Merge tag 'bsd-user-syscall-2022q2-pull-request' of ssh://github.com/qemu-bsd-user/qemu-bsd-user into staging
bsd-user: Next round of syscalls
Implement the next round of system calls. These are open, openat, close,
fdatasync, fsync, close_from, revoke, access, eacccess, facccessat, chdir,
fchdir, rename, renameat, mkdir, mkdirat, rmdir, _getcwd, dup, dup2, truncate,
ftruncate, acct and sync. In addition, the helper functions needed for these to
work are included. With the helper functions, all of these system calls are the
'obvious' wrapper...
# -----BEGIN PGP SIGNATURE-----
# Comment: GPGTools - https://gpgtools.org
#
# iQIzBAABCgAdFiEEIDX4lLAKo898zeG3bBzRKH2wEQAFAmKvZSwACgkQbBzRKH2w
# EQCrdxAA0UeXmh/l1znPSrX4lif7Vhe4H5TdmHavGQX0p7B+dMd160SMLfKFJt7J
# HHXuQZbPFNuwqE5qiFPTcXIFjT5tq2WSjd9ZC/ZexfzBJIICwcUWuWvG2WfCA3fD
# hth/Ru2fX0vUwoUwvYw7lTPnhb9o52Z1rf5AEFu85E3UjKWEcARHCakm7n8a+Cg+
# PkF1qZ/qFic+bkBZkZLWyHB5qR2p2sIp+VHwlG1ew39Xim457kynQOoF8etIXc1Y
# g5PrjePUsVhPR7qm4CFplM4UOyGOOqIykHERppaXKtk2+kP8dp9HWog9Z/IFVOKc
# z3huDtf03UtmohjdJBYkpCcCzmd2EETRPgkFaVT5ciVGMb3Nom1b2/DOnndpS9qb
# TdE7J6Ek1vp4Mr386QHzm6AfdoHGZc4tH+SpDQZrsWbnugklYnQd3++GCqj8D2rA
# LJ8oWInviZP8xWDn5q1sXCNw/lgVup9ZNrMl7TcXmQDZXHSW1tElIAT2PZCebman
# rSwg/umr7fPOXdIAkLhF77bAt3J3kAzxhuYwHEstB3kRXEJ2VinLMf3BJBrGLnuK
# kr6kJy6hw7luIT5nUNLrrNtwsAAwEu6S7OSGhEiGaUSIhiER96k/tX2u/KOBtwGC
# VzIP7vK5V2xYPepyj4tXkVRHkjxxw3s8fYRXf73IsaZ6Avot8pg=
# =JmJY
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 19 Jun 2022 11:04:28 AM PDT
# gpg: using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* tag 'bsd-user-syscall-2022q2-pull-request' of ssh://github.com/qemu-bsd-user/qemu-bsd-user:
bsd-user: Implement acct and sync
bsd-user: Implement trunctate and ftruncate
bsd-user: Implement dup and dup2
bsd-user: Implement rmdir and undocumented __getcwd
bsd-user: Implement mkdir and mkdirat
bsd-user: Implement link, linkat, unlink and unlinkat
bsd-user: Implement rename and renameat
bsd-user: Implement chdir and fchdir
bsd-user: Implement revoke, access, eaccess and faccessat
bsd-user: Implement fdatasync, fsync and close_from
bsd-user: Implement open, openat and close
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes,cleanups,features
more CXL patches
RSA support for crypto
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKrYLMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpwpwH/2IS+V7wS3q/XXPz1HndJLpUP/z+mkeu9W6+
# X1U9CJ+66Ag4eD5T/jzoN0JEjiTeET/3xM+PY5NYZCh6QTAmA7EfFZv99oNWpGd1
# +nyxOdaMDPSscOKjLfDziVTi/QYIZBtU6TeixL9whkipYCqmgbs5gXV8ynltmKyF
# bIJVeaXm5yQLcCTGzKzdXf+HmTErpEGDCDHFjzrLVjICRDdekElGVwYTn+ycl7p7
# oLsWWVDgqo0p86BITlrHUXUrxTXF3wyg2B59cT7Ilbb3o+Fa2GsP+o9IXMuVoNNp
# A+zrq1QZ49UO3XwkS03xDDioUQ1T/V0L4w9dEfaGvpY4Horv0HI=
# =PvmT
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 16 Jun 2022 09:56:19 AM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
acpi/erst: fix fallthrough code upon validation failure
vhost: also check queue state in the vhost_dev_set_log error routine
crypto: Introduce RSA algorithm
virtio-iommu: Add an assert check in translate routine
virtio-iommu: Use recursive lock to avoid deadlock
virtio-iommu: Add bypass mode support to assigned device
virtio/vhost-user: Fix wrong vhost notifier GPtrArray size
docs/cxl: Add switch documentation
pci-bridge/cxl_downstream: Add a CXL switch downstream port
pci-bridge/cxl_upstream: Add a CXL switch upstream port
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Ani Sinha [Fri, 13 May 2022 14:10:05 +0000 (19:40 +0530)]
acpi/erst: fix fallthrough code upon validation failure
At any step when any validation fail in check_erst_backend_storage(), there is
no need to continue further through other validation checks. Further, by
continuing even when record_size is 0, we run the risk of triggering a divide
by zero error if we continued with other validation checks. Hence, we should
simply return from this function upon validation failure.
CC: Peter Maydell <peter.maydell@linaro.org> CC: Eric DeVolder <eric.devolder@oracle.com> Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220513141005.1929422-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric DeVolder <eric.devolder@oracle.com>
Ni Xun [Thu, 9 Jun 2022 13:10:12 +0000 (21:10 +0800)]
vhost: also check queue state in the vhost_dev_set_log error routine
When check queue state in the vhost_dev_set_log routine, it miss the error
routine check, this patch also check queue state in error case.
Fixes: 1e5a050f5798 ("check queue state in the vhost_dev_set_log routine") Signed-off-by: Ni Xun <richardni@tencent.com> Reviewed-by: Zhigang Lu <tonnylu@tencent.com>
Message-Id: <OS0PR01MB57139163F3F3955960675B52EAA79@OS0PR01MB5713.jpnprd01.prod.outlook.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
zhenwei pi [Sat, 11 Jun 2022 06:42:43 +0000 (14:42 +0800)]
crypto: Introduce RSA algorithm
There are two parts in this patch:
1, support akcipher service by cryptodev-builtin driver
2, virtio-crypto driver supports akcipher service
In principle, we should separate this into two patches, to avoid
compiling error, merge them into one.
Then virtio-crypto gets request from guest side, and forwards the
request to builtin driver to handle it.
Test with a guest linux:
1, The self-test framework of crypto layer works fine in guest kernel
2, Test with Linux guest(with asym support), the following script
test(note that pkey_XXX is supported only in a newer version of keyutils):
- both public key & private key
- create/close session
- encrypt/decrypt/sign/verify basic driver operation
- also test with kernel crypto layer(pkey add/query)
All the cases work fine.
Run script in guest:
rm -rf *.der *.pem *.pfx
modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
rm -rf /tmp/data
dd if=/dev/random of=/tmp/data count=1 bs=20
Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Zhenzhong Duan [Mon, 13 Jun 2022 06:10:10 +0000 (14:10 +0800)]
virtio-iommu: Add an assert check in translate routine
With address space switch supported, dma access translation only
happen after endpoint is attached to a non-bypass domain.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220613061010.2674054-4-zhenzhong.duan@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Zhenzhong Duan [Mon, 13 Jun 2022 06:10:09 +0000 (14:10 +0800)]
virtio-iommu: Use recursive lock to avoid deadlock
When switching address space with mutex lock hold, mapping will be
replayed for assigned device. This will trigger relock deadlock.
Also release the mutex resource in unrealize routine.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220613061010.2674054-3-zhenzhong.duan@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Zhenzhong Duan [Mon, 13 Jun 2022 06:10:08 +0000 (14:10 +0800)]
virtio-iommu: Add bypass mode support to assigned device
Currently assigned devices can not work in virtio-iommu bypass mode.
Guest driver fails to probe the device due to DMA failure. And the
reason is because of lacking GPA -> HPA mappings when VM is created.
Add a root container memory region to hold both bypass memory region
and iommu memory region, so the switch between them is supported
just like the implementation in virtual VT-d.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220613061010.2674054-2-zhenzhong.duan@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In fetch_or_create_notifier, idx begins with 0. So the GPtrArray size
should be idx + 1 and g_ptr_array_set_size should be called with idx + 1.
This wrong GPtrArray size causes fetch_or_create_notifier return an invalid
address. Passing this invalid pointer to vhost_user_host_notifier_remove
causes assert fail:
qemu/include/qemu/int128.h:27: int128_get64: Assertion `r == a' failed.
shutting down, reason=crashed
Backends like dpdk-vdpa which sends out vhost notifier requests almost always
hit qemu crash.
Fixes: 503e355465 ("virtio/vhost-user: dynamically assign VhostUserHostNotifiers") Signed-off-by: Yajun Wu <yajunw@nvidia.com> Acked-by: Parav Pandit <parav@nvidia.com>
Change-Id: I87e0f7591ca9a59d210879b260704a2d9e9d6bcd
Message-Id: <20220526034851.683258-1-yajunw@nvidia.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Jonathan Cameron [Thu, 16 Jun 2022 14:51:26 +0000 (15:51 +0100)]
docs/cxl: Add switch documentation
Switches were already introduced, but now we support them update
the documentation to provide an example in diagram and
qemu command line parameter forms.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220616145126.8002-4-Jonathan.Cameron@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jonathan Cameron [Thu, 16 Jun 2022 14:51:25 +0000 (15:51 +0100)]
pci-bridge/cxl_downstream: Add a CXL switch downstream port
Emulation of a simple CXL Switch downstream port.
The Device ID has been allocated for this use.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220616145126.8002-3-Jonathan.Cameron@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jonathan Cameron [Thu, 16 Jun 2022 14:51:24 +0000 (15:51 +0100)]
pci-bridge/cxl_upstream: Add a CXL switch upstream port
An initial simple upstream port emulation to allow the creation
of CXL switches. The Device ID has been allocated for this use.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220616145126.8002-2-Jonathan.Cameron@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Merge tag 'pull-9p-20220616' of https://github.com/cschoenebeck/qemu into staging
9pfs: fix 'Twalk' protocol violation
Actual fix is patch 5, whereas patch 4 being preparatory, all other
patches are test cases to guard this Twalk issue.
# -----BEGIN PGP SIGNATURE-----
#
# iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAmKrDSAXHHFlbXVfb3Nz
# QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5VgoQ//bA/lXYa6hds4f73+opq7iiJ/
# 88gnJO8uPctNWXJ5f6ufXcTFtC99QRcl97jgSQhSIUdaZCfcpg7Pq3fONc060cMt
# MNxi5Da31Fq7xz4UhSQHgWlgAfomfClYoBSOtrrxjVbXChA2rB7FXhD9aewimUtt
# TlolXdJuPbGR3F6H0glN1itij12Ay5c0DMqFPy5npYlzjNhxmPb8QgFZ8E+lxhcT
# hG+OMmS9O5Mk7WKYWC1Iij7tWm45RbThPEUsfCPt6jIJYQqheOQs0ohJG9wyCZu3
# JUCgSBPG1nNY0hgBJ/X7un7e89BoRw8edwqP+sSigfDf+LquUggqRFgz+joTbfvj
# Prq+1NTDIckDRZF6CDUSkZE3+Gq3qlIhw/2vS+bjYZrk04lP4x8d9JYPSkT3i8xc
# +YT/apDUkT68FjJ6PudfS2j6xRtYt86nOuWuhYukTZ2z5FJ0c9XAJlJX2ZS9Az3n
# AqKFCT+8UE4VYKnAJ61xDdqvAdEmKJUi5YutfuwH+j6sS4peLX0gg8mGlNi7y8JK
# bsqNjE1ve8rkp24DuUoHmivs/m1ogJi9Jxp5IjB4d26MPhgojrxOpaYUVg98QS7d
# os2ES47CSn4KFxqsFMZnZpgzKxIvRQ4C9bBbSClDOffHWHRJub6PCw5F9eCTH4dO
# z/QPJ+smDY7bolF+gSg=
# =3ejn
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 16 Jun 2022 03:59:44 AM PDT
# gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395
* tag 'pull-9p-20220616' of https://github.com/cschoenebeck/qemu:
tests/9pfs: check fid being unaffected in fs_walk_2nd_nonexistent
tests/9pfs: guard recent 'Twalk' behaviour fix
9pfs: fix 'Twalk' to only send error if no component walked
9pfs: refactor 'name_idx' -> 'nwalked' in v9fs_walk()
tests/9pfs: compare QIDs in fs_walk_none() test
tests/9pfs: Twalk with nwname=0
tests/9pfs: walk to non-existent dir
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* statistics subsystem
* virtio reset cleanups
* build system cleanups
* fix Cirrus CI
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKpooQUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNlFwf+OugLGRZl3KVc7akQwUJe9gg2T31h
# VkC+7Tei8FAwe8vDppVd+CYEIi0M3acxD2amRrv2etCCGSuySN1PbkfRcSfPBX01
# pRWpasdhfqnZR8Iidi7YW1Ou5CcGqKH49nunBhW10+osb/mu5sVscMuOJgTDj/lK
# CpsmDyk6572yGmczjNLlmhYcTU36clHpAZgazZHwk1PU+B3fCKlYYyvUpT3ItJvd
# cK92aIUWrfofl3yTy0k4IwvZwNjTBirlstOIomZ333xzSA+mm5TR+mTvGRTZ69+a
# v+snpMp4ILDMoB5kxQ42kK5WpdiN//LnriA9CBFDtOidsDDn8kx7gJe2RA==
# =Dxwa
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 Jun 2022 02:12:36 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (21 commits)
build: include pc-bios/ part in the ROMS variable
meson: put cross compiler info in a separate section
q35：Enable TSEG only when G_SMRAME and TSEG_EN both enabled
build: fix check for -fsanitize-coverage-allowlist
tests/vm: allow running tests in an unconfigured source tree
configure: cleanup -fno-pie detection
configure: update list of preserved environment variables
virtio-mmio: cleanup reset
virtio: stop ioeventfd on reset
virtio-mmio: stop ioeventfd on legacy reset
s390x: simplify virtio_ccw_reset_virtio
block: add more commands to preconfig mode
hmp: add filtering of statistics by name
qmp: add filtering of statistics by name
hmp: add filtering of statistics by provider
qmp: add filtering of statistics by provider
hmp: add basic "info stats" implementation
cutils: add functions for IEC and SI prefixes
qmp: add filtering of statistics by target vCPU
kvm: Support for querying fd-based stats
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tests/9pfs: check fid being unaffected in fs_walk_2nd_nonexistent
Extend previously added test case by checking that fid was unaffected
by 'Twalk' request (i.e. when 2nd path component of request being
invalid). Do that by subsequently sending a 'Tgetattr' request with
the fid previously used for 'Twalk'; that 'Tgetattr' request should
return an 'Rlerror' response by 9p server with error code ENOENT as
that fid is basically invalid.
And as we are at it, also check that the QID returned by 'Twalk' is
not identical to the root node's QID.
Previous 9p patch fixed 'Twalk' request handling, which was previously not
behaving as specified by the 9p2000 protocol spec. This patch adds a new test
case which guards the new 'Twalk' behaviour in question.
More specifically: it sends a 'Twalk' request where the 1st path component
is valid, whereas the 2nd path component transmitted to server does not
exist. The expected behaviour is that 9p server would respond by sending
a 'Rwalk' response with exactly 1 QID (instead of 'Rlerror' response).
9pfs: fix 'Twalk' to only send error if no component walked
Current implementation of 'Twalk' request handling always sends an 'Rerror'
response if any error occured. The 9p2000 protocol spec says though:
"
If the first element cannot be walked for any reason, Rerror is returned.
Otherwise, the walk will return an Rwalk message containing nwqid qids
corresponding, in order, to the files that are visited by the nwqid
successful elementwise walks; nwqid is therefore either nwname or the index
of the first elementwise walk that failed.
"
For that reason we are no longer leaving from an error path in function
v9fs_walk(), unless really no path component could be walked successfully or
if the request has been interrupted.
Local variable 'nwalked' counts and reflects the number of path components
successfully processed by background I/O thread, whereas local variable
'name_idx' subsequently counts and reflects the number of path components
eventually accepted successfully by 9p server controller portion.
New local variable 'any_err' is an aggregate variable reflecting whether any
error occurred at all, while already existing variable 'err' only reflects
the last error.
Despite QIDs being delivered to client in a more relaxed way now, it is
important to note though that fid still must remain unaffected if any error
occurred.
9pfs: refactor 'name_idx' -> 'nwalked' in v9fs_walk()
The local variable 'name_idx' is used in two loops in function v9fs_walk().
Let the first loop use its own variable 'nwalked' instead, which we will
use in subsequent patch as the number of (requested) path components
successfully walked by background I/O thread.
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
This pull request includes an important aio=native I/O stall fix, the
experimental vifo-user server, the io_uring_register_ring_fd() optimization for
aio=io_uring, and an update to Vladimir Sementsov-Ogievskiy's maintainership
details.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmKp/+AACgkQnKSrs4Gr
# c8gg9wf/ZG1+eGR2NA0T1szlhtgy2bnp95hrLbKzP7tVxueFq7QCcsIsLGWqfnMd
# RREUi6Tgx1v7Agk2oIyUcrjn5rt4LPVOKolVbK6e5Pyou2/Sf/ApkhRjRnzzfACE
# J56H8gPU7fS4/8sJYCYGlWEr7pMmJMVJFPl2tNsErPwuZMSjo27n6UqDE/ZSZF1p
# w1a+cwo+6YSjtJg4AFB/+izBam4+U6w1YhgZM6p6hx5a7GLoq/w59W6Yb119GANO
# tg5qzmSHtMKTieORJmYAt83T1xS5d/iyca4w1PiYQxJsHsqwAaPpoyEhgGT+u+CA
# hfb3HDdQCFyVKwlKD5H1a+WD/Hr11w==
# =zcl8
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 Jun 2022 08:50:56 AM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
linux-aio: explain why max batch is checked in laio_io_unplug()
linux-aio: fix unbalanced plugged counter in laio_io_unplug()
vfio-user: handle reset of remote device
vfio-user: handle device interrupts
vfio-user: handle PCI BAR accesses
vfio-user: handle DMA mappings
vfio-user: IOMMU support for remote device
vfio-user: handle PCI config space accesses
vfio-user: run vfio-user context
vfio-user: find and init PCI device
vfio-user: instantiate vfio-user context
vfio-user: define vfio-user-server object
vfio-user: build library
remote/machine: add vfio-user property
remote/machine: add HotplugHandler for remote machine
qdev: unplug blocker for devices
Use io_uring_register_ring_fd() to skip fd operations
MAINTAINERS: update Vladimir's address and repositories
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Stefan Hajnoczi [Thu, 9 Jun 2022 16:47:11 +0000 (17:47 +0100)]
linux-aio: fix unbalanced plugged counter in laio_io_unplug()
Every laio_io_plug() call has a matching laio_io_unplug() call. There is
a plugged counter that tracks the number of levels of plugging and
allows for nesting.
The plugged counter must reflect the balance between laio_io_plug() and
laio_io_unplug() calls accurately. Otherwise I/O stalls occur since
io_submit(2) calls are skipped while plugged.
Reported-by: Nikolay Tenev <nt@storpool.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20220609164712.1539045-2-stefanha@redhat.com Cc: Stefano Garzarella <sgarzare@redhat.com> Fixes: 68d7946648 ("linux-aio: add `dev_max_batch` parameter to laio_io_unplug()")
[Stefano Garzarella suggested adding a Fixes tag.
--Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 112eeadf3bc4c6cdb100bc3f9a6fcfc20b467c1b.1655151679.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Message-id: 9523479eaafe050677f4de2af5dd0df18c27cfd9.1655151679.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Determine the BARs used by the PCI device and register handlers to
manage the access to the same.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 3373e10b5be5f42846f0632d4382466e1698c505.1655151679.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Define and register callbacks to manage the RAM regions used for
device DMA
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: faacbcd45c4d02c591f0dbfdc19041fbb3eae7eb.1655151679.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Assign separate address space for each device in the remote processes.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: afe0b0a97582cdad42b5b25636a29c523265a10a.1655151679.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Define and register handlers for PCI config space accesses
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: be9d2ccf9b1d24e50dcd9c23404dbf284142cec7.1655151679.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Setup a handler to run vfio-user context. The context is driven by
messages to the file descriptor associated with it - get the fd for
the context and hook up the handler with it
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: e934b0090529d448b6a7972b21dfc3d7421ce494.1655151679.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Find the PCI device with specified id. Initialize the device context
with the QEMU PCI device
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 7798dbd730099b33fdd00c4c202cfe79e5c5c151.1655151679.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
create a context with the vfio-user library to run a PCI device
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: a452871ac8c812ff96fc4f0ce6037f4769953fab.1655151679.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Define vfio-user object which is remote process server for QEMU. Setup
object initialization functions and properties necessary to instantiate
the object
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: e45a17001e9b38f451543a664ababdf860e5f2f2.1655151679.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
add the libvfio-user library as a submodule. build it as a meson
subproject.
libvfio-user is distributed with BSD 3-Clause license and
json-c with MIT (Expat) license
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: c2adec87958b081d1dc8775d4aa05c897912f025.1655151679.git.jag.raman@oracle.com
[Changed submodule URL to QEMU's libvfio-user mirror on GitLab. The QEMU
project mirrors its dependencies so that it can provide full source code
even in the event that its dependencies become unavailable. Note that
the mirror repo is manually updated, so please contact me to make newer
libvfio-user commits available. If I become a bottleneck we can set up a
cronjob.
Updated scripts/meson-buildoptions.sh to match the meson_options.txt
change. Failure to do so can result in scripts/meson-buildoptions.sh
being modified by the build system later on and you end up with a dirty
working tree.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add vfio-user to x-remote machine. It is a boolean, which indicates if
the machine supports vfio-user protocol. The machine configures the bus
differently vfio-user and multiprocess protocols, so this property
informs it on how to configure the bus.
This property should be short lived. Once vfio-user fully replaces
multiprocess, this property could be removed.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 5d51a152a419cbda35d070b8e49b772b60a7230a.1655151679.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
remote/machine: add HotplugHandler for remote machine
Allow hotplugging of PCI(e) devices to remote machine
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: d1e6cfa0afb528ad343758f9b1d918be0175c5e5.1655151679.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
TYPE_VFIO_USER_SERVER, which is introduced shortly, attaches itself to a
PCIDevice on which it depends. If the attached PCIDevice gets removed
while the server in use, it could cause it crash. To prevent this,
TYPE_VFIO_USER_SERVER adds an unplug blocker for the PCIDevice.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: c41ef80b7cc063314d629737bed2159e5713f2e0.1655151679.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sam Li [Tue, 31 May 2022 10:50:11 +0000 (18:50 +0800)]
Use io_uring_register_ring_fd() to skip fd operations
Linux recently added a new io_uring(7) optimization API that QEMU
doesn't take advantage of yet. The liburing library that QEMU uses
has added a corresponding new API calling io_uring_register_ring_fd().
When this API is called after creating the ring, the io_uring_submit()
library function passes a flag to the io_uring_enter(2) syscall
allowing it to skip the ring file descriptor fdget()/fdput()
operations. This saves some CPU cycles.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20220531105011.111082-1-faithilikerun@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
MAINTAINERS: update Vladimir's address and repositories
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-id: 20220526115432.138384-1-vsementsov@yandex-team.ru Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Paolo Bonzini [Wed, 13 Apr 2022 13:22:01 +0000 (15:22 +0200)]
build: include pc-bios/ part in the ROMS variable
Include the full path in TARGET_DIR, so that messages from sub-Makefiles
are clearer. Also, prepare for possibly building firmware outside
pc-bios/ from the Makefile,
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zhenzhong Duan [Wed, 15 Jun 2022 03:45:01 +0000 (11:45 +0800)]
q35：Enable TSEG only when G_SMRAME and TSEG_EN both enabled
According to spec:
"TSEG Enable (T_EN): Enabling of SMRAM memory for Extended SMRAM space
only. When G_SMRAME = 1 and TSEG_EN = 1, the TSEG is enabled to appear
in the appropriate physical address space. Note that once D_LCK is set,
this bit becomes read only."
Changed to match the spec description.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220615034501.2733802-1-zhenzhong.duan@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
build: fix check for -fsanitize-coverage-allowlist
The existing check has two problems:
1. Meson uses a private directory for the get_supported_arguments check.
./instrumentation-filter does not exist in that private directory (it is
copied into the root of the build-directory).
2. fsanitize-coverage-allowlist is unused when coverage instrumentation
is not configured. No instrumentation are passed for the
get_supported_arguments check
Thus the check always fails. To work around this, change the check to an
"if cc.compiles" check and provide /dev/null, instead of the real
filter.
Error:
error: argument unused during compilation:
'-fsanitize-coverage-allowlist=instrumentation-filter'
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20220614155415.4023833-1-alxndr@bu.edu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 14 Jun 2022 16:36:34 +0000 (18:36 +0200)]
tests/vm: allow running tests in an unconfigured source tree
tests/vm/Makefile.include used to assume that it could run in an unconfigured
source tree, and Cirrus CI relies on that. It was however broken by commit f4c66f1705 ("tests: use tests/venv to run basevm.py-based scripts", 2022-06-06),
which co-opted the virtual environment being used by avocado tests
to also run the basevm.py tests.
For now, reintroduce the usage of qemu.qmp from the source directory, but
without the sys.path() hacks. The CI configuration can be changed to
install the package via pip when qemu.qmp is removed from the source tree.
Cc: John Snow <jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 29 Mar 2022 11:07:25 +0000 (13:07 +0200)]
configure: cleanup -fno-pie detection
Place it only inside the 'if test "$pie" = "no"' conditional. Since
commit 43924d1e53 ("pc-bios/optionrom: detect -fno-pie", 2022-05-12),
the PIE options are detected independently by pc-bios/optionrom/Makefile,
and the CFLAGS_NOPIE/LDFLAGS_NOPIE variables are not used anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 9 Jun 2022 06:54:54 +0000 (08:54 +0200)]
virtio-mmio: cleanup reset
Make virtio_mmio_soft_reset reset the virtio device, which is performed by
both the "soft" and the "hard" reset; and then call virtio_mmio_soft_reset
from virtio_mmio_reset to emphasize that the latter is a superset of the
former.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 9 Jun 2022 06:41:14 +0000 (08:41 +0200)]
virtio: stop ioeventfd on reset
All calls to virtio_bus_reset are preceded by virtio_bus_stop_ioeventfd,
move the call in virtio_bus_reset: that makes sense and clarifies
that the vdc->reset function is called with ioeventfd already stopped.
Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 9 Jun 2022 06:49:21 +0000 (08:49 +0200)]
virtio-mmio: stop ioeventfd on legacy reset
If the queue PFN is set to zero on a virtio-mmio device, the device is reset.
In that case however the virtio_bus_stop_ioeventfd function was not
called; add it so that the behavior is similar to when status is set to 0.
Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 3 Nov 2020 09:37:20 +0000 (04:37 -0500)]
block: add more commands to preconfig mode
Of the block device commands, those that are available outside system
emulators do not require a fully constructed machine by definition.
Allow running them before machine initialization has concluded.
Of the ones that are available inside system emulation, allow querying
the PR managers, and setting up accounting and throttling.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 26 Apr 2022 12:09:31 +0000 (14:09 +0200)]
hmp: add filtering of statistics by name
Allow the user to request only a specific subset of statistics.
This can be useful when working on a feature or optimization that is
known to affect that statistic.
Paolo Bonzini [Tue, 24 May 2022 17:13:16 +0000 (19:13 +0200)]
qmp: add filtering of statistics by name
Allow retrieving only a subset of statistics. This can be useful
for example in order to plot a subset of the statistics many times
a second: KVM publishes ~40 statistics for each vCPU on x86; retrieving
and serializing all of them would be useless.
Another use will be in HMP in the following patch; implementing the
filter in the backend is easy enough that it was deemed okay to make
this a public interface.
Paolo Bonzini [Tue, 26 Apr 2022 09:49:33 +0000 (11:49 +0200)]
qmp: add filtering of statistics by provider
Allow retrieving the statistics from a specific provider only.
This can be used in the future by HMP commands such as "info
sync-profile" or "info profile". The next patch also adds
filter-by-provider capabilities to the HMP equivalent of
query-stats, "info stats".
The QAPI is a bit more verbose than just a list of StatsProvider,
so that it can be subsequently extended with filtering of statistics
by name.
If a provider is specified more than once in the filter, each request
will be included separately in the output.
Extracted from a patch by Mark Kanda.
Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mark Kanda [Tue, 26 Apr 2022 10:17:35 +0000 (12:17 +0200)]
hmp: add basic "info stats" implementation
Add an HMP command to retrieve statistics collected at run-time.
The command will retrieve and print either all VM-level statistics,
or all vCPU-level statistics for the currently selected CPU.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 26 Apr 2022 12:59:44 +0000 (14:59 +0200)]
qmp: add filtering of statistics by target vCPU
Introduce a simple filtering of statistics, that allows to retrieve
statistics for a subset of the guest vCPUs. This will be used for
example by the HMP monitor, in order to retrieve the statistics
for the currently selected CPU.
Mark Kanda [Tue, 15 Feb 2022 15:04:31 +0000 (09:04 -0600)]
qmp: Support for querying stats
Gathering statistics is important for development, for monitoring and
for performance measurement. There are tools such as kvm_stat that do
this and they rely on the _user_ knowing the interesting data points
rather than the tool (which can treat them as opaque).
The commands introduced in this commit introduce QMP support for
querying stats; the goal is to take the capabilities of these tools
and making them available throughout the whole virtualization stack,
so that one can observe, monitor and measure virtual machines without
having shell access + root on the host that runs them.
query-stats returns a list of all stats per target type (only VM
and vCPU to start); future commits add extra options for specifying
stat names, vCPU qom paths, and providers. All these are used by the
HMP command "info stats". Because of the development usecases around
statistics, a good HMP interface is important.
query-stats-schemas returns a list of stats included in each target
type, with an option for specifying the provider. The concepts in the
schema are based on the KVM binary stats' own introspection data, just
translated to QAPI.
There are two reasons to have a separate schema that is not tied to
the QAPI schema. The first is the contents of the schemas: the new
introspection data provides different information than the QAPI data,
namely unit of measurement, how the numbers are gathered and change
(peak/instant/cumulative/histogram), and histogram bucket sizes.
There's really no reason to have this kind of metadata in the QAPI
introspection schema (except possibly for the unit of measure, but
there's a very weak justification).
Another reason is the dynamicity of the schema. The QAPI introspection
data is very much static; and while QOM is somewhat more dynamic,
generally we consider that to be a bug rather than a feature these days.
On the other hand, the statistics that are exposed by QEMU might be
passed through from another source, such as KVM, and the disadvantages of
manually updating the QAPI schema for outweight the benefits from vetting
the statistics and filtering out anything that seems "too unstable".
Running old QEMU with new kernel is a supported usecase; if old QEMU
cannot expose statistics from a new kernel, or if a kernel developer
needs to change QEMU before gathering new info from the new kernel,
then that is a poor user interface.
The framework provides a method to register callbacks for these QMP
commands. Most of the work in fact is done by the callbacks, and a
large majority of this patch is new QAPI structs and commands.
Signed-off-by: Mark Kanda <mark.kanda@oracle.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Warner Losh [Sun, 12 Jun 2022 14:23:57 +0000 (08:23 -0600)]
bsd-user: Implement rmdir and undocumented __getcwd
Implemenet rmdir and __getcwd. __getcwd is the undocumented
back end to getcwd(3).
Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Merge tag 'kraxel-20220614-pull-request' of git://git.kraxel.org/qemu into staging
usb: add CanoKey device, fixes for ehci + redir
ui: fixes for gtk and cocoa, rework refresh rate
virtio-gpu: scanout flush fix
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmKoe/8ACgkQTLbY7tPo
# cTgZqw/9HD5dMjP74jwrf14dSCR6FD8PfSZU43YBZtMKMtYIzSgrG0NGmreDIhmr
# ZM+G0By+J8vFaSqDukX31077DnptyrxsANOg3zc28SfOCrI7I/mNVymd9hl+Ydpd
# A7h0DpHxs1mkpTVxGoXZoJRGXUE41rctbFVjG3CGynSG9K2vFQRsJz0jG723dg5Y
# uv+Di1WkhqNkyKNsTEGbz9LNqtdtGzvQm3COBpKoTsl4X3EXIE68Qh7i3cMTSNIw
# KKPARW3oiCOy3Fc4kQW9nSxkkHMS6NPL1uyQ52j7pXYxRdxRaREFQ9Gxst3ie9bS
# mbqSuzS2+1v0w37bq9wE0PiCkmwWnu2KWiWWkAIYlmmZTgHvgxCvPcJaeItmap27
# dsAuPUGBbhhrmUwfMgJXp/wRvoZQc2l9w9+eUklsbI+VTbr6i+r/OoLRmnDJr+K/
# yNscMU1LzoigK0NDdP+PnFl3k8pux0Awtotgfyd+UGTSW8a5L6UFAWIxcUcd0Jjv
# 24jAEEc1S1ciDxJDWYn4+17KJARG7no2PRXsGXCUNaWduGEk8wPK+i6Xk82U36o7
# 7j0N16RFNv1YSUaUJHgtmAMRJIQMCiB42VaYxlDfzKupvq2RgRWaWBD/HozgLhXn
# DjEX+JRAnaOYnn1NURzTNDwnhQethJRXI1ntI1U8IFLYT4baSCY=
# =L5PO
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 14 Jun 2022 05:15:59 AM PDT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [undefined]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [undefined]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* tag 'kraxel-20220614-pull-request' of git://git.kraxel.org/qemu:
virtio-gpu: Respect UI refresh rate for EDID
ui: Deliver refresh rate via QemuUIInfo
ui/console: Do not return a value with ui_info
virtio-gpu: update done only on the scanout associated with rect
usbredir: avoid queuing hello packet on snapshot restore
hw/usb/hcd-ehci: fix writeback order
MAINTAINERS: add myself as CanoKey maintainer
docs/system/devices/usb: Add CanoKey to USB devices examples
docs: Add CanoKey documentation
meson: Add CanoKey
hw/usb/canokey: Add trace events
hw/usb: Add CanoKey Implementation
ui/cocoa: Fix poweroff request code
ui/gtk-gl-area: create the requested GL context version
ui/gtk-gl-area: implement GL context destruction
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Akihiko Odaki [Sat, 26 Feb 2022 11:55:15 +0000 (20:55 +0900)]
ui: Deliver refresh rate via QemuUIInfo
This change adds a new member, refresh_rate to QemuUIInfo in
include/ui/console.h. It represents the refresh rate of the
physical display backend, and it is more appropriate than
GUI update interval as the refresh rate which the emulated device
reports:
- sdl may set GUI update interval shorter than the refresh rate
of the physical display to respond to user-generated events.
- sdl and vnc aggressively changes GUI update interval, but
a guests is typically not designed to respond to frequent
refresh rate changes, or frequent "display mode" changes in
general. The frequency of refresh rate changes of the physical
display backend matches better to the guest's expectation.
QemuUIInfo also has other members representing "display mode",
which makes it suitable for refresh rate representation. It has
a throttling of update notifications, and prevents frequent changes
of the display mode.
Joelle van Dyne [Sat, 7 May 2022 04:18:50 +0000 (21:18 -0700)]
usbredir: avoid queuing hello packet on snapshot restore
When launching QEMU with "-loadvm", usbredir_create_parser() should avoid
setting up the hello packet (just as with "-incoming". On the latest version
of libusbredir, usbredirparser_unserialize() will return error if the parser
is not "pristine."
Arnout Engelen [Sun, 8 May 2022 15:32:22 +0000 (17:32 +0200)]
hw/usb/hcd-ehci: fix writeback order
The 'active' bit passes control over a qTD between the guest and the
controller: set to 1 by guest to enable execution by the controller,
and the controller sets it to '0' to hand back control to the guest.
ehci_state_writeback write two dwords to main memory using DMA:
the third dword of the qTD (containing dt, total bytes to transfer,
cpage, cerr and status) and the fourth dword of the qTD (containing
the offset).
This commit makes sure the fourth dword is written before the third,
avoiding a race condition where a new offset written into the qTD
by the guest after it observed the status going to go to '0' gets
overwritten by a 'late' DMA writeback of the previous offset.
This race condition could lead to 'cpage out of range (5)' errors,
and reproduced by:
(press a key, select 'Installation' (2), and accept the default
values. On my machine the 'cpage out of range' is reproduced while
loading the Linux Kernel about once per 7 attempts. With the fix in
this commit it no longer fails)
This problem was previously reported as a seabios problem in
https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/thread/OUTHT5ISSQJGXPNTUPY3O5E5EPZJCHM3/
and as a nixos CI build failure in
https://github.com/NixOS/nixpkgs/issues/170803
This commit added a new emulated device called CanoKey to QEMU.
CanoKey implements platform independent features in canokey-core
https://github.com/canokeys/canokey-core, and leaves the USB implementation
to the platform.
In this commit the USB part was implemented in QEMU using QEMU's USB APIs,
therefore the emulated CanoKey can communicate with the guest OS using USB.
Volker Rümelin [Sun, 5 Jun 2022 08:51:31 +0000 (10:51 +0200)]
ui/gtk-gl-area: create the requested GL context version
Since about 2018 virglrenderer (commit fa835b0f88 "vrend: don't
hardcode context version") tries to open the highest available GL
context version. This is done by creating the known GL context
versions from the highest to the lowest until (*create_gl_context)
returns a context != NULL.
This does not work properly with
the current QEMU gd_gl_area_create_context() function, because
gdk_gl_context_realize() on Wayland creates a version 3.0 legacy
context if the requested GL context version can't be created.
In order for virglrenderer to find the highest available GL
context version, return NULL if the created context version is
lower than the requested version.
This fixes the following error:
QEMU started with -device virtio-vga-gl -display gtk,gl=on.
Under Wayland, the guest window remains black and the following
information can be seen on the host.
gl_version 30 - compat profile
(qemu:5978): Gdk-WARNING **: 16:19:01.533:
gdk_gl_context_set_required_version
- GL context versions less than 3.2 are not supported.
(qemu:5978): Gdk-WARNING **: 16:19:01.537:
gdk_gl_context_set_required_version -
GL context versions less than 3.2 are not supported.
(qemu:5978): Gdk-WARNING **: 16:19:01.554:
gdk_gl_context_set_required_version -
GL context versions less than 3.2 are not supported.
vrend_renderer_fill_caps: Entering with stale GL error: 1282
To reproduce this error, an OpenGL driver is required on the host
that doesn't have the latest OpenGL extensions fully implemented.
An example for this is the Intel i965 driver on a Haswell processor.
Volker Rümelin [Sun, 5 Jun 2022 08:51:30 +0000 (10:51 +0200)]
ui/gtk-gl-area: implement GL context destruction
The counterpart function for gd_gl_area_create_context() is
currently empty. Implement the gd_gl_area_destroy_context()
function to avoid GL context leaks.
Merge tag 'pull-testing-next-140622-1' of https://github.com/stsquad/qemu into staging
Various testing fixes:
- fix compiler abi for test-armv6m-undef
- fix isns suffixes for i386 tcg tests
- fix gitlab cfi jobs
- fix makefile docker invocation
- don't enable xtensa-linux-user builds with system compiler
- fix CIRRUS_nn var checking
- don't spam the aarch64/32 runners with too many jobs at once
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmKnxfUACgkQ+9DbCVqe
# KkSksAf/eXGL/k0zUU4RmxmQGWatCPPfbdxWj/pRDJrZl4cvegYK4cqXcfblDkiJ
# f5kdB4FsSHgJUKic7K7sBSke2xgoi2bvBMeqNIknLo89b+xXZLJSzTE7XCi0W+hm
# ll3GtHNJMEPjrIhSIAsqiSMFloL5xi7uz+ylBAB49skGF6F3rkCMv4fl7TDFKqaH
# y5fRzLZMJg+FhlHNwGO0H8O32ZU7FlyqLGQT3JWZywR0n241kQ+gXLykQjQ7//nd
# 9EbtppXiSOuusbggGCbmUQrEprW93TAEkgxUcuUuQYiAwDp89s66Q0gcwo1qMtcx
# mORfc+018/WJpBwFF904hBPPjgO08w==
# =PfzM
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 13 Jun 2022 04:19:17 PM PDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-next-140622-1' of https://github.com/stsquad/qemu:
.gitlab: use less aggressive nproc on our aarch64/32 runners
gitlab: compare CIRRUS_nn vars against 'null' not ""
tests/tcg: disable xtensa-linux-user again
tests/docker: fix the IMAGE for build invocation
gitlab-ci: Fix the build-cfi-aarch64 and build-cfi-ppc64-s390x jobs
tests/tcg/i386: Use explicit suffix on fist insns
test/tcg/arm: Use -mfloat-abi=soft for test-armv6m-undef
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Mon, 13 Jun 2022 17:12:58 +0000 (18:12 +0100)]
.gitlab: use less aggressive nproc on our aarch64/32 runners
Running on all 80 cores of our aarch64 runner does occasionally
trigger a race condition which fails the build. However the CI system
is not the time and place to play with much heisenbugs so turn down
the nproc to "only" use 40 cores in the build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220613171258.1905715-8-alex.bennee@linaro.org>
gitlab: compare CIRRUS_nn vars against 'null' not ""
The GitLab variable comparisons don't have shell like semantics where
an unset variable compares equal to empty string. We need to explicitly
test against 'null' to detect an unset variable.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Tested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220608160651.248781-1-berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220613171258.1905715-7-alex.bennee@linaro.org>
Paolo Bonzini [Mon, 13 Jun 2022 17:12:56 +0000 (18:12 +0100)]
tests/tcg: disable xtensa-linux-user again
The move from tests/tcg/configure.sh started enabling the container image
for xtensa-linux-user, which fails because the compiler does not have
the full set of headers. The cause is the "xtensa*-softmmu)" case
in tests/tcg/configure.sh which became just "xtensa*)" in the new
probe_target_compiler shell function. Look out for xtensa*-linux-user
and do not configure it.
Reported-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220608135727.1341946-1-pbonzini@redhat.com> Fixes: cd362defbb ("tests/tcg: merge configure.sh back into main configure script") Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220613171258.1905715-6-alex.bennee@linaro.org>
Alex Bennée [Mon, 13 Jun 2022 17:12:55 +0000 (18:12 +0100)]
tests/docker: fix the IMAGE for build invocation
We inadvertently broke the ability to run local builds when the code
was re-factored. The result was the run stanza failing to find the
docker image with it's qemu/ prefix.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Fixes: d39eaa2266 ("tests/docker: simplify docker-TEST@IMAGE targets") Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220613171258.1905715-5-alex.bennee@linaro.org>
Thomas Huth [Mon, 13 Jun 2022 17:12:54 +0000 (18:12 +0100)]
gitlab-ci: Fix the build-cfi-aarch64 and build-cfi-ppc64-s390x jobs
The job definitions recently got a second "variables:" section by
accident and thus are failing now if one tries to run them. Merge
the two sections into one again to fix the issue.
And while we're at it, bump the timeout here (70 minutes are currently
not enough for the aarch64 job). The jobs are marked as manual anyway,
so if the user starts them, they want to see their result for sure and
then it's annoying if the job timeouts too early.
Fixes: e312d1fdbb ("gitlab: convert build/container jobs to .base_job_template") Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220603124809.70794-1-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220613171258.1905715-4-alex.bennee@linaro.org>
test/tcg/arm: Use -mfloat-abi=soft for test-armv6m-undef
GCC11 from crossbuild-essential-armhf from ubuntu 22.04 errors:
cc1: error: ‘-mfloat-abi=hard’: selected architecture lacks an FPU
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220604032713.174976-1-richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220613171258.1905715-2-alex.bennee@linaro.org>
Warner Losh [Sun, 12 Jun 2022 14:18:48 +0000 (08:18 -0600)]
bsd-user: Implement link, linkat, unlink and unlinkat
Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 12 Jun 2022 14:16:46 +0000 (08:16 -0600)]
bsd-user: Implement rename and renameat
Plus the helper LOCK_PATH2 and UNLOCK_PATH2 macros.
Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 12 Jun 2022 14:07:39 +0000 (08:07 -0600)]
bsd-user: Implement fdatasync, fsync and close_from
Implement fdatasync(2), fsync(2) and close_from(2).
Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 12 Jun 2022 03:32:19 +0000 (21:32 -0600)]
bsd-user: Implement open, openat and close
Add the open, openat and close system calls. We need to lock paths, so
implmenent that as well.
Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@FreeBSD.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Merge tag 'mips-20220611' of https://github.com/philmd/qemu into staging
MIPS patches queue
- Various TCG fixes (Marcin Nowakowski, Ni Hui, Stefan Pejic, Stefan Pejic)
- Sysbus floppy controller fix (Peter Maydell)
- QOM'ification of PIIX southbridge (Mark Cave-Ayland, Bernhard Beschow)
- Various fixes on ISA devices commonly used by x86/mips machines (Bernhard)
- Few cleanups in accel/tcg & documentation (Bernhard)
* tag 'mips-20220611' of https://github.com/philmd/qemu:
docs/devel: Fix link to developer mailing lists
accel/tcg: Inline dump_opcount_info() and remove it
accel/tcg/cpu-exec: Unexport dump_drift_info()
hw/mips/boston: Initialize g_autofree pointers
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tag 'bsd-user-preen-2022q2-pull-request' of ssh://github.com/qemu-bsd-user/qemu-bsd-user into staging
bsd-user upstreaming: read, write and exit
This series of patches continues the effort to get system calls working
upstream. This series was cleaved off a prior series to give me time to rework
based on the feedback from the first time I posted these. read, write and exit
are implemented, along with a few helper functions and tracing.
# -----BEGIN PGP SIGNATURE-----
# Comment: GPGTools - https://gpgtools.org
#
# iQIzBAABCgAdFiEEIDX4lLAKo898zeG3bBzRKH2wEQAFAmKknqsACgkQbBzRKH2w
# EQDJFhAA3ARnphfxKUvKHzi6ARza8YRFNJs/X48l78xugW8Fx2+UFxn/oPzVYuM3
# TUIIRNIXQxYDWP5rNN4zNfYjn1F32qx4PrLzzHw4t/0pNvNDvbVKyw+OB1pNUVI9
# 6hNH7jTLczi4OwZFPC4bJdFFHI55t4PCHxPaMQQO76lEsFzz3+9OcNNj3/j5aTBH
# kY3FsmOIKFEFuqDANjdn13lBlkNNWj5WMIsEQd+k1TPTfG3EWDlfHVJVezx9j5uH
# KMUjRRqBANLVJuqhog7sVAdkR6o/aKuq16nPVAgkLeJrsjwljoO1bGL3DTFWzhAo
# v3+S3a5gCReLXA/Z+dGCuJysmimsm+XdJWHyNIwDCV/UUg9tXc9/BI/eBSK7MLbz
# hvURY3cRSSVY+xiu5ts1OCp1bbqMaYbpIrv1mLZMA/32Y1KNv0LwSI0ClGag0MJ1
# rSVC3i/TGYn8Dk7TlfKkrKn751ZCCDsxZGROEcPlTV84Mc7080lpgYZKlgLCPJNT
# WWaVSBs9YhHhmoG3R3GurfsHnnRr8Y8iZkmndoCJdeSlmZh/1oD31PWKhnydsPa9
# jQCENkAM0dOM/r+hV+paFxOPkgklu7KLtjqGnVRxgB4j37jA9KDyw+UXLmjipP0K
# IwPlsNIfk1LujID3o5nJVgf/K+TJpXS7JDcUsuB9+FvlkeEMWm8=
# =nOc2
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 11 Jun 2022 06:54:51 AM PDT
# gpg: using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* tag 'bsd-user-preen-2022q2-pull-request' of ssh://github.com/qemu-bsd-user/qemu-bsd-user:
bsd-user/freebsd/os-syscall.c: Implement exit
bsd-user/bsd-file.h: Meat of the write system calls
bsd-user/bsd-file.h: Add implementations for read, pread, readv and preadv
bsd-user/freebsd/os-syscall.c: Tracing and error boilerplate
bsd-user/freebsd/os-syscall.c: unlock_iovec
bsd-user/freebsd/os-syscall.c: lock_iovec
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
projects / mirror_qemu.git / log