]> git.proxmox.com Git - mirror_ubuntu-kernels.git/log
mirror_ubuntu-kernels.git
14 years agoARM: 6205/1: perf: ensure counter delta is treated as unsigned
Will Deacon [Fri, 2 Jul 2010 15:41:52 +0000 (16:41 +0100)]
ARM: 6205/1: perf: ensure counter delta is treated as unsigned

Hardware performance counters on ARM are 32-bits wide but atomic64_t
variables are used to represent counter data in the hw_perf_event structure.

The armpmu_event_update function right-shifts a signed 64-bit delta variable
and adds the result to the event count. This can lead to shifting in sign-bits
if the MSB of the 32-bit counter value is set. This results in perf output
such as:

 Performance counter stats for 'sleep 20':

 18446744073460670464  cycles             <-- 0xFFFFFFFFF12A6000
        7783773  instructions             #      0.000 IPC
            465  context-switches
            161  page-faults
        1172393  branches

   20.154242147  seconds time elapsed

This patch ensures that the delta value is treated as unsigned so that the
right shift sets the upper bits to zero.

Cc: <stable@kernel.org>
Acked-by: Jamie Iles <jamie.iles@picochip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
14 years agoARM: 6202/1: Do not ARM_DMA_MEM_BUFFERABLE on RealView boards with L210/L220
Catalin Marinas [Thu, 1 Jul 2010 12:22:48 +0000 (13:22 +0100)]
ARM: 6202/1: Do not ARM_DMA_MEM_BUFFERABLE on RealView boards with L210/L220

RealView boards with certain revisions of the L210/L220 cache controller
may have issues (hardware deadlock) with the mandatory barriers (DSB
followed by an L2 cache sync) when ARM_DMA_MEM_BUFFERABLE is enabled.
The patch disables ARM_DMA_MEM_BUFFERABLE for these boards.

Tested-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
14 years agoARM: 6201/1: RealView: Do not use outer_sync() on ARM11MPCore boards with L220
Catalin Marinas [Thu, 1 Jul 2010 12:21:47 +0000 (13:21 +0100)]
ARM: 6201/1: RealView: Do not use outer_sync() on ARM11MPCore boards with L220

RealView boards with certain revisions of the L220 cache controller (ARM11*
processors only) may have issues (hardware deadlock) with the recent changes to
the mb() barrier implementation (DSB followed by an L2 cache sync). The patch
redefines the RealView ARM11MPCore mandatory barriers without the outer_sync()
call.

Cc: <stable@kernel.org>
Tested-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
14 years agoMerge branch 'imx-for-2.6.35' of git://git.pengutronix.de/git/imx/linux-2.6
Russell King [Thu, 1 Jul 2010 10:01:33 +0000 (11:01 +0100)]
Merge branch 'imx-for-2.6.35' of git://git.pengutronix.de/git/imx/linux-2.6

14 years agoMerge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
Russell King [Thu, 1 Jul 2010 09:16:00 +0000 (10:16 +0100)]
Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6

14 years agoARM: 6195/1: OMAP3: pmu: make CPU_HAS_PMU dependent on OMAP3_EMU
Will Deacon [Mon, 21 Jun 2010 14:32:54 +0000 (15:32 +0100)]
ARM: 6195/1: OMAP3: pmu: make CPU_HAS_PMU dependent on OMAP3_EMU

CPU performance event counters on v7 cores will only operate
if either the NIDEN or DBGEN signals are driven high.

For the OMAP3 platform, these signals are driven low by default
but DBGEN can be asserted by selecting the OMAP3_EMU Kconfig option,
which enables the virtual clock for hardware debugging peripherals.

Acked-by: Jean Pihet <jpihet@mvista.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
14 years agoARM: 6194/1: change definition of cpu_relax() for ARM11MPCore
Will Deacon [Mon, 21 Jun 2010 14:29:03 +0000 (15:29 +0100)]
ARM: 6194/1: change definition of cpu_relax() for ARM11MPCore

Linux expects that if a CPU modifies a memory location, then that
modification will eventually become visible to other CPUs in the system.

On an ARM11MPCore processor, loads are prioritised over stores so it is
possible for a store operation to be postponed if a polling loop immediately
follows it. If the variable being polled indirectly depends on the outstanding
store [for example, another CPU may be polling the variable that is pending
modification] then there is the potential for deadlock if interrupts are
disabled. This deadlock occurs in the KGDB testsuire when executing on an
SMP ARM11MPCore configuration.

This patch changes the definition of cpu_relax() to smp_mb() for ARMv6 cores,
forcing a flushing of the write buffer on SMP systems before the next load
takes place. If the Kernel is not compiled for SMP support, this will expand
to a barrier() as before.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
14 years agoARM: 6193/1: RealView: Align the machine_desc.phys_io to 1MB section
Catalin Marinas [Mon, 21 Jun 2010 14:12:40 +0000 (15:12 +0100)]
ARM: 6193/1: RealView: Align the machine_desc.phys_io to 1MB section

When not aligned, random bits could be written in the initial page table
by the __create_page_tables() function.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
14 years agoARM: 6192/1: VExpress: Align the machine_desc.phys_io to 1MB section
Catalin Marinas [Mon, 21 Jun 2010 14:12:09 +0000 (15:12 +0100)]
ARM: 6192/1: VExpress: Align the machine_desc.phys_io to 1MB section

When not aligned, random bits could be written in the initial page table
by the __create_page_tables() function.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
14 years agoARM: 6188/1: Add a config option for the ARM11MPCore DMA cache maintenance workaround
Catalin Marinas [Mon, 21 Jun 2010 14:10:07 +0000 (15:10 +0100)]
ARM: 6188/1: Add a config option for the ARM11MPCore DMA cache maintenance workaround

Commit f4d6477f introduced a workaround for the lack of hardware
broadcasting of the cache maintenance operations on ARM11MPCore.
However, the workaround is only valid on CPUs that do not do speculative
loads into the D-cache.

This patch adds a Kconfig option with the corresponding help to make the
above clear. When the DMA_CACHE_RWFO option is disabled, the kernel
behaviour is that prior to the f4d6477f commit. This also allows ARMv6
UP processors with speculative loads to work correctly.

For other processors, a different workaround may be needed.

Cc: Ronen Shitrit <rshitrit@marvell.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
14 years agoARM: 6187/1: The v6_dma_inv_range() function must preserve data on SMP
Catalin Marinas [Mon, 21 Jun 2010 14:09:36 +0000 (15:09 +0100)]
ARM: 6187/1: The v6_dma_inv_range() function must preserve data on SMP

A recent patch for DMA cache maintenance on ARM11MPCore added a write
for ownership trick to the v6_dma_inv_range() function. Such operation
destroys data already present in the buffer. However, this function is
used with with dma_sync_single_for_device() which is supposed to
preserve the existing data transfered into the buffer. This patch adds a
combination of read/write for ownership to preserve the original data.

Reported-by: Ronen Shitrit <rshitrit@marvell.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
14 years agoARM: 6186/1: Avoid the CONSISTENT_DMA_SIZE warning on noMMU builds
Catalin Marinas [Mon, 21 Jun 2010 14:09:06 +0000 (15:09 +0100)]
ARM: 6186/1: Avoid the CONSISTENT_DMA_SIZE warning on noMMU builds

This macro is not defined when !CONFIG_MMU so this patch moves the
CONSISTENT_* definitions to the CONFIG_MMU section.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
14 years agoARM: mx3: mx31lilly: fix build error for !CONFIG_USB_ULPI
Daniel Mack [Tue, 25 May 2010 14:46:55 +0000 (16:46 +0200)]
ARM: mx3: mx31lilly: fix build error for !CONFIG_USB_ULPI

arch/arm/mach-mx3/built-in.o: In function `mx31lilly_board_init':
mach-kzm_arm11_01.c:(.init.text+0x674): undefined reference to `otg_ulpi_create'
mach-kzm_arm11_01.c:(.init.text+0x68c): undefined reference to `otg_ulpi_create'
mach-kzm_arm11_01.c:(.init.text+0x744): undefined reference to `mxc_ulpi_access_ops'
make: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
Linus Torvalds [Wed, 30 Jun 2010 22:45:59 +0000 (15:45 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: rtl8192u_usb: Add LG device ID 043e:7a01
  Staging: rtl8192s_usb: Remove duplicate device ID
  Staging: rt2870: add device id for Zyxel NWD-270N
  Staging: comedi: fix read past end of array in cb_pcidda_attach()
  Staging: rtl8192su: add device ids
  Staging: rtl8192su: remove device ids
  Staging: rtl8187se: Fix compile warnings in 2.6.35-rc2
  Staging: wlags49_h2: Fix build error when CONFIG_SYSFS is not set
  Staging: wlags49_h2: add missing <linux/string.h> for strlen
  Staging: hv: fix hv_utils module to properly autoload
  staging: hv: Fix race condition on vmbus channel initialization
  Staging: comedi: drivers: adl_pci9111: Fix AI commands in TRIG_FOLLOW case
  Staging: mrst-touchscreen: fix dereferencing free memory
  Staging: batman-adv: fix function prototype
  Staging: batman-adv: return -EFAULT on copy_to_user errors
  staging: usbip: usbip_common: kill rx thread on tx thread creation error.

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Wed, 30 Jun 2010 22:45:28 +0000 (15:45 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (22 commits)
  USB: gadget: f_mass_storage: stale common->fsg value bug fix
  USB: gadget: f_mass_storage: fixed fs descriptors not being updated
  USB: musb: Enable the maximum supported burst mode for DMA
  USB: musb: fix Blackfin ulpi stubs
  USB: MUSB: make non-OMAP platforms build with CONFIG_PM=y
  USB: musb_core: make disconnect and suspend interrupts work again
  USB: obey the sysfs power/wakeup setting
  USB: gadget eth: Fix calculate CRC32 in EEM
  USB: qcserial: fix a memory leak in qcprobe error path
  USB: gadget/printer, fix sleep inside atomic
  USB: isp1362-hcd, fix double lock
  USB: serial: ftdi: correct merge conflict with CONTEC id
  USB: fix oops in usb_sg_init()
  USB: s3c2410: deactivate endpoints before gadget unbinding
  USB: ehci-mxc: bail out on transceiver problems
  USB: otg/ulpi: bail out on read errors
  usb: musb: Fix a bug by making suspend interrupt available in device mode
  USB: r8a66597: Fix failure in change of status
  USB: xHCI: Fix bug in link TRB activation change.
  USB: gadget: g_fs: possible invalid pointer reference bug fixed
  ...

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
Linus Torvalds [Wed, 30 Jun 2010 22:45:06 +0000 (15:45 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  serial: cpm_uart: implement the cpm_uart_early_write() function for console poll

14 years agoMerge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 30 Jun 2010 22:44:21 +0000 (15:44 -0700)]
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP: hwmod: Fix the missing braces
  OMAP4: clock: Fix multi-omap boot with reset un-used clocks
  OMAP3: PM: fix IO daisy chain enable to use PM_WKEN reg
  omap: GPIO: fix auto-disable of debounce clock
  omap: DMTIMER: Ack pending interrupt always when stopping a timer
  omap: Stalker board: switch over to gpio_set_debounce
  omap: fix build failure due to missing include dma-mapping.h
  omap iommu: Fix Memory leak

14 years agoAdd mdr as maintainer of qla1280 driver.
Jes Sorensen [Wed, 30 Jun 2010 13:37:38 +0000 (15:37 +0200)]
Add mdr as maintainer of qla1280 driver.

As discussed with Mike Reed, add him as the maintainer of the qla1280
driver as I no longer have any hardware and he is actively looking
after it.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agofutex: futex_find_get_task remove credentails check
Michal Hocko [Wed, 30 Jun 2010 07:51:19 +0000 (09:51 +0200)]
futex: futex_find_get_task remove credentails check

futex_find_get_task is currently used (through lookup_pi_state) from two
contexts, futex_requeue and futex_lock_pi_atomic.  None of the paths
looks it needs the credentials check, though.  Different (e)uids
shouldn't matter at all because the only thing that is important for
shared futex is the accessibility of the shared memory.

The credentail check results in glibc assert failure or process hang (if
glibc is compiled without assert support) for shared robust pthread
mutex with priority inheritance if a process tries to lock already held
lock owned by a process with a different euid:

pthread_mutex_lock.c:312: __pthread_mutex_lock_full: Assertion `(-(e)) != 3 || !robust' failed.

The problem is that futex_lock_pi_atomic which is called when we try to
lock already held lock checks the current holder (tid is stored in the
futex value) to get the PI state.  It uses lookup_pi_state which in turn
gets task struct from futex_find_get_task.  ESRCH is returned either
when the task is not found or if credentials check fails.

futex_lock_pi_atomic simply returns if it gets ESRCH.  glibc code,
however, doesn't expect that robust lock returns with ESRCH because it
should get either success or owner died.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Darren Hart <dvhltc@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoStaging: rtl8192u_usb: Add LG device ID 043e:7a01
Ben Hutchings [Fri, 25 Jun 2010 00:35:49 +0000 (01:35 +0100)]
Staging: rtl8192u_usb: Add LG device ID 043e:7a01

Add another device ID as listed in the vendor driver version
0003.0825.2009.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoStaging: rtl8192s_usb: Remove duplicate device ID
Ben Hutchings [Fri, 25 Jun 2010 00:35:01 +0000 (01:35 +0100)]
Staging: rtl8192s_usb: Remove duplicate device ID

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoStaging: rt2870: add device id for Zyxel NWD-270N
Ozan Çağlayan [Mon, 21 Jun 2010 11:00:56 +0000 (14:00 +0300)]
Staging: rt2870: add device id for Zyxel NWD-270N

Add device id for Zyxel NWD-270N USB dongle.

Signed-off-by: Ozan Çağlayan <ozan@pardus.org.tr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoStaging: comedi: fix read past end of array in cb_pcidda_attach()
Dan Carpenter [Mon, 21 Jun 2010 06:49:25 +0000 (08:49 +0200)]
Staging: comedi: fix read past end of array in cb_pcidda_attach()

There are only 6 elements in the cb_pcidda_boards[] array so the
original code read past the end.  After this change nothing uses N_BOARDS
so I removed the definition.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoStaging: rtl8192su: add device ids
Florian Schilhabel [Tue, 8 Jun 2010 01:47:13 +0000 (03:47 +0200)]
Staging: rtl8192su: add device ids

This patch adds some device ids.
The list of supported devices was extracted from realteks driver package.
(0x050d, 0x815F) and (0x0df6, 0x004b) are not in the official list of
supported devices  and may not work correctly.
In case of problems with these, they should probably be removed from the list.

Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoStaging: rtl8192su: remove device ids
Florian Schilhabel [Tue, 8 Jun 2010 01:46:26 +0000 (03:46 +0200)]
Staging: rtl8192su: remove device ids

This patch removes some device-ids.
The list of unsupported devices was extracted from realteks driver package.
removed IDs are:
(0x0bda, 0x8192)
(0x0bda, 0x8709)
(0x07aa, 0x0043)
(0x050d, 0x805E)
(0x0df6, 0x0031)
(0x1740, 0x9201)
(0x2001, 0x3301)
(0x5a57, 0x0290)
These devices are _not_ rtl819su based.

Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoStaging: rtl8187se: Fix compile warnings in 2.6.35-rc2
Larry Finger [Mon, 7 Jun 2010 17:00:44 +0000 (12:00 -0500)]
Staging: rtl8187se: Fix compile warnings in 2.6.35-rc2

In commit bbfb5652, the spacing in the definitions of eqMacAddr and cpMacAddr
in drivers/staging/rtl8187se/r8180_core.c were changed to conform to kernel
standards. These definitions were duplicates of lines found in
drivers/staging/rtl8187se/ieee80211/dot11d.h. Once the change was made, the
following warnings were emitted:

  CC [M]  drivers/staging/rtl8187se/r8180_core.o
drivers/staging/rtl8187se/r8180_core.c:69:0: warning: "eqMacAddr" redefined
drivers/staging/rtl8187se/ieee80211/dot11d.h:39:0: note: this is the location of the previous definition
drivers/staging/rtl8187se/r8180_core.c:70:0: warning: "cpMacAddr" redefined
drivers/staging/rtl8187se/ieee80211/dot11d.h:40:0: note: this is the location of the previous definition

The fix is to keep only the difinition in the header file.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoStaging: wlags49_h2: Fix build error when CONFIG_SYSFS is not set
Javier Martinez Canillas [Thu, 17 Jun 2010 05:17:44 +0000 (01:17 -0400)]
Staging: wlags49_h2: Fix build error when CONFIG_SYSFS is not set

I got a wlags49_h2 driver build error in linux-next when CONFIG_SYSFS is not set.

CC [M]  drivers/staging/wlags49_h2/wl_cs.o
In file included from drivers/staging/wlags49_h2/wl_cs.c:104:
drivers/staging/wlags49_h2/wl_sysfs.h: In function ‘register_wlags_sysfs’:
drivers/staging/wlags49_h2/wl_sysfs.h:5: error: parameter name omitted
drivers/staging/wlags49_h2/wl_sysfs.h: In function ‘unregister_wlags_sysfs’:
drivers/staging/wlags49_h2/wl_sysfs.h:6: error: parameter name omitted
make[1]: *** [drivers/staging/wlags49_h2/wl_cs.o] Error 1
make: *** [_module_drivers/staging/wlags49_h2] Error 2

This is due a wrong function definition (it does not include parameters names).

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoStaging: wlags49_h2: add missing <linux/string.h> for strlen
Jeff Mahoney [Wed, 9 Jun 2010 20:01:10 +0000 (16:01 -0400)]
Staging: wlags49_h2: add missing <linux/string.h> for strlen

On ia64, the build fails with incompatible implicit definition of strlen.
This patch adds the <linux/string.h> include to get the real prototype.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoStaging: hv: fix hv_utils module to properly autoload
Haiyang Zhang [Wed, 19 May 2010 15:56:28 +0000 (15:56 +0000)]
Staging: hv: fix hv_utils module to properly autoload

Added autoloading based on pci id and dmi strings.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agostaging: hv: Fix race condition on vmbus channel initialization
Haiyang Zhang [Fri, 28 May 2010 23:22:44 +0000 (23:22 +0000)]
staging: hv: Fix race condition on vmbus channel initialization

There is a possible race condition when hv_utils starts to load immediately
after hv_vmbus is loading - null pointer error could happen.
This patch added wait/completion to ensure all channels are ready before
vmbus loading completes. So another module won't have any uninitialized channel.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoStaging: comedi: drivers: adl_pci9111: Fix AI commands in TRIG_FOLLOW case
Ian Abbott [Fri, 18 Jun 2010 11:11:28 +0000 (12:11 +0100)]
Staging: comedi: drivers: adl_pci9111: Fix AI commands in TRIG_FOLLOW case

I received a report that AI streaming acquisitions do not work properly
for the adl_pci9111 driver when convert_src is TRIG_TIMER and
scan_begin_src is TRIG_FOLLOW (and scan_begin_arg is therefore 0).  This
seems to be down to the incorrect setting of dev_private->scan_delay in
pci9111_ai_do_cmd().  Under the previously stated conditions,
dev_private->scan_delay ends up set to (unsigned int)-1, but it ought to
be set to 0.  The function sets it to 0 initially, and it only makes
sense to change it if both convert_src and scan_begin_src are set to
TRIG_TIMER.

Note: 'scan_delay' is the number of unwanted scans to discard after each
valid scan.  The hardware does not support 'scan' timing as such, just a
regularly paced conversion timer (with automatic channel switching
between conversions).  The driver simulates a scan period that is some
(>1) multiple of the conversion period times the scan length
(chanlist_len samples) by reading chanlist_len samples and discarding
the next scan_delay times chanlist_len samples.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoStaging: mrst-touchscreen: fix dereferencing free memory
Dan Carpenter [Sat, 5 Jun 2010 17:16:42 +0000 (19:16 +0200)]
Staging: mrst-touchscreen: fix dereferencing free memory

I moved the kfree() down a couple lines after the dereference.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoStaging: batman-adv: fix function prototype
Javier Martinez Canillas [Sun, 6 Jun 2010 19:03:05 +0000 (21:03 +0200)]
Staging: batman-adv: fix function prototype

In today linux-next I got a compile warning in staging/batman-adv.

This is due a struct bin_attribute read function prototype change and the driver was not updated.

This patch solves the issue

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoStaging: batman-adv: return -EFAULT on copy_to_user errors
Dan Carpenter [Sun, 6 Jun 2010 19:03:04 +0000 (21:03 +0200)]
Staging: batman-adv: return -EFAULT on copy_to_user errors

copy_to_user() returns the number of bites remaining but we want to
return a negative error code here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agostaging: usbip: usbip_common: kill rx thread on tx thread creation error.
Himanshu Chauhan [Fri, 4 Jun 2010 17:46:27 +0000 (23:16 +0530)]
staging: usbip: usbip_common: kill rx thread on tx thread creation error.

Signed-off-by: Himanshu Chauhan <hschauhan@nulltrace.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: gadget: f_mass_storage: stale common->fsg value bug fix
Michal Nazarewicz [Fri, 25 Jun 2010 14:29:28 +0000 (16:29 +0200)]
USB: gadget: f_mass_storage: stale common->fsg value bug fix

On fsg_unbind the common->fsg pointer was not NULLed if the
unbound fsg_dev instance was the current one.  As an effect,
the incorrect pointer was preserved in all further operations
which caused do_set_interface to reference an invalid region.

This commit fixes this by raising an exception in fsg_bind
which will change the common->fsg pointer.  This also requires
an wait queue so that the thread in fsg_bind can wait till the
worker thread handles the exception.

This commit removes also a config and new_config fields of
fsg_common as they are no longer needed since fsg can be
used to determine whether function is active or not.

Moreover, this commit removes possible race condition where
the fsg field was modified in both the worker thread and
form various other contexts.  This is fixed by replacing
prev_fsg with new_fsg.  At this point, fsg is assigned only
in worker thread.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: gadget: f_mass_storage: fixed fs descriptors not being updated
Michal Nazarewicz [Fri, 25 Jun 2010 14:29:26 +0000 (16:29 +0200)]
USB: gadget: f_mass_storage: fixed fs descriptors not being updated

The full speed descriptors were copied to the usb_function structure
in the fsg_bind_config function before call to the usb_ep_autoconfig.
The usb_ep_autoconfig was called in fsg_bind using the original
descriptors.  In effect copied descriptors were not updated.

This patch changes the copy full speed descriptors after the call to
usb_op_autoconfig is performed.  This way, copied full speed
descriptors have updated values.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Reported-by: Dries Van Puymbroeck <Dries.VanPuymbroeck@dekimo.com>
Tested-by: Dries Van Puymbroeck <Dries.VanPuymbroeck@dekimo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb: Enable the maximum supported burst mode for DMA
Hema HK [Thu, 24 Jun 2010 17:37:09 +0000 (23:07 +0530)]
USB: musb: Enable the maximum supported burst mode for DMA

Setting MUSB Burst Mode 3 automatically enables support for
lower burst modes (BURST4, BURST8, BURST16 or bursts of unspecified
length). There is no need to set these burst modes based on the
packet size. Also enable the burst mode for both mode1 and mode0.

This is a fix for buggy hardware - having the lower burst modes
enabled can potentially cause lockups of the DMA engine used in
OMAP2/3/4 chips.

Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb: fix Blackfin ulpi stubs
Mike Frysinger [Thu, 24 Jun 2010 17:37:08 +0000 (23:07 +0530)]
USB: musb: fix Blackfin ulpi stubs

The new ulpi code defines fallback stubs for the Blackfin arch, but does
so incorrectly leading to a build failure:
drivers/usb/musb/musb_core.c:227: error: 'musb_ulpi_read' undeclared here (not in a function)
drivers/usb/musb/musb_core.c:228: error: 'musb_ulpi_write' undeclared here (not in a function)

Tweak the fallback stubs so that they do work as intended.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: MUSB: make non-OMAP platforms build with CONFIG_PM=y
Sergei Shtylyov [Thu, 24 Jun 2010 17:37:07 +0000 (23:07 +0530)]
USB: MUSB: make non-OMAP platforms build with CONFIG_PM=y

Attempt to build MUSB driver with CONFIG_PM=y (e.g. in the OTG mode) on DaVinci
results in these link errors:

drivers/built-in.o: In function `musb_restore_context':
led-triggers.c:(.text+0x714d8): undefined reference to
`musb_platform_restore_context'
drivers/built-in.o: In function `musb_save_context':
led-triggers.c:(.text+0x71788): undefined reference to
`musb_platform_save_context'

This turned out to be caused by commit 9957dd97ec5e98dd334f87ade1d9a0b24d1f86eb
(usb: musb: Fix compile error for omaps for musb_hdrc). Revert it, taking into
account the rename of CONFIG_ARCH_OMAP34XX into CONFIG_ARCH_OMAP3 (which that
commit fixed in a completely inappropriate way) and the recent addition of
OMAP4 support.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb_core: make disconnect and suspend interrupts work again
Sergei Shtylyov [Thu, 24 Jun 2010 17:37:06 +0000 (23:07 +0530)]
USB: musb_core: make disconnect and suspend interrupts work again

Commit 1c25fda4a09e8229800979986ef399401053b46e (usb: musb: handle irqs in the
order dictated by programming guide) forgot to get rid of the old 'STAGE0_MASK'
filter for calling musb_stage0_irq(), so now disconnect and suspend interrupts
are effectively ignored...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: obey the sysfs power/wakeup setting
Alan Stern [Tue, 22 Jun 2010 20:14:48 +0000 (16:14 -0400)]
USB: obey the sysfs power/wakeup setting

This patch (as1403) is a partial reversion of an earlier change
(commit 5f677f1d45b2bf08085bbba7394392dfa586fa8e "USB: fix remote
wakeup settings during system sleep").  After hearing from a user, I
realized that remote wakeup should be enabled during system sleep
whenever userspace allows it, and not only if a driver requests it
too.

Indeed, there could be a device with no driver, that does nothing but
generate a wakeup request when the user presses a button.  Such a
device should be allowed to do its job.

The problem fixed by the earlier patch -- device generating a wakeup
request for no reason, causing system suspend to abort -- was also
addressed by a later patch ("USB: don't enable remote wakeup by
default", accepted but not yet merged into mainline).  The device
won't be able to generate the bogus wakeup requests because it will be
disabled for remote wakeup by default.  Hence this reversion will not
re-introduce any old problems.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org> [.34]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: gadget eth: Fix calculate CRC32 in EEM
Jiri Pinkava [Sun, 20 Jun 2010 18:05:52 +0000 (20:05 +0200)]
USB: gadget eth: Fix calculate CRC32 in EEM

CRC should be calculated for Ethernet frame, not for whole recievede EEM data.
This bug shows rarely, because in many times len == skb->len.

Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: qcserial: fix a memory leak in qcprobe error path
Axel Lin [Mon, 21 Jun 2010 00:44:17 +0000 (08:44 +0800)]
USB: qcserial: fix a memory leak in qcprobe error path

This patch adds missing kfree(data) before return -ENODEV.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: gadget/printer, fix sleep inside atomic
Jiri Slaby [Mon, 21 Jun 2010 15:02:40 +0000 (17:02 +0200)]
USB: gadget/printer, fix sleep inside atomic

Stanse found that sleep is called inside atomic context created by
lock_printer_io spinlock in several functions. It's used in process
context only and some functions sleep inside its critical section. As
this is not allowed for spinlocks, switch it to mutex.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Craig W. Nadler <craig@nadler.us>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: isp1362-hcd, fix double lock
Jiri Slaby [Mon, 21 Jun 2010 15:02:51 +0000 (17:02 +0200)]
USB: isp1362-hcd, fix double lock

Stanse found that isp1362_sw_reset tries to take a isp1362_hcd->lock,
but it is already held in isp1362_hc_stop. Avoid that by introducing
__isp1362_sw_reset which doesn't take the lock and call it from
isp1362_hc_stop. isp1362_sw_reset is then as simple as lock --
__isp1362_sw_reset -- unlock.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Lothar Wassmann <LW@KARO-electronics.de>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: serial: ftdi: correct merge conflict with CONTEC id
Daniel Sangorrin [Fri, 18 Jun 2010 06:30:02 +0000 (15:30 +0900)]
USB: serial: ftdi: correct merge conflict with CONTEC id

This patch corrects a problem with the merge of a previous
patch to add the CONTEC identifier.

I believe the merge problem occurred with the commit:
dee5658b482e9e2ac7d6205dc876fc11d4008138

Originally I submitted a patch and then they asked me to order the IDs
and resubmit, so did I. But unfortunately in the end somehow both
patches were merged.

Signed-off-by: Daniel Sangorrin <daniel.sangorrin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: fix oops in usb_sg_init()
Alan Stern [Fri, 18 Jun 2010 14:16:33 +0000 (10:16 -0400)]
USB: fix oops in usb_sg_init()

This patch (as1401) fixes a bug in usb_sg_init() that can cause an
invalid pointer dereference.  An inner loop reuses some local variables
in an unsafe manner, so new variables are introduced.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: s3c2410: deactivate endpoints before gadget unbinding
Vladimir Zapolskiy [Fri, 18 Jun 2010 04:25:00 +0000 (08:25 +0400)]
USB: s3c2410: deactivate endpoints before gadget unbinding

Gadget disconnect must be called before unbinding to avoid races.
The change fixes an oops on g_ether module unregistering.

Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: ehci-mxc: bail out on transceiver problems
Wolfram Sang [Tue, 15 Jun 2010 10:34:23 +0000 (12:34 +0200)]
USB: ehci-mxc: bail out on transceiver problems

The old code registered the hcd even if there were no transceivers
detected, leading to oopses like this if we try to probe a non-existant
ULPI:

[    2.730000] mxc-ehci mxc-ehci.0: unable to init transceiver
[    2.740000] timeout polling for ULPI device
[    2.740000] timeout polling for ULPI device
[    2.750000] mxc-ehci mxc-ehci.0: unable to enable vbus on transceiver
[    2.750000] mxc-ehci mxc-ehci.0: Freescale On-Chip EHCI Host Controller
[    2.760000] mxc-ehci mxc-ehci.0: new USB bus registered, assigned bus number 2
[    2.770000] Unhandled fault: external abort on non-linefetch (0x808) at 0xc4876184
[    2.770000] Internal error: : 808 [#1] PREEMPT
[    2.770000] last sysfs file:
[    2.770000] Modules linked in:
[    2.770000] CPU: 0    Not tainted  (2.6.33.5 #5)
[    2.770000] PC is at ehci_hub_control+0x4d4/0x8f8
[    2.770000] LR is at ehci_mxc_setup+0xbc/0xdc
[    2.770000] pc : [<c0196dfc>]    lr : [<c019bc8c>]    psr: 00000093
[    2.770000] sp : c3815e40  ip : 00000001  fp : 60000013
[    2.770000] r10: c4876184  r9 : 00000000  r8 : c3814000
[    2.770000] r7 : c391d2cc  r6 : 00000001  r5 : 00000001  r4 : 00000000
[    2.770000] r3 : 80000000  r2 : 00000007  r1 : 80000000  r0 : c4876184
[    2.770000] Flags: nzcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM Segment kernel
[    2.770000] Control: 0005317f  Table: a0004000  DAC: 00000017
[    2.770000] Process swapper (pid: 1, stack limit = 0xc3814270)
...

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: stable <stable@kernel.org>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: otg/ulpi: bail out on read errors
Wolfram Sang [Tue, 15 Jun 2010 10:34:22 +0000 (12:34 +0200)]
USB: otg/ulpi: bail out on read errors

otg_read may return errnos, so bail out correctly to prevent bogus
ID-numbers.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Daniel Mack <daniel@caiaq.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agousb: musb: Fix a bug by making suspend interrupt available in device mode
Maulik Mankad [Tue, 15 Jun 2010 09:10:27 +0000 (14:40 +0530)]
usb: musb: Fix a bug by making suspend interrupt available in device mode

As a part of aligning the ISR code for MUSB with the specs, the
ISR code was re-written.

See Commit 1c25fda4a09e8229800979986ef399401053b46e (usb: musb: handle
irqs in the order dictated by programming guide)

With this the suspend interrupt came accidently under CONFIG_USB_MUSB_HDRC_HCD.

The fix brings suspend interrupt handling outside
CONFIG_USB_MUSB_HDRC_HCD.

Signed-off-by: Maulik Mankad <x0082077@ti.com>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: stable <stable@kernel.org> [.34]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: r8a66597: Fix failure in change of status
Nobuhiro Iwamatsu [Mon, 7 Jun 2010 07:55:56 +0000 (16:55 +0900)]
USB: r8a66597: Fix failure in change of status

In the change by 749da5f82fe33ff68dd4aa1a5e35cd9aa6246dab,
The change in the status when the USB device is connected is wrong.
Therefore, the device is not recognized.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
CC: Paul Mundt" <lethal@linux-sh.org>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: xHCI: Fix bug in link TRB activation change.
Sarah Sharp [Thu, 10 Jun 2010 19:25:28 +0000 (12:25 -0700)]
USB: xHCI: Fix bug in link TRB activation change.

Commit 6c12db90f19727c76990e7f4801c67a148b30111 introduced a bug for
control transfers.  The patch was supposed to change when the link TRBs at
the end of each ring segment were given to the hardware.  If a transfer
descriptor (TD) ended just before the link TRB, the code wouldn't give
back the link TRB to the hardware; instead it would be given back in
prepare_ring() just before the next TD was enqueued at the top of the
ring.

Unfortunately, the code relied on checking the chain bit of the TRB to
determine whether the TD ended just before the link TRB.  It assumed that
the ring enqueuing code would call prepare_ring() before enqueuing the
next TD.  However, control transfers are made of multiple TDs, and
prepare_ring() is only called once before enqueuing two or three TDs.

If the first or second TD of the control transfer ended just before the
link TRB, then the code in inc_enq() would not move the enqueue pointer
past the link TRB, and the link TRB would get overwritten.  This would
cause the xHCI driver to start writing to memory past the ring segment,
and eventually the system would crash or hang.

The fix is to add a flag to inc_enq() that says whether the caller will
enqueue more TDs before calling prepare_ring().  If the chain bit is
cleared (meaning this is the last TRB in a TD), and the caller will not
enqueue more TDs, then we defer giving back the link TRB.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: gadget: g_fs: possible invalid pointer reference bug fixed
Michal Nazarewicz [Mon, 14 Jun 2010 08:43:34 +0000 (10:43 +0200)]
USB: gadget: g_fs: possible invalid pointer reference bug fixed

During __gfs_do_config() some invalid pointers may be left
in usb_configuration::interfaces array from previous calls
to the __gfs_do_config() for the same configuration.  This
will always happen if an user space function which has
a fewer then the last user space function registers itself.
Composite's set_config() function that a pointer after the
last interface in usb_configuration::interface is NULL
unless the array is full.

This patch makes the __gfs_do_config() make sure that if the
usb_configuration::interface is not full then a pointer
after the last interface is NULL.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_serial: fix tty cleanup on unload
Jon Povey [Mon, 14 Jun 2010 10:42:10 +0000 (19:42 +0900)]
USB: g_serial: fix tty cleanup on unload

Call put_tty_driver() in cleanup function, to fix Oops when trying to open
gadget serial char device after module unload.

Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_serial: don't set low_latency flag
Jon Povey [Mon, 14 Jun 2010 10:41:04 +0000 (19:41 +0900)]
USB: g_serial: don't set low_latency flag

No longer set low_latency flag as it causes this warning backtrace:

  WARNING: at kernel/mutex.c:207 __mutex_lock_slowpath+0x6c/0x288()

Fix associated locking and wakeups.

Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
Cc: Maulik Mankad <x0082077@ti.com>
Cc: stable <stable@kernel.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoserial: cpm_uart: implement the cpm_uart_early_write() function for console poll
Dongdong Deng [Thu, 17 Jun 2010 03:13:40 +0000 (11:13 +0800)]
serial: cpm_uart: implement the cpm_uart_early_write() function for console poll

The cpm_uart_early_write() function which was used for console poll
isn't implemented in the cpm uart driver.

Implementing this function both fixes the build when CONFIG_CONSOLE_POLL
is set and allows kgdboc to work via the cpm uart.

Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Reviewed-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agofs/fcntl.c:kill_fasync_rcu() fa_lock must be IRQ-safe
Andrew Morton [Tue, 29 Jun 2010 22:05:42 +0000 (15:05 -0700)]
fs/fcntl.c:kill_fasync_rcu() fa_lock must be IRQ-safe

Fix a lockdep-splat-causing regression introduced by commit 989a2979205d
("fasync: RCU and fine grained locking").

kill_fasync() can be called from both process and hard-irq context, so
fa_lock must be taken with IRQs disabled.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16230

Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Tested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoum: os-linux/mem.c needs sys/stat.h
Liu Aleaxander [Tue, 29 Jun 2010 22:05:40 +0000 (15:05 -0700)]
um: os-linux/mem.c needs sys/stat.h

The os-linux/mem.c file calls fchmod function, which is declared in sys/stat.h
header file, so include it.  Fixes build breakage under FC13.

Signed-off-by: Liu Aleaxander <Aleaxander@gmail.com>
Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agodrivers/video/nuc900fb.c: fix lcd build error
Wan ZongShun [Tue, 29 Jun 2010 22:05:39 +0000 (15:05 -0700)]
drivers/video/nuc900fb.c: fix lcd build error

Fix a nuc900 lcd build error.

Since the 'nuc900_driver_clksrc_div()' API cannot be merged into mainline
successfully, I removed this clock source selection hook in this driver.
This means nuc900 lcd driver has to select default clock source from the
external crystal now.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Cc: Qiang Wang <rurality.wq@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agosysvfs: fix NULL deref. when allocating new inode
Lubomir Rintel [Tue, 29 Jun 2010 22:05:38 +0000 (15:05 -0700)]
sysvfs: fix NULL deref. when allocating new inode

A call to sysv_write_inode() in sysv_new_inode() to its new interface that
replaced wait flag with writeback structure.  This was broken by
a9185b41a4f84971b930c519f0c63bd450c4810d ("pass writeback_control to
->write_inode").

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@kernel.org> [2.6.34.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agodrivers/gpio is platform-neutral
David Brownell [Tue, 29 Jun 2010 22:05:37 +0000 (15:05 -0700)]
drivers/gpio is platform-neutral

Update Kconfig and Makefile in drivers/gpio to discourage inappropriate
addition of platform-specific code.

[akpm@linux-foundation.org: fix tpyo]
Signed-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agortc: fix ds1388 time corruption
Joakim Tjernlund [Tue, 29 Jun 2010 22:05:34 +0000 (15:05 -0700)]
rtc: fix ds1388 time corruption

The ds1307 driver misreads the ds1388 registers when checking for 12 or 24
hour mode.  Instead of checking the hour register it reads the minute
register.  Therefore the driver thinks minutes >= 40 has the 12HR bit set
and resets the minute register by zeroing the high bits.  This results in
minutes are reset to 0-9, jumping back in time 40 or 50 minutes.  The time
jump is also written back to the RTC.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: some Atmel drivers change maintainer
Nicolas Ferre [Tue, 29 Jun 2010 22:05:33 +0000 (15:05 -0700)]
MAINTAINERS: some Atmel drivers change maintainer

I take over the maintenance of SPI, USART, Ethernet and USB gadget
drivers.  Those drivers are found in Atmel microcontrollers, both
AT32/AVR32 and AT91/ARM.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: Masami Hiramatsu has moved
Masami Hiramatsu [Tue, 29 Jun 2010 22:05:32 +0000 (15:05 -0700)]
MAINTAINERS: Masami Hiramatsu has moved

Masami Hiramatsu moved back to Hitachi Japan and changed his email
address.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoipmi: set schedule_timeout_wait() value back to one
Martin Wilck [Tue, 29 Jun 2010 22:05:31 +0000 (15:05 -0700)]
ipmi: set schedule_timeout_wait() value back to one

Fix a regression introduced by ae74e823cb7d ("ipmi: add parameter to limit
CPU usage in kipmid").

Some systems were seeing CPU usage go up dramatically with the recent
changes to try to reduce timer usage in the IPMI driver.  This was traced
down to schedule_timeout_interruptible(1) being changed to
schedule_timeout_interruptbile(0).  Revert that part of the change.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16147

Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Cc: <stable@kernel.org> [2.6.34.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomempolicy: fix dangling reference to tmpfs superblock mpol
Lee Schermerhorn [Tue, 29 Jun 2010 22:05:30 +0000 (15:05 -0700)]
mempolicy: fix dangling reference to tmpfs superblock mpol

My patch to "Factor out duplicate put/frees in mpol_shared_policy_init()
to a common return path"; and Dan Carpenter's fix thereto both left a
dangling reference to the incoming tmpfs superblock mempolicy structure.
A similar leak was introduced earlier when the nodemask was moved offstack
to the scratch area despite the note in the comment block regarding the
incoming ref.

Move the remaining 'put of the incoming "mpol" to the common exit path to
drop the reference.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoipmi: make sure drivers were registered before unregistering them
Matthew Garrett [Tue, 29 Jun 2010 22:05:29 +0000 (15:05 -0700)]
ipmi: make sure drivers were registered before unregistering them

The ipmi code will never register a PCI or Open Firmware driver if a
hardcoded device is provided by the user by providing device addresses via
the module parameters.  This can cause us to attempt to unregister a
driver that was never registered, resulting in an oops.  Keep track of
registration in order to avoid this.

Fixes a post-2.6.34 regression.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agokexec: fix Oops in crash_shrink_memory()
Pavan Naregundi [Tue, 29 Jun 2010 22:05:28 +0000 (15:05 -0700)]
kexec: fix Oops in crash_shrink_memory()

When crashkernel is not enabled, "echo 0 > /sys/kernel/kexec_crash_size"
OOPSes the kernel in crash_shrink_memory.  This happens when
crash_shrink_memory tries to release the 'crashk_res' resource which are
not reserved.  Also value of "/sys/kernel/kexec_crash_size" shows as 1,
which should be 0.

This patch fixes the OOPS in crash_shrink_memory and shows
"/sys/kernel/kexec_crash_size" as 0 when crash kernel memory is not
reserved.

Signed-off-by: Pavan Naregundi <pavan@linux.vnet.ibm.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: update files and add maintainer for SAMSUNG ARM ARCHITECTURES
Kukjin Kim [Tue, 29 Jun 2010 22:05:26 +0000 (15:05 -0700)]
MAINTAINERS: update files and add maintainer for SAMSUNG ARM ARCHITECTURES

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agocompiler-gcc.h: gcc-4.5 needs noclone and noinline on __naked functions
Mikael Pettersson [Tue, 29 Jun 2010 22:05:25 +0000 (15:05 -0700)]
compiler-gcc.h: gcc-4.5 needs noclone and noinline on __naked functions

A __naked function is defined in C but with a body completely implemented
by asm(), including any prologue and epilogue.  These asm() bodies expect
standard calling conventions for parameter passing.  Older GCCs implement
that correctly, but 4.[56] currently do not, see GCC PR44290.  In the
Linux kernel this breaks ARM, causing most arch/arm/mm/copypage-*.c
modules to get miscompiled, resulting in kernel crashes during bootup.

Part of the kernel fix is to augment the __naked function attribute to
also imply noinline and noclone.  This patch implements that, and has been
verified to fix boot failures with gcc-4.5 compiled 2.6.34 and 2.6.35-rc1
kernels.  The patch is a no-op with older GCCs.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoflat: tweak default stack alignment
Mike Frysinger [Tue, 29 Jun 2010 22:05:21 +0000 (15:05 -0700)]
flat: tweak default stack alignment

The recent commit 1f0ce8b3dd667dca7 ("mm: Move ARCH_SLAB_MINALIGN and
ARCH_KMALLOC_MINALIGN to <linux/slab_def.h>") which moved the
ARCH_SLAB_MINALIGN default into the global header inadvertently broke FLAT
for a bunch of systems.  Blackfin systems now fail on any FLAT exec with:
Unable to read code+data+bss, errno 14 When your /init is a FLAT binary,
obviously this can be annoying ;).

This stems from the alignment usage in the FLAT loader.  The behavior
before was that FLAT would default to ARCH_SLAB_MINALIGN only if it was
defined, and this was only defined by arches when they wanted a larger
alignment value.  Otherwise it'd default to pointer alignment.  Arguably,
this is kind of hokey that the FLAT is semi-abusing defines it shouldn't.

So let's merge the two alignment requirements so the floor is never 0.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: David McCullough <davidm@snapgear.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agolxfb: fix incorrect __init annotation
Andres Salomon [Tue, 29 Jun 2010 22:05:20 +0000 (15:05 -0700)]
lxfb: fix incorrect __init annotation

WARNING: vmlinux.o(.data+0x196e8): Section mismatch in reference from the
variable lxfb_driver to the function .init.text:lxfb_probe() The variable
lxfb_driver references the function __init lxfb_probe()

This changes lxfb_probe and friends to use __devinit, and also adds
__devexit to lxfb_remove.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agogxfb: fix incorrect __init annotation
Andres Salomon [Tue, 29 Jun 2010 22:05:19 +0000 (15:05 -0700)]
gxfb: fix incorrect __init annotation

WARNING: vmlinux.o(.data+0x195d8): Section mismatch in reference from the
variable gxfb_driver to the function .init.text:gxfb_probe() The variable
gxfb_driver references the function __init gxfb_probe()

This changes gxfb_probe and friends to use __devinit, and also adds
__devexit to gxfb_remove.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomemcg: fix wake up in oom wait queue
KAMEZAWA Hiroyuki [Tue, 29 Jun 2010 22:05:18 +0000 (15:05 -0700)]
memcg: fix wake up in oom wait queue

OOM-waitqueue should be waken up when oom_disable is canceled.  This is a
fix for 3c11ecf448eff8f1 ("memcg: oom kill disable and oom status").

How to test:
 Create a cgroup A...
 1. set memory.limit and memory.memsw.limit to be small value
 2. echo 1 > /cgroup/A/memory.oom_control, this disables oom-kill.
 3. run a program which must cause OOM.

A program executed in 3 will sleep by oom_waiqueue in memcg.  Then, how to
wake it up is problem.

 1. echo 0 > /cgroup/A/memory.oom_control (enable OOM-killer)
 2. echo big mem > /cgroup/A/memory.memsw.limit_in_bytes(allow more swap)

etc..

Without the patch, a task in slept can not be waken up.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agonommu: add '[stack]' label to /proc/pid/maps output
Mike Frysinger [Tue, 29 Jun 2010 22:05:17 +0000 (15:05 -0700)]
nommu: add '[stack]' label to /proc/pid/maps output

Add support to the NOMMU /proc/pid/maps file to show which mapping is the stack
of the original thread after execve.  This is largely based on the MMU code.
Subsidiary thread stacks are not indicated.

For FDPIC, we now get:

root:/> cat /proc/self/maps
02064000-02067ccc rw-p 0004d000 00:01 22         /bin/busybox
0206e000-0206f35c rw-p 00006000 00:01 295        /lib/ld-uClibc.so.0
025f0000-025f6f0c r-xs 00000000 00:01 295        /lib/ld-uClibc.so.0
02680000-026ba6b0 r-xs 00000000 00:01 297        /lib/libc.so.0
02700000-0274d384 r-xs 00000000 00:01 22         /bin/busybox
02816000-02817000 rw-p 00000000 00:00 0
02848000-0284c0d8 rw-p 00000000 00:00 0
02860000-02880000 rw-p 00000000 00:00 0          [stack]

The semi-downside here is that for FLAT, we get:

root:/> cat /proc/155/maps
029f0000-029f9000 rwxp 00000000 00:00 0          [stack]

The reason being that FLAT combines a whole lot of stuff into one map
(including the stack).  But this isn't any worse than the current output
(which is nothing), so screw it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agogenalloc: fix allocation from end of pool
Imre Deak [Tue, 29 Jun 2010 22:05:15 +0000 (15:05 -0700)]
genalloc: fix allocation from end of pool

bitmap_find_next_zero_area requires the size of the bitmap, we instead
passed the last suitable position.  This made it impossible to allocate
from the end of the pool.

Fixes a regression introduced by 243797f59b748f679ab88d456fcc4f92236d724b
("genalloc: use bitmap_find_next_zero_area").

Signed-off-by: Imre Deak <imre.deak@nokia.com>
Cc: Zygo Blaxell <zygo.blaxell@xandros.com>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Tue, 29 Jun 2010 17:42:52 +0000 (10:42 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: Don't count_vm_events for discard bio in submit_bio.
  cfq: fix recursive call in cfq_blkiocg_update_completion_stats()
  cfq-iosched: Fixed boot warning with BLK_CGROUP=y and CFQ_GROUP_IOSCHED=n
  cfq: Don't allow queue merges for queues that have no process references
  block: fix DISCARD_BARRIER requests
  cciss: set SCSI max cmd len to 16, as default is wrong
  cpqarray: fix two more wrong section type
  cpqarray: fix wrong __init type on pci probe function
  drbd: Fixed a race between disk-attach and unexpected state changes
  writeback: fix pin_sb_for_writeback
  writeback: add missing requeue_io in writeback_inodes_wb
  writeback: simplify and split bdi_start_writeback
  writeback: simplify wakeup_flusher_threads
  writeback: fix writeback_inodes_wb from writeback_inodes_sb
  writeback: enforce s_umount locking in writeback_inodes_sb
  writeback: queue work on stack in writeback_inodes_sb
  writeback: fix writeback completion notifications

14 years agofs: fix superblock iteration race
npiggin@suse.de [Thu, 24 Jun 2010 03:02:14 +0000 (13:02 +1000)]
fs: fix superblock iteration race

list_for_each_entry_safe is not suitable to protect against concurrent
modification of the list. 6754af6 introduced a race in sb walking.

list_for_each_entry can use the trick of pinning the current entry in
the list before we drop and retake the lock because it subsequently
follows cur->next. However list_for_each_entry_safe saves n=cur->next
for following before entering the loop body, so when the lock is
dropped, n may be deleted.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Frank Mayhar <fmayhar@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 28 Jun 2010 19:24:43 +0000 (12:24 -0700)]
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Fix undeclared ENOSYS in include/linux/tracepoint.h
  perf record: prevent kill(0, SIGTERM);
  perf session: Remove threads from tree on PERF_RECORD_EXIT
  perf/tracing: Fix regression of perf losing kprobe events
  perf_events: Fix Intel Westmere event constraints
  perf record: Don't call newt functions when not initialized

14 years agoMerge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 28 Jun 2010 19:23:12 +0000 (12:23 -0700)]
Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Deal with desc->set_type() changing desc->chip

14 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 28 Jun 2010 19:18:30 +0000 (12:18 -0700)]
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Prevent compiler from optimising the sched_avg_update() loop
  sched: Fix over-scheduling bug
  sched: Fix PROVE_RCU vs cpu_cgroup

14 years agoMerge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 28 Jun 2010 19:18:02 +0000 (12:18 -0700)]
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  nohz: Fix nohz ratelimit

14 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 28 Jun 2010 19:17:40 +0000 (12:17 -0700)]
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: silence PROVE_RCU in sched_fork()
  idr: fix RCU lockdep splat in idr_get_next()
  rcu: apply RCU protection to wake_affine()

14 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 28 Jun 2010 19:06:25 +0000 (12:06 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, Calgary: Increase max PHB number
  x86: Fix rebooting on Dell Precision WorkStation T7400
  x86: Fix vsyscall on gcc 4.5 with -Os
  x86, pat: Proper init of memtype subtree_max_end
  um, hweight: Fix UML boot crash due to x86 optimized hweight
  x86, setup: Set ax register in boot vga query
  percpu, x86: Avoid warnings of unused variables in per cpu
  x86, irq: Rename gsi_end gsi_top, and fix off by one errors
  x86: use __ASSEMBLY__ rather than __ASSEMBLER__

14 years agoMerge branch 'fixes' of ssh://master.kernel.org/~sfr/next-fixes
Linus Torvalds [Mon, 28 Jun 2010 19:06:00 +0000 (12:06 -0700)]
Merge branch 'fixes' of ssh://master.kernel.org/~sfr/next-fixes

* 'fixes' of ssh://master.kernel.org/~sfr/next-fixes:
  acpi: update gfp/slab.h includes
  ocfs2: update gfp/slab.h includes
  davinci: update gfp/slab.h includes
  arm: update gfp/slab.h includes
  v4l-dvb: update gfp/slab.h includes

14 years agoMerge branch 'for_2.6.35rc' of git://git.pwsan.com/linux-2.6 into omap-fixes-for...
Tony Lindgren [Mon, 28 Jun 2010 12:47:04 +0000 (15:47 +0300)]
Merge branch 'for_2.6.35rc' of git://git.pwsan.com/linux-2.6 into omap-fixes-for-linus

14 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Mon, 28 Jun 2010 05:56:32 +0000 (22:56 -0700)]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md/raid5: don't include 'spare' drives when reshaping to fewer devices.
  md/raid5: add a missing 'continue' in a loop.
  md/raid5: Allow recovered part of partially recovered devices to be in-sync
  md/raid5: More careful check for "has array failed".
  md: Don't update ->recovery_offset when reshaping an array to fewer devices.
  md/raid5: avoid oops when number of devices is reduced then increased.
  md: enable raid4->raid0 takeover
  md: clear layout after ->raid0 takeover
  md: fix raid10 takeover: use new_layout for setup_conf
  md: fix handling of array level takeover that re-arranges devices.
  md: raid10: Fix null pointer dereference in fix_read_error()
  Restore partition detection of newly created md arrays.

14 years agoacpi: update gfp/slab.h includes
Tejun Heo [Mon, 29 Mar 2010 17:52:44 +0000 (02:52 +0900)]
acpi: update gfp/slab.h includes

Implicit slab.h inclusion via percpu.h is about to go away.  Make sure
gfp.h or slab.h is included as necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
14 years agoocfs2: update gfp/slab.h includes
Tejun Heo [Mon, 29 Mar 2010 17:52:32 +0000 (02:52 +0900)]
ocfs2: update gfp/slab.h includes

Implicit slab.h inclusion via percpu.h is about to go away.  Make sure
gfp.h or slab.h is included as necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
14 years agodavinci: update gfp/slab.h includes
Tejun Heo [Mon, 29 Mar 2010 17:52:36 +0000 (02:52 +0900)]
davinci: update gfp/slab.h includes

Implicit slab.h inclusion via percpu.h is about to go away.  Make sure
gfp.h or slab.h is included as necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
14 years agoarm: update gfp/slab.h includes
Tejun Heo [Mon, 29 Mar 2010 17:52:45 +0000 (02:52 +0900)]
arm: update gfp/slab.h includes

Implicit slab.h inclusion via percpu.h is about to go away.  Make sure
gfp.h or slab.h is included as necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
14 years agov4l-dvb: update gfp/slab.h includes
Tejun Heo [Mon, 29 Mar 2010 17:52:33 +0000 (02:52 +0900)]
v4l-dvb: update gfp/slab.h includes

Implicit slab.h inclusion via percpu.h is about to go away.  Make sure
gfp.h or slab.h is included as necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Linus Torvalds [Sun, 27 Jun 2010 18:33:44 +0000 (11:33 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: fix first chunk match in per_cpu_ptr_to_phys()
  percpu: fix trivial bugs in pcpu_build_alloc_info()

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sun, 27 Jun 2010 18:28:02 +0000 (11:28 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (52 commits)
  phylib: Add autoload support for the LXT973 phy.
  ISDN: hysdn, fix potential NULL dereference
  vxge: fix memory leak in vxge_alloc_msix() error path
  isdn/gigaset: correct CAPI connection state storage
  isdn/gigaset: encode HLC and BC together
  isdn/gigaset: correct CAPI DATA_B3 Delivery Confirmation
  isdn/gigaset: correct CAPI voice connection encoding
  isdn/gigaset: honor CAPI application's buffer size request
  cpmac: do not leak struct net_device on phy_connect errors
  smc91c92_cs: fix the problem that lan & modem does not work simultaneously
  ipv6: fix NULL reference in proxy neighbor discovery
  Bluetooth: Bring back var 'i' increment
  xfrm: check bundle policy existance before dereferencing it
  sky2: enable rx/tx in sky2_phy_reinit()
  cnic: Disable statistics initialization for eth clients that do not support statistics
  net: add dependency on fw class module to qlcnic and netxen_nic
  snmp: fix SNMP_ADD_STATS()
  hso: remove setting of low_latency flag
  udp: Fix bogus UFO packet generation
  lasi82596: fix netdev_mc_count conversion
  ...

14 years agoMerge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Sun, 27 Jun 2010 16:04:02 +0000 (09:04 -0700)]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFSv4: Fix an embarassing typo in encode_attrs()
  NFSv4: Ensure that /proc/self/mountinfo displays the minor version number
  NFSv4.1: Ensure that we initialise the session when following a referral
  SUNRPC: Fix a re-entrancy bug in xs_tcp_read_calldir()
  nfs4 use mandatory attribute file type in nfs4_get_root

14 years agoMerge branch 'sh/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal...
Linus Torvalds [Sun, 27 Jun 2010 15:18:20 +0000 (08:18 -0700)]
Merge branch 'sh/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* 'sh/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  clocksource: sh_cmt: Fix up bogus shift value.
  arch/sh/mm: Eliminate a double lock
  sh: Fix up IORESOURCE_PCI_FIXED usage in pcibios_fixup_device_resources().
  sh: remove duplicated #include

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Sun, 27 Jun 2010 15:03:00 +0000 (08:03 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  MAINTAINERS - Add an entry for the input MT protocol
  Input: wacom - fix serial number handling on Cintiq 21UX2
  Input: fixup X86_MRST selects
  Input: sysrq - fix "stuck" SysRq mode
  Input: ad7877 - fix spi word size to 16 bit
  Input: pcf8574_keypad - fix off by one in pcf8574_kp_irq_handler()

14 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Sun, 27 Jun 2010 14:50:47 +0000 (07:50 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  ext3: update ctime when changing the file's permission by setfacl
  ext2: update ctime when changing the file's permission by setfacl