entry: Explicitly flush pending rcuog wakeup before last rescheduling point
Following the idle loop model, cleanly check for pending rcuog wakeup
before the last rescheduling point on resuming to user mode. This
way we can avoid to do it from rcu_user_enter() with the last resort
self-IPI hack that enforces rescheduling.
rcu/nocb: Trigger self-IPI on late deferred wake up before user resume
Entering RCU idle mode may cause a deferred wake up of an RCU NOCB_GP
kthread (rcuog) to be serviced.
Unfortunately the call to rcu_user_enter() is already past the last
rescheduling opportunity before we resume to userspace or to guest mode.
We may escape there with the woken task ignored.
The ultimate resort to fix every callsites is to trigger a self-IPI
(nohz_full depends on arch to implement arch_irq_work_raise()) that will
trigger a reschedule on IRQ tail or guest exit.
Eventually every site that want a saner treatment will need to carefully
place a call to rcu_nocb_flush_deferred_wakeup() before the last explicit
need_resched() check upon resume.
Fixes: 96d3fd0d315a (rcu: Break call_rcu() deadlock involving scheduler and perf) Reported-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210131230548.32970-4-frederic@kernel.org
rcu/nocb: Perform deferred wake up before last idle's need_resched() check
Entering RCU idle mode may cause a deferred wake up of an RCU NOCB_GP
kthread (rcuog) to be serviced.
Usually a local wake up happening while running the idle task is handled
in one of the need_resched() checks carefully placed within the idle
loop that can break to the scheduler.
Unfortunately the call to rcu_idle_enter() is already beyond the last
generic need_resched() check and we may halt the CPU with a resched
request unhandled, leaving the task hanging.
Fix this with splitting the rcuog wakeup handling from rcu_idle_enter()
and place it before the last generic need_resched() check in the idle
loop. It is then assumed that no call to call_rcu() will be performed
after that in the idle loop until the CPU is put in low power mode.
Fixes: 96d3fd0d315a (rcu: Break call_rcu() deadlock involving scheduler and perf) Reported-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210131230548.32970-3-frederic@kernel.org
rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers
Deferred wakeup of rcuog kthreads upon RCU idle mode entry is going to
be handled differently whether initiated by idle, user or guest. Prepare
with pulling that control up to rcu_eqs_enter() callers.
Juri Lelli [Mon, 8 Feb 2021 07:35:54 +0000 (08:35 +0100)]
sched/features: Distinguish between NORMAL and DEADLINE hrtick
The HRTICK feature has traditionally been servicing configurations that
need precise preemptions point for NORMAL tasks. More recently, the
feature has been extended to also service DEADLINE tasks with stringent
runtime enforcement needs (e.g., runtime < 1ms with HZ=1000).
Enabling HRTICK sched feature currently enables the additional timer and
task tick for both classes, which might introduced undesired overhead
for no additional benefit if one needed it only for one of the cases.
Separate HRTICK sched feature in two (and leave the traditional case
name unmodified) so that it can be selectively enabled when needed.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210208073554.14629-3-juri.lelli@redhat.com
Juri Lelli [Mon, 8 Feb 2021 07:35:53 +0000 (08:35 +0100)]
sched/features: Fix hrtick reprogramming
Hung tasks and RCU stall cases were reported on systems which were not
100% busy. Investigation of such unexpected cases (no sign of potential
starvation caused by tasks hogging the system) pointed out that the
periodic sched tick timer wasn't serviced anymore after a certain point
and that caused all machinery that depends on it (timers, RCU, etc.) to
stop working as well. This issues was however only reproducible if
HRTICK was enabled.
Looking at core dumps it was found that the rbtree of the hrtimer base
used also for the hrtick was corrupted (i.e. next as seen from the base
root and actual leftmost obtained by traversing the tree are different).
Same base is also used for periodic tick hrtimer, which might get "lost"
if the rbtree gets corrupted.
Much alike what described in commit 1f71addd34f4c ("tick/sched: Do not
mess with an enqueued hrtimer") there is a race window between
hrtimer_set_expires() in hrtick_start and hrtimer_start_expires() in
__hrtick_restart() in which the former might be operating on an already
queued hrtick hrtimer, which might lead to corruption of the base.
Use hrtick_start() (which removes the timer before enqueuing it back) to
ensure hrtick hrtimer reprogramming is entirely guarded by the base
lock, so that no race conditions can occur.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210208073554.14629-2-juri.lelli@redhat.com
Dietmar Eggemann [Tue, 19 Jan 2021 08:35:42 +0000 (09:35 +0100)]
sched/deadline: Reduce rq lock contention in dl_add_task_root_domain()
dl_add_task_root_domain() is called during sched domain rebuild:
rebuild_sched_domains_locked()
partition_and_rebuild_sched_domains()
rebuild_root_domains()
for all top_cpuset descendants:
update_tasks_root_domain()
for all tasks of cpuset:
dl_add_task_root_domain()
Change it so that only the task pi lock is taken to check if the task
has a SCHED_DEADLINE (DL) policy. In case that p is a DL task take the
rq lock as well to be able to safely de-reference root domain's DL
bandwidth structure.
Most of the tasks will have another policy (namely SCHED_NORMAL) and
can now bail without taking the rq lock.
One thing to note here: Even in case that there aren't any DL user
tasks, a slow frequency switching system with cpufreq gov schedutil has
a DL task (sugov) per frequency domain running which participates in DL
bandwidth management.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Quentin Perret <qperret@google.com> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by: Juri Lelli <juri.lelli@redhat.com> Link: https://lkml.kernel.org/r/20210119083542.19856-1-dietmar.eggemann@arm.com
smp: Process pending softirqs in flush_smp_call_function_from_idle()
send_call_function_single_ipi() may wake an idle CPU without sending an
IPI. The woken up CPU will process the SMP-functions in
flush_smp_call_function_from_idle(). Any raised softirq from within the
SMP-function call will not be processed.
Should the CPU have no tasks assigned, then it will go back to idle with
pending softirqs and the NOHZ will rightfully complain.
Process pending softirqs on return from flush_smp_call_function_queue().
Fixes: b2a02fc43a1f4 ("smp: Optimize send_call_function_single_ipi()") Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210123201027.3262800-2-bigeasy@linutronix.de
Peter Zijlstra [Mon, 25 Jan 2021 15:26:50 +0000 (16:26 +0100)]
sched: Harden PREEMPT_DYNAMIC
Use the new EXPORT_STATIC_CALL_TRAMP() / static_call_mod() to unexport
the static_call_key for the PREEMPT_DYNAMIC calls such that modules
can no longer update these calls.
Having modules change/hi-jack the preemption calls would be horrible.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Wed, 27 Jan 2021 23:18:37 +0000 (17:18 -0600)]
static_call: Allow module use without exposing static_call_key
When exporting static_call_key; with EXPORT_STATIC_CALL*(), the module
can use static_call_update() to change the function called. This is
not desirable in general.
Not exporting static_call_key however also disallows usage of
static_call(), since objtool needs the key to construct the
static_call_site.
Solve this by allowing objtool to create the static_call_site using
the trampoline address when it builds a module and cannot find the
static_call_key symbol. The module loader will then try and map the
trampole back to a key before it constructs the normal sites list.
Doing this requires a trampoline -> key associsation, so add another
magic section that keeps those.
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210127231837.ifddpn7rhwdaepiu@treble
preempt/dynamic: Provide preempt_schedule[_notrace]() static calls
Provide static calls to control preempt_schedule[_notrace]()
(called in CONFIG_PREEMPT) so that we can override their behaviour when
preempt= is overriden.
Since the default behaviour is full preemption, both their calls are
initialized to the arch provided wrapper, if any.
[fweisbec: only define static calls when PREEMPT_DYNAMIC, make it less
dependent on x86 with __preempt_schedule_func] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-7-frederic@kernel.org
preempt/dynamic: Provide cond_resched() and might_resched() static calls
Provide static calls to control cond_resched() (called in !CONFIG_PREEMPT)
and might_resched() (called in CONFIG_PREEMPT_VOLUNTARY) to that we
can override their behaviour when preempt= is overriden.
Since the default behaviour is full preemption, both their calls are
ignored when preempt= isn't passed.
[fweisbec: branch might_resched() directly to __cond_resched(), only
define static calls when PREEMPT_DYNAMIC]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-6-frederic@kernel.org
Michal Hocko [Mon, 18 Jan 2021 14:12:19 +0000 (15:12 +0100)]
preempt: Introduce CONFIG_PREEMPT_DYNAMIC
Preemption mode selection is currently hardcoded on Kconfig choices.
Introduce a dedicated option to tune preemption flavour at boot time,
This will be only available on architectures efficiently supporting
static calls in order not to tempt with the feature against additional
overhead that might be prohibitive or undesirable.
CONFIG_PREEMPT_DYNAMIC is automatically selected by CONFIG_PREEMPT if
the architecture provides the necessary support (CONFIG_STATIC_CALL_INLINE,
CONFIG_GENERIC_ENTRY, and provide with __preempt_schedule_function() /
__preempt_schedule_notrace_function()).
Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
[peterz: relax requirement to HAVE_STATIC_CALL] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-5-frederic@kernel.org
DECLARE_STATIC_CALL() must pass the original function targeted for a
given static call. But DEFINE_STATIC_CALL() may want to initialize it as
off. In this case we can't pass NULL (for functions without return value)
or __static_call_return0 (for functions returning a value) directly
to DEFINE_STATIC_CALL() as that may trigger a static call redeclaration
with a different function prototype. Type casts neither can work around
that as they don't get along with typeof().
The proper way to do that for functions that don't return a value is
to use DEFINE_STATIC_CALL_NULL(). But functions returning a actual value
don't have an equivalent yet.
Provide DEFINE_STATIC_CALL_RET0() to solve this situation.
Peter Zijlstra [Mon, 18 Jan 2021 14:12:16 +0000 (15:12 +0100)]
static_call/x86: Add __static_call_return0()
Provide a stub function that return 0 and wire up the static call site
patching to replace the CALL with a single 5 byte instruction that
clears %RAX, the return value register.
The function can be cast to any function pointer type that has a
single %RAX return (including pointers). Also provide a version that
returns an int for convenience. We are clearing the entire %RAX register
in any case, whether the return value is 32 or 64 bits, since %RAX is
always a scratch register anyway.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-2-frederic@kernel.org
Peter Zijlstra [Mon, 18 Jan 2021 14:12:18 +0000 (15:12 +0100)]
static_call: Pull some static_call declarations to the type headers
Some static call declarations are going to be needed on low level header
files. Move the necessary material to the dedicated static call types
header to avoid inclusion dependency hell.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-4-frederic@kernel.org
Dietmar Eggemann [Thu, 28 Jan 2021 13:10:40 +0000 (14:10 +0100)]
sched/core: Update task_prio() function header
The description of the RT offset and the values for 'normal' tasks needs
update. Moreover there are DL tasks now.
task_prio() has to stay like it is to guarantee compatibility with the
/proc/<pid>/stat priority field:
Dietmar Eggemann [Thu, 28 Jan 2021 13:10:39 +0000 (14:10 +0100)]
sched: Remove USER_PRIO, TASK_USER_PRIO and MAX_USER_PRIO
The only remaining use of MAX_USER_PRIO (and USER_PRIO) is the
SCALE_PRIO() definition in the PowerPC Cell architecture's Synergistic
Processor Unit (SPU) scheduler. TASK_USER_PRIO isn't used anymore.
Commit fe443ef2ac42 ("[POWERPC] spusched: Dynamic timeslicing for
SCHED_OTHER") copied SCALE_PRIO() from the task scheduler in v2.6.23.
Commit a4ec24b48dde ("sched: tidy up SCHED_RR") removed it from the task
scheduler in v2.6.24.
Commit 3ee237dddcd8 ("sched/prio: Add 3 macros of MAX_NICE, MIN_NICE and
NICE_WIDTH in prio.h") introduced NICE_WIDTH much later.
Dietmar Eggemann [Thu, 28 Jan 2021 13:10:38 +0000 (14:10 +0100)]
sched: Remove MAX_USER_RT_PRIO
Commit d46523ea32a7 ("[PATCH] fix MAX_USER_RT_PRIO and MAX_RT_PRIO")
was introduced due to a a small time period in which the realtime patch
set was using different values for MAX_USER_RT_PRIO and MAX_RT_PRIO.
This is no longer true, i.e. now MAX_RT_PRIO == MAX_USER_RT_PRIO.
Get rid of MAX_USER_RT_PRIO and make everything use MAX_RT_PRIO
instead.
sched/topology: Fix sched_domain_topology_level alloc in sched_init_numa()
Commit "sched/topology: Make sched_init_numa() use a set for the
deduplicating sort" allocates 'i + nr_levels (level)' instead of
'i + nr_levels + 1' sched_domain_topology_level.
This led to an Oops (on Arm64 juno with CONFIG_SCHED_DEBUG):
Peter Zijlstra [Wed, 29 Apr 2020 15:05:15 +0000 (17:05 +0200)]
rbtree, perf: Use new rbtree helpers
Reduce rbtree boiler plate by using the new helpers.
One noteworthy change is unification of the various (partial) compare
functions. We construct a subtree match by forcing the sub-order to
always match, see __group_cmp().
Peter Zijlstra [Wed, 29 Apr 2020 15:03:22 +0000 (17:03 +0200)]
rbtree: Add generic add and find helpers
I've always been bothered by the endless (fragile) boilerplate for
rbtree, and I recently wrote some rbtree helpers for objtool and
figured I should lift them into the kernel and use them more widely.
Provide:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
Inlining and constant propagation should see the compiler inline the
whole thing, including the various compare functions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Michel Lespinasse <walken@google.com> Acked-by: Davidlohr Bueso <dbueso@suse.de>
Mel Gorman [Wed, 27 Jan 2021 13:52:03 +0000 (13:52 +0000)]
sched/fair: Merge select_idle_core/cpu()
Both select_idle_core() and select_idle_cpu() do a loop over the same
cpumask. Observe that by clearing the already visited CPUs, we can
fold the iteration and iterate a core at a time.
All we need to do is remember any non-idle CPU we encountered while
scanning for an idle core. This way we'll only iterate every CPU once.
Linus Torvalds [Sun, 14 Feb 2021 19:36:32 +0000 (11:36 -0800)]
Merge tag 'kbuild-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64
- Use pkg-config for scripts/sign-file.c CFLAGS
* tag 'kbuild-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts: set proper OpenSSL include dir also for sign-file
sparc: remove wrong comment from arch/sparc/include/asm/Kbuild
kbuild: fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64
Linus Torvalds [Sun, 14 Feb 2021 19:10:55 +0000 (11:10 -0800)]
Merge tag 'x86_urgent_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"I kinda knew while typing 'I hope this is the last batch of x86/urgent
updates' last week, Murphy was reading too and uttered 'Hold my
beer!'.
So here's more fixes... Thanks Murphy.
Anyway, three more x86/urgent fixes for 5.11 final. We should be
finally ready (famous last words). :-)
- An SGX use after free fix
- A fix for the fix to disable CET instrumentation generation for
kernel code. We forgot 32-bit, which we seem to do very often
nowadays
- A Xen PV fix to irqdomain init ordering"
* tag 'x86_urgent_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pci: Create PCI/MSI irqdomain after x86_init.pci.arch_init()
x86/build: Disable CET instrumentation in the kernel for 32-bit too
x86/sgx: Maintain encl->refcount for each encl->mm_list entry
Arnd Bergmann [Thu, 4 Feb 2021 15:39:44 +0000 (16:39 +0100)]
leds: rt8515: add V4L2_FLASH_LED_CLASS dependency
The leds-rt8515 driver can optionall use the v4l2 flash led class,
but it causes a link error when that class is in a loadable module
and the rt8515 driver itself is built-in:
ld.lld: error: undefined symbol: v4l2_flash_init
>>> referenced by leds-rt8515.c
>>> leds/flash/leds-rt8515.o:(rt8515_probe) in archive
drivers/built-in.a
Adding 'depends on V4L2_FLASH_LED_CLASS' in Kconfig would avoid that,
but it would make it impossible to use the driver without the
v4l2 support.
Add the same dependency that the other users of this class have
instead, which just prevents the broken configuration.
Linus Torvalds [Sat, 13 Feb 2021 20:04:18 +0000 (12:04 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge fixes from Andrew Morton:
"6 patches.
Subsystems affected by this patch series: mm/pagemap, scripts,
MAINTAINERS, and h8300"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
h8300: fix PREEMPTION build, TI_PRE_COUNT undefined
MAINTAINERS: add Andrey Konovalov to KASAN reviewers
MAINTAINERS: update Andrey Konovalov's email address
MAINTAINERS: update KASAN file list
scripts/recordmcount.pl: support big endian for ARCH sh
m68k: make __pfn_to_phys() and __phys_to_pfn() available for !MMU
Linus Torvalds [Sat, 13 Feb 2021 19:55:29 +0000 (11:55 -0800)]
Merge tag 'for-5.11-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A regression fix caused by a refactoring in 5.11.
A corrupted superblock wouldn't be detected by checksum verification
due to wrongly placed initialization of the checksum length, thus
making memcmp always work"
* tag 'for-5.11-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: initialize fs_info::csum_size earlier in open_ctree
Rong Chen [Sat, 13 Feb 2021 04:52:41 +0000 (20:52 -0800)]
scripts/recordmcount.pl: support big endian for ARCH sh
The kernel test robot reported the following issue:
CC [M] drivers/soc/litex/litex_soc_ctrl.o
sh4-linux-objcopy: Unable to change endianness of input file(s)
sh4-linux-ld: cannot find drivers/soc/litex/.tmp_gl_litex_soc_ctrl.o: No such file or directory
sh4-linux-objcopy: 'drivers/soc/litex/.tmp_mx_litex_soc_ctrl.o': No such file
The problem is that the format of input file is elf32-shbig-linux, but
sh4-linux-objcopy wants to output a file which format is elf32-sh-linux:
$ sh4-linux-objdump -d drivers/soc/litex/litex_soc_ctrl.o | grep format
drivers/soc/litex/litex_soc_ctrl.o: file format elf32-shbig-linux
Mike Rapoport [Sat, 13 Feb 2021 04:52:38 +0000 (20:52 -0800)]
m68k: make __pfn_to_phys() and __phys_to_pfn() available for !MMU
Recent changes that obsoleted DISCONTIGMEM on m68k switched the MMU
variant to use generic definitions of __pfn_to_phys() and __phys_to_pfn(),
but missed the !MMU variant which caused a build failure:
drivers/media/common/videobuf2/videobuf2-dma-contig.c: In function 'vb2_dc_get_userptr':
drivers/media/common/videobuf2/videobuf2-dma-contig.c:509:5: error: implicit declaration of function '__pfn_to_phys' [-Werror=implicit-function-declaration]
509 | __pfn_to_phys(nums[0]), size, buf->dma_dir, 0);
| ^~~~~~~~~~~~~
cc1: some warnings being treated as errors
Enable __pfn_to_phys() and __phys_to_pfn() on !MMU builds.
Link: https://lkml.kernel.org/r/20210211232202.GS299309@linux.ibm.com Fixes: 4bfc848e0981 ("m68k/mm: enable use of generic memory_model.h for !DISCONTIGMEM") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 12 Feb 2021 22:45:39 +0000 (14:45 -0800)]
Merge tag '5.11-rc7-smb3-github' of git://github.com/smfrench/smb3-kernel
Pull cifs fixes from Steve French:
"Four small smb3 fixes to the new mount API (including a particularly
important one for DFS links).
These were found in testing this week of additional DFS scenarios, and
a user testing of an apache container problem"
* tag '5.11-rc7-smb3-github' of git://github.com/smfrench/smb3-kernel:
cifs: Set CIFS_MOUNT_USE_PREFIX_PATH flag on setting cifs_sb->prepath.
cifs: In the new mount api we get the full devname as source=
cifs: do not disable noperm if multiuser mount option is not provided
cifs: fix dfs-links
Linus Torvalds [Fri, 12 Feb 2021 19:29:06 +0000 (11:29 -0800)]
Merge tag 'drm-fixes-2021-02-12' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular fixes for final, there is a ttm regression fix, dp-mst fix,
one amdgpu revert, two i915 fixes, and some misc fixes for sun4i,
xlnx, and vc4.
All pretty quiet and don't think we have any known outstanding
regressions.
ttm:
- page pool regression fix.
dp_mst:
- don't report un-attached ports as connected
amdgpu:
- blank screen fix
i915:
- ensure Type-C FIA is powered when initializing
- fix overlay frontbuffer tracking
sun4i:
- tcon1 sync polarity fix
- always set HDMI clock rate
- fix H6 HDMI PHY config
- fix H6 max frequency
vc4:
- fix buffer overflow
xlnx:
- fix memory leak"
* tag 'drm-fixes-2021-02-12' of git://anongit.freedesktop.org/drm/drm:
drm/ttm: make sure pool pages are cleared
drm/sun4i: dw-hdmi: Fix max. frequency for H6
drm/sun4i: Fix H6 HDMI PHY configuration
drm/sun4i: dw-hdmi: always set clock rate
drm/sun4i: tcon: set sync polarity for tcon1 channel
drm/i915: Fix overlay frontbuffer tracking
Revert "drm/amd/display: Update NV1x SR latency values"
drm/i915/tgl+: Make sure TypeC FIA is powered up when initializing it
drm/dp_mst: Don't report ports connected if nothing is attached to them
drm/xlnx: fix kmemleak by sending vblank_event in atomic_disable
drm/vc4: hvs: Fix buffer overflow with the dlist handling
Linus Torvalds [Fri, 12 Feb 2021 19:16:17 +0000 (11:16 -0800)]
Merge tag 'trace-v5.11-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix buffer overflow in trace event filter.
It was reported that if an trace event was larger than a page and was
filtered, that it caused memory corruption. The reason is that
filtered events first go into a buffer to test the filter before being
written into the ring buffer. Unfortunately, this write did not check
the size"
* tag 'trace-v5.11-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Check length before giving out the filter buffer
Linus Torvalds [Fri, 12 Feb 2021 19:12:58 +0000 (11:12 -0800)]
Merge tag 'for-linus-5.11-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A single fix for an issue introduced this development cycle: when
running as a Xen guest on Arm systems the kernel will hang during
boot"
* tag 'for-linus-5.11-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: Don't probe xenbus as part of an early initcall
Linus Torvalds [Fri, 12 Feb 2021 19:07:29 +0000 (11:07 -0800)]
Merge tag 'riscv-for-linus-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"A single fix this week: the removal of the GPIO reset method for the
Ethernet phy on the HiFive Unleashed.
This returns to relying on the bootloader's phy reset sequence, which
we'll have to continue doing until we can sort out how to get the
Linux phy driver to perform the special reset dance required for this
phy"
* tag 'riscv-for-linus-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Revert "dts: phy: add GPIO number and active state used for phy reset"
Catalin Marinas [Wed, 10 Feb 2021 18:03:16 +0000 (18:03 +0000)]
arm64: mte: Allow PTRACE_PEEKMTETAGS access to the zero page
The ptrace(PTRACE_PEEKMTETAGS) implementation checks whether the user
page has valid tags (mapped with PROT_MTE) by testing the PG_mte_tagged
page flag. If this bit is cleared, ptrace(PTRACE_PEEKMTETAGS) returns
-EIO.
A newly created (PROT_MTE) mapping points to the zero page which had its
tags zeroed during cpu_enable_mte(). If there were no prior writes to
this mapping, ptrace(PTRACE_PEEKMTETAGS) fails with -EIO since the zero
page does not have the PG_mte_tagged flag set.
Set PG_mte_tagged on the zero page when its tags are cleared during
boot. In addition, to avoid ptrace(PTRACE_PEEKMTETAGS) succeeding on
!PROT_MTE mappings pointing to the zero page, change the
__access_remote_tags() check to (vm_flags & VM_MTE) instead of
PG_mte_tagged.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: 34bfeea4a9e9 ("arm64: mte: Clear the tags when a page is mapped in user-space with PROT_MTE") Cc: <stable@vger.kernel.org> # 5.10.x Cc: Will Deacon <will@kernel.org> Reported-by: Luis Machado <luis.machado@linaro.org> Tested-by: Luis Machado <luis.machado@linaro.org> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lore.kernel.org/r/20210210180316.23654-1-catalin.marinas@arm.com
Su Yue [Thu, 11 Feb 2021 08:38:28 +0000 (16:38 +0800)]
btrfs: initialize fs_info::csum_size earlier in open_ctree
User reported that btrfs-progs misc-tests/028-superblock-recover fails:
[TEST/misc] 028-superblock-recover
unexpected success: mounted fs with corrupted superblock
test failed for case 028-superblock-recover
The test case expects that a broken image with bad superblock will be
rejected to be mounted. However, the test image just passed csum check
of superblock and was successfully mounted.
Commit 55fc29bed8dd ("btrfs: use cached value of fs_info::csum_size
everywhere") replaces all calls to btrfs_super_csum_size by
fs_info::csum_size. The calls include the place where fs_info->csum_size
is not initialized. So btrfs_check_super_csum() passes because memcmp()
with len 0 always returns 0.
Fix it by caching csum size in btrfs_fs_info::csum_size once we know the
csum type in superblock is valid in open_ctree().
Link: https://github.com/kdave/btrfs-progs/issues/250 Fixes: 55fc29bed8dd ("btrfs: use cached value of fs_info::csum_size everywhere") Signed-off-by: Su Yue <l@damenly.su> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Alain Volmat [Fri, 5 Feb 2021 08:51:40 +0000 (09:51 +0100)]
i2c: stm32f7: fix configuration of the digital filter
The digital filter related computation are present in the driver
however the programming of the filter within the IP is missing.
The maximum value for the DNF is wrong and should be 15 instead of 16.
Linus Torvalds [Thu, 11 Feb 2021 23:41:07 +0000 (15:41 -0800)]
Merge tag 'powerpc-5.11-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a regression seen in io_uring, introduced by our support
for KUAP (Kernel User Access Prevention) with the Hash MMU.
Thanks to Aneesh Kumar K.V, and Zorro Lang"
* tag 'powerpc-5.11-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kuap: Allow kernel thread to access userspace after kthread_use_mm
tracing: Check length before giving out the filter buffer
When filters are used by trace events, a page is allocated on each CPU and
used to copy the trace event fields to this page before writing to the ring
buffer. The reason to use the filter and not write directly into the ring
buffer is because a filter may discard the event and there's more overhead
on discarding from the ring buffer than the extra copy.
The problem here is that there is no check against the size being allocated
when using this page. If an event asks for more than a page size while being
filtered, it will get only a page, leading to the caller writing more that
what was allocated.
Check the length of the request, and if it is more than PAGE_SIZE minus the
header default back to allocating from the ring buffer directly. The ring
buffer may reject the event if its too big anyway, but it wont overflow.
Linus Torvalds [Thu, 11 Feb 2021 19:21:08 +0000 (11:21 -0800)]
Merge tag 'gpio-fixes-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"This is hopefully the last batch of fixes for this release cycle. We
have a minor fix for a Kconfig regression as well as fixes for older
bugs in gpio-ep93xx:
- don't build gpio-mxs unconditionally with COMPILE_TEST enabled
- fix two problems with interrupt handling in gpio-ep93xx"
* tag 'gpio-fixes-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: ep93xx: Fix single irqchip with multi gpiochips
gpio: ep93xx: fix BUG_ON port F usage
gpio: mxs: GPIO_MXS should not default to y unconditionally
Masahiro Yamada [Thu, 11 Feb 2021 06:14:16 +0000 (15:14 +0900)]
kbuild: fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64
Stephen Rothwell reported a build error on ppc64 when
CONFIG_TRIM_UNUSED_KSYMS is enabled.
Jessica Yu pointed out the cause of the error with the reference to the
ppc64 ELF ABI:
"Symbol names with a dot (.) prefix are reserved for holding entry
point addresses. The value of a symbol named ".FN", if it exists,
is the entry point of the function "FN".
As it turned out, CONFIG_TRIM_UNUSED_KSYMS has never worked for ppc64,
but this issue has been unnoticed until recently because this option
depends on !UNUSED_SYMBOLS hence is disabled by all{mod,yes}config.
(Then, it was uncovered by another patch removing UNUSED_SYMBOLS.)
Removing the dot prefix in scripts/gen_autoksyms.sh fixes the issue.
Please note it must be done before 'sort -u' because modules have
both ._mcount and _mcount undefined when CONFIG_FUNCTION_TRACER=y.
Shyam Prasad N [Thu, 11 Feb 2021 11:26:54 +0000 (03:26 -0800)]
cifs: Set CIFS_MOUNT_USE_PREFIX_PATH flag on setting cifs_sb->prepath.
While debugging another issue today, Steve and I noticed that if a
subdir for a file share is already mounted on the client, any new
mount of any other subdir (or the file share root) of the same share
results in sharing the cifs superblock, which e.g. can result in
incorrect device name.
While setting prefix path for the root of a cifs_sb,
CIFS_MOUNT_USE_PREFIX_PATH flag should also be set.
Without it, prepath is not even considered in some places,
and output of "mount" and various /proc/<>/*mount* related
options can be missing part of the device name.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Ronnie Sahlberg [Thu, 11 Feb 2021 06:06:16 +0000 (16:06 +1000)]
cifs: In the new mount api we get the full devname as source=
so we no longer need to handle or parse the UNC= and prefixpath=
options that mount.cifs are generating.
This also fixes a bug in the mount command option where the devname
would be truncated into just //server/share because we were looking
at the truncated UNC value and not the full path.
I.e. in the mount command output the devive //server/share/path
would show up as just //server/share
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Julien Grall [Wed, 10 Feb 2021 17:06:54 +0000 (17:06 +0000)]
arm/xen: Don't probe xenbus as part of an early initcall
After Commit 3499ba8198cad ("xen: Fix event channel callback via
INTX/GSI"), xenbus_probe() will be called too early on Arm. This will
recent to a guest hang during boot.
If the hang wasn't there, we would have ended up to call
xenbus_probe() twice (the second time is in xenbus_probe_initcall()).
We don't need to initialize xenbus_probe() early for Arm guest.
Therefore, the call in xen_guest_init() is now removed.
After this change, there is no more external caller for xenbus_probe().
So the function is turned to a static one. Interestingly there were two
prototypes for it.
Cc: stable@vger.kernel.org Fixes: 3499ba8198cad ("xen: Fix event channel callback via INTX/GSI") Reported-by: Ian Jackson <iwj@xenproject.org> Signed-off-by: Julien Grall <jgrall@amazon.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20210210170654.5377-1-julien@xen.org Signed-off-by: Juergen Gross <jgross@suse.com>
Palmer Dabbelt [Fri, 5 Feb 2021 03:41:12 +0000 (19:41 -0800)]
Revert "dts: phy: add GPIO number and active state used for phy reset"
VSC8541 phys need a special reset sequence, which the driver doesn't
currentlny support. As a result enabling the reset via GPIO essentially
guarnteees that the device won't work correctly. We've been relying on
bootloaders to reset the device for years, with this revert we'll go
back to doing so until we can sort out how to get the reset sequence
into the kernel.
Fixes: a0fa9d727043 ("dts: phy: add GPIO number and active state used for phy reset") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Linus Torvalds [Wed, 10 Feb 2021 20:03:35 +0000 (12:03 -0800)]
Merge tag 'pm-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Address a performance regression related to scale-invariance on x86
that may prevent turbo CPU frequencies from being used in certain
workloads on systems using acpi-cpufreq as the CPU performance scaling
driver and schedutil as the scaling governor"
* tag 'pm-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: ACPI: Update arch scale-invariance max perf ratio if CPPC is not there
cpufreq: ACPI: Extend frequency tables to cover boost frequencies
Linus Torvalds [Wed, 10 Feb 2021 19:58:21 +0000 (11:58 -0800)]
Merge tag 'acpi-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a problematic ACPICA commit that changed the code to attempt to
update memory regions which may be read-only on some systems (Ard
Biesheuvel)"
* tag 'acpi-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPICA: Interpreter: fix memory leak by using existing buffer"
Petr reports that with this commit in place, io_uring fails the chroot
test (CVE-202-29373). We do need to retain ->fs for send/recvmsg, so
revert this commit.
Reported-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull networking fixes from David Miller:
"Another pile of networing fixes:
1) ath9k build error fix from Arnd Bergmann
2) dma memory leak fix in mediatec driver from Lorenzo Bianconi.
3) bpf int3 kprobe fix from Alexei Starovoitov.
4) bpf stackmap integer overflow fix from Bui Quang Minh.
5) Add usb device ids for Cinterion MV31 to qmi_qwwan driver, from
Christoph Schemmel.
6) Don't update deleted entry in xt_recent netfilter module, from
Jazsef Kadlecsik.
7) Use after free in nftables, fix from Pablo Neira Ayuso.
8) Header checksum fix in flowtable from Sven Auhagen.
9) Validate user controlled length in qrtr code, from Sabyrzhan
Tasbolatov.
10) Fix race in xen/netback, from Juergen Gross,
11) New device ID in cxgb4, from Raju Rangoju.
12) Fix ring locking in rxrpc release call, from David Howells.
13) Don't return LAPB error codes from x25_open(), from Xie He.
14) Missing error returns in gsi_channel_setup() from Alex Elder.
15) Get skb_copy_and_csum_datagram working properly with odd segment
sizes, from Willem de Bruijn.
16) Missing RFS/RSS table init in enetc driver, from Vladimir Oltean.
17) Do teardown on probe failure in DSA, from Vladimir Oltean.
18) Fix compilation failures of txtimestamp selftest, from Vadim
Fedorenko.
19) Limit rx per-napi gro queue size to fix latency regression, from
Eric Dumazet.
20) dpaa_eth xdp fixes from Camelia Groza.
21) Missing txq mode update when switching CBS off, in stmmac driver,
from Mohammad Athari Bin Ismail.
22) Failover pending logic fix in ibmvnic driver, from Sukadev
Bhattiprolu.
23) Null deref fix in vmw_vsock, from Norbert Slusarek.
24) Missing verdict update in xdp paths of ena driver, from Shay
Agroskin.
25) seq_file iteration fix in sctp from Neil Brown.
26) bpf 32-bit src register truncation fix on div/mod, from Daniel
Borkmann.
27) Fix jmp32 pruning in bpf verifier, from Daniel Borkmann.
28) Fix locking in vsock_shutdown(), from Stefano Garzarella.
29) Various missing index bound checks in hns3 driver, from Yufeng Mo.
30) Flush ports on .phylink_mac_link_down() in dsa felix driver, from
Vladimir Oltean.
31) Don't mix up stp and mrp port states in bridge layer, from Horatiu
Vultur.
32) Fix locking during netif_tx_disable(), from Edwin Peer"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
bpf: Fix 32 bit src register truncation on div/mod
bpf: Fix verifier jmp32 pruning decision logic
bpf: Fix verifier jsgt branch analysis on max bound
vsock: fix locking in vsock_shutdown()
net: hns3: add a check for index in hclge_get_rss_key()
net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx()
net: hns3: add a check for queue_id in hclge_reset_vf_queue()
net: dsa: felix: implement port flushing on .phylink_mac_link_down
switchdev: mrp: Remove SWITCHDEV_ATTR_ID_MRP_PORT_STAT
bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_state
net: watchdog: hold device global xmit lock during tx disable
netfilter: nftables: relax check for stateful expressions in set definition
netfilter: conntrack: skip identical origin tuple in same zone only
vsock/virtio: update credit only if socket is not closed
net: fix iteration for sctp transport seq_files
net: ena: Update XDP verdict upon failure
net/vmw_vsock: improve locking in vsock_connect_timeout()
net/vmw_vsock: fix NULL pointer dereference
ibmvnic: Clear failover_pending if unable to schedule
net: stmmac: set TxQ mode back to DCB after disabling CBS
...
Linus Torvalds [Wed, 10 Feb 2021 19:22:41 +0000 (11:22 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"14 patches.
Subsystems affected by this patch series: mm (kasan, mremap, tmpfs,
selftests, memcg, and slub), MAINTAINERS, squashfs, nilfs2, and
firmware"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
nilfs2: make splice write available again
mm, slub: better heuristic for number of cpus when calculating slab order
Revert "mm: memcontrol: avoid workload stalls when lowering memory.high"
MAINTAINERS: update Andrey Ryabinin's email address
selftests/vm: rename file run_vmtests to run_vmtests.sh
tmpfs: disallow CONFIG_TMPFS_INODE64 on alpha
tmpfs: disallow CONFIG_TMPFS_INODE64 on s390
mm/mremap: fix BUILD_BUG_ON() error in get_extent
firmware_loader: align .builtin_fw to 8
kasan: fix stack traces dependency for HW_TAGS
squashfs: add more sanity checks in xattr id lookup
squashfs: add more sanity checks in inode lookup
squashfs: add more sanity checks in id lookup
squashfs: avoid out of bounds writes in decompressors
Joachim Henke [Tue, 9 Feb 2021 21:42:36 +0000 (13:42 -0800)]
nilfs2: make splice write available again
Since 5.10, splice() or sendfile() to NILFS2 return EINVAL. This was
caused by commit 36e2c7421f02 ("fs: don't allow splice read/write
without explicit ops").
This patch initializes the splice_write field in file_operations, like
most file systems do, to restore the functionality.
Vlastimil Babka [Tue, 9 Feb 2021 21:42:32 +0000 (13:42 -0800)]
mm, slub: better heuristic for number of cpus when calculating slab order
When creating a new kmem cache, SLUB determines how large the slab pages
will based on number of inputs, including the number of CPUs in the
system. Larger slab pages mean that more objects can be allocated/free
from per-cpu slabs before accessing shared structures, but also
potentially more memory can be wasted due to low slab usage and
fragmentation. The rough idea of using number of CPUs is that larger
systems will be more likely to benefit from reduced contention, and also
should have enough memory to spare.
Number of CPUs used to be determined as nr_cpu_ids, which is number of
possible cpus, but on some systems many will never be onlined, thus
commit 045ab8c9487b ("mm/slub: let number of online CPUs determine the
slub page order") changed it to nr_online_cpus(). However, for kmem
caches created early before CPUs are onlined, this may lead to
permamently low slab page sizes.
Vincent reports a regression [1] of hackbench on arm64 systems:
"I'm facing significant performances regression on a large arm64
server system (224 CPUs). Regressions is also present on small arm64
system (8 CPUs) but in a far smaller order of magnitude
On 224 CPUs system : 9 iterations of hackbench -l 16000 -g 16
v5.11-rc4 : 9.135sec (+/- 0.45%)
v5.11-rc4 + revert this patch: 3.173sec (+/- 0.48%)
v5.10: 3.136sec (+/- 0.40%)"
Mel reports a regression [2] of hackbench on x86_64, with lockstat suggesting
page allocator contention:
"i.e. the patch incurs a 7% to 32% performance penalty. This bisected
cleanly yesterday when I was looking for the regression and then
found the thread.
Numerous caches change size. For example, kmalloc-512 goes from
order-0 (vanilla) to order-2 with the revert.
So mostly this is down to the number of times SLUB calls into the
page allocator which only caches order-0 pages on a per-cpu basis"
Clearly num_online_cpus() doesn't work too early in bootup. We could
change the order dynamically in a memory hotplug callback, but runtime
order changing for existing kmem caches has been already shown as
dangerous, and removed in 32a6f409b693 ("mm, slub: remove runtime
allocation order changes").
It could be resurrected in a safe manner with some effort, but to fix
the regression we need something simpler.
We could use num_present_cpus() that should be the number of physically
present CPUs even before they are onlined. That would work for PowerPC
[3], which triggered the original commit, but that still doesn't work on
arm64 [4] as explained in [5].
So this patch tries to determine the best available value without
specific arch knowledge.
- num_present_cpus() if the number is larger than 1, as that means the
arch is likely setting it properly
- nr_cpu_ids otherwise
This should fix the reported regressions while also keeping the effect
of 045ab8c9487b for PowerPC systems. It's possible there are
configurations where num_present_cpus() is 1 during boot while
nr_cpu_ids is at the same time bloated, so these (if they exist) would
keep the large orders based on nr_cpu_ids as was before 045ab8c9487b.
Nikita Shubin [Tue, 9 Feb 2021 13:31:05 +0000 (16:31 +0300)]
gpio: ep93xx: Fix single irqchip with multi gpiochips
Fixes the following warnings which results in interrupts disabled on
port B/F:
gpio gpiochip1: (B): detected irqchip that is shared with multiple gpiochips: please fix the driver.
gpio gpiochip5: (F): detected irqchip that is shared with multiple gpiochips: please fix the driver.
- added separate irqchip for each interrupt capable gpiochip
- provided unique names for each irqchip
Nikita Shubin [Tue, 9 Feb 2021 13:31:04 +0000 (16:31 +0300)]
gpio: ep93xx: fix BUG_ON port F usage
Two index spaces and ep93xx_gpio_port are confusing.
Instead add a separate struct to store necessary data and remove
ep93xx_gpio_port.
- add struct to store IRQ related data for each IRQ capable chip
- replace offset array with defined offsets
- add IRQ registers offset for each IRQ capable chip into
ep93xx_gpio_banks
------------[ cut here ]------------
kernel BUG at drivers/gpio/gpio-ep93xx.c:64!
---[ end trace 3f6544e133e9f5ae ]---
Fixes: fd935fc421e74 ("gpio: ep93xx: Do not pingpong irq numbers") Cc: <stable@vger.kernel.org> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpio: mxs: GPIO_MXS should not default to y unconditionally
Merely enabling CONFIG_COMPILE_TEST should not enable additional code.
To fix this, restrict the automatic enabling of GPIO_MXS to ARCH_MXS,
and ask the user in case of compile-testing.
Fixes: 6876ca311bfca5d7 ("gpio: mxs: add COMPILE_TEST support for GPIO_MXS") Cc: <stable@vger.kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Jernej Skrabec [Tue, 9 Feb 2021 17:59:00 +0000 (18:59 +0100)]
drm/sun4i: dw-hdmi: Fix max. frequency for H6
It turns out that reasoning for lowering max. supported frequency is
wrong. Scrambling works just fine. Several now fixed bugs prevented
proper functioning, even with rates lower than 340 MHz. Issues were just
more pronounced with higher frequencies.
Fix that by allowing max. supported frequency in HW and fix the comment.
Fixes: cd9063757a22 ("drm/sun4i: DW HDMI: Lower max. supported rate for H6") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-6-jernej.skrabec@siol.net
Jernej Skrabec [Tue, 9 Feb 2021 17:58:59 +0000 (18:58 +0100)]
drm/sun4i: Fix H6 HDMI PHY configuration
As it turns out, vendor HDMI PHY driver for H6 has a pretty big table
of predefined values for various pixel clocks. However, most of them are
not useful/tested because they come from reference driver code. Vendor
PHY driver is concerned with only few of those, namely 27 MHz, 74.25
MHz, 148.5 MHz, 297 MHz and 594 MHz. These are all frequencies for
standard CEA modes.
Fix sun50i_h6_cur_ctr and sun50i_h6_phy_config with the values only for
aforementioned frequencies.
Table sun50i_h6_mpll_cfg doesn't need to be changed because values are
actually frequency dependent and not so much SoC dependent. See i.MX6
documentation for explanation of those values for similar PHY.
Jernej Skrabec [Tue, 9 Feb 2021 17:58:58 +0000 (18:58 +0100)]
drm/sun4i: dw-hdmi: always set clock rate
As expected, HDMI controller clock should always match pixel clock. In
the past, changing HDMI controller rate would seemingly worsen
situation. However, that was the result of other bugs which are now
fixed.
Fix that by removing set_rate quirk and always set clock rate.
Jernej Skrabec [Tue, 9 Feb 2021 17:58:57 +0000 (18:58 +0100)]
drm/sun4i: tcon: set sync polarity for tcon1 channel
Channel 1 has polarity bits for vsync and hsync signals but driver never
sets them. It turns out that with pre-HDMI2 controllers seemingly there
is no issue if polarity is not set. However, with HDMI2 controllers
(H6) there often comes to de-synchronization due to phase shift. This
causes flickering screen. It's safe to assume that similar issues might
happen also with pre-HDMI2 controllers.
Solve issue with setting vsync and hsync polarity. Note that display
stacks with tcon top have polarity bits actually in tcon0 polarity
register.
Ville Syrjälä [Tue, 9 Feb 2021 02:19:17 +0000 (04:19 +0200)]
drm/i915: Fix overlay frontbuffer tracking
We don't have a persistent fb holding a reference to the frontbuffer
object, so every time we do the get+put we throw the frontbuffer object
immediately away. And so the next time around we get a pristine
frontbuffer object with bits==0 even for the old vma. This confuses
the frontbuffer tracking code which understandably expects the old
frontbuffer to have the overlay's bit set.
Fix this by hanging on to the frontbuffer reference until the next
flip. And just to make this a bit more clear let's track the frontbuffer
explicitly instead of just grabbing it via the old vma.
Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1136 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209021918.16234-2-ville.syrjala@linux.intel.com Fixes: 8e7cb1799b4f ("drm/i915: Extract intel_frontbuffer active tracking") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 553c23bdb4775130f333f07a51b047276bc53f79) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ronnie Sahlberg [Wed, 10 Feb 2021 01:55:47 +0000 (11:55 +1000)]
cifs: do not disable noperm if multiuser mount option is not provided
Fixes small regression in implementation of new mount API.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reported-by: Hyunchul Lee <hyc.lee@gmail.com> Tested-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Johannes Weiner [Tue, 9 Feb 2021 21:42:28 +0000 (13:42 -0800)]
Revert "mm: memcontrol: avoid workload stalls when lowering memory.high"
This reverts commit 536d3bf261a2fc3b05b3e91e7eef7383443015cf, as it can
cause writers to memory.high to get stuck in the kernel forever,
performing page reclaim and consuming excessive amounts of CPU cycles.
Before the patch, a write to memory.high would first put the new limit
in place for the workload, and then reclaim the requested delta. After
the patch, the kernel tries to reclaim the delta before putting the new
limit into place, in order to not overwhelm the workload with a sudden,
large excess over the limit. However, if reclaim is actively racing
with new allocations from the uncurbed workload, it can keep the write()
working inside the kernel indefinitely.
This is causing problems in Facebook production. A privileged
system-level daemon that adjusts memory.high for various workloads
running on a host can get unexpectedly stuck in the kernel and
essentially turn into a sort of involuntary kswapd for one of the
workloads. We've observed that daemon busy-spin in a write() for
minutes at a time, neglecting its other duties on the system, and
expending privileged system resources on behalf of a workload.
To remedy this, we have first considered changing the reclaim logic to
break out after a couple of loops - whether the workload has converged
to the new limit or not - and bound the write() call this way. However,
the root cause that inspired the sequence change in the first place has
been fixed through other means, and so a revert back to the proven
limit-setting sequence, also used by memory.max, is preferable.
The sequence was changed to avoid extreme latencies in the workload when
the limit was lowered: the sudden, large excess created by the limit
lowering would erroneously trigger the penalty sleeping code that is
meant to throttle excessive growth from below. Allocating threads could
end up sleeping long after the write() had already reclaimed the delta
for which they were being punished.
However, erroneous throttling also caused problems in other scenarios at
around the same time. This resulted in commit b3ff92916af3 ("mm, memcg:
reclaim more aggressively before high allocator throttling"), included
in the same release as the offending commit. When allocating threads
now encounter large excess caused by a racing write() to memory.high,
instead of entering punitive sleeps, they will simply be tasked with
helping reclaim down the excess, and will be held no longer than it
takes to accomplish that. This is in line with regular limit
enforcement - i.e. if the workload allocates up against or over an
otherwise unchanged limit from below.
With the patch breaking userspace, and the root cause addressed by other
means already, revert it again.
Link: https://lkml.kernel.org/r/20210122184341.292461-1-hannes@cmpxchg.org Fixes: 536d3bf261a2 ("mm: memcontrol: avoid workload stalls when lowering memory.high") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Tejun Heo <tj@kernel.org> Acked-by: Chris Down <chris@chrisdown.name> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Michal Koutný <mkoutny@suse.com> Cc: <stable@vger.kernel.org> [5.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Seth Forshee [Tue, 9 Feb 2021 21:42:17 +0000 (13:42 -0800)]
tmpfs: disallow CONFIG_TMPFS_INODE64 on alpha
As with s390, alpha is a 64-bit architecture with a 32-bit ino_t. With
CONFIG_TMPFS_INODE64=y tmpfs mounts will get 64-bit inode numbers and
display "inode64" in the mount options, whereas passing "inode64" in the
mount options will fail. This leads to erroneous behaviours such as
this:
# mkdir mnt
# mount -t tmpfs nodev mnt
# mount -o remount,rw mnt
mount: /home/ubuntu/mnt: mount point not mounted or bad option.
Prevent CONFIG_TMPFS_INODE64 from being selected on alpha.
Link: https://lkml.kernel.org/r/20210208215726.608197-1-seth.forshee@canonical.com Fixes: ea3271f7196c ("tmpfs: support 64-bit inums per-sb") Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Chris Down <chris@chrisdown.name> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: <stable@vger.kernel.org> [5.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / mirror_ubuntu-kernels.git / log