Naoya Horiguchi [Thu, 6 Aug 2015 22:47:11 +0000 (15:47 -0700)]
mm/memory-failure: set PageHWPoison before migrate_pages()
Now page freeing code doesn't consider PageHWPoison as a bad page, so by
setting it before completing the page containment, we can prevent the
error page from being reused just after successful page migration.
I added TTU_IGNORE_HWPOISON for try_to_unmap() to make sure that the
page table entry is transformed into migration entry, not to hwpoison
entry.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dean Nelson <dnelson@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Hugh Dickins <hughd@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Thu, 6 Aug 2015 22:47:08 +0000 (15:47 -0700)]
mm: check __PG_HWPOISON separately from PAGE_FLAGS_CHECK_AT_*
The race condition addressed in commit add05cecef80 ("mm: soft-offline:
don't free target page in successful page migration") was not closed
completely, because that can happen not only for soft-offline, but also
for hard-offline. Consider that a slab page is about to be freed into
buddy pool, and then an uncorrected memory error hits the page just
after entering __free_one_page(), then VM_BUG_ON_PAGE(page->flags &
PAGE_FLAGS_CHECK_AT_PREP) is triggered, despite the fact that it's not
necessary because the data on the affected page is not consumed.
To solve it, this patch drops __PG_HWPOISON from page flag checks at
allocation/free time. I think it's justified because __PG_HWPOISON
flags is defined to prevent the page from being reused, and setting it
outside the page's alloc-free cycle is a designed behavior (not a bug.)
For recent months, I was annoyed about BUG_ON when soft-offlined page
remains on lru cache list for a while, which is avoided by calling
put_page() instead of putback_lru_page() in page migration's success
path. This means that this patch reverts a major change from commit add05cecef80 about the new refcounting rule of soft-offlined pages, so
"reuse window" revives. This will be closed by a subsequent patch.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dean Nelson <dnelson@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Hugh Dickins <hughd@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Thu, 6 Aug 2015 22:47:04 +0000 (15:47 -0700)]
mm/memory-failure: give up error handling for non-tail-refcounted thp
"non anonymous thp" case is still racy with freeing thp, which causes
panic due to put_page() for refcount-0 page. It seems that closing up
this race might be hard (and/or not worth doing,) so let's give up the
error handling for this case.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dean Nelson <dnelson@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Hugh Dickins <hughd@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Thu, 6 Aug 2015 22:47:01 +0000 (15:47 -0700)]
mm/memory-failure: fix race in counting num_poisoned_pages
When memory_failure() is called on a page which are just freed after
page migration from soft offlining, the counter num_poisoned_pages is
raised twi= ce. So let's fix it with using TestSetPageHWPoison.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dean Nelson <dnelson@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Hugh Dickins <hughd@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Thu, 6 Aug 2015 22:46:58 +0000 (15:46 -0700)]
mm/memory-failure: unlock_page before put_page
Recently I addressed a few of hwpoison race problems and the patches are
merged on v4.2-rc1. It made progress, but unfortunately some problems
still remain due to less coverage of my testing. So I'm trying to fix
or avoid them in this series.
One point I'm expecting to discuss is that patch 4/5 changes the page
flag set to be checked on free time. In current behavior, __PG_HWPOISON
is not supposed to be set when the page is freed. I think that there is
no strong reason for this behavior, and it causes a problem hard to fix
only in error handler side (because __PG_HWPOISON could be set at
arbitrary timing.) So I suggest to change it.
With this patchset, hwpoison stress testing in official mce-test
testsuite (which previously failed) passes.
This patch (of 5):
In "just unpoisoned" path, we do put_page and then unlock_page, which is
a wrong order and causes "freeing locked page" bug. So let's fix it.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dean Nelson <dnelson@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Hugh Dickins <hughd@google.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephen Smalley [Thu, 6 Aug 2015 22:46:55 +0000 (15:46 -0700)]
ipc: use private shmem or hugetlbfs inodes for shm segments.
The shm implementation internally uses shmem or hugetlbfs inodes for shm
segments. As these inodes are never directly exposed to userspace and
only accessed through the shm operations which are already hooked by
security modules, mark the inodes with the S_PRIVATE flag so that inode
security initialization and permission checking is skipped.
This was motivated by the following lockdep warning:
======================================================
[ INFO: possible circular locking dependency detected ]
4.2.0-0.rc3.git0.1.fc24.x86_64+debug #1 Tainted: G W
-------------------------------------------------------
httpd/1597 is trying to acquire lock:
(&ids->rwsem){+++++.}, at: shm_close+0x34/0x130
but task is already holding lock:
(&mm->mmap_sem){++++++}, at: SyS_shmdt+0x4b/0x180
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&mm->mmap_sem){++++++}:
lock_acquire+0xc7/0x270
__might_fault+0x7a/0xa0
filldir+0x9e/0x130
xfs_dir2_block_getdents.isra.12+0x198/0x1c0 [xfs]
xfs_readdir+0x1b4/0x330 [xfs]
xfs_file_readdir+0x2b/0x30 [xfs]
iterate_dir+0x97/0x130
SyS_getdents+0x91/0x120
entry_SYSCALL_64_fastpath+0x12/0x76
-> #2 (&xfs_dir_ilock_class){++++.+}:
lock_acquire+0xc7/0x270
down_read_nested+0x57/0xa0
xfs_ilock+0x167/0x350 [xfs]
xfs_ilock_attr_map_shared+0x38/0x50 [xfs]
xfs_attr_get+0xbd/0x190 [xfs]
xfs_xattr_get+0x3d/0x70 [xfs]
generic_getxattr+0x4f/0x70
inode_doinit_with_dentry+0x162/0x670
sb_finish_set_opts+0xd9/0x230
selinux_set_mnt_opts+0x35c/0x660
superblock_doinit+0x77/0xf0
delayed_superblock_init+0x10/0x20
iterate_supers+0xb3/0x110
selinux_complete_init+0x2f/0x40
security_load_policy+0x103/0x600
sel_write_load+0xc1/0x750
__vfs_write+0x37/0x100
vfs_write+0xa9/0x1a0
SyS_write+0x58/0xd0
entry_SYSCALL_64_fastpath+0x12/0x76
...
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Reported-by: Morten Stevens <mstevens@fedoraproject.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Paul Moore <paul@paul-moore.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Thu, 6 Aug 2015 22:46:51 +0000 (15:46 -0700)]
mm: initialize hotplugged pages as reserved
Commit 92923ca3aace ("mm: meminit: only set page reserved in the
memblock region") broke memory hotplug which expects the memmap for
newly added sections to be reserved until onlined by
online_pages_range(). This patch marks hotplugged pages as reserved
when adding new zones.
Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: David Vrabel <david.vrabel@citrix.com> Tested-by: David Vrabel <david.vrabel@citrix.com> Cc: Nathan Zimmer <nzimmer@sgi.com> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joseph Qi [Thu, 6 Aug 2015 22:46:48 +0000 (15:46 -0700)]
ocfs2: fix shift left overflow
When using a large volume, for example 9T volume with 2T already used,
frequent creation of small files with O_DIRECT when the IO is not
cluster aligned may clear sectors in the wrong place. This will cause
filesystem corruption.
This is because p_cpos is a u32. When calculating the corresponding
sector it should be converted to u64 first, otherwise it may overflow.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> [4.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Kershner [Thu, 6 Aug 2015 22:46:45 +0000 (15:46 -0700)]
kthread: export kthread functions
The s-Par visornic driver, currently in staging, processes a queue being
serviced by the an s-Par service partition. We can get a message that
something has happened with the Service Partition, when that happens, we
must not access the channel until we get a message that the service
partition is back again.
The visornic driver has a thread for processing the channel, when we get
the message, we need to be able to park the thread and then resume it
when the problem clears.
We can do this with kthread_park and unpark but they are not exported
from the kernel, this patch exports the needed functions.
Signed-off-by: David Kershner <david.kershner@unisys.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Weinberger <richard.weinberger@gmail.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Thu, 6 Aug 2015 22:46:42 +0000 (15:46 -0700)]
fsnotify: fix oops in fsnotify_clear_marks_by_group_flags()
fsnotify_clear_marks_by_group_flags() can race with
fsnotify_destroy_marks() so that when fsnotify_destroy_mark_locked()
drops mark_mutex, a mark from the list iterated by
fsnotify_clear_marks_by_group_flags() can be freed and thus the next
entry pointer we have cached may become stale and we dereference free
memory.
Fix the problem by first moving marks to free to a special private list
and then always free the first entry in the special list. This method
is safe even when entries from the list can disappear once we drop the
lock.
Signed-off-by: Jan Kara <jack@suse.com> Reported-by: Ashish Sangwan <a.sangwan@samsung.com> Reviewed-by: Ashish Sangwan <a.sangwan@samsung.com> Cc: Lino Sanfilippo <LinoSanfilippo@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/slub: allow merging when SLAB_DEBUG_FREE is set
This patch fixes creation of new kmem-caches after enabling
sanity_checks for existing mergeable kmem-caches in runtime: before that
patch creation fails because unique name in sysfs already taken by
existing kmem-cache.
Unlike other debug options this doesn't change object layout and could
be enabled and disabled at any time.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
signalfd: fix information leak in signalfd_copyinfo
This function may copy the si_addr_lsb field to user mode when it hasn't
been initialized, which can leak kernel stack data to user mode.
Just checking the value of si_code is insufficient because the same
si_code value is shared between multiple signals. This is solved by
checking the value of si_signo in addition to si_code.
signal: fix information leak in copy_siginfo_to_user
This function may copy the si_addr_lsb, si_lower and si_upper fields to
user mode when they haven't been initialized, which can leak kernel
stack data to user mode.
Just checking the value of si_code is insufficient because the same
si_code value is shared between multiple signals. This is solved by
checking the value of si_signo in addition to si_code.
Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
signal: fix information leak in copy_siginfo_from_user32
This function can leak kernel stack data when the user siginfo_t has a
positive si_code value. The top 16 bits of si_code descibe which fields
in the siginfo_t union are active, but they are treated inconsistently
between copy_siginfo_from_user32, copy_siginfo_to_user32 and
copy_siginfo_to_user.
copy_siginfo_from_user32 is called from rt_sigqueueinfo and
rt_tgsigqueueinfo in which the user has full control overthe top 16 bits
of si_code.
This fixes the following information leaks:
x86: 8 bytes leaked when sending a signal from a 32-bit process to
itself. This leak grows to 16 bytes if the process uses x32.
(si_code = __SI_CHLD)
x86: 100 bytes leaked when sending a signal from a 32-bit process to
a 64-bit process. (si_code = -1)
sparc: 4 bytes leaked when sending a signal from a 32-bit process to a
64-bit process. (si_code = any)
parsic and s390 have similar bugs, but they are not vulnerable because
rt_[tg]sigqueueinfo have checks that prevent sending a positive si_code
to a different process. These bugs are also fixed for consistency.
Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joseph Qi [Thu, 6 Aug 2015 22:46:23 +0000 (15:46 -0700)]
ocfs2: fix BUG in ocfs2_downconvert_thread_do_work()
The "BUG_ON(list_empty(&osb->blocked_lock_list))" in
ocfs2_downconvert_thread_do_work can be triggered in the following case:
ocfs2dc has firstly saved osb->blocked_lock_count to local varibale
processed, and then processes the dentry lockres. During the dentry
put, it calls iput and then deletes rw, inode and open lockres from
blocked list in ocfs2_mark_lockres_freeing. And this causes the
variable `processed' to not reflect the number of blocked lockres to be
processed, which triggers the BUG.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Thu, 6 Aug 2015 22:46:20 +0000 (15:46 -0700)]
fs, file table: reinit files_stat.max_files after deferred memory initialisation
Dave Hansen reported the following;
My laptop has been behaving strangely with 4.2-rc2. Once I log
in to my X session, I start getting all kinds of strange errors
from applications and see this in my dmesg:
VFS: file-max limit 8192 reached
The problem is that the file-max is calculated before memory is fully
initialised and miscalculates how much memory the kernel is using. This
patch recalculates file-max after deferred memory initialisation. Note
that using memory hotplug infrastructure would not have avoided this
problem as the value is not recalculated after memory hot-add.
Nicolai Stange [Thu, 6 Aug 2015 22:46:16 +0000 (15:46 -0700)]
mm, meminit: replace rwsem with completion
Commit 0e1cc95b4cc7 ("mm: meminit: finish initialisation of struct pages
before basic setup") introduced a rwsem to signal completion of the
initialization workers.
Lockdep complains about possible recursive locking:
=============================================
[ INFO: possible recursive locking detected ] 4.1.0-12802-g1dc51b8 #3 Not tainted
---------------------------------------------
swapper/0/1 is trying to acquire lock:
(pgdat_init_rwsem){++++.+},
at: [<ffffffff8424c7fb>] page_alloc_init_late+0xc7/0xe6
but task is already holding lock:
(pgdat_init_rwsem){++++.+},
at: [<ffffffff8424c772>] page_alloc_init_late+0x3e/0xe6
Replace the rwsem by a completion together with an atomic
"outstanding work counter".
[peterz@infradead.org: Barrier removal on the grounds of being pointless]
[mgorman@suse.de: Applied review feedback] Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Alex Ng <alexng@microsoft.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Thu, 6 Aug 2015 22:46:13 +0000 (15:46 -0700)]
mm, meminit: allow early_pfn_to_nid to be used during runtime
early_pfn_to_nid() historically was inherently not SMP safe but only
used during boot which is inherently single threaded or during hotplug
which is protected by a giant mutex.
With deferred memory initialisation there was a thread-safe version
introduced and the early_pfn_to_nid would trigger a BUG_ON if used
unsafely. Memory hotplug hit that check. This patch makes
early_pfn_to_nid introduces a lock to make it safe to use during
hotplug.
Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: Alex Ng <alexng@microsoft.com> Tested-by: Alex Ng <alexng@microsoft.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Nicolai Stange <nicstange@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Marcus Gelderie [Thu, 6 Aug 2015 22:46:10 +0000 (15:46 -0700)]
ipc: modify message queue accounting to not take kernel data structures into account
A while back, the message queue implementation in the kernel was
improved to use btrees to speed up retrieval of messages, in commit d6629859b36d ("ipc/mqueue: improve performance of send/recv").
That patch introducing the improved kernel handling of message queues
(using btrees) has, as a by-product, changed the meaning of the QSIZE
field in the pseudo-file created for the queue. Before, this field
reflected the size of the user-data in the queue. Since, it also takes
kernel data structures into account. For example, if 13 bytes of user
data are in the queue, on my machine the file reports a size of 61
bytes.
There was some discussion on this topic before (for example
https://lkml.org/lkml/2014/10/1/115). Commenting on a th lkml, Michael
Kerrisk gave the following background
(https://lkml.org/lkml/2015/6/16/74):
The pseudofiles in the mqueue filesystem (usually mounted at
/dev/mqueue) expose fields with metadata describing a message
queue. One of these fields, QSIZE, as originally implemented,
showed the total number of bytes of user data in all messages in
the message queue, and this feature was documented from the
beginning in the mq_overview(7) page. In 3.5, some other (useful)
work happened to break the user-space API in a couple of places,
including the value exposed via QSIZE, which now includes a measure
of kernel overhead bytes for the queue, a figure that renders QSIZE
useless for its original purpose, since there's no way to deduce
the number of overhead bytes consumed by the implementation.
(The other user-space breakage was subsequently fixed.)
This patch removes the accounting of kernel data structures in the
queue. Reporting the size of these data-structures in the QSIZE field
was a breaking change (see Michael's comment above). Without the QSIZE
field reporting the total size of user-data in the queue, there is no
way to deduce this number.
It should be noted that the resource limit RLIMIT_MSGQUEUE is counted
against the worst-case size of the queue (in both the old and the new
implementation). Therefore, the kernel overhead accounting in QSIZE is
not necessary to help the user understand the limitations RLIMIT imposes
on the processes.
Signed-off-by: Marcus Gelderie <redmnic@gmail.com> Acked-by: Doug Ledford <dledford@redhat.com> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Davidlohr Bueso <dbueso@suse.de> Cc: David Howells <dhowells@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: John Duffy <jb_duffy@btinternet.com> Cc: Arto Bendiken <arto@bendiken.net> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 5 Aug 2015 15:50:38 +0000 (18:50 +0300)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Just two very small & simple patches"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: MTRR: Use default type for non-MTRR-covered gfn before WARN_ON
KVM: s390: Fix hang VCPU hang/loop regression
Alex Williamson [Tue, 4 Aug 2015 16:58:26 +0000 (10:58 -0600)]
KVM: MTRR: Use default type for non-MTRR-covered gfn before WARN_ON
The patch was munged on commit to re-order these tests resulting in
excessive warnings when trying to do device assignment. Return to
original ordering: https://lkml.org/lkml/2015/7/15/769
Fixes: 3e5d2fdceda1 ("KVM: MTRR: simplify kvm_mtrr_get_guest_memory_type") Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Wed, 5 Aug 2015 09:02:42 +0000 (11:02 +0200)]
Merge tag 'md/4.2-rc5-fixes' of git://neil.brown.name/md
Pull md fixes from Neil Brown:
"Three more fixes for md in 4.2
Mostly corner-case stuff.
One of these patches is for a CVE: CVE-2015-5697
I'm not convinced it is serious (data leak from CAP_SYS_ADMIN ioctl)
but as people seem to want to back-port it, I've included a minimal
version here. The remainder of that patch from Benjamin is
code-cleanup and will arrive in the 4.3 merge window"
* tag 'md/4.2-rc5-fixes' of git://neil.brown.name/md:
md/raid5: don't let shrink_slab shrink too far.
md: use kzalloc() when bitmap is disabled
md/raid1: extend spinlock to protect raid1_end_read_request against inconsistencies
Linus Torvalds [Wed, 5 Aug 2015 08:59:59 +0000 (10:59 +0200)]
Merge branch 'for-4.2' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields.
* 'for-4.2' of git://linux-nfs.org/~bfields/linux:
nfsd: do nfs4_check_fh in nfs4_check_file instead of nfs4_check_olstateid
nfsd: Fix a file leak on nfsd4_layout_setlease failure
nfsd: Drop BUG_ON and ignore SECLABEL on absent filesystem
Dave Chinner has properly pointed out that this is a deadlock in the
reclaim code because ext4 doesn't submit pages which are marked by
PG_writeback right away.
The heuristic was introduced by commit e62e384e9da8 ("memcg: prevent OOM
with too many dirty pages") and it was applied only when may_enter_fs
was specified. The code has been changed by c3b94f44fcb0 ("memcg:
further prevent OOM with too many dirty pages") which has removed the
__GFP_FS restriction with a reasoning that we do not get into the fs
code. But this is not sufficient apparently because the fs doesn't
necessarily submit pages marked PG_writeback for IO right away.
ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily
submit the bio. Instead it tries to map more pages into the bio and
mpage_map_one_extent might trigger memcg charge which might end up
waiting on a page which is marked PG_writeback but hasn't been submitted
yet so we would end up waiting for something that never finishes.
Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2)
before we go to wait on the writeback. The page fault path, which is
the only path that triggers memcg oom killer since 3.12, shouldn't
require GFP_NOFS and so we shouldn't reintroduce the premature OOM
killer issue which was originally addressed by the heuristic.
As per David Chinner the xfs is doing similar thing since 2.6.15 already
so ext4 is not the only affected filesystem. Moreover he notes:
: For example: IO completion might require unwritten extent conversion
: which executes filesystem transactions and GFP_NOFS allocations. The
: writeback flag on the pages can not be cleared until unwritten
: extent conversion completes. Hence memory reclaim cannot wait on
: page writeback to complete in GFP_NOFS context because it is not
: safe to do so, memcg reclaim or otherwise.
Cc: stable@vger.kernel.org # 3.9+
[tytso@mit.edu: corrected the control flow] Fixes: c3b94f44fcb0 ("memcg: further prevent OOM with too many dirty pages") Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 4 Aug 2015 15:51:06 +0000 (08:51 -0700)]
Merge tag 'topic/mst-fixes-2015-08-04' of git://anongit.freedesktop.org/drm-intel
Pull drm mst fixes from Daniel Vetter:
"Special pull request for mst fixes since most of the patches touch
code outside of i915 proper. DRM parts have also been reviewed by
Thierry (nvidia) since Dave's enjoying vacations"
* tag 'topic/mst-fixes-2015-08-04' of git://anongit.freedesktop.org/drm-intel:
drm/atomic-helpers: Make encoder picking more robust
drm/dp-mst: Remove debug WARN_ON
drm/i915: Fixup dp mst encoder selection
drm/atomic-helper: Add an atomice best_encoder callback
Linus Torvalds [Tue, 4 Aug 2015 15:49:08 +0000 (08:49 -0700)]
Merge tag 'for-linus-4.2-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- don't lose interrupts when offlining CPUs
- fix gntdev oops during unmap
- drop the balloon lock occasionally to allow domain create/destroy
* tag 'for-linus-4.2-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events/fifo: Handle linked events when closing a port
xen: release lock occasionally during ballooning
xen/gntdevt: Fix race condition in gntdev_release()
Ross Lagerwall [Fri, 31 Jul 2015 13:30:42 +0000 (14:30 +0100)]
xen/events/fifo: Handle linked events when closing a port
An event channel bound to a CPU that was offlined may still be linked
on that CPU's queue. If this event channel is closed and reused,
subsequent events will be lost because the event channel is never
unlinked and thus cannot be linked onto the correct queue.
When a channel is closed and the event is still linked into a queue,
ensure that it is unlinked before completing.
If the CPU to which the event channel bound is online, spin until the
event is handled by that CPU. If that CPU is offline, it can't handle
the event, so clear the event queue during the close, dropping the
events.
This fixes the missing interrupts (and subsequent disk stalls etc.)
when offlining a CPU.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Linus Torvalds [Tue, 4 Aug 2015 13:57:32 +0000 (06:57 -0700)]
Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fixes from Michal Marek:
"Two fixes for kbuild:
- The new ARCH_{CPP,A,C}FLAGS variables are reset before including
the arch Makefile
- Fix calling make modules_install twice when module compression is
enabled"
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
Makefile: Force gzip and xz on module install
kbuild: Do not pick up ARCH_{CPP,A,C}FLAGS from the environment
Daniel Vetter [Mon, 3 Aug 2015 15:24:11 +0000 (17:24 +0200)]
drm/atomic-helpers: Make encoder picking more robust
We've had a few issues with atomic where subtle bugs in the encoder
picking logic lead to accidental self-stealing of the encoder,
resulting in a NULL connector_state->crtc in update_connector_routing
and subsequent.
Linus applied some duct-tape for an mst regression in
i915: temporary fix for DP MST docking station NULL pointer dereference
But that was incomplete (the code will still oops when debuggin is
enabled) and mangled the state even further. So instead WARN and bail
out as the more future-proof option.
Cc: Theodore Ts'o <tytso@mit.edu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Mon, 3 Aug 2015 15:24:10 +0000 (17:24 +0200)]
drm/dp-mst: Remove debug WARN_ON
Apparently been in there since forever and fairly easy to hit when
hotplugging really fast. I can do that since my mst hub has a manual
button to flick the hpd line for reprobing. The resulting WARNING spam
isn't pretty.
Cc: Dave Airlie <airlied@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Mon, 3 Aug 2015 15:24:09 +0000 (17:24 +0200)]
drm/i915: Fixup dp mst encoder selection
In
commit 8c7b5ccb729870e606321b3703e2c2e698c49a95
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:13:19 2015 +0300
drm/i915: Use atomic helpers for computing changed flags
we've switched over to the atomic version to compute the
crtc->encoder->connector routing from the i915 variant. That one
relies upon the ->best_encoder callback, but the i915-private version
relied upon intel_find_encoder. Which didn't matter except for dp mst,
where the encoder depends upon the selected crtc.
Fix this functional bug by implemented a correct atomic-state based
encoder selector for dp mst.
Note that we can't get rid of the legacy best_encoder callback since
the fbdev emulation uses that still. That means it's incorrect there
still, but that's been the case ever since i915 dp mst support was
merged so not a regression. Best to fix that by converting fbdev over
to atomic too.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Mon, 3 Aug 2015 15:24:08 +0000 (17:24 +0200)]
drm/atomic-helper: Add an atomice best_encoder callback
With legacy helpers all the routing was already set up when calling
best_encoder and so could be inspected. But with atomic it's staged,
hence we need a new atomic compliant callback for drivers which need
to inspect the requested state and can't just decided the best encoder
statically.
This is needed to fix up i915 dp mst where we need to pick the right
encoder depending upon the requested CRTC for the connector.
v2: Don't forget to amend the kerneldoc
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Linus Torvalds [Mon, 3 Aug 2015 21:51:30 +0000 (14:51 -0700)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A refcounting bugfix for the i2c-core, bugfixes for the generic bus
recovery algorithm and for its omap-user, making binary file
attributes for EEPROMs behave POSIX compliant, and a small typo fix
while we are here"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: fix leaked device refcount on of_find_i2c_* error path
i2c: Fix typo in i2c-bfin-twi.c
i2c: omap: fix bus recovery setup
i2c: core: only use set_scl for bus recovery after calling prepare_recovery
misc: eeprom: at24: clean up at24_bin_write()
i2c: slave eeprom: clean up sysfs bin attribute read()/write()
Linus Torvalds [Mon, 3 Aug 2015 18:09:07 +0000 (11:09 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph fixes from Sage Weil:
"There are two critical regression fixes for CephFS from Zheng, and an
RBD completion fix for layered images from Ilya"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: fix copyup completion race
ceph: always re-send cap flushes when MDS recovers
ceph: fix ceph_encode_locks_to_buffer()
NeilBrown [Mon, 3 Aug 2015 07:09:57 +0000 (17:09 +1000)]
md/raid5: don't let shrink_slab shrink too far.
I have a report of drop_one_stripe() called from
raid5_cache_scan() apparently finding ->max_nr_stripes == 0.
This should not be allowed.
So add a test to keep max_nr_stripes above min_nr_stripes.
Also use a 'mask' rather than a 'mod' in drop_one_stripe
to ensure 'hash' is valid even if max_nr_stripes does reach zero.
Fixes: edbe83ab4c27 ("md/raid5: allow the stripe_cache to grow and shrink.") Cc: stable@vger.kernel.org (4.1 - please release with 2d5b569b665) Reported-by: Tomas Papan <tomas.papan@gmail.com> Signed-off-by: NeilBrown <neilb@suse.com>
But if bitmap is disabled only the first byte of "file" is initialized
with zero, so it's possible to read some bytes (up to 4095) of kernel
space memory from user space. This is an information leak.
5775 /* bitmap disabled, zero the first byte and copy out */
5776 if (!mddev->bitmap_info.file)
5777 file->pathname[0] = '\0';
Signed-off-by: Benjamin Randazzo <benjamin@randazzo.fr> Signed-off-by: NeilBrown <neilb@suse.com>
md/raid1: extend spinlock to protect raid1_end_read_request against inconsistencies
raid1_end_read_request() assumes that the In_sync bits are consistent
with the ->degaded count.
raid1_spare_active updates the In_sync bit before the ->degraded count
and so exposes an inconsistency, as does error()
So extend the spinlock in raid1_spare_active() and error() to hide those
inconsistencies.
This should probably be part of
Commit: 34cab6f42003 ("md/raid1: fix test for 'was read error from
last working device'.")
as it addresses the same issue. It fixes the same bug and should go
to -stable for same reasons.
Linus Torvalds [Mon, 3 Aug 2015 01:07:36 +0000 (18:07 -0700)]
Merge tag 'powerpc-4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- TCE table memory calculation fix from Alexey
- Build fix for ans-lcd from Luis
- Unbalanced IRQ warning fix from Alistair
* tag 'powerpc-4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/eeh-powernv: Fix unbalanced IRQ warning
macintosh/ans-lcd: fix build failure after module_init/exit relocation
powerpc/powernv/ioda2: Fix calculation for memory allocated for TCE table
i915: temporary fix for DP MST docking station NULL pointer dereference
Ted Ts'o reports that his Lenovo T540p ThinkPad crashes at boot if
attached to the docking station. This is a regression that he was able
to bisect to commit 8c7b5ccb7298: "drm/i915: Use atomic helpers for
computing changed flags:"
The reason seems to be the new call to drm_atomic_helper_check_modeset()
added to intel_modeset_compute_config(), which in turn calls
update_connector_routing(), and somehow ends up picking a NULL crtc for
the connector state, causing the subsequent drm_crtc_index() to OOPS.
Daniel Vetter says that the fundamental issue seems to be confusion in
the encoder selection, and this isn't the right fix, but while he chases
down the proper fix, this at least avoids the NULL pointer dereference
and makes Ted's docking station work again.
Reported-bisected-and-tested-by: Theodore Ts'o <tytso@mit.edu> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Mani Nikula <jani.nikula@linux.intel.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 2 Aug 2015 16:36:21 +0000 (09:36 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A set of three fixes for the ipr driver and one fairly major one for
memory leaks in the mq path of SCSI"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fix memory leak with scsi-mq
ipr: Fix invalid array indexing for HRRQ
ipr: Fix incorrect trace indexing
ipr: Fix locking for unit attention handling
Linus Torvalds [Sun, 2 Aug 2015 16:12:46 +0000 (09:12 -0700)]
Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Things are calming down nicely here w.r.t. fixes. This batch
includes two week's worth since I missed to send before -rc4.
Nothing particularly scary to point out, smaller fixes here and there.
Shortlog describes it pretty well"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: keystone: fix dt bindings to use post div register for mainpll
ARM: nomadik: disable UART0 on Nomadik boards
ARM: dts: i.MX35: Fix can support.
ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without sysc
ARM: dts: add CPU OPP and regulator supply property for exynos4210
ARM: dts: Update video-phy node with syscon phandle for exynos3250
ARM: DRA7: hwmod: fix gpmc hwmod
Al Viro [Sat, 1 Aug 2015 23:59:28 +0000 (19:59 -0400)]
link_path_walk(): be careful when failing with ENOTDIR
In RCU mode we might end up with dentry evicted just we check
that it's a directory. In such case we should return ECHILD
rather than ENOTDIR, so that pathwalk would be retries in non-RCU
mode.
Breakage had been introduced in commit b18825a - prior to that
we were looking at nd->inode, which had been fetched before
verifying that ->d_seq was still valid. That form of check
would only be satisfied if at some point the pathname prefix
would indeed have resolved to a non-directory. The fix consists
of checking ->d_seq after we'd run into a non-directory dentry,
and failing with ECHILD in case of mismatch.
Note that all branches since 3.12 have that problem...
Linus Torvalds [Sat, 1 Aug 2015 19:47:04 +0000 (12:47 -0700)]
Merge tag 'dmaengine-fix-4.2-rc5' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"We had a regression due to reuse of descriptor so we have reverted
that.
The rest are driver fixes:
- at_hdmac and at_xdmac for residue, trannfer width, and channel config
- pl330 final fix for dma fails and overflow issue
- xgene resouce map fix
- mv_xor big endian op fix"
* tag 'dmaengine-fix-4.2-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
Revert "dmaengine: virt-dma: don't always free descriptor upon completion"
dmaengine: mv_xor: fix big endian operation in register mode
dmaengine: xgene-dma: Fix the resource map to handle overlapping
dmaengine: at_xdmac: fix transfer data width in at_xdmac_prep_slave_sg()
dmaengine: at_hdmac: fix residue computation
dmaengine: at_xdmac: fix bug about channel configuration
dmaengine: pl330: Really fix choppy sound because of wrong residue calculation
dmaengine: pl330: Fix overflow when reporting residue in memcpy
Linus Torvalds [Sat, 1 Aug 2015 16:47:11 +0000 (09:47 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixlets from Thomas Gleixner:
"Just two updates to the maintainers file"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Appoint Jiang and Marc as irqdomain maintainers
MAINTAINERS: Appoint Marc Zyngier as irqchips co-maintainer
Linus Torvalds [Sat, 1 Aug 2015 16:16:33 +0000 (09:16 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fallout from the recent NMI fixes: make x86 LDT handling more robust.
Also some EFI fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ldt: Make modify_ldt synchronous
x86/xen: Probe target addresses in set_aliased_prot() before the hypercall
x86/irq: Use the caller provided polarity setting in mp_check_pin_attr()
efi: Check for NULL efi kernel parameters
x86/efi: Use all 64 bit of efi_memmap in setup_e820()
i2c: fix leaked device refcount on of_find_i2c_* error path
If of_find_i2c_device_by_node() or of_find_i2c_adapter_by_node() find
a device by node, but its type does not match, a reference to that
device is still held. This change fixes the problem.
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
1) Must teardown SR-IOV before unregistering netdev in igb driver, from
Alex Williamson.
2) Fix ipv6 route unreachable crash in IPVS, from Alex Gartrell.
3) Default route selection in ipv4 should take the prefix length, table
ID, and TOS into account, from Julian Anastasov.
4) sch_plug must have a reset method in order to purge all buffered
packets when the qdisc is reset, likewise for sch_choke, from WANG
Cong.
5) Fix deadlock and races in slave_changelink/br_setport in bridging.
From Nikolay Aleksandrov.
6) mlx4 bug fixes (wrong index in port even propagation to VFs,
overzealous BUG_ON assertion, etc.) from Ido Shamay, Jack
Morgenstein, and Or Gerlitz.
7) Turn off klog message about SCTP userspace interface compat that
makes no sense at all, from Daniel Borkmann.
8) Fix unbounded restarts of inet frag eviction process, causing NMI
watchdog soft lockup messages, from Florian Westphal.
9) Suspend/resume fixes for r8152 from Hayes Wang.
10) Fix busy loop when MSG_WAITALL|MSG_PEEK is used in TCP recv, from
Sabrina Dubroca.
11) Fix performance regression when removing a lot of routes from the
ipv4 routing tables, from Alexander Duyck.
12) Fix device leak in AF_PACKET, from Lars Westerhoff.
13) AF_PACKET also has a header length comparison bug due to signedness,
from Alexander Drozdov.
14) Fix bug in EBPF tail call generation on x86, from Daniel Borkmann.
15) Memory leaks, TSO stats, watchdog timeout and other fixes to
thunderx driver from Sunil Goutham and Thanneeru Srinivasulu.
16) act_bpf can leak memory when replacing programs, from Daniel
Borkmann.
17) WOL packet fixes in gianfar driver, from Claudiu Manoil.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (79 commits)
stmmac: fix missing MODULE_LICENSE in stmmac_platform
gianfar: Enable device wakeup when appropriate
gianfar: Fix suspend/resume for wol magic packet
gianfar: Fix warning when CONFIG_PM off
act_pedit: check binding before calling tcf_hash_release()
net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket
net: sched: fix refcount imbalance in actions
r8152: reset device when tx timeout
r8152: add pre_reset and post_reset
qlcnic: Fix corruption while copying
act_bpf: fix memory leaks when replacing bpf programs
net: thunderx: Fix for crash while BGX teardown
net: thunderx: Add PCI driver shutdown routine
net: thunderx: Fix crash when changing rss with mutliple traffic flows
net: thunderx: Set watchdog timeout value
net: thunderx: Wakeup TXQ only if CQE_TX are processed
net: thunderx: Suppress alloc_pages() failure warnings
net: thunderx: Fix TSO packet statistic
net: thunderx: Fix memory leak when changing queue count
net: thunderx: Fix RQ_DROP miscalculation
...
Linus Torvalds [Sat, 1 Aug 2015 00:05:37 +0000 (17:05 -0700)]
Merge branch 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Filipe fixed up a hard to trigger ENOSPC regression from our merge
window pull, and we have a few other smaller fixes"
* 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix quick exhaustion of the system array in the superblock
btrfs: its btrfs_err() instead of btrfs_error()
btrfs: Avoid NULL pointer dereference of free_extent_buffer when read_tree_block() fail
btrfs: Fix lockdep warning of btrfs_run_delayed_iputs()
Linus Torvalds [Sat, 1 Aug 2015 00:00:25 +0000 (17:00 -0700)]
Merge tag 'sound-4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became a relative big update as it includes the collected ASoC
fixes. There are a few fixes in ASoC core side, mostly for DAPM and
the new topology API. The rest are various ASoC driver-specific
fixes, as well as the usual HD-audio and USB-audio quirks"
* tag 'sound-4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
ALSA: hda - Fix MacBook Pro 5,2 quirk
ALSA: hda - Fix race between PM ops and HDA init/probe
ALSA: usb-audio: add dB range mapping for some devices
ALSA: hda - Apply a fixup to Dell Vostro 5480
ALSA: hda - Add pin quirk for the headset mic jack detection on Dell laptop
ALSA: hda - Apply fixup for another Toshiba Satellite S50D
ALSA: fireworks: add support for AudioFire2 quirk
ALSA: hda - Fix the headset mic that will not work on Dell desktop machine
ALSA: hda - fix cs4210_spdif_automute()
ASoC: pcm1681: Fix setting de-emphasis sampling rate selection
ASoC: ssm4567: Keep TDM_BCLKS in ssm4567_set_dai_fmt
ASoC: sgtl5000: Fix up define for SGTL5000_SMALL_POP
ASoC: dapm: Don't add prefix to widget stream name
ASoC: rt5645: Check if codec is initialized in workqueue handler
ASoC: Intel: Get correct usage_count value to load firmware
ASoC: topology: Fix to add dapm mixer info
ASoC: zx: spdif: Fix devm_ioremap_resource return value check
ASoC: zx: i2s: Fix devm_ioremap_resource return value check
ASoC: mediatek: Use platform_of_node for machine drivers
ASoC: Free card DAPM context on snd_soc_instantiate_card() error path
...
Joachim Eastwood [Fri, 31 Jul 2015 17:13:22 +0000 (19:13 +0200)]
stmmac: fix missing MODULE_LICENSE in stmmac_platform
Commit 50649ab14982 ("stmmac: drop driver from stmmac platform code")
was a bit overzealous in removing code and dropped the MODULE_*
macro's that are still needed since stmmac_platform can be a module.
Fix this by putting the macro's remvoed in 50649ab14982 back.
This fixes the following errors when used as a module:
stmmac_platform: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
stmmac_platform: Unknown symbol devm_kmalloc (err 0)
stmmac_platform: Unknown symbol stmmac_suspend (err 0)
stmmac_platform: Unknown symbol platform_get_irq_byname (err 0)
stmmac_platform: Unknown symbol stmmac_dvr_remove (err 0)
stmmac_platform: Unknown symbol platform_get_resource (err 0)
stmmac_platform: Unknown symbol of_get_phy_mode (err 0)
stmmac_platform: Unknown symbol of_property_read_u32_array (err 0)
stmmac_platform: Unknown symbol of_alias_get_id (err 0)
stmmac_platform: Unknown symbol stmmac_resume (err 0)
stmmac_platform: Unknown symbol stmmac_dvr_probe (err 0)
Fixes: 50649ab14982 ("stmmac: drop driver from stmmac platform code") Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 31 Jul 2015 22:41:50 +0000 (15:41 -0700)]
Merge branch 'gianfar-wol-fixes'
Claudiu Manoil says:
====================
gianfar: wol magic packet fixes
These changes were already validated as part of FSL SDK.
Patch 2 fixes occasional wake-on magic packet failures during
traffic, probably due to incorrect traffic stop/ device halt
sequence and incorrect usage of txlock.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The wol_en flag is 0 by default anyway, and we have the
following inconsistency: a MAGIC packet wol capable eth
interface is registered as a wake-up source but unable
to wake-up the system as wol_en is 0 (wake-on flag set to 'd').
Calling set_wakeup_enable() at netdev open is just redundant
because wol_en is 0 by default.
Let only ethtool call set_wakeup_enable() for now.
The bflock is obviously obsoleted, its utility has been corroded
over time. The bitfield flags used today in gianfar are accessed
only on the init/ config path, with no real possibility of
concurrency - nothing that would justify smth. like bflock.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
If we disable NAPI in the first place we can mask the device's
interrupts (and halt it) without fearing that imask may be
concurrently accessed from interrupt context, so there's
no need to do local_irq_save() around gfar_halt_nodisable().
lock_rx_qs()/unlock_tx_qs() are just obsoleted and potentially
buggy routines. The txlock is currently used in the driver only
to manage TX congestion, it has nothing to do with halting the
device. With these changes, the TX processing is stopped before
gfar_halt().
Compact gfar_halt() is used instead of gfar_halt_nodisable(),
as it disables Rx/TX DMA h/w blocks and the Rx/TX h/w queues.
gfar_start() re-enables all these blocks on resume. Enabling
the magic-packet mode remains the same, note that the RX block
is re-enabled just before entering sleep mode.
Add IRQF_NO_SUSPEND flag for the error interrupt line, to signal
that the interrupt line must remain active during sleep in order
to wake the system by magic packet (MAG) reception interrupt.
(On some systems the MAG interrupt did trigger w/o this flag
as well, but on others it didn't.)
Without these fixes, when suspended during fair Tx traffic the
interface occasionally failed to be woken up by magic packet.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
CC drivers/net/ethernet/freescale/gianfar.o
drivers/net/ethernet/freescale/gianfar.c:568:13: warning: 'lock_tx_qs'
defined but not used [-Wunused-function]
static void lock_tx_qs(struct gfar_private *priv)
^
drivers/net/ethernet/freescale/gianfar.c:576:13: warning: 'unlock_tx_qs'
defined but not used [-Wunused-function]
static void unlock_tx_qs(struct gfar_private *priv)
^
Reported-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Fri, 31 Jul 2015 00:12:21 +0000 (17:12 -0700)]
act_pedit: check binding before calling tcf_hash_release()
When we share an action within a filter, the bind refcnt
should increase, therefore we should not call tcf_hash_release().
Fixes: 1a29321ed045 ("net_sched: act: Dont increment refcnt on replace") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Layton [Thu, 30 Jul 2015 10:57:46 +0000 (06:57 -0400)]
nfsd: do nfs4_check_fh in nfs4_check_file instead of nfs4_check_olstateid
Currently, preprocess_stateid_op calls nfs4_check_olstateid which
verifies that the open stateid corresponds to the current filehandle in the
call by calling nfs4_check_fh.
If the stateid is a NFS4_DELEG_STID however, then no such check is done.
This could cause incorrect enforcement of permissions, because the
nfsd_permission() call in nfs4_check_file uses current the current
filehandle, but any subsequent IO operation will use the file descriptor
in the stateid.
Move the call to nfs4_check_fh into nfs4_check_file instead so that it
can be done for all stateid types.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Cc: stable@vger.kernel.org
[bfields: moved fh check to avoid NULL deref in special stateid case] Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Murali Karicheri [Fri, 29 May 2015 16:04:13 +0000 (12:04 -0400)]
ARM: dts: keystone: fix dt bindings to use post div register for mainpll
All of the keystone devices have a separate register to hold post
divider value for main pll clock. Currently the fixed-postdiv
value used for k2hk/l/e SoCs works by sheer luck as u-boot happens to
use a value of 2 for this. Now that we have fixed this in the pll
clock driver change the dt bindings for the same.
Merge tag 'iommu-fixes-v4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"These fixes are all for the AMD IOMMU driver:
- A regression with HSA caused by the conversion of the driver to
default domains. The fixes make sure that an HSA device can still
be attached to an IOMMUv2 domain and that these domains also allow
non-IOMMUv2 capable devices.
- Fix iommu=pt mode which did not work because the dma_ops where set
to nommu_ops, which breaks devices that can only do 32bit DMA.
- Fix an issue with non-PCI devices not working, because there are no
dma_ops for them. This issue was discovered recently as new AMD
x86 platforms have non-PCI devices too"
* tag 'iommu-fixes-v4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Allow non-ATS devices in IOMMUv2 domains
iommu/amd: Set global dma_ops if swiotlb is disabled
iommu/amd: Use swiotlb in passthrough mode
iommu/amd: Allow non-IOMMUv2 devices in IOMMUv2 domains
iommu/amd: Use iommu core for passthrough mode
iommu/amd: Use iommu_attach_group()
Merge tag 'drm-intel-fixes-2015-07-31' of git://anongit.freedesktop.org/drm-intel
Pull drm intel fixes from Daniel Vetter:
"I delayed my -fixes pull a bit hoping that I could include a fix for
the dp mst stuff but looks a bit more nasty than that. So just 3
other regression fixes, one 4.2 other two cc: stable"
* tag 'drm-intel-fixes-2015-07-31' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Declare the swizzling unknown for L-shaped configurations
drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt
drm/i915: Replace WARN inside I915_READ64_2x32 with retry loop
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This has a bunch of nouveau fixes, as Ben has been hibernating and has
lots of small fixes for lots of bugs across nouveau.
Radeon has one major fix for hdmi/dp audio regression that is larger
than Alex would like, but seems to fix up a fair few bugs, along with
some misc fixes.
And a few msm fixes, one of which is also a bit large.
But nothing in here seems insane or crazy for this stage, just more
than I'd like"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (33 commits)
drm/msm/mdp5: release SMB (shared memory blocks) in various cases
drm/msm: change to uninterruptible wait in atomic commit
drm/msm: mdp4: Fix drm_framebuffer dereference crash
drm/msm: fix msm_gem_prime_get_sg_table()
drm/amdgpu: add new parameter to seperate map and unmap
drm/amdgpu: hdp_flush is not needed for inside IB
drm/amdgpu: different emit_ib for gfx and compute
drm/amdgpu: information leak in amdgpu_info_ioctl()
drm/amdgpu: clean up init sequence for failures
drm/radeon/combios: add some validation of lvds values
drm/radeon: rework audio modeset to handle non-audio hdmi features
drm/radeon: rework audio detect (v4)
drm/amdgpu: Drop drm/ prefix for including drm.h in amdgpu_drm.h
drm/radeon: Drop drm/ prefix for including drm.h in radeon_drm.h
drm/nouveau/nouveau/ttm: fix tiled system memory with Maxwell
drm/nouveau/kms/nv50-: guard against enabling cursor on disabled heads
drm/nouveau/fbcon/g80: reduce PUSH_SPACE alloc, fire ring on accel init
drm/nouveau/fbcon/gf100-: reduce RING_SPACE allocation
drm/nouveau/fbcon/nv11-: correctly account for ring space usage
drm/nouveau/bios: add proper support for opcode 0x59
...
Jun Nie [Fri, 10 Jul 2015 12:02:49 +0000 (20:02 +0800)]
Revert "dmaengine: virt-dma: don't always free descriptor upon completion"
This reverts commit b9855f03d560d351e95301b9de0bc3cad3b31fe9.
The patch break existing DMA usage case. For example, audio SOC
dmaengine never release channel and cause virt-dma to cache too
much memory in descriptor to exhaust system memory.
dmaengine: mv_xor: fix big endian operation in register mode
Commit 6f166312c6ea2 ("dmaengine: mv_xor: add support for a38x command
in descriptor mode") introduced the support for a feature that
appeared in Armada 38x: specifying the operation to be performed in a
per-descriptor basis rather than globally per channel.
However, when doing so, it changed the function mv_chan_set_mode() to
use:
if (IS_ENABLED(__BIG_ENDIAN))
instead of:
#if defined(__BIG_ENDIAN)
While IS_ENABLED() is perfectly fine for CONFIG_* symbols, it is not
for other symbols such as __BIG_ENDIAN that is provided directly by
the compiler. Consequently, the commit broke support for big-endian,
as the XOR_DESCRIPTOR_SWAP flag was not set in the XOR channel
configuration register.
The primarily visible effect was some nasty warnings and failures
appearing during the self-test of the XOR unit:
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Fixes: 6f166312c6ea2 ("dmaengine: mv_xor: add support for a38x command in descriptor mode") Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dmaengine: xgene-dma: Fix the resource map to handle overlapping
There is an overlap in dma ring cmd csr region due to sharing of ethernet
ring cmd csr region. This patch fix the resource overlapping by mapping
the entire dma ring cmd csr region.
Cyrille Pitchen [Tue, 30 Jun 2015 12:36:57 +0000 (14:36 +0200)]
dmaengine: at_xdmac: fix transfer data width in at_xdmac_prep_slave_sg()
This patch adds the missing update of the transfer data width in
at_xdmac_prep_slave_sg().
Indeed, for each item in the scatter-gather list, we check whether the
transfer length is aligned with the data width provided by
dmaengine_slave_config(). If so, we directly use this data width for the
current part of the transfer we are preparing. Otherwise, the data width
is reduced to 8 bits (1 byte). Of course, the actual number of register
accesses must also be updated to match the new data width.
So one chunk was missing in the original patch (see Fixes tag below): the
number of register accesses was correctly set to (len >> fixed_dwidth) in
mbr_ubc but the real data width was not updated in mbr_cfg. Since mbr_cfg
may change for each part of the scatter-gather transfer this also explains
why the original patch used the Descriptor View 2 instead of the
Descriptor View 1.
Let's take the example of a DMA transfer to write 8bit data into an Atmel
USART with FIFOs. When FIFOs are enabled in the USART, its Transmit
Holding Register (THR) works in multidata mode, that is to say that up to
4 8bit data can be written into the THR in a single 32bit access and it is
still possible to write only one data with a 8bit access. To take
advantage of this new feature, the DMA driver was modified to allow
multiple dwidths when doing slave transfers.
For instance, when the total length is 22 bytes, the USART driver splits
the transfer into 2 parts:
First part: 20 bytes transferred through 5 32bit writes into THR
Second part: 2 bytes transferred though 2 8bit writes into THR
For the second part, the data width was first set to 4_BYTES by the USART
driver thanks to dmaengine_slave_config() then at_xdmac_prep_slave_sg()
reduces this data width to 1_BYTE because the 2 byte length is not aligned
with the original 4_BYTES data width. Since the data width is modified,
the actual number of writes into THR must be set accordingly.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Fixes: 6d3a7d9e3ada ("dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers") Cc: stable@vger.kernel.org #4.0 and later Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cyrille Pitchen [Thu, 18 Jun 2015 11:25:41 +0000 (13:25 +0200)]
dmaengine: at_hdmac: fix residue computation
As claimed by the programmer datasheet and confirmed by the IP designer,
the Block Transfer Size (BTSIZE) bitfield of the Channel x Control A
Register (CTRLAx) always refers to a number of Source Width (SRC_WIDTH)
transfers.
Both the SRC_WIDTH and BTSIZE bitfields can be extacted from the CTRLAx
register to compute the DMA residue. So the 'tx_width' field is useless
and can be removed from the struct at_desc.
Before this patch, atc_prep_slave_sg() was not consistent: BTSIZE was
correctly initialized according to the SRC_WIDTH but 'tx_width' was always
set to reg_width, which was incorrect for MEM_TO_DEV transfers. It led to
bad DMA residue when 'tx_width' != SRC_WIDTH.
Also the 'tx_width' field was mostly set only in the first and last
descriptors. Depending on the kind of DMA transfer, this field remained
uninitialized for intermediate descriptors. The accurate DMA residue was
computed only when the currently processed descriptor was the first or the
last of the chain. This algorithm was a little bit odd. An accurate DMA
residue can always be computed using the SRC_WIDTH and BTSIZE bitfields
in the CTRLAx register.
Finally, the test to check whether the currently processed descriptor is
the last of the chain was wrong: for cyclic transfer, last_desc->lli.dscr
is NOT equal to zero, since set_desc_eol() is never called, but logically
equal to first_desc->txd.phys. This bug has a side effect on the
drivers/tty/serial/atmel_serial.c driver, which uses cyclic DMA transfer
to receive data. Since the DMA residue was wrong each time the DMA
transfer reaches the second (and last) period of the transfer, no more
data were received by the USART driver till the cyclic DMA transfer loops
back to the first period.
dmaengine: at_xdmac: fix bug about channel configuration
When using descriptor view 2 or higher, we don't write the configuration
into AT_XDMAC_CC register because this configuration will be fetch from
the descriptor. Unfortunately, the PROT bit is not updated with this
method, we have to do it manually before enabling the channel.
iommu/amd: Allow non-ATS devices in IOMMUv2 domains
With the grouping of multi-function devices a non-ATS
capable device might also end up in the same domain as an
IOMMUv2 capable device.
So handle this situation gracefully and don't consider it a
bug anymore.
Jan Luebbe [Wed, 8 Jul 2015 14:35:27 +0000 (16:35 +0200)]
i2c: omap: fix bus recovery setup
At least on the AM335x, enabling OMAP_I2C_SYSTEST_ST_EN is not enough to
allow direct access to the SCL and SDA pins. In addition to ST_EN, we
need to set the TMODE to 0b11 (Loop back & SDA/SCL IO mode select).
Also, as the reset values of SCL_O and SDA_O are 0 (which means "drive
low level"), we need to set them to 1 (which means "high-impedance") to
avoid unwanted changes on the pins.
As a precaution, reset all these bits to their default values after
recovery is complete.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Jan Luebbe [Wed, 8 Jul 2015 14:35:06 +0000 (16:35 +0200)]
i2c: core: only use set_scl for bus recovery after calling prepare_recovery
Using set_scl may be ineffective before calling the driver specific
prepare_recovery callback, which might change into a test mode. So
instead of setting SCL in i2c_generic_scl_recovery, move it to
i2c_generic_recovery (after the optional prepare_recovery).
Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Acked-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
For write/discard obj_requests that involved a copyup method call, the
opcode of the first op is CEPH_OSD_OP_CALL and the ->callback is
rbd_img_obj_copyup_callback(). The latter frees copyup pages, sets
->xferred and delegates to rbd_img_obj_callback(), the "normal" image
object callback, for reporting to block layer and putting refs.
rbd_osd_req_callback() however treats CEPH_OSD_OP_CALL as a trivial op,
which means obj_request is marked done in rbd_osd_trivial_callback(),
*before* ->callback is invoked and rbd_img_obj_copyup_callback() has
a chance to run. Marking obj_request done essentially means giving
rbd_img_obj_callback() a license to end it at any moment, so if another
obj_request from the same img_request is being completed concurrently,
rbd_img_obj_end_request() may very well be called on such prematurally
marked done request:
Calling rbd_img_obj_end_request() on such a request leads to trouble,
in particular because its ->xfferred is 0. We report 0 to the block
layer with blk_update_request(), get back 1 for "this request has more
data in flight" and then trip on
with rhs (which == ...) being 1 because rbd_img_obj_end_request() has
been called for both requests and lhs (more) being 1 because we haven't
got a chance to set ->xfferred in rbd_img_obj_copyup_callback() yet.
To fix this, leverage that rbd wants to call class methods in only two
cases: one is a generic method call wrapper (obj_request is standalone)
and the other is a copyup (obj_request is part of an img_request). So
make a dedicated handler for CEPH_OSD_OP_CALL and directly invoke
rbd_img_obj_copyup_callback() from it if obj_request is part of an
img_request, similar to how CEPH_OSD_OP_READ handler invokes
rbd_img_obj_request_read_callback().
Since rbd_img_obj_copyup_callback() is now being called from the OSD
request callback (only), it is renamed to rbd_osd_copyup_callback().
Cc: Alex Elder <elder@linaro.org> Cc: stable@vger.kernel.org # 3.10+, needs backporting for < 3.18 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
ceph: always re-send cap flushes when MDS recovers
commit e548e9b93d3e565e42b938a99804114565be1f81 makes the kclient
only re-send cap flush once during MDS failover. If the kclient sends
a cap flush after MDS enters reconnect stage but before MDS recovers.
The kclient will skip re-sending the same cap flush when MDS recovers.
This causes problem for newly created inode. The MDS handles cap
flushes before replaying unsafe requests, so it's possible that MDS
find corresponding inode is missing when handling cap flush. The fix
is reverting to old behaviour: always re-send when MDS recovers
Andy Lutomirski [Thu, 30 Jul 2015 21:31:32 +0000 (14:31 -0700)]
x86/ldt: Make modify_ldt synchronous
modify_ldt() has questionable locking and does not synchronize
threads. Improve it: redesign the locking and synchronize all
threads' LDTs using an IPI on all modifications.
This will dramatically slow down modify_ldt in multithreaded
programs, but there shouldn't be any multithreaded programs that
care about modify_ldt's performance in the first place.
This fixes some fallout from the CVE-2015-5157 fixes.
Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: security@kernel.org <security@kernel.org> Cc: <stable@vger.kernel.org> Cc: xen-devel <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/4c6978476782160600471bd865b318db34c7b628.1438291540.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Thu, 30 Jul 2015 21:31:31 +0000 (14:31 -0700)]
x86/xen: Probe target addresses in set_aliased_prot() before the hypercall
The update_va_mapping hypercall can fail if the VA isn't present
in the guest's page tables. Under certain loads, this can
result in an OOPS when the target address is in unpopulated vmap
space.
While we're at it, add comments to help explain what's going on.
This isn't a great long-term fix. This code should probably be
changed to use something like set_memory_ro.
Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <dvrabel@cantab.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: security@kernel.org <security@kernel.org> Cc: <stable@vger.kernel.org> Cc: xen-devel <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/0b0e55b995cda11e7829f140b833ef932fcabe3a.1438291540.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent
Pull EFI fixes from Matt Fleming:
* Fix an EFI boot issue preventing a Parallels virtual machine from
booting because the upper 32-bits of the EFI memmap pointer were
being discarded in setup_e820(). (Dmitry Skorodumov)
* Validate that the "efi" kernel parameter gets used with an argument,
otherwise we will oops. (Ricardo Neri)
Merge tag 'xfs-for-linus-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs fixes from Dave Chinner:
"There are a couple of recently found, long standing remote attribute
corruption fixes caused by log recovery getting confused after a
crash, and the new DAX code in XFS (merged in 4.2-rc1) needs to
actually use the DAX fault path on read faults.
Summary:
- remote attribute log recovery corruption fixes
- DAX page faults need to use direct mappings, not a page cache
mapping"
* tag 'xfs-for-linus-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: remote attributes need to be considered data
xfs: remote attribute headers contain an invalid LSN
xfs: call dax_fault on read page faults for DAX
net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket
The newsk returned by sk_clone_lock should hold a get_net()
reference if, and only if, the parent is not a kernel socket
(making this similar to sk_alloc()).
E.g,. for the SYN_RECV path, tcp_v4_syn_recv_sock->..inet_csk_clone_lock
sets up the syn_recv newsk from sk_clone_lock. When the parent (listen)
socket is a kernel socket (defined in sk_alloc() as having
sk_net_refcnt == 0), then the newsk should also have a 0 sk_net_refcnt
and should not hold a get_net() reference.
Fixes: 26abe14379f8 ("net: Modify sk_alloc to not reference count the
netns of kernel sockets.") Acked-by: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 29 Jul 2015 21:35:25 +0000 (23:35 +0200)]
net: sched: fix refcount imbalance in actions
Since commit 55334a5db5cd ("net_sched: act: refuse to remove bound action
outside"), we end up with a wrong reference count for a tc action.
Test case 1:
FOO="1,6 0 0 4294967295,"
BAR="1,6 0 0 4294967294,"
tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 \
action bpf bytecode "$FOO"
tc actions show action bpf
action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe
index 1 ref 1 bind 1
tc actions replace action bpf bytecode "$BAR" index 1
tc actions show action bpf
action order 0: bpf bytecode '1,6 0 0 4294967294' default-action pipe
index 1 ref 2 bind 1
tc actions replace action bpf bytecode "$FOO" index 1
tc actions show action bpf
action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe
index 1 ref 3 bind 1
Test case 2:
FOO="1,6 0 0 4294967295,"
tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 action ok
tc actions show action gact
action order 0: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
tc actions add action drop index 1
RTNETLINK answers: File exists [...]
tc actions show action gact
action order 0: gact action pass
random type none pass val 0
index 1 ref 2 bind 1
tc actions add action drop index 1
RTNETLINK answers: File exists [...]
tc actions show action gact
action order 0: gact action pass
random type none pass val 0
index 1 ref 3 bind 1
What happens is that in tcf_hash_check(), we check tcf_common for a given
index and increase tcfc_refcnt and conditionally tcfc_bindcnt when we've
found an existing action. Now there are the following cases:
1) We do a late binding of an action. In that case, we leave the
tcfc_refcnt/tcfc_bindcnt increased and are done with the ->init()
handler. This is correctly handeled.
2) We replace the given action, or we try to add one without replacing
and find out that the action at a specific index already exists
(thus, we go out with error in that case).
In case of 2), we have to undo the reference count increase from
tcf_hash_check() in the tcf_hash_check() function. Currently, we fail to
do so because of the 'tcfc_bindcnt > 0' check which bails out early with
an -EPERM error.
Now, while commit 55334a5db5cd prevents 'tc actions del action ...' on an
already classifier-bound action to drop the reference count (which could
then become negative, wrap around etc), this restriction only accounts for
invocations outside a specific action's ->init() handler.
One possible solution would be to add a flag thus we possibly trigger
the -EPERM ony in situations where it is indeed relevant.
After the patch, above test cases have correct reference count again.
Fixes: 55334a5db5cd ("net_sched: act: refuse to remove bound action outside") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 30 Jul 2015 21:03:46 +0000 (14:03 -0700)]
Merge branch 'r8152-fixes'
Hayes Wang says:
====================
r8152: device reset
v3:
For patch #2, remove cancel_delayed_work().
v2:
For patch #1, remove usb_autopm_get_interface(), usb_autopm_put_interface(), and
the checking of intf->condition.
For patch #2, replace the original method with usb_queue_reset_device() to reset
the device.
v1:
Although the driver works normally, we find the device may get all 0xff data when
transmitting packets on certain platforms. It would break the device and no packet
could be transmitted. The reset is necessary to recover the hw for this situation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add rtl8152_pre_reset() and rtl8152_post_reset() which are used when
calling usb_reset_device(). The two functions could reduce the time
of reset when calling usb_reset_device() after probe().
Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
MacBook Pro 5,2 with ALC889 codec had already a fixup entry, but this
seems not working correctly, a fix for pin NID 0x15 is needed in
addition. It's equivalent with the fixup for MacBook Air 1,1, so use
this instead.
Thomas Gleixner [Thu, 30 Jul 2015 10:40:55 +0000 (12:40 +0200)]
MAINTAINERS: Appoint Jiang and Marc as irqdomain maintainers
Ben was pretty surprised that he is still listed as the maintainer and
he has no objections against transferring the duty to those who
rumaged in and revamped that code in the recent past.
Add kernel/irq/msi.c to the affected files as it's part of the shiny
new hierarchical irqdomain machinery.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Grant Likely <grant.likely@linaro.org>
Jiang Liu [Thu, 30 Jul 2015 07:51:32 +0000 (15:51 +0800)]
x86/irq: Use the caller provided polarity setting in mp_check_pin_attr()
Commit d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical
irqdomain interfaces") introduced a regression which causes
malfunction of interrupt lines.
The reason is that the conversion of mp_check_pin_attr() missed to
update the polarity selection of the interrupt pin with the caller
provided setting and instead uses a stale attribute value. That in
turn results in chosing the wrong interrupt flow handler.
Use the caller supplied setting to configure the pin correctly which
also choses the correct interrupt flow handler.
This restores the original behaviour and on the affected
machine/driver (Surface Pro 3, i2c controller) all IOAPIC IRQ
configuration are identical to v4.1.
Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Reported-and-tested-by: Matt Fleming <matt@codeblueprint.co.uk> Reported-and-tested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Chen Yu <yu.c.chen@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1438242695-23531-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"The main change is support for keyboards and touchpads found in 2015
editions of Macbooks"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Revert "Input: zforce - don't overwrite the stack"
Input: bcm5974 - add support for the 2015 Macbook Pro
HID: apple: Add support for the 2015 Macbook Pro
Input: bcm5974 - prepare for a new trackpad generation
Input: synaptics - dump ext10 capabilities as well
Tony Battersby [Thu, 16 Jul 2015 15:40:41 +0000 (11:40 -0400)]
scsi: fix memory leak with scsi-mq
Fix a memory leak with scsi-mq triggered by commands with large data
transfer length.
__sg_alloc_table() sets both table->nents and table->orig_nents to the
same value. When the scatterlist is DMA-mapped, table->nents is
overwritten with the (possibly smaller) size of the DMA-mapped
scatterlist, while table->orig_nents retains the original size of the
allocated scatterlist. scsi_free_sgtable() should therefore check
orig_nents instead of nents, and all code that initializes sdb->table
without calling __sg_alloc_table() should set both nents and orig_nents.
Fixes: d285203cf647 ("scsi: add support for a blk-mq based I/O path.") Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Brian King [Tue, 14 Jul 2015 16:41:33 +0000 (11:41 -0500)]
ipr: Fix invalid array indexing for HRRQ
Fixes another signed / unsigned array indexing bug in the ipr driver.
Currently, when hrrq_index wraps, it becomes a negative number. We
do the modulo, but still have a negative number, so we end up indexing
backwards in the array. Given where the hrrq array is located in memory,
we probably won't actually reference memory we don't own, but nonetheless
ipr is still looking at data within struct ipr_ioa_cfg and interpreting it as
struct ipr_hrr_queue data, so bad things could certainly happen.
Each ipr adapter has anywhere from 1 to 16 HRRQs. By default, we use 2 on new
adapters. Let's take an example:
Assume ioa_cfg->hrrq_index=0x7fffffffe and ioa_cfg->hrrq_num=4:
The atomic_add_return will then return -1. We mod this with 3 and get -2, add
one and get -1 for an array index.
On adapters which support more than a single HRRQ, we dedicate HRRQ to adapter
initialization and error interrupts so that we can optimize the other queues
for fast path I/O. So all normal I/O uses HRRQ 1-15. So we want to spread the
I/O requests across those HRRQs.
With the default module parameter settings, this bug won't hit, only when
someone sets the ipr.number_of_msix parameter to a value larger than 3 is when
bad things start to happen.
Cc: <stable@vger.kernel.org> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Brian King [Tue, 14 Jul 2015 16:41:31 +0000 (11:41 -0500)]
ipr: Fix incorrect trace indexing
When ipr's internal driver trace was changed to an atomic, a signed/unsigned
bug slipped in which results in us indexing backwards in our memory buffer
writing on memory that does not belong to us. This patch fixes this by removing
the modulo and instead just mask off the low bits.
Cc: <stable@vger.kernel.org> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
projects / mirror_ubuntu-eoan-kernel.git / log