This is a temp patch, there was some refactor in the dml part of the code.
which is not in this branch. for now this is good, we can implement this
properly once we have an updated branch.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Tue, 28 May 2019 05:27:11 +0000 (13:27 +0800)]
drm/amdgpu/gfx10: fix programming of SC_HIZ_TILE_FIFO_SIZE field
max fifo size is 128 and PA_SC_FIFO_SIZE[20:15]=SC_HIZ_TILE_FIFO_SIZE
field is programmed in units of two entries, but 6 bits is insufficient
to hold value 128/2 = 64, so set this field as 0 which is interpreted by
the hardware as maximum physical fifo size(128).
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jack Xiao <Jack.Xiao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hersen wu [Wed, 26 Jun 2019 17:06:07 +0000 (13:06 -0400)]
drm/amd/display: init res_pool dccg_ref, dchub_ref with xtalin_freq
[WHY] dc sw clock implementation of navi10 and raven are not exact the
same. dcccg, dchub reference clock initialization is done after dc calls
vbios dispcontroller_init table. for raven family, before
dispcontroller_init is called by dc, the ref clk values are referred
by sw clock implementation and program asic register using wrong
values. this causes dchub pstate error. This need provide valid ref
clk values. for navi10, since dispcontroller_init is not called,
dchubbub_global_timer_enable = 0, hubbub2_get_dchub_ref_freq will
hit aeert. this need remove hubbub2_get_dchub_ref_freq from this
location and move to dcn20_init_hw.
[HOW] for all asic, initialize dccg, dchub ref clk with data from
vbios firmware table by default. for raven asic family, use these data
from vbios, for asic which support sw dccg component, like navi10,
read ref clk by sw dccg functions and update the ref clk.
Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Force uclk to max for every state
Workaround for now to avoid underflow.
The uclk switch time should really be bumped up to 404, but doing so
would expose p-state hang issues for higher bandwidth display
configurations.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we shut down a process without having destroyed its GWS-using
queues, it is possible that GWS BO will still be in the process
BO list during the gpuvm destruction. This list should be empty
at that time, so we should remove the GWS allocation at the
process uninit point if it is still around.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Tue, 16 Jul 2019 11:23:22 +0000 (07:23 -0400)]
drm/amd/amdgpu: Fix offset for vmid selection in debugfs interface
The register debugfs interface was using the wrong bitmask for vmid
selection for GFX_CNTL.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 11 Jul 2019 07:13:17 +0000 (15:13 +0800)]
drm/amd/powerplay: correct smu_update_table usage
The interface was used in a confusing way. In profile mode scenario,
the 2nd parameter of the interface was used in a different way from
other scenarios.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Sat, 13 Jul 2019 06:27:34 +0000 (02:27 -0400)]
drm/amdgpu: Fix silent amdgpu_bo_move failures
Under memory pressure, buffer moves between RAM to VRAM can
fail when there is no GTT space available. In those cases
amdgpu_bo_move falls back to ttm_bo_move_memcpy, which seems to
succeed, although it doesn't really support non-contiguous or
invisible VRAM. This manifests as VM faults with corrupted page
table entries in KFD eviction stress tests.
Print some helpful messages when lack of GTT space is causing buffer
moves to fail. Check that source and destination memory regions are
supported by ttm_bo_move_memcpy before taking that fallback.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 16 Jul 2019 14:28:41 +0000 (09:28 -0500)]
drm/amdgpu: drop dead header
Not used anymore.
Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Noticed-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/powerplay: Use proper enums in vega20_print_clk_levels
clang warns:
drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:995:39: warning:
implicit conversion from enumeration type 'PPCLK_e' to different
enumeration type 'enum smu_clk_type' [-Wenum-conversion]
ret = smu_get_current_clk_freq(smu, PPCLK_SOCCLK, &now);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:1016:39: warning:
implicit conversion from enumeration type 'PPCLK_e' to different
enumeration type 'enum smu_clk_type' [-Wenum-conversion]
ret = smu_get_current_clk_freq(smu, PPCLK_FCLK, &now);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:1031:39: warning:
implicit conversion from enumeration type 'PPCLK_e' to different
enumeration type 'enum smu_clk_type' [-Wenum-conversion]
ret = smu_get_current_clk_freq(smu, PPCLK_DCEFCLK, &now);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
The values are mapped one to one in vega20_get_smu_clk_index so just use
the proper enums here.
Fixes: 096761014227 ("drm/amd/powerplay: support sysfs to get socclk, fclk, dcefclk") Link: https://github.com/ClangBuiltLinux/linux/issues/587 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu/gfx10: set SH_MEM_CONFIG.INITIAL_INST_PREFETCH
Prefetch mode 0 is not supported and can lead to hangs with certain very
specific code patterns. Set a sound prefetch mode for all VMIDs rather
than forcing all shaders to set the prefetch mode at the beginning.
Reduce code duplication a bit while we're at it. Note that the 64-bit
address mode enum and the retry all enum are both 0, so the only
functional change is in the INITIAL_INST_PREFETCH field.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/powerplay: enable fw ctf,apcc dfll and gfx ss
enable fw ctf, apcc dfll and gfx ss on navi10.
fw ctf: when the fw ctf is triggered, the gfx and soc power domain
are shut down. fan speed is boosted to the maximum.
gfx ss: hardware feature, sanity check has been done.
apcc dfll: can check the scoreboard in smu fw to confirm if it's enabled.
no need to do further check since the gfx hardware control the frequency once
a pcc signal comes.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: check kdb_bin_size to exclude kdb loading sequence
The legacy navi10 sos binary will not carry on kdb image. the kdb_start_addr
is actually the start address of sys_drv image and shouldn't be sent to psp
bootloader.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Sat, 13 Jul 2019 06:35:37 +0000 (02:35 -0400)]
drm/amdgpu: Fix unaligned memory copies
When starting a new mm_node, the page_offset becomes 0.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wang Xiayang [Mon, 15 Jul 2019 08:53:01 +0000 (16:53 +0800)]
drm/amdgpu: replace simple_strtol() by kstrtou32()
The simple_strtol() function is deprecated. kstrto[l,u32]() is
the correct replacement as it can properly handle overflows.
This patch replaces the deprecated simple_strtol() use introduced recently.
As clk is of type uint32_t, we are safe to use kstrtou32().
It is also safe to return zero on string parsing error,
similar to the case of returning zero if buf is empty in parse_clk().
Fixes: bb5a2bdf36a8 ("drm/amdgpu: support dpm level modification under virtualization v3") Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/amdgpu: hide #warning for missing DC config
It is annoying to have #warnings that trigger in randconfig
builds like
drivers/gpu/drm/amd/amdgpu/soc15.c:653:3: error: "Enable CONFIG_DRM_AMD_DC for display support on SOC15."
drivers/gpu/drm/amd/amdgpu/nv.c:400:3: error: "Enable CONFIG_DRM_AMD_DC for display support on navi."
Remove these and rely on the users to turn these on.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Mon, 15 Jul 2019 12:53:06 +0000 (08:53 -0400)]
drm/amdgpu: Fix Vega20 Perf counter for pcie_bw
The perf counter for Vega20 is 108, instead of 104 which it was on all
previous GPUs, so add a check to use the appropriate value.
Signed-off-by: Kent Russell <kent.russell@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Fri, 12 Jul 2019 13:41:32 +0000 (09:41 -0400)]
drm/amd/amdgpu: Add missing select_me_pipe_q() for gfx10
The ability to select GFX GRBM me/pipe/queue/vmid was missing from
the gfx10 driver. This patch adds it. Used by the debugfs register
interface to select GFX resources when read/writing registers.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Fri, 12 Jul 2019 13:27:06 +0000 (09:27 -0400)]
drm/amd/amdgpu: Add VMID to SRBM debugfs bank selection
Add 5 bits to the offset for SRBM selection to handle VMIDs. Also
update the select_me_pipe_q() callback to also select VMID.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the AMDGPU_CTX_PRIORITY_* defines are used in both
drm_amdgpu_ctx_in::priority and drm_amdgpu_sched_in::priority.
Extend the comment to mention the CAP_SYS_NICE or DRM_MASTER requirement
is only applicable with the former.
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 12 Jul 2019 09:05:52 +0000 (17:05 +0800)]
drm/amd/powerplay: fix save dpm level error for smu
the save dpm level should be save previous dpm profile level,
should not modified by get dpm level function.
eg: default auto
1. auto -> standard ==> dpm_level = standard, save_dpm = auto.
2. standard -> auto ==> dpm_level = auto, save_dpm = standard.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Fri, 21 Jun 2019 23:50:03 +0000 (19:50 -0400)]
drm/amdkfd: Consistently apply noretry setting
Apply the same setting to SH_MEM_CONFIG and VM_CONTEXT1_CNTL. This
makes the noretry param no longer KFD-specific. On GFX10 I'm not
changing SH_MEM_CONFIG in this commit because GFX10 has different
retry behaviour in the SQ and I don't have a way to test it at the
moment.
Suggested-by: Christian König <Christian.Koenig@amd.com> CC: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by : Shaoyun.liu < Shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: return 'NULL' instead of 'false' from dcn20_acquire_idle_pipe_for_layer
clang complains that 'false' is a not a pointer:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.c:2428:10: error: expression which evaluates to zero treated as a null pointer constant of type 'struct pipe_ctx *' [-Werror,-Wnon-literal-null-conversion]
return false;
Changing it to 'NULL' looks like the right thing that will shut up
the warning and make it easier to read, while not changing behavior.
drm/amd/display: Support clang option for stack alignment
As previously fixed for dml in commit 4769278e5c7f ("amdgpu/dc/dml:
Support clang option for stack alignment") and calcs in commit cc32ad8f559c ("amdgpu/dc/calcs: Support clang option for stack
alignment"), dcn20 uses an option that is not available with clang:
Kevin Wang [Thu, 11 Jul 2019 13:33:17 +0000 (21:33 +0800)]
drm/amd/powerplay: fix smu clock type change miss error
in the smu module, use the smu_xxxclk type to identify the CLK type
use SMU_SCLK, SMU_MCLK to replace PP_SCLK, PP_MCLK.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add drm_audio_component support to amdgpu_dm
[Why]
The drm_audio_component can be used to give pin ELD notifications
directly to the sound driver. This fixes audio endpoints disappearing
due to missing unsolicited notifications.
[How]
Send the notification via the audio component whenever we enable or
disable audio state on a stream. This matches what i915 does with
their drm_audio_component and what Takashi Iwai's proposed hack for
radeon/amdpgu did.
This is a bit delayed in when the notification actually occurs, however.
We wait until after all the programming is complete rather than sending
the notification mid sequence.
Particular care is needed for the get ELD callback since it can happen
outside the locking and fencing DRM does for atomic commits.
Cc: Leo Li <sunpeng.li@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In order to give pin notifications to the sound driver from DM we need
to know whether audio is enabled on a stream and what pin it's using
from DC.
[How]
Expose the instance via stream status if it's a mapped resource for
the stream. It will be -1 if there's no audio mapped.
Cc: Leo Li <sunpeng.li@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Tue, 9 Jul 2019 19:33:53 +0000 (15:33 -0400)]
drm/amdkfd: fix cp hang in eviction
The cp hang occurs in OCL conformance test only on supermicro
platform which has 40 cores and the test generates 40 threads.
The root cause is race condition in non-protected flags.
The fix is to add flags of is_evicted and is_active(init_mqd())
into protected area.
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 3 Jul 2019 01:21:37 +0000 (09:21 +0800)]
drm/amd/powerplay: increase the SMU msg response waiting time
This is expected to fix some mode1 reset failures. And this
affects SMU part only as the timeout setting for other parts
is controlled by a different macro.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Tue, 9 Jul 2019 23:31:21 +0000 (19:31 -0400)]
drm/amdgpu: Fix potential integer overflows
With mm_nodes larger than 4GB, byte_count in amdgpu_fill_buffer would
overflow.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Fri, 28 Jun 2019 22:31:26 +0000 (18:31 -0400)]
drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback
This RELEASE_MEM use has the Release semantic, which means we should write
back but not invalidate. Invalidations only make sense with the Acquire
semantic (ACQUIRE_MEM), or when RELEASE_MEM is used to do the combined
Acquire-Release semantic, which is a barrier, not a fence.
The undesirable side effect of doing invalidations for the Release semantic
is that it invalidates caches while shaders are running, because the Release
can execute in the middle of the next IB.
UMDs should use ACQUIRE_MEM at the beginning of IBs. Doing cache
invalidations for a fence (like in this case) doesn't do anything
for correctness.
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change the two recently introduced instances to a multiply+shift
operation that is also much cheaper on 32-bit architectures.
We can do that here, since both of them are really 32-bit numbers
that change a few percent.
Fixes: bedbbe6af4be ("drm/amd/display: Move link functions from dc to dc_link") Fixes: f18bc4e53ad6 ("drm/amd/display: update calculated bounding box logic for NV") Acked-by: Slava Abramov <slava.abramov@amd.com> Tested-by: Slava Abramov <slava.abramov@amd.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 5 Jul 2019 20:39:39 +0000 (15:39 -0500)]
drm/amdgpu: properly guard DC support in navi code
Need to add appropriate ifdef.
Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Without this header, we get a compiler error in some configurations:
.../dc/dcn20/dcn20_hwseq.c: In function 'dcn20_hwss_wait_for_blank_complete':
.../dc/dcn20/dcn20_hwseq.c:1493:3: error: implicit declaration of function 'udelay' [-Werror=implicit-function-declaration]
Note: the use of udelay itself may be problematic, as can occupy
the CPU for 200ms in a busy-loop here.
Fixes: 7ed4e6352c16 ("drm/amd/display: Add DCN2 HW Sequencer and Resource") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When CONFIG_PERF_EVENTS is disabled, we cannot compile the pmu
portion of the amdgpu driver:
drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:48:38: error: no member named 'hw' in 'struct perf_event'
struct hw_perf_event *hwc = &event->hw;
~~~~~ ^
drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:51:13: error: no member named 'attr' in 'struct perf_event'
if (event->attr.type != event->pmu->type)
~~~~~ ^
...
projects / mirror_ubuntu-kernels.git / log