Stefan Agner [Wed, 20 May 2015 22:35:44 +0000 (00:35 +0200)]
ARM: use ARM_SINGLE_ARMV7M for ARMv7-M platforms
Use the new config symbol ARM_SINGLE_ARMV7M which groups config
symbols used by modern ARMv7-M platforms. This allows supporting
multiple ARMv7-M platforms in one kernel image. However, a common
kernel image requires the combined platforms to share the same
main memory layout to be bootable.
Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 May 2015 08:36:42 +0000 (10:36 +0200)]
ARM: zx: fix building with CONFIG_THUMB2_KERNEL
The newly added zx platform causes a build error when
CONFIG_THUMB2_KERNEL is enabled:
arch/arm/mach-zx/headsmp.S:16: Error: invalid immediate for address calculation (value = 0x00000004)
I'm assuming that the ROM code that is calling these entry
points runs in ARM mode, so there would be another problem
in the same file, and we can solve both problems at once
by adding a '.arm' statement that will make zx_resume_jump
and zx_secondary_startup both be built as ARM code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jun Nie <jun.nie@linaro.org> Tested-by: Jun Nie <jun.nie@linaro.org>
Arnd Bergmann [Fri, 22 May 2015 14:34:06 +0000 (16:34 +0200)]
Merge tag 'omap-for-v4.2/omap1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Merge fixed up omap1 sparse irq support for v4.2 from Tony Lindgren:
Add support for CONFIG_SPARSE_IRQ for omap1. This takes us a bit closer
to making omap1 support multiarch. After this series we still need to
make omap1 use the common clock framework and fix up the drivers to not
rely on includes from mach and plat directories.
Note that this branch depends on a GPIO driver fix in v4.1-rc3 d2d05c65c40e ("gpio: omap: Fix regression for MPUIO interrupts").
* tag 'omap-for-v4.2/omap1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP1: Fix section mismatch warnings for omap_cfg_reg
ARM: OMAP1: Fix randconfig builds if ARCH_OMAP15XX not selected
ARM: OMAP1: Change interrupt numbering for sparse IRQ
ARM: omap1: Switch to use MULTI_IRQ
ARM: OMAP1: Switch to use generic irqchip in preparation for sparse IRQ
ARM: OMAP1: Move UART defines to prepare for sparse IRQ
Arnd Bergmann [Fri, 22 May 2015 14:32:02 +0000 (16:32 +0200)]
Merge tag 'arm-soc/for-4.2/soc-take2' of http://github.com/broadcom/stblinux into next/soc
Merge mach-bcm changes from Florian Fainelli:
This pull request contains the following changes:
- Rafal adds an additional fault code to be ignored by the kernel on BCM5301X SoC
- BCM63138 SMP support which:
* common code to control the PMB bus, to be shared with a reset
controller driver in drivers/reset
* secondary CPU initialization sequence using PMB helpers
* small changes suggested by Russell King to allow platforms to disable VFP
* tag 'arm-soc/for-4.2/soc-take2' of http://github.com/broadcom/stblinux:
ARM: BCM63xx: Add SMP support for BCM63138
ARM: vfp: Add vfp_disable for problematic platforms
ARM: vfp: Add include guards
ARM: BCM63xx: Add secondary CPU PMB initialization sequence
ARM: BCM63xx: Add Broadcom BCM63xx PMB controller helpers
ARM: BCM5301X: Ignore another (BCM4709 specific) fault code
Tony Lindgren [Thu, 21 May 2015 21:50:23 +0000 (14:50 -0700)]
ARM: OMAP1: Fix section mismatch warnings for omap_cfg_reg
This is cleary used after init time too for example for
configuring UART wake-up events during runtime. This fixes
section mismatch warnings for randconfig builds that happen
because __init_or_module.
Tony Lindgren [Thu, 21 May 2015 21:50:23 +0000 (14:50 -0700)]
ARM: OMAP1: Fix randconfig builds if ARCH_OMAP15XX not selected
With the omap1 SPARSE_IRQ changes mach/irqs.h is no longer
automatically included. Turns out now we rely on ARCH_OMAP15XX
including hardware.h from memory.h, so without ARCH_OMAP15XX
we get build failures.
As we have legacy drivers still relying on these indirect
includes, let's not add more mach includes to the drivers.
Those have to be removed anyways for multiplatform support.
Let's fix up mach-omap1 to include soc.h where cpu_is_omap
checks are done, and common.h for board-*.c files.
But let's keep the indirect memory.h include for now to avoid
unnecessary churn in the drivers.
Florian Fainelli [Fri, 15 Aug 2014 02:37:45 +0000 (19:37 -0700)]
ARM: BCM63xx: Add SMP support for BCM63138
Add support for booting the secondary CPU on BCM63138, this involves:
- locating the bootlut to write the reset vector
- powering up the second CPU when we need to using the DT-supplied PMB
references
- disabling VFP when enabled such that we can keep having SMP
ARM: vfp: Add vfp_disable for problematic platforms
Some platforms might not be able to fully utilize VFP when e.g: one CPU
out of two in a SMP complex lacks a VFP unit. Adding code to migrate
task to the CPU which has a VFP unit would be cumbersome and not
performant, instead, just add the ability to disable VFP.
ARM: BCM63xx: Add secondary CPU PMB initialization sequence
The sequence to initialize a secondary CPU using the BCM63138 PMB is
extremely specific and represents much more code than any other on-chip
peripheral (AHCI, USB 3.0 or integrated Ethernet switch), as such we
keep that code local and utilize Device Tree to lookup all the resources
we need from the CPU device tree node.
This patch adds both common register definitions and helper functions
used to issue read/write commands to the Broadcom BCM63xx PMB controller
which is used to power on and release from reset internal on-chip
peripherals such as the integrated Ethernet switch, AHCI, USB, as well
as the secondary CPU core.
This is going to be utilized by the BCM63138 SMP code, as well as by the
BCM63138 reset controller later.
Stefan Agner [Tue, 19 May 2015 22:03:52 +0000 (00:03 +0200)]
ARM: vf610: enable Cortex-M4 configuration on Vybrid SoC
This patch allows to build the Kernel for Vybrid (VF6xx) SoC
when ARMv7-M CPU is selected. The resulting image runs on the
secondary Cortex-M4 core. This core has equally access to all
peripherals as the main Cortex-A5 core. However, there is no
resource control mechanism, hence when both cores are used
simultaneously, orthogonal device tree's are required.
The boot CPU is dependent on the SoC variant. The available
boards use mostly variants where the Cortex-A5 is the primary
and hence the boot CPU. Booting the secondary Cortex-M4 CPU
needs SoC specific registers written. There is no in kernel
support for this right now, a external userspace utility
called "m4boot" can be used to boot the kernel:
Stefan Agner [Tue, 19 May 2015 22:03:51 +0000 (00:03 +0200)]
ARM: introduce ARM_SINGLE_ARMV7M for ARMv7-M platforms
This introduces a new top level config symbol ARM_SINGLE_ARMV7M
for non-MMU, ARMv7-M platforms. It also support multiple ARMv7-M
platforms in one kernel image since the cores share the same
basic memory layout and interrupt controller. However, this works
only if the combined platforms also have a similar (main) memory
layout.
Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Stefan Agner [Tue, 19 May 2015 22:03:50 +0000 (00:03 +0200)]
ARM: unify MMU/!MMU addruart calls
Remove the needless differences between MMU/!MMU addruart calls.
This allows to use the same addruart macro on SoC level. Useful
for SoC consisting of multiple CPUs with and without MMU such as
Freescale Vybrid.
Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rafał Miłecki [Wed, 11 Feb 2015 15:40:58 +0000 (16:40 +0100)]
ARM: BCM5301X: Ignore another (BCM4709 specific) fault code
Broadcom ARM devices seem to generate some fault once per boot. We
already have an ignoring handler for BCM4707/BCM4708, but BCM4709
generates different code.
Tony Lindgren [Wed, 20 May 2015 16:01:21 +0000 (09:01 -0700)]
ARM: OMAP1: Change interrupt numbering for sparse IRQ
Change interrupt numbering for sparse IRQ. We do this using
a fixed offset until we can drop irqs.h once all it's users
have been updated.
Note that this depends on the GPIO fix for the MPUIO IRQs
"gpio: omap: Fix regression for MPUIO interrupts".
Also note that this patch adds some extra irq alloc warnings
that will go away when we stop calling irq_alloc_descs
in gpio-omap.c with a follow-up patch.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 20 May 2015 16:01:21 +0000 (09:01 -0700)]
ARM: omap1: Switch to use MULTI_IRQ
This allows us to get a bit further with SPARSE_IRQ and
MULTIARCH support.
Note that we now also rename omap_irq_flags to omap_l2_irq
as that's the omap_irq_flags naming is confusing. It just
contains the interrupt number for the l2 irq.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 20 May 2015 16:01:20 +0000 (09:01 -0700)]
ARM: OMAP1: Move UART defines to prepare for sparse IRQ
These have been indirectly included via asm/irqs.h that
has included mach/hardware.h unless SPARSE_IRQ is specified.
Let's move them to where the other OMAP serial defines for
8250 are.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Arnd Bergmann [Wed, 20 May 2015 15:41:15 +0000 (17:41 +0200)]
Merge tag 'zynq-soc-for-4.2' of https://github.com/Xilinx/linux-xlnx into next/soc
Merge "arm: Xilinx Zynq SoC patches for v4.2" from Michal Simek:
- Change SoC reset path
- Fix SLCR unlock scheme
* tag 'zynq-soc-for-4.2' of https://github.com/Xilinx/linux-xlnx:
ARM: zynq: Drop use of slcr_unlock in zynq_slcr_system_restart
ARM: zynq: Use restart_handler mechanism for slcr reset
Arnd Bergmann [Mon, 18 May 2015 15:55:16 +0000 (17:55 +0200)]
ARM: uniphier: only select TWD for SMP
This makes uniphier behave like all the other platforms that
support TWD, and only select this driver when SMP is enabled.
Without this, we get a compile error on UP builds:
arch/arm/kernel/smp_twd.c: In function 'twd_local_timer_of_register':
arch/arm/kernel/smp_twd.c:391:20: error: 'setup_max_cpus' undeclared (first use in this function)
Joachim Eastwood [Tue, 19 May 2015 18:55:03 +0000 (20:55 +0200)]
ARM: lpc18xx: define low-level debug symbol for LPC18xx/43xx
Using a dedicated symbol for low-level debugging instead of the
arch symbol will make this platform play nice when enabled on a
kernel that supports multiple platforms.
Stefan Agner [Sat, 16 May 2015 09:44:17 +0000 (11:44 +0200)]
irqchip: vf610-mscm: Support NVIC parent chip
Support the NVIC interrupt controller as node parent of the MSCM
interrupt router. On the dual-core variants of Vybird (VF6xx), the
NVIC interrupt controller is used by the Cortex-M4. To support
running Linux on this core too, MSCM needs NVIC parent support too.
Stefan Agner [Sat, 16 May 2015 09:44:15 +0000 (11:44 +0200)]
genirq: generic chip: Support hierarchy domain
Use the new helper function irq_domain_set_info to make sure the
function irq_domain_set_hwirq_and_chip is being called, which is
crucial to save irqdomain specific data to irq_data.
Stefan Agner [Sat, 16 May 2015 09:44:14 +0000 (11:44 +0200)]
genirq: Add irq_chip_(enable/disable)_parent
Add helper irq_chip_enable_parent and irq_chip_disable_parent. The
helper implement the default behavior in case irq_enable or irq_disable
is not implemented for the parent interrupt chip, which is calling the
irq_mask or irq_unmask respectively.
This adds the helper irq_domain_set_info() in a non-domain hierarchy
variant. This allows to use the helper for generic chip since not
all chips using generic chip support domain hierarchy.
Josh Cartwright [Thu, 19 Mar 2015 13:33:53 +0000 (08:33 -0500)]
ARM: zynq: Drop use of slcr_unlock in zynq_slcr_system_restart
The SLCR is unconditionally unlocked early on boot in zynq_slcr_init()
and not ever re-locked. As such, it is not necessary to explicitly unlock in
the restart codepath.
Signed-off-by: Josh Cartwright <joshc@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Josh Cartwright [Thu, 19 Mar 2015 14:24:38 +0000 (09:24 -0500)]
ARM: zynq: Use restart_handler mechanism for slcr reset
By making use of the restart_handler chain mechanism, the SLCR-based
reset mechanism can be prioritized amongst other mechanisms available on
a particular board.
Choose a default high-ish priority of 192 for this restart mechanism.
Signed-off-by: Josh Cartwright <joshc@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Joachim Eastwood [Mon, 11 May 2015 22:00:47 +0000 (00:00 +0200)]
ARM: lpc18xx: add basic support for NXP LPC18xx/43xx SoCs
Add support for NXP's LPC18xx (Cortex-M3) and LPC43xx (Cortex-M4)
SoCs. These SoCs are NXP's high preformance MCU line and can run at
clock speeds up to 180 MHz for LPC18xx and 204 MHz for LPC43xx.
LPC43xx is more or less a LPC18xx with a Cortex-M4F core and a few
extra peripherals. The LPC43xx series also features one or two
Cortex-M0 cores that can be used to offload the main M4 core.
Maxime Coquelin [Sat, 9 May 2015 07:53:54 +0000 (09:53 +0200)]
ARM: Add STM32 family machine
STMicrolectronics's STM32 series is a family of Cortex-M
microcontrollers. It is used in various applications, and
proposes a wide range of peripherals.
Arnd Bergmann [Fri, 15 May 2015 15:40:15 +0000 (17:40 +0200)]
Merge tag 'pxa-for-4.2' of https://github.com/rjarzmik/linux into next/soc
Merge "pxa changes for v4.2 cycle" from Robert Jarzmik:
The main and only feature is the conversion of all pxa variants to clock
framework. This encompasses pxa25x, pxa27x and pxa3xx, for all boards.
This should be a disruptive cycle in the normally quiet pxa history, as
the change can break any platform, and the test were performed on only 4
boards (lubbock, zylonite, mioa701, cm-x300).
* tag 'pxa-for-4.2' of https://github.com/rjarzmik/linux:
ARM: pxa: Constify irq_domain_ops
ARM: pxa: Transition pxa25x, pxa27x, pxa3xx to clk framework
ARM: pxa: convert eseries to clock framework
ARM: pxa: Transition pxa25x and pxa27x to clk framework
ARM: pxa: pxa27x skip default device initialization with DT
clk: pxa: add missing pxa27x clocks for Irda and sa1100-rtc
ARM: pxa: move gpio11 clock to board files
ARM: pxa: change clocks init sequence
Arnd Bergmann [Fri, 15 May 2015 15:38:05 +0000 (17:38 +0200)]
Merge tag 'rpi-soc-for-armsoc-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi into next/soc
Merge "RaspberryPi SoC (mach) changes due for v4.2" from Lee Jones:
* tag 'rpi-soc-for-armsoc-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi:
ARM: bcm2835: Move the restart/power_off handling to the WDT driver
ARM: bcm2835: Drop the init_irq() hook
ARM: bcm2835: Skip doing our own iotable_init() initialization
Eric Anholt [Fri, 24 Apr 2015 19:08:54 +0000 (12:08 -0700)]
ARM: bcm2835: Move the restart/power_off handling to the WDT driver
Since the WDT is what's used to drive restart and power off, it makes
more sense to keep it there, where the regs are already mapped and
definitions for them provided. Note that this means you may need to
add CONFIG_BCM2835_WDT to retain functionality of your kernel.
Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Eric Anholt [Fri, 24 Apr 2015 19:08:53 +0000 (12:08 -0700)]
ARM: bcm2835: Drop the init_irq() hook
This is the default function that gets called if the hook is NULL.
Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Eric Anholt [Thu, 23 Apr 2015 17:49:11 +0000 (10:49 -0700)]
ARM: bcm2835: Skip doing our own iotable_init() initialization
The only thing we were using this 16MB mapping of IO peripherals for
was the uart's early debug mapping. If we just drop the map_io hook,
the kernel will call debug_ll_io_init() for us, which maps the single
page needed for the device.
Signed-off-by: Eric Anholt <eric@anholt.net> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Brian Norris [Thu, 19 Mar 2015 01:09:05 +0000 (18:09 -0700)]
MAINTAINERS: add brcmstb regex
This could probably consolidate a few file listings. And it satisfies
the spirit of the highly annoying [1] checkpatch warning for every new
file, though it sadly won't quash it.
[1] https://lkml.org/lkml/2014/12/17/24
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Arnd Bergmann [Wed, 13 May 2015 16:01:18 +0000 (18:01 +0200)]
Merge tag 'tegra-for-4.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc
Merge "ARM: tegra: Core SoC changes for v4.2-rc1" from Thierry Reding:
A couple of changes to the core SoC support code. Perhaps the most
important part is a fix for a regression in LP1 suspend/resume code that
was introduced a while back.
* tag 'tegra-for-4.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: move to using a restart handler
ARM: tegra20: Store CPU "resettable" status in IRAM
soc/tegra: Watch wait_for_completion_timeout() return type
Arnd Bergmann [Wed, 13 May 2015 15:49:03 +0000 (17:49 +0200)]
Merge tag 'socfpga_updates_for_v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/soc
Merge "SoCFPGA updates for v4.2" from Dinh Nguyen:
- Add big endian support
- Add earlyprintk support on UART1 that is used on Arria10
- Remove the need to map uart_io_desc
- Use of_iomap to map the SCU
- Remove socfpga_smp_init_cpus as arm_dt_init_cpu_maps is already doing
the CPU mapping.
* tag 'socfpga_updates_for_v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga: use of_iomap to map the SCU
ARM: socfpga: remove the need to map uart_io_desc
ARM: socfpga: Add support for UART1 debug uart for earlyprintk
ARM: socfpga: support big endian for socfpga
ARM: socfpga: enable big endian for secondary core(s)
ARM: debug: fix big endian operation for 8250 word mode
Robert Jarzmik [Sat, 7 Feb 2015 21:54:03 +0000 (22:54 +0100)]
ARM: pxa: Transition pxa25x, pxa27x, pxa3xx to clk framework
Transition the PXA25x, PXA27x and PXA3xx CPUs to the clock framework.
This transition still enables legacy platforms to run without device
tree as before, ie relying on platform data encoded in board specific
files.
This is the last step of clock framework transition for pxa
platforms. It was tested on lubbock (pxa25x), mioa701 (pxa27x) and
zylonite (pxa3xx).
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Robert Jarzmik [Sat, 7 Feb 2015 21:54:02 +0000 (22:54 +0100)]
ARM: pxa: convert eseries to clock framework
As pxa architecture transitions to clock framework, the previously
available INIT_CLKREG is no more. Use the fixed clock rate initializer
to declare the "fake" CLK_CK32K in eseries.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Robert Jarzmik [Sat, 27 Dec 2014 13:55:26 +0000 (14:55 +0100)]
ARM: pxa: Transition pxa25x and pxa27x to clk framework
Transition the PXA25x and PXA27x CPUs to the clock framework.
This transition still enables legacy platforms to run without device
tree as before, ie relying on platform data encoded in board specific
files.
The transition breaks the previous clocks activation of pin
control (gpio11 and gpio12). Machine files should be amended to take
that into account.
This is the last step of clock framework transition for pxa25x and
pxa27x, leaving only pxa3xx for further work.
Reviewed-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Robert Jarzmik [Sat, 27 Dec 2014 13:55:25 +0000 (14:55 +0100)]
ARM: pxa: change clocks init sequence
Since pxa clocks were ported to the clock framework, an ordering issue
appears between clocks and clocksource initialization. As a consequence,
the pxa timer clock cannot be acquired in pxa_timer, and is disabled by
clock framework because it is "unused".
The ordering issue is that in the kernel boot sequence :
start_kernel()
...
time_init()
-> pxa_timer()
-> here the clocksource is initialized
...
rest_init()
kernel_init()
initcalls
-> here the clocks are initialized
In the current sequence, the clocks are initialized way after pxa_timer,
which cannot acquire the OSTIMER0 clock.
To solve this issue, the clocks initialization is moved to pxa_timer(),
so that clocks are initialized before clocksource for non device-tree.
For device-tree, the standard arm time_init() will take care of the
ordering.
Reviewed-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Linus Torvalds [Sun, 10 May 2015 21:58:53 +0000 (14:58 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"I really need to get back to sending these on my Friday, instead of my
Monday morning, but nothing too amazing in here: a few amdkfd fixes, a
few radeon fixes, i915 fixes, one tegra fix and one core fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm: Zero out invalid vblank timestamp in drm_update_vblank_count.
drm/tegra: Don't use vblank_disable_immediate on incapable driver.
drm/radeon: stop trying to suspend UVD sessions
drm/radeon: more strictly validate the UVD codec
drm/radeon: make UVD handle checking more strict
drm/radeon: make VCE handle check more strict
drm/radeon: fix userptr lockup
drm/radeon: fix userptr BO unpin bug v3
drm/amdkfd: Initialize sdma vm when creating sdma queue
drm/amdkfd: Don't report local memory size
drm/amdkfd: allow unregister process with queues
drm/i915: Drop PIPE-A quirk for 945GSE HP Mini
drm/i915: Sink rate read should be saved in deca-kHz
drm/i915/dp: there is no audio on port A
drm/i915: Add missing MacBook Pro models with dual channel LVDS
drm/i915: Assume dual channel LVDS if pixel clock necessitates it
drm/radeon: don't setup audio on asics that don't support it
drm/radeon: disable semaphores for UVD V1 (v2)
Dave Airlie [Sun, 10 May 2015 20:06:22 +0000 (06:06 +1000)]
Merge tag 'drm-intel-fixes-2015-05-08' of git://anongit.freedesktop.org/drm-intel into drm-fixes
misc i915 fixes.
* tag 'drm-intel-fixes-2015-05-08' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Drop PIPE-A quirk for 945GSE HP Mini
drm/i915: Sink rate read should be saved in deca-kHz
drm/i915/dp: there is no audio on port A
drm/i915: Add missing MacBook Pro models with dual channel LVDS
drm/i915: Assume dual channel LVDS if pixel clock necessitates it
Mario Kleiner [Tue, 7 Apr 2015 04:31:09 +0000 (06:31 +0200)]
drm: Zero out invalid vblank timestamp in drm_update_vblank_count.
Since commit 844b03f27739135fe1fed2fef06da0ffc4c7a081 we make
sure that after vblank irq off, we return the last valid
(vblank count, vblank timestamp) pair to clients, e.g., during
modesets, which is good.
An overlooked side effect of that commit for kms drivers without
support for precise vblank timestamping is that at vblank irq
enable, when we update the vblank counter from the hw counter, we
can't update the corresponding vblank timestamp, so now we have a
totally mismatched timestamp for the new count to confuse clients.
Restore old client visible behaviour from before Linux 3.17, but
zero out the timestamp at vblank counter update (instead of disable
as in original implementation) if we can't generate a meaningful
timestamp immediately for the new vblank counter. This will fix
this regression, so callers know they need to retry again later
if they need a valid timestamp, but at the same time preserves
the improvements made in the commit mentioned above.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> #v3.17+ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Sun, 10 May 2015 18:13:19 +0000 (11:13 -0700)]
Merge tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung
Pull samsung fixes from Kukjin Kim:
"Here is Samsung fixes for v4.1. Since I've missed to send this via
arm-soc tree before v4.1-rc3, so I'm sending this to you directly
- fix commit ea08de16eb1b ("ARM: dts: Add DISP1 power domain for
exynos5420") which causes 'unhandled fault: imprecise external
abort' error when PD turned off. ("make DP a consumer of DISP1
power domain")
- fix 's3c-rtc' probe failure on Odriod-X2/U2/U3 boards ("add
'rtc_src' clock to rtc node for source clock of rtc")
- fix typo for 'cpu-crit-0' trip point on exynos5420/5440
- fix S2R failure on exynos5250-snow due to card power of Marvell
WiFi driver (suspend/resume) ("add keep-power-in-susped to WiFi
SDIO node")"
* tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for exynos5250-snow
ARM: dts: Fix typo in trip point temperature for exynos5420/5440
ARM: dts: add 'rtc_src' clock to rtc node for exynos4412-odroid boards
ARM: dts: Make DP a consumer of DISP1 power domain on Exynos5420
Linus Torvalds [Sat, 9 May 2015 23:13:38 +0000 (16:13 -0700)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A few patches have come up since the merge window. The largest one is
a rewrite of the PXA lubbock/mainstone IRQ handling. This was already
broken in 2011 by a change to the GPIO code and only noticed now.
The other changes contained here are:
MAINTAINERS file updates:
- Ray Jui and Scott Branden are now co-maintainers for some of the
mach-bcm chips, while Christian Daudt and Marc Carino have stepped
down.
- Andrew Victor is no longer maintaining at91. Instead, Alexandre
Belloni now becomes an official maintainer, after having done a
bulk of the work for a while.
- Baruch Siach, who added the mach-digicolor platform in 4.1 is now
listed as maintainer
- The git URL for mach-socfpga has changed
Bug fixes:
- Three bug fixes for new rockchip rk3288 code
- A regression fix to make SD card support work on certain ux500
boards
- multiple smaller dts fixes for imx, omap, mvebu, and shmobile
- a regression fiix for omap3 power consumption
- a fix for regression in the ARM CCI bus driver
Configuration changes:
- more imx platforms are now enabled in multi_v7_defconfig"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
MAINTAINERS: add Conexant Digicolor machines entry
MAINTAINERS: socfpga: update the git repo for SoCFPGA
ARM: multi_v7_defconfig: Select more FSL SoCs
MAINTAINERS: replace an AT91 maintainer
drivers: CCI: fix used_mask init in validate_group()
bus: omap_l3_noc: Fix master id address decoding for OMAP5
bus: omap_l3_noc: Fix offset for DRA7 CLK1_HOST_CLK1_2 instance
ARM: dts: dra7: Fix efuse register size for ABB
ARM: dts: am57xx-beagle-x15: Switch GPIO fan number
ARM: dts: am57xx-beagle-x15: Switch UART mux pins
ARM: dts: am437x-sk: reduce col-scan-delay-us
ARM: dts: am437x-sk: fix for new newhaven display module revision
ARM: dts: am57xx-beagle-x15: Fix RTC aliases
ARM: dts: am57xx-beagle-x15: Fix IRQ type for mcp7941x
ARM: dts: omap3: Add #iommu-cells to isp and iva iommu
ARM: omap2plus_defconfig: Enable EXTCON_USB_GPIO
ARM: dts: OMAP3-N900: Add microphone bias voltages
ARM: OMAP2+: Fix omap off idle power consumption creeping up
MAINTAINERS: Update brcmstb entry
MAINTAINERS: Remove Christian Daudt for mach-bcm
...
Linus Torvalds [Sat, 9 May 2015 23:07:14 +0000 (16:07 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user-namespace fix from Eric Biederman:
"Eric Windish recently reported a really bug that allows mounting fresh
copies of proc and sysfs when it really should not be allowed. The
code attempted to verify that proc and sysfs were fully visible but
there is a test missing to ensure that the root of the filesystem is
visible. Doh!
The following patch fixes that.
This fixes a containment issue that the docker folks are seeing"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
mnt: Fix fs_fully_visible to verify the root directory is visible
Linus Torvalds [Sat, 9 May 2015 21:59:05 +0000 (14:59 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Two patches from the irq departement:
- a simple fix to make dummy_irq_chip usable for wakeup scenarios
- removal of the gic arch_extn hackery. Now that all users are
converted we really want to get rid of the interface so people wont
come up with new use cases"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: gic: Drop support for gic_arch_extn
genirq: Set IRQCHIP_SKIP_SET_WAKE flag for dummy_irq_chip
Linus Torvalds [Sat, 9 May 2015 04:39:12 +0000 (21:39 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"A couple of fixes for bugs caught while digging in fs/namei.c. The
first one is this cycle regression, the second is 3.11 and later"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
path_openat(): fix double fput()
namei: d_is_negative() should be checked before ->d_seq validation
Al Viro [Sat, 9 May 2015 02:53:15 +0000 (22:53 -0400)]
path_openat(): fix double fput()
path_openat() jumps to the wrong place after do_tmpfile() - it has
already done path_cleanup() (as part of path_lookupat() called by
do_tmpfile()), so doing that again can lead to double fput().
Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Thu, 7 May 2015 23:24:57 +0000 (19:24 -0400)]
namei: d_is_negative() should be checked before ->d_seq validation
Fetching ->d_inode, verifying ->d_seq and finding d_is_negative() to
be true does *not* mean that inode we'd fetched had been NULL - that
holds only while ->d_seq is still unchanged.
Shift d_is_negative() checks into lookup_fast() prior to ->d_seq
verification.
Reported-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sat, 9 May 2015 03:59:02 +0000 (20:59 -0700)]
Merge branch 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fix from Chris Mason:
"When an arm user reported crashes near page_address(page) in my new
code, it became clear that I can't be trusted with GFP masks. Filipe
beat me to the patch, and I'll just be in the corner with my dunce cap
on"
* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix wrong mapping flags for free space inode
Linus Torvalds [Sat, 9 May 2015 03:38:21 +0000 (20:38 -0700)]
Merge tag 'dm-4.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Two additional fixes for changes introduced via DM during the 4.1
merge window.
The first reverts a dm-crypt change that wasn't correct. The second
fixes a device format regression that impacted userspace"
* tag 'dm-4.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
init: fix regression by supporting devices with major:minor:offset format
Revert "dm crypt: fix deadlock when async crypto algorithm returns -EBUSY"
Linus Torvalds [Sat, 9 May 2015 02:49:35 +0000 (19:49 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes since the merge window;
- fix for a double elevator module release, from Chao Yu. Ancient bug.
- the splice() MORE flag fix from Christophe Leroy.
- a fix for NVMe, fixing a patch that went in in the merge window.
From Keith.
- two fixes for blk-mq CPU hotplug handling, from Ming Lei.
- bdi vs blockdev lifetime fix from Neil Brown, fixing and oops in md.
- two blk-mq fixes from Shaohua, fixing a race on queue stop and a
bad merge issue with FUA writes.
- division-by-zero fix for writeback from Tejun.
- a block bounce page accounting fix, making sure we inc/dec after
bouncing so that pre/post IO pages match up. From Wang YanQing"
* 'for-linus' of git://git.kernel.dk/linux-block:
splice: sendfile() at once fails for big files
blk-mq: don't lose requests if a stopped queue restarts
blk-mq: fix FUA request hang
block: destroy bdi before blockdev is unregistered.
block:bounce: fix call inc_|dec_zone_page_state on different pages confuse value of NR_BOUNCE
elevator: fix double release of elevator module
writeback: use |1 instead of +1 to protect against div by zero
blk-mq: fix CPU hotplug handling
blk-mq: fix race between timeout and CPU hotplug
NVMe: Fix VPD B0 max sectors translation
Linus Torvalds [Sat, 9 May 2015 02:42:59 +0000 (19:42 -0700)]
Merge tag 'gpio-v4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here is a bunch of GPIO fixes that I collected since -rc1, nothing
controversial, nothing special:
- fix a memory leak for GPIO hotplug.
- fix a signedness bug in the ACPI GPIO pin validation.
- driver fixes: Qualcomm SPMI and OMAP MPUIO IRQ issues"
* tag 'gpio-v4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: omap: Fix regression for MPUIO interrupts
gpio: sysfs: fix memory leaks and device hotplug
pinctrl: qcom-spmi-gpio: Fix input value report
pinctrl: qcom-spmi-gpio: Fix output type configuration
gpiolib: change gpio pin from unsigned to signed in acpi callback
Linus Torvalds [Sat, 9 May 2015 02:34:35 +0000 (19:34 -0700)]
Merge tag 'mmc-4.1-rc2' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Don't access RPMB partitions for normal read/write
- Fix hibernation restore sequence
MMC host:
- dw_mmc: Fix card detection for non removable cards
- dw_mmc: Fix sglist issue in 32-bit mode
- sh_mmcif: Fix timeout value for command request"
* tag 'mmc-4.1-rc2' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: dw_mmc: dw_mci_get_cd check MMC_CAP_NONREMOVABLE
mmc: dw_mmc: init desc in dw_mci_idmac_init
mmc: card: Don't access RPMB partitions for normal read/write
mmc: sh_mmcif: Fix timeout value for command request
mmc: core: add missing pm event in mmc_pm_notify to fix hib restore
Linus Torvalds [Sat, 9 May 2015 01:22:05 +0000 (18:22 -0700)]
Merge tag 'trace-fixes-v4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"The newly added ftrace_print_array_seq() function had a bug in it.
Luckily, the only user of it didn't make the 4.1 merge window.
But the helper function should be fixed before 4.2 when the users
start coming in"
* tag 'trace-fixes-v4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Make ftrace_print_array_seq compute buf_len
ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for exynos5250-snow
The Marvell mwifiex driver prevents the system to enter into a suspend
state if the card power is not preserved during a suspend/resume cycle.
So Suspend-to-RAM and Suspend-to-idle are failing on Exynos5250 Snow.
Add the keep-power-in-suspend Power Management property to the SDIO/MMC
node so the mwifiex suspend handler doesn't fail and the system is able
to enter into a suspend state.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene@kernel.org>
Markus Reichl [Fri, 8 May 2015 18:05:51 +0000 (03:05 +0900)]
ARM: dts: add 'rtc_src' clock to rtc node for exynos4412-odroid boards
The Exynos4412 SoC has a s3c6410 RTC where the source clock
is now a mandatory property.
This patch fixes probe failure of s3c-rtc on Odroid-X2/U2/U3 boards.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
ARM: dts: Make DP a consumer of DISP1 power domain on Exynos5420
Commit ea08de16eb1b ("ARM: dts: Add DISP1 power domain for exynos5420")
added a device node for the Exynos5420 DISP1 power domain but dit not
make the DP controller a consumer of that power domain.
This causes an "Unhandled fault: imprecise external abort" error if the
exynos-dp driver tries to access the DP controller registers and the PD
was turned off. This lead to a kernel panic and a complete system hang.
Make the DP controller device node a consumer of the DISP1 power domain
to ensure that the PD is turned on when the exynos-dp driver is probed.
Fixes: ea08de16eb1b ("ARM: dts: Add DISP1 power domain for exynos5420") Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
MAINTAINERS: socfpga: update the git repo for SoCFPGA
The git tree at rocketboards.org is going away. Update the entry to reflect
the address of the new location. Also add an entry for all the socfpga_*
dts files.
Mario Kleiner [Mon, 4 May 2015 04:29:44 +0000 (06:29 +0200)]
drm/tegra: Don't use vblank_disable_immediate on incapable driver.
Tegra would not only need a hardware vblank counter that
increments at leading edge of vblank, but also support
for instantaneous high precision vblank timestamp queries, ie.
a proper implementation of dev->driver->get_vblank_timestamp().
Without these, there can be off-by-one errors during vblank
disable/enable if the scanout is inside vblank at en/disable
time, and additionally clients will never see any useable
vblank timestamps when querying via drmWaitVblank ioctl. This
would negatively affect swap scheduling under X11 and Wayland.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 8 May 2015 10:52:51 +0000 (20:52 +1000)]
Merge tag 'drm-amdkfd-fixes-2015-05-07' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes
- Add missing initialization of SDMA vm register when creating an SDMA queue
- Don't report local memory size, as we don't support local memory allocation
yet.
- Allow to unregister process with exisiting queues. Until now we blocked
it with BUG_ON, which was also an error by itself.
* tag 'drm-amdkfd-fixes-2015-05-07' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Initialize sdma vm when creating sdma queue
drm/amdkfd: Don't report local memory size
drm/amdkfd: allow unregister process with queues
Dave Airlie [Fri, 8 May 2015 10:52:21 +0000 (20:52 +1000)]
Merge branch 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Mostly stability fixes for UVD and VCE, plus a few other bug and regression
fixes.
* 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: stop trying to suspend UVD sessions
drm/radeon: more strictly validate the UVD codec
drm/radeon: make UVD handle checking more strict
drm/radeon: make VCE handle check more strict
drm/radeon: fix userptr lockup
drm/radeon: fix userptr BO unpin bug v3
drm/radeon: don't setup audio on asics that don't support it
drm/radeon: disable semaphores for UVD V1 (v2)
Linus Torvalds [Thu, 7 May 2015 22:58:00 +0000 (15:58 -0700)]
Merge tag 'pm+acpi-4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These include three regression fixes (PCI resources management,
ACPI/PNP device enumeration, ACPI SBS on MacBook) and two ACPI
documentation fixes related to GPIO.
Specifics:
- Fix for a PCI resources management regression introduced during the
4.0 cycle and related to the handling of ACPI resources'
Producer/Consumer flags that turn out to be useless (Jiang Liu)
- Fix for a MacBook regression related to the Smart Battery Subsystem
(SBS) driver causing various problems (stalls on boot, failure to
detect or report battery) to happen and introduced during the 3.18
cycle (Chris Bainbridge)
- Fix for an ACPI/PNP device enumeration regression introduced during
the 3.16 cycle caused by failing to include two PNP device IDs into
the list of IDs that PNP device objects need to be created for
(Witold Szczeponik)
- Fixes for two minor mistakes in the ACPI GPIO properties
documentation (Antonio Ospite, Rafael J Wysocki)"
* tag 'pm+acpi-4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / PNP: add two IDs to list for PNPACPI device enumeration
ACPI / documentation: Fix ambiguity in the GPIO properties document
ACPI / documentation: fix a sentence about GPIO resources
ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook
x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI bus
projects / mirror_ubuntu-zesty-kernel.git / log