ext4: fix potential infinite loop in ext4_dx_readdir()
When ext4_htree_fill_tree() fails, ext4_dx_readdir() can run into an
infinite loop since if info->last_pos != ctx->pos this will reset the
directory scan and reread the failing entry. For example:
1. a dx_dir which has 3 block, block 0 as dx_root block, block 1/2 as
leaf block which own the ext4_dir_entry_2
2. block 1 read ok and call_filldir which will fill the dirent and update
the ctx->pos
3. block 2 read fail, but we has already fill some dirent, so we will
return back to userspace will a positive return val(see ksys_getdents64)
4. the second ext4_dx_readdir will reset the world since info->last_pos
!= ctx->pos, and will also init the curr_hash which pos to block 1
5. So we will read block1 too, and once block2 still read fail, we can
only fill one dirent because the hash of the entry in block1(besides
the last one) won't greater than curr_hash
6. this time, we forget update last_pos too since the read for block2
will fail, and since we has got the one entry, ksys_getdents64 can
return success
7. Latter we will trapped in a loop with step 4~6
ext4: flush s_error_work before journal destroy in ext4_fill_super
The error path in ext4_fill_super forget to flush s_error_work before
journal destroy, and it may trigger the follow bug since
flush_stashed_error_work can run concurrently with journal destroy
without any protection for sbi->s_journal.
static int start_this_handle(...)
BUG_ON(journal->j_flags & JBD2_UNMOUNT); <---- Trigger this
Besides, after we enable fast commit, ext4_fc_replay can add work to
s_error_work but return success, so the latter journal destroy in
ext4_load_journal can trigger this problem too.
Fix this problem with two steps:
1. Call ext4_commit_super directly in ext4_handle_error for the case
that called from ext4_fc_replay
2. Since it's hard to pair the init and flush for s_error_work, we'd
better add a extras flush_work before journal destroy in
ext4_fill_super
Besides, this patch will call ext4_commit_super in ext4_handle_error for
any nojournal case too. But it seems safe since the reason we call
schedule_work was that we should save error info to sb through journal
if available. Conversely, for the nojournal case, it seems useless delay
commit superblock to s_error_work.
Fixes: c92dc856848f ("ext4: defer saving error info from atomic context") Fixes: 2d01ddc86606 ("ext4: save error info to sb through journal if available") Cc: stable@kernel.org Signed-off-by: yangerkun <yangerkun@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210924093917.1953239-1-yangerkun@huawei.com
Ritesh Harjani [Sat, 5 Jun 2021 05:09:32 +0000 (10:39 +0530)]
ext4: fix loff_t overflow in ext4_max_bitmap_size()
We should use unsigned long long rather than loff_t to avoid
overflow in ext4_max_bitmap_size() for comparison before returning.
w/o this patch sbi->s_bitmap_maxbytes was becoming a negative
value due to overflow of upper_limit (with has_huge_files as true)
Below is a quick test to trigger it on a 64KB pagesize system.
sudo mkfs.ext4 -b 65536 -O ^has_extents,^64bit /dev/loop2
sudo mount /dev/loop2 /mnt
sudo echo "hello" > /mnt/hello -> This will error out with
"echo: write error: File too large"
Jeffle Xu [Mon, 23 Aug 2021 06:13:58 +0000 (14:13 +0800)]
ext4: fix reserved space counter leakage
When ext4_insert_delayed block receives and recovers from an error from
ext4_es_insert_delayed_block(), e.g., ENOMEM, it does not release the
space it has reserved for that block insertion as it should. One effect
of this bug is that s_dirtyclusters_counter is not decremented and
remains incorrectly elevated until the file system has been unmounted.
This can result in premature ENOSPC returns and apparent loss of free
space.
Another effect of this bug is that
/sys/fs/ext4/<dev>/delayed_allocation_blocks can remain non-zero even
after syncfs has been executed on the filesystem.
Besides, add check for s_dirtyclusters_counter when inode is going to be
evicted and freed. s_dirtyclusters_counter can still keep non-zero until
inode is written back in .evict_inode(), and thus the check is delayed
to .destroy_inode().
Fixes: 51865fda28e5 ("ext4: let ext4 maintain extent status tree") Cc: stable@kernel.org Suggested-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com> Reviewed-by: Eric Whitney <enwlinux@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210823061358.84473-1-jefflexu@linux.alibaba.com
Hou Tao [Fri, 20 Aug 2021 04:45:05 +0000 (12:45 +0800)]
ext4: limit the number of blocks in one ADD_RANGE TLV
Now EXT4_FC_TAG_ADD_RANGE uses ext4_extent to track the
newly-added blocks, but the limit on the max value of
ee_len field is ignored, and it can lead to BUG_ON as
shown below when running command "fallocate -l 128M file"
on a fast_commit-enabled fs:
Eric Whitney [Thu, 19 Aug 2021 14:49:27 +0000 (10:49 -0400)]
ext4: enforce buffer head state assertion in ext4_da_map_blocks
Remove the code that re-initializes a buffer head with an invalid block
number and BH_New and BH_Delay bits when a matching delayed and
unwritten block has been found in the extent status cache. Replace it
with assertions that verify the buffer head already has this state
correctly set. The current code masked an inline data truncation bug
that left stale entries in the extent status cache. With this change,
generic/130 can be used to reproduce and detect that bug.
Eric Whitney [Thu, 19 Aug 2021 14:49:26 +0000 (10:49 -0400)]
ext4: remove extent cache entries when truncating inline data
Conditionally remove all cached extents belonging to an inode
when truncating its inline data. It's only necessary to attempt to
remove cached extents when a conversion from inline to extent storage
has been initiated (!EXT4_STATE_MAY_INLINE_DATA). This avoids
unnecessary es lock overhead in the more common inline case.
Fix a bug in how we update i_disksize, and the error path in
inline_data_end. Finally, drop an unnecessary creation of a journal
handle which was only needed for inline data, which can give us a
large performance gain in delayed allocation writes.
Zhang Yi [Fri, 16 Jul 2021 12:20:24 +0000 (20:20 +0800)]
ext4: drop unnecessary journal handle in delalloc write
After we factor out the inline data write procedure from
ext4_da_write_end(), we don't need to start journal handle for the cases
of both buffer overwrite and append-write. If we need to update
i_disksize, mark_inode_dirty() do start handle and update inode buffer.
So we could just remove all the journal handle codes in the delalloc
write procedure.
After this patch, we could get a lot of performance improvement. Below
is the Unixbench comparison data test on my machine with 'Intel Xeon
Gold 5120' CPU and nvme SSD backend.
Test cmd:
./Run -c 56 -i 3 fstime fsbuffer fsdisk
Before this patch:
System Benchmarks Partial Index BASELINE RESULT INDEX
File Copy 1024 bufsize 2000 maxblocks 3960.0 422965.0 1068.1
File Copy 256 bufsize 500 maxblocks 1655.0 105077.0 634.9
File Copy 4096 bufsize 8000 maxblocks 5800.0 1429092.0 2464.0
======
System Benchmarks Index Score (Partial Only) 1186.6
After this patch:
System Benchmarks Partial Index BASELINE RESULT INDEX
File Copy 1024 bufsize 2000 maxblocks 3960.0 732716.0 1850.3
File Copy 256 bufsize 500 maxblocks 1655.0 184940.0 1117.5
File Copy 4096 bufsize 8000 maxblocks 5800.0 2427152.0 4184.7
======
System Benchmarks Index Score (Partial Only) 2053.0
Zhang Yi [Fri, 16 Jul 2021 12:20:23 +0000 (20:20 +0800)]
ext4: factor out write end code of inline file
Now that the inline_data file write end procedure are falled into the
common write end functions, it is not clear. Factor them out and do
some cleanup. This patch also drop ext4_da_write_inline_data_end()
and switch to use ext4_write_inline_data_end() instead because we also
need to do the same error processing if we failed to write data into
inline entry.
Zhang Yi [Fri, 16 Jul 2021 12:20:22 +0000 (20:20 +0800)]
ext4: correct the error path of ext4_write_inline_data_end()
Current error path of ext4_write_inline_data_end() is not correct.
Firstly, it should pass out the error value if ext4_get_inode_loc()
return fail, or else it could trigger infinite loop if we inject error
here. And then it's better to add inode to orphan list if it return fail
in ext4_journal_stop(), otherwise we could not restore inline xattr
entry after power failure. Finally, we need to reset the 'ret' value if
ext4_write_inline_data_end() return success in ext4_write_end() and
ext4_journalled_write_end(), otherwise we could not get the error return
value of ext4_journal_stop().
Zhang Yi [Fri, 16 Jul 2021 12:20:21 +0000 (20:20 +0800)]
ext4: check and update i_disksize properly
After commit 3da40c7b0898 ("ext4: only call ext4_truncate when size <=
isize"), i_disksize could always be updated to i_size in ext4_setattr(),
and we could sure that i_disksize <= i_size since holding inode lock and
if i_disksize < i_size there are delalloc writes pending in the range
upto i_size. If the end of the current write is <= i_size, there's no
need to touch i_disksize since writeback will push i_disksize upto
i_size eventually. So we can switch to check i_size instead of
i_disksize in ext4_da_write_end() when write to the end of the file.
we also could remove ext4_mark_inode_dirty() together because we defer
inode dirtying to generic_write_end() or ext4_da_write_inline_data_end().
ext4: add error checking to ext4_ext_replay_set_iblocks()
If the call to ext4_map_blocks() fails due to an corrupted file
system, ext4_ext_replay_set_iblocks() can get stuck in an infinite
loop. This could be reproduced by running generic/526 with a file
system that has inline_data and fast_commit enabled. The system will
repeatedly log to the console:
EXT4-fs warning (device dm-3): ext4_block_to_path:105: block 1074800922 > max in inode 131076
With this patch, generic/526 still fails, but system is no longer
locking up in a tight loop. It's likely the root casue is that
fast_commit replay is corrupting file systems with inline_data, and we
probably need to add better error handling in the fast commit replay
code path beyond what is done here, which essentially just breaks the
infinite loop without reporting the to the higher levels of the code.
Zhang Yi [Thu, 26 Aug 2021 13:04:09 +0000 (21:04 +0800)]
ext4: make the updating inode data procedure atomic
Now that ext4_do_update_inode() return error before filling the whole
inode data if we fail to set inode blocks in ext4_inode_blocks_set().
This error should never happen in theory since sb->s_maxbytes should not
have allowed this, we have already init sb->s_maxbytes according to this
feature in ext4_fill_super(). So even through that could only happen due
to the filesystem corruption, we'd better to return after we finish
updating the inode because it may left an uninitialized buffer and we
could read this buffer later in "errors=continue" mode.
This patch make the updating inode data procedure atomic, call
EXT4_ERROR_INODE() after we dropping i_raw_lock after something bad
happened, make sure that the inode is integrated, and also drop a BUG_ON
and do some small cleanups.
Zhang Yi [Thu, 26 Aug 2021 13:04:08 +0000 (21:04 +0800)]
ext4: remove an unnecessary if statement in __ext4_get_inode_loc()
The "if (!buffer_uptodate(bh))" hunk covered almost the whole code after
getting buffer in __ext4_get_inode_loc() which seems unnecessary, remove
it and switch to check ext4_buffer_uptodate(), it simplify code and make
it more readable.
No EIO simulation is required if the buffer is uptodate, so move the
simulation behind read bio completeion just like inode/block bitmap
simulation does.
Jan Kara [Mon, 16 Aug 2021 09:57:08 +0000 (11:57 +0200)]
ext4: Improve scalability of ext4 orphan file handling
Even though the length of the critical section when adding / removing
orphaned inodes was significantly reduced by using orphan file, the
contention of lock protecting orphan file still appears high in profiles
for truncate / unlink intensive workloads with high number of threads.
This patch makes handling of orphan file completely lockless. Also to
reduce conflicts between CPUs different CPUs start searching for empty
slot in orphan file in different blocks.
Performance comparison of locked orphan file handling, lockless orphan
file handling, and completely disabled orphan inode handling
from 80 CPU Xeon Server with 526 GB of RAM, filesystem located on
SAS SSD disk, average of 5 runs:
stress-orphan (microbenchmark truncating files byte-by-byte from N
processes in parallel)
So we can see that with lockless orphan file handling, addition /
deletion of orphaned inodes got almost completely out of picture even
for a microbenchmark stressing it.
For reaim creat_clo workload on ramdisk there are also noticeable gains
(average of 5 runs):
Jan Kara [Mon, 16 Aug 2021 09:57:06 +0000 (11:57 +0200)]
ext4: Speedup ext4 orphan inode handling
Ext4 orphan inode handling is a bottleneck for workloads which heavily
truncate / unlink small files since it contends on the global
s_orphan_mutex lock (and generally it's difficult to improve scalability
of the ondisk linked list of orphaned inodes).
This patch implements new way of handling orphan inodes. Instead of
linking orphaned inode into a linked list, we store it's inode number in
a new special file which we call "orphan file". Only if there's no more
space in the orphan file (too many inodes are currently orphaned) we
fall back to using old style linked list. Currently we protect
operations in the orphan file with a spinlock for simplicity but even in
this setting we can substantially reduce the length of the critical
section and thus speedup some workloads. In the next patch we improve
this by making orphan handling lockless.
Note that the change is backwards compatible when the filesystem is
clean - the existence of the orphan file is a compat feature, we set
another ro-compat feature indicating orphan file needs scanning for
orphaned inodes when mounting filesystem read-write. This ro-compat
feature gets cleared on unmount / remount read-only.
Some performance data from 80 CPU Xeon Server with 512 GB of RAM,
filesystem located on SSD, average of 5 runs:
stress-orphan (microbenchmark truncating files byte-by-byte from N
processes in parallel)
Jan Kara [Mon, 16 Aug 2021 09:57:05 +0000 (11:57 +0200)]
ext4: Move orphan inode handling into a separate file
Move functions for handling orphan inodes into a new file
fs/ext4/orphan.c to have them in one place and somewhat reduce size of
other files. No code changes.
Jan Kara [Mon, 16 Aug 2021 09:57:04 +0000 (11:57 +0200)]
ext4: Support for checksumming from journal triggers
JBD2 layer support triggers which are called when journaling layer moves
buffer to a certain state. We can use the frozen trigger, which gets
called when buffer data is frozen and about to be written out to the
journal, to compute block checksums for some buffer types (similarly as
does ocfs2). This avoids unnecessary repeated recomputation of the
checksum (at the cost of larger window where memory corruption won't be
caught by checksumming) and is even necessary when there are
unsynchronized updaters of the checksummed data.
So add superblock and journal trigger type arguments to
ext4_journal_get_write_access() and ext4_journal_get_create_access() so
that frozen triggers can be set accordingly. Also add inode argument to
ext4_walk_page_buffers() and all the callbacks used with that function
for the same purpose. This patch is mostly only a change of prototype of
the above mentioned functions and a few small helpers. Real checksumming
will come later.
Theodore Ts'o [Sat, 21 Aug 2021 03:44:17 +0000 (23:44 -0400)]
ext4: fix race writing to an inline_data file while its xattrs are changing
The location of the system.data extended attribute can change whenever
xattr_sem is not taken. So we need to recalculate the i_inline_off
field since it mgiht have changed between ext4_write_begin() and
ext4_write_end().
This means that caching i_inline_off is probably not helpful, so in
the long run we should probably get rid of it and shrink the in-memory
ext4 inode slightly, but let's fix the race the simple way for now.
Cc: stable@kernel.org Fixes: f19d5870cbf72 ("ext4: add normal write support for inline data") Reported-by: syzbot+13146364637c7363a7de@syzkaller.appspotmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Thu, 12 Aug 2021 13:31:22 +0000 (15:31 +0200)]
ext4: Make sure quota files are not grabbed accidentally
If ext4 filesystem is corrupted so that quota files are linked from
directory hirerarchy, bad things can happen. E.g. quota files can get
corrupted or deleted. Make sure we are not grabbing quota file inodes
when we expect normal inodes.
Jan Kara [Thu, 12 Aug 2021 12:47:37 +0000 (14:47 +0200)]
ext4: fix e2fsprogs checksum failure for mounted filesystem
Commit 81414b4dd48 ("ext4: remove redundant sb checksum
recomputation") removed checksum recalculation after updating
superblock free space / inode counters in ext4_fill_super() based on
the fact that we will recalculate the checksum on superblock
writeout.
That is correct assumption but until the writeout happens (which can
take a long time) the checksum is incorrect in the buffer cache and if
programs such as tune2fs or resize2fs is called shortly after a file
system is mounted can fail. So return back the checksum recalculation
and add a comment explaining why.
Theodore Ts'o [Fri, 13 Aug 2021 15:20:48 +0000 (11:20 -0400)]
ext4: if zeroout fails fall back to splitting the extent node
If the underlying storage device is using thin-provisioning, it's
possible for a zeroout operation to return ENOSPC.
Commit df22291ff0fd ("ext4: Retry block allocation if we have free blocks
left") added logic to retry block allocation since we might get free block
after we commit a transaction. But the ENOSPC from thin-provisioning
will confuse ext4, and lead to an infinite loop.
Since using zeroout instead of splitting the extent node is an
optimization, if it fails, we might as well fall back to splitting the
extent node.
Wang Jianchao [Mon, 30 Aug 2021 07:52:46 +0000 (15:52 +0800)]
ext4: flush background discard kwork when retry allocation
The background discard kwork tries to mark blocks used and issue
discard. This can make filesystem suffer from NOSPC error, xfstest
generic/371 can fail due to it. Fix it by flushing discard kwork
in ext4_should_retry_alloc. At the same time, give up discard at
the moment.
Wang Jianchao [Sat, 24 Jul 2021 07:41:23 +0000 (15:41 +0800)]
ext4: get discard out of jbd2 commit kthread contex
Right now, discard is issued and waited to be completed in jbd2
commit kthread context after the logs are committed. When large
amount of files are deleted and discard is flooding, jbd2 commit
kthread can be blocked for long time. Then all of the metadata
operations can be blocked to wait the log space.
One case is the page fault path with read mm->mmap_sem held, which
wants to update the file time but has to wait for the log space.
When other threads in the task wants to do mmap, then write mmap_sem
is blocked. Finally all of the following read mmap_sem requirements
are blocked, even the ps command which need to read the /proc/pid/
-cmdline. Our monitor service which needs to read /proc/pid/cmdline
used to be blocked for 5 mins.
This patch frees the blocks back to buddy after commit and then do
discard in a async kworker context in fstrim fashion, namely,
- mark blocks to be discarded as used if they have not been allocated
- do discard
- mark them free
After this, jbd2 commit kthread won't be blocked any more by discard
and we won't get NOSPC even if the discard is slow or throttled.
Wang Jianchao [Sat, 24 Jul 2021 07:41:21 +0000 (15:41 +0800)]
ext4: add new helper interface ext4_try_to_trim_range()
There is no functional change in this patch but just split the
codes, which serachs free block and does trim, into a new function
ext4_try_to_trim_range. This is preparing for the following async
backgroup discard.
Theodore Ts'o [Mon, 3 May 2021 19:37:33 +0000 (15:37 -0400)]
jbd2: fix portability problems caused by unaligned accesses
This commit applies the e2fsck/recovery.c portions of commit 1e0c8ca7c08a ("e2fsck: fix portability problems caused by unaligned
accesses) from the e2fsprogs git tree.
The on-disk format for the ext4 journal can have unaigned 32-bit
integers. This can happen when replaying a journal using a obsolete
checksum format (which was never popularly used, since the v3 format
replaced v2 while the metadata checksum feature was being stablized).
Theodore Ts'o [Wed, 4 Aug 2021 18:23:55 +0000 (14:23 -0400)]
ext4: fix potential htree corruption when growing large_dir directories
Commit b5776e7524af ("ext4: fix potential htree index checksum
corruption) removed a required restart when multiple levels of index
nodes need to be split. Fix this to avoid directory htree corruptions
when using the large_dir feature.
Merge tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs
are offlined.
- Fix 'perf test' problems related to the recently added hybrid
(BIG/little) code.
- Split ARM's coresight (hw tracing) decode by aux records to avoid
fatal decoding errors.
- Fix add event failure in 'perf probe' when running 32-bit perf in a
64-bit kernel.
- Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set.
- Fix memory and refcount leaks detected by ASAn when running 'perf
test', should be clean of warnings now.
- Remove broken definition of __LITTLE_ENDIAN from tools'
linux/kconfig.h, which was breaking the build in some systems.
- Cast PTHREAD_STACK_MIN to int as it may turn into 'long
sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some
systems.
- Fix libperf build error with LIBPFM4=1.
- Sync UAPI files changed by the memfd_secret new syscall.
* tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits)
perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set
perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel
perf data: Close all files in close_dir()
perf probe-file: Delete namelist in del_events() on the error path
perf test bpf: Free obj_buf
perf trace: Free strings in trace__parse_events_option()
perf trace: Free syscall tp fields in evsel->priv
perf trace: Free syscall->arg_fmt
perf trace: Free malloc'd trace fields on exit
perf lzma: Close lzma stream on exit
perf script: Fix memory 'threads' and 'cpus' leaks on exit
perf script: Release zstd data
perf session: Cleanup trace_event
perf inject: Close inject.output on exit
perf report: Free generated help strings for sort option
perf env: Fix memory leak of cpu_pmu_caps
perf test maps__merge_in: Fix memory leak of maps
perf dso: Fix memory leak in dso__new_map()
perf test event_update: Fix memory leak of unit
perf test event_update: Fix memory leak of evlist
...
Merge tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"A few fixes for issues in the new online shrink code, additional
corrections for my recent bug-hunt w.r.t. extent size hints on
realtime, and improved input checking of the GROWFSRT ioctl.
IOW, the usual 'I somehow got bored during the merge window and
resumed auditing the farther reaches of xfs':
- Fix shrink eligibility checking when sparse inode clusters enabled
- Reset '..' directory entries when unlinking directories to prevent
verifier errors if fs is shrinked later
- Don't report unusable extent size hints to FSGETXATTR
- Don't warn when extent size hints are unusable because the sysadmin
configured them that way
- Fix insufficient parameter validation in GROWFSRT ioctl
- Fix integer overflow when adding rt volumes to filesystem"
* tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: detect misaligned rtinherit directory extent size hints
xfs: fix an integer overflow error in xfs_growfs_rt
xfs: improve FSGROWFSRT precondition checking
xfs: don't expose misaligned extszinherit hints to userspace
xfs: correct the narrative around misaligned rtinherit/extszinherit dirs
xfs: reset child dir '..' entry when unlinking child
xfs: check for sparse inode clusters that cross new EOAG when shrinking
Merge tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fixes from Darrick Wong:
"A handful of bugfixes for the iomap code.
There's nothing especially exciting here, just fixes for UBSAN (not
KASAN as I erroneously wrote in the tag message) warnings about
undefined behavior in the SEEK_DATA/SEEK_HOLE code, and some
reshuffling of per-page block state info to fix some problems with
gfs2.
- Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE
- Fix assertion errors when using inlinedata files on gfs2"
* tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Don't create iomap_page objects in iomap_page_mkwrite_actor
iomap: Don't create iomap_page objects for inline files
iomap: Permit pages without an iop to enter writeback
iomap: remove the length variable in iomap_seek_hole
iomap: remove the length variable in iomap_seek_data
Merge tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Restore the original behavior of scripts/setlocalversion when
LOCALVERSION is set to empty.
- Show Kconfig prompts even for 'make -s'
- Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y
for older GNU Make versions
* tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation: Fix intiramfs script name
Kbuild: lto: fix module versionings mismatch in GNU make 3.X
kbuild: do not suppress Kconfig prompts for silent build
scripts/setlocalversion: fix a bug when LOCALVERSION is empty
Robert Richter [Thu, 15 Jul 2021 09:26:02 +0000 (11:26 +0200)]
Documentation: Fix intiramfs script name
Documentation was not changed when renaming the script in commit 80e715a06c2d ("initramfs: rename gen_initramfs_list.sh to
gen_initramfs.sh"). Fixing this.
Basically does:
$ sed -i -e s/gen_initramfs_list.sh/gen_initramfs.sh/g $(git grep -l gen_initramfs_list.sh)
Fixes: 80e715a06c2d ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh") Signed-off-by: Robert Richter <rrichter@amd.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Kbuild: lto: fix module versionings mismatch in GNU make 3.X
When building modules(CONFIG_...=m), I found some of module versions
are incorrect and set to 0.
This can be found in build log for first clean build which shows
WARNING: EXPORT symbol "XXXX" [drivers/XXX/XXX.ko] version generation failed,
symbol will not be versioned.
But in second build(incremental build), the WARNING disappeared and the
module version becomes valid CRC and make someone who want to change
modules without updating kernel image can't insert their modules.
The problematic code is
+ $(foreach n, $(filter-out FORCE,$^), \
+ $(if $(wildcard $(n).symversions), \
+ ; cat $(n).symversions >> $@.symversions))
`foreach n` shows nothing to `cat` into $(n).symversions because
`if $(wildcard $(n).symversions)` return nothing, but actually
they do exist during this line was executed.
-rw-r--r-- 1 root root 168580 Jun 13 19:10 fs/notify/fsnotify.o
-rw-r--r-- 1 root root 111 Jun 13 19:10 fs/notify/fsnotify.o.symversions
The reason is the $(n).symversions are generated at runtime, but
Makefile wildcard function expends and checks the file exist or not
during parsing the Makefile.
Thus fix this by use `test` shell command to check the file
existence in runtime.
Rebase from both:
1. [https://lore.kernel.org/lkml/20210616080252.32046-1-lecopzer.chen@mediatek.com/]
2. [https://lore.kernel.org/lkml/20210702032943.7865-1-lecopzer.chen@mediatek.com/]
kbuild: do not suppress Kconfig prompts for silent build
When a new CONFIG option is available, Kbuild shows a prompt to get
the user input.
$ make
[ snip ]
Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW)
This is the only interactive place in the build process.
Commit 174a1dcc9642 ("kbuild: sink stdout from cmd for silent build")
suppressed Kconfig prompts as well because syncconfig is invoked by
the 'cmd' macro. You cannot notice the fact that Kconfig is waiting
for the user input.
Use 'kecho' to show the equivalent short log without suppressing stdout
from sub-make.
scripts/setlocalversion: fix a bug when LOCALVERSION is empty
The commit 042da426f8eb ("scripts/setlocalversion: simplify the short
version part") reduces indentation. Unfortunately, it also changes behavior
in a subtle way - if the user has empty "LOCALVERSION" variable, the plus
sign is appended to the kernel version. It wasn't appended before.
This patch reverts to the old behavior - we append the plus sign only if
the LOCALVERSION variable is not set.
Fixes: 042da426f8eb ("scripts/setlocalversion: simplify the short version part") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Yang Jihong [Tue, 13 Jul 2021 11:23:58 +0000 (19:23 +0800)]
perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set
The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user
if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events.
As a result, the command fails.
Error: File /sys/kernel/tracing/events/sched/sched_stat_wait not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Solution:
Check whether schedstat tracepoints are exposed. If no, these events are not recorded.
After:
# perf sched record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ]
# perf sched report
run measurement overhead: 4736 nsecs
sleep measurement overhead: 9059979 nsecs
the run test took 999854 nsecs
the sleep test took 8945271 nsecs
nr_run_events: 716
nr_sleep_events: 785
nr_wakeup_events: 0
...
------------------------------------------------------------
Fixes: 2a09b5de235a6 ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Yafang Shao <laoar.shao@gmail.com> Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Yang Jihong [Thu, 15 Jul 2021 06:37:23 +0000 (14:37 +0800)]
perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel
The "address" member of "struct probe_trace_point" uses long data type.
If kernel is 64-bit and perf program is 32-bit, size of "address"
variable is 32 bits.
As a result, upper 32 bits of address read from kernel are truncated, an
error occurs during address comparison in kprobe_warn_out_range().
Before:
# perf probe -a schedule
schedule is out of .text, skip it.
Error: Failed to add events.
Solution:
Change data type of "address" variable to u64 and change corresponding
address printing and value assignment.
After:
# perf.new.new probe -a schedule
Added new event:
probe:schedule (on schedule)
Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jianlin Lv <jianlin.lv@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Huafei <lihuafei1@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lore.kernel.org/lkml/20210715063723.11926-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's not clear why, but it causes unexplained problems in entirely
unrelated xfs code. The most likely explanation is some slab
corruption, possibly triggered due to CONFIG_SLUB_DEBUG_ON. See [1].
It ends up having a few other problems too, like build errors on
arch/arc, and Geert reporting it using much more memory on m68k [3] (it
probably does so elsewhere too, but it is probably just more noticeable
on m68k).
The architecture issues (both build and memory use) are likely just
because this change effectively force-enabled STACKDEPOT (along with a
very bad default value for the stackdepot hash size). But together with
the xfs issue, this all smells like "this commit was not ready" to me.
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One core fix for an oops which can occur if the error handling thread
fails to start for some reason and the driver is removed.
The other fixes are all minor ones in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Add missing host_lock in ufshcd_vops_setup_xfer_req()
scsi: mpi3mr: Fix W=1 compilation warnings
scsi: pm8001: Clean up kernel-doc and comments
scsi: zfcp: Report port fc_security as unknown early during remote cable pull
scsi: core: Fix bad pointer dereference when ehandler kthread is invalid
scsi: fas216: Fix a build error
scsi: core: Fix the documentation of the scsi_execute() time parameter
Merge tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Eight cifs/smb3 fixes, including three for stable.
Three are DFS related fixes, and two to fix problems pointed out by
static checkers"
* tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: do not share tcp sessions of dfs connections
SMB3.1.1: fix mount failure to some servers when compression enabled
cifs: added WARN_ON for all the count decrements
cifs: fix missing null session check in mount
cifs: handle reconnect of tcon when there is no cached dfs referral
cifs: fix the out of range assignment to bit fields in parse_server_interfaces
cifs: Do not use the original cruid when following DFS links for multiuser mounts
cifs: use the expiry output of dns_query to schedule next resolution
Merge tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"Fixes to kunit tool and documentation:
- fix asserts on older python versions
- fixes to misleading error messages when TAP header format is
incorrect or when file is missing
- documentation fix: drop obsolete information about uml_abort
coverage
- remove unnecessary annotations"
* tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Assert the version requirement
kunit: tool: remove unnecessary "annotations" import
Documentation: kunit: drop obsolete note about uml_abort for coverage
kunit: tool: Fix error messages for cases of no tests and wrong TAP header
Merge tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"A fix to memory-hotplug hot-remove test to stop spamming logs with
dump_page() entries and slowing the system down to a crawl"
* tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: memory-hotplug: avoid spamming logs with dump_page(), ratio limit hot-remove error test
Merge tag 'trace-v5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix the histogram logic from possibly crashing the kernel
Working on the histogram code, I found that if you dereference a char
pointer in a trace event that happens to point to user space, it can
crash the kernel, as it does no checks of that pointer. I have code
coming that will do this better, so just remove this ability to treat
character pointers in trace events as stings in the histogram"
* tag 'trace-v5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do not reference char * as a string in histograms
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The bulk of the diffstat consists of changes to our uaccess routines
so that they fall back to bytewise copying prior to reporting complete
failure when the initial (multi-byte) access faults.
However, the most disappointing change here is that we've had to bump
ARCH_DMA_MINALIGN back to 128 bytes thanks to Qualcomm's "Kryo" CPU,
which ended up in the MSM8996 mobile SoC. Still, at least we're now
aware of this design and one of the hardware designers confirmed the
L2 cacheline size for us.
Summary:
- Fix instrumentation annotations for entry code
- Ensure kernel MTE state is restored correctly on resume from suspend
- Fix MTE fault from new strlen() routine
- Fallback to byte-wise accesses on initial uaccess fault
- Bump Clang requirement for BTI
- Revert ARCH_DMA_MINALIGN back to 128 bytes (shakes fist at Qualcomm)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: entry: fix KCOV suppression
arm64: entry: add missing noinstr
arm64: mte: fix restoration of GCR_EL1 from suspend
arm64: Avoid premature usercopy failure
arm64: Restrict ARM64_BTI_KERNEL to clang 12.0.0 and newer
Revert "arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES)"
arm64: Add missing header <asm/smp.h> in two files
arm64: fix strlen() with CONFIG_KASAN_HW_TAGS
Stefan Wahren [Sat, 10 Jul 2021 11:04:55 +0000 (13:04 +0200)]
ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
been a "regression source" a lot of times. The last case is breakage of
USB mass storage boot has been commit e590474768f1 ("driver core: Set
fw_devlink=on by default") for multi_v7_defconfig. As long as
NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
endlessly and prevent booting from USB mass storage device. So make
the driver built-in as in bcm2835_defconfig and arm64/defconfig.
The platform lost the framebuffer due to a commit solving a
circular dependency in v5.14-rc1, so add it back in by explicitly
selecting the framebuffer.
The U8500 has also gained a few systems using touchscreens from
Cypress, Melfas and Zinitix so add these at the same time as
we're updating the defconfig anyway.
This updates the Versatile Express defconfig for the changes
in the v5.14-rc1 kernel:
- The Framebuffer CONFIG_FB needs to be explicitly selected
or we don't get any framebuffer anymore. DRM has stopped to
select FB because of circular dependency.
- CONFIG_CMA options were moved around.
- CONFIG_MODULES options were moved around.
- CONFIG_CRYPTO_HW was moved around.
This updates the Versatile defconfig for the changes
in the v5.14-rc1 kernel:
- The Framebuffer CONFIG_FB needs to be explicitly selected
or we don't get any framebuffer anymore. DRM has stopped to
select FB because of circular dependency.
- The CONFIG_FB_MODE_HELPERS are not needed when using DRM
framebuffer emulation as DRM does.
- The Acorn fonts are removed, the default framebuffer font
works fine. I don't know why this was selected in the first
place or how the Kconfig was altered so it was removed.
This updates the RealView defconfig for the changes
in the v5.14-rc1 kernel:
- The Framebuffer CONFIG_FB needs to be explicitly selected
or we don't get any framebuffer anymore. DRM has stopped to
select FB because of circular dependency.
- The CONFIG_FB_MODE_HELPERS are not needed when using DRM
framebuffer emulation as DRM does.
- Drop two unused penguin logos.
This updates the Integrator defconfig for the changes
in the v5.14-rc1 kernel:
- The Framebuffer CONFIG_FB needs to be explicitly selected
or we don't get any framebuffer anymore. DRM has stopped to
select FB because of circular dependency.
- Drop the unused Matrox FB drivers that are only used with
specific PCI cards.
Merge tag 'scmi-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
ARM SCMI fixes for v5.14
A small set of fixes:
- adding check for presence of probe while registering the driver to
prevent NULL pointer access
- dropping the duplicate check as the driver core already takes care of it
- fix for possible scmi_linux_errmap buffer overflow
- fix to avoid sensor message structure padding
- fix the range check for the maximum number of pending SCMI messages
- fix for various kernel-doc warnings
* tag 'scmi-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix range check for the maximum number of pending messages
firmware: arm_scmi: Avoid padding in sensor message structure
firmware: arm_scmi: Fix kernel doc warnings about return values
firmware: arm_scpi: Fix kernel doc warnings
firmware: arm_scmi: Fix kernel doc warnings
firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow
firmware: arm_scmi: Ensure drivers provide a probe function
firmware: arm_scmi: Simplify device probe function on the bus
Merge tag 'arm-ffa-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fixes for v5.14
A small set of fixes:
- adding check for presence of probe while registering the driver to
prevent NULL pointer access
- dropping the duplicate check as the driver core already takes care of it
- fixing possible ffa_linux_errmap buffer overflow and
- fixing kernel-doc warning for comment style
* tag 'arm-ffa-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow
firmware: arm_ffa: Fix the comment style
firmware: arm_ffa: Simplify probe function
firmware: arm_ffa: Ensure drivers provide a probe function
Merge tag 'tegra-for-5.14-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
arm64: tegra: Device tree fixes for v5.14-rc1
This contains two late fixes for Tegra194 device tree files to restore
USB and audio functionality after enabling system-wide IOMMU support.
* tag 'tegra-for-5.14-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable SMMU support for USB on Tegra194
arm64: tegra: Enable audio IOMMU support on Tegra194
Merge tag 'renesas-fixes-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v5.14
- Fix a clock/reset handling design issue on the new RZ/G2L SoC,
requiring an atomic change to DT binding definitions, clock driver,
and DTS,
- Restore graphical consoles in the shmobile_defconfig.
* tag 'renesas-fixes-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Restore graphical consoles
dt-bindings: clock: r9a07g044-cpg: Update clock/reset definitions
clk: renesas: r9a07g044: Add P2 Clock support
clk: renesas: r9a07g044: Fix P1 Clock
clk: renesas: r9a07g044: Rename divider table
clk: renesas: rzg2l: Add multi clock PM support
Merge tag 'memory-controller-drv-tegra-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes
Memory controller drivers for v5.14 - Tegra SoC, late fixes
Two fixes for recent series of changes in Tegra SoC memory controller
drivers:
1. Add a stub for tegra_mc_probe_device() to fix compile testing of
arm-smmu without TEGRA_MC.
2. Fix arm-smmu dtschema syntax.
* tag 'memory-controller-drv-tegra-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
dt-bindings: arm-smmu: Fix json-schema syntax
memory: tegra: Add compile-test stub for tegra_mc_probe_device()
Merge tag 'docs-5.14-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of fixes in and around documentation.
Some funky quotes in LICENSES/dual/CC-BY-4.0 were giving spdxcheck.py
grief; that has been fixed on both ends. Also a couple of features
updates and one docs build fix"
* tag 'docs-5.14-2' of git://git.lwn.net/linux:
docs/zh_CN: add a missing space character
Documentation/features: Add THREAD_INFO_IN_TASK feature matrix
Documentation/features: Update the ARCH_HAS_TICK_BROADCAST entry
LICENSES/dual/CC-BY-4.0: Git rid of "smart quotes"
scripts/spdxcheck.py: Strictly read license files in utf-8
Merge tag 'block-5.14-2021-07-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe fixes via Christoph:
- fix various races in nvme-pci when shutting down just after
probing (Casey Chen)
- fix a net_device leak in nvme-tcp (Prabhakar Kushwaha)
- Fix regression in xen-blkfront by cleaning up the removal state
machine (Christoph)
- Fix tag_set and queue cleanup ordering regression in nbd (Wang)
- Fix tag_set and queue cleanup ordering regression in pd (Guoqing)
* tag 'block-5.14-2021-07-16' of git://git.kernel.dk/linux-block:
xen-blkfront: sanitize the removal state machine
nbd: fix order of cleaning up the queue and freeing the tagset
pd: fix order of cleaning up the queue and freeing the tagset
nvme-pci: do not call nvme_dev_remove_admin from nvme_remove
nvme-pci: fix multiple races in nvme_setup_io_queues
nvme-tcp: use __dev_get_by_name instead dev_get_by_name for OPT_HOST_IFACE
Merge tag 'io_uring-5.14-2021-07-16' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two small fixes: one fixing the process target of a check, and the
other a minor issue with the drain error handling"
* tag 'io_uring-5.14-2021-07-16' of git://git.kernel.dk/linux-block:
io_uring: fix io_drain_req()
io_uring: use right task for exiting checks
Merge tag 'drm-fixes-2021-07-16' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular rc2 fixes though a bit more than usual at rc2 stage, people
must have been testing early or else some fixes from last week got a
bit laggy.
There is one larger change in the amd fixes to amalgamate some power
management code on the newer chips with the code from the older chips,
it should only affects chips where support was introduced in rc1 and
it should make future fixes easier to maintain probably a good idea to
merge it now.
Otherwise it's mostly fixes across the board.
dma-buf:
- Fix fence leak in sync_file_merge() error code
drm/panel:
- nt35510: Don't fail on DSI reads
fbdev:
- Avoid use-after-free by not deleting current video mode
ttm:
- Avoid NULL-ptr deref in ttm_range_man_fini()
vmwgfx:
- Fix a merge commit
qxl:
- fix a TTM regression
amdgpu:
- SR-IOV fixes
- RAS fixes
- eDP fixes
- SMU13 code unification to facilitate fixes in the future
- Add new renoir DID
- Yellow Carp fixes
- Beige Goby fixes
- Revert a bunch of TLB fixes that caused regressions
- Revert an LTTPR display regression
amdkfd
- Fix VRAM access regression
- SVM fixes
i915:
- Fix -EDEADLK handling regression
- Drop the page table optimisation"
* tag 'drm-fixes-2021-07-16' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/amdgpu: add another Renoir DID
drm/ttm: add a check against null pointer dereference
drm/i915/gtt: drop the page table optimisation
drm/i915/gt: Fix -EDEADLK handling regression
drm/amd/pm: Add waiting for response of mode-reset message for yellow carp
Revert "drm/amdkfd: Add heavy-weight TLB flush after unmapping"
Revert "drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update"
Revert "drm/amdkfd: Make TLB flush conditional on mapping"
Revert "drm/amdgpu: Fix warning of Function parameter or member not described"
Revert "drm/amdkfd: Add memory sync before TLB flush on unmap"
drm/amd/pm: Fix BACO state setting for Beige_Goby
drm/amdgpu: Restore msix after FLR
drm/amdkfd: Allow CPU access for all VRAM BOs
drm/amdgpu/display - only update eDP's backlight level when necessary
drm/amdkfd: handle fault counters on invalid address
drm/amdgpu: Correct the irq numbers for virtual crtc
drm/amd/display: update header file name
drm/amd/pm: drop smu_v13_0_1.c|h files for yellow carp
drm/amd/display: remove faulty assert
Revert "drm/amd/display: Always write repeater mode regardless of LTTPR"
...
Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fixes from Paul McKenney:
- fix regressions induced by a merge-window change in scheduler
semantics, which means that smp_processor_id() can no longer be used
in kthreads using simple affinity to bind themselves to a specific
CPU.
- fix a bug in Tasks Trace RCU that was thought to be strictly
theoretical. However, production workloads have started hitting this,
so these fixes need to be merged sooner rather than later.
- fix a minor printk()-format-mismatch issue introduced during the
merge window.
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu: Fix pr_info() formats and values in show_rcu_gp_kthreads()
rcu-tasks: Don't delete holdouts within trc_wait_for_one_reader()
rcu-tasks: Don't delete holdouts within trc_inspect_reader()
refscale: Avoid false-positive warnings in ref_scale_reader()
scftorture: Avoid false-positive warnings in scftorture_invoker()
dt-bindings: display: renesas,du: Make resets optional on R-Car H1
The "resets" property is not present on R-Car Gen1 SoCs.
Supporting it would require migrating from renesas,cpg-clocks to
renesas,cpg-mssr.
Reflect this in the DT bindings by removing the global "required:
resets". All SoCs that do have "resets" properties already have
SoC-specific rules making it required.
The first of these leaks is caused by obj_buf never being deallocated in
__test__bpf.
This patch adds the missing free.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: ba1fae431e74bb42 ("perf test: Add 'perf test BPF'") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lore.kernel.org/lkml/60f3ca935fe6672e7e866276ce6264c9e26e4c87.1626343282.git.rickyman7@gmail.com
[ Added missing stdlib.h include ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Paulo Alcantara [Fri, 16 Jul 2021 00:53:53 +0000 (21:53 -0300)]
cifs: do not share tcp sessions of dfs connections
Make sure that we do not share tcp sessions of dfs mounts when
mounting regular shares that connect to same server. DFS connections
rely on a single instance of tcp in order to do failover properly in
cifs_reconnect().
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
It turns out that the problem with the clang -Wimplicit-fallthrough
warning is not about the kernel source code, but about clang itself, and
that the warning is unusable until clang fixes its broken ways.
In particular, when you enable this warning for clang, you not only get
warnings about implicit fallthroughs. You also get this:
warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough]
which is completely broken becasue it
(a) doesn't even tell you where the problem is (seriously: no line
numbers, no filename, no nothing).
(b) is fundamentally broken anyway, because there are perfectly valid
reasons to have a fallthrough statement even if it turns out that
it can perhaps not be reached.
In the kernel, an example of that second case is code in the scheduler:
switch (state) {
case cpuset:
if (IS_ENABLED(CONFIG_CPUSETS)) {
cpuset_cpus_allowed_fallback(p);
state = possible;
break;
}
fallthrough;
case possible:
where if CONFIG_CPUSETS is enabled you actually never hit the
fallthrough case at all. But that in no way makes the fallthrough
wrong.
So the warning is completely broken, and enabling it for clang is a very
bad idea.
In the meantime, we can keep the gcc option enabled, and make the gcc
build use
-Wimplicit-fallthrough=5
which means that we will at least continue to require a proper
fallthrough statement, and that gcc won't silently accept the magic
comment versions. Because gcc does this all correctly, and while the odd
"=5" part is kind of obscure, it's documented in [1]:
"-Wimplicit-fallthrough=5 doesn’t recognize any comments as
fallthrough comments, only attributes disable the warning"
so if clang ever fixes its bad behavior we can try enabling it there again.
Link: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html Cc: Kees Cook <keescook@chromium.org> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'pwm/for-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"A couple of fixes from Uwe that I missed for v5.14-rc1"
* tag 'pwm/for-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: ep93xx: Ensure configuring period and duty_cycle isn't wrongly skipped
pwm: berlin: Ensure configuring period and duty_cycle isn't wrongly skipped
pwm: tiecap: Ensure configuring period and duty_cycle isn't wrongly skipped
pwm: spear: Ensure configuring period and duty_cycle isn't wrongly skipped
pwm: sprd: Ensure configuring period and duty_cycle isn't wrongly skipped
Steve French [Thu, 15 Jul 2021 04:32:09 +0000 (23:32 -0500)]
SMB3.1.1: fix mount failure to some servers when compression enabled
When sending the compression context to some servers, they rejected
the SMB3.1.1 negotiate protocol because they expect the compression
context to have a data length of a multiple of 8.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
We have a few ref counters srv_count, ses_count and
tc_count which we use for ref counting. Added a WARN_ON
during the decrement of each of these counters to make
sure that they don't go below their minimum values.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Wed, 14 Jul 2021 00:40:33 +0000 (19:40 -0500)]
cifs: fix missing null session check in mount
Although it is unlikely to be have ended up with a null
session pointer calling cifs_try_adding_channels in cifs_mount.
Coverity correctly notes that we are already checking for
it earlier (when we return from do_dfs_failover), so at
a minimum to clarify the code we should make sure we also
check for it when we exit the loop so we don't end up calling
cifs_try_adding_channels or mount_setup_tlink with a null
ses pointer.
Addresses-Coverity: 1505608 ("Derefernce after null check") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
Merge tag 'Wimplicit-fallthrough-clang-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo Silva:
"This fixes many fall-through warnings when building with Clang and
-Wimplicit-fallthrough, and also enables -Wimplicit-fallthrough for
Clang, globally.
It's also important to notice that since we have adopted the use of
the pseudo-keyword macro fallthrough, we also want to avoid having
more /* fall through */ comments being introduced. Contrary to GCC,
Clang doesn't recognize any comments as implicit fall-through markings
when the -Wimplicit-fallthrough option is enabled.
So, in order to avoid having more comments being introduced, we use
the option -Wimplicit-fallthrough=5 for GCC, which similar to Clang,
will cause a warning in case a code comment is intended to be used as
a fall-through marking. The patch for Makefile also enforces this.
We had almost 4,000 of these issues for Clang in the beginning, and
there might be a couple more out there when building some
architectures with certain configurations. However, with the recent
fixes I think we are in good shape and it is now possible to enable
the warning for Clang"
* tag 'Wimplicit-fallthrough-clang-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (27 commits)
Makefile: Enable -Wimplicit-fallthrough for Clang
powerpc/smp: Fix fall-through warning for Clang
dmaengine: mpc512x: Fix fall-through warning for Clang
usb: gadget: fsl_qe_udc: Fix fall-through warning for Clang
powerpc/powernv: Fix fall-through warning for Clang
MIPS: Fix unreachable code issue
MIPS: Fix fall-through warnings for Clang
ASoC: Mediatek: MT8183: Fix fall-through warning for Clang
power: supply: Fix fall-through warnings for Clang
dmaengine: ti: k3-udma: Fix fall-through warning for Clang
s390: Fix fall-through warnings for Clang
dmaengine: ipu: Fix fall-through warning for Clang
iommu/arm-smmu-v3: Fix fall-through warning for Clang
mmc: jz4740: Fix fall-through warning for Clang
PCI: Fix fall-through warning for Clang
scsi: libsas: Fix fall-through warning for Clang
video: fbdev: Fix fall-through warning for Clang
math-emu: Fix fall-through warning
cpufreq: Fix fall-through warning for Clang
drm/msm: Fix fall-through warning in msm_gem_new_impl()
...
# perf test "88: Check open filename arg using perf trace + vfs_getname"
The third of these leaks is related to evsel->priv fields of sycalls
never being deallocated.
This patch adds the function evlist__free_syscall_tp_fields which
iterates over all evsels in evlist, matching syscalls, and calling the
missing frees.
This new function is called at the end of trace__run, right before
calling evlist__delete.
projects / mirror_ubuntu-kernels.git / log