John Stultz [Sat, 12 Feb 2011 01:45:40 +0000 (17:45 -0800)]
RTC: Revert UIE emulation removal
Uwe pointed out that my alarm based UIE emulation is not sufficient
to replace the older timer/polling based UIE emulation on devices
where there is no alarm irq. This causes rtc devices without alarms
to return -EINVAL to UIE ioctls. The fix is to re-instate the old
timer/polling method for devices without alarm irqs.
John Stultz [Thu, 3 Feb 2011 01:02:41 +0000 (17:02 -0800)]
RTC: Convert rtc drivers to use the alarm_irq_enable method
Some rtc drivers use the ioctl method instead of the alarm_irq_enable
method for enabling alarm interupts. With the new virtualized RTC
rework, its important for drivers to use the alarm_irq_enable instead.
This patch converts the drivers that use the AIE ioctl method to
use the alarm_irq_enable method. Other ioctl cmds are left untouched.
I have not been able to test or even compile most of these drivers.
Any help to make sure this change is correct would be appreciated!
John Stultz [Thu, 3 Feb 2011 00:55:19 +0000 (16:55 -0800)]
RTC: Fix rtc driver ioctl specific shortcutting
Some RTC drivers enable functionality directly via their ioctl method
instead of using the generic ioctl handling code. With the recent
virtualization of the RTC layer, its now important that the generic
layer always be used.
This patch moved the rtc driver ioctl method call to after the generic
ioctl processing is done. This allows hardware specific features or
ioctls to still function, while relying on the generic code for handling
everything else.
This patch on its own may more obviously break rtc drivers that
implement the alarm irq enablement via their ioctl method instead of
implementing the alarm_irq_eanble method. Those drivers will be fixed
in a following patch. Additionaly, those drivers are already likely to
not be functioning reliably without this patch.
This patch prevents a user space program from calling the RTC_IRQP_SET
ioctl with a negative value of frequency. Also, if this call is make
with a zero value of frequency, there would be a division by zero in the
kernel code.
[jstultz: Also initialize irq_freq to 1 to catch other divbyzero issues]
CC: Alessandro Zummo <a.zummo@towertech.it> CC: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: John Stultz <john.stultz@linaro.org>
Linus Torvalds [Thu, 3 Feb 2011 19:19:26 +0000 (11:19 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
RDMA: Update missed conversion of flush_scheduled_work()
RDMA/ucma: Copy iWARP route information on queries
RDMA/amso1100: Fix compile warnings
RDMA/cxgb4: Set the correct device physical function for iWARP connections
RDMA/cxgb4: Limit MAXBURST EQ context field to 256B
IB/qib: Hold link for TX SERDES settings
mlx4_core: Add ConnectX-3 device IDs
Linus Torvalds [Thu, 3 Feb 2011 16:55:07 +0000 (08:55 -0800)]
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix update_curr_rt()
sched, docs: Update schedstats documentation to version 15
Will call update_curr_rt() on rq->curr, which at that time is
rq->stop. The problem is that rq->stop.prio matches an RT prio and
thus falsely assumes its a rt_sched_class task.
Reported-Debuged-Tested-Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission> Cc: stable@kernel.org # .37 Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Wed, 26 Jan 2011 14:38:35 +0000 (15:38 +0100)]
perf: Fix reading in perf_event_read()
It is quite possible for the event to have been disabled between
perf_event_read() sending the IPI and the CPU servicing the IPI and
calling __perf_event_read(), hence revalidate the state.
Apparently setting inode->bdi to one's own sb->s_bdi stops VFS from
sending *read-aheads*. This problem was bisected to this commit. A
revert fixes it. I'll investigate farther why is this happening for the
next Kernel, but for now a revert.
I'm sending to stable@kernel.org as well, since it exists also in
2.6.37. 2.6.36 is good and does not have this patch.
Linus Torvalds [Thu, 3 Feb 2011 01:52:19 +0000 (17:52 -0800)]
Merge branch 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
[media] fix saa7111 non-detection
[media] rc/streamzap: fix reporting response times
[media] mceusb: really fix remaining keybounce issues
[media] rc: use time unit conversion macros correctly
[media] rc/ir-lirc-codec: add back debug spew
[media] ir-kbd-i2c: improve remote behavior with z8 behind usb
[media] lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_send
[media] hdpvr: fix up i2c device registration
[media] rc/mce: add mappings for missing keys
[media] gspca - zc3xx: Discard the partial frames
[media] gspca - zc3xx: Fix bad images with the sensor hv7131r
[media] gspca - zc3xx: Bad delay when given by a table
Josef Bacik [Tue, 1 Feb 2011 23:52:47 +0000 (15:52 -0800)]
fs: make block fiemap mapping length at least blocksize long
Some filesystems don't deal well with being asked to map less than
blocksize blocks (GFS2 for example). Since we are always mapping at least
blocksize sections anyway, just make sure len is at least as big as a
blocksize so we don't trip up any filesystems. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Namhyung Kim [Tue, 1 Feb 2011 23:52:46 +0000 (15:52 -0800)]
vfs: sparse: add __FMODE_EXEC
FMODE_EXEC is a constant type of fmode_t but was used with normal integer
constants. This results in following warnings from sparse. Fix it using
new macro __FMODE_EXEC.
fs/exec.c:116:58: warning: restricted fmode_t degrades to integer
fs/exec.c:689:58: warning: restricted fmode_t degrades to integer
fs/fcntl.c:777:9: warning: restricted fmode_t degrades to integer
Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memcg: fix event counting breakage from recent THP update
Changes in e401f1761 ("memcg: modify accounting function for supporting
THP better") adds nr_pages to support multiple page size in
memory_cgroup_charge_statistics.
But counting the number of event nees abs(nr_pages) for increasing
counters. This patch fixes event counting.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Tue, 1 Feb 2011 23:52:43 +0000 (15:52 -0800)]
memcg: prevent endless loop when charging huge pages to near-limit group
If reclaim after a failed charging was unsuccessful, the limits are
checked again, just in case they settled by means of other tasks.
This is all fine as long as every charge is of size PAGE_SIZE, because in
that case, being below the limit means having at least PAGE_SIZE bytes
available.
But with transparent huge pages, we may end up in an endless loop where
charging and reclaim fail, but we keep going because the limits are not
yet exceeded, although not allowing for a huge page.
Fix this up by explicitely checking for enough room, not just whether we
are within limits.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Tue, 1 Feb 2011 23:52:42 +0000 (15:52 -0800)]
memcg: prevent endless loop when charging huge pages
The charging code can encounter a charge size that is bigger than a
regular page in two situations: one is a batched charge to fill the
per-cpu stocks, the other is a huge page charge.
This code is distributed over two functions, however, and only the outer
one is aware of huge pages. In case the charging fails, the inner
function will tell the outer function to retry if the charge size is
bigger than regular pages--assuming batched charging is the only case.
And the outer function will retry forever charging a huge page.
This patch makes sure the inner function can distinguish between batch
charging and a single huge page charge. It will only signal another
attempt if batch charging failed, and go into regular reclaim when it is
called on behalf of a huge page.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jin Dongming [Tue, 1 Feb 2011 23:52:41 +0000 (15:52 -0800)]
thp: fix unsuitable behavior for hwpoisoned tail page
When a tail page of THP is poisoned, memory-failure will do nothing except
setting PG_hwpoison, while the expected behavior is that the process, who
is using the poisoned tail page, should be killed.
The above problem is caused by lru check of the poisoned tail page of THP.
Because PG_lru flag is only set on the head page of THP, the check always
consider the poisoned tail page as NON lru page.
So the lru check for the tail page of THP should be avoided, as like as
hugetlb.
This patch adds !PageTransCompound() before lru check for THP, because of
the check (!PageHuge() && !PageTransCompound()) the whole branch could be
optimized away at build time when both hugetlbfs and THP are set with "N"
(or in archs not supporting either of those).
[akpm@linux-foundation.org: fix unrelated typo in shake_page() comment] Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jin Dongming [Tue, 1 Feb 2011 23:52:40 +0000 (15:52 -0800)]
thp: fix the wrong reported address of hwpoisoned hugepages
When the tail page of THP is poisoned, the head page will be poisoned too.
And the wrong address, address of head page, will be sent with sigbus
always.
So when the poisoned page is used by Guest OS which is running on KVM,
after the address changing(hva->gpa) by qemu, the unexpected process on
Guest OS will be killed by sigbus.
What we expected is that the process using the poisoned tail page could be
killed on Guest OS, but not that the process using the healthy head page
is killed.
Since it is not good to poison the healthy page, avoid poisoning other
than the page which is really poisoned.
(While we poison all pages in a huge page in case of hugetlb,
we can do this for THP thanks to split_huge_page().)
Here we fix two parts:
1. Isolate the poisoned page only to make sure
the reported address is the address of poisoned page.
2. make the poisoned page work as the poisoned regular page.
[akpm@linux-foundation.org: fix spello in comment] Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jin Dongming [Tue, 1 Feb 2011 23:52:39 +0000 (15:52 -0800)]
thp: fix splitting of hwpoisoned hugepages
The poisoned THP is now split with split_huge_page() in
collect_procs_anon(). If kmalloc() is failed in collect_procs(),
split_huge_page() could not be called. And the work after
split_huge_page() for collecting the processes using poisoned page will
not be done, too. So the processes using the poisoned page could not be
killed.
The condition becomes worse when CONFIG_DEBUG_VM == "Y". Because the
poisoned THP could not be split, system panic will be caused by
VM_BUG_ON(PageTransHuge(page)) in try_to_unmap().
This patch does:
1. move split_huge_page() to the place before collect_procs().
This can be sure the failure of splitting THP is caused by itself.
2. when splitting THP is failed, stop the operations after it.
This can avoid unexpected system panic or non sense works.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Dooks [Tue, 1 Feb 2011 23:52:38 +0000 (15:52 -0800)]
MAINTAINERS: fixup Simtec support email entries
The support@simtec.co.uk address is for direct customer support only, the
EB2410ITX and EB110ATX entries should direct to the Simtec Linux Team
address of linux@simtec.co.uk
Also add correct email address for Vincent Sanders
[akpm@linux-foundation.org: fix Vincent's address] Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Vincent Sanders <vince@simtec.co.uk> Cc: Simtec Support <support@simtec.co.uk> Cc: Simtec Linux Team <linux@simtec.co.uk> Cc: Jack Stone <jwjstone@fastmail.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Dooks [Tue, 1 Feb 2011 23:52:37 +0000 (15:52 -0800)]
MAINTAINERS: fixup file entries for "SIMTEC EB2410ITX (BAST)"
Add the correct files for the Simtec BAST machine, ensuring the IDE and
IRQ routing are added, and move to the machine specific file instead of
trying to catch all of arch/arm/mach-s3c2410
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Simtec Linux Team <linux@simtec.co.uk> Cc: Simtec Support <support@simtec.co.uk> Cc: Jack Stone <jwjstone@fastmail.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Dooks [Tue, 1 Feb 2011 23:52:36 +0000 (15:52 -0800)]
MAINTAINERS: move s3c2410 drivers to ARM/SAMSUNG ARM
There are currently two entries under the "SIMTEC EB2410ITX (BAST)"
machine entry for drivers/*/*s3c2410*, which is catching everything
s3c2410 driver related.
This entry is for a specific S3C2410 based machine, so move these two file
entries to the "ARM/SAMSUNG ARM ARCHITECTURES" entry, where it will reach
a wider audience of interested parties.
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Simtec Linux Team <linux@simtec.co.uk> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Jack Stone <jwjstone@fastmail.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Dumazet [Tue, 1 Feb 2011 23:52:35 +0000 (15:52 -0800)]
epoll: epoll_wait() should not use timespec_add_ns()
commit 95aac7b1cd224f ("epoll: make epoll_wait() use the hrtimer range
feature") added a performance regression because it uses timespec_add_ns()
with potential very large 'ns' values.
[akpm@linux-foundation.org: s/epoll_set_mstimeout/ep_set_mstimeout/, per Davide] Reported-by: Simon Kirby <sim@hostway.ca> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Shawn Bohrer <shawn.bohrer@gmail.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: <stable@kernel.org> [2.6.37.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Tue, 1 Feb 2011 23:52:33 +0000 (15:52 -0800)]
mm/migration: fix page corruption during hugepage migration
If migrate_huge_page by memory-failure fails , it calls put_page in itself
to decrease page reference and caller of migrate_huge_page also calls
putback_lru_pages. It can do double free of page so it can make page
corruption on page holder.
In addtion, clean of pages on caller is consistent behavior with
migrate_pages by cf608ac19c ("mm: compaction: fix COMPACTPAGEFAILED
counting").
Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm: when migrate_pages returns 0, all pages must have been released
In some cases migrate_pages could return zero while still leaving a few
pages in the pagelist (and some caller wouldn't notice it has to call
putback_lru_pages after commit cf608ac19c9 ("mm: compaction: fix
COMPACTPAGEFAILED counting")).
Add one missing putback_lru_pages not added by commit cf608ac19c95 ("mm:
compaction: fix COMPACTPAGEFAILED counting").
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Lameter <cl@linux.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Tue, 1 Feb 2011 23:52:31 +0000 (15:52 -0800)]
memsw: deprecate noswapaccount kernel parameter and schedule it for removal
noswapaccount couldn't be used to control memsw for both on/off cases so
we have added swapaccount[=0|1] parameter. This way we can turn the
feature in two ways noswapaccount resp. swapaccount=0. We have kept the
original noswapaccount but I think we should remove it after some time as
it just makes more command line parameters without any advantages and also
the code to handle parameters is uglier if we want both parameters.
Signed-off-by: Michal Hocko <mhocko@suse.cz> Requested-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__setup based kernel command line parameters handlers which are handled in
obsolete_checksetup are provided with the parameter value including =
(more precisely everything right after the parameter name).
This means that the current implementation of swapaccount[=1|0] doesn't
work at all because if there is a value for the parameter then we are
testing for "0" resp. "1" but we are getting "=0" resp. "=1" and if
there is no parameter value we are getting an empty string rather than
NULL.
The original noswapccount parameter, which doesn't care about the value,
works correctly.
Thomas Gleixner [Fri, 28 Jan 2011 07:47:15 +0000 (08:47 +0100)]
genirq: Prevent irq storm on migration
move_native_irq() masks and unmasks the interrupt line
unconditionally, but the interrupt line might be masked due to a
threaded oneshot handler in progress. Unmasking the line in that case
can lead to interrupt storms. Observed on PREEMPT_RT.
Originally-from: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
Linus Torvalds [Tue, 1 Feb 2011 23:23:58 +0000 (10:23 +1100)]
Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze
* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Fix ASM optimized code for LE
microblaze: Fix unaligned issue on MMU system with BS=0 DIV=1
microblaze: Fix DTB passing from bootloader
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: fix length checks in checkSMB
[CIFS] Update cifs minor version
cifs: No need to check crypto blockcipher allocation
cifs: clean up some compiler warnings
cifs: make CIFS depend on CRYPTO_MD4
cifs: force a reconnect if there are too many MIDs in flight
cifs: don't pop a printk when sending on a socket is interrupted
cifs: simplify SMB header check routine
cifs: send an NT_CANCEL request when a process is signalled
cifs: handle cancelled requests better
cifs: fix two compiler warning about uninitialized vars
mlock: operate on any regions with protection != PROT_NONE
As Tao Ma noticed, change 5ecfda0 breaks blktrace. This is because
blktrace mmaps a file with PROT_WRITE permissions but without PROT_READ,
so my attempt to not unnecessarity break COW during mlock ended up
causing mlock to fail with a permission problem.
I am proposing to let mlock ignore vma protection in all cases except
PROT_NONE. In particular, mlock should not fail for PROT_WRITE regions
(as in the blktrace case, which broke at 5ecfda0) or for PROT_EXEC
regions (which seem to me like they were always broken).
Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The comments under "config STUB_POULSBO" are close to correct,
but they are not being followed. This patch updates them to reflect
the requirements for THERMAL.
This build error is caused by STUB_POULSBO selecting ACPI_VIDEO
when ACPI_VIDEO's config requirements are not met.
Jeff Layton [Mon, 31 Jan 2011 14:14:17 +0000 (09:14 -0500)]
cifs: fix length checks in checkSMB
The cERROR message in checkSMB when the calculated length doesn't match
the RFC1001 length is incorrect in many cases. It always says that the
RFC1001 length is bigger than the SMB, even when it's actually the
reverse.
Fix the error message to say the reverse of what it does now when the
SMB length goes beyond the end of the received data. Also, clarify the
error message when the RFC length is too big. Finally, clarify the
comments to show that the 512 byte limit on extra data at the end of
the packet is arbitrary.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Linus Torvalds [Mon, 31 Jan 2011 22:27:55 +0000 (08:27 +1000)]
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR
arm: omap2: mux: fix compile warning
omap1: Simplify use of omap_irq_flags
omap2+: Fix unused variable warning for omap_irq_base
Randy Dunlap [Mon, 31 Jan 2011 17:29:14 +0000 (09:29 -0800)]
kernel.h: fix kernel-doc warning
Fix kernel-doc warning in kernel.h from commit 7ef88ad56145
("BUILD_BUG_ON: make it handle more cases"):
Warning(include/linux/kernel.h:605): No description found for parameter 'condition'
Warning(include/linux/kernel.h:605): Excess function parameter 'cond' description in 'BUILD_BUG_ON'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patches should keep coming through Rusty but it helps if I'm Cc'd as
well.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 31 Jan 2011 22:07:40 +0000 (08:07 +1000)]
Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (42 commits)
usb: gadget: composite: avoid access beyond array max length
USB: serial: handle Data Carrier Detect changes
USB: gadget: Fix endpoint representation in ci13xxx_udc
USB: gadget: Fix error path in ci13xxx_udc gadget probe function
usb: pch_udc: Fix the worning log issue at gadget driver remove
USB: serial: Updated support for ICOM devices
USB: ehci-mxc: add work-around for efika mx/sb bug
USB: unbreak ehci-mxc on otg port of i.MX27
drivers: update to pl2303 usb-serial to support Motorola cables
USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products
USB serial: add missing .usb_driver field in serial drivers
USB: ehci-fsl: Fix 'have_sysif_regs' detection
USB: g_printer: fix bug in module parameter definitions
USB: g_printer: fix bug in unregistration
USB: uss720: remove duplicate USB device
MAINTAINERS: add ueagle-atm entry
USB: EHCI: fix DMA deallocation bug
USB: pch_udc: support new device ML7213 IOH
usb: pch_udc: Fixed issue which does not work with g_serial
usb: set ep_dev async suspend should be later than device_initialize
...
Linus Torvalds [Mon, 31 Jan 2011 22:06:31 +0000 (08:06 +1000)]
Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits)
staging: r8712u: Add new device IDs
staging: brcm80211: fix suspend/resume issue in brcmsmac
staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel
Staging: iio: Aditional fixpoint formatted output bugfix
staging: usbip: vhci: use urb->dev->portnum to find port
staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO
staging: usbip: vhci: friendly log messages for connection errors
staging: usbip: vhci: refuse to enqueue for dead connections
staging: usbip: vhci: give back URBs from in-flight unlink requests
staging: usbip: vhci: update reference count for usb_device
staging: usbip: stub: update refcounts for devices and interfaces
staging: tidspbridge: replace mbox callback with notifier_call
staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card
Staging: speakup: &&/|| confusion in silent_store()
iio: Fixpoint formatted output bugfix
staging: rt2860: Fix incorrect netif_stop_queue usage warning
staging: r8712u: Fix memory leak in firmware loading
staging: tidspbridge: configure full L1 MMU range
staging: rt2870sta: Add ID for Linksys WUSB100v2
Staging: xgfib: put parenthesis in the right place
...
Linus Torvalds [Mon, 31 Jan 2011 22:05:19 +0000 (08:05 +1000)]
Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
tty/serial: fix apbuart build
n_hdlc: fix read and write locking
serial: unbreak billionton CF card
tty: use for_each_console() and WARN() on sysfs failures
vt: fix issue when fbcon wants to takeover a second time.
Russell King [Sun, 30 Jan 2011 16:40:20 +0000 (16:40 +0000)]
ARM: smp_on_up: allow non-ARM SMP processors
Allow non-ARM SMP processors to use the SMP_ON_UP feature. CPUs
supporting SMP must have the new CPU ID format, so check for this first.
Then check for ARM11MPCore, which fails the MPIDR check. Lastly check
the MPIDR reports multiprocessing extensions and that the CPU is part of
a multiprocessing system.
Cc: <stable@kernel.org> Reported-and-Tested-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
cifs: No need to check crypto blockcipher allocation
Missed one change as per earlier suggestion.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Mon, 31 Jan 2011 12:24:46 +0000 (07:24 -0500)]
cifs: clean up some compiler warnings
New compiler warnings that I noticed when building a patchset based
on recent Fedora kernel:
fs/cifs/cifssmb.c: In function 'CIFSSMBSetFileSize':
fs/cifs/cifssmb.c:4813:8: warning: variable 'data_offset' set but not used
[-Wunused-but-set-variable]
fs/cifs/file.c: In function 'cifs_open':
fs/cifs/file.c:349:24: warning: variable 'pCifsInode' set but not used
[-Wunused-but-set-variable]
fs/cifs/file.c: In function 'cifs_partialpagewrite':
fs/cifs/file.c:1149:23: warning: variable 'cifs_sb' set but not used
[-Wunused-but-set-variable]
fs/cifs/file.c: In function 'cifs_iovec_write':
fs/cifs/file.c:1740:9: warning: passing argument 6 of 'CIFSSMBWrite2' from
incompatible pointer type [enabled by default]
fs/cifs/cifsproto.h:337:12: note: expected 'unsigned int *' but argument is
of type 'size_t *'
fs/cifs/readdir.c: In function 'cifs_readdir':
fs/cifs/readdir.c:767:23: warning: variable 'cifs_sb' set but not used
[-Wunused-but-set-variable]
fs/cifs/cifs_dfs_ref.c: In function 'cifs_dfs_d_automount':
fs/cifs/cifs_dfs_ref.c:342:2: warning: 'rc' may be used uninitialized in
this function [-Wuninitialized]
fs/cifs/cifs_dfs_ref.c:278:6: note: 'rc' was declared here
Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
Jarod Wilson [Thu, 27 Jan 2011 18:08:35 +0000 (15:08 -0300)]
[media] rc/streamzap: fix reporting response times
The streamzap driver has relatively low sampling resolution, and any
delays in reporting events seem to cause some minor problems for the
likes of irw when using the lirc bridge driver, resulting in a single
keypress registering as multiple independent ones, rather than as a
single press with repeats. If we call ir_raw_event_handle() more
frequently and reset the rawir kfifo at end-of-signal, the behavior
improves quite a bit.
Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Make sure rawir struct is zeroed out before populating it for each
ir_raw_event_store_with_filter() call, and when we see a trailing 0x80
packet (end-of-data), issue an ir_raw_event_reset() call.
Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Tue, 18 Jan 2011 20:31:24 +0000 (17:31 -0300)]
[media] rc: use time unit conversion macros correctly
Due to my own stupidity, some of the wrong time unit conversion macros
were being used inside some of the IR drivers I've been working on. Fix
that, and convert over some additional places to also use the macros.
Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Tue, 18 Jan 2011 05:33:08 +0000 (02:33 -0300)]
[media] rc/ir-lirc-codec: add back debug spew
Some occasionally useful debug spew disappeared as part of a feature
update a while back, and I'm finding myself in need of it again to help
diagnose some issues.
Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Thu, 20 Jan 2011 21:31:18 +0000 (18:31 -0300)]
[media] ir-kbd-i2c: improve remote behavior with z8 behind usb
Add the same "are you ready?" i2c_master_send() poll command to
get_key_haup_xvr found in lirc_zilog, which is apparently seen in
the Windows driver for the PVR-150 w/a z8. This stabilizes what is
received from both the HD-PVR and HVR-1950, even with their polling
intervals at the default of 100, thus the removal of the custom
260ms polling_interval in pvrusb2-i2c-core.c.
Acked-by: Andy Walls <awalls@md.metrocast.net> Acked-by: Mike Isely <isely@isely.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Wed, 19 Jan 2011 21:49:19 +0000 (18:49 -0300)]
[media] lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_send
Both the HD-PVR and HVR-1950, driven by the hdpvr and pvrusb2 drivers
respectively, have a zilog z8 chip exposed via i2c. These are both
usb-connected devices, and on both of them, back-to-back i2c_master_send
calls that work fine with a z8 on a pci card fail with a -EIO, as the
chip isn't yet ready from the prior command. To cope with that, add a
delay and retry loop where necessary.
Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Tue, 18 Jan 2011 05:27:45 +0000 (02:27 -0300)]
[media] rc/mce: add mappings for missing keys
Per http://mediacenterguides.com/book/export/html/31 and investigation
by Erin, we were missing these last three mappings to complete the mce
key table. Lets remedy that.
Marcin Slusarz [Fri, 28 Jan 2011 16:00:31 +0000 (11:00 -0500)]
watchdog: Fix broken nowatchdog logic
Passing nowatchdog to kernel disables 2 things: creation of
watchdog threads AND initialization of percpu watchdog_hrtimer.
As hrtimers are initialized only at boot it's not possible to
enable watchdog later - for me all watchdog threads started to
eat 100% of CPU time, but they could just crash.
Additionally, even if these threads would start properly,
watchdog_disable_all_cpus was guarded by no_watchdog check, so
you couldn't disable watchdog.
To fix this, remove no_watchdog variable and use already
existing watchdog_enabled variable.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
[ removed another no_watchdog instance ] Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: <stable@kernel.org>
LKML-Reference: <1296230433-6261-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Russell King [Sun, 30 Jan 2011 11:29:40 +0000 (11:29 +0000)]
ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+
Ensure that the ISA/PCI IO space accessors are properly ordered on
ARMv6+ architectures. These should always be ordered with respect to
all other accesses.
This also fixes __iormb() and __iowmb() not being visible to ioread/
iowrite if a platform defines its own MMIO accessors.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sun, 30 Jan 2011 11:21:05 +0000 (11:21 +0000)]
ARM: initrd: disable initrd if passed address overlaps reserved region
Disable the initrd if the passed address already overlaps the reserved
region. This avoids oopses on Netwinders when NeTTrom tells the kernel
that an initrd is located at mem+4MB, but this overlaps the BSS,
resulting in the kernels in-use BSS being freed.
This should be applied to v2.6.37-stable.
Cc: <stable@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Fri, 28 Jan 2011 20:57:57 +0000 (20:57 +0000)]
ARM: footbridge: fix debug macros
0ea1293 (arm: return both physical and virtual addresses from addruart)
changed the way the 'addruart' worked, making it return both the virt
and phys addresses. Unfortunately, for footbridge, these were reversed.
Fix that. Tested on Netwinder.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Jan Glauber [Mon, 31 Jan 2011 10:30:08 +0000 (11:30 +0100)]
[S390] qdio: prevent compile warning under CONFIG_32BIT
Prevent the following compiler warning if compiling a 31 bit kernel:
drivers/s390/cio/qdio_main.c: In function ‘get_outbound_buffer_frontier’:
drivers/s390/cio/qdio_main.c:646:16: warning: ‘state’ may be used uninitialized in this function
CC lib/radix-tree.o
CC drivers/s390/scsi/zfcp_cfdc.o
drivers/s390/cio/qdio_main.c: In function ‘qdio_inbound_q_moved’:
drivers/s390/cio/qdio_main.c:479:16: warning: ‘state’ may be used uninitialized in this function
drivers/s390/cio/qdio_main.c:479:16: note: ‘state’ was declared here
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Mon, 31 Jan 2011 10:30:06 +0000 (11:30 +0100)]
[S390] tlb: fix build error caused by THP
Fix this build error with !CONFIG_SWAP caused by tranparent huge pages support:
In file included from mm/pgtable-generic.c:9:0:
/linux-2.6/arch/s390/include/asm/tlb.h: In function 'tlb_remove_page':
/linux-2.6/arch/s390/include/asm/tlb.h:92:2: error: implicit declaration of function 'page_cache_release'
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The uaccess functions copy_in_user_std and clear_user_std fail to
switch back from secondary space mode to primary space mode with sacf
in case of an unresolvable page fault. We need to make sure that the
switch back to primary mode is done in all cases, otherwise the code
following the uaccess inline assembly will crash.
Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
After page_table_free_rcu removed a page from the pgtable_list
page_table_free better not add it again. Otherwise a page_table_alloc
can reuse a page table fragment that is still in the rcu process.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Stefan Haberland [Mon, 31 Jan 2011 10:30:03 +0000 (11:30 +0100)]
[S390] dasd: prevent panic with unresumed devices
If a device is not resumed correctly the system crashes when this
device is set offline. This may happen if it gets disconnected
during suspend.
Check if the device is already removed from alias handling and skip
these steps to prevent the kernel panic.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Jeff Layton [Sat, 29 Jan 2011 12:02:28 +0000 (07:02 -0500)]
cifs: force a reconnect if there are too many MIDs in flight
Currently, we allow the pending_mid_q to grow without bound with
SIGKILL'ed processes. This could eventually be a DoS'able problem. An
unprivileged user could a process that does a long-running call and then
SIGKILL it.
If he can also intercept the NT_CANCEL calls or the replies from the
server, then the pending_mid_q could grow very large, possibly even to
2^16 entries which might leave GetNextMid in an infinite loop. Fix this
by imposing a hard limit of 32k calls per server. If we cross that
limit, set the tcpStatus to CifsNeedReconnect to force cifsd to
eventually reconnect the socket and clean out the pending_mid_q.
While we're at it, clean up the function a bit and eliminate an
unnecessary NULL pointer check.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Fri, 28 Jan 2011 20:05:43 +0000 (15:05 -0500)]
cifs: don't pop a printk when sending on a socket is interrupted
If we kill the process while it's sending on a socket then the
kernel_sendmsg will return -EINTR. This is normal. No need to spam the
ring buffer with this info.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Fri, 28 Jan 2011 12:08:28 +0000 (07:08 -0500)]
cifs: send an NT_CANCEL request when a process is signalled
Use the new send_nt_cancel function to send an NT_CANCEL when the
process is delivered a fatal signal. This is a "best effort" enterprise
however, so don't bother to check the return code. There's nothing we
can reasonably do if it fails anyway.
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Fri, 28 Jan 2011 12:08:28 +0000 (07:08 -0500)]
cifs: handle cancelled requests better
Currently, when a request is cancelled via signal, we delete the mid
immediately. If the request was already transmitted however, the client
is still likely to receive a response. When it does, it won't recognize
it however and will pop a printk.
It's also a little dangerous to just delete the mid entry like this. We
may end up reusing that mid. If we do then we could potentially get the
response from the first request confused with the later one.
Prevent the reuse of mids by marking them as cancelled and keeping them
on the pending_mid_q list. If the reply comes in, we'll delete it from
the list then. If it never comes, then we'll delete it at reconnect
or when cifsd comes down.
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Sat, 29 Jan 2011 12:03:02 +0000 (07:03 -0500)]
cifs: fix two compiler warning about uninitialized vars
fs/cifs/link.c: In function ‘symlink_hash’:
fs/cifs/link.c:58:3: warning: ‘rc’ may be used uninitialized in this
function [-Wuninitialized]
fs/cifs/smbencrypt.c: In function ‘mdfour’:
fs/cifs/smbencrypt.c:61:3: warning: ‘rc’ may be used uninitialized in this
function [-Wuninitialized]
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Kacper Kornet [Fri, 28 Jan 2011 23:21:04 +0000 (00:21 +0100)]
Fix prlimit64 for suid/sgid processes
Since check_prlimit_permission always fails in the case of SUID/GUID
processes, such processes are not able to read or set their own limits.
This commit changes this by assuming that process can always read/change
its own limits.
NTFS: Fix invalid pointer dereference in ntfs_mft_record_alloc().
In ntfs_mft_record_alloc() when mapping the new extent mft record with
map_extent_mft_record() we overwrite @m with the return value and on
error, we then try to use the old @m but that is no longer there as @m
now contains an error code instead so we crash when dereferencing the
error code as if it were a pointer.
The simple fix is to use a temporary variable to store the return value
thus preserving the original @m for later use. This is a backport from
the commercial Tuxera-NTFS driver and is well tested...
Thanks go to Julia Lawall for pointing this out (whilst I had fixed it
in the commercial driver I had failed to fix it in the Linux kernel).
Signed-off-by: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 31 Jan 2011 02:55:38 +0000 (12:55 +1000)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm:
kmemleak: Allow kmemleak metadata allocations to fail
kmemleak: remove memset by using kzalloc
Linus Torvalds [Mon, 31 Jan 2011 02:53:12 +0000 (12:53 +1000)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: HDA: Fix automute on Thinkpad L412/L512
ALSA: HDA: Fix dmesg output of HDMI supported bits
ALSA: fix invalid hardware.h include in ac97c for AVR32 architecture
ASoC: correct link specifications for corgi, poodle and spitz
ASoC: Samsung: Fix outdated cpu_dai_name for s3c24xx i2s
ASoC: Fix codec device id format used by some dai_links
ALSA: azt3328 - fix broken AZF_FMT_XLATE macro
ALSA: Xonar, CS43xx: Don't overrun static array
ASoC: Handle low measured DC offsets for wm_hubs devices
ASoC: da8xx/omap-l1xx: match codec_name with i2c ids
ASoC: WM8994: fix wrong value in tristate function
ASoC: WM8995: Fix incorrect use of snd_soc_update_bits()
projects / mirror_ubuntu-kernels.git / log