drm/tilcdc: Flush flip-work workqueue before drm_flip_work_cleanup()
Flush flip-work workqueue before drm_flip_work_cleanup(). It causes a
nasty warning if there is unfinished flip-work in the queue when
drm_flip_work_cleanup() is called. The flush_workqueue() has to be
called before drm_crtc_cleanup() for unref_worker() to be able to do
its job.
Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
drm/tilcdc: Clean up LCDC functional clock rate setting code
Clean up LCDC functional clock rate setting code.
The LCDC functional clock is set by two functions: mode_set_nofb() and
cpufreq_transition().
When tilcdc_crtc_mode_set_nofb() is called in atomic commit phase the
drm atomic helpers have taken all the necessary drm locks and turned
off the crtc, while tilcdc_commit() is keeping LCDC powered on. For
mode_set_nofb() just a simple clock setting function without any
locking or power management code is enough. The new tilcdc_crtc_set_clk()
is implemented for that purpose.
cpufreq_transition() on the other hand is called from outside DRM and
it needs to take the necessary locks and turn off the CRTC while
keeping the LCDC powered. The reimplemented tilcdc_crtc_update_clk()
is for that purpose and it uses the new tilcdc_crtc_set_clk() to
actually set the clock.
Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
drm/tilcdc: Take crtc modeset lock while updating the crtc clock rate
Take crtc modeset lock while updating the crtc clock rate. To avoid a
race in tilcdc_crtc_update_clk(), we do not want crtc mode to change
while we update crtc clock.
Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Jyri Sarha [Sat, 13 Aug 2016 18:08:20 +0000 (21:08 +0300)]
drm/tilcdc: Choose console BPP that supports RGB
Choose console BPP that supports RGB and remove the old fbdev bpp
selection code. LCDC on AM335x has red and blue wires switched between
24 bit and 16 bit colors. If 24 format is wired for RGB colors, the 16
bit format is wired for BGR. drm_fbdev_cma_init() does not currently
like anything else but RGB formats, so we must choose such bytes per
pixel value that supports RGB.
Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add "blue-and-red-wiring"-device tree property and update devicetree
binding document.
The red and blue components are reversed between 24 and 16 bit modes
on am335x LCDC output pins. To get 24 RGB format the red and blue
wires has to be crossed and this in turn causes 16 colors output to be
in BGR format. With straight wiring the 16 color is RGB and 24 bit is
BGR.
The new property describes whether the red and blue wires are crossed
or not. If the property is not present or its value is not recognized
the legacy mode is assumed. The legacy configuration supports RGB565,
RGB888 and XRGB8888 formats. However, depending on wiring, the red and
blue colors are swapped in either 16 or 24-bit color modes.
For more details see section 3.1.1 in AM335x Silicon Errata:
http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360
Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Jyri Sarha [Fri, 26 Aug 2016 12:10:14 +0000 (15:10 +0300)]
drm/tilcdc: Write DMA base and ceiling address with single instruction
Write DMA base and ceiling address with a single instruction, if
available. This should make it more unlikely that LCDC would fetch the
DMA addresses in the middle of an update. Having bad combination of
addresses in dma base and ceiling (e.g base > ceiling) can cause
unpredictaple behavior in LCDC.
Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Karl Beldan [Tue, 23 Aug 2016 12:56:59 +0000 (12:56 +0000)]
drm/tilcdc: Adjust the FB_CEILING address
The LCDC seems to expect its framebuffer ceiling address pointer to be
an inclusive bound. The IP rev2 seems to cope with that but rev1 (as
found on the LCDK) don't.
Also note that this is what the framebuffer code does in da8xx-fb.c.
Since, as the TRM puts it, "The 2 LSBs are hardwired to 00b", the
dma_addr_t can be decremented without cast.
I tested it with a v2 (AM335x, rev 0x4F201000) and an LCDK (v1).
Signed-off-by: Karl Beldan <kbeldan@baylibre.com> Signed-off-by: Jyri Sarha <jsarha@ti.com>
Dave Airlie [Wed, 31 Aug 2016 20:15:38 +0000 (06:15 +1000)]
Merge tag 'topic/drm-misc-2016-08-31' of git://anongit.freedesktop.org/drm-intel into drm-next
More -misc stuff
- moar drm_crtc.c split up&documentation
- some fixes for the simple kms helpers (Andrea)
- I included all the dri1 patches from David - we're not removing any code
or drivers, and it seems to have worked as a wake-up call to motivate a
few more people to upstream kms conversions for these. Feel free to
revert if you disagree strongly.
- a few other single patches
* tag 'topic/drm-misc-2016-08-31' of git://anongit.freedesktop.org/drm-intel: (24 commits)
drm: drm_probe_helper: Fix output_poll_work scheduling
drm: bridge/dw-hdmi: Fix colorspace and scan information registers values
drm/doc: Polish docs for drm_property&drm_property_blob
drm: Unify handling of blob and object properties
drm: Extract drm_property.[hc]
drm: move drm_mode_legacy_fb_format to drm_fourcc.c
drm/doc: Polish docs for drm_mode_object
drm: Remove drm_mode_object->atomic_count
drm: Extract drm_mode_object.[hc]
drm/doc: Polish kerneldoc for encoders
drm: Extract drm_encoder.[hc]
drm/fb-helper: don't call remove_conflicting_framebuffers for FB=m && DRM=y
drm/atomic-helper: Add NO_DISABLE_AFTER_MODESET flag support for plane commit
drm/atomic-helper: Disable appropriate planes in disable_planes_on_crtc()
drm/atomic-helper: Add atomic_disable CRTC helper callback
drm: simple_kms_helper: add support for bridges
drm: simple_kms_helper: make connector optional at init time
drm/bridge: introduce bridge detaching mechanism
drm/simple-helpers: Always add planes to the state update
drm: reduce GETCLIENT to a minimum
...
drm_kms_helper_poll_enable_locked() should check if we have delayed event
pending and if we have, schedule the work to run without delay.
Currently the output_poll_work is only scheduled if any of the connectors
have DRM_CONNECTOR_POLL_CONNECT or DRM_CONNECTOR_POLL_DISCONNECT with
DRM_OUTPUT_POLL_PERIOD delay. It does not matter if we have delayed event
already registered to be handled. The detection will be delayd by
DRM_OUTPUT_POLL_PERIOD in any case.
Furthermore if none of the connectors are marked as POLL_CONNECT or
POLL_DISCONNECT because all connectors are either POLL_HPD or they are
always connected: the output_poll_work will not run at all even if we
have delayed event marked.
When none of the connectors require polling, their initial status change
from unknown to connected/disconnected is not going to be handled until
the first kms application starts or if we have fb console enabled.
Note that in general the output poll work should be enabled already
when this happens, but at driver load usually the first probe happens
before the output polling is enabled. This patch fixes this case.
Jose Abreu [Mon, 29 Aug 2016 09:30:51 +0000 (10:30 +0100)]
drm: bridge/dw-hdmi: Fix colorspace and scan information registers values
Colorspace and scan information values were being written in wrong
offsets. This patch corrects this and writes the values at the
offsets specified in the databook.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/96fd0f06b7ebc2ee5cb8239a99648f3107e24497.1471530573.git.joabreu@synopsys.com
Daniel Vetter [Mon, 29 Aug 2016 08:27:57 +0000 (10:27 +0200)]
drm/doc: Polish docs for drm_property&drm_property_blob
- remove kerneldoc for drm-internal functions
- drm_property_replace_global_blob isn't actually atomic, and doesn't
need to be. Update docs&comments to match
- document all the types and try to link things a bit better
- nits all over
Daniel Vetter [Mon, 29 Aug 2016 08:27:56 +0000 (10:27 +0200)]
drm: Unify handling of blob and object properties
They work exactly the same now, after the refcounting unification a bit
ago. The only reason they're distinct is backwards compat with existing
userspace.
Daniel Vetter [Mon, 29 Aug 2016 08:27:55 +0000 (10:27 +0200)]
drm: Extract drm_property.[hc]
This just contains the base property classes and all the code to
handle blobs. I think for any kind of standardized/shared properties
it's better to have separate files - this is fairly big already as-is.
Daniel Vetter [Mon, 29 Aug 2016 08:27:51 +0000 (10:27 +0200)]
drm: Extract drm_mode_object.[hc]
Just for the struct drm_mode_object base class. The header file was
already partially extracted to help untangle the include loops.
v2:
- Also move the generic get/set property ioctls. At first this seemed
like a bad idea since it requires making drm_mode_crtc_set_obj_prop
non-static. But eventually that will get split away too (like
the connector version already is) for both crtc and planes. Hence I
reconsidered.
- drm_mode_object.[hc] instead of drm_modeset.[hc], which requires
renaming the drm_modeset.h header I already started building up.
This is more consistent (matches the name of the main structure),
and I want to be able to use drm_modeset.[hc] for the basic modeset
init/cleanup functionality like drm_mode_config_init.
Daniel Vetter [Mon, 29 Aug 2016 08:27:50 +0000 (10:27 +0200)]
drm/doc: Polish kerneldoc for encoders
- Move missing bits into struct drm_encoder docs.
- Explain that encoders are 95% internal and only 5% uapi, and that in
general the uapi part is broken.
- Remove verbose comments for functions not exposed to drivers.
v2: Review from Archit:
- Appease checkpatch in the moved code.
- Make it clearer that bridges are not exposed to userspace.
Daniel Vetter [Mon, 29 Aug 2016 08:27:49 +0000 (10:27 +0200)]
drm: Extract drm_encoder.[hc]
Same treatment as before. Only hiccup is drm_crtc_mask, which
unfortunately can't be resolved until drm_crtc.h is less of a monster.
Untangle the header loop with a forward declaration for that static
inline.
Arnd Bergmann [Mon, 29 Aug 2016 12:34:07 +0000 (14:34 +0200)]
drm/fb-helper: don't call remove_conflicting_framebuffers for FB=m && DRM=y
When CONFIG_DRM_KMS_FB_HELPER is disabled, we can have a configuration
in which some DRM drivers are built-in, but the framebuffer core is a
loadable module. This results in a link error, such as:
drivers/gpu/drm/radeon/radeon.o: In function `radeon_pci_probe':
radeon_kfd.c:(.text.radeon_pci_probe+0xbc): undefined reference to `remove_conflicting_framebuffers'
drivers/gpu/drm/amd/amdgpu/amdgpu.o: In function `amdgpu_pci_probe':
amdgpu_mn.c:(.text.amdgpu_pci_probe+0xa8): undefined reference to `remove_conflicting_framebuffers'
drivers/gpu/drm/mgag200/mgag200.o: In function `mga_vram_init':
mgag200_ttm.c:(.text.mga_vram_init+0xa8): undefined reference to `remove_conflicting_framebuffers'
drivers/gpu/drm/mgag200/mgag200.o: In function `mga_pci_probe':
mgag200_ttm.c:(.text.mga_pci_probe+0x88): undefined reference to `remove_conflicting_framebuffers'
Makefile:969: recipe for target 'vmlinux' failed
This changes the compile-time check to IS_REACHABLE, which means we end up
not calling remove_conflicting_framebuffers() in the configuration, which
seems good enough, as we know that no framebuffer driver is loaded by the
time that the built-in DRM driver calls remove_conflicting_framebuffers.
We could alternatively avoid the link error by forcing CONFIG_FB to not
be a module in this case, but that wouldn't change anything at runtime,
and just make the already convoluted set of dependencies worse here.
I could not find out what happens if the fbdev driver gets loaded as
a module after the DRM driver is already initialized, but that is a case
that can happen with or without this patch.
Liu Ying [Mon, 29 Aug 2016 09:12:03 +0000 (17:12 +0800)]
drm/atomic-helper: Add NO_DISABLE_AFTER_MODESET flag support for plane commit
Drivers may set the NO_DISABLE_AFTER_MODESET flag in the 'flags' parameter
of the helper drm_atomic_helper_commit_planes() if the relevant display
controllers(e.g., IPUv3 for imx-drm) require to disable a CRTC's planes
when the CRTC is disabled. The helper would skip the ->atomic_disable
call for a plane if the CRTC of the old plane state needs a modesetting
operation. Of course, the drivers need to disable the planes in their CRTC
disable callbacks since no one else would do that.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <linux@armlinux.org.uk> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1472461923-14364-1-git-send-email-gnuiyl@gmail.com
Liu Ying [Fri, 26 Aug 2016 07:30:39 +0000 (15:30 +0800)]
drm/atomic-helper: Disable appropriate planes in disable_planes_on_crtc()
Currently, the helper drm_atomic_helper_disable_planes_on_crtc() calls
->atomic_disable for all planes _to be_ enabled on a particular CRTC.
This is obviously wrong for those planes which are not scanning out frames
when the helper is called. Instead, it's sane to disable active planes
of old_crtc_state in the helper.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <linux@armlinux.org.uk> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1472196644-30563-3-git-send-email-gnuiyl@gmail.com
Some display controllers need plane(s) to be disabled together with
the relevant CRTC, e.g., the IPUv3 display controller for imx-drm.
This patch adds atomic_disable CRTC helper callback so that
old_crtc_state(as a parameter of the callback) could be used
to get the active plane(s) of the old CRTC state for disable operation.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <linux@armlinux.org.uk> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1472196644-30563-2-git-send-email-gnuiyl@gmail.com
Andrea Merello [Thu, 25 Aug 2016 09:04:34 +0000 (11:04 +0200)]
drm: simple_kms_helper: add support for bridges
Introduce drm_simple_display_pipe_attach_bridge() and
drm_simple_display_pipe_detach_bridge() in order to make it possible to use
drm encoders with the simple display pipes managed by simple_kms_helpers
Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1472115874-6219-3-git-send-email-andrea.merello@gmail.com
Daniel Vetter [Tue, 23 Aug 2016 06:25:40 +0000 (08:25 +0200)]
drm/simple-helpers: Always add planes to the state update
Our update function is hooked to the single plane, which might not get
called for crtc-only updates. Which is surprising, so fix this by
always adding the plane.
While at it document how&when the event should be sent out better in
the kerneldoc.
David Herrmann [Thu, 25 Aug 2016 14:35:05 +0000 (16:35 +0200)]
drm: reduce GETCLIENT to a minimum
The *only* known user of GETCLIENT is libva, which uses it to check
whether its own context is authenticated. It used to iterate all clients,
look for one that matches its own pid and then check its state.
The entire purpose for us to still have a GETCLIENT implementation is to
serve libva. So lets not pretend we do anything else: Make this function
return information on the caller's context only, fake the PID to the
caller's pid so they always match, and just fill in the "authenticated"
bit, nothing else.
This patch reduces the complexity of GETCLIENT to a bare minimum, avoids
any dependency on priv->uid or priv->pid (allows us to get rid of them),
and makes libva happy by always *exactly* returning the information it
wants.
David Herrmann [Thu, 4 Aug 2016 08:06:57 +0000 (10:06 +0200)]
drm: make DRI1 drivers depend on BROKEN
The legacy DRI1 drivers expose highly broken interfaces to user-space. No
modern system should enable them, or you will effectively allow user-space
to circumvent most of your kernel security measures. The DRI1 kernel APIs
are simply broken.
User-space can always use vesafb/efifb/simplefb and friends to get working
graphics.
Lets hide the old drivers behind CONFIG_BROKEN. In case they turn out to
be still used (really?), we can easily revert this and figure out a way to
move them out of sight (e.g., moving all DRI1 drivers to
drivers/gpu/dri1/).
David Herrmann [Thu, 4 Aug 2016 08:06:56 +0000 (10:06 +0200)]
drm: hide legacy drivers with CONFIG_DRM_LEGACY
Lets move forward and hide the remaining DRI1 drivers behind a config
option, so we have a central place to disable them all. Furthermore, we
can provide a clear warning to anyone enabling them.
Dave Airlie [Thu, 25 Aug 2016 02:59:50 +0000 (12:59 +1000)]
Merge branch 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux into drm-next
First drm-next pull for radeon and amdgpu for 4.9. Highlights:
- powerplay support for iceland asics
- improved GPU reset (both full asic and per block)
- UVD and VCE powergating for CZ and ST
- VCE clockgating for CZ and ST
- Support for pre-initialized (e.g., zeroed) vram buffers
- ttm cleanups
- virtual display support
- core and radeon/amdgpu support for page_flip_target
- lots of bug fixes and clean ups
* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (171 commits)
drm/amdgpu: use memcpy_toio for VCE firmware upload
drm/amdgpu: use memcpy_to/fromio for UVD fw upload
drm/amd/powerplay: delete useless code in iceland_hwmgr.c.
drm/radeon: switch UVD code to use UVD_NO_OP for padding
drm/amdgpu: switch UVD code to use UVD_NO_OP for padding
drm/radeon: add support for UVD_NO_OP register
drm/amdgpu: add support for UVD_NO_OP register
drm/amdgpu: fix VCE ib alignment value
drm/amdgpu: fix IB alignment for UVD
drm/amd/amdgpu: Print ring name in amdgpu_ib_schedule()
drm/radeon: remove dead code, si_mc_load_microcode (v2)
drm/radeon/cik: remove dead code (v2)
drm/amd/powerplay: avoid NULL dereference, cz_hwmgr.c
drm/amd/powerplay: avoid NULL pointer dereference
drm/amdgpu/gmc8: remove dead code (v2)
drm/amdgpu/gmc7: remove dead code (v2)
drm/amdgpu: Fix indentation in dce_v8_0_audio_write_sad_regs()
drm/amdgpu: Use correct mask in dce_v8_0_afmt_setmode() and fix comment typos.
drm/amdgpu: cleanup amdgpu_vm_bo_update params
drm/amdgpu: stop adding dummy entry in amdgpu_ttm_placement_init
...
Dave Airlie [Thu, 25 Aug 2016 02:36:36 +0000 (12:36 +1000)]
Merge branch 'drm-intel-next' of git://anongit.freedesktop.org/drm-intel into drm-next
drm-intel-next-2016-08-22:
- bugfixes and cleanups for rcu-protected requests (Chris)
- atomic modeset fixes for gpu reset on pre-g4x (Maarten&Ville)
- guc submission improvements (Dave Gordon)
- panel power sequence cleanup (Imre)
- better use of stolen and unmappable ggtt (Chris), plus prep work to make that
happen
- rework of framebuffer offsets, prep for multi-plane framebuffers (Ville)
- fully partial ggtt vmaps, including fenced ones (Chris)
- move lots more of the gem tracking from the object to the vma (Chris)
- tune the command parser (Chris)
- allow fbc without fences on recent platforms (Chris)
- fbc frontbuffer tracking fixes (Chris)
- fast prefaulting using io-mappping.h pgprot caching (Chris)
* 'drm-intel-next' of git://anongit.freedesktop.org/drm-intel: (141 commits)
io-mapping: Fixup for different names of writecombine
io-mapping.h: s/PAGE_KERNEL_IO/PAGE_KERNEL/
drm/i915: Update DRIVER_DATE to 20160822
drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass
drm/i915: Embed the io-mapping struct inside drm_i915_private
io-mapping: Always create a struct to hold metadata about the io-mapping
drm/i915/fbc: Allow on unfenced surfaces, for recent gen
drm/i915/fbc: Don't set an illegal fence if unfenced
drm/i915: Flush delayed fence releases after reset
drm/i915: Reattach comment, complete type specification
drm/i915/cmdparser: Accelerate copies from WC memory
drm/i915/cmdparser: Use binary search for faster register lookup
drm/i915/cmdparser: Check for SKIP descriptors first
drm/i915/cmdparser: Compare against the previous command descriptor
drm/i915/cmdparser: Improve hash function
drm/i915/cmdparser: Only cache the dst vmap
drm/i915/cmdparser: Use cached vmappings
drm/i915/cmdparser: Add the TIMESTAMP register for the other engines
drm/i915/cmdparser: Make initialisation failure non-fatal
drm/i915: Stop discarding GTT cache-domain on unbind vma
...
Dave Airlie [Thu, 25 Aug 2016 02:35:35 +0000 (12:35 +1000)]
Merge branch 'for-next' of git://people.freedesktop.org/~seanpaul/dogwood into drm-next
This pull request contains the following rockchip drm changes:
- Introduce support for rk3399 vop/crtc
- Add PSR framework to the rockchip driver
- Implement PSR in the rockchip analogix edp driver
- Fix panel on/off in analogix to avoid damaging panels
- Some miscellaneous fixes to clean up logs and code readability
* 'for-next' of git://people.freedesktop.org/~seanpaul/dogwood:
drm/rockchip: analogix_dp: drop unnecessary probe deferral "error" print
drm/rockchip: Enable vblank without event
drm/rockchip: Improve analogix-dp psr handling
drm/rockchip: A couple small fixes to psr
drm/rockchip: Use a spinlock to protect psr state
drm/rockchip: Don't use a delayed worker for psr state changes
drm/rockchip: Convert psr_list_mutex to spinlock and use it
drm/rockchip: analogix_dp: implement PSR function
drm/bridge: analogix_dp: add the PSR function support
drm/rockchip: add an common abstracted PSR driver
drm/rockchip: vop: export line flag function
drm/bridge: analogix_dp: Ensure the panel is properly prepared/unprepared
dt-bindings: add compatible strings for big/little rockchip vops
dt-bindings: sort Rockchip vop compatible by chip's number
drm/rockchip: vop: add rk3399 vop support
drm/rockchip: vop: introduce VOP_REG_MASK
drm/rockchip: sort registers define by chip's number
Christian König [Tue, 23 Aug 2016 09:18:59 +0000 (11:18 +0200)]
drm/amdgpu: use memcpy_toio for VCE firmware upload
Try to be clean here, even when it's a noop on x86.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 23 Aug 2016 09:00:17 +0000 (11:00 +0200)]
drm/amdgpu: use memcpy_to/fromio for UVD fw upload
Also use the firmware size from the header instead of calculating it.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Vetter [Wed, 24 Aug 2016 10:19:15 +0000 (12:19 +0200)]
drm/doc: Fix vga_switcheroo xref
Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: b754b35b089d ("vgaarbiter: rst-ifiy and polish kerneldoc") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160824101916.30125-1-daniel.vetter@ffwll.ch
Chris Wilson [Tue, 23 Aug 2016 15:50:24 +0000 (16:50 +0100)]
io-mapping.h: s/PAGE_KERNEL_IO/PAGE_KERNEL/
PAGE_KERNEL_IO is an x86-ism. Though it is used to define the pgprot_t
used for the iomapped region, it itself is just PAGE_KERNEL. On all
other arches, PAGE_KERNEL_IO is undefined so in a general header we must
refrain from using it.
v2: include pgtable for pgprot_combine()
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: cafaf14a5d8f ("io-mapping: Always create a struct to hold metadata about the io-mapping") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: linux-mm@kvack.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160823155024.22379-1-chris@chris-wilson.co.uk
(cherry picked from commit ac96b5566926af83463ddcf4655856033c092f26)
Commit d112a8163f83 ("gma500/cdv: Add eDP support") replaced the
code inside this if-conditional with gma_backlight_set(), which
becomes a nop stub if CONFIG_BACKLIGHT_CLASS_DEVICE is disabled.
So, there is no need to guard the caller with config_enabled().
Note:
This is one of remaining TODOs to deprecate config_enabled() macro.
Refer to commit 97f2645f358b ("tree-wide: replace config_enabled()
with IS_ENABLED()").
Daniel Vetter [Tue, 23 Aug 2016 12:54:48 +0000 (14:54 +0200)]
drm/doc: Document uapi requirements in DRM
Everyone knows them, except all the new folks joining from the ARM
side haven't lived through all the pain of the past years and are
entirely surprised when I raise this. Definitely time to document
this.
Last time this was a big discussion was about 6 years ago, when qcom
tried to land a kernel driver without userspace. Dave Airlie made the
rules really clear:
http://airlied.livejournal.com/73115.html
This write-up here is essentially what I've put into a presentation a
while ago, which was also reviewed by Dave:
Cc: Dave Airlie <airlied@gmail.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Rob Clark <robdclark@gmail.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Cc: Inki Dae <inki.dae@samsung.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Dave Airlie <airlied@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 23 Aug 2016 21:11:48 +0000 (07:11 +1000)]
Merge tag 'topic/drm-misc-2016-08-23' of git://anongit.freedesktop.org/drm-intel into drm-next
A few bigger things:
- start of splitting drm_crtc.c into more manageable and better documneted
chunks
- DRM_DEV_* logging (Sean)
* tag 'topic/drm-misc-2016-08-23' of git://anongit.freedesktop.org/drm-intel: (46 commits)
drm/fb-helper: Make docs for fb_set_suspend wrappers consistent
drm/rockchip: Delete unnecessary assignment for the field "owner"
drm/bridge: dw-hdmi: Delete unnecessary assignment for the field "owner"
drm/rockchip: Don't continue trying to enable crtc on failure
drm/fb-helper: Add drm_fb_helper_set_suspend_unlocked()
drm/fb-helper: Fix the dummy remove_conflicting_framebuffers
drm/udl: Ensure channel is selected before using the device.
drm: Avoid calling dev_printk(.dev = NULL)
drm: avoid exposing kernel stack in compat_drm_getstats
reservation: fix small comment typo
drm: Don't implement empty prepare_fb()/cleanup_fb()
virtio-gpu: Use memdup_user() rather than duplicating its implementation
GPU-DRM-Savage: Use memdup_user() rather than duplicating
drm: Allow drivers to modify plane_state in prepare_fb/cleanup_fb
drm/rockchip: Use DRM_DEV_ERROR in vop
drm: Introduce DRM_DEV_* log messages
drm/edid: CEA mode 64 1080p100 vsync pulse width incorrect
Revert "drm/hisilicon: Don't set drm_device->platformdev"
dma-buf: fix kernel-doc warning and typos
drm: Fix kerneldoc in drm_plane_helper.c
...
Tom St Denis [Mon, 22 Aug 2016 14:54:28 +0000 (10:54 -0400)]
drm/amd/amdgpu: Print ring name in amdgpu_ib_schedule()
If the ring isn't ready lets print out which ring name
to help debugging.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/radeon: remove dead code, si_mc_load_microcode (v2)
In an if block for (running == 0) running cannot be non-zero.
v2: agd: remove unused variable
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In an if block for (running == 0) running cannot be non-zero.
v2: agd: remove unused variable
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if (a == NULL || a->b == NULL)
leads to a NULL pointer dereference if a == NULL.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if (a == NULL || a->b == NULL)
leads to a NULL pointer dereference if a == NULL.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In an if block for (running == 0) running cannot be non-zero.
v2: agd: remove unused variable
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In an if block for (running == 0) running cannot be non-zero.
v2: agd: remove unused variable
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alexandre Demers [Mon, 22 Aug 2016 00:38:26 +0000 (20:38 -0400)]
drm/amdgpu: Fix indentation in dce_v8_0_audio_write_sad_regs()
Fixed indentation for readability.
Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Brian Norris [Wed, 17 Aug 2016 21:10:09 +0000 (14:10 -0700)]
drm/rockchip: analogix_dp: drop unnecessary probe deferral "error" print
This driver is the only user of of_drm_find_panel() which prints an
error before doing probe deferral, yielding messages like this on boot,
before eventually succeeding:
[ 2.234271] [drm:rockchip_dp_probe] *ERROR* failed to find panel
...
[ 4.797539] [drm:rockchip_dp_probe] *ERROR* failed to find panel
...
Let's just drop the message.
Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
Sean Paul [Wed, 17 Aug 2016 00:12:45 +0000 (17:12 -0700)]
drm/rockchip: Improve analogix-dp psr handling
Remove the delayed worker, opting instead for the non-delayed
variety. Also introduce a lock to ensure we don't have races
with the worker and psr_state. Finally, cancel and wait for
the worker to finish when disabling the bridge.
Reviewed-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
Yakir Yang [Sun, 24 Jul 2016 06:57:48 +0000 (14:57 +0800)]
drm/bridge: analogix_dp: add the PSR function support
The full name of PSR is Panel Self Refresh, panel device could refresh
itself with the hardware framebuffer in panel, this would make lots of
sense to save the power consumption.
This patch have exported two symbols for platform driver to implement
the PSR function in hardware side:
- analogix_dp_active_psr()
- analogix_dp_inactive_psr()
Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
Yakir Yang [Sun, 24 Jul 2016 06:57:44 +0000 (14:57 +0800)]
drm/rockchip: add an common abstracted PSR driver
The PSR driver have exported four symbols for specific device driver, and
it's safe to call them in interrupt context:
- rockchip_drm_psr_register()
- rockchip_drm_psr_unregister()
- rockchip_drm_psr_enable()
- rockchip_drm_psr_disable()
- rockchip_drm_psr_flush()
Encoder driver should call the register/unregister interfaces to hook
itself into common PSR driver, encoder have implement the 'psr_set'
callback which use the set PSR state in hardware side.
Crtc driver would call the enable/disable interfaces when vblank is
enable/disable, after that the common PSR driver would call the encoder
registered callback to set the PSR state.
Fb driver would call the flush interface in 'fb->dirty' callback, this
helper function would force all PSR enabled encoders to exit from PSR
for 3 seconds.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
[seanpaul removed leftover psr_enabled/psr_work kruft from drm_vop.c] Signed-off-by: Sean Paul <seanpaul@chromium.org>
Yakir Yang [Sun, 24 Jul 2016 06:57:40 +0000 (14:57 +0800)]
drm/rockchip: vop: export line flag function
VOP have integrated a hardware counter which indicate the exact display
line that vop is scanning. And if we're interested in a specific line,
we can set the line number to vop line_flag register, and then vop would
generate a line_flag interrupt for it.
For example eDP PSR function is interested in the vertical blanking
period, then driver could set the line number to zero.
This patch have exported a symbol that allow other driver to listen the
line flag event with given timeout limit:
- rockchip_drm_wait_line_flag()
Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
Sean Paul [Mon, 8 Aug 2016 18:53:18 +0000 (14:53 -0400)]
drm/bridge: analogix_dp: Ensure the panel is properly prepared/unprepared
Instead of just preparing the panel on bind, actually prepare/unprepare
during modeset/disable. The panel must be prepared in order to read hpd
status and edid, so we need to keep state around the prepares in order
to ensure we don't accidentally turn the panel off at the wrong time.
Reviewed-by: Yakir Yang <ykk@rock-chips.com> Tested-by: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
Mark Yao [Wed, 20 Apr 2016 06:20:49 +0000 (14:20 +0800)]
dt-bindings: add compatible strings for big/little rockchip vops
This patch documents the compatible strings for the big and little vop
in rockchip's drm driver.
Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
[seanpaul removed superfluous description per tfiga's review] Signed-off-by: Sean Paul <seanpaul@chromium.org>
Mark Yao [Wed, 20 Apr 2016 06:18:14 +0000 (14:18 +0800)]
dt-bindings: sort Rockchip vop compatible by chip's number
Reorder the compatible vop devices to be sorted by chip number
in ascending order.
Reviewed-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
[seanpaul added commit description per tfiga's review] Signed-off-by: Sean Paul <seanpaul@chromium.org>
Mark Yao [Wed, 20 Apr 2016 06:18:16 +0000 (14:18 +0800)]
drm/rockchip: vop: add rk3399 vop support
There are two VOP in rk3399 chip, respectively VOP_BIG and VOP_LIT.
most registers layout of this two vop is same, their framework are both
VOP_FULL, the Major differences of this two is that:
VOP_BIG max output resolution is 4096x2160.
VOP_LIT max output resolution is 2560x1600
VOP_BIG support four windows.
VOP_LIT only support two windows.
RK3399 vop register layout is similar with rk3288, so some feature
can reuse with rk3288.
Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
Mark Yao [Wed, 20 Apr 2016 06:18:15 +0000 (14:18 +0800)]
drm/rockchip: vop: introduce VOP_REG_MASK
Some new vop register support mask, bit[16-31] is mask,
bit[0-15] is value, the mask is correspond to the value.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
[seanpaul masked 'v' per tfiga's review comments] Reviewed-by: Mark Yao <mark.yao@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
Mark Yao [Mon, 15 Aug 2016 21:48:29 +0000 (14:48 -0700)]
drm/rockchip: sort registers define by chip's number
No functional changes, sort the vop registers to make
code more readable.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
[seanpaul resolved conflict with name change from _3066 to _3036] Reviewed-by: Mark Yao <mark.yao@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
This adds a function that also takes the console lock before calling
fb_set_suspend() in contrast to drm_fb_helper_set_suspend() which is
a plain wrapper around fb_set_suspend().
Resume is run asynchronously using a worker if the console lock is
already taken. This is modelled after the i915 driver.
Chris Wilson [Mon, 22 Aug 2016 20:44:52 +0000 (21:44 +0100)]
drm/fb-helper: Fix the dummy remove_conflicting_framebuffers
We always need to remove conflicting framebuffers if any other fb driver
is enabled, and not just if we are setting up an fbdev ourselves.
Unfortunately remove_conflicting_framebuffers() was incorrectly stubbed
out if !fbdev rather than !fb leading to major memory corruption (and
corrupt filesystems) upon boot.
Fixes: 44adece57e26 ("drm/fb-helper: Add a dummy remove_conflicting_framebuffers") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: tomi.valkeinen@ti.com Cc: dh.herrmann@gmail.com Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160822204452.2509-1-chris@chris-wilson.co.uk
Alexandre Demers [Mon, 22 Aug 2016 00:38:41 +0000 (20:38 -0400)]
drm/amdgpu: Use correct mask in dce_v8_0_afmt_setmode() and fix comment typos.
We were using the same mask twice. Looking at radeon, it seems
we should be using HDMI_AVI_INFO_CONT instead as the second mask.
Being there, fix typos in comments and improved readability.
I haven't looked at other DCEs, the mask may also be wrong for them.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 16 Aug 2016 12:43:17 +0000 (14:43 +0200)]
drm/amdgpu: cleanup amdgpu_vm_bo_update params
Make it more obvious what we are doing here.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 15 Aug 2016 12:08:54 +0000 (14:08 +0200)]
drm/amdgpu: stop adding dummy entry in amdgpu_ttm_placement_init
AMDGPU_GEM_CREATE_NO_CPU_ACCESS and AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED are
obviously mutual exclusive. So stop adding a dummy entry without effect when
both are specified.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 15 Aug 2016 12:06:50 +0000 (14:06 +0200)]
drm/amdgpu: cleanup amdgpu_ttm_placement_init
Make it more clear what this function does. No intendet functional change.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 17 Aug 2016 11:44:20 +0000 (13:44 +0200)]
drm/amdgpu: fix lru size grouping v2
Adding a BO can make it the insertion point for larger sizes as well.
v2: add a comment about the guard structure.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Thu, 18 Aug 2016 14:25:52 +0000 (10:25 -0400)]
drm/amd/powerplay: Tidy up cz_hwmgr.c
Clean up whitespace and formatting.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Wed, 17 Aug 2016 21:58:58 +0000 (23:58 +0200)]
drm/amdgpu: add AMDGPU_INFO_NUM_EVICTIONS
For profiling.
v2: really bump the minor version
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: recover vram bo from shadow after gpu reset V2
V2:
1. don't directly submit to many jobs at the same time.
2. delete unrelated printk.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chunming Zhou [Wed, 17 Aug 2016 03:41:30 +0000 (11:41 +0800)]
drm/amdgpu: link all shadow bo V2
V2:
1. use mutex instead of spinlock for shadow list, since its process could
sleep.
2. move list_del to bo destroy phase.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chunming Zhou [Mon, 15 Aug 2016 03:46:21 +0000 (11:46 +0800)]
drm/amdgpu: update pt shadow while updating pt V2
V2:
move shadow parameter to amdgpu_pte_update_params.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: minutemaidpark@hotmail.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chunming Zhou [Mon, 15 Aug 2016 03:36:54 +0000 (11:36 +0800)]
drm/amdgpu: update pd shadow while updating pd V2
V2:
Checking if shadow is valid.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chunming Zhou [Thu, 4 Aug 2016 08:51:18 +0000 (16:51 +0800)]
drm/amdgpu: sync bo and shadow V3
Use shadow flag to judge which direction to sync.
V2:
Don't need bo pin, so remove it.
V3:
1. Split to two functions, one is backup_to_shadow, another is
restore_from_shadow.
2. Clean up previous shadow direction difinitions.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chunming Zhou [Mon, 15 Aug 2016 02:46:04 +0000 (10:46 +0800)]
drm/amdgpu: add direct submision option for copy_buffer
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / mirror_ubuntu-jammy-kernel.git / log