Paul Mackerras [Thu, 3 Sep 2020 07:55:40 +0000 (17:55 +1000)]
KVM: PPC: Book3S HV: Set LPCR[HDICE] before writing HDEC
POWER8 and POWER9 machines have a hardware deviation where generation
of a hypervisor decrementer exception is suppressed if the HDICE bit
in the LPCR register is 0 at the time when the HDEC register
decrements from 0 to -1. When entering a guest, KVM first writes the
HDEC register with the time until it wants the CPU to exit the guest,
and then writes the LPCR with the guest value, which includes
HDICE = 1. If HDEC decrements from 0 to -1 during the interval
between those two events, it is possible that we can enter the guest
with HDEC already negative but no HDEC exception pending, meaning that
no HDEC interrupt will occur while the CPU is in the guest, or at
least not until HDEC wraps around. Thus it is possible for the CPU to
keep executing in the guest for a long time; up to about 4 seconds on
POWER8, or about 4.46 years on POWER9 (except that the host kernel
hard lockup detector will fire first).
To fix this, we set the LPCR[HDICE] bit before writing HDEC on guest
entry.
KVM: PPC: Book3S HV: Do not allocate HPT for a nested guest
The current nested KVM code does not support HPT guests. This is
informed/enforced in some ways:
- Hosts < P9 will not be able to enable the nested HV feature;
- The nested hypervisor MMU capabilities will not contain
KVM_CAP_PPC_MMU_HASH_V3;
- QEMU reflects the MMU capabilities in the
'ibm,arch-vec-5-platform-support' device-tree property;
- The nested guest, at 'prom_parse_mmu_model' ignores the
'disable_radix' kernel command line option if HPT is not supported;
- The KVM_PPC_CONFIGURE_V3_MMU ioctl will fail if trying to use HPT.
There is, however, still a way to start a HPT guest by using
max-compat-cpu=power8 at the QEMU machine options. This leads to the
guest being set to use hash after QEMU calls the KVM_PPC_ALLOCATE_HTAB
ioctl.
With the guest set to hash, the nested hypervisor goes through the
entry path that has no knowledge of nesting (kvmppc_run_vcpu) and
crashes when it tries to execute an hypervisor-privileged (mtspr
HDEC) instruction at __kvmppc_vcore_entry:
Greg Kurz [Fri, 11 Sep 2020 10:53:45 +0000 (12:53 +0200)]
KVM: PPC: Don't return -ENOTSUPP to userspace in ioctls
ENOTSUPP is a linux only thingy, the value of which is unknown to
userspace, not to be confused with ENOTSUP which linux maps to
EOPNOTSUPP, as permitted by POSIX [1]:
[EOPNOTSUPP]
Operation not supported on socket. The type of socket (address family
or protocol) does not support the requested operation. A conforming
implementation may assign the same values for [EOPNOTSUPP] and [ENOTSUP].
Return -EOPNOTSUPP instead of -ENOTSUPP for the following ioctls:
- KVM_GET_FPU for Book3s and BookE
- KVM_SET_FPU for Book3s and BookE
- KVM_GET_DIRTY_LOG for BookE
This doesn't affect QEMU which doesn't call the KVM_GET_FPU and
KVM_SET_FPU ioctls on POWER anyway since they are not supported,
and _buggily_ ignores anything but -EPERM for KVM_GET_DIRTY_LOG.
Signed-off-by: Greg Kurz <groug@kaod.org> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Greg Kurz [Mon, 10 Aug 2020 10:08:05 +0000 (12:08 +0200)]
KVM: PPC: Book3S HV: XICS: Replace the 'destroy' method by a 'release' method
Similarly to what was done with XICS-on-XIVE and XIVE native KVM devices
with commit 5422e95103cf ("KVM: PPC: Book3S HV: XIVE: Replace the 'destroy'
method by a 'release' method"), convert the historical XICS KVM device to
implement the 'release' method. This is needed to run nested guests with
an in-kernel IRQ chip. A typical POWER9 guest can select XICS or XIVE
during boot, which requires to be able to destroy and to re-create the
KVM device. Only the historical XICS KVM device is available under pseries
at the current time and it still uses the legacy 'destroy' method.
Switching to 'release' means that vCPUs might still be running when the
device is destroyed. In order to avoid potential use-after-free, the
kvmppc_xics structure is allocated on first usage and kept around until
the VM exits. The same pointer is used each time a KVM XICS device is
being created, but this is okay since we only have one per VM.
Clear the ICP of each vCPU with vcpu->mutex held. This ensures that the
next time the vCPU resumes execution, it won't be going into the XICS
code anymore.
Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Linus Torvalds [Sun, 23 Aug 2020 18:37:23 +0000 (11:37 -0700)]
Merge tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Add perf support for emitting extended registers for power10.
- A fix for CPU hotplug on pseries, where on large/loaded systems we
may not wait long enough for the CPU to be offlined, leading to
crashes.
- Addition of a raw cputable entry for Power10, which is not required
to boot, but is required to make our PMU setup work correctly in
guests.
- Three fixes for the recent changes on 32-bit Book3S to move modules
into their own segment for strict RWX.
- A fix for a recent change in our powernv PCI code that could lead to
crashes.
- A change to our perf interrupt accounting to avoid soft lockups when
using some events, found by syzkaller.
- A change in the way we handle power loss events from the hypervisor
on pseries. We no longer immediately shut down if we're told we're
running on a UPS.
- A few other minor fixes.
Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T
Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz,
Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth,
Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann,
Vaidyanathan Srinivasan, Vasant Hegde.
* tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000
powerpc/pseries: Do not initiate shutdown when system is running on UPS
powerpc/perf: Fix soft lockups due to missed interrupt accounting
powerpc/powernv/pci: Fix possible crash when releasing DMA resources
powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death
powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined
powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32
powerpc/fixmap: Fix the size of the early debug area
powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled
powerpc/kernel: Cleanup machine check function declarations
powerpc: Add POWER10 raw mode cputable entry
powerpc/perf: Add extended regs support for power10 platform
powerpc/perf: Add support for outputting extended regs in perf intr_regs
powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
Linus Torvalds [Sun, 23 Aug 2020 18:21:16 +0000 (11:21 -0700)]
Merge tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for x86 which removes the RDPID usage from the paranoid
entry path and unconditionally uses LSL to retrieve the CPU number.
RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid
expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values
and restores them either when leaving the run loop, on preemption or
when going out to user space. MSR_TSX_AUX is part of that lazy MSR
set, so after writing the guest value and before the lazy restore any
exception using the paranoid entry will read the guest value and use
it as CPU number to retrieve the GSBASE value for the current CPU when
FSGSBASE is enabled. As RDPID is only used in that particular entry
path, there is no reason to burden VMENTER/EXIT with two extra MSR
writes. Remove the RDPID optimization, which is not even backed by
numbers from the paranoid entry path instead"
* tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
Linus Torvalds [Sun, 23 Aug 2020 18:15:14 +0000 (11:15 -0700)]
Merge tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Thomas Gleixner:
"A single update for perf on x86 which has support for the broken down
bandwith counters"
* tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown
Linus Torvalds [Sun, 23 Aug 2020 18:05:47 +0000 (11:05 -0700)]
Merge tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull entry fix from Thomas Gleixner:
"A single bug fix for the common entry code.
The transcription of the x86 version messed up the reload of the
syscall number from pt_regs after ptrace and seccomp which breaks
syscall number rewriting"
* tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
core/entry: Respect syscall number rewrites
Linus Torvalds [Sun, 23 Aug 2020 17:57:19 +0000 (10:57 -0700)]
Merge tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
"A single fix correcting a reversed error severity determination check
which lead to a recoverable error getting marked as fatal, by Tony
Luck"
* tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/{i7core,sb,pnd2,skx}: Fix error event severity
Pull networking fixes from David Miller:
"Nothing earth shattering here, lots of small fixes (f.e. missing RCU
protection, bad ref counting, missing memset(), etc.) all over the
place:
1) Use get_file_rcu() in task_file iterator, from Yonghong Song.
2) There are two ways to set remote source MAC addresses in macvlan
driver, but only one of which validates things properly. Fix this.
From Alvin Šipraga.
3) Missing of_node_put() in gianfar probing, from Sumera
Priyadarsini.
4) Preserve device wanted feature bits across multiple netlink
ethtool requests, from Maxim Mikityanskiy.
5) Fix rcu_sched stall in task and task_file bpf iterators, from
Yonghong Song.
6) Avoid reset after device destroy in ena driver, from Shay
Agroskin.
7) Missing memset() in netlink policy export reallocation path, from
Johannes Berg.
8) Fix info leak in __smc_diag_dump(), from Peilin Ye.
9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark
Tomlinson.
10) Fix number of data stream negotiation in SCTP, from David Laight.
11) Fix double free in connection tracker action module, from Alaa
Hleihel.
12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: nexthop: don't allow empty NHA_GROUP
bpf: Fix two typos in uapi/linux/bpf.h
net: dsa: b53: check for timeout
tipc: call rcu_read_lock() in tipc_aead_encrypt_done()
net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow
net: sctp: Fix negotiation of the number of data streams.
dt-bindings: net: renesas, ether: Improve schema validation
gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY
hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()
hv_netvsc: Remove "unlikely" from netvsc_select_queue
bpf: selftests: global_funcs: Check err_str before strstr
bpf: xdp: Fix XDP mode when no mode flags specified
selftests/bpf: Remove test_align leftovers
tools/resolve_btfids: Fix sections with wrong alignment
net/smc: Prevent kernel-infoleak in __smc_diag_dump()
sfc: fix build warnings on 32-bit
net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified"
libbpf: Fix map index used in error message
net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()
net: atlantic: Use readx_poll_timeout() for large timeout
...
Linus Torvalds [Sun, 23 Aug 2020 00:11:38 +0000 (17:11 -0700)]
Merge branch 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull epoll fixes from Al Viro:
"Fix reference counting and clean up exit paths"
* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_epoll_ctl(): clean the failure exits up a bit
epoll: Keep a reference on files added to the check list
Marc Zyngier [Wed, 19 Aug 2020 16:12:17 +0000 (17:12 +0100)]
epoll: Keep a reference on files added to the check list
When adding a new fd to an epoll, and that this new fd is an
epoll fd itself, we recursively scan the fds attached to it
to detect cycles, and add non-epool files to a "check list"
that gets subsequently parsed.
However, this check list isn't completely safe when deletions
can happen concurrently. To sidestep the issue, make sure that
a struct file placed on the check list sees its f_count increased,
ensuring that a concurrent deletion won't result in the file
disapearing from under our feet.
Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently the nexthop code will use an empty NHA_GROUP attribute, but it
requires at least 1 entry in order to function properly. Otherwise we
end up derefencing null or random pointers all over the place due to not
having any nh_grp_entry members allocated, nexthop code relies on having at
least the first member present. Empty NHA_GROUP doesn't make any sense so
just disallow it.
Also add a WARN_ON for any future users of nexthop_create_group().
CC: David Ahern <dsahern@gmail.com> Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Reported-by: syzbot+a61aa19b0c14c8770bd9@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 22 Aug 2020 17:22:44 +0000 (10:22 -0700)]
Merge tag 'kbuild-fixes-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- move -Wsign-compare warning from W=2 to W=3
- fix the keyword _restrict to __restrict in genksyms
- fix more bugs in qconf
* tag 'kbuild-fixes-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: qconf: replace deprecated QString::sprintf() with QTextStream
kconfig: qconf: remove redundant help in the info view
kconfig: qconf: remove qInfo() to get back Qt4 support
kconfig: qconf: remove unused colNr
kconfig: qconf: fix the popup menu in the ConfigInfoView window
kconfig: qconf: fix signal connection to invalid slots
genksyms: keywords: Use __restrict not _restrict
kbuild: remove redundant patterns in filter/filter-out
extract-cert: add static to local data
Makefile.extrawarn: Move sign-compare from W=2 to W=3
Linus Torvalds [Sat, 22 Aug 2020 17:17:36 +0000 (10:17 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Allow booting of late secondary CPUs affected by erratum 1418040
(currently they are parked if none of the early CPUs are affected by
this erratum).
- Add the 32-bit vdso Makefile to the vdso_install rule so that 'make
vdso_install' installs the 32-bit compat vdso when it is compiled.
- Print a warning that untrusted guests without a CPU erratum
workaround (Cortex-A57 832075) may deadlock the affected system.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ARM64: vdso32: Install vdso32 from vdso_install
KVM: arm64: Print warning when cpu erratum can cause guests to deadlock
arm64: Allow booting of late CPUs affected by erratum 1418040
arm64: Move handling of erratum 1418040 into C code
Linus Torvalds [Sat, 22 Aug 2020 17:03:05 +0000 (10:03 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- PAE and PKU bugfixes for x86
- selftests fix for new binutils
- MMU notifier fix for arm64
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
KVM: x86: fix access code passed to gva_to_gpa
selftests: kvm: Use a shorter encoding to clear RAX
Linus Torvalds [Sat, 22 Aug 2020 16:56:42 +0000 (09:56 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"23 fixes in 5 drivers (qla2xxx, ufs, scsi_debug, fcoe, zfcp). The bulk
of the changes are in qla2xxx and ufs and all are mostly small and
definitely don't impact the core"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"
Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command"
scsi: qla2xxx: Fix null pointer access during disconnect from subsystem
scsi: qla2xxx: Check if FW supports MQ before enabling
scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hba
scsi: qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime
scsi: qla2xxx: Reduce noisy debug message
scsi: qla2xxx: Fix login timeout
scsi: qla2xxx: Indicate correct supported speeds for Mezz card
scsi: qla2xxx: Flush I/O on zone disable
scsi: qla2xxx: Flush all sessions on zone disable
scsi: qla2xxx: Use MBX_TOV_SECONDS for mailbox command timeout values
scsi: scsi_debug: Fix scp is NULL errors
scsi: zfcp: Fix use-after-free in request timeout handlers
scsi: ufs: No need to send Abort Task if the task in DB was cleared
scsi: ufs: Clean up completed request without interrupt notification
scsi: ufs: Improve interrupt handling for shared interrupts
scsi: ufs: Fix interrupt error message for shared interrupts
scsi: ufs-pci: Add quirk for broken auto-hibernate for Intel EHL
scsi: ufs-mediatek: Fix incorrect time to wait link status
...
Linus Torvalds [Sat, 22 Aug 2020 16:31:11 +0000 (09:31 -0700)]
Merge tag 'devicetree-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"Another set of DT fixes:
- restore range parsing error check
- workaround PCI range parsing with missing 'device_type' now
required
- correct description of 'phy-connection-type'
- fix erroneous matching on 'snps,dw-pcie' by 'intel,lgm-pcie' schema
- a couple of grammar and whitespace fixes
- update Shawn Guo's email"
* tag 'devicetree-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: vendor-prefixes: Remove trailing whitespace
dt-bindings: net: correct description of phy-connection-type
dt-bindings: PCI: intel,lgm-pcie: Fix matching on all snps,dw-pcie instances
of: address: Work around missing device_type property in pcie nodes
dt: writing-schema: Miscellaneous grammar fixes
dt-bindings: Use Shawn Guo's preferred e-mail for i.MX bindings
of/address: check for invalid range.cpu_addr
Will Deacon [Tue, 11 Aug 2020 10:27:25 +0000 (11:27 +0100)]
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
When an MMU notifier call results in unmapping a range that spans multiple
PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary,
since this avoids running into RCU stalls during VM teardown. Unfortunately,
if the VM is destroyed as a result of OOM, then blocking is not permitted
and the call to the scheduler triggers the following BUG():
Will Deacon [Tue, 11 Aug 2020 10:27:24 +0000 (11:27 +0100)]
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.
Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.
Cc: <stable@vger.kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-2-will@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Fri, 21 Aug 2020 21:59:16 +0000 (14:59 -0700)]
Merge tag 'io_uring-5.9-2020-08-21' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Make sure the head link cancelation includes async work
- Get rid of kiocb_wait_page_queue_init(), makes no sense to have it as
a separate function since you moved it into io_uring itself
- io_import_iovec cleanups (Pavel, me)
- Use system_unbound_wq for ring exit work, to avoid spawning tons of
these if we have tons of rings exiting at the same time
- Fix req->flags overflow flag manipulation (Pavel)
* tag 'io_uring-5.9-2020-08-21' of git://git.kernel.dk/linux-block:
io_uring: kill extra iovec=NULL in import_iovec()
io_uring: comment on kfree(iovec) checks
io_uring: fix racy req->flags modification
io_uring: use system_unbound_wq for ring exit work
io_uring: cleanup io_import_iovec() of pre-mapped request
io_uring: get rid of kiocb_wait_page_queue_init()
io_uring: find and cancel head link async work on files exit
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, page_alloc: fix core hung in free_pcppages_bulk()
mm: include CMA pages in lowmem_reserve at boot
squashfs: avoid bio_alloc() failure with 1Mbyte blocks
uprobes: __replace_page() avoid BUG in munlock_vma_page()
kernel/relay.c: fix memleak on destroy relay channel
romfs: fix uninitialized memory leak in romfs_dev_read()
mm/rodata_test.c: fix missing function declaration
mm/vunmap: add cond_resched() in vunmap_pmd_range
khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()
hugetlb_cgroup: convert comma to semicolon
mailmap: add Andi Kleen
Linus Torvalds [Fri, 21 Aug 2020 19:32:42 +0000 (12:32 -0700)]
Merge tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- The CLINT driver has been split in two: one to handle the M-mode
CLINT (memory mapped and used on NOMMU systems) and one to handle the
S-mode CLINT (via SBI).
- The addition of SiFive's drivers to rv32_defconfig
* tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add SiFive drivers to rv32_defconfig
dt-bindings: timer: Add CLINT bindings
RISC-V: Remove CLINT related code from timer and arch
clocksource/drivers: Add CLINT timer driver
RISC-V: Add mechanism to provide custom IPI operations
Linus Torvalds [Fri, 21 Aug 2020 19:28:33 +0000 (12:28 -0700)]
Merge tag 'for-linus-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"One build fix and a minor fix for suppressing a useless warning when
booting a Xen dom0 via UEFI"
* tag 'for-linus-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Fix build error when CONFIG_ACPI is not set/enabled:
efi: avoid error message when booting under Xen
Linus Torvalds [Fri, 21 Aug 2020 19:26:58 +0000 (12:26 -0700)]
Merge tag 'pm-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a few issues in the operating performance points (OPP)
framework.
Specifics:
- Fix re-enabling of resources in dev_pm_opp_set_rate() (Rajendra
Nayak)
- Fix OPP table reference counting in error paths (Stephen Boyd)"
* tag 'pm-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
opp: Enable resources again if they were disabled earlier
opp: Put opp table in dev_pm_opp_set_rate() if _set_opp_bw() fails
opp: Put opp table in dev_pm_opp_set_rate() for empty tables
Tom Rix [Fri, 21 Aug 2020 13:56:00 +0000 (06:56 -0700)]
net: dsa: b53: check for timeout
clang static analysis reports this problem
b53_common.c:1583:13: warning: The left expression of the compound
assignment is an uninitialized value. The computed value will
also be garbage
ent.port &= ~BIT(port);
~~~~~~~~ ^
ent is set by a successful call to b53_arl_read(). Unsuccessful
calls are caught by an switch statement handling specific returns.
b32_arl_read() calls b53_arl_op_wait() which fails with the
unhandled -ETIMEDOUT.
So add -ETIMEDOUT to the switch statement. Because
b53_arl_op_wait() already prints out a message, do not add another
one.
Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 21 Aug 2020 18:03:38 +0000 (11:03 -0700)]
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Improvements to ext4's block allocator performance for very large file
systems, especially when the file system or files which are highly
fragmented. There is a new mount option, prefetch_block_bitmaps which
will pull in the block bitmaps and set up the in-memory buddy bitmaps
when the file system is initially mounted.
Beyond that, a lot of bug fixes and cleanups. In particular, a number
of changes to make ext4 more robust in the face of write errors or
file system corruptions"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits)
ext4: limit the length of per-inode prealloc list
ext4: reorganize if statement of ext4_mb_release_context()
ext4: add mb_debug logging when there are lost chunks
ext4: Fix comment typo "the the".
jbd2: clean up checksum verification in do_one_pass()
ext4: change to use fallthrough macro
ext4: remove unused parameter of ext4_generic_delete_entry function
mballoc: replace seq_printf with seq_puts
ext4: optimize the implementation of ext4_mb_good_group()
ext4: delete invalid comments near ext4_mb_check_limits()
ext4: fix typos in ext4_mb_regular_allocator() comment
ext4: fix checking of directory entry validity for inline directories
fs: prevent BUG_ON in submit_bh_wbc()
ext4: correctly restore system zone info when remount fails
ext4: handle add_system_zone() failure in ext4_setup_system_zone()
ext4: fold ext4_data_block_valid_rcu() into the caller
ext4: check journal inode extents more carefully
ext4: don't allow overlapping system zones
ext4: handle error of ext4_setup_system_zone() on remount
ext4: delete the invalid BUGON in ext4_mb_load_buddy_gfp()
...
David Howells [Fri, 21 Aug 2020 09:15:12 +0000 (10:15 +0100)]
afs: Fix NULL deref in afs_dynroot_depopulate()
If an error occurs during the construction of an afs superblock, it's
possible that an error occurs after a superblock is created, but before
we've created the root dentry. If the superblock has a dynamic root
(ie. what's normally mounted on /afs), the afs_kill_super() will call
afs_dynroot_depopulate() to unpin any created dentries - but this will
oops if the root hasn't been created yet.
Fix this by skipping that bit of code if there is no root dentry.
Linus Torvalds [Fri, 21 Aug 2020 17:14:16 +0000 (10:14 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"One regression from 5.8 and a few bugs from earlier kernels:
- Various spelling corrections in kernel prints
- Bug fixes in hfi1 and bntx_re
- Revert a 5.8 patch in hns
- Batch update for Mellanox and Cumulus maintainers emails"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain
Revert "RDMA/hns: Reserve one sge in order to avoid local length error"
RDMA/hfi1: Correct an interlock issue for TID RDMA WRITE request
RDMA/bnxt_re: Do not add user qps to flushlist
RDMA/core: Fix spelling mistake "Could't" -> "Couldn't"
RDMA/usnic: Fix spelling mistake "transistion" -> "transition"
RDMA/hns: Fix spelling mistake "epmty" -> "empty"
Linus Torvalds [Fri, 21 Aug 2020 17:07:54 +0000 (10:07 -0700)]
Merge tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes over several drivers, but all are driver-
specific and nothing looks scary.
Slightly large changes are seen in ASoC qcom driver for the bugs that
were revealed by the recent ASoC core change to report the invalid
register access errors. Also ASoC fsl got a slight intensive change
for the distortion fix.
Others are only trivial fixes or device-specific quirks"
* tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: hda: avoid reset of sdo_limit
ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion
ALSA: usb-audio: ignore broken processing/extension unit
ASoC: intel: Fix memleak in sst_media_open
ASoC: wm8994: Avoid attempts to read unreadable registers
ASoC: msm8916-wcd-analog: fix register Interrupt offset
ASoC: wm8994: Prevent access to invalid VU register bits on WM1811
ALSA: hda/realtek: Add model alc298-samsung-headphone
ALSA: usb-audio: Update documentation comment for MS2109 quirk
ALSA: isa: fix spelling mistakes in the comments
ALSA: usb-audio: Add capture support for Saffire 6 (USB 1.1)
ALSA: hda/realtek: Add quirk for Samsung Galaxy Flex Book
ASoC: q6routing: add dummy register read/write function
ASoC: q6afe-dai: mark all widgets registers as SND_SOC_NOPM
ASoC: Make soc_component_read() returning an error code again
ASoC: amd: Replacing component->name with codec_dai->name.
ASoC: fsl: Fix unused variable warning
ASoC: tegra: tegra210_i2s: Fix compile warning with CONFIG_PM=n
ASoC: tegra: tegra210_dmic: Fix compile warning with CONFIG_PM=n
ASoC: tegra: tegra210_ahub: Fix compile warning with CONFIG_PM=n
...
Linus Torvalds [Fri, 21 Aug 2020 17:02:44 +0000 (10:02 -0700)]
Merge tag 'drm-fixes-2020-08-21' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular fixes pull for rc2. Usual rc2 doesn't seem too busy, mainly
i915 and amdgpu. I'd expect the usual uptick for rc3.
amdgpu:
- Fix allocation size
- SR-IOV fixes
- Vega20 SMU feature state caching fix
- Fix custom pptable handling
- Arcturus golden settings update
- Several display fixes
- Fixes for Navy Flounder
- Misc display fixes
- RAS fix
amdkfd:
- SDMA fix for renoir
i915:
- Fix device parameter usage for selftest mock i915 device
- Fix LPSP capability debugfs NULL dereference
- Fix buddy register pagemask table
- Fix intel_atomic_check() non-negative return value
- Fix selftests passing a random 0 into ilog2()
- Fix TGL power well enable/disable ordering
- Switch to PMU module refcounting
- GVT fixes
virtio:
- Add missing dma_fence_put() in virtio_gpu_execbuffer_ioctl()
- Fix memory leak in virtio_gpu_cleanup_object()"
* tag 'drm-fixes-2020-08-21' of git://anongit.freedesktop.org/drm/drm: (34 commits)
Revert "drm/amdgpu: disable gfxoff for navy_flounder"
drm/i915/tgl: Make sure TC-cold is blocked before enabling TC AUX power wells
drm/i915/selftests: Avoid passing a random 0 into ilog2
drm/i915: Fix wrong return value in intel_atomic_check()
drm/i915: Update bw_buddy pagemask table
drm/i915/display: Check for an LPSP encoder before dereferencing
drm/i915: Copy default modparams to mock i915_device
drm/i915: Provide the perf pmu.module
drm/amd/display: fix pow() crashing when given base 0
drm/amd/display: Reset scrambling on Test Pattern
drm/amd/display: fix dcn3 wide timing dsc validation
drm/amd/display: Fix DFPstate hang due to view port changed
drm/amd/display: Assign correct left shift
drm/amd/display: Call DMUB for eDP power control
drm/amdkfd: fix the wrong sdma instance query for renoir
drm/amdgpu: parse ta firmware for navy_flounder
drm/amdgpu: fix NULL pointer access issue when unloading driver
drm/amdgpu: fix uninit-value in arcturus_log_thermal_throttling_event()
drm/amdgpu: disable gfxoff for navy_flounder
drm/amdgpu/display: use GFP_ATOMIC in dcn20_validate_bandwidth_internal
...
mm, page_alloc: fix core hung in free_pcppages_bulk()
The following race is observed with the repeated online, offline and a
delay between two successive online of memory blocks of movable zone.
P1 P2
Online the first memory block in
the movable zone. The pcp struct
values are initialized to default
values,i.e., pcp->high = 0 &
pcp->batch = 1.
Allocate the pages from the
movable zone.
Try to Online the second memory
block in the movable zone thus it
entered the online_pages() but yet
to call zone_pcp_update().
This process is entered into
the exit path thus it tries
to release the order-0 pages
to pcp lists through
free_unref_page_commit().
As pcp->high = 0, pcp->count = 1
proceed to call the function
free_pcppages_bulk().
Update the pcp values thus the
new pcp values are like, say,
pcp->high = 378, pcp->batch = 63.
Read the pcp's batch value using
READ_ONCE() and pass the same to
free_pcppages_bulk(), pcp values
passed here are, batch = 63,
count = 1.
Since num of pages in the pcp
lists are less than ->batch,
then it will stuck in
while(list_empty(list)) loop
with interrupts disabled thus
a core hung.
Avoid this by ensuring free_pcppages_bulk() is called with proper count of
pcp list pages.
The mentioned race is some what easily reproducible without [1] because
pcp's are not updated for the first memory block online and thus there is
a enough race window for P2 between alloc+free and pcp struct values
update through onlining of second memory block.
With [1], the race still exists but it is very narrow as we update the pcp
struct values for the first memory block online itself.
This is not limited to the movable zone, it could also happen in cases
with the normal zone (e.g., hotplug to a node that only has DMA memory, or
no other memory yet).
Doug Berger [Fri, 21 Aug 2020 00:42:24 +0000 (17:42 -0700)]
mm: include CMA pages in lowmem_reserve at boot
The lowmem_reserve arrays provide a means of applying pressure against
allocations from lower zones that were targeted at higher zones. Its
values are a function of the number of pages managed by higher zones and
are assigned by a call to the setup_per_zone_lowmem_reserve() function.
The function is initially called at boot time by the function
init_per_zone_wmark_min() and may be called later by accesses of the
/proc/sys/vm/lowmem_reserve_ratio sysctl file.
The function init_per_zone_wmark_min() was moved up from a module_init to
a core_initcall to resolve a sequencing issue with khugepaged.
Unfortunately this created a sequencing issue with CMA page accounting.
The CMA pages are added to the managed page count of a zone when
cma_init_reserved_areas() is called at boot also as a core_initcall. This
makes it uncertain whether the CMA pages will be added to the managed page
counts of their zones before or after the call to
init_per_zone_wmark_min() as it becomes dependent on link order. With the
current link order the pages are added to the managed count after the
lowmem_reserve arrays are initialized at boot.
This means the lowmem_reserve values at boot may be lower than the values
used later if /proc/sys/vm/lowmem_reserve_ratio is accessed even if the
ratio values are unchanged.
In many cases the difference is not significant, but for example
an ARM platform with 1GB of memory and the following memory layout
cma: Reserved 256 MiB at 0x0000000030000000
Zone ranges:
DMA [mem 0x0000000000000000-0x000000002fffffff]
Normal empty
HighMem [mem 0x0000000030000000-0x000000003fffffff]
would result in 0 lowmem_reserve for the DMA zone. This would allow
userspace to deplete the DMA zone easily.
Funnily enough
$ cat /proc/sys/vm/lowmem_reserve_ratio
would fix up the situation because as a side effect it forces
setup_per_zone_lowmem_reserve.
This commit breaks the link order dependency by invoking
init_per_zone_wmark_min() as a postcore_initcall so that the CMA pages
have the chance to be properly accounted in their zone(s) and allowing
the lowmem_reserve arrays to receive consistent values.
Fixes: bc22af74f271 ("mm: update min_free_kbytes from khugepaged after core initialization") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Jason Baron <jbaron@akamai.com> Cc: David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1597423766-27849-1-git-send-email-opendmb@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Phillip Lougher [Fri, 21 Aug 2020 00:42:21 +0000 (17:42 -0700)]
squashfs: avoid bio_alloc() failure with 1Mbyte blocks
This is a regression introduced by the patch "migrate from ll_rw_block
usage to BIO".
Bio_alloc() is limited to 256 pages (1 Mbyte). This can cause a failure
when reading 1 Mbyte block filesystems. The problem is a datablock can be
fully (or almost uncompressed), requiring 256 pages, but, because blocks
are not aligned to page boundaries, it may require 257 pages to read.
Bio_kmalloc() can handle 1024 pages, and so use this for the edge
condition.
Fixes: 93e72b3c612a ("squashfs: migrate from ll_rw_block usage to BIO") Reported-by: Nicolas Prochazka <nicolas.prochazka@gmail.com> Reported-by: Tomoatsu Shimada <shimada@walbrix.com> Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Cc: Philippe Liard <pliard@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Adrien Schildknecht <adrien+dev@schischi.me> Cc: Daniel Rosenberg <drosen@google.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200815035637.15319-1-phillip@squashfs.org.uk Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 21 Aug 2020 00:42:17 +0000 (17:42 -0700)]
uprobes: __replace_page() avoid BUG in munlock_vma_page()
syzbot crashed on the VM_BUG_ON_PAGE(PageTail) in munlock_vma_page(), when
called from uprobes __replace_page(). Which of many ways to fix it?
Settled on not calling when PageCompound (since Head and Tail are equals
in this context, PageCompound the usual check in uprobes.c, and the prior
use of FOLL_SPLIT_PMD will have cleared PageMlocked already).
Fixes: 5a52c9df62b4 ("uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLIT") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> [5.4+] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008161338360.20413@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
'chan->buf' is malloced in relay_open() by alloc_percpu() but not free
while destroy the relay channel. Fix it by adding free_percpu() before
return from relay_destroy_channel().
Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: David Rientjes <rientjes@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Daniel Axtens <dja@axtens.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Akash Goel <akash.goel@intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200817122826.48518-1-weiyongjun1@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jann Horn [Fri, 21 Aug 2020 00:42:11 +0000 (17:42 -0700)]
romfs: fix uninitialized memory leak in romfs_dev_read()
romfs has a superblock field that limits the size of the filesystem; data
beyond that limit is never accessed.
romfs_dev_read() fetches a caller-supplied number of bytes from the
backing device. It returns 0 on success or an error code on failure;
therefore, its API can't represent short reads, it's all-or-nothing.
However, when romfs_dev_read() detects that the requested operation would
cross the filesystem size limit, it currently silently truncates the
requested number of bytes. This e.g. means that when the content of a
file with size 0x1000 starts one byte before the filesystem size limit,
->readpage() will only fill a single byte of the supplied page while
leaving the rest uninitialized, leaking that uninitialized memory to
userspace.
Fix it by returning an error code instead of truncating the read when the
requested read operation would go beyond the end of the filesystem.
Fixes: da4458bda237 ("NOMMU: Make it possible for RomFS to use MTD devices directly") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: David Howells <dhowells@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200818013202.2246365-1-jannh@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Like zap_pte_range add cond_resched so that we can avoid softlockups as
reported below. On non-preemptible kernel with large I/O map region (like
the one we get when using persistent memory with sector mode), an unmap of
the namespace can report below softlockups.
Hugh Dickins [Fri, 21 Aug 2020 00:42:02 +0000 (17:42 -0700)]
khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()
syzbot crashes on the VM_BUG_ON_MM(khugepaged_test_exit(mm), mm) in
__khugepaged_enter(): yes, when one thread is about to dump core, has set
core_state, and is waiting for others, another might do something calling
__khugepaged_enter(), which now crashes because I lumped the core_state
test (known as "mmget_still_valid") into khugepaged_test_exit(). I still
think it's best to lump them together, so just in this exceptional case,
check mm->mm_users directly instead of khugepaged_test_exit().
Fixes: bbe98f9cadff ("khugepaged: khugepaged_test_exit() check mmget_still_valid()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Yang Shi <shy828301@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Song Liu <songliubraving@fb.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Eric Dumazet <edumazet@google.com> Cc: <stable@vger.kernel.org> [4.8+] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008141503370.18085@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Gleixner [Wed, 19 Aug 2020 19:44:39 +0000 (21:44 +0200)]
core/entry: Respect syscall number rewrites
The transcript of the x86 entry code to the generic version failed to
reload the syscall number from ptregs after ptrace and seccomp have run,
which both can modify the syscall number in ptregs. It returns the original
syscall number instead which is obviously not the right thing to do.
x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
KVM has an optmization to avoid expensive MRS read/writes on
VMENTER/EXIT. It caches the MSR values and restores them either when
leaving the run loop, on preemption or when going out to user space.
The affected MSRs are not required for kernel context operations. This
changed with the recently introduced mechanism to handle FSGSBASE in the
paranoid entry code which has to retrieve the kernel GSBASE value by
accessing per CPU memory. The mechanism needs to retrieve the CPU number
and uses either LSL or RDPID if the processor supports it.
Unfortunately RDPID uses MSR_TSC_AUX which is in the list of cached and
lazily restored MSRs, which means between the point where the guest value
is written and the point of restore, MSR_TSC_AUX contains a random number.
If an NMI or any other exception which uses the paranoid entry path happens
in such a context, then RDPID returns the random guest MSR_TSC_AUX value.
As a consequence this reads from the wrong memory location to retrieve the
kernel GSBASE value. Kernel GS is used to for all regular this_cpu_*()
operations. If the GSBASE in the exception handler points to the per CPU
memory of a different CPU then this has the obvious consequences of data
corruption and crashes.
As the paranoid entry path is the only place which accesses MSR_TSX_AUX
(via RDPID) and the fallback via LSL is not significantly slower, remove
the RDPID alternative from the entry path and always use LSL.
The alternative would be to write MSR_TSC_AUX on every VMENTER and VMEXIT
which would be inflicting massive overhead on that code path.
[ tglx: Rewrote changelog ]
Fixes: eaad981291ee3 ("x86/entry/64: Introduce the FIND_PERCPU_BASE macro") Reported-by: Tom Lendacky <thomas.lendacky@amd.com> Debugged-by: Tom Lendacky <thomas.lendacky@amd.com> Suggested-by: Andy Lutomirski <luto@kernel.org> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20200821105229.18938-1-pbonzini@redhat.com
Kajol Jain [Fri, 21 Aug 2020 08:06:10 +0000 (13:36 +0530)]
powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
Commit 792f73f747b8 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7
device to show cpumask") added cpumask file as part of hv-24x7 driver
inside the interface folder. The cpumask file is supposed to be in the
top folder of the PMU driver in order to make hotplug work.
This patch fixes that issue and creates new group 'cpumask_attr_group'
to add cpumask file and make sure it added in top folder.
Rob Herring [Mon, 3 Aug 2020 19:31:25 +0000 (13:31 -0600)]
KVM: arm64: Print warning when cpu erratum can cause guests to deadlock
If guests don't have certain CPU erratum workarounds implemented, then
there is a possibility a guest can deadlock the system. IOW, only trusted
guests should be used on systems with the erratum.
This is the case for Cortex-A57 erratum 832075.
Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: kvmarm@lists.cs.columbia.edu Link: https://lore.kernel.org/r/20200803193127.3012242-2-robh@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Marc Zyngier [Fri, 31 Jul 2020 17:38:24 +0000 (18:38 +0100)]
arm64: Allow booting of late CPUs affected by erratum 1418040
As we can now switch from a system that isn't affected by 1418040
to a system that globally is affected, let's allow affected CPUs
to come in at a later time.
Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200731173824.107480-3-maz@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Marc Zyngier [Fri, 31 Jul 2020 17:38:23 +0000 (18:38 +0100)]
arm64: Move handling of erratum 1418040 into C code
Instead of dealing with erratum 1418040 on each entry and exit,
let's move the handling to __switch_to() instead, which has
several advantages:
- It can be applied when it matters (switching between 32 and 64
bit tasks).
- It is written in C (yay!)
- It can rely on static keys rather than alternatives
Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200731173824.107480-2-maz@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Masahiro Yamada [Thu, 20 Aug 2020 17:43:28 +0000 (02:43 +0900)]
kconfig: qconf: replace deprecated QString::sprintf() with QTextStream
QString::sprintf() is deprecated in the latest Qt version, and spawns
a lot of warnings:
HOSTCXX scripts/kconfig/qconf.o
scripts/kconfig/qconf.cc: In member function ‘void ConfigInfoView::menuInfo()’:
scripts/kconfig/qconf.cc:1090:61: warning: ‘QString& QString::sprintf(const char*, ...)’ is deprecated: Use asprintf(), arg() or QTextStream instead [-Wdeprecated-declarations]
1090 | head += QString().sprintf("<a href=\"s%s\">", sym->name);
| ^
In file included from /usr/include/qt5/QtGui/qkeysequence.h:44,
from /usr/include/qt5/QtWidgets/qaction.h:44,
from /usr/include/qt5/QtWidgets/QAction:1,
from scripts/kconfig/qconf.cc:7:
/usr/include/qt5/QtCore/qstring.h:382:14: note: declared here
382 | QString &sprintf(const char *format, ...) Q_ATTRIBUTE_FORMAT_PRINTF(2, 3);
| ^~~~~~~
scripts/kconfig/qconf.cc:1099:60: warning: ‘QString& QString::sprintf(const char*, ...)’ is deprecated: Use asprintf(), arg() or QTextStream instead [-Wdeprecated-declarations]
1099 | head += QString().sprintf("<a href=\"s%s\">", sym->name);
| ^
In file included from /usr/include/qt5/QtGui/qkeysequence.h:44,
from /usr/include/qt5/QtWidgets/qaction.h:44,
from /usr/include/qt5/QtWidgets/QAction:1,
from scripts/kconfig/qconf.cc:7:
/usr/include/qt5/QtCore/qstring.h:382:14: note: declared here
382 | QString &sprintf(const char *format, ...) Q_ATTRIBUTE_FORMAT_PRINTF(2, 3);
| ^~~~~~~
scripts/kconfig/qconf.cc:1127:90: warning: ‘QString& QString::sprintf(const char*, ...)’ is deprecated: Use asprintf(), arg() or QTextStream instead [-Wdeprecated-declarations]
1127 | debug += QString().sprintf("defined at %s:%d<br><br>", _menu->file->name, _menu->lineno);
| ^
In file included from /usr/include/qt5/QtGui/qkeysequence.h:44,
from /usr/include/qt5/QtWidgets/qaction.h:44,
from /usr/include/qt5/QtWidgets/QAction:1,
from scripts/kconfig/qconf.cc:7:
/usr/include/qt5/QtCore/qstring.h:382:14: note: declared here
382 | QString &sprintf(const char *format, ...) Q_ATTRIBUTE_FORMAT_PRINTF(2, 3);
| ^~~~~~~
scripts/kconfig/qconf.cc: In member function ‘QString ConfigInfoView::debug_info(symbol*)’:
scripts/kconfig/qconf.cc:1150:68: warning: ‘QString& QString::sprintf(const char*, ...)’ is deprecated: Use asprintf(), arg() or QTextStream instead [-Wdeprecated-declarations]
1150 | debug += QString().sprintf("prompt: <a href=\"m%s\">", sym->name);
| ^
In file included from /usr/include/qt5/QtGui/qkeysequence.h:44,
from /usr/include/qt5/QtWidgets/qaction.h:44,
from /usr/include/qt5/QtWidgets/QAction:1,
from scripts/kconfig/qconf.cc:7:
/usr/include/qt5/QtCore/qstring.h:382:14: note: declared here
382 | QString &sprintf(const char *format, ...) Q_ATTRIBUTE_FORMAT_PRINTF(2, 3);
| ^~~~~~~
scripts/kconfig/qconf.cc: In static member function ‘static void ConfigInfoView::expr_print_help(void*, symbol*, const char*)’:
scripts/kconfig/qconf.cc:1225:59: warning: ‘QString& QString::sprintf(const char*, ...)’ is deprecated: Use asprintf(), arg() or QTextStream instead [-Wdeprecated-declarations]
1225 | *text += QString().sprintf("<a href=\"s%s\">", sym->name);
| ^
In file included from /usr/include/qt5/QtGui/qkeysequence.h:44,
from /usr/include/qt5/QtWidgets/qaction.h:44,
from /usr/include/qt5/QtWidgets/QAction:1,
from scripts/kconfig/qconf.cc:7:
/usr/include/qt5/QtCore/qstring.h:382:14: note: declared here
382 | QString &sprintf(const char *format, ...) Q_ATTRIBUTE_FORMAT_PRINTF(2, 3);
| ^~~~~~~
The documentation also says:
"Warning: We do not recommend using QString::asprintf() in new Qt code.
Instead, consider using QTextStream or arg(), both of which support
Unicode strings seamlessly and are type-safe."
Use QTextStream as suggested.
Reported-by: Robert Crawford <flacycads@cox.net> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Thu, 20 Aug 2020 15:16:46 +0000 (00:16 +0900)]
kconfig: qconf: remove qInfo() to get back Qt4 support
qconf is supposed to work with Qt4 and Qt5, but since commit c4f7398bee9c ("kconfig: qconf: make debug links work again"),
building with Qt4 fails as follows:
HOSTCXX scripts/kconfig/qconf.o
scripts/kconfig/qconf.cc: In member function ‘void ConfigInfoView::clicked(const QUrl&)’:
scripts/kconfig/qconf.cc:1241:3: error: ‘qInfo’ was not declared in this scope; did you mean ‘setInfo’?
1241 | qInfo() << "Clicked link is empty";
| ^~~~~
| setInfo
scripts/kconfig/qconf.cc:1254:3: error: ‘qInfo’ was not declared in this scope; did you mean ‘setInfo’?
1254 | qInfo() << "Clicked symbol is invalid:" << data;
| ^~~~~
| setInfo
make[1]: *** [scripts/Makefile.host:129: scripts/kconfig/qconf.o] Error 1
make: *** [Makefile:606: xconfig] Error 2
qInfo() does not exist in Qt4. In my understanding, these call-sites
should be unreachable. Perhaps, qWarning(), assertion, or something
is better, but qInfo() is not the right one to use here, I think.
Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again") Reported-by: Ronald Warsow <rwarsow@gmx.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
So fix it by calling rcu_read_lock() in tipc_aead_encrypt_done()
for b->media->send_msg().
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Reported-by: syzbot+47bbc6b678d317cccbe0@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alaa Hleihel [Wed, 19 Aug 2020 15:24:10 +0000 (18:24 +0300)]
net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow
tcf_ct_handle_fragments() shouldn't free the skb when ip_defrag() call
fails. Otherwise, we will cause a double-free bug.
In such cases, just return the error to the caller.
Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Laight [Wed, 19 Aug 2020 14:40:52 +0000 (14:40 +0000)]
net: sctp: Fix negotiation of the number of data streams.
The number of output and input streams was never being reduced, eg when
processing received INIT or INIT_ACK chunks.
The effect is that DATA chunks can be sent with invalid stream ids
and then discarded by the remote system.
Fixes: 2075e50caf5ea ("sctp: convert to genradix") Signed-off-by: David Laight <david.laight@aculab.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
- Remove pinctrl consumer properties, as they are handled by core
dt-schema,
- Document missing properties,
- Document missing PHY child node,
- Add "additionalProperties: false".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mark Tomlinson [Wed, 19 Aug 2020 01:53:58 +0000 (13:53 +1200)]
gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY
When receiving an IPv4 packet inside an IPv6 GRE packet, and the
IP6_TNL_F_RCV_DSCP_COPY flag is set on the tunnel, the IPv4 header would
get corrupted. This is due to the common ip6_tnl_rcv() function assuming
that the inner header is always IPv6. This patch checks the tunnel
protocol for IPv4 inner packets, but still defaults to IPv6.
Fixes: 308edfdf1563 ("gre6: Cleanup GREv6 receive path, call common GRE functions") Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Thu, 20 Aug 2020 21:53:15 +0000 (14:53 -0700)]
hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()
netvsc_vf_xmit() / dev_queue_xmit() will call VF NIC’s ndo_select_queue
or netdev_pick_tx() again. They will use skb_get_rx_queue() to get the
queue number, so the “skb->queue_mapping - 1” will be used. This may
cause the last queue of VF not been used.
Use skb_record_rx_queue() here, so that the skb_get_rx_queue() called
later will get the correct queue number, and VF will be able to use
all queues.
Fixes: b3bf5666a510 ("hv_netvsc: defer queue selection to VF") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Thu, 20 Aug 2020 21:53:14 +0000 (14:53 -0700)]
hv_netvsc: Remove "unlikely" from netvsc_select_queue
When using vf_ops->ndo_select_queue, the number of queues of VF is
usually bigger than the synthetic NIC. This condition may happen
often.
Remove "unlikely" from the comparison of ndev->real_num_tx_queues.
Fixes: b3bf5666a510 ("hv_netvsc: defer queue selection to VF") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yauheni Kaliuta [Thu, 20 Aug 2020 11:58:43 +0000 (14:58 +0300)]
bpf: selftests: global_funcs: Check err_str before strstr
The error path in libbpf.c:load_program() has calls to pr_warn()
which ends up for global_funcs tests to
test_global_funcs.c:libbpf_debug_print().
For the tests with no struct test_def::err_str initialized with a
string, it causes call of strstr() with NULL as the second argument
and it segfaults.
Fix it by calling strstr() only for non-NULL err_str.
Andrii Nakryiko [Thu, 20 Aug 2020 05:28:41 +0000 (22:28 -0700)]
bpf: xdp: Fix XDP mode when no mode flags specified
7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device")
inadvertently changed which XDP mode is assumed when no mode flags are
specified explicitly. Previously, driver mode was preferred, if driver
supported it. If not, generic SKB mode was chosen. That commit changed default
to SKB mode always. This patch fixes the issue and restores the original
logic.
Fixes: 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device") Reported-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/bpf/20200820052841.1559757-1-andriin@fb.com
Calling generic selftests "make install" fails as rsync expects all
files from TEST_GEN_PROGS to be present. The binary is not generated
anymore (commit 3b09d27cc93d) so we can safely remove it from there
and also from gitignore.
Peilin Ye [Thu, 20 Aug 2020 14:30:52 +0000 (16:30 +0200)]
net/smc: Prevent kernel-infoleak in __smc_diag_dump()
__smc_diag_dump() is potentially copying uninitialized kernel stack memory
into socket buffers, since the compiler may leave a 4-byte hole near the
beginning of `struct smcd_diag_dmbinfo`. Fix it by initializing `dinfo`
with memset().
Fixes: 4b1b7d3b30a6 ("net/smc: add SMC-D diag support") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Thu, 20 Aug 2020 10:47:19 +0000 (11:47 +0100)]
sfc: fix build warnings on 32-bit
Truncation of DMA_BIT_MASK to 32-bit dma_addr_t is semantically safe,
but the compiler was warning because it was happening implicitly.
Insert explicit casts to suppress the warnings.
Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
Bin Meng [Thu, 16 Jul 2020 04:39:53 +0000 (21:39 -0700)]
riscv: Add SiFive drivers to rv32_defconfig
This adds SiFive drivers to rv32_defconfig, to keep in sync with the
64-bit config. This is useful when testing 32-bit kernel with QEMU
'sifive_u' 32-bit machine.
Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Anup Patel [Mon, 17 Aug 2020 12:42:50 +0000 (18:12 +0530)]
RISC-V: Remove CLINT related code from timer and arch
Right now the RISC-V timer driver is convoluted to support:
1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for
clocksource and SBI timer calls for clockevent device.
2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO
counter register for clocksource and CLINT MMIO compare register
for clockevent device.
We now have a separate CLINT timer driver which also provide CLINT
based IPI operations so let's remove CLINT MMIO related code from
arch/riscv directory and RISC-V timer driver.
Anup Patel [Mon, 17 Aug 2020 12:42:49 +0000 (18:12 +0530)]
clocksource/drivers: Add CLINT timer driver
We add a separate CLINT timer driver for Linux RISC-V M-mode (i.e.
RISC-V NoMMU kernel).
The CLINT MMIO device provides three things:
1. 64bit free running counter register
2. 64bit per-CPU time compare registers
3. 32bit per-CPU inter-processor interrupt registers
Unlike other timer devices, CLINT provides IPI registers along with
timer registers. To use CLINT IPI registers, the CLINT timer driver
provides IPI related callbacks to arch/riscv.
Linus Torvalds [Thu, 20 Aug 2020 17:48:17 +0000 (10:48 -0700)]
Merge tag 'dma-mapping-5.9-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fix more fallout from the dma-pool changes (Nicolas Saenz Julienne,
me)"
* tag 'dma-mapping-5.9-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-pool: Only allocate from CMA when in same memory zone
dma-pool: fix coherent pool allocations for IOMMU mappings
David Howells [Thu, 20 Aug 2020 13:37:12 +0000 (14:37 +0100)]
afs: Fix key ref leak in afs_put_operation()
The afs_put_operation() function needs to put the reference to the key
that's authenticating the operation.
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Reported-by: Dave Botsch <botsch@cnf.cornell.edu> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) framework fixes for 5.9-rc2
from Viresh Kumar:
"This contains the following fixes for 5.9:
- Fix re-enabling of resources (Rajendra Nayak).
- Put OPP table references (Stephen Boyd)."
* 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Enable resources again if they were disabled earlier
opp: Put opp table in dev_pm_opp_set_rate() if _set_opp_bw() fails
opp: Put opp table in dev_pm_opp_set_rate() for empty tables
Vasant Hegde [Thu, 20 Aug 2020 06:18:44 +0000 (11:48 +0530)]
powerpc/pseries: Do not initiate shutdown when system is running on UPS
As per PAPR we have to look for both EPOW sensor value and event
modifier to identify the type of event and take appropriate action.
In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes":
SYSTEM_SHUTDOWN 3
The system must be shut down. An EPOW-aware OS logs the EPOW error
log information, then schedules the system to be shut down to begin
after an OS defined delay internal (default is 10 minutes.)
Then in section 10.3.2.2.8 there is table 146 "Platform Event Log
Format, Version 6, EPOW Section", which includes the "EPOW Event
Modifier":
For EPOW sensor value = 3
0x01 = Normal system shutdown with no additional delay
0x02 = Loss of utility power, system is running on UPS/Battery
0x03 = Loss of system critical functions, system should be shutdown
0x04 = Ambient temperature too high
All other values = reserved
We have a user space tool (rtas_errd) on LPAR to monitor for
EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown
after predefined time. It also starts monitoring for any new EPOW
events. If it receives "Power restored" event before predefined time
it will cancel the shutdown. Otherwise after predefined time it will
shutdown the system.
Commit 79872e35469b ("powerpc/pseries: All events of
EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of
the "on UPS/Battery" case, to immediately shutdown the system. This
breaks existing setups that rely on the userspace tool to delay
shutdown and let the system run on the UPS.
Fixes: 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: Massage change log and add PAPR references] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200820061844.306460-1-hegdevasant@linux.vnet.ibm.com
Pavel Begunkov [Thu, 20 Aug 2020 08:34:10 +0000 (11:34 +0300)]
io_uring: comment on kfree(iovec) checks
kfree() handles NULL pointers well, but io_{read,write}() checks it
because of performance reasons. Leave a comment there for those who are
tempted to patch it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Thu, 20 Aug 2020 08:33:35 +0000 (11:33 +0300)]
io_uring: fix racy req->flags modification
Setting and clearing REQ_F_OVERFLOW in io_uring_cancel_files() and
io_cqring_overflow_flush() are racy, because they might be called
asynchronously.
REQ_F_OVERFLOW flag in only needed for files cancellation, so if it can
be guaranteed that requests _currently_ marked inflight can't be
overflown, the problem will be solved with removing the flag
altogether.
That's how the patch works, it removes inflight status of a request
in io_cqring_fill_event() whenever it should be thrown into CQ-overflow
list. That's Ok to do, because no opcode specific handling can be done
after io_cqring_fill_event(), the same assumption as with "struct
io_completion" patches.
And it already have a good place for such cleanups, which is
io_clean_op(). A nice side effect of this is removing this inflight
check from the hot path.
note on synchronisation: now __io_cqring_fill_event() may be taking two
spinlocks simultaneously, completion_lock and inflight_lock. It's fine,
because we never do that in reverse order, and CQ-overflow of inflight
requests shouldn't happen often.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Weihang Li [Wed, 19 Aug 2020 09:39:44 +0000 (17:39 +0800)]
Revert "RDMA/hns: Reserve one sge in order to avoid local length error"
This patch caused some issues on SEND operation, and it should be reverted
to make the drivers work correctly. There will be a better solution that
has been tested carefully to solve the original problem.
The issue happens when TID RDMA WRITE request is followed by an
IB_WR_RDMA_WRITE_WITH_IMM request, the latter could be completed first on
the responder side. As a result, no ACK packet for the latter could be
sent because the TID RDMA WRITE request is still being processed on the
responder side.
When the TID RDMA WRITE request is eventually completed, the requester
will wait for the IB_WR_RDMA_WRITE_WITH_IMM request to be acknowledged.
If the next request is another TID RDMA WRITE request, no TID RDMA WRITE
DATA packet could be sent because the preceding IB_WR_RDMA_WRITE_WITH_IMM
request is not completed yet.
Consequently the IB_WR_RDMA_WRITE_WITH_IMM will be retried but it will be
ignored on the responder side because the responder thinks it has already
been completed. Eventually the retry will be exhausted and the qp will be
put into error state on the requester side. On the responder side, the TID
resource timer will eventually expire because no TID RDMA WRITE DATA
packets will be received for the second TID RDMA WRITE request. There is
also risk of a write-after-write memory corruption due to the issue.
Fix by adding a requester side interlock to prevent any potential data
corruption and TID RDMA protocol error.
Fixes: a0b34f75ec20 ("IB/hfi1: Add interlock between a TID RDMA request and other requests") Link: https://lore.kernel.org/r/20200811174931.191210.84093.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> # 5.4.x+ Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Selvin Xavier [Thu, 6 Aug 2020 04:45:48 +0000 (21:45 -0700)]
RDMA/bnxt_re: Do not add user qps to flushlist
Driver shall add only the kernel qps to the flush list for clean up.
During async error events from the HW, driver is adding qps to this list
without checking if the qp is kernel qp or not.
Add a check to avoid user qp addition to the flush list.
Fixes: 942c9b6ca8de ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing") Fixes: c50866e2853a ("bnxt_re: fix the regression due to changes in alloc_pbl") Link: https://lore.kernel.org/r/1596689148-4023-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Athira Rajeev [Thu, 6 Aug 2020 12:46:32 +0000 (08:46 -0400)]
powerpc/perf: Fix soft lockups due to missed interrupt accounting
Performance monitor interrupt handler checks if any counter has
overflown and calls record_and_restart() in core-book3s which invokes
perf_event_overflow() to record the sample information. Apart from
creating sample, perf_event_overflow() also does the interrupt and
period checks via perf_event_account_interrupt().
Currently we record information only if the SIAR (Sampled Instruction
Address Register) valid bit is set (using siar_valid() check) and
hence the interrupt check.
But it is possible that we do sampling for some events that are not
generating valid SIAR, and hence there is no chance to disable the
event if interrupts are more than max_samples_per_tick. This leads to
soft lockup.
Fix this by adding perf_event_account_interrupt() in the invalid SIAR
code path for a sampling event. ie if SIAR is invalid, just do
interrupt check and don't record the sample information.