Merge tag 'pm-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Make the amd-pstate cpufreq driver take all of the possible
combinations of the 'old' and 'new' status values correctly while
changing the operation mode via sysfs (Wyes Karny)"
* tag 'pm-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
amd-pstate: Fix amd_pstate mode switch
Merge tag 'thermal-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Modify the Intel thermal throttling code to avoid updating unsupported
status clearing mask bits which causes the kernel to complain about
unchecked MSR access (Srinivas Pandruvada)"
* tag 'thermal-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: Avoid updating unsupported THERM_STATUS_CLEAR mask bits
Merge tag 'sound-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes.
At this time, quite a few fixes for the old PCI drivers are found.
Although they are not regression fixes, I took these as they are
materials for stable kernels.
In addition, a couple of regression fixes and another couple of
HD-audio quirks are included"
* tag 'sound-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: disable KAE for Intel DG2
ALSA: hda/realtek: Add quirks for Lenovo Z13/Z16 Gen2
ALSA: hda: patch_realtek: add quirk for Asus N7601ZM
ALSA: firewire-tascam: add missing unwind goto in snd_tscm_stream_start_duplex()
ALSA: emu10k1: don't create old pass-through playback device on Audigy
ALSA: emu10k1: fix capture interrupt handler unlinking
ALSA: hda/sigmatel: fix S/PDIF out on Intel D*45* motherboards
ALSA: hda/sigmatel: add pin overrides for Intel DP45SG motherboard
ALSA: i2c/cs8427: fix iec958 mixer control deactivation
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"We had a fairly slow cycle on the rc side this time, here are the
accumulated fixes, mostly in drivers:
- irdma should not generate extra completions during flushing
- Fix several memory leaks
- Do not get confused in irdma's iwarp mode if IPv6 is present
- Correct a link speed calculation in mlx5
- Increase the EQ/WQ limits on erdma as they are too small for big
applications
- Use the right math for erdma's inline mtt feature
- Make erdma probing more robust to boot time ordering differences
- Fix a KMSAN crash in CMA due to uninitialized qkey"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/core: Fix GID entry ref leak when create_ah fails
RDMA/cma: Allow UD qp_type to join multicast only
RDMA/erdma: Defer probing if netdevice can not be found
RDMA/erdma: Inline mtt entries into WQE if supported
RDMA/erdma: Update default EQ depth to 4096 and max_send_wr to 8192
RDMA/erdma: Fix some typos
IB/mlx5: Add support for 400G_8X lane speed
RDMA/irdma: Add ipv4 check to irdma_find_listener()
RDMA/irdma: Increase iWARP CM default rexmit count
RDMA/irdma: Fix memory leak of PBLE objects
RDMA/irdma: Do not generate SW completions for NOPs
Kai Vehmanen [Thu, 13 Apr 2023 19:11:53 +0000 (22:11 +0300)]
ALSA: hda/hdmi: disable KAE for Intel DG2
Use of keep-alive (KAE) has resulted in loss of audio on some A750/770
cards as the transition from keep-alive to stream playback is not
working as expected. As there is limited benefit of the new KAE mode
on discrete cards, revert back to older silent-stream implementation
on these systems.
Merge tag 'cgroup-for-6.3-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"This is a relatively big pull request this late in the cycle but the
major contributor is the cpuset bug which is rather significant:
- Fix several cpuset bugs including one where it wasn't applying the
target cgroup when tasks are created with CLONE_INTO_CGROUP
With a few smaller fixes:
- Fix inversed locking order in cgroup1 freezer implementation
- Fix garbage cpu.stat::core_sched.forceidle_usec reporting in the
root cgroup"
* tag 'cgroup-for-6.3-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Make cpuset_attach_task() skip subpartitions CPUs for top_cpuset
cgroup/cpuset: Add cpuset_can_fork() and cpuset_cancel_fork() methods
cgroup/cpuset: Make cpuset_fork() handle CLONE_INTO_CGROUP properly
cgroup/cpuset: Wake up cpuset_attach_wq tasks in cpuset_cancel_attach()
cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex
cgroup/cpuset: Fix partition root's cpuset.cpus update bug
cgroup: fix display of forceidle time at root
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few more clk driver fixes:
- Set the max_register member of the spreadtrum regmap so that reads
don't go off the end of the I/O space
- Avoid a clk parent error in the i.MX imx6ul driver when the
selector is unknown
- Fix an oops due to REGCACHE_NONE usage by the Renesas 9-series
driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rs9: Fix suspend/resume
clk: imx6ul: fix "failed to get parent" error
clk: sprd: set max_register according to mapping range
Merge tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, and bluetooth.
Not all that quiet given spring celebrations, but "current" fixes are
thinning out, which is encouraging. One outstanding regression in the
mlx5 driver when using old FW, not blocking but we're pushing for a
fix.
Current release - new code bugs:
- eth: enetc: workaround for unresponsive pMAC after receiving
express traffic
Previous releases - regressions:
- rtnetlink: restore RTM_NEW/DELLINK notification behavior, keep the
pid/seq fields 0 for backward compatibility
Previous releases - always broken:
- sctp: fix a potential overflow in sctp_ifwdtsn_skip
- mptcp:
- use mptcp_schedule_work instead of open-coding it and make the
worker check stricter, to avoid scheduling work on closed
sockets
- fix NULL pointer dereference on fastopen early fallback
- skbuff: fix memory corruption due to a race between skb coalescing
and releasing clones confusing page_pool reference counting
- bonding: fix neighbor solicitation validation on backup slaves
- bpf: tcp: use sock_gen_put instead of sock_put in bpf_iter_tcp
- bpf: arm64: fixed a BTI error on returning to patched function
- openvswitch: fix race on port output leading to inf loop
- sfp: initialize sfp->i2c_block_size at sfp allocation to avoid
returning a different errno than expected
- phy: nxp-c45-tja11xx: unregister PTP, purge queues on remove
- Bluetooth: fix printing errors if LE Connection times out
- Bluetooth: assorted UaF, deadlock and data race fixes
- adjust the XDP Rx flow hash API to also include the protocol layers
over which the hash was computed"
* tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg
mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type
veth: bpf_xdp_metadata_rx_hash add xdp rss hash type
mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type
xdp: rss hash types representation
selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters
skbuff: Fix a race between coalescing and releasing SKBs
net: macb: fix a memory corruption in extended buffer descriptor mode
selftests: add the missing CONFIG_IP_SCTP in net config
udp6: fix potential access to stale information
selftests: openvswitch: adjust datapath NL message declaration
selftests: mptcp: userspace pm: uniform verify events
mptcp: fix NULL pointer dereference on fastopen early fallback
mptcp: stricter state check in mptcp_worker
mptcp: use mptcp_schedule_work instead of open-coding it
net: enetc: workaround for unresponsive pMAC after receiving express traffic
sctp: fix a potential overflow in sctp_ifwdtsn_skip
net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()
rtnetlink: Restore RTM_NEW/DELLINK notification behavior
net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
...
Merge tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix interaction between fw_devlink and DT overlays causing devices to
not be probed
- Fix the compatible string for loongson,cpu-interrupt-controller
* tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
treewide: Fix probing of devices in DT overlays
dt-bindings: interrupt-controller: loongarch: Fix mismatched compatible
Merge tag 'pinctrl-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"This is just a revert of the AMD fix, because the fix broke some
laptops. We are working on a proper solution"
* tag 'pinctrl-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
Revert "pinctrl: amd: Disable and mask interrupts on resume"
Merge tag 'drm-fixes-2023-04-13' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
- two fbcon regressions
- amdgpu: dp mst, smu13
- i915: dual link dsi for tgl+
- armada, nouveau, drm/sched, fbmem
* tag 'drm-fixes-2023-04-13' of git://anongit.freedesktop.org/drm/drm:
fbcon: set_con2fb_map needs to set con2fb_map!
fbcon: Fix error paths in set_con2fb_map
drm/amd/pm: correct the pcie link state check for SMU13
drm/amd/pm: correct SMU13.0.7 max shader clock reporting
drm/amd/pm: correct SMU13.0.7 pstate profiling clock settings
drm/amd/display: Pass the right info to drm_dp_remove_payload
drm/armada: Fix a potential double free in an error handling path
fbmem: Reject FB_ACTIVATE_KD_TEXT from userspace
drm/nouveau/fb: add missing sysmen flush callbacks
drm/i915/dsi: fix DSS CTL register offsets for TGL+
drm/scheduler: Fix UAF race in drm_sched_entity_push_job()
Jakub Kicinski [Thu, 13 Apr 2023 20:04:44 +0000 (13:04 -0700)]
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-04-13
We've added 6 non-merge commits during the last 1 day(s) which contain
a total of 14 files changed, 205 insertions(+), 38 deletions(-).
The main changes are:
1) One late straggler fix on the XDP hints side which fixes
bpf_xdp_metadata_rx_hash kfunc API before the release goes out
in order to provide information on the RSS hash type,
from Jesper Dangaard Brouer.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg
mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type
veth: bpf_xdp_metadata_rx_hash add xdp rss hash type
mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type
xdp: rss hash types representation
selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters
====================
Current API for bpf_xdp_metadata_rx_hash() returns the raw RSS hash value,
but doesn't provide information on the RSS hash type (part of 6.3-rc).
This patchset proposal is to change the function call signature via adding
a pointer value argument for providing the RSS hash type.
Patchset also removes all bpf_printk's from xdp_hw_metadata program
that we expect driver developers to use. Instead counters are introduced
for relaying e.g. skip and fail info.
====================
veth: bpf_xdp_metadata_rx_hash add xdp rss hash type
Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type.
The veth driver currently only support XDP-hints based on SKB code path.
The SKB have lost information about the RSS hash type, by compressing
the information down to a single bitfield skb->l4_hash, that only knows
if this was a L4 hash value.
In preparation for veth, the xdp_rss_hash_type have an L4 indication
bit that allow us to return a meaningful L4 indication when working
with SKB based packets.
The RSS hash type specifies what portion of packet data NIC hardware used
when calculating RSS hash value. The RSS types are focused on Internet
traffic protocols at OSI layers L3 and L4. L2 (e.g. ARP) often get hash
value zero and no RSS type. For L3 focused on IPv4 vs. IPv6, and L4
primarily TCP vs UDP, but some hardware supports SCTP.
Hardware RSS types are differently encoded for each hardware NIC. Most
hardware represent RSS hash type as a number. Determining L3 vs L4 often
requires a mapping table as there often isn't a pattern or sorting
according to ISO layer.
The patch introduce a XDP RSS hash type (enum xdp_rss_hash_type) that
contains both BITs for the L3/L4 types, and combinations to be used by
drivers for their mapping tables. The enum xdp_rss_type_bits get exposed
to BPF via BTF, and it is up to the BPF-programmer to match using these
defines.
This proposal change the kfunc API bpf_xdp_metadata_rx_hash() adding
a pointer value argument for provide the RSS hash type.
Change signature for all xmo_rx_hash calls in drivers to make it compile.
The RSS type implementations for each driver comes as separate patches.
Daniel Vetter [Wed, 12 Apr 2023 15:31:46 +0000 (17:31 +0200)]
fbcon: set_con2fb_map needs to set con2fb_map!
I got really badly confused in d443d9386472 ("fbcon: move more common
code into fb_open()") because we set the con2fb_map before the failure
points, which didn't look good.
But in trying to fix that I moved the assignment into the wrong path -
we need to do it for _all_ vc we take over, not just the first one
(which additionally requires the call to con2fb_acquire_newinfo).
I've figured this out because of a KASAN bug report, where the
fbcon_registered_fb and fbcon_display arrays went out of sync in
fbcon_mode_deleted() because the con2fb_map pointed at the old
fb_info, but the modes and everything was updated for the new one.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Helge Deller <deller@gmx.de> Tested-by: Xingyuan Mo <hdthky0@gmail.com> Fixes: d443d9386472 ("fbcon: move more common code into fb_open()") Reported-by: Xingyuan Mo <hdthky0@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Xingyuan Mo <hdthky0@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v5.19+
Daniel Vetter [Wed, 12 Apr 2023 15:23:49 +0000 (17:23 +0200)]
fbcon: Fix error paths in set_con2fb_map
This is a regressoin introduced in b07db3958485 ("fbcon: Ditch error
handling for con2fb_release_oldinfo"). I failed to realize what the if
(!err) checks. The mentioned commit was dropping the
con2fb_release_oldinfo() return value but the if (!err) was also
checking whether the con2fb_acquire_newinfo() function call above
failed or not.
Fix this with an early return statement.
Note that there's still a difference compared to the orginal state of
the code, the below lines are now also skipped on error:
if (!search_fb_in_map(info_idx))
info_idx = newidx;
These are only needed when we've actually thrown out an old fb_info
from the console mappings, which only happens later on.
Also move the fbcon_add_cursor_work() call into the same if block,
it's all protected by console_lock so doesn't matter when we set up
the blinking cursor delayed work anyway. This further simplifies the
control flow and allows us to ditch the found local variable.
v2: Clarify commit message (Javier)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Helge Deller <deller@gmx.de> Tested-by: Xingyuan Mo <hdthky0@gmail.com> Fixes: b07db3958485 ("fbcon: Ditch error handling for con2fb_release_oldinfo") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Xingyuan Mo <hdthky0@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v5.19+
skbuff: Fix a race between coalescing and releasing SKBs
Commit 1effe8ca4e34 ("skbuff: fix coalescing for page_pool fragment
recycling") allowed coalescing to proceed with non page pool page and page
pool page when @from is cloned, i.e.
However, it actually requires skb_cloned(@from) to hold true until
coalescing finishes in this situation. If the other cloned SKB is
released while the merging is in process, from_shinfo->nr_frags will be
set to 0 toward the end of the function, causing the increment of frag
page _refcount to be unexpectedly skipped resulting in inconsistent
reference counts. Later when SKB(@to) is released, it frees the page
directly even though the page pool page is still in use, leading to
use-after-free or double-free errors. So it should be prohibited.
Roman Gushchin [Wed, 12 Apr 2023 23:21:44 +0000 (16:21 -0700)]
net: macb: fix a memory corruption in extended buffer descriptor mode
For quite some time we were chasing a bug which looked like a sudden
permanent failure of networking and mmc on some of our devices.
The bug was very sensitive to any software changes and even more to
any kernel debug options.
Finally we got a setup where the problem was reproducible with
CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma:
Lars was fast to find an explanation: according to the datasheet
bit 2 of the rx buffer descriptor entry has a different meaning in the
extended mode:
Address [2] of beginning of buffer, or
in extended buffer descriptor mode (DMA configuration register [28] = 1),
indicates a valid timestamp in the buffer descriptor entry.
The macb driver didn't mask this bit while getting an address and it
eventually caused a memory corruption and a dma failure.
The problem is resolved by explicitly clearing the problematic bit
if hw timestamping is used.
Fixes: 7b4296148066 ("net: macb: Add support for PTP timestamps in DMA descriptors") Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Co-developed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230412232144.770336-1-roman.gushchin@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 12 Apr 2023 13:03:08 +0000 (13:03 +0000)]
udp6: fix potential access to stale information
lena wang reported an issue caused by udpv6_sendmsg()
mangling msg->msg_name and msg->msg_namelen, which
are later read from ____sys_sendmsg() :
/*
* If this is sendmmsg() and sending to current destination address was
* successful, remember it.
*/
if (used_address && err >= 0) {
used_address->name_len = msg_sys->msg_namelen;
if (msg_sys->msg_name)
memcpy(&used_address->name, msg_sys->msg_name,
used_address->name_len);
}
udpv6_sendmsg() wants to pretend the remote address family
is AF_INET in order to call udp_sendmsg().
A fix would be to modify the address in-place, instead
of using a local variable, but this could have other side effects.
Instead, restore initial values before we return from udpv6_sendmsg().
Fixes: c71d8ebe7a44 ("net: Fix security_socket_sendmsg() bypass problem.") Reported-by: lena wang <lena.wang@mediatek.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20230412130308.1202254-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netlink message for creating a new datapath takes an array
of ports for the PID creation. This shouldn't cause much issue
but correct it for future cases where we need to do decode of
datapath information that could include the per-cpu PID map.
Simply adding a "sleep" before checking something is usually not a good
idea because the time that has been picked can not be enough or too
much. The best is to wait for events with a timeout.
In this selftest, 'sleep 0.5' is used more than 40 times. It is always
used before calling a 'verify_*' function except for this
verify_listener_events which has been added later.
At the end, using all these 'sleep 0.5' seems to work: the slow CIs
don't complain so far. Also because it doesn't take too much time, we
can just add two more 'sleep 0.5' to uniform what is done before calling
a 'verify_*' function. For the same reasons, we can also delay a bigger
refactoring to replace all these 'sleep 0.5' by functions waiting for
events instead of waiting for a fix time and hope for the best.
Fixes: 6c73008aa301 ("selftests: mptcp: listener test for userspace PM") Cc: stable@vger.kernel.org Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 11 Apr 2023 19:26:45 +0000 (22:26 +0300)]
net: enetc: workaround for unresponsive pMAC after receiving express traffic
I have observed an issue where the RX direction of the LS1028A ENETC pMAC
seems unresponsive. The minimal procedure to reproduce the issue is:
1. Connect ENETC port 0 with a loopback RJ45 cable to one of the Felix
switch ports (0).
2. Bring the ports up (MAC Merge layer is not enabled on either end).
3. Send a large quantity of unidirectional (express) traffic from Felix
to ENETC. I tried altering frame size and frame count, and it doesn't
appear to be specific to either of them, but rather, to the quantity
of octets received. Lowering the frame count, the minimum quantity of
packets to reproduce relatively consistently seems to be around 37000
frames at 1514 octets (w/o FCS) each.
4. Using ethtool --set-mm, enable the pMAC in the Felix and in the ENETC
ports, in both RX and TX directions, and with verification on both
ends.
5. Wait for verification to complete on both sides.
6. Configure a traffic class as preemptible on both ends.
7. Send some packets again.
The issue is at step 5, where the verification process of ENETC ends
(meaning that Felix responds with an SMD-R and ENETC sees the response),
but the verification process of Felix never ends (it remains VERIFYING).
If step 3 is skipped or if ENETC receives less traffic than
approximately that threshold, the test runs all the way through
(verification succeeds on both ends, preemptible traffic passes fine).
If, between step 4 and 5, the step below is also introduced:
4.1. Disable and re-enable PM0_COMMAND_CONFIG bit RX_EN
then again, the sequence of steps runs all the way through, and
verification succeeds, even if there was the previous RX traffic
injected into ENETC.
Traffic sent *by* the ENETC port prior to enabling the MAC Merge layer
does not seem to influence the verification result, only received
traffic does.
The LS1028A manual does not mention any relationship between
PM0_COMMAND_CONFIG and MMCSR, and the hardware people don't seem to
know for now either.
The bit that is toggled to work around the issue is also toggled
by enetc_mac_enable(), called from phylink's mac_link_down() and
mac_link_up() methods - which is how the workaround was found:
verification would work after a link down/up.
Fixes: c7b9e8086902 ("net: enetc: add support for MAC Merge layer") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230411192645.1896048-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xin Long [Mon, 10 Apr 2023 19:43:30 +0000 (15:43 -0400)]
sctp: fix a potential overflow in sctp_ifwdtsn_skip
Currently, when traversing ifwdtsn skips with _sctp_walk_ifwdtsn, it only
checks the pos against the end of the chunk. However, the data left for
the last pos may be < sizeof(struct sctp_ifwdtsn_skip), and dereference
it as struct sctp_ifwdtsn_skip may cause coverflow.
This patch fixes it by checking the pos against "the end of the chunk -
sizeof(struct sctp_ifwdtsn_skip)" in sctp_ifwdtsn_skip, similar to
sctp_fwdtsn_skip.
It is because that skb->len requires at least sizeof(struct qrtr_ctrl_pkt)
in qrtr_tx_resume(). And skb->len equals to size in qrtr_endpoint_post().
But size is less than sizeof(struct qrtr_ctrl_pkt) when qrtr_cb->type
equals to QRTR_TYPE_RESUME_TX in qrtr_endpoint_post() under the syzbot
scenario. This triggers the uninit variable access bug.
Add size check when qrtr_cb->type equals to QRTR_TYPE_RESUME_TX in
qrtr_endpoint_post() to fix the bug.
The commits referenced below allows userspace to use the NLM_F_ECHO flag
for RTM_NEW/DELLINK operations to receive unicast notifications for the
affected link. Prior to these changes, applications may have relied on
multicast notifications to learn the same information without specifying
the NLM_F_ECHO flag.
For such applications, the mentioned commits changed the behavior for
requests not using NLM_F_ECHO. Multicast notifications are still received,
but now use the portid of the requester and the sequence number of the
request instead of zero values used previously. For the application, this
message may be unexpected and likely handled as a response to the
NLM_F_ACKed request, especially if it uses the same socket to handle
requests and notifications.
To fix existing applications relying on the old notification behavior,
set the portid and sequence number in the notification only if the
request included the NLM_F_ECHO flag. This restores the old behavior
for applications not using it, but allows unicasted notifications for
others.
Fixes: f3a63cce1b4f ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_delete_link") Fixes: d88e136cab37 ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_newlink_create") Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Guillaume Nault <gnault@redhat.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230411074319.24133-1-martin@strongswan.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'for-linus-2023041201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- kernel panic fix for intel-ish-hid driver (Tanu Malhotra)
- buffer overflow fix in hid-sensor-custom driver (Todd Brandt)
- two device specific quirks (Alessandro Manca, Philippe Troin)
* tag 'for-linus-2023041201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: intel-ish-hid: Fix kernel panic during warm reset
HID: hid-sensor-custom: Fix buffer overrun in device name
HID: topre: Add support for 87 keys Realforce R2
HID: add HP 13t-aw100 & 14t-ea100 digitizer battery quirks
Wayne Lin [Fri, 17 Feb 2023 05:26:56 +0000 (13:26 +0800)]
drm/amd/display: Pass the right info to drm_dp_remove_payload
[Why & How]
drm_dp_remove_payload() interface was changed. Correct amdgpu dm code
to pass the right parameter to the drm helper function.
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Waiman Long [Tue, 11 Apr 2023 13:36:00 +0000 (09:36 -0400)]
cgroup/cpuset: Make cpuset_attach_task() skip subpartitions CPUs for top_cpuset
It is found that attaching a task to the top_cpuset does not currently
ignore CPUs allocated to subpartitions in cpuset_attach_task(). So the
code is changed to fix that.
Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Waiman Long [Tue, 11 Apr 2023 13:35:59 +0000 (09:35 -0400)]
cgroup/cpuset: Add cpuset_can_fork() and cpuset_cancel_fork() methods
In the case of CLONE_INTO_CGROUP, not all cpusets are ready to accept
new tasks. It is too late to check that in cpuset_fork(). So we need
to add the cpuset_can_fork() and cpuset_cancel_fork() methods to
pre-check it before we can allow attachment to a different cpuset.
We also need to set the attach_in_progress flag to alert other code
that a new task is going to be added to the cpuset.
Fixes: ef2c41cf38a7 ("clone3: allow spawning processes into cgroups") Suggested-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Waiman Long <longman@redhat.com> Cc: stable@vger.kernel.org # v5.7+ Signed-off-by: Tejun Heo <tj@kernel.org>
Waiman Long [Tue, 11 Apr 2023 13:35:58 +0000 (09:35 -0400)]
cgroup/cpuset: Make cpuset_fork() handle CLONE_INTO_CGROUP properly
By default, the clone(2) syscall spawn a child process into the same
cgroup as its parent. With the use of the CLONE_INTO_CGROUP flag
introduced by commit ef2c41cf38a7 ("clone3: allow spawning processes
into cgroups"), the child will be spawned into a different cgroup which
is somewhat similar to writing the child's tid into "cgroup.threads".
The current cpuset_fork() method does not properly handle the
CLONE_INTO_CGROUP case where the cpuset of the child may be different
from that of its parent. Update the cpuset_fork() method to treat the
CLONE_INTO_CGROUP case similar to cpuset_attach().
Since the newly cloned task has not been running yet, its actual
memory usage isn't known. So it is not necessary to make change to mm
in cpuset_fork().
Fixes: ef2c41cf38a7 ("clone3: allow spawning processes into cgroups") Reported-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Waiman Long <longman@redhat.com> Cc: stable@vger.kernel.org # v5.7+ Signed-off-by: Tejun Heo <tj@kernel.org>
Waiman Long [Tue, 11 Apr 2023 13:35:57 +0000 (09:35 -0400)]
cgroup/cpuset: Wake up cpuset_attach_wq tasks in cpuset_cancel_attach()
After a successful cpuset_can_attach() call which increments the
attach_in_progress flag, either cpuset_cancel_attach() or cpuset_attach()
will be called later. In cpuset_attach(), tasks in cpuset_attach_wq,
if present, will be woken up at the end. That is not the case in
cpuset_cancel_attach(). So missed wakeup is possible if the attach
operation is somehow cancelled. Fix that by doing the wakeup in
cpuset_cancel_attach() as well.
Fixes: e44193d39e8d ("cpuset: let hotplug propagation work wait for task attaching") Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex
syzbot is reporting circular locking dependency between cpu_hotplug_lock
and freezer_mutex, for commit f5d39b020809 ("freezer,sched: Rewrite core
freezer logic") replaced atomic_inc() in freezer_apply_state() with
static_branch_inc() which holds cpu_hotplug_lock.
David Howells [Wed, 12 Apr 2023 12:18:57 +0000 (13:18 +0100)]
netfs: Fix netfs_extract_iter_to_sg() for ITER_UBUF/IOVEC
Fix netfs_extract_iter_to_sg() for ITER_UBUF and ITER_IOVEC to set the
size of the page to the part of the page extracted, not the remaining
amount of data in the extracted page array at that point.
This doesn't yet affect anything as cifs, the only current user, only
passes in non-user-backed iterators.
Fixes: 018584697533 ("netfs: Add a function to extract an iterator into a scatterlist") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Cc: Steve French <sfrench@samba.org> Cc: Shyam Prasad N <nspmangalore@gmail.com> Cc: Rohith Surabattula <rohiths.msft@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rob Herring [Mon, 10 Apr 2023 23:27:19 +0000 (18:27 -0500)]
net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
TI CPSW uses of_platform_* functions which are declared in of_platform.h.
of_platform.h gets implicitly included by of_device.h, but that is going
to be removed soon. Nothing else depends on of_device.h so it can be
dropped. of_platform.h also implicitly includes platform_device.h, so
add an explicit include for it, too.
Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When dma_set_mask fails it directly returns without disabling pci
device and freeing ipc_pcie. Fix this my calling a correct goto label
As dma_set_mask returns either 0 or -EIO, we can use a goto label, as
it finally returns -EIO.
Add a set_mask_fail goto label which stands consistent with other goto
labels in this function..
Fixes: 035e3befc191 ("net: wwan: iosm: fix driver not working with INTEL_IOMMU disabled") Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
smc: Fix use-after-free in tcp_write_timer_handler().
With Eric's ref tracker, syzbot finally found a repro for
use-after-free in tcp_write_timer_handler() by kernel TCP
sockets. [0]
If SMC creates a kernel socket in __smc_create(), the kernel
socket is supposed to be freed in smc_clcsock_release() by
calling sock_release() when we close() the parent SMC socket.
However, at the end of smc_clcsock_release(), the kernel
socket's sk_state might not be TCP_CLOSE. This means that
we have not called inet_csk_destroy_sock() in __tcp_close()
and have not stopped the TCP timers.
The kernel socket's TCP timers can be fired later, so we
need to hold a refcnt for net as we do for MPTCP subflows
in mptcp_subflow_create_socket().
[0]:
leaked reference.
sk_alloc (./include/net/net_namespace.h:335 net/core/sock.c:2108)
inet_create (net/ipv4/af_inet.c:319 net/ipv4/af_inet.c:244)
__sock_create (net/socket.c:1546)
smc_create (net/smc/af_smc.c:3269 net/smc/af_smc.c:3284)
__sock_create (net/socket.c:1546)
__sys_socket (net/socket.c:1634 net/socket.c:1618 net/socket.c:1661)
__x64_sys_socket (net/socket.c:1672)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
==================================================================
BUG: KASAN: slab-use-after-free in tcp_write_timer_handler (net/ipv4/tcp_timer.c:378 net/ipv4/tcp_timer.c:624 net/ipv4/tcp_timer.c:594)
Read of size 1 at addr ffff888052b65e0d by task syzrepro/18091
Fixes: ac7138746e14 ("smc: establish new socket family") Reported-by: syzbot+7e1e1bdb852961150198@syzkaller.appspotmail.com Link: https://lore.kernel.org/netdev/000000000000a3f51805f8bcc43a@google.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Static code analyzer complains to unchecked return value.
The result of pci_reset_function() is unchecked.
Despite, the issue is on the FLR supported code path and in that
case reset can be done with pcie_flr(), the patch uses less invasive
approach by adding the result check of pci_reset_function().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism") Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 12 Apr 2023 04:37:53 +0000 (21:37 -0700)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
iavf: fix racing in VLANs
Ahmed Zaki says:
This patchset mainly fixes a racing issue in the iavf where the number of
VLANs in the vlan_filter_list might be more than the PF limit. To fix that,
we get rid of the cvlans and svlans bitmaps and keep all the required info
in the list.
The second patch adds two new states that are needed so that we keep the
VLAN info while the interface goes DOWN:
-- DISABLE (notify PF, but keep the filter in the list)
-- INACTIVE (dev is DOWN, filter is removed from PF)
Finally, the current code keeps each state in a separate bit field, which
is error prone. The first patch refactors that by replacing all bits with
a single enum. The changes are minimal where each bit change is replaced
with the new state value.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: remove active_cvlans and active_svlans bitmaps
iavf: refactor VLAN filter states
====================
Jakub Kicinski [Wed, 12 Apr 2023 04:18:23 +0000 (21:18 -0700)]
Merge tag 'for-net-2023-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix not setting Dath Path for broadcast sink
- Fix not cleaning up on LE Connection failure
- SCO: Fix possible circular locking dependency
- L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}
- Fix race condition in hidp_session_thread
- btbcm: Fix logic error in forming the board name
- btbcm: Fix use after free in btsdio_remove
* tag 'for-net-2023-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}
Bluetooth: Set ISO Data Path on broadcast sink
Bluetooth: hci_conn: Fix possible UAF
Bluetooth: SCO: Fix possible circular locking dependency sco_sock_getsockopt
Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm
bluetooth: btbcm: Fix logic error in forming the board name.
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition
Bluetooth: Fix race condition in hidp_session_thread
Bluetooth: Fix printing errors if LE Connection times out
Bluetooth: hci_conn: Fix not cleaning up on LE Connection failure
====================
This patch introduces a regression on Lenovo Z13, which can't wake
from the lid with it applied; and some unspecified AMD based Dell
platforms are unable to wake from hitting the power button
When loading a DT overlay that creates a device, the device is not
probed, unless the DT overlay is unloaded and reloaded again.
After the recent refactoring to improve fw_devlink, it no longer depends
on the "compatible" property to identify which device tree nodes will
become struct devices. fw_devlink now picks up dangling consumers
(consumers pointing to descendent device tree nodes of a device that
aren't converted to child devices) when a device is successfully bound
to a driver. See __fw_devlink_pickup_dangling_consumers().
However, during DT overlay, a device's device tree node can have
sub-nodes added/removed without unbinding/rebinding the driver. This
difference in behavior between the normal device instantiation and
probing flow vs. the DT overlay flow has a bunch of implications that
are pointed out elsewhere[1]. One of them is that the fw_devlink logic
to pick up dangling consumers is never exercised.
This patch solves the fw_devlink issue by marking all DT nodes added by
DT overlays with FWNODE_FLAG_NOT_DEVICE (fwnode that won't become
device), and by clearing the flag when a struct device is actually
created for the DT node. This way, fw_devlink knows not to have
consumers waiting on these newly added DT nodes, and to propagate the
dependency to an ancestor DT node that has the corresponding struct
device.
Based on a patch by Saravana Kannan, which covered only platform and spi
devices.
Merge tag 'pci-v6.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Provide pci_msix_can_alloc_dyn() stub when CONFIG_PCI_MSI unset to
avoid build errors (Reinette Chatre)
- Quirk AMD XHCI controller that loses MSI-X state in D3hot to avoid
broken USB after hotplug or suspend/resume (Basavaraj Natikar)
- Fix use-after-free in pci_bus_release_domain_nr() (Rob Herring)
* tag 'pci-v6.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Fix use-after-free in pci_bus_release_domain_nr()
x86/PCI: Add quirk for AMD XHCI controller that loses MSI-X state in D3hot
PCI/MSI: Provide missing stub for pci_msix_can_alloc_dyn()
Wyes Karny [Thu, 30 Mar 2023 14:13:14 +0000 (14:13 +0000)]
amd-pstate: Fix amd_pstate mode switch
amd_pstate mode can be changed by writing the mode name to the `status`
sysfs. But some combinations are not working. Fix this issue by taking
care of the edge cases.
Before the fix the mode change combination test fails:
#./pst_test.sh
Test passed: from: disable, to
Test passed: from: disable, to disable
Test failed: 1, From mode: disable, to mode: passive
Test failed: 1, From mode: disable, to mode: active
Test failed: 1, From mode: passive, to mode: active
Test passed: from: passive, to disable
Test failed: 1, From mode: passive, to mode: passive
Test failed: 1, From mode: passive, to mode: active
Test failed: 1, From mode: active, to mode: active
Test passed: from: active, to disable
Test failed: 1, From mode: active, to mode: passive
Test failed: 1, From mode: active, to mode: active
After the fix test passes:
#./pst_test.sh
Test passed: from: disable, to
Test passed: from: disable, to disable
Test passed: from: disable, to passive
Test passed: from: disable, to active
Test passed: from: passive, to active
Test passed: from: passive, to disable
Test passed: from: passive, to passive
Test passed: from: passive, to active
Test passed: from: active, to active
Test passed: from: active, to disable
Test passed: from: active, to passive
Test passed: from: active, to active
Fixes: abd61c08ef349 ("cpufreq: amd-pstate: add driver working mode switch support") Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alexey Kardashevskiy <aik@amd.com> Signed-off-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge tag 'for-6.3-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix fast checksum detection, this affects filesystems with non-crc32c
checksum, calculation would not be offloaded to worker threads
- restore thread_pool mount option behaviour for endio workers, the new
value for maximum active threads would not be set to the actual work
queues
* tag 'for-6.3-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix fast csum implementation detection
btrfs: restore the thread_pool= behavior in remount for the end I/O workqueues
Merge tag 'mtd/fixes-for-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Core fix:
- mtdblock: Tolerate corrected bit-flips
Raw NAND fixes:
- meson: Fix bitmask for length in command word
- stm32_fmc2:
- Remove unsupported EDO mode
- Use timings.mode instead of checking tRC_min.
The first patch is the real fix but nowadays we use
timings.mode instead of bare timings, so in order to ease the
backports, the fix was split into two steps, the first one easy
to backport on older kernels, the second one just as a
follow-up so recent stable kernels would look like the
mainline"
* tag 'mtd/fixes-for-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: meson: fix bitmask for length in command word
mtdblock: tolerate corrected bit-flips
mtd: rawnand: stm32_fmc2: use timings.mode instead of checking tRC_min
mtd: rawnand: stm32_fmc2: remove unsupported EDO mode
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two ARM fixes:
- Ensure the guest PMU context is restored before the first KVM_RUN,
fixing an issue where EL0 event counting is broken after vCPU
save/restore
- Actually initialize ID_AA64PFR0_EL1.{CSV2,CSV3} based on the
sanitized, system-wide values for protected VMs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Advertise ID_AA64PFR0_EL1.CSV2/3 to protected VMs
KVM: arm64: PMU: Restore the guest's EL0 event counting after migration
Some older processors don't allow BIT(13) and BIT(15) in the current
mask set by "THERM_STATUS_CLEAR_CORE_MASK". This results in:
unchecked MSR access error: WRMSR to 0x19c (tried to
write 0x000000000000aaa8) at rIP: 0xffffffff816f66a6
(throttle_active_work+0xa6/0x1d0)
To avoid unchecked MSR issues, check CPUID for each relevant feature and
use that information to set the supported feature bits only in the
"clear" mask for cores. Do the same for the analogous package mask set
by "THERM_STATUS_CLEAR_PKG_MASK".
Introduce functions thermal_intr_init_core_clear_mask() and
thermal_intr_init_pkg_clear_mask() to set core and package mask bits,
respectively. These functions are called during initialization.
Fixes: 6fe1e64b6026 ("thermal: intel: Prevent accidental clearing of HFI status") Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Link: https://lore.kernel.org/lkml/cdf43fb423368ee3994124a9e8c9b4f8d00712c6.camel@linux.intel.com/T/ Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: 6.2+ <stable@kernel.org> # 6.2+
[ rjw: Renamed 2 funtions and 2 static variables, edited subject and
changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Daniel Vetter [Tue, 4 Apr 2023 19:39:34 +0000 (21:39 +0200)]
fbmem: Reject FB_ACTIVATE_KD_TEXT from userspace
This is an oversight from dc5bdb68b5b3 ("drm/fb-helper: Fix vt
restore") - I failed to realize that nasty userspace could set this.
It's not pretty to mix up kernel-internal and userspace uapi flags
like this, but since the entire fb_var_screeninfo structure is uapi
we'd need to either add a new parameter to the ->fb_set_par callback
and fb_set_par() function, which has a _lot_ of users. Or some other
fairly ugly side-channel int fb_info. Neither is a pretty prospect.
Instead just correct the issue at hand by filtering out this
kernel-internal flag in the ioctl handling code.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Fixes: dc5bdb68b5b3 ("drm/fb-helper: Fix vt restore") Cc: Alex Deucher <alexander.deucher@amd.com> Cc: shlomo@fastmail.com Cc: Michel Dänzer <michel@daenzer.net> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.7+ Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Qiujun Huang <hqjagain@gmail.com> Cc: Peter Rosin <peda@axentia.se> Cc: linux-fbdev@vger.kernel.org Cc: Helge Deller <deller@gmx.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Shigeru Yoshida <syoshida@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230404193934.472457-1-daniel.vetter@ffwll.ch
Jani Nikula [Wed, 1 Mar 2023 15:14:09 +0000 (17:14 +0200)]
drm/i915/dsi: fix DSS CTL register offsets for TGL+
On TGL+ the DSS control registers are at different offsets, and there's
one per pipe. Fix the offsets to fix dual link DSI for TGL+.
There would be helpers for this in the DSC code, but just do the quick
fix now for DSI. Long term, we should probably move all the DSS handling
into intel_vdsc.c, so exporting the helpers seems counter-productive.
Damien Le Moal [Mon, 10 Apr 2023 02:31:11 +0000 (11:31 +0900)]
MAINTAINERS: Change ata maintainer email addresses
Change my email address referenced in the MAINTAINERS file for the ata
subsystem to dlemoal@kernel.org. And while at it, also change other
references for zonefs and the k210 drivers to the same address.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Merge tag 'urgent-rcu.2023.04.07a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"This fixes a pair of bugs in which an improbable but very real
sequence of events can cause kfree_rcu() to be a bit too quick about
freeing the memory passed to it.
It turns out that this pair of bugs is about two years old, and so
this is not a v6.3 regression. However: (1) It just started showing up
in the wild and (2) Its consequences are dire, so its fix needs to go
in sooner rather than later.
Testing is of course being upgraded, and the upgraded tests detect
this situation very quickly. But to the best of my knowledge right
now, the tests are not particularly urgent and will thus most likely
show up in the v6.5 merge window (the one after this coming one).
Kudos to Ziwei Dai and his group for tracking this one down the hard
way!"
* tag 'urgent-rcu.2023.04.07a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu/kvfree: Avoid freeing new kfree_rcu() memory after old grace period
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Some last minute fixes - most of them for regressions"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa_sim_net: complete the initialization before register the device
vdpa/mlx5: Add and remove debugfs in setup/teardown driver
tools/virtio: fix typo in README instructions
vhost-scsi: Fix crash during LUN unmapping
vhost-scsi: Fix vhost_scsi struct use after free
virtio-blk: fix ZBD probe in kernels without ZBD support
virtio-blk: fix to match virtio spec
Merge tag '9p-6.3-fixes-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull 9p fixes from Eric Van Hensbergen:
"These are some collected fixes for the 6.3-rc series that have been
passed our 9p regression tests and been in for-next for at least a
week.
They include a fix for a KASAN reported problem in the extended
attribute handling code and a use after free in the xen transport.
This also includes some updates for the MAINTAINERS file including the
transition of our development mailing list from sourceforge.net to
lists.linux.dev"
* tag '9p-6.3-fixes-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
Update email address and mailing list for v9fs
9p/xen : Fix use after free bug in xen_9pfs_front_remove due to race condition
9P FS: Fix wild-memory-access write in v9fs_get_acl
Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}
Similar to commit d0be8347c623 ("Bluetooth: L2CAP: Fix use-after-free
caused by l2cap_chan_put"), just use l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.
Cc: stable@kernel.org Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Min Li <lm0963hack@gmail.com>
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections") Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
==================================================================
BUG: KASAN: slab-use-after-free in hci_conn_del+0xba/0x3a0
Write of size 8 at addr ffff88800208e9c8 by task iso-tester/31
1 lock held by sco-tester/31:
#0: ffff888001eeb130 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0},
at: sco_sock_getsockopt+0x104/0xa90
Fixes: 248733e87d50 ("Bluetooth: Allow querying of supported offload codecs over SCO socket") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bluetooth: btbcm: Fix logic error in forming the board name.
This patch fixes an incorrect loop exit condition in code that replaces
'/' symbols in the board name. There might also be a memory corruption
issue here, but it is unlikely to be a real problem.
Cc: <stable@vger.kernel.org> Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Zheng Wang [Wed, 8 Mar 2023 16:45:01 +0000 (00:45 +0800)]
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition
In btsdio_probe, the data->work is bound with btsdio_work. It will be
started in btsdio_send_frame.
If the btsdio_remove runs with a unfinished work, there may be a race
condition that hdev is freed but used in btsdio_work. Fix it by
canceling the work before do cleanup in btsdio_remove.
Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Min Li [Sat, 4 Mar 2023 14:23:30 +0000 (22:23 +0800)]
Bluetooth: Fix race condition in hidp_session_thread
There is a potential race condition in hidp_session_thread that may
lead to use-after-free. For instance, the timer is active while
hidp_del_timer is called in hidp_session_thread(). After hidp_session_put,
then 'session' will be freed, causing kernel panic when hidp_idle_timeout
is running.
The solution is to use del_timer_sync instead of del_timer.
Bluetooth: hci_conn: Fix not cleaning up on LE Connection failure
hci_connect_le_scan_cleanup shall always be invoked to cleanup the
states and re-enable passive scanning if necessary, otherwise it may
cause the pending action to stay active causing multiple attempts to
connect.
Fixes: 9b3628d79b46 ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Merge tag 'perf_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix "same task" check when redirecting event output
- Do not wait unconditionally for RCU on the event migration path if
there are no events to migrate
* tag 'perf_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix the same task check in perf_event_set_output
perf: Optimize perf_pmu_migrate_context()
Merge tag 'x86_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a new Intel Arrow Lake CPU model number
- Fix a confusion about how to check the version of the ACPI spec which
supports a "online capable" bit in the MADT table which lead to a
bunch of boot breakages with Zen1 systems and VMs
* tag 'x86_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add model number for Intel Arrow Lake processor
x86/acpi/boot: Correct acpi_is_processor_usable() check
x86/ACPI/boot: Use FADT version to check support for online capable
Merge tag 'cxl-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link (cxl) fixes from Dan Williams:
"Several fixes for driver startup regressions that landed during the
merge window as well as some older bugs.
The regressions were due to a lack of testing with what the CXL
specification calls Restricted CXL Host (RCH) topologies compared to
the testing with Virtual Host (VH) CXL topologies. A VH topology is
typical PCIe while RCH topologies map CXL endpoints as Root Complex
Integrated endpoints. The impact is some driver crashes on startup.
This merge window also added compatibility for range registers (the
mechanism that CXL 1.1 defined for mapping memory) to treat them like
HDM decoders (the mechanism that CXL 2.0 defined for mapping
Host-managed Device Memory). That work collided with the new region
enumeration code that was tested with CXL 2.0 setups, and fails with
crashes at startup.
Lastly, the DOE (Data Object Exchange) implementation for retrieving
an ACPI-like data table from CXL devices is being reworked for v6.4.
Several fixes fell out of that work that are suitable for v6.3.
All of this has been in linux-next for a while, and all reported
issues [1] have been addressed.
Summary:
- Fix several issues with region enumeration in RCH topologies that
can trigger crashes on driver startup or shutdown.
- Fix CXL DVSEC range register compatibility versus region
enumeration that leads to startup crashes
- Fix Data Object Exchange (DOE) workqueue usage vs
CONFIG_DEBUG_OBJECTS warn splats"
Link: http://lore.kernel.org/r/20230405075704.33de8121@canb.auug.org.au
* tag 'cxl-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/hdm: Extend DVSEC range register emulation for region enumeration
cxl/hdm: Limit emulation to the number of range registers
cxl/region: Move coherence tracking into cxl_region_attach()
cxl/region: Fix region setup/teardown for RCDs
cxl/port: Fix find_cxl_root() for RCDs and simplify it
cxl/hdm: Skip emulation when driver manages mem_enable
cxl/hdm: Fix double allocation of @cxlhdm
PCI/DOE: Fix memory leak with CONFIG_DEBUG_OBJECTS=y
PCI/DOE: Silence WARN splat with CONFIG_DEBUG_OBJECTS=y
cxl/pci: Handle excessive CDAT length
cxl/pci: Handle truncated CDAT entries
cxl/pci: Handle truncated CDAT header
cxl/pci: Fix CDAT retrieval on big endian
David S. Miller [Sun, 9 Apr 2023 15:01:28 +0000 (16:01 +0100)]
Merge branch 'sfp-eeprom'
Ivan Bornyakov says:
====================
net: fix EEPROM read of absent SFP module
The patchset is to improve EEPROM read requests when SFP module is
absent.
ChangeLog:
v1:
https://lore.kernel.org/netdev/20230405153900.747-1-i.bornyakov@metrotek.ru/
v2:
* reword commit message of "net: sfp: initialize sfp->i2c_block_size
at sfp allocation"
* add second patch to eliminate excessive I2C transfers in
sfp_module_eeprom() and sfp_module_eeprom_by_page()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Bornyakov [Thu, 6 Apr 2023 13:08:33 +0000 (16:08 +0300)]
net: sfp: avoid EEPROM read of absent SFP module
If SFP module is not present, it is sensible to fail sfp_module_eeprom()
and sfp_module_eeprom_by_page() early to avoid excessive I2C transfers
which are garanteed to fail.
Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Bornyakov [Thu, 6 Apr 2023 13:08:32 +0000 (16:08 +0300)]
net: sfp: initialize sfp->i2c_block_size at sfp allocation
sfp->i2c_block_size is initialized at SFP module insertion in
sfp_sm_mod_probe(). Because of that, if SFP module was never inserted
since boot, sfp_read() call will lead to zero-length I2C read attempt,
and not all I2C controllers are happy with zero-length reads.
One way to issue sfp_read() on empty SFP cage is to execute ethtool -m.
If SFP module was never plugged since boot, there will be a zero-length
I2C read attempt.
# ethtool -m xge0
i2c i2c-3: adapter quirk: no zero length (addr 0x0050, size 0, read)
Cannot get Module EEPROM data: Operation not supported
If SFP module was plugged then removed at least once,
sfp->i2c_block_size will be initialized and ethtool -m will fail with
different exit code and without I2C error
Merge tag '6.3-rc5-smb3-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Two cifs/smb3 client fixes, one for stable:
- double lock fix for a cifs/smb1 reconnect path
- DFS prefixpath fix for reconnect when server moved"
* tag '6.3-rc5-smb3-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: double lock in cifs_reconnect_tcon()
cifs: sanitize paths in cifs_update_super_prepath.
Merge tag 'char-misc-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a small set of various small driver changes for 6.3-rc6.
Included in here are:
- iio driver fixes for reported problems
- coresight hwtracing bugfix for reported problem
- small counter driver bugfixes
All have been in linux-next for a while with no reported problems"
* tag 'char-misc-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
coresight: etm4x: Do not access TRCIDR1 for identification
coresight-etm4: Fix for() loop drvdata->nr_addr_cmp range bug
iio: adc: ti-ads7950: Set `can_sleep` flag for GPIO chip
iio: adc: palmas_gpadc: fix NULL dereference on rmmod
counter: 104-quad-8: Fix Synapse action reported for Index signals
counter: 104-quad-8: Fix race condition between FLAG and CNTR reads
iio: adc: max11410: fix read_poll_timeout() usage
iio: dac: cio-dac: Fix max DAC write value check for 12-bit
iio: light: cm32181: Unregister second I2C client if present
iio: accel: kionix-kx022a: Get the timestamp from the driver's private data in the trigger_handler
iio: adc: ad7791: fix IRQ flags
iio: buffer: make sure O_NONBLOCK is respected
iio: buffer: correctly return bytes written in output buffers
iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
iio: adis16480: select CONFIG_CRC32
drivers: iio: adc: ltc2497: fix LSB shift
iio: adc: qcom-spmi-adc5: Fix the channel name
Merge tag 'tty-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for some reported
problems:
- fsl_uart driver bugfixes
- sh-sci serial driver bugfixes
- renesas serial driver DT binding bugfixes
- 8250 DMA bugfix
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: sh-sci: Fix Rx on RZ/G2L SCI
tty: serial: fsl_lpuart: fix crash in lpuart_uport_is_active
tty: serial: fsl_lpuart: avoid checking for transfer complete when UARTCTRL_SBK is asserted in lpuart32_tx_empty
serial: 8250: Prevent starting up DMA Rx on THRI interrupt
dt-bindings: serial: renesas,scif: Fix 4th IRQ for 4-IRQ SCIFs
tty: serial: sh-sci: Fix transmit end interrupt handler
Merge tag 'usb-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB bugfixes from Greg KH:
"Here are some small USB bugfixes for 6.3-rc6 that have been in my
tree, and in linux-next, for a while. Included in here are:
- new usb-serial driver device ids
- xhci bugfixes for reported problems
- gadget driver bugfixes for reported problems
- dwc3 new device id
All have been in linux-next with no reported problems"
* tag 'usb-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdnsp: Fixes error: uninitialized symbol 'len'
usb: gadgetfs: Fix ep_read_iter to handle ITER_UBUF
usb: gadget: f_fs: Fix ffs_epfile_read_iter to handle ITER_UBUF
usb: typec: altmodes/displayport: Fix configure initial pin assignment
usb: dwc3: pci: add support for the Intel Meteor Lake-S
xhci: Free the command allocated for setting LPM if we return early
Revert "usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS"
xhci: also avoid the XHCI_ZERO_64B_REGS quirk with a passthrough iommu
USB: serial: option: add Quectel RM500U-CN modem
usb: xhci: tegra: fix sleep in atomic call
USB: serial: option: add Telit FE990 compositions
USB: serial: cp210x: add Silicon Labs IFS-USB-DATACABLE IDs
projects / mirror_ubuntu-kernels.git / log