The change breaks systems on which the DT node of a device is used by
multiple drivers. The proposed workaround to clear OF_POPULATED is just a
band aid and this needs to be cleaned up at the root of the problem.
Revert this for now.
Reported-by: Ionela Voinescu <ionela.voinescu@arm.com> Reported-by: Jon Hunter <jonathanh@nvidia.com> Requested-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Saravana Kannan <saravanak@google.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200324175955.GA16972@arm.com
CONFIG_GENERIC_GETTIMEOFDAY is a sufficient condition to verify if an
architecture implements asm/vdso/clocksource.h or not. The current
implementation wrongly assumes that the same is true for the config
option CONFIG_ARCH_CLOCKSOURCE_DATA.
This results in a series of build errors on ia64/sparc/sparc64 like this:
In file included from ./include/linux/clocksource.h:31,
from ./include/linux/clockchips.h:14,
from ./include/linux/tick.h:8,
from fs/proc/stat.c:15:
./include/vdso/clocksource.h:9:10: fatal error: asm/vdso/clocksource.h:
No such file or directory
9 | #include <asm/vdso/clocksource.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fix the issue removing the unneeded config condition.
Fixes: 14ee2ac618e4 ("linux/clocksource.h: Extract common header for vDSO") Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200323133920.46546-1-vincenzo.frascino@arm.com
User Mode Linux is a flavor of x86 that from the vDSO prospective always
falls back on system calls. This implies that it does not require any
of the unified vDSO definitions and their inclusion causes side effects
like this:
In file included from include/vdso/processor.h:10:0,
from include/vdso/datapage.h:17,
from arch/x86/include/asm/vgtod.h:7,
from arch/x86/um/../kernel/sys_ia32.c:49:
>> arch/x86/include/asm/vdso/processor.h:11:29: error: redefinition of 'rep_nop'
static __always_inline void rep_nop(void)
^~~~~~~
In file included from include/linux/rcupdate.h:30:0,
from include/linux/rculist.h:11,
from include/linux/pid.h:5,
from include/linux/sched.h:14,
from arch/x86/um/../kernel/sys_ia32.c:25:
arch/x86/um/asm/processor.h:24:20: note: previous definition of 'rep_nop' was here
static inline void rep_nop(void)
Make sure that the unnecessary headers are not included when um is built
to address the problem.
Fixes: abc22418db02 ("x86/vdso: Enable x86 to use common headers") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200323124109.7104-1-vincenzo.frascino@arm.com
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Refactor the unified vdso code to use the common headers.
arm64: vdso32: Include common headers in the vdso library
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Refactor the vdso32 implementation to include common headers.
arm64: vdso: Include common headers in the vdso library
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Refactor the vdso implementation to include common headers.
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Introduce asm/vdso/processor.h to contain all the arm64 specific
functions that are suitable for vDSO inclusion.
linux/elfnote.h: Replace elf.h with UAPI equivalent
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Replace linux/elf.h with UAPI equivalent in elfnote.h to make the header
suitable for vDSO inclusion.
In the process of creating the source file of a module modpost injects a
set of includes that are not required if the compilation unit is
statically built into the kernel.
The order of inclusion of the headers can cause redefinition problems
(e.g.):
In file included from include/linux/elf.h:5:0,
from include/linux/module.h:18,
from crypto/arc4.mod.c:2:
#define ELF_OSABI ELFOSABI_LINUX
In file included from include/linux/elfnote.h:62:0,
from include/linux/build-salt.h:4,
from crypto/arc4.mod.c:1:
include/uapi/linux/elf.h:363:0: note: this is the location of
the previous definition
#define ELF_OSABI ELFOSABI_NONE
The issue was exposed during the development of the series [1].
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Introduce processor.h to contain all the processor specific functions
that are suitable for vDSO inclusion.
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Split ktime.h into linux and common headers to make the latter suitable
for inclusion in the vDSO library.
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Split jiffies.h into linux and common headers to make the latter suitable
for inclusion in the vDSO library.
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Split time64.h into linux and common headers to make the latter suitable
for inclusion in the vDSO library.
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Split time32.h into linux and common headers to make the latter suitable
for inclusion in the vDSO library.
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Split time.h into linux and common headers to make the latter suitable
for inclusion in the vDSO library.
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Split math64.h into linux and common headers to make the latter suitable
for inclusion in the vDSO library.
linux/clocksource.h: Extract common header for vDSO
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Split clocksource.h into linux and common headers to make the latter
suitable for inclusion in the vDSO library.
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Introduce asm/vdso/clocksource.h to contain all the arm64 specific
functions that are suitable for vDSO inclusion.
This header will be required by a future patch that will generalize
vdso/clocksource.h.
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Introduce asm/vdso/clocksource.h to contain all the arm64 specific
functions that are suitable for vDSO inclusion.
This header will be required by a future patch that will generalize
vdso/clocksource.h.
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Introduce asm/vdso/clocksource.h to contain all the arm64 specific
functions that are suitable for vDSO inclusion.
This header will be required by a future patch that will generalize
vdso/clocksource.h.
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Introduce asm/vdso/clocksource.h to contain all the arm64 specific
functions that are suitable for vDSO inclusion.
This header will be required by a future patch that will generalize
vdso/clocksource.h.
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Split limits.h into linux and common headers to make the latter suitable
for inclusion in the vDSO library.
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Split bits.h into linux and common headers to make the latter suitable
for inclusion in the vDSO library.
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Split const.h into linux and common headers to make the latter suitable
for inclusion in the vDSO library.
To minimize latency, PREEMPT_RT kernels expires hrtimers in preemptible
softirq context by default. This can be overriden by marking the timer's
expiry with HRTIMER_MODE_HARD.
sched_clock_timer is missing this annotation: if its callback is preempted
and the duration of the preemption exceeds the wrap around time of the
underlying clocksource, sched clock will get out of sync.
Mark the sched_clock_timer for expiry in hard interrupt context.
Saravana Kannan [Sat, 11 Jan 2020 05:21:25 +0000 (21:21 -0800)]
clocksource/drivers/timer-probe: Avoid creating dead devices
Timer initialization is done during early boot way before the driver
core starts processing devices and drivers. Timers initialized during
this early boot period don't really need or use a struct device.
However, for timers represented as device tree nodes, the struct devices
are still created and sit around unused and wasting memory. This change
avoid this by marking the device tree nodes as "populated" if the
corresponding timer is successfully initialized.
Lokesh Vutla [Thu, 5 Mar 2020 08:27:15 +0000 (13:57 +0530)]
clocksource/drivers/timer-ti-dm: Enable autoreload in set_pwm
dm timer ops set_load() api allows to configure the load value and to
set the auto reload feature. But auto reload feature is independent of
load value and should be part of configuring pwm. This way pwm can be
disabled by disabling auto reload feature using set_pwm() so that the
current pwm cycle will be completed. Else pwm disabling causes the
cycle to be stopped abruptly.
Lokesh Vutla [Thu, 5 Mar 2020 08:27:14 +0000 (13:57 +0530)]
clocksource/drivers/timer-ti-dm: Add support to get pwm current status
omap_dm_timer_ops provide support to configure the pwm but there is no
support to get the current status. For configuring pwm it is advised to
check the current hw status instead of relying on pwm framework. So
implement a new timer ops to get the current status of pwm.
Lokesh Vutla [Thu, 5 Mar 2020 08:27:13 +0000 (13:57 +0530)]
clocksource/drivers/timer-ti-dm: Do not update counter on updating the period
Write to trigger register(OMAP_TIMER_TRIGGER_REG) will load the value
in Load register(OMAP_TIMER_LOAD_REG) into Counter register
(OMAP_TIMER_COUNTER_REG).
omap_dm_timer_set_load() writes into trigger register every time load
register is updated. When timer is configured in pwm mode, this causes
disruption in current pwm cycle, which is not expected especially when
pwm is used as PPS signal for synchronized PTP clocks. So do not write
into trigger register on updating the period.
Lokesh Vutla [Mon, 16 Mar 2020 11:14:53 +0000 (16:44 +0530)]
clocksource/drivers/timer-ti-dm: Implement cpu_pm notifier for context save and restore
omap_dm_timer_enable() restores the entire context(including counter)
based on 2 conditions:
- If get_context_loss_count is populated and context is lost.
- If get_context_loss_count is not populated update unconditionally.
Case2 has a side effect of updating the counter register even though
context is not lost. When timer is configured in pwm mode, this is
causing undesired behaviour in the pwm period.
Instead of using get_context_loss_count call back, implement cpu_pm
notifier with context save and restore support. And delete the
get_context_loss_count callback all together.
Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[tony@atomide.com: removed pm_runtime calls from cpuidle calls] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200316111453.15441-1-lokeshvutla@ti.com
Tony Lindgren [Thu, 5 Mar 2020 08:27:11 +0000 (13:57 +0530)]
clocksource/drivers/timer-ti-dm: Prepare for using cpuidle
Let's add runtime_suspend and resume functions and atomic enabled
flag. This way we can use these when converting to use cpuidle
for saving and restoring device context.
And we need to maintain the driver state in the driver as documented
in "9. Autosuspend, or automatically-delayed suspends" in the
Documentation/power/runtime_pm.rst document related to using driver
private lock and races with runtime_suspend().
Claudiu Beznea [Mon, 16 Mar 2020 09:52:56 +0000 (11:52 +0200)]
clocksource/drivers/timer-microchip-pit64b: Fix rate for gck
Generic clock rate needs to be set in case it was selected as timer clock
source in mchp_pit64b_init_mode(). Otherwise it will be enabled with wrong
rate.
afzal mohammed [Thu, 12 Mar 2020 06:48:17 +0000 (12:18 +0530)]
clocksource/drivers/timer-cs5535: Request irq with non-NULL dev_id
Recently all usages of setup_irq() was replaced by request_irq().
request_irq() does a few sanity checks that were not done in
setup_irq(), if they fail irq registration will fail. One of the check
is to ensure that non-NULL dev_id is passed in the case of shared irq.
Fix it by passing non-NULL dev_id while registering the shared irq.
Waiman Long [Fri, 7 Feb 2020 19:39:29 +0000 (14:39 -0500)]
tick/common: Make tick_periodic() check for missing ticks
The tick_periodic() function is used at the beginning part of the
bootup process for time keeping while the other clock sources are
being initialized.
The current code assumes that all the timer interrupts are handled in
a timely manner with no missing ticks. That is not actually true. Some
ticks are missed and there are some discrepancies between the tick time
(jiffies) and the timestamp reported in the kernel log. Some systems,
however, are more prone to missing ticks than the others. In the extreme
case, the discrepancy can actually cause a soft lockup message to be
printed by the watchdog kthread. For example, on a Cavium ThunderX2
Sabre arm64 system:
On that system, the missing ticks are especially prevalent during the
smp_init() phase of the boot process. With an instrumented kernel,
it was found that it took about 24s as reported by the timestamp for
the tick to accumulate 4s of time.
Investigation and bisection done by others seemed to point to the
commit 73f381660959 ("arm64: Advertise mitigation of Spectre-v2, or
lack thereof") as the culprit. It could also be a firmware issue as
new firmware was promised that would fix the issue.
To properly address this problem, stop assuming that there will be no
missing tick in tick_periodic(). Modify it to follow the example of
tick_do_update_jiffies64() by using another reference clock to check for
missing ticks. Since the watchdog timer uses running_clock(), it is used
here as the reference. With this applied, the soft lockup problem in the
affected arm64 system is gone and tick time tracks much more closely to the
timestamp time.
Wen Yang [Thu, 30 Jan 2020 13:08:51 +0000 (21:08 +0800)]
hrtimer: Cast explicitely to u32t in __ktime_divns()
do_div() does a 64-by-32 division at least on 32bit platforms, while the
divisor 'div' is explicitly casted to unsigned long, thus 64-bit on 64-bit
platforms.
The code already ensures that the divisor is less than 2^32. Hence the
proper cast type is u32.
Wen Yang [Mon, 20 Jan 2020 10:05:23 +0000 (18:05 +0800)]
timekeeping: Prevent 32bit truncation in scale64_check_overflow()
While unlikely the divisor in scale64_check_overflow() could be >= 32bit in
scale64_check_overflow(). do_div() truncates the divisor to 32bit at least
on 32bit platforms.
Use div64_u64() instead to avoid the truncation to 32-bit.
posix-cpu-timers: Stop disabling timers on mt-exec
The reasons why the extra posix_cpu_timers_exit_group() invocation has been
added are not entirely clear from the commit message. Today all that
posix_cpu_timers_exit_group() does is stop timers that are tracking the
task from firing. Every other operation on those timers is still allowed.
The practical implication of this is posix_cpu_timer_del() which could
not get the siglock after the thread group leader has exited (because
sighand == NULL) would be able to run successfully because the timer
was already dequeued.
With that locking issue fixed there is no point in disabling all of the
timers. So remove this ``tempoary'' hack.
Fixes: e0a70217107e ("posix-cpu-timers: workaround to suppress the problems with mt exec") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/87o8tityzs.fsf@x220.int.ebiederm.org
posix-cpu-timers: Store a reference to a pid not a task
posix cpu timers do not handle the death of a process well.
This is most clearly seen when a multi-threaded process calls exec from a
thread that is not the leader of the thread group. The posix cpu timer code
continues to pin the old thread group leader and is unable to find the
siglock from there.
This results in posix_cpu_timer_del being unable to delete a timer,
posix_cpu_timer_set being unable to set a timer. Further to compensate for
the problems in posix_cpu_timer_del on a multi-threaded exec all timers
that point at the multi-threaded task are stopped.
The code for the timers fundamentally needs to check if the target
process/thread is alive. This needs an extra level of indirection. This
level of indirection is already available in struct pid.
So replace cpu.task with cpu.pid to get the needed extra layer of
indirection.
In addition to handling things more cleanly this reduces the amount of
memory a timer can pin when a process exits and then is reaped from
a task_struct to the vastly smaller struct pid.
Fixes: e0a70217107e ("posix-cpu-timers: workaround to suppress the problems with mt exec") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/87wo86tz6d.fsf@x220.int.ebiederm.org
posix-cpu-timers: Remove unnecessary locking around cpu_clock_sample_group
As of e78c3496790e ("time, signal: Protect resource use statistics
with seqlock") cpu_clock_sample_group no longers needs siglock
protection. Unfortunately no one realized it at the time.
Remove the extra locking that is for cpu_clock_sample_group and not
for cpu_clock_sample. This significantly simplifies the code.
posix-cpu-timers: cpu_clock_sample_group() no longer needs siglock
As of e78c3496790e ("time, signal: Protect resource use statistics with
seqlock") cpu_clock_sample_group() no longer needs siglock protection so
remove the stale comment.
afzal mohammed [Thu, 27 Feb 2020 10:59:02 +0000 (16:29 +0530)]
clocksource: Replace setup_irq() by request_irq()
request_irq() is preferred over setup_irq(). The early boot setup_irq()
invocations happen either via 'init_IRQ()' or 'time_init()', while
memory allocators are ready by 'mm_init()'.
Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().
A build error that was reported by kbuild test robot <lkp@intel.com>
in the previous version of the patch also has been fixed.
Suman Anna [Thu, 13 Feb 2020 05:35:04 +0000 (23:35 -0600)]
clocksource/drivers/timer-ti-dm: Drop bogus omap_dm_timer_of_set_source()
The function omap_dm_timer_of_set_source() was originally added in
commit 31a7448f4fa8a ("ARM: OMAP: dmtimer: Add clock source from DT"),
and is designed to set a clock source from DT using the clocks property
of a timer node. This design choice is okay for clk provider nodes but
otherwise is a bad design as typically the clocks property is used to
specify the functional clocks for a device, and not its parents.
The timer nodes now all define a timer functional clock after the
conversion to ti-sysc and the new clkctrl layout, and this results
in an attempt to set the same functional clock as its parent when a
consumer driver attempts to acquire any of these timers in the
omap_dm_timer_prepare() function. This was masked and worked around
in commit 983a5a43ec25 ("clocksource: timer-ti-dm: Fix pwm dmtimer
usage of fck reparenting"). Fix all of this by simply dropping the
entire function.
Any DT configuration of clock sources should be achieved using
assigned-clocks and assigned-clock-parents properties provided
by the Common Clock Framework.
Cc: Tony Lindgren <tony@atomide.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Suman Anna <s-anna@ti.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200213053504.22638-1-s-anna@ti.com
Lokesh Vutla [Mon, 24 Feb 2020 05:07:53 +0000 (10:37 +0530)]
clocksource/drivers/timer-ti-dm: Do not update counter on updating the period
Write to trigger register(OMAP_TIMER_TRIGGER_REG) will load the value
in Load register(OMAP_TIMER_LOAD_REG) into Counter register
(OMAP_TIMER_COUNTER_REG).
omap_dm_timer_set_load() writes into trigger register every time load
register is updated. When timer is configured in pwm mode, this causes
disruption in current pwm cycle, which is not expected especially when
pwm is used as PPS signal for synchronized PTP clocks. So do not write
into trigger register on updating the period.
clocksource/drivers/arm_arch_timer: Fix vDSO clockmode when vDSO disabled
The arm_arch_timer requires VDSO_CLOCKMODE_ARCHTIMER to be defined to
compile correctly. On ARM the vDSO can be disabled and when this is the
case the compilation ends prematurely with an error:
$ make ARCH=arm multi_v7_defconfig
$ ./scripts/config -d VDSO
$ make
drivers/clocksource/arm_arch_timer.c:73:44: error:
‘VDSO_CLOCKMODE_ARCHTIMER’ undeclared here (not in a function)
static enum vdso_clock_mode vdso_default = VDSO_CLOCKMODE_ARCHTIMER;
Make the usage of VDSO_CLOCKMODE_ARCHTIMER depend on the VDSO enablement
and initialize the vdso clockmode variable with VDSO_CLOCKMODE_NONE
otherwise.
[ tglx: Match changelog and patch content. ]
Fixes: 5e3c6a312a09 ("ARM/arm64: vdso: Use common vdso clock mode storage") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200224151552.57274-1-vincenzo.frascino@arm.com
Joel Stanley [Thu, 7 Nov 2019 09:42:18 +0000 (20:12 +1030)]
dt-bindings: fttmr010: Add ast2600 compatible
The ast2600 contains a fttmr010 derivative.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191107094218.13210-5-joel@jms.id.au
Joel Stanley [Thu, 7 Nov 2019 09:42:16 +0000 (20:12 +1030)]
clocksource/drivers/fttmr010: Set interrupt and shutdown
In preparation for supporting the ast2600, pass the shutdown and
interrupt functions to the common init callback.
Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191107094218.13210-3-joel@jms.id.au
In preparation for supporting the ast2600 which uses a different method
to clear bits in the control register, use a callback for performing the
shutdown sequence.
Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191107094218.13210-2-joel@jms.id.au
Alexander Popov [Fri, 17 Jan 2020 22:59:00 +0000 (01:59 +0300)]
timer: Improve the comment describing schedule_timeout()
When working commit 6dcd5d7a7a29c1e, a mistake was noticed by Linus:
schedule_timeout() was called without setting the task state to anything
particular.
It calls the scheduler, but doesn't delay anything, because the task stays
runnable. That happens because sched_submit_work() does nothing for tasks
in TASK_RUNNING state.
That turned out to be the intended behavior. Adding a WARN() is not useful
as the task could be woken up right after setting the state and before
reaching schedule_timeout().
Improve the comment about schedule_timeout() and describe that more
explicitly.
lib/vdso: Allow architectures to provide the vdso data pointer
On powerpc, __arch_get_vdso_data() clobbers the link register, requiring
the caller to save it.
As the parent function already has to set a stack frame and saves the link
register before calling the C vdso function, retrieving the vdso data
pointer there is less overhead.
Split out the functional code from the __cvdso.*() interfaces into new
static functions which can either be called from the existing interfaces
with the vdso data pointer supplied via __arch_get_vdso_data() or directly
from ASM code.
lib/vdso: Allow architectures to override the ns shift operation
On powerpc/32, GCC (8.1) generates pretty bad code for the ns >>= vd->shift
operation taking into account that the shift is always <= 32 and the upper
part of the result is likely to be zero. GCC makes reversed assumptions
considering the shift to be likely >= 32 and the upper part to be like not
zero.
unsigned long long shift(unsigned long long x, unsigned char s)
{
return x >> s;
}
Some architectures have a fixed clocksource which is known at compile time
and cannot be replaced or disabled at runtime, e.g. timebase on
PowerPC. For such cases the clock mode check in the VDSO code is pointless.
Move the check for a VDSO capable clocksource into an inline function and
allow architectures to redefine it via a macro.
Thomas Gleixner [Fri, 7 Feb 2020 12:38:54 +0000 (13:38 +0100)]
x86/vdso: Move VDSO clocksource state tracking to callback
All architectures which use the generic VDSO code have their own storage
for the VDSO clock mode. That's pointless and just requires duplicate code.
X86 abuses the function which retrieves the architecture specific clock
mode storage to mark the clocksource as used in the VDSO. That's silly
because this is invoked on every tick when the VDSO data is updated.
Move this functionality to the clocksource::enable() callback so it gets
invoked once when the clocksource is installed. This allows to make the
clock mode storage generic.
Thomas Gleixner [Fri, 7 Feb 2020 12:38:52 +0000 (13:38 +0100)]
MIPS: vdso: Compile high resolution parts conditionally
If neither the R4K nor the GIC timer is enabled in the kernel configuration
then let the core VDSO code drop the high resolution parts at compile time.
Thomas Gleixner [Fri, 7 Feb 2020 12:38:50 +0000 (13:38 +0100)]
lib/vdso: Allow the high resolution parts to be compiled out
If the architecture knows at compile time that there is no VDSO capable
clocksource supported it makes sense to optimize the guts of the high
resolution parts of the VDSO out at build time. Add a helper function to
check whether the VDSO should be high resolution capable and provide a stub
which can be overridden by an architecture.
Thomas Gleixner [Fri, 7 Feb 2020 12:38:49 +0000 (13:38 +0100)]
ARM: vdso: Remove unused function
The function is nowhere used. Aside of that this check should only cover
the high resolution parts of the VDSO which require a VDSO capable
clocksource and not the complete functionality as the name suggests. Will
be replaced with something more useful.
Thomas Gleixner [Fri, 7 Feb 2020 12:38:48 +0000 (13:38 +0100)]
x86/vdso: Mark the TSC clocksource path likely
Jumping out of line for the TSC clcoksource read is creating awful
code. TSC is likely to be the clocksource at least on bare metal and the PV
interfaces are sufficiently more work that the jump over the TSC read is
just in the noise.
Linus Torvalds [Sun, 16 Feb 2020 21:05:46 +0000 (13:05 -0800)]
Merge tag 'for-linus-5.6-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI update from Corey Minyard:
"Minor bug fixes for IPMI
I know this is late; I've been travelling and, well, I've been
distracted.
This is just a few bug fixes and adding i2c support to the IPMB
driver, which is something I wanted from the beginning for it"
* tag 'for-linus-5.6-1' of https://github.com/cminyard/linux-ipmi:
drivers: ipmi: fix off-by-one bounds check that leads to a out-of-bounds write
ipmi:ssif: Handle a possible NULL pointer reference
drivers: ipmi: Modify max length of IPMB packet
drivers: ipmi: Support raw i2c packet in IPMB
Linus Torvalds [Sun, 16 Feb 2020 21:01:42 +0000 (13:01 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bugfixes and improvements to selftests.
On top of this, Mauro converted the KVM documentation to rst format,
which was very welcome"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
docs: virt: guest-halt-polling.txt convert to ReST
docs: kvm: review-checklist.txt: rename to ReST
docs: kvm: Convert timekeeping.txt to ReST format
docs: kvm: Convert s390-diag.txt to ReST format
docs: kvm: Convert ppc-pv.txt to ReST format
docs: kvm: Convert nested-vmx.txt to ReST format
docs: kvm: Convert mmu.txt to ReST format
docs: kvm: Convert locking.txt to ReST format
docs: kvm: Convert hypercalls.txt to ReST format
docs: kvm: arm/psci.txt: convert to ReST
docs: kvm: convert arm/hyp-abi.txt to ReST
docs: kvm: Convert api.txt to ReST format
docs: kvm: convert devices/xive.txt to ReST
docs: kvm: convert devices/xics.txt to ReST
docs: kvm: convert devices/vm.txt to ReST
docs: kvm: convert devices/vfio.txt to ReST
docs: kvm: convert devices/vcpu.txt to ReST
docs: kvm: convert devices/s390_flic.txt to ReST
docs: kvm: convert devices/mpic.txt to ReST
docs: kvm: convert devices/arm-vgit.txt to ReST
...
Linus Torvalds [Sun, 16 Feb 2020 20:49:36 +0000 (12:49 -0800)]
Merge tag 'edac_urgent_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Two fixes for use-after-free and memory leaking in the EDAC core, by
Robert Richter.
Debug options like DEBUG_TEST_DRIVER_REMOVE, KASAN and DEBUG_KMEMLEAK
unearthed issues with the lifespan of memory allocated by the EDAC
memory controller descriptor due to misdesigned memory freeing, done
partially by the EDAC core *and* the driver core, which is problematic
to say the least.
These two are minimal fixes to take care of stable - a proper rework
is following which cleans up that mess properly"
* tag 'edac_urgent_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/sysfs: Remove csrow objects on errors
EDAC/mc: Fix use-after-free and memleaks during device removal
Linus Torvalds [Sun, 16 Feb 2020 20:35:52 +0000 (12:35 -0800)]
Merge tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Not a lot here, which is great, basically just three small bcache
fixes from Coly, and four NVMe fixes via Keith"
* tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block:
nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info
nvme/pci: move cqe check after device shutdown
nvme: prevent warning triggered by nvme_stop_keep_alive
nvme/tcp: fix bug on double requeue when send fails
bcache: remove macro nr_to_fifo_front()
bcache: Revert "bcache: shrink btree node cache after bch_btree_check()"
bcache: ignore pending signals when creating gc and allocator thread
Linus Torvalds [Sun, 16 Feb 2020 19:43:45 +0000 (11:43 -0800)]
Merge tag 'for-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two races fixed, memory leak fix, sysfs directory fixup and two new
log messages:
- two fixed race conditions: extent map merging and truncate vs
fiemap
- create the right sysfs directory with device information and move
the individual device dirs under it
- print messages when the tree-log is replayed at mount time or
cannot be replayed on remount"
* tag 'for-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: sysfs, move device id directories to UUID/devinfo
btrfs: sysfs, add UUID/devinfo kobject
Btrfs: fix race between shrinking truncate and fiemap
btrfs: log message when rw remount is attempted with unclean tree-log
btrfs: print message when tree-log replay starts
Btrfs: fix race between using extent maps and merging them
btrfs: ref-verify: fix memory leaks
Linus Torvalds [Sun, 16 Feb 2020 19:41:29 +0000 (11:41 -0800)]
Merge tag '5.6-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four small CIFS/SMB3 fixes. One (the EA overflow fix) for stable"
* tag '5.6-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: make sure we do not overflow the max EA buffer size
cifs: enable change notification for SMB2.1 dialect
cifs: Fix mode output in debugging statements
cifs: fix mount option display for sec=krb5i
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: improve explanation of a mount failure caused by a misconfigured kernel
jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer
jbd2: move the clearing of b_modified flag to the journal_unmap_buffer()
ext4: add cond_resched() to ext4_protect_reserved_inode
ext4: fix checksum errors with indexed dirs
ext4: fix support for inode sizes > 1024 bytes
ext4: simplify checking quota limits in ext4_statfs()
ext4: don't assume that mmp_nodename/bdevname have NUL
Linus Torvalds [Sun, 16 Feb 2020 00:49:25 +0000 (16:49 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a few drivers have been updated to use flexible-array syntax instead
of GCC extension
- ili210x touchscreen driver now supports the 2120 protocol flavor
- a couple more of Synaptics devices have been switched over to RMI4
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cyapa - replace zero-length array with flexible-array member
Input: tca6416-keypad - replace zero-length array with flexible-array member
Input: gpio_keys_polled - replace zero-length array with flexible-array member
Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list
Input: synaptics - enable SMBus on ThinkPad L470
Input: synaptics - switch T470s to RMI4 by default
Input: gpio_keys - replace zero-length array with flexible-array member
Input: goldfish_events - replace zero-length array with flexible-array member
Input: psmouse - switch to using i2c_new_scanned_device()
Input: ili210x - add ili2120 support
Input: ili210x - fix return value of is_visible function
Linus Torvalds [Sun, 16 Feb 2020 00:38:49 +0000 (16:38 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Not too much going on here, though there are about four fixes related
to stuff merged during the last merge window.
We also see the return of a syzkaller instance with access to RDMA
devices, and a few bugs detected by that squished.
- Fix three crashers and a memory memory leak for HFI1
- Several bugs found by syzkaller
- A bug fix for the recent QP counters feature on older mlx5 HW
- Locking inversion in cxgb4
- Unnecessary WARN_ON in siw
- A umad crasher regression during unload, from a bug fix for
something else
- Bugs introduced in the merge window:
- Missed list_del in uverbs file rework, core and mlx5 devx
- Unexpected integer math truncation in the mlx5 VAR patches
- Compilation bug fix for the VAR patches on 32 bit"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Use div64_u64 for num_var_hw_entries calculation
RDMA/core: Fix protection fault in get_pkey_idx_qp_list
RDMA/rxe: Fix soft lockup problem due to using tasklets in softirq
RDMA/mlx5: Prevent overflow in mmap offset calculations
IB/umad: Fix kernel crash while unloading ib_umad
RDMA/mlx5: Fix async events cleanup flows
RDMA/core: Add missing list deletion on freeing event queue
RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready()
RDMA/iw_cxgb4: initiate CLOSE when entering TERM
IB/mlx5: Return failure when rts2rts_qp_counters_set_id is not supported
RDMA/core: Fix invalid memory access in spec_filter_size
IB/rdmavt: Reset all QPs when the device is shut down
IB/hfi1: Close window for pq and request coliding
IB/hfi1: Acquire lock to release TID entries when user file is closed
RDMA/hfi1: Fix memory leak in _dev_comp_vect_mappings_create
Linus Torvalds [Sat, 15 Feb 2020 21:10:38 +0000 (13:10 -0800)]
Merge tag 's390-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Enable paes-s390 cipher selftests in testmgr (acked-by Herbert Xu).
- Fix protected key length update in PKEY_SEC2PROTK ioctl and increase
card/queue requests counter to 64-bit in crypto code.
- Fix clang warning in get_tod_clock.
- Fix ultravisor info length extensions handling.
- Fix style of SPDX License Identifier in vfio-ccw.
- Avoid unnecessary GFP_ATOMIC and simplify ACK tracking in qdio.
* tag 's390-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
crypto/testmgr: enable selftests for paes-s390 ciphers
s390/time: Fix clk type in get_tod_clock
s390/uv: Fix handling of length extensions
s390/qdio: don't allocate *aob array with GFP_ATOMIC
s390/qdio: simplify ACK tracking
s390/zcrypt: fix card and queue total counter wrap
s390/pkey: fix missing length of protected key on return
vfio-ccw: Use the correct style for SPDX License Identifier
Linus Torvalds [Sat, 15 Feb 2020 21:03:50 +0000 (13:03 -0800)]
Merge tag 'hwmon-for-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix compatible string typos in the xdpe12284 driver, and a wrong bit
value in the ltc2978 driver"
* tag 'hwmon-for-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/xdpe12284) fix typo in compatible strings
hwmon: (pmbus/ltc2978) Fix PMBus polling of MFR_COMMON definitions.
Linus Torvalds [Sat, 15 Feb 2020 20:51:22 +0000 (12:51 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixes all over the place:
- Fix NUMA over-balancing between lightly loaded nodes. This is
fallout of the big load-balancer rewrite.
- Fix the NOHZ remote loadavg update logic, which fixes anomalies
like reported 150 loadavg on mostly idle CPUs.
- Fix XFS performance/scalability
- Fix throttled groups unbound task-execution bug
- Fix PSI procfs boundary condition
- Fix the cpu.uclamp.{min,max} cgroup configuration write checks
- Fix DocBook annotations
- Fix RCU annotations
- Fix overly CPU-intensive housekeeper CPU logic loop on large CPU
counts"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix kernel-doc warning in attach_entity_load_avg()
sched/core: Annotate curr pointer in rq with __rcu
sched/psi: Fix OOB write when writing 0 bytes to PSI files
sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression
sched/fair: Prevent unlimited runtime on throttled group
sched/nohz: Optimize get_nohz_timer_target()
sched/uclamp: Reject negative values in cpu_uclamp_write()
sched/fair: Allow a small load imbalance between low utilisation SD_NUMA domains
timers/nohz: Update NOHZ load in remote tick
sched/core: Don't skip remote tick for idle CPUs
Linus Torvalds [Sat, 15 Feb 2020 20:30:42 +0000 (12:30 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Fixes and HW enablement patches:
- Tooling fixes, most of which are tooling header synchronization
with v5.6 changes
- Fix kprobes fallout on ARM
- Add Intel Elkhart Lake support and extend Tremont support, these
are relatively simple and should only affect those models
- Fix the AMD family 17h generic event table"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
perf llvm: Fix script used to obtain kernel make directives to work with new kbuild
tools headers kvm: Sync linux/kvm.h with the kernel sources
tools headers kvm: Sync kvm headers with the kernel sources
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
tools headers x86: Sync disabled-features.h
tools include UAPI: Sync sound/asound.h copy
tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
perf tools: Add arm64 version of get_cpuid()
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers uapi: Sync linux/fscrypt.h with the kernel sources
tools headers UAPI: Sync sched.h with the kernel
perf trace: Resolve prctl's 'option' arg strings to numbers
perf beauty prctl: Export the 'options' strarray
tools headers UAPI: Sync prctl.h with the kernel sources
tools headers UAPI: Sync copy of arm64's asm/unistd.h with the kernel sources
perf maps: Move kmap::kmaps setup to maps__insert()
perf maps: Fix map__clone() for struct kmap
perf maps: Mark ksymbol DSOs with kernel type
perf maps: Mark module DSOs with kernel type
tools include UAPI: Sync x86's syscalls_64.tbl, generic unistd.h and fcntl.h to pick up openat2 and pidfd_getfd
...
Marek Behún [Sat, 15 Feb 2020 14:21:30 +0000 (15:21 +0100)]
bus: moxtet: fix potential stack buffer overflow
The input_read function declares the size of the hex array relative to
sizeof(buf), but buf is a pointer argument of the function. The hex
array is meant to contain hexadecimal representation of the bin array.
Theodore Ts'o [Fri, 14 Feb 2020 23:11:19 +0000 (18:11 -0500)]
ext4: improve explanation of a mount failure caused by a misconfigured kernel
If CONFIG_QFMT_V2 is not enabled, but CONFIG_QUOTA is enabled, when a
user tries to mount a file system with the quota or project quota
enabled, the kernel will emit a very confusing messsage:
EXT4-fs warning (device vdc): ext4_enable_quotas:5914: Failed to enable quota tracking (type=0, err=-3). Please run e2fsck to fix.
EXT4-fs (vdc): mount failed
We will now report an explanatory message indicating which kernel
configuration options have to be enabled, to avoid customer/sysadmin
confusion.
Ingo Molnar [Sat, 15 Feb 2020 08:35:11 +0000 (09:35 +0100)]
Merge tag 'perf-urgent-for-mingo-5.6-20200214' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
BPF:
Arnaldo Carvalho de Melo:
- Fix script used to obtain kernel make directives to work with new kbuild
used for building BPF programs.
maps:
Jiri Olsa:
- Fixup kmap->kmaps backpointer in kernel maps.
arm64:
John Garry:
- Add arm64 version of get_cpuid() to get proper, arm64 specific output from
'perf list' and other tools.
perf top:
Kim Phillips:
- Update kernel idle symbols so that output in AMD systems is in line with
other systems.
perf stat:
Kim Phillips:
- Don't report a null stalled cycles per insn metric.
tools headers:
Arnaldo Carvalho de Melo:
- Sync tools/ headers with the kernel sources to get things like syscall
numbers and new arguments so that 'perf trace' can decode and use them in
tracepoint filters, e.g. prctl's new PR_{G,S}ET_IO_FLUSHER options.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
projects / mirror_ubuntu-hirsute-kernel.git / log