevent
unbalanced spreading in corner cases which leads to horrible
performance, because interrupts are rather aggregated than spread
- add a missing spinlock initializer in the imx-gpcv2 init code"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-imx-gpcv2: Fix spinlock initialization
irq/affinity: Fix extra vecs calculation
irq/affinity: Fix CPU spread for unbalanced nodes
Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Thomas Gleixner:
"Three fixes from EFI land:
- prevent accessing a Graphic Output Device (GOP) which the kernel
does not know to handle
- prevent PCI reconfiguration to modify a BAR which covers the
framebuffer because that's already in use through the EFI GOP
interface
- avoid reserving EFI runtime regions as this results in bogus memory
mappings"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Don't try to reserve runtime regions
efi/fb: Avoid reconfiguration of BAR that covers the framebuffer
efi/libstub: Skip GOP with PIXEL_BLT_ONLY format
Merge branch 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Dave Sterba collected a few more fixes for the last rc.
These aren't marked for stable, but I'm putting them in with a batch
were testing/sending by hand for this release"
* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix potential use-after-free for cloned bio
Btrfs: fix segmentation fault when doing dio read
Btrfs: fix invalid dereference in btrfs_retry_endio
btrfs: drop the nossd flag when remounting with -o ssd
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull more CIFS fixes from Steve French:
"As promised, here is the remaining set of cifs/smb3 fixes for stable
(and a fix for one regression) now that they have had additional
review and testing"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Fix SMB3 mount without specifying a security mechanism
CIFS: store results of cifs_reopen_file to avoid infinite wait
CIFS: remove bad_network_name flag
CIFS: reconnect thread reschedule itself
CIFS: handle guest access errors to Windows shares
CIFS: Fix null pointer deref during read resp processing
Merge tag 'fbdev-v4.11-rc6' of git://github.com/bzolnier/linux
Pull fbdev fixes from Bartlomiej Zolnierkiewicz:
- fix probing time checks in omapfb driver (regression fix)
- fix optional VBAT support in ssd1307fb driver (regression fix)
- fix connecting to backend in xen-fbfront driver
* tag 'fbdev-v4.11-rc6' of git://github.com/bzolnier/linux:
fbdev: omapfb: delete check_required_callbacks()
xen, fbfront: fix connecting to backend
fbdev/ssd1307fb: fix optional VBAT support
Merge tag 'pm-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a cpufreq core regression related to CPU online/offline and
several issues in the turbostat and cpupower utilities.
Specifics:
- Allow CPUs to be put back online even if the cpufreq driver is
unable to work with them (eg. due to missing information from
platform firmware), which was the previous behavior expected by
users, but changed in the 4.9 time frame (Chen Yu).
- Fix a few minor issues in the turbostat utility, introduced mostly
during the recent update of it (Len Brown, Doug Smythies).
- Fix a cpupower utility bug causing it to report incorrect values
for turbo frequencies in some cases (Ben Hutchings)"
* tag 'pm-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpupower: Fix turbo frequency reporting for pre-Sandy Bridge cores
cpufreq: Bring CPUs up even if cpufreq_online() failed
tools/power turbostat: update version number
tools/power turbostat: fix impossibly large CPU%c1 value
tools/power turbostat: turbostat.8 add missing column definitions
tools/power turbostat: update HWP dump to decimal from hex
tools/power turbostat: enable package THERM_INTERRUPT dump
tools/power turbostat: show missing Core and GFX power on SKL and KBL
tools/power turbostat: bugfix: GFXMHz column not changing
Merge tag 'acpi-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert a recent ACPICA commit that turned out to be problematic
and fix a device enumeration breakage from the 4.8 cycle.
Specifics:
- Revert a recent ACPICA commit targeted at catching firmware bugs
which promptly did that and caused functional problems to appear
(Rafael Wysocki).
- Fix a device enumeration problem introduced in the 4.8 time frame
which caused the ACPI docking station driver to report incorrect
status via sysfs among other things (Rafael Wysocki)"
* tag 'acpi-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPICA: Resources: Not a valid resource if buffer length too long"
ACPI / scan: Set the visited flag for all enumerated devices
Merge tag 'devmem-v4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CONFIG_STRICT_DEVMEM fix from Kees Cook:
"Fixes /dev/mem to read back zeros for System RAM areas in the 1MB
exception area on x86 to avoid exposing RAM or tripping hardened
usercopy"
* tag 'devmem-v4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
mm: Tighten x86 /dev/mem with zeroing reads
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael S. Tsirkin:
"virtio oops fixes
The virtio pci rework using shared interrupts caused a lot of issues.
We tried to fix them but run out of time. Revert for now, and revisit
the issue for the next kernel.
Luckily we are able to do this without loosing automatic interrupt
NUMA affinity which was the main motivator for the rework"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-pci: Remove affinity hint before freeing the interrupt
Revert "virtio_pci: remove struct virtio_pci_vq_info"
Revert "virtio_pci: use shared interrupts for virtqueues"
Revert "virtio_pci: don't duplicate the msix_enable flag in struct pci_dev"
Revert "virtio_pci: simplify MSI-X setup"
Revert "virtio_pci: fix out of bound access for msix_names"
MAINTAINERS: fix virtio file pattern
virtio_console: fix uninitialized variable use
virtio_net: clear MTU when out of range
virtio: allow drivers to validate features
virtio_net: enable big packets for large MTU values
Aaro Koskinen [Fri, 14 Apr 2017 11:38:32 +0000 (13:38 +0200)]
fbdev: omapfb: delete check_required_callbacks()
Commit 561eb9d09a93 ("fbdev: omap/lcd: Make callbacks optional") made
panel callbacks optional but forgot to update check_required_callbacks().
As a result many (all?) OMAP systems using omapfb will crash at boot.
Fix by deleting the whole function.
Fixes: 561eb9d09a93 ("fbdev: omap/lcd: Make callbacks optional") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Merge branches 'pm-cpufreq-fixes' and 'pm-tools-fixes'
* pm-cpufreq-fixes:
cpufreq: Bring CPUs up even if cpufreq_online() failed
* pm-tools-fixes:
cpupower: Fix turbo frequency reporting for pre-Sandy Bridge cores
tools/power turbostat: update version number
tools/power turbostat: fix impossibly large CPU%c1 value
tools/power turbostat: turbostat.8 add missing column definitions
tools/power turbostat: update HWP dump to decimal from hex
tools/power turbostat: enable package THERM_INTERRUPT dump
tools/power turbostat: show missing Core and GFX power on SKL and KBL
tools/power turbostat: bugfix: GFXMHz column not changing
The presence of 'thp: reduce indentation level in change_huge_pmd()'
is unfortunate. But the patchset had been decently reviewed and tested
before we decided it was needed in -stable and I felt it best not to
churn things at the last minute"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mailmap: add Martin Kepplinger's email
zsmalloc: expand class bit
zram: do not use copy_page with non-page aligned address
zram: fix operator precedence to get offset
hugetlbfs: fix offset overflow in hugetlbfs mmap
thp: fix MADV_DONTNEED vs clear soft dirty race
thp: fix MADV_DONTNEED vs. MADV_FREE race
mm: drop unused pmdp_huge_get_and_clear_notify()
thp: fix MADV_DONTNEED vs. numa balancing race
thp: reduce indentation level in change_huge_pmd()
z3fold: fix page locking in z3fold_alloc()
Minchan Kim [Thu, 13 Apr 2017 21:56:40 +0000 (14:56 -0700)]
zsmalloc: expand class bit
Now 64K page system, zsamlloc has 257 classes so 8 class bit is not
enough. With that, it corrupts the system when zsmalloc stores
65536byte data(ie, index number 256) so that this patch increases class
bit for simple fix for stable backport. We should clean up this mess
soon.
Minchan Kim [Thu, 13 Apr 2017 21:56:37 +0000 (14:56 -0700)]
zram: do not use copy_page with non-page aligned address
The copy_page is optimized memcpy for page-alinged address. If it is
used with non-page aligned address, it can corrupt memory which means
system corruption. With zram, it can happen with
1. 64K architecture
2. partial IO
3. slub debug
Partial IO need to allocate a page and zram allocates it via kmalloc.
With slub debug, kmalloc(PAGE_SIZE) doesn't return page-size aligned
address. And finally, copy_page(mem, cmem) corrupts memory.
So, this patch changes it to memcpy.
Actuaully, we don't need to change zram_bvec_write part because zsmalloc
returns page-aligned address in case of PAGE_SIZE class but it's not
good to rely on the internal of zsmalloc.
Note:
When this patch is merged to stable, clear_page should be fixed, too.
Unfortunately, recent zram removes it by "same page merge" feature so
it's hard to backport this patch to -stable tree.
I will handle it when I receive the mail from stable tree maintainer to
merge this patch to backport.
Fixes: 42e99bd ("zram: optimize memory operations with clear_page()/copy_page()") Link: http://lkml.kernel.org/r/1492042622-12074-2-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Thu, 13 Apr 2017 21:56:35 +0000 (14:56 -0700)]
zram: fix operator precedence to get offset
In zram_rw_page, the logic to get offset is wrong by operator precedence
(i.e., "<<" is higher than "&"). With wrong offset, zram can corrupt
the user's data. This patch fixes it.
Fixes: 8c7f01025 ("zram: implement rw_page operation of zram") Link: http://lkml.kernel.org/r/1492042622-12074-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Kravetz [Thu, 13 Apr 2017 21:56:32 +0000 (14:56 -0700)]
hugetlbfs: fix offset overflow in hugetlbfs mmap
If mmap() maps a file, it can be passed an offset into the file at which
the mapping is to start. Offset could be a negative value when
represented as a loff_t. The offset plus length will be used to update
the file size (i_size) which is also a loff_t.
Validate the value of offset and offset + length to make sure they do
not overflow and appear as negative.
Found by syzcaller with commit ff8c0c53c475 ("mm/hugetlb.c: don't call
region_abort if region_chg fails") applied. Prior to this commit, the
overflow would still occur but we would luckily return ENOMEM.
Both MADV_DONTNEED and MADV_FREE handled with down_read(mmap_sem).
It's critical to not clear pmd intermittently while handling MADV_FREE
to avoid race with MADV_DONTNEED:
CPU0: CPU1:
madvise_free_huge_pmd()
pmdp_huge_get_and_clear_full()
madvise_dontneed()
zap_pmd_range()
pmd_trans_huge(*pmd) == 0 (without ptl)
// skip the pmd
set_pmd_at();
// pmd is re-established
It results in MADV_DONTNEED skipping the pmd, leaving it not cleared.
It violates MADV_DONTNEED interface and can result is userspace
misbehaviour.
Basically it's the same race as with numa balancing in
change_huge_pmd(), but a bit simpler to mitigate: we don't need to
preserve dirty/young flags here due to MADV_FREE functionality.
[kirill.shutemov@linux.intel.com: Urgh... Power is special again] Link: http://lkml.kernel.org/r/20170303102636.bhd2zhtpds4mt62a@black.fi.intel.com Link: http://lkml.kernel.org/r/20170302151034.27829-4-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case prot_numa, we are under down_read(mmap_sem). It's critical to
not clear pmd intermittently to avoid race with MADV_DONTNEED which is
also under down_read(mmap_sem):
CPU0: CPU1:
change_huge_pmd(prot_numa=1)
pmdp_huge_get_and_clear_notify()
madvise_dontneed()
zap_pmd_range()
pmd_trans_huge(*pmd) == 0 (without ptl)
// skip the pmd
set_pmd_at();
// pmd is re-established
The race makes MADV_DONTNEED miss the huge pmd and don't clear it
which may break userspace.
Found by code analysis, never saw triggered.
Link: http://lkml.kernel.org/r/20170302151034.27829-3-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stress testing of the current z3fold implementation on a 8-core system
revealed it was possible that a z3fold page deleted from its unbuddied
list in z3fold_alloc() would be put on another unbuddied list by
z3fold_free() while z3fold_alloc() is still processing it. This has
been introduced with commit 5a27aa822 ("z3fold: add kref refcounting")
due to the removal of special handling of a z3fold page not on any list
in z3fold_free().
To fix this, the z3fold page lock should be taken in z3fold_alloc()
before the pool lock is released. To avoid deadlocking, we just try to
lock the page as soon as we get a hold of it, and if trylock fails, we
drop this page and take the next one.
Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: <Oleksiy.Avramchenko@sony.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Keith Busch [Thu, 13 Apr 2017 17:28:12 +0000 (13:28 -0400)]
irq/affinity: Fix extra vecs calculation
This fixes a math error calculating the extra_vecs. The error assumed
only 1 cpu per vector, but the value needs to account for the actual
number of cpus per vector in order to get the correct remainder for
extra CPU assignment.
Current codes invoke wrongly nf_ct_netns_get in the destroy routine,
it should use nf_ct_netns_put, not nf_ct_netns_get.
It could cause some modules could not be unloaded.
Fixes: ecb2421b5ddf ("netfilter: add and use nf_ct_netns_get/put") Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Revert "ACPICA: Resources: Not a valid resource if buffer length too long"
Revert commit 57707a9a7780 (ACPICA: Resources: Not a valid resource if
buffer length too long) as it is reported to prevent the TPM module
from loading on Lenovo X60 with Coreboot.
It also causes new confusing warnings to show up in the kernel log.
Merge tag 'pinctrl-v4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Two pin control fixes arriving late, these are hopefully the last pin
control fixes I send this kernel cycle. A Chromebook and an Exynos SoC
thingie.
The Exynos patch is pretty big, it is fixing unbroken a breakage
caused by yours truly when trying to figure out the merge mess with
the different Samsung platforms for this merge window. Sorry about
that. We have countered this situation by assigning a Samsung pin
control submaintainer to catch stuff earlier.
Summary:
- Make the Acer Chromebook keyboard work again with the Intel
Cherryview driver.
- Fix a merge error in the Exynos 5433 driver"
* tag 'pinctrl-v4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: cherryview: Add a quirk to make Acer Chromebook keyboard work again
pinctrl: samsung: Add missing part for PINCFG_TYPE_DRV of Exynos5433
Pavel Shilovsky [Wed, 12 Apr 2017 20:32:07 +0000 (13:32 -0700)]
CIFS: Fix SMB3 mount without specifying a security mechanism
Commit ef65aaede23f ("smb2: Enforce sec= mount option") changed the
behavior of a mount command to enforce a specified security mechanism
during mounting. On another hand according to the spec if SMB3 server
doesn't respond with a security context it implies that it supports
NTLMSSP. The current code doesn't keep it in mind and fails a mount
for such servers if no security mechanism is specified. Fix this by
indicating that a server supports NTLMSSP if a security context isn't
returned during negotiate phase. This allows the code to use NTLMSSP
by default for SMB3 mounts.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com>
Ben Hutchings [Mon, 10 Apr 2017 23:29:44 +0000 (00:29 +0100)]
cpupower: Fix turbo frequency reporting for pre-Sandy Bridge cores
The switch that conditionally sets CPUPOWER_CAP_HAS_TURBO_RATIO and
CPUPOWER_CAP_IS_SNB flags is missing a break, so all cores get both
flags set and an assumed base clock of 100 MHz for turbo values.
Reported-by: GSR <gsr.bugs@infernal-iceberg.com> Tested-by: GSR <gsr.bugs@infernal-iceberg.com>
References: https://bugs.debian.org/859978 Fixes: 8fb2e440b223 (cpupower: Show Intel turbo ratio support via ...) Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat utility fixes for v4.11 from Len Brown.
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: update version number
tools/power turbostat: fix impossibly large CPU%c1 value
tools/power turbostat: turbostat.8 add missing column definitions
tools/power turbostat: update HWP dump to decimal from hex
tools/power turbostat: enable package THERM_INTERRUPT dump
tools/power turbostat: show missing Core and GFX power on SKL and KBL
tools/power turbostat: bugfix: GFXMHz column not changing
Merge tag 'drm-fixes-for-v4.11-rc7' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"i915, gvt, nouveau, udl and etnaviv fixes.
I was away the end of last week, so some of these would have been in
rc6, and it's Easter from tomorrow, so I decided I better dequeue what
I have now.
The nouveau changes, just add a hw enable for GP107 display (like a
pci id addition really), and fix a couple of regressions. i915 has
some more gvt fixes, along with a few run of the mill ones, the rcu
one seems like a few people have hit it.
Otherwise a small udl and small etnaviv fix"
* tag 'drm-fixes-for-v4.11-rc7' of git://people.freedesktop.org/~airlied/linux: (22 commits)
drm/etnaviv: fix missing unlock on error in etnaviv_gpu_submit()
drm/udl: Fix unaligned memory access in udl_render_hline
drm/i915: Don't call synchronize_rcu_expedited under struct_mutex
drm/i915: Suspend GuC prior to GPU Reset during GEM suspend
drm/nouveau: initial support (display-only) for GP107
drm/nouveau/kms/nv50: fix double dma_fence_put() when destroying plane state
drm/nouveau/kms/nv50: fix setting of HeadSetRasterVertBlankDmi method
drm/nouveau/mmu/nv4a: use nv04 mmu rather than the nv44 one
drm/nouveau/mpeg: mthd returns true on success now
drm/i915/gvt: set the correct default value of CTX STATUS PTR
drm/i915/gvt: Fix firmware loading interface for GVT-g golden HW state
drm/i915: Use a dummy timeline name for a signaled fence
drm/i915: Ironlake do_idle_maps w/a may be called w/o struct_mutex
drm/i915/gvt: remove the redundant info NULL check
drm/i915/gvt: adjust mem size for low resolution type
drm/i915: Avoid lock dropping between rescheduling
drm/i915/gvt: exclude cfg space from failsafe mode
drm/i915/gvt: Activate/de-activate vGPU in mdev ops.
drm/i915/execlists: Wrap tail pointer after reset tweaking
drm/i915/perf: remove user triggerable warn
...
Merge tag 'pwm/for-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"This contain a fix for the atomic update support recently added to
the Rockchip driver where the clock reference count would become
unbalanced and result in the clock feeding the PWM to always be
disabled.
Another fix to the Intel LPSS driver that adds an update bit quirk
required for a specific configuration"
* tag 'pwm/for-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: rockchip: State of PWM clock should synchronize with PWM enabled state
pwm: lpss: Set enable-bit before waiting for update-bit to go low
pwm: lpss: Split Tangier configuration
Reserving a runtime region results in splitting the EFI memory
descriptors for the runtime region. This results in runtime region
descriptors with bogus memory mappings, leading to interesting crashes
like the following during a kexec:
ACPI / scan: Set the visited flag for all enumerated devices
Commit 10c7e20b2ff3 (ACPI / scan: fix enumeration (visited) flags for
bus rescans) attempted to fix a problem with ACPI-based enumerateion
of I2C/SPI devices, but it forgot to ensure that the visited flag
will be set for all of the other enumerated devices, so fix that.
Fixes: 10c7e20b2ff3 (ACPI / scan: fix enumeration (visited) flags for bus rescans) Link: https://bugzilla.kernel.org/show_bug.cgi?id=194885 Reported-and-tested-by: Kevin Locke <kevin@kevinlocke.name> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: 4.8+ <stable@vger.kernel.org> # 4.8+
cpufreq: Bring CPUs up even if cpufreq_online() failed
There is a report that after commit 27622b061eb4 ("cpufreq: Convert
to hotplug state machine"), the normal CPU offline/online cycle
fails on some platforms.
According to the ftrace result, this problem was triggered on
platforms using acpi-cpufreq as the default cpufreq driver,
and due to the lack of some ACPI freq method (eg. _PCT),
cpufreq_online() failed and returned a negative value, so the CPU
hotplug state machine rolled back the CPU online process. Actually,
from the user's perspective, the failure of cpufreq_online() should
not prevent that CPU from being brought up, although cpufreq might
not work on that CPU.
BTW, during system startup cpufreq_online() is not invoked via CPU
online but by the cpufreq device creation process, so the APs can be
brought up even though cpufreq_online() fails in that stage.
This patch ignores the return value of cpufreq_online/offline() and
lets the cpufreq framework deal with the failure. cpufreq_online()
itself will do a proper rollback in that case and if _PCT is missing,
the ACPI cpufreq driver will print a warning if the corresponding
debug options have been enabled.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=194581 Fixes: 27622b061eb4 ("cpufreq: Convert to hotplug state machine") Reported-and-tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Len Brown [Wed, 12 Apr 2017 23:44:51 +0000 (19:44 -0400)]
tools/power turbostat: fix impossibly large CPU%c1 value
Most CPUs do not have a hardware c1 counter,
and so turbostat derives c1 residency:
c1 = TSC - MPERF - other_core_cstate_counters
As it is not possible to atomically read these coutners,
measurement jitter can case this calcuation to "go negative"
when very close to 0. Turbostat detect that case and
simply prints c1 = 0.00%
But that check neglected to account for systems where the TSC
crystal clock domain and the MPERF BCLK domain are differ by
a small amount. That allowed very small negative c1 numbers
to escape this check and be printed as huge positve numbers.
This code begs for a bit of cleanup, but this patch
is the minimal change to fix the issue.
Dave Airlie [Wed, 12 Apr 2017 23:56:05 +0000 (09:56 +1000)]
Merge branch 'linux-4.11' of git://github.com/skeggsb/linux into drm-fixes
GP107 modesetting support (just recognising the chipset, no other changes until 4.12)
a couple of regression fixes, one of them a rather serious double-free issue that appeared in 4.10.
* 'linux-4.11' of git://github.com/skeggsb/linux:
drm/nouveau: initial support (display-only) for GP107
drm/nouveau/kms/nv50: fix double dma_fence_put() when destroying plane state
drm/nouveau/kms/nv50: fix setting of HeadSetRasterVertBlankDmi method
drm/nouveau/mmu/nv4a: use nv04 mmu rather than the nv44 one
drm/nouveau/mpeg: mthd returns true on success now
Dave Airlie [Wed, 12 Apr 2017 23:13:04 +0000 (09:13 +1000)]
Merge tag 'drm-intel-fixes-2017-04-12' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes
drm/i915 fixes for v4.11-rc7
one rcu related fix, and a few GVT fixes.
* tag 'drm-intel-fixes-2017-04-12' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Don't call synchronize_rcu_expedited under struct_mutex
drm/i915: Suspend GuC prior to GPU Reset during GEM suspend
drm/i915/gvt: set the correct default value of CTX STATUS PTR
drm/i915/gvt: Fix firmware loading interface for GVT-g golden HW state
drm/i915: Use a dummy timeline name for a signaled fence
drm/i915: Ironlake do_idle_maps w/a may be called w/o struct_mutex
drm/i915/gvt: remove the redundant info NULL check
drm/i915/gvt: adjust mem size for low resolution type
drm/i915: Avoid lock dropping between rescheduling
drm/i915/gvt: exclude cfg space from failsafe mode
drm/i915/gvt: Activate/de-activate vGPU in mdev ops.
drm/i915/execlists: Wrap tail pointer after reset tweaking
drm/i915/perf: remove user triggerable warn
drm/i915/perf: destroy stream on sample_flags mismatch
drm/i915: Align "unfenced" tiled access on gen2, early gen3
Under CONFIG_STRICT_DEVMEM, reading System RAM through /dev/mem is
disallowed. However, on x86, the first 1MB was always allowed for BIOS
and similar things, regardless of it actually being System RAM. It was
possible for heap to end up getting allocated in low 1MB RAM, and then
read by things like x86info or dd, which would trip hardened usercopy:
This changes the x86 exception for the low 1MB by reading back zeros for
System RAM areas instead of blindly allowing them. More work is needed to
extend this to mmap, but currently mmap doesn't go through usercopy, so
hardened usercopy won't Oops the kernel.
Reported-by: Tommi Rantala <tommi.t.rantala@nokia.com> Tested-by: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by: Kees Cook <keescook@chromium.org>
Fixes: 6a923934c33 (Revert "ipv6: Revert optional address flusing on ifdown.") Signed-off-by: Rabin Vincent <rabinv@axis.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Wed, 12 Apr 2017 07:32:07 +0000 (09:32 +0200)]
net: xdp: don't export dev_change_xdp_fd()
Since dev_change_xdp_fd() is only used in rtnetlink, which must
be built-in, there's no reason to export dev_change_xdp_fd().
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit
Pull audit fix from Paul Moore:
"One more small audit fix, this should be the last for v4.11.
Seth Forshee noticed a problem where the audit retry queue wasn't
being flushed properly when audit was enabled and the audit daemon
wasn't running; this patches fixes the problem (see the commit
description for more details on the change).
Both Seth and I have tested this and everything looks good"
* 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit:
audit: make sure we don't let the retry queue grow without bounds
- Fix iscsi-target + iser-target queue-full handling in order to
support iw_cxgb4 RNICs. (Potnuri Bharat Teja + Sagi Grimberg)
- Fix ALUA transition state race between multiple initiator (Mike
Christie)
- Drop work-around for legacy GlobalSAN initiator, to allow QLogic
57840S + 579xx offload HBAs to work out-of-the-box in MSFT
environments. (Martin Svec + Arun Easi)
Note that a number are CC'ed for stable, and although the queue-full
bug-fixes required for iser-target to work with iw_cxgb4 aren't CC'ed
here, they'll be posted to Greg-KH separately"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
tcmu: Skip Data-Out blocks before gathering Data-In buffer for BIDI case
iscsi-target: Drop work-around for legacy GlobalSAN initiator
target: Fix ALUA transition state race between multiple initiators
iser-target: avoid posting a recv buffer twice
iser-target: Fix queue-full response handling
iscsi-target: Propigate queue_data_in + queue_status errors
target: Fix unknown fabric callback queue-full errors
tcmu: Fix wrongly calculating of the base_command_size
tcmu: Fix possible overwrite of t_data_sg's last iov[]
target: Avoid mappedlun symlink creation during lun shutdown
iscsi-target: Fix TMR reference leak during session shutdown
usb: gadget: Correct usb EP argument for BOT status request
tcmu: Allow cmd_time_out to be set to zero (disabled)
Merge branch 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"This contains fixes for two long standing subtle bugs:
- kthread_bind() on a new kthread binds it to specific CPUs and
prevents userland from messing with the affinity or cgroup
membership. Unfortunately, for cgroup membership, there's a window
between kthread creation and kthread_bind*() invocation where the
kthread can be moved into a non-root cgroup by userland.
Depending on what controllers are in effect, this can assign the
kthread unexpected attributes. For example, in the reported case,
workqueue workers ended up in a non-root cpuset cgroups and had
their CPU affinities overridden. This broke workqueue invariants
and led to workqueue stalls.
Fixed by closing the window between kthread creation and
kthread_bind() as suggested by Oleg.
- There was a bug in cgroup mount path which could allow two
competing mount attempts to attach the same cgroup_root to two
different superblocks.
This was caused by mishandling return value from kernfs_pin_sb().
Fixed"
* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: avoid attaching a cgroup root to two different superblocks
cgroup, kthread: close race window where new kthreads can be migrated to non-root cgroups
Merge branch 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"Two libata fixes.
One to disable hotplug on VT6420 which never worked properly. The
other reverts an earlier patch which disabled the second port on
SB600/700. There were some confusions due to earlier datasheets which
incorrectly indicated that the second port is not implemented on both
SB600 and 700"
* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
sata_via: Enable hotplug only on VT6421
Revert "pata_atiixp: Don't use unconnected secondary port on SB600/SB700"
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- revert of a commit that switched all Synaptics touchpads over to be
driven by hid-rmi. It turns out that this caused several user-visible
regressions, and therefore we revert back to the original state
before all the reported issues have been fixed.
- a new uclogic device ID addition, from Xiaolei Yu.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
Revert "HID: rmi: Handle all Synaptics touchpads using hid-rmi"
HID: uclogic: add support for Ugee Tablet EX07S
The problem is that the bridge's VLAN group is created after setting the
default PVID, when registering the netdevice and executing its
ndo_init().
Fix this by changing the order of both operations, so that
br_changelink() is only processed after the netdevice is registered,
when the VLAN group is already initialized.
Fixes: b6677449dff6 ("bridge: netlink: call br_changelink() during br_dev_newlink()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Peter V. Saveliev <peter@svinota.eu> Tested-by: Peter V. Saveliev <peter@svinota.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
While the bridge driver implements an ndo_init(), it was missing a
symmetric ndo_uninit(), causing the different de-initialization
operations to be scattered around its dellink() and destructor().
Implement a symmetric ndo_uninit() and remove the overlapping operations
from its dellink() and destructor().
This is a prerequisite for the next patch, as it allows us to have a
proper cleanup upon changelink() failure during the bridge's newlink().
Fixes: b6677449dff6 ("bridge: netlink: call br_changelink() during br_dev_newlink()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
scsi: ipr: do not set DID_PASSTHROUGH on CHECK CONDITION
On a dual controller setup with multipath enabled, some MEDIUM ERRORs
caused both paths to be failed, thus I/O got queued/blocked since the
'queue_if_no_path' feature is enabled by default on IPR controllers.
This example disabled 'queue_if_no_path' so the I/O failure is seen at
the sg_dd program. Notice that after the sg_dd test-case, both paths
are in 'failed' state, and both path/priority groups are in 'enabled'
state (not 'active') -- which would block I/O with 'queue_if_no_path'.
This is not the desired behavior. The dm-multipath explicitly checks
for the MEDIUM ERROR case (and a few others) so not to fail the path
(e.g., I/O to other sectors could potentially happen without problems).
See dm-mpath.c :: do_end_io_bio() -> noretry_error() !->! fail_path().
The problem trace is:
1) ipr_scsi_done() // SENSE KEY/CHECK CONDITION detected, go to..
2) ipr_erp_start() // ipr_is_gscsi() and masked_ioasc OK, go to..
3) ipr_gen_sense() // masked_ioasc is IPR_IOASC_MED_DO_NOT_REALLOC,
// so set DID_PASSTHROUGH.
4) scsi_decide_disposition() // check for DID_PASSTHROUGH and return
// early on, faking a DID_OK.. *instead*
// of reaching scsi_check_sense().
// Had it reached the latter, that would
// set host_byte to DID_MEDIUM_ERROR.
5) scsi_finish_command()
6) scsi_io_completion()
7) __scsi_error_from_host_byte() // That would be converted to -ENODATA
<...>
8) dm_softirq_done()
9) multipath_end_io()
10) do_end_io()
11) noretry_error() // And that is checked in dm-mpath :: noretry_error()
// which would cause fail_path() not to be called.
With this patch applied, the I/O is failed but the paths are not. This
multipath device continues accepting more I/O requests without blocking.
(and notice the different host byte/driver byte handling per SCSI layer).
# dmesg
[...] sd 2:2:7:0: [sdaf] Done: SUCCESS Result: hostbyte=0x13 driverbyte=DRIVER_OK
[...] sd 2:2:7:0: [sdaf] CDB: Read(10) 28 00 00 00 00 00 00 00 40 00
[...] sd 2:2:7:0: [sdaf] Sense Key : Medium Error [current]
[...] sd 2:2:7:0: [sdaf] Add. Sense: Unrecovered read error - recommend rewrite the data
[...] blk_update_request: critical medium error, dev sdaf, sector 0
[...] blk_update_request: critical medium error, dev dm-6, sector 0
[...] sd 2:2:7:0: [sdaf] Done: SUCCESS Result: hostbyte=0x13 driverbyte=DRIVER_OK
[...] sd 2:2:7:0: [sdaf] CDB: Read(10) 28 00 00 00 00 00 00 00 10 00
[...] sd 2:2:7:0: [sdaf] Sense Key : Medium Error [current]
[...] sd 2:2:7:0: [sdaf] Add. Sense: Unrecovered read error - recommend rewrite the data
[...] blk_update_request: critical medium error, dev sdaf, sector 0
[...] blk_update_request: critical medium error, dev dm-6, sector 0
[...] Buffer I/O error on dev dm-6, logical block 0, async page read
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During a PCI error recovery, if aac_check_health() is not aware that a
PCI error happened and we have an offline PCI channel, it might trigger
some errors (like NULL pointer dereference) and inhibit the error
recovery process to complete.
This patch makes the health check procedure aware of PCI channel issues,
and in case of error recovery process, the function
aac_adapter_check_health() returns -1 and let the recovery process to
complete successfully. This patch was tested on upstream kernel
v4.11-rc5 in PowerPC ppc64le architecture with adapter 9005:028d
(VID:DID) - the error recovery procedure was able to recover fine.
Fixes: 5c63f7f710bd ("aacraid: Added EEH support") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Liu Bo [Mon, 10 Apr 2017 19:36:26 +0000 (12:36 -0700)]
Btrfs: fix potential use-after-free for cloned bio
KASAN reports that there is a use-after-free case of bio in btrfs_map_bio.
If we need to submit IOs to several disks at a time, the original bio
would get cloned and mapped to the destination disk, but we really should
use the original bio instead of a cloned bio to do the sanity check
because cloned bios are likely to be freed by its endio.
Reported-by: Diego <diegocg@gmail.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Fri, 7 Apr 2017 20:11:10 +0000 (13:11 -0700)]
Btrfs: fix segmentation fault when doing dio read
Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
introduced this bug during iterating bio pages in dio read's endio hook,
and it could end up with segment fault of the dio reading task.
So the reason is 'if (nr_sectors--)', and it makes the code assume that
there is one more block in the same page, so page offset is increased and
the bio which is created to repair the bad block then has an incorrect
bvec.bv_offset, and a later access of the page content would throw a
segmentation fault.
This also adds ASSERT to check page offset against page size.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
It turns out that btrfs_retry_endio is trying to get inode from a directIO
page.
This fixes the problem by using the saved inode pointer, done->inode.
btrfs_retry_endio_nocsum has the same problem, and it's fixed as well.
Also cleanup unused @start (which is too trivial for a separate patch).
Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Adam Borowski [Fri, 31 Mar 2017 15:19:04 +0000 (17:19 +0200)]
btrfs: drop the nossd flag when remounting with -o ssd
The opposite case was already handled right in the very next switch entry.
And also when turning on nossd, drop ssd_spread.
Reported-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com> Signed-off-by: Adam Borowski <kilobyte@angband.pl> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Berg [Tue, 11 Apr 2017 10:10:58 +0000 (12:10 +0200)]
bpf: reference may_access_skb() from __bpf_prog_run()
It took me quite some time to figure out how this was linked,
so in order to save the next person the effort of finding it
add a comment in __bpf_prog_run() that indicates what exactly
determines that a program can access the ctx == skb.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
drm/i915: Don't call synchronize_rcu_expedited under struct_mutex
Only call synchronize_rcu_expedited after unlocking struct_mutex to
avoid deadlock because the workqueues depend on struct_mutex.
>From original patch by Andrea:
synchronize_rcu/synchronize_sched/synchronize_rcu_expedited() will
hang until its own workqueues are run. The i915 gem workqueues will
wait on the struct_mutex to be released. So we cannot wait for a
quiescent state using those rcu primitives while holding the
struct_mutex or it creates a circular lock dependency resulting in
kernel hangs (which is reproducible but goes undetected by lockdep).
Fixes: 3d3d18f086cd ("drm/i915: Avoid rcu_barrier() from reclaim paths (shrinker)") Reported-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 8f612d055183545070ca1009ac2eb1f2e044cc20) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm/i915: Suspend GuC prior to GPU Reset during GEM suspend
i915 is currently doing a full GPU reset at the end of
i915_gem_suspend() followed by GuC suspend in i915_drm_suspend(). This
GPU reset clobbers the GuC, causing the suspend request to then fail,
leaving the GuC in an undefined state. We need to tell the GuC to
suspend before we do the direct intel_gpu_reset().
v2: Commit message update. (Chris, Daniele)
Fixes: 1c777c5d1dcd ("drm/i915/hsw: Fix GPU hang during resume from S3-devices state") Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491387710-20553-1-git-send-email-sagar.a.kamble@intel.com Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit fd08923384385400101c71ac0d21d37d6b23b00d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Mika Westerberg [Mon, 10 Apr 2017 10:16:33 +0000 (13:16 +0300)]
pinctrl: cherryview: Add a quirk to make Acer Chromebook keyboard work again
After commit 47c950d10202 ("pinctrl: cherryview: Do not add all
southwest and north GPIOs to IRQ domain") the driver does not add all
GPIOs to the irqdomain. The reason for that is that those GPIOs cannot
generate IRQs at all, only GPEs (General Purpose Events). This causes
Linux virtual IRQ numbering to change.
However, it seems some CYAN Chromebooks, including Acer Chromebook
hardcodes these Linux IRQ numbers in the ACPI tables of the machine.
Since the numbering is different now, the IRQ meant for keyboard does
not match the Linux virtual IRQ number anymore making the keyboard
non-functional.
Work this around by adding special quirk just for these machines where
we add back all GPIOs to the irqdomain. Rest of the Cherryview/Braswell
based machines will not be affected by the change.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=194945 Fixes: 47c950d10202 ("pinctrl: cherryview: Do not add all southwest and north GPIOs to IRQ domain") Reported-by: Adam S Levy <theadamlevy@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Jiri Olsa [Tue, 11 Apr 2017 07:14:46 +0000 (09:14 +0200)]
x86/intel_rdt: Fix locking in rdtgroup_schemata_write()
The schemata lock is released before freeing the resource's temporary
tmp_cbms allocation. That's racy versus another write which allocates and
uses new temporary storage, resulting in memory leaks, freeing in use
memory, double a free or any combination of those.
Move the unlock after the release code.
Fixes: 60ec2440c63d ("x86/intel_rdt: Add schemata file") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Shaohua Li <shli@fb.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170411071446.15241-1-jolsa@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
CIFS: store results of cifs_reopen_file to avoid infinite wait
This fixes Continuous Availability when errors during
file reopen are encountered.
cifs_user_readv and cifs_user_writev would wait for ever if
results of cifs_reopen_file are not stored and for later inspection.
In fact, results are checked and, in case of errors, a chain
of function calls leading to reads and writes to be scheduled in
a separate thread is skipped.
These threads will wake up the corresponding waiters once reads
and writes are done.
However, given the return value is not stored, when rc is checked
for errors a previous one (always zero) is inspected instead.
This leads to pending reads/writes added to the list, making
cifs_user_readv and cifs_user_writev wait for ever.
Signed-off-by: Germano Percossi <germano.percossi@citrix.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <smfrench@gmail.com>
STATUS_BAD_NETWORK_NAME can be received during node failover,
causing the flag to be set and making the reconnect thread
always unsuccessful, thereafter.
Once the only place where it is set is removed, the remaining
bits are rendered moot.
Removing it does not prevent "mount" from failing when a non
existent share is passed.
What happens when the share really ceases to exist while the
share is mounted is undefined now as much as it was before.
Signed-off-by: Germano Percossi <germano.percossi@citrix.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <smfrench@gmail.com>
In case of error, smb2_reconnect_server reschedule itself
with a delay, to avoid being too aggressive.
Signed-off-by: Germano Percossi <germano.percossi@citrix.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <smfrench@gmail.com>
Mark Syms [Tue, 29 Nov 2016 11:36:46 +0000 (11:36 +0000)]
CIFS: handle guest access errors to Windows shares
Commit 1a967d6c9b39c226be1b45f13acd4d8a5ab3dc44 ("correctly to
anonymous authentication for the NTLM(v2) authentication") introduces
a regression in handling errors related to attempting a guest
connection to a Windows share which requires authentication. This
should result in a permission denied error but actually causes the
kernel module to enter a never-ending loop trying to follow a DFS
referal which doesn't exist.
The base cause of this is the failure now occurs later in the process
during tree connect and not at the session setup setup and all errors
in tree connect are interpreted as needing to follow the DFS paths
which isn't in this case correct. So, check the returned error against
EACCES and fail if this is returned error.
I've tested v3.10, v4.4, master, master+your patch using default options
(empty or no user "NU") and user=abc (U).
NT_LOGON_FAILURE in session setup: LF
This is what you seem to have in 3.10.
NT_ACCESS_DENIED in tree connect to the share: AD
This is what you get before your infinite loop.
| NU U
--------------------------------
3.10 | LF LF
4.4 | LF LF
master | AD LF
master+patch | AD LF
No infinite DFS loop :(
All these issues result in mount failing very fast with permission denied.
I guess it could be from either the Windows version or the share/folder
ACL. A deeper analysis of the packets might reveal more.
In any case I did not notice any issues for on a basic DFS setup with
the patch so I don't think it introduced any regressions, which is
probably all that matters. It still bothers me a little I couldn't hit
the bug.
I've included kernel output w/ debugging output and network capture of
my tests if anyone want to have a look at it. (master+patch = ml-guestfix).
Signed-off-by: Mark Syms <mark.syms@citrix.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Tested-by: Aurelien Aptel <aaptel@suse.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Mon, 10 Apr 2017 17:31:33 +0000 (10:31 -0700)]
CIFS: Fix null pointer deref during read resp processing
Currently during receiving a read response mid->resp_buf can be
NULL when it is being passed to cifs_discard_remaining_data() from
cifs_readv_discard(). Fix it by always passing server->smallbuf
instead and initializing mid->resp_buf at the end of read response
processing.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Acked-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
Ondrej Zary [Fri, 31 Mar 2017 18:35:42 +0000 (20:35 +0200)]
sata_via: Enable hotplug only on VT6421
Commit 57e5568fda27 ("sata_via: Implement hotplug for VT6421") adds
hotplug IRQ handler for VT6421 but enables hotplug on all chips. This
is a bug because it causes "irq xx: nobody cared" error on VT6420 when
hot-(un)plugging a drive:
Seems that VT6420 can do hotplug too (there's no documentation) but the
comments say that SCR register access (required for detecting hotplug
events) can cause problems on these chips.
For now, just keep hotplug disabled on anything other than VT6421.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tejun Heo <tj@kernel.org>
Zefan Li [Fri, 7 Apr 2017 08:51:55 +0000 (16:51 +0800)]
cgroup: avoid attaching a cgroup root to two different superblocks
Run this:
touch file0
for ((; ;))
{
mount -t cpuset xxx file0
}
And this concurrently:
touch file1
for ((; ;))
{
mount -t cpuset xxx file1
}
We'll trigger a warning like this:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 4675 at lib/percpu-refcount.c:317 percpu_ref_kill_and_confirm+0x92/0xb0
percpu_ref_kill_and_confirm called more than once on css_release!
CPU: 1 PID: 4675 Comm: mount Not tainted 4.11.0-rc5+ #5
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
Call Trace:
dump_stack+0x63/0x84
__warn+0xd1/0xf0
warn_slowpath_fmt+0x5f/0x80
percpu_ref_kill_and_confirm+0x92/0xb0
cgroup_kill_sb+0x95/0xb0
deactivate_locked_super+0x43/0x70
deactivate_super+0x46/0x60
...
---[ end trace a79f61c2a2633700 ]---
Here's a race:
Thread A Thread B
cgroup1_mount()
# alloc a new cgroup root
cgroup_setup_root()
cgroup1_mount()
# no sb yet, returns NULL
kernfs_pin_sb()
# but succeeds in getting the refcnt,
# so re-use cgroup root
percpu_ref_tryget_live()
# alloc sb with cgroup root
cgroup_do_mount()
cgroup_kill_sb()
# alloc another sb with same root
cgroup_do_mount()
cgroup_kill_sb()
We end up using the same cgroup root for two different superblocks,
so percpu_ref_kill() will be called twice on the same root when the
two superblocks are destroyed.
We should fix to make sure the superblock pinning is really successful.
projects / mirror_ubuntu-eoan-kernel.git / log