Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 LDFLAGS clean-up from Catalin Marinas:
- use aarch64elf instead of aarch64linux
- move endianness options to LDFLAGS instead from LD
- remove no-op '-p' linker flag
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: remove no-op -p linker flag
arm64: add endianness option to LDFLAGS instead of LD
arm64: Use aarch64elf and aarch64elfb emulation mode variants
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"The usual collection of driver fixlets:
- build cleanup/fix for the sunxi makefile that tried to save size
but failed and prevented dead code elimination from working
- two Davinci clk driver fixes for a typo causing build failures in
different configurations and an error check that checks the wrong
variable.
- undo the DT ABI breaking imx6ul binding header shuffle that got
merged this cycle"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
dt-bindings: clock: imx6ul: Do not change the clock definition order
clk: davinci: fix a typo (which leads to build failures)
clk: davinci: cfgchip: testing the wrong variable
clk: sunxi-ng: replace lib-y with obj-y
Merge tag 'vfio-v4.18-rc4' of git://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Make vfio-pci IGD extensions optional via Kconfig (Alex Williamson)
- Remove unused and soon to be removed map_atomic callback from mbochs
sample driver, add unmap callback to avoid dmabuf leaks (Gerd
Hoffmann)
- Fix usage of get_user_pages_longterm() (Jason Gunthorpe)
- Fix sample mbochs driver vm_operations_struct.fault return type
(Souptick Joarder)
* tag 'vfio-v4.18-rc4' of git://github.com/awilliam/linux-vfio:
sample/vfio-mdev: Change return type to vm_fault_t
vfio: Use get_user_pages_longterm correctly
sample/mdev/mbochs: add mbochs_kunmap_dmabuf
sample/mdev/mbochs: remove mbochs_kmap_atomic_dmabuf
vfio/pci: Make IGD support a configurable option
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"A few more changes for v4.18:
- wire up the two new system calls io_pgetevents and rseq
- fix a register corruption in the expolines code for machines
without EXRL
- drastically reduce the memory utilization of the dasd driver
- fix reference counting for KVM page table pages"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: wire up rseq system call
s390: wire up io_pgetevents system call
s390/mm: fix refcount usage for 4K pgste
s390/dasd: reduce the default queue depth and nr of hardware queues
s390: Correct register corruption in critical section cleanup
Merge tag 'drm-fixes-2018-07-06' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is the drm fixes for rc4.
It's a bit larger than I'd like but the exynos cleanups are pretty
mechanical, and I'd rather have them in sooner rather than later so we
can avoid too much conflicts around them. The non-mechanincal exynos
changes are mostly fixes for new feature recently introduced.
Apart from the exynos updates, we have:
i915:
- GVT and GGTT mapping fixes
amdgpu:
- fix HDMI2.0 4K@60 Hz regression
- Hotplug fixes for dual-GPU laptops to make power management better
- misc vega12 bios fixes, a race fix and some typos.
sii8620 bridge:
- small fixes around mode setting
core:
- use kvzalloc to allocate blob property memory"
* tag 'drm-fixes-2018-07-06' of git://anongit.freedesktop.org/drm/drm: (34 commits)
drm/amd/display: add a check for display depth validity
drm/amd/display: adding ycbcr420 pixel encoding for hdmi
drm/udl: fix display corruption of the last line
drm/bridge/sii8620: Fix link mode selection
drm/bridge/sii8620: Fix display of packed pixel modes
drm/bridge/sii8620: Send AVI infoframe in all MHL versions
drm/amdgpu: fix user fence write race condition
drm/i915: Try GGTT mmapping whole object as partial
drm/amdgpu/pm: fix display count in non-DC path
drm/amdgpu: fix swapped emit_ib_size in vce3
drm: Use kvzalloc for allocating blob property memory
drm/i915/gvt: changed DDI mode emulation type
drm/i915/gvt: fix a bug of partially write ggtt enties
drm/exynos: Replace drm_dev_unref with drm_dev_put
drm/exynos: Replace drm_gem_object_unreference_unlocked with put function
drm/exynos: Replace drm_framebuffer_{un/reference} with put,get functions
drm/exynos: ipp: use correct enum type
drm/exynos: decon5433: Fix WINCONx reset value
drm/exynos: decon5433: Fix per-plane global alpha for XRGB modes
drm/exynos: fimc: Use real buffer width for configuring the hardware
...
Merge tag 'trace-v4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes and cleanups from Steven Rostedt:
"While cleaning out my INBOX, I found a few patches that were lost in
the noise. These are minor bug fixes and clean ups. Those include:
- avoid a string overflow
- code that didn't match the comment (but should)
- a small code optimization (use of a conditional)
- quiet printf warnings
- nuke unused code
- fix function graph interrupt annotation"
* tag 'trace-v4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix missing return symbol in function_graph output
ftrace: Nuke clear_ftrace_function
tracing: Use __printf markup to silence compiler
tracing: Optimize trace_buffer_iter() logic
tracing: Make create_filter() code match the comments
tracing: Avoid string overflow
Dave Airlie [Fri, 6 Jul 2018 00:46:58 +0000 (10:46 +1000)]
Merge tag 'exynos-drm-fixes-for-v4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Fixups
- Fix several problems to IPPv2 merged to mainline recentely.
. An align problem of width size that IPP driver incorrectly
calculated the real buffer size.
. Horizontal and vertical flip problem.
. Per-plane global alpha for XRGB modes.
. Incorrect variant of the YUV modes.
- Fix plane overlapping problem.
. The stange order of overlapping planes on XRGB modes
by setting global alpha value to maximum value.
Cleanup
- Rename a enum type, drm_ipp_size_id, to one specific to Exynos,
drm_exynos_ipp_limit_type.
- Replace {un/reference} with {put,get} functions.
. it replaces several reference/unreference functions with Linux
kernel nameing standard.
Dave Airlie [Fri, 6 Jul 2018 00:44:35 +0000 (10:44 +1000)]
Merge branch 'drm-fixes-4.18' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
- Fix an HDMI 2.0 4k@60 regression
- Hotplug fixes for PX/HG laptops
- Fixes for vbios changes in vega12
- Fix a race in the user fence code
- Fix a couple of misc typos
sgid directories have special semantics, making newly created files in
the directory belong to the group of the directory, and newly created
subdirectories will also become sgid. This is historically used for
group-shared directories.
But group directories writable by non-group members should not imply
that such non-group members can magically join the group, so make sure
to clear the sgid bit on non-directories for non-members (but remember
that sgid without group execute means "mandatory locking", just to
confuse things even more).
Reported-by: Jann Horn <jannh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It turns out that systemd has a bug: it wants to load the autofs module
early because of some initialization ordering with udev, and it doesn't
do that correctly. Everywhere else it does the proper "look up module
name" that does the proper alias resolution, but in that early code, it
just uses a hardcoded "autofs4" for the module name.
The result of that is that as of commit a2225d931f75 ("autofs: remove
left-over autofs4 stubs"), you get
systemd[1]: Failed to insert module 'autofs4': No such file or directory
in the system logs, and a lack of module loading. All this despite the
fact that we had very clearly marked 'autofs4' as an alias for this
module.
What's so ridiculous about this is that literally everything else does
the module alias handling correctly, including really old versions of
systemd (that just used 'modprobe' to do this), and even all the other
systemd module loading code.
Only that special systemd early module load code is broken, hardcoding
the module names for not just 'autofs4', but also "ipv6", "unix",
"ip_tables" and "virtio_rng". Very annoying.
Instead of creating an _additional_ separate compatibility 'autofs4'
module, just rely on the fact that everybody else gets this right, and
just call the module 'autofs4' for compatibility reasons, with 'autofs'
as the alias name.
That will allow the systemd people to fix their bugs, adding the proper
alias handling, and maybe even fix the name of the module to be just
"autofs" (so that they can _test_ the alias handling). And eventually,
we can revert this silly compatibility hack.
Without this flag, the ARM64 defconfig kernel successfully links with
lld and boots on Dragonboard 410c.
After digging through binutils source and changelogs, it turns out that
-p is only relevant to ancient binutils installations targeting 32-bit
ARM. binutils accepts -p for AArch64 too, but it's always been
undocumented and silently ignored. A comment in
ld/emultempl/aarch64elf.em explains that it's "Only here for backwards
compatibility".
Since this flag is a no-op on ARM64, we can safely drop it.
Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Merge tag 'acpi-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a recent ACPICA regression, fix a battery driver regression
introduced during the 4.17 cycle and fix up the recently added support
for the PPTT ACPI table.
Specifics:
- Revert part of a recent ACPICA regression fix that added leading
newlines to ACPICA error messages and made the kernel log look
broken (Rafael Wysocki).
- Fix an ACPI battery driver regression introduced during the 4.17
cycle due to incorrect error handling that made Thinkpad 13 laptops
crash on boot (Jouke Witteveen).
- Fix up the recently added PPTT ACPI table support by covering the
case when a PPTT structure represents a processors group correctly
(Sudeep Holla)"
* tag 'acpi-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / battery: Safe unregistering of hooks
ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set
ACPICA: Drop leading newlines from error messages
Merge tag 'pm-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a PCI power management regression introduced during the 4.17
cycle and fix up the recently added support for devices in multiple
power domains.
Specifics:
- Resume parallel PCI (non-PCIe) bridges on suspend-to-RAM (ACP S3)
to avoid confusing the platform firmware which started to happen
after a core power management regression fix that went in during
the 4.17 cycle (Rafael Wysocki).
- Fix up the recently added support for devices in multiple power
domains by avoiding to power up the entire domain unnecessarily
when attaching a device to it (Ulf Hansson)"
* tag 'pm-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / Domains: Don't power on at attach for the multi PM domain case
PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM
Merge tag 'riscv-for-linus-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V fixes from Palmer Dabbelt:
"This contains a handful of fixes for the RISC-V port:
- A fix to R_RISCV_ADD32/R_RISCV_SUB32 relocations that allows
modules that use these to load correctly.
- The removal of of_platform_populate(), which is obselete.
- The removal of irq-riscv-intc.h, which is obselete.
- A fix to PTRACE_SETREGSET.
- Fixes that allow the RV32I kernel to build (at least for Zong, I've
got another patch on the mailing list that's necessary on my setup :)).
I've just given these a defconfig build test"
* tag 'riscv-for-linus-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: Fix PTRACE_SETREGSET bug.
RISC-V: Don't include irq-riscv-intc.h
riscv: remove unnecessary of_platform_populate call
RISC-V: fix R_RISCV_ADD32/R_RISCV_SUB32 relocations
RISC-V: Change variable type for 32-bit compatible
RISC-V: Add definiion of extract symbol's index and type for 32-bit
RISC-V: Select GENERIC_UCMPDI2 on RV32I
RISC-V: Add conditional macro for zone of DMA32
drm/amd/display: add a check for display depth validity
[why]
HDMI 2.0 fails to validate 4K@60 timing with 10 bpc
[how]
Adding a helper function that would verify if the display depth
assigned would pass a bandwidth validation.
Drop the display depth by one level till calculated pixel clk
is lower than maximum TMDS clk.
Bugzilla: https://bugs.freedesktop.org/106959
Tested-by: Mike Lothian <mike@fireburn.co.uk> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: adding ycbcr420 pixel encoding for hdmi
[why]
HDMI EDID's VSDB contains spectial timings for specifically
YCbCr 4:2:0 colour space. In those cases we need to verify
if the mode provided is one of the special ones has to use
YCbCr 4:2:0 pixel encoding for display info.
[how]
Verify if the mode is using specific ycbcr420 colour space with
the help of DRM helper function and assign the mode to use
ycbcr420 pixel encoding.
Tested-by: Mike Lothian <mike@fireburn.co.uk> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mikulas Patocka [Sun, 3 Jun 2018 14:40:54 +0000 (16:40 +0200)]
drm/udl: fix display corruption of the last line
The displaylink hardware has such a peculiarity that it doesn't render a
command until next command is received. This produces occasional
corruption, such as when setting 22x11 font on the console, only the first
line of the cursor will be blinking if the cursor is located at some
specific columns.
When we end up with a repeating pixel, the driver has a bug that it leaves
one uninitialized byte after the command (and this byte is enough to flush
the command and render it - thus it fixes the screen corruption), however
whe we end up with a non-repeating pixel, there is no byte appended and
this results in temporary screen corruption.
This patch fixes the screen corruption by always appending a byte 0xAF at
the end of URB. It also removes the uninitialized byte.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
arm64: add endianness option to LDFLAGS instead of LD
With the recent syntax extension, Kconfig is now able to evaluate the
compiler / toolchain capability.
However, accumulating flags to 'LD' is not compatible with the way
it works; 'LD' must be passed to Kconfig to call $(ld-option,...)
from Kconfig files. If you tweak 'LD' in arch Makefile depending on
CONFIG_CPU_BIG_ENDIAN, this would end up with circular dependency
between Makefile and Kconfig.
These patches for building 32-bit RISC-V kernel.
- Fix the compile errors and warnings on RV32I.
- Fix some incompatible problem on RV32I.
- Add format.h for compatible of print format.
The fixed width integer types format for Elf_Addr will move to
generic header by another patch. For now, there are some warning
about unexpected argument of type on RV32I.
Change in v1:
- Fix some error in v1
- Remove implementation of fixed width integer types format for Elf_Addr.
Palmer Dabbelt [Fri, 22 Jun 2018 22:46:28 +0000 (15:46 -0700)]
RISC-V: Don't include irq-riscv-intc.h
This file has never existed in the upstream kernel, but it's guarded by
an #ifdef that's also never existed in the upstream kernel. As a part
of our interrupt controller refactoring this header is no longer
necessary, but this reference managed to sneak in anyway.
The DT core will call of_platform_default_populate, so it is not
necessary for arch specific code to call it unless there are custom
match entries, auxdata or parent device. Neither of those apply here, so
remove the call.
Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: linux-riscv@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
arm64: Use aarch64elf and aarch64elfb emulation mode variants
The aarch64linux and aarch64linuxb emulation modes are not supported by
bare-metal toolchains and Linux using them forbids building the kernel
with these toolchains.
Since there is apparently no reason to target these emulation modes, the
more generic elf modes are used instead, allowing to build on bare-metal
toolchains as well as the already-supported ones.
Fixes: 3d6a7b99e3fa ("arm64: ensure the kernel is compiled for LP64") Cc: stable@vger.kernel.org Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Maciej Purski [Thu, 28 Jun 2018 16:44:02 +0000 (18:44 +0200)]
drm/bridge/sii8620: Fix display of packed pixel modes
Current implementation does not guarantee packed pixel modes working
with every dongle. There are some dongles, which require selecting
the output mode explicitly.
Write proper values to registers in packed_pixel mode, based on how it
is done in vendor's code. Select output color space: RGB
(no packed pixel) or YCBCR422 (packed pixel).
Maciej Purski [Thu, 28 Jun 2018 16:44:01 +0000 (18:44 +0200)]
drm/bridge/sii8620: Send AVI infoframe in all MHL versions
Currently AVI infoframe is sent only in MHL3. However, some MHL2 dongles
need AVI infoframe to work correctly in either packed pixel mode or
non-packed pixel mode.
Send AVI infoframe in set_infoframes() in every case. Create an
infoframe using drm_hdmi_infoframe_from_display_mode() instead of
manually filling each infoframe structure's field.
A hooking API was implemented for 4.17 in fa93854f7a7ed63d followed
by hooks for Thinkpad laptops in 2801b9683f740012. The Thinkpad
drivers did not support the Thinkpad 13 and the hooking API crashes
on unsupported batteries by altering a list of hooks during unsafe
iteration. Thus, Thinkpad 13 laptops could no longer boot.
Additionally, a lock was kept in place and debugging information was
printed out of order.
Fixes: fa93854f7a7e (battery: Add the battery hooking API) Cc: 4.17+ <stable@vger.kernel.org> # 4.17+ Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Nicolai Hähnle [Fri, 29 Jun 2018 11:23:25 +0000 (13:23 +0200)]
drm/amdgpu: fix user fence write race condition
The buffer object backing the user fence is reserved using the non-user
fence, i.e., as soon as the non-user fence is signaled, the user fence
buffer object can be moved or even destroyed.
Therefore, emit the user fence first.
Both fences have the same cache invalidation behavior, so this should
have no user-visible effect.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Pavel Tatashin [Wed, 4 Jul 2018 00:02:53 +0000 (17:02 -0700)]
mm: teach dump_page() to correctly output poisoned struct pages
If struct page is poisoned, and uninitialized access is detected via
PF_POISONED_CHECK(page) dump_page() is called to output the page. But,
the dump_page() itself accesses struct page to determine how to print
it, and therefore gets into a recursive loop.
I could not find a function attribute that lets me disable
-fsanitize-coverage=trace-pc for just one function, so this turns it off
for the entire file instead.
Link: http://lkml.kernel.org/r/20180529103636.1535457-1-arnd@arndb.de Fixes: 758517202bd2e4 ("arm: port KCOV to arm") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Olof Johansson <olof@lixom.net> Tested-by: Olof Johansson <olof@lixom.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhen Lei [Wed, 4 Jul 2018 00:02:46 +0000 (17:02 -0700)]
kasan: fix shadow_size calculation error in kasan_module_alloc
There is a special case that the size is "(N << KASAN_SHADOW_SCALE_SHIFT)
Pages plus X", the value of X is [1, KASAN_SHADOW_SCALE_SIZE-1]. The
operation "size >> KASAN_SHADOW_SCALE_SHIFT" will drop X, and the
roundup operation can not retrieve the missed one page. For example:
size=0x28006, PAGE_SIZE=0x1000, KASAN_SHADOW_SCALE_SHIFT=3, we will get
shadow_size=0x5000, but actually we need 6 pages.
This can lead to a kernel crash when kasan is enabled and the value of
mod->core_layout.size or mod->init_layout.size is like above. Because
the shadow memory of X has not been allocated and mapped.
When booting with very large numbers of gigantic (i.e. 1G) pages, the
operations in the loop of gather_bootmem_prealloc, and specifically
prep_compound_gigantic_page, takes a very long time, and can cause a
softlockup if enough pages are requested at boot.
For example booting with 3844 1G pages requires prepping
(set_compound_head, init the count) over 1 billion 4K tail pages, which
takes considerable time.
Add a cond_resched() to the outer loop in gather_bootmem_prealloc() to
prevent this lockup.
Tested: Booted with softlockup_panic=1 hugepagesz=1G hugepages=3844 and
no softlockup is reported, and the hugepages are reported as
successfully setup.
Link: http://lkml.kernel.org/r/20180627214447.260804-1-cannonmatthews@google.com Signed-off-by: Cannon Matthews <cannonmatthews@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use huge_ptep_get() to translate huge ptes to normal ptes so we can
check them with the huge_pte_* functions. Otherwise some architectures
will check the wrong values and will not wait for userspace to bring in
the memory.
Link: http://lkml.kernel.org/r/20180626132421.78084-1-frankja@linux.ibm.com Fixes: 369cd2121be4 ("userfaultfd: hugetlbfs: userfaultfd_huge_must_wait for hugepmd ranges") Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changbin Du [Wed, 31 Jan 2018 15:48:49 +0000 (23:48 +0800)]
tracing: Fix missing return symbol in function_graph output
The function_graph tracer does not show the interrupt return marker for the
leaf entry. On leaf entries, we see an unbalanced interrupt marker (the
interrupt was entered, but nevern left).
Before:
1) | SyS_write() {
1) | __fdget_pos() {
1) 0.061 us | __fget_light();
1) 0.289 us | }
1) | vfs_write() {
1) 0.049 us | rw_verify_area();
1) + 15.424 us | __vfs_write();
1) ==========> |
1) 6.003 us | smp_apic_timer_interrupt();
1) 0.055 us | __fsnotify_parent();
1) 0.073 us | fsnotify();
1) + 23.665 us | }
1) + 24.501 us | }
After:
0) | SyS_write() {
0) | __fdget_pos() {
0) 0.052 us | __fget_light();
0) 0.328 us | }
0) | vfs_write() {
0) 0.057 us | rw_verify_area();
0) | __vfs_write() {
0) ==========> |
0) 8.548 us | smp_apic_timer_interrupt();
0) <========== |
0) + 36.507 us | } /* __vfs_write */
0) 0.049 us | __fsnotify_parent();
0) 0.066 us | fsnotify();
0) + 50.064 us | }
0) + 50.952 us | }
Link: http://lkml.kernel.org/r/1517413729-20411-1-git-send-email-changbin.du@intel.com Cc: stable@vger.kernel.org Fixes: f8b755ac8e0cc ("tracing/function-graph-tracer: Output arrows signal on hardirq call/return") Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Silence warnings (triggered at W=1) by adding relevant __printf attributes.
CC kernel/trace/trace.o
kernel/trace/trace.c: In function ‘__trace_array_vprintk’:
kernel/trace/trace.c:2979:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
len = vscnprintf(tbuffer, TRACE_BUF_SIZE, fmt, args);
^~~
AR kernel/trace/built-in.o
tracing: Make create_filter() code match the comments
The comment in create_filter() states that the passed in filter pointer
(filterp) will either be NULL or contain an error message stating why the
filter failed. But it also expects the filter pointer to point to NULL when
passed in. If it is not, the function create_filter_start() will warn and
return an error message without updating the filter pointer. This is not
what the comment states.
As we always expect the pointer to point to NULL, if it is not, trigger a
WARN_ON(), set it to NULL, and then continue the path as the rest will work
as the comment states. Also update the comment to state it must point to
NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
My networking merge (commit 4e33d7d47943: "Pull networking fixes from
David Miller") got the poll() handling conflict wrong for af_smc.
The conflict between my a11e1d432b51 ("Revert changes to convert to
->poll_mask() and aio IOCB_CMD_POLL") and Ursula Braun's 24ac3a08e658
("net/smc: rebuild nonblocking connect") should have left the call to
sock_poll_wait() in place, just without the socket lock release/retake.
And I really should have realized that. But happily, I at least asked
Ursula to double-check the merge, and she set me right.
This also fixes an incidental whitespace issue nearby that annoyed me
while looking at this.
Pointed-out-by: Ursula Braun <ubraun@linux.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ulf Hansson [Fri, 29 Jun 2018 09:15:37 +0000 (11:15 +0200)]
PM / Domains: Don't power on at attach for the multi PM domain case
There are no legacy behavior in drivers to consider while attaching a
device to genpd - for the multiple PM domain case.
For that reason, let's instead require the driver to runtime resume the
device, via calling pm_runtime_get_sync() for example, when it needs to
power on the corresponding PM domain.
This allows us to improve the situation during attach. Instead of always
power on the PM domain, which may be unnecessary, let's leave it in its
current state. Additionally, to avoid the PM domain to stay powered on,
let's schedule a power off work.
Fixes: 3c095f32a92b (PM / Domains: Add support for multi PM domains ...) Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Evan Green [Mon, 2 Jul 2018 23:03:46 +0000 (16:03 -0700)]
loop: Add LOOP_SET_BLOCK_SIZE in compat ioctl
This change adds LOOP_SET_BLOCK_SIZE as one of the supported ioctls
in lo_compat_ioctl. It only takes an unsigned long argument, and
in practice a 32-bit value works fine.
Chris Wilson [Sat, 30 Jun 2018 09:05:09 +0000 (10:05 +0100)]
drm/i915: Try GGTT mmapping whole object as partial
If the whole object is already pinned by HW for use as scanout, we will
fail to move it to the mappable region and so must resort to using a
partial VMA covering the whole object.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104513 Fixes: aa136d9d72c2 ("drm/i915: Convert partial ggtt vma to full ggtt if it spans the entire object") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180630090509.469-1-chris@chris-wilson.co.uk
(cherry picked from commit 7e7367d3bc6cf27dd7e007e7897fcebfeff1ee8b) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Sudeep Holla [Fri, 29 Jun 2018 16:17:57 +0000 (17:17 +0100)]
ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set
Currently, we use the ACPI processor ID only for the leaf/processor nodes
as the specification states it must match the value of the ACPI processor
ID field in the processor’s entry in the MADT.
However, if a PPTT structure represents a processors group, it
matches a processor container UID in the namespace and the
ACPI_PPTT_ACPI_PROCESSOR_ID_VALID flag indicates whether the
ACPI processor ID is valid.
Let's use UID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set to be
consistent instead of using table offset as it's currently done for
non-leaf nodes.
Fixes: 2bd00bcd73e5 (ACPI/PPTT: Add Processor Properties Topology Table parsing) Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Jeremy Linton <jeremy.linton@arm.com>
[ rjw: Changelog (minor) ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md
Pull MD fixes from Shaohua Li:
"Two small fixes for MD:
- an error handling fix from me
- a recover bug fix for raid10 from BingJing"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md/raid10: fix that replacement cannot complete recovery after reassemble
MD: cleanup resources in failure
1) Verify netlink attributes properly in nf_queue, from Eric Dumazet.
2) Need to bump memory lock rlimit for test_sockmap bpf test, from
Yonghong Song.
3) Fix VLAN handling in lan78xx driver, from Dave Stevenson.
4) Fix uninitialized read in nf_log, from Jann Horn.
5) Fix raw command length parsing in mlx5, from Alex Vesker.
6) Cleanup loopback RDS connections upon netns deletion, from Sowmini
Varadhan.
7) Fix regressions in FIB rule matching during create, from Jason A.
Donenfeld and Roopa Prabhu.
8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren.
9) More bpfilter build fixes/adjustments from Masahiro Yamada.
10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper
Dangaard Brouer.
11) fib_tests.sh file permissions were broken, from Shuah Khan.
12) Make sure BH/preemption is disabled in data path of mac80211, from
Denis Kenzior.
13) Don't ignore nla_parse_nested() return values in nl80211, from
Johannes berg.
14) Properly account sock objects ot kmemcg, from Shakeel Butt.
15) Adjustments to setting bpf program permissions to read-only, from
Daniel Borkmann.
16) TCP Fast Open key endianness was broken, it always took on the host
endiannness. Whoops. Explicitly make it little endian. From Yuching
Cheng.
17) Fix prefix route setting for link local addresses in ipv6, from
David Ahern.
18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva.
19) Various bpf sockmap fixes, from John Fastabend.
20) Use after free for GRO with ESP, from Sabrina Dubroca.
21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from
Eric Biggers.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
qede: Adverstise software timestamp caps when PHC is not available.
qed: Fix use of incorrect size in memcpy call.
qed: Fix setting of incorrect eswitch mode.
qed: Limit msix vectors in kdump kernel to the minimum required count.
ipvlan: call dev_change_flags when ipvlan mode is reset
ipv6: sr: fix passing wrong flags to crypto_alloc_shash()
net: fix use-after-free in GRO with ESP
tcp: prevent bogus FRTO undos with non-SACK flows
bpf: sockhash, add release routine
bpf: sockhash fix omitted bucket lock in sock_close
bpf: sockmap, fix smap_list_map_remove when psock is in many maps
bpf: sockmap, fix crash when ipv6 sock is added
net: fib_rules: bring back rule_exists to match rule during add
hv_netvsc: split sub-channel setup into async and sync
net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN
atm: zatm: Fix potential Spectre v1
s390/qeth: consistently re-enable device features
s390/qeth: don't clobber buffer on async TX completion
s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]
s390/qeth: fix race when setting MAC address
...
Michel Dänzer [Fri, 29 Jun 2018 14:27:10 +0000 (16:27 +0200)]
drm: Use kvzalloc for allocating blob property memory
The property size may be controlled by userspace, can be large (I've
seen failure with order 4, i.e. 16 pages / 64 KB) and doesn't need to be
physically contiguous.
Lars Ellenberg [Mon, 25 Jun 2018 09:39:52 +0000 (11:39 +0200)]
drbd: fix access after free
We have
struct drbd_requests { ... struct bio *private_bio; ... }
to hold a bio clone for local submission.
On local IO completion, we put that bio, and in case we want to use the
result later, we overload that member to hold the ERR_PTR() of the
completion result,
Which, before v4.3, used to be the passed in "int error",
so we could first bio_put(), then assign.
v4.3-rc1~100^2~21 4246a0b63bd8 block: add a bi_error field to struct bio
changed that:
bio_put(req->private_bio);
- req->private_bio = ERR_PTR(error);
+ req->private_bio = ERR_PTR(bio->bi_error);
Which introduces an access after free,
because it was non obvious that req->private_bio == bio.
Impact of that was mostly unnoticable, because we only use that value
in a multiple-failure case, and even then map any "unexpected" error
code to EIO, so worst case we could potentially mask a more specific
error with EIO in a multiple failure case.
Unless the pointed to memory region was unmapped, as is the case with
CONFIG_DEBUG_PAGEALLOC, in which case this results in
BUG: unable to handle kernel paging request
v4.13-rc1~70^2~75 4e4cbee93d56 block: switch bios to blk_status_t
changes it further to
bio_put(req->private_bio);
req->private_bio = ERR_PTR(blk_status_to_errno(bio->bi_status));
And blk_status_to_errno() now contains a WARN_ON_ONCE() for unexpected
values, which catches this "sometimes", if the memory has been reused
quickly enough for other things.
Should also go into stable since 4.3, with the trivial change around 4.13.
Cc: stable@vger.kernel.org Fixes: 4246a0b63bd8 block: add a bi_error field to struct bio Reported-by: Sarah Newman <srn@prgmr.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
qede: Adverstise software timestamp caps when PHC is not available.
When ptp clock is not available for a PF (e.g., higher PFs in NPAR mode),
get-tsinfo() callback should return the software timestamp capabilities
instead of returning the error.
Fixes: 4c55215c ("qede: Add driver support for PTP") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Use the correct size value while copying chassis/port id values.
Fixes: 6ad8c632e ("qed: Add support for query/config dcbx.") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
By default, driver sets the eswitch mode incorrectly as VEB (virtual
Ethernet bridging).
Need to set VEB eswitch mode only when sriov is enabled, and it should be
to set NONE by default. The patch incorporates this change.
Fixes: 0fefbfbaa ("qed*: Management firmware - notifications and defaults") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
qed: Limit msix vectors in kdump kernel to the minimum required count.
Memory size is limited in the kdump kernel environment. Allocation of more
msix-vectors (or queues) consumes few tens of MBs of memory, which might
lead to the kdump kernel failure.
This patch adds changes to limit the number of MSI-X vectors in kdump
kernel to minimum required value (i.e., 2 per engine).
Fixes: fe56b9e6a ("qed: Add module with basic common support") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Sun, 1 Jul 2018 08:21:21 +0000 (16:21 +0800)]
ipvlan: call dev_change_flags when ipvlan mode is reset
After we change the ipvlan mode from l3 to l2, or vice versa, we only
reset IFF_NOARP flag, but don't flush the ARP table cache, which will
cause eth->h_dest to be equal to eth->h_source in ipvlan_xmit_mode_l2().
Then the message will not come out of host.
Here is the reproducer on local host:
ip link set eth1 up
ip addr add 192.168.1.1/24 dev eth1
ip link add link eth1 ipvlan1 type ipvlan mode l3
ip netns add net1
ip link set ipvlan1 netns net1
ip netns exec net1 ip link set ipvlan1 up
ip netns exec net1 ip addr add 192.168.2.1/24 dev ipvlan1
ip route add 192.168.2.0/24 via 192.168.1.2
ping 192.168.2.2 -c 2
ip netns exec net1 ip link set ipvlan1 type ipvlan mode l2
ping 192.168.2.2 -c 2
Add the same configuration on remote host. After we set the mode to l2,
we could find that the src/dst MAC addresses are the same on eth1:
Fix this by calling dev_change_flags(), which will call netdevice notifier
with flag change info.
v2:
a) As pointed out by Wang Cong, check return value for dev_change_flags() when
change dev flags.
b) As suggested by Stefano and Sabrina, move flags setting before l3mdev_ops.
So we don't need to redo ipvlan_{, un}register_nf_hook() again in err path.
Reported-by: Jianlin Shi <jishi@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Fixes: 2ad7bf3638411 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Biggers [Sat, 30 Jun 2018 22:26:56 +0000 (15:26 -0700)]
ipv6: sr: fix passing wrong flags to crypto_alloc_shash()
The 'mask' argument to crypto_alloc_shash() uses the CRYPTO_ALG_* flags,
not 'gfp_t'. So don't pass GFP_KERNEL to it.
Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Sat, 30 Jun 2018 15:38:55 +0000 (17:38 +0200)]
net: fix use-after-free in GRO with ESP
Since the addition of GRO for ESP, gro_receive can consume the skb and
return -EINPROGRESS. In that case, the lower layer GRO handler cannot
touch the skb anymore.
Commit 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") converted
some of the gro_receive handlers that can lead to ESP's gro_receive so
that they wouldn't access the skb when -EINPROGRESS is returned, but
missed other spots, mainly in tunneling protocols.
This patch finishes the conversion to using skb_gro_flush_final(), and
adds a new helper, skb_gro_flush_final_remcsum(), used in VXLAN and
GUE.
Fixes: 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Farman [Fri, 29 Jun 2018 17:54:01 +0000 (19:54 +0200)]
s390/mm: fix refcount usage for 4K pgste
s390 no longer uses the _mapcount field in struct page to identify
the page table format being used. While the code was diligent in handling
the different mappings, it neglected to turn "off" the map bits when
alloc_pgste was being used. This resulted in bits remaining "on" in the
_refcount field, and thus an artifically huge "in use" count that prevents
the pages from actually being released by __free_page.
There's opportunity for improvement in the "1 vs 3" vs "1U vs 3U" vs
"0x1 vs 0x11" etc. variations for all these calls, I am just keeping
things simple compared to neighboring code.
Fixes: 620b4e903179 ("s390: use _refcount for pgtables") Reported-by: Halil Pasic <pasic@linux.ibm.com> Bisected-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Stefan Haberland [Tue, 12 Jun 2018 14:47:10 +0000 (16:47 +0200)]
s390/dasd: reduce the default queue depth and nr of hardware queues
Reduce the default values for the number of hardware queues and queue depth
to significantly reduce the memory footprint of a DASD device.
The memory consumption per DASD device reduces from approximately 40MB to
approximately 1.5MB.
This is necessary to build systems with a large number of DASD devices and
a reasonable amount of memory.
Performance measurements showed that good performance results are possible
with the new default values even on systems with lots of CPUs and lots of
alias devices.
Fixes: e443343e509a ("s390/dasd: blk-mq conversion") Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Xiaolin Zhang [Thu, 21 Jun 2018 06:33:43 +0000 (14:33 +0800)]
drm/i915/gvt: changed DDI mode emulation type
changed gvt display transcode DDI mode from DP_SST to
DVI to address below calltrace issue during guest booting
up which is caused by zero dotclock initial value with DP_SST
mode. transcode DVI mode emulation also align with native with DP
connection.
Zhao Yan [Tue, 19 Jun 2018 07:44:11 +0000 (15:44 +0800)]
drm/i915/gvt: fix a bug of partially write ggtt enties
when guest writes ggtt entries, it could write 8 bytes a time if
gtt_entry_size is 8. But, qemu could split the 8 bytes into 2 consecutive
4-byte writes.
If each 4-byte partial write could trigger a host ggtt write, it is very
possible that a wrong combination is written to the host ggtt. E.g.
the higher 4 bytes is the old value, but the lower 4 bytes is the new
value, and this 8-byte combination is wrong but written to the ggtt, thus
causing bugs.
To handle this condition, we just record the first 4-byte write, then wait
until the second 4-byte write comes and write the combined 64-bit data to
host ggtt table.
To save memory space and to spot partial write as early as possible, we
don't keep this information for every ggtt index. Instread, we just record
the last ggtt write position, and assume the two 4-byte writes come in
consecutively for each vgpu.
This assumption is right based on the characteristic of ggtt entry which
stores memory address. When gtt_entry_size is 8, the guest memory physical
address should be 64 bits, so any sane guest driver should write 8-byte
long data at a time, so 2 consecutive 4-byte writes at the same ggtt index
should be trapped in gvt.
v2:
when incomplete ggtt entry write is located, e.g.
1. guest only writes 4 bytes at a ggtt offset and no long writes the
rest 4 bytes.
2. guest writes 4 bytes of a ggtt offset, then write at other ggtt
offsets, then return back to write the left 4 bytes of the first
ggtt offset.
add error handling logic to remap host entry to scratch page, and mark
guest virtual ggtt entry as not present. (zhenyu wang)
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
drm/exynos: Replace drm_dev_unref with drm_dev_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net> Signed-off-by: Inki Dae <inki.dae@samsung.com>
drm/exynos: Replace drm_gem_object_unreference_unlocked with put function
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net> Signed-off-by: Inki Dae <inki.dae@samsung.com>
drm/exynos: Replace drm_framebuffer_{un/reference} with put,get functions
This patch unifies the naming of DRM functions for reference counting
of struct drm_framebuffer. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fix by calling pgtable_page_dtor() in our __pte_free_tlb() code path,
so that the PG_table flag is cleared before we free the pte page.
Note that I had to change the type of pte_free() to be static from
extern. Otherwise you get a lot of warnings like this:
./arch/m68k/include/asm/mcf_pgalloc.h:80:2: warning: ‘pgtable_page_dtor’ is static but used in inline function ‘pte_free’ which is not static
pgtable_page_dtor(page);
^
And making it static is consistent with our use of this in the other
m68k pgalloc definitions of pte_free().
Merge tag 'for-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We have a few regression fixes for qgroup rescan status tracking and
the vm_fault_t conversion that mixed up the error values"
* tag 'for-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix mount failure when qgroup rescan is in progress
Btrfs: fix regression in btrfs_page_mkwrite() from vm_fault_t conversion
btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fix from Al Viro:
"Followup to procfs-seq_file series this window"
This fixes a memory leak by making sure that proc seq files release any
private data on close. The 'proc_seq_open' has to be properly paired
with 'proc_seq_release' that releases the extra private data.
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
proc: add proc_seq_release
Merge tag 'staging-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are a few small staging and IIO driver fixes for 4.18-rc3.
Nothing major or big, all just fixes for reported problems since
4.18-rc1. All of these have been in linux-next this week with no
reported problems"
* tag 'staging-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: android: ion: Return an ERR_PTR in ion_map_kernel
staging: comedi: quatech_daqp_cs: fix no-op loop daqp_ao_insn_write()
iio: imu: inv_mpu6050: Fix probe() failure on older ACPI based machines
iio: buffer: fix the function signature to match implementation
iio: mma8452: Fix ignoring MMA8452_INT_DRDY
iio: tsl2x7x/tsl2772: avoid potential division by zero
iio: pressure: bmp280: fix relative humidity unit
Merge tag 'tty-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are five fixes for the tty core and some serial drivers.
The tty core ones fix some security and other issues reported by the
syzbot that I have taken too long in responding to (sorry Tetsuo!).
The 8350 serial driver fix resolves an issue of devices that used to
work properly stopping working as they shouldn't have been added to a
blacklist.
All of these have been in linux-next for a few days with no reported
issues"
* tag 'tty-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: prevent leaking uninitialized data to userspace via /dev/vcs*
serdev: fix memleak on module unload
serial: 8250_pci: Remove stalled entries in blacklist
n_tty: Access echo_* variables carefully.
n_tty: Fix stall at n_tty_receive_char_special().
Merge tag 'usb-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here is a number of USB gadget and other driver fixes for 4.18-rc3.
There's a bunch of them here, most of them being gadget driver and
xhci host controller fixes for reported issues (as normal), but there
are also some new device ids, and some fixes for the typec code.
There is an acpi core patch in here that was acked by the acpi
maintainer as it is needed for the typec fixes in order to properly
solve a problem in that driver.
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
usb: chipidea: host: fix disconnection detect issue
usb: typec: tcpm: fix logbuffer index is wrong if _tcpm_log is re-entered
typec: tcpm: Fix a msecs vs jiffies bug
NFC: pn533: Fix wrong GFP flag usage
usb: cdc_acm: Add quirk for Uniden UBC125 scanner
staging/typec: fix tcpci_rt1711h build errors
usb: typec: ucsi: Fix for incorrect status data issue
usb: typec: ucsi: acpi: Workaround for cache mode issue
acpi: Add helper for deactivating memory region
usb: xhci: increase CRS timeout value
usb: xhci: tegra: fix runtime PM error handling
usb: xhci: remove the code build warning
xhci: Fix kernel oops in trace_xhci_free_virt_device
xhci: Fix perceived dead host due to runtime suspend race with event handler
dwc2: gadget: Fix ISOC IN DDMA PID bitfield value calculation
usb: gadget: dwc2: fix memory leak in gadget_init()
usb: gadget: composite: fix delayed_status race condition when set_interface
usb: dwc2: fix isoc split in transfer with no data
usb: dwc2: alloc dma aligned buffer for isoc split in
usb: dwc2: fix the incorrect bitmaps for the ports of multi_tt hub
...
Ilpo Järvinen [Fri, 29 Jun 2018 10:07:53 +0000 (13:07 +0300)]
tcp: prevent bogus FRTO undos with non-SACK flows
If SACK is not enabled and the first cumulative ACK after the RTO
retransmission covers more than the retransmitted skb, a spurious
FRTO undo will trigger (assuming FRTO is enabled for that RTO).
The reason is that any non-retransmitted segment acknowledged will
set FLAG_ORIG_SACK_ACKED in tcp_clean_rtx_queue even if there is
no indication that it would have been delivered for real (the
scoreboard is not kept with TCPCB_SACKED_ACKED bits in the non-SACK
case so the check for that bit won't help like it does with SACK).
Having FLAG_ORIG_SACK_ACKED set results in the spurious FRTO undo
in tcp_process_loss.
We need to use more strict condition for non-SACK case and check
that none of the cumulatively ACKed segments were retransmitted
to prove that progress is due to original transmissions. Only then
keep FLAG_ORIG_SACK_ACKED set, allowing FRTO undo to proceed in
non-SACK case.
(FLAG_ORIG_SACK_ACKED is planned to be renamed to FLAG_ORIG_PROGRESS
to better indicate its purpose but to keep this change minimal, it
will be done in another patch).
Besides burstiness and congestion control violations, this problem
can result in RTO loop: When the loss recovery is prematurely
undoed, only new data will be transmitted (if available) and
the next retransmission can occur only after a new RTO which in case
of multiple losses (that are not for consecutive packets) requires
one RTO per loss to recover.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Tested-by: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Originally in patch e6d20c55a4 ("openrisc: entry: Fix delay slot
detection") I fixed delay slot detection, but only for QEMU. We missed
that hardware delay slot detection using delay slot exception flag (DSX)
was still broken. This was because QEMU set the DSX flag in both
pre-exception supervision register (ESR) and supervision register (SR)
register, but on real hardware the DSX flag is only set on the SR
register during exceptions.
Fix this by carrying the DSX flag into the SR register during exception.
We also update the DSX flag read locations to read the value from the SR
register not the pt_regs SR register which represents ESR. The ESR
should never have the DSX flag set.
In the process I updated/removed a few comments to match the current
state. Including removing a comment saying that the DSX detection logic
was inefficient and needed to be rewritten.
I have tested this on QEMU with a patch ensuring it matches the hardware
specification.
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) A bpf_fib_lookup() helper fix to change the API before freeze to
return an encoding of the FIB lookup result and return the nexthop
device index in the params struct (instead of device index as return
code that we had before), from David.
2) Various BPF JIT fixes to address syzkaller fallout, that is, do not
reject progs when set_memory_*() fails since it could still be RO.
Also arm32 JIT was not using bpf_jit_binary_lock_ro() API which was
an issue, and a memory leak in s390 JIT found during review, from
Daniel.
3) Multiple fixes for sockmap/hash to address most of the syzkaller
triggered bugs. Usage with IPv6 was crashing, a GPF in bpf_tcp_close(),
a missing sock_map_release() routine to hook up to callbacks, and a
fix for an omitted bucket lock in sock_close(), from John.
4) Two bpftool fixes to remove duplicated error message on program load,
and another one to close the libbpf object after program load. One
additional fix for nfp driver's BPF offload to avoid stopping offload
completely if replace of program failed, from Jakub.
5) Couple of BPF selftest fixes that bail out in some of the test
scripts if the user does not have the right privileges, from Jeffrin.
6) Fixes in test_bpf for s390 when CONFIG_BPF_JIT_ALWAYS_ON is set
where we need to set the flag that some of the test cases are expected
to fail, from Kleber.
7) Fix to detangle BPF_LIRC_MODE2 dependency from CONFIG_CGROUP_BPF
since it has no relation to it and lirc2 users often have configs
without cgroups enabled and thus would not be able to use it, from Sean.
8) Fix a selftest failure in sockmap by removing a useless setrlimit()
call that would set a too low limit where at the same time we are
already including bpf_rlimit.h that does the job, from Yonghong.
9) Fix BPF selftest config with missing missing NET_SCHED, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Sat, 30 Jun 2018 23:21:32 +0000 (01:21 +0200)]
Merge branch 'bpf-sockmap-fixes'
John Fastabend says:
====================
This addresses two syzbot issues that lead to identifying (by Eric and
Wei) a class of bugs where we don't correctly check for IPv4/v6
sockets and their associated state. The second issue was a locking
omission in sockhash.
The first patch addresses IPv6 socks and fixing an error where
sockhash would overwrite the prot pointer with IPv4 prot. To fix
this build similar solution to TLS ULP. Although we continue to
allow socks in all states not just ESTABLISH in this patch set
because as Martin points out there should be no issue with this
on the sockmap ULP because we don't use the ctx in this code. Once
multiple ULPs coexist we may need to revisit this. However we
can do this in *next trees.
The other issue syzbot found that the tcp_close() handler missed
locking the hash bucket lock which could result in corrupting the
sockhash bucket list if delete and close ran at the same time.
And also the smap_list_remove() routine was not working correctly
at all. This was not caught in my testing because in general my
tests (to date at least lets add some more robust selftest in
bpf-next) do things in the "expected" order, create map, add socks,
delete socks, then tear down maps. The tests we have that do the
ops out of this order where only working on single maps not multi-
maps so we never saw the issue. Thanks syzbot. The fix is to
restructure the tcp_close() lock handling. And fix the obvious
bug in smap_list_remove().
Finally, during review I noticed the release handler was omitted
from the upstream code (patch 4) due to an incorrect merge conflict
fix when I ported the code to latest bpf-next before submitting.
This would leave references to the map around if the user never
closes the map.
v3: rework patches, dropping ESTABLISH check and adding rcu
annotation along with the smap_list_remove fix
v4: missed one more case where maps was being accessed without
the sk_callback_lock, spoted by Martin as well.
v5: changed to use a specific lock for maps and reduced callback
lock so that it is only used to gaurd sk callbacks. I think
this makes the logic a bit cleaner and avoids confusion
ovoer what each lock is doing.
Also big thanks to Martin for thorough review he caught at least
one case where I missed a rcu_call().
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
John Fastabend [Sat, 30 Jun 2018 13:17:47 +0000 (06:17 -0700)]
bpf: sockhash fix omitted bucket lock in sock_close
First the sk_callback_lock() was being used to protect both the
sock callback hooks and the psock->maps list. This got overly
convoluted after the addition of sockhash (in sockmap it made
some sense because masp and callbacks were tightly coupled) so
lets split out a specific lock for maps and only use the callback
lock for its intended purpose. This fixes a couple cases where
we missed using maps lock when it was in fact needed. Also this
makes it easier to follow the code because now we can put the
locking closer to the actual code its serializing.
Next, in sock_hash_delete_elem() the pattern was as follows,
sock_hash_delete_elem()
[...]
spin_lock(bucket_lock)
l = lookup_elem_raw()
if (l)
hlist_del_rcu()
write_lock(sk_callback_lock)
.... destroy psock ...
write_unlock(sk_callback_lock)
spin_unlock(bucket_lock)
The ordering is necessary because we only know the {p}sock after
dereferencing the hash table which we can't do unless we have the
bucket lock held. Once we have the bucket lock and the psock element
it is deleted from the hashmap to ensure any other path doing a lookup
will fail. Finally, the refcnt is decremented and if zero the psock
is destroyed.
In parallel with the above (or free'ing the map) a tcp close event
may trigger tcp_close(). Which at the moment omits the bucket lock
altogether (oops!) where the flow looks like this,
bpf_tcp_close()
[...]
write_lock(sk_callback_lock)
for each psock->maps // list of maps this sock is part of
hlist_del_rcu(ref_hash_node);
.... destroy psock ...
write_unlock(sk_callback_lock)
Obviously, and demonstrated by syzbot, this is broken because
we can have multiple threads deleting entries via hlist_del_rcu().
To fix this we might be tempted to wrap the hlist operation in a
bucket lock but that would create a lock inversion problem. In
summary to follow locking rules the psocks maps list needs the
sk_callback_lock (after this patch maps_lock) but we need the bucket
lock to do the hlist_del_rcu.
To resolve the lock inversion problem pop the head of the maps list
repeatedly and remove the reference until no more are left. If a
delete happens in parallel from the BPF API that is OK as well because
it will do a similar action, lookup the lock in the map/hash, delete
it from the map/hash, and dec the refcnt. We check for this case
before doing a destroy on the psock to ensure we don't have two
threads tearing down a psock. The new logic is as follows,
bpf_tcp_close()
e = psock_map_pop(psock->maps) // done with map lock
bucket_lock() // lock hash list bucket
l = lookup_elem_raw(head, hash, key, key_size);
if (l) {
//only get here if elmnt was not already removed
hlist_del_rcu()
... destroy psock...
}
bucket_unlock()
And finally for all the above to work add missing locking around map
operations per above. Then add RCU annotations and use
rcu_dereference/rcu_assign_pointer to manage values relying on RCU so
that the object is not free'd from sock_hash_free() while it is being
referenced in bpf_tcp_close().
Reported-by: syzbot+0ce137753c78f7b6acc1@syzkaller.appspotmail.com Fixes: 81110384441a ("bpf: sockmap, add hash map support") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
John Fastabend [Sat, 30 Jun 2018 13:17:41 +0000 (06:17 -0700)]
bpf: sockmap, fix smap_list_map_remove when psock is in many maps
If a hashmap is free'd with open socks it removes the reference to
the hash entry from the psock. If that is the last reference to the
psock then it will also be free'd by the reference counting logic.
However the current logic that removes the hash reference from the
list of references is broken. In smap_list_remove() we first check
if the sockmap entry matches and then check if the hashmap entry
matches. But, the sockmap entry sill always match because its NULL in
this case which causes the first entry to be removed from the list.
If this is always the "right" entry (because the user adds/removes
entries in order) then everything is OK but otherwise a subsequent
bpf_tcp_close() may reference a free'd object.
To fix this create two list handlers one for sockmap and one for
sockhash.
Reported-by: syzbot+0ce137753c78f7b6acc1@syzkaller.appspotmail.com Fixes: 81110384441a ("bpf: sockmap, add hash map support") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
John Fastabend [Sat, 30 Jun 2018 13:17:36 +0000 (06:17 -0700)]
bpf: sockmap, fix crash when ipv6 sock is added
This fixes a crash where we assign tcp_prot to IPv6 sockets instead
of tcpv6_prot.
Previously we overwrote the sk->prot field with tcp_prot even in the
AF_INET6 case. This patch ensures the correct tcp_prot and tcpv6_prot
are used.
Tested with 'netserver -6' and 'netperf -H [IPv6]' as well as
'netperf -H [IPv4]'. The ESTABLISHED check resolves the previously
crashing case here.
Fixes: 174a79ff9515 ("bpf: sockmap with sk redirect support") Reported-by: syzbot+5c063698bdbfac19f363@syzkaller.appspotmail.com Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 5088814a6e93 (ACPICA: AML parser: attempt to continue loading
table after error) unintentionally added leading newlines to error
messages emitted by ACPICA which caused unexpected things to be
printed to the kernel log. Drop these newlines (which effectively
reverts the part of commit 5088814a6e93 adding them).
Fixes: 5088814a6e93 (ACPICA: AML parser: attempt to continue loading table after error) Reported-by: Toralf Förster <toralf.foerster@gmx.de> Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: 4.17+ <stable@vger.kernel.org> # 4.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is reported that commit c62ec4610c40 (PM / core: Fix direct_complete
handling for devices with no callbacks) introduced a system suspend
regression on Samsung 305V4A by allowing a PCI bridge (not a PCIe
port) to stay in D3 over suspend-to-RAM, which is a side effect of
setting power.direct_complete for the children of that bridge that
have no PM callbacks.
On the majority of systems PCI bridges are not allowed to be
runtime-suspended (the power/control sysfs attribute is set to "on"
for them by default), but user space can change that setting and if
it does so and a given bridge has no children with PM callbacks, the
direct_complete optimization will be applied to it and it will stay
in suspend over system suspend. Apparently, that confuses the
platform firmware on the affected machine and that may very well
happen elsewhere, so avoid the direct_complete optimization for
PCI bridges with no drivers (if there is a driver, it should take
care of the PM handling) on suspend-to-RAM altogether (that should
not matter for suspend-to-idle as platform firmware is not involved
in it).
Fixes: c62ec4610c40 (PM / core: Fix direct_complete handling for devices with no callbacks) Link: https://bugzilla.kernel.org/show_bug.cgi?id=199941 Reported-by: n0000b.n000b@gmail.com Tested-by: n0000b.n000b@gmail.com Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: 4.15+ <stable@vger.kernel.org> # 4.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
projects / mirror_ubuntu-eoan-kernel.git / log